AuthorsMinhas, P., Verma, K.A., Dogra, Israr, M.Satyanarayana Gupta, M., Garre,Chandrababu, D.V.S., Ravindra, TBoya, T.K., Bagha, A.K.Mubashira Anjum, A.Anand, P., Vyas, G., Dondapati, Satyanarayana, C.P., HanumanthSingh, L.P., Mann, G.S.Singh, M., Majid, M., Akhtar, M.Panwar, V., Shweta, S., Chawla, Logesh, K., Bupesh Raja, V.K.Musalaiah, G., Shireesha, Y., BaSaini, S., Kumar, S., Pandey, S.,Kalaiarasan, G., Mannayee, G., Ramesh, P., Jakkena, C.S., KarthGupta, V., Choudhary, B., MorganPraveenKumar, S., Dondapati, R.Sandeepa Sarma, K.L.N., VenkateAlekhya, N., Prabhu Kishore, N.Kharbuki, M., Malik, A.Lisdiyono, E., Asyhar AssalmaniBoopathy, G., Vijayakumar, K.R.Kalsia, M., Dondapati, R.S., UsurKrishnaraj, J., Sangeetha, K., BShrivastava, A.K., Kumar, S., KuShankar, V.Ashok Reddy, K.Sivakumar, E., Isam Rashad, T.KRaja, T., Anand, P., Karthik, M.,Ranjan, C., Akhtar, S.J., Tiwari,Bhagwat, P.M., Ramachandran, MAnand, P., Vyas, G., Dondapati, Unni Krishnan, A., Joselin HerbeSingh, J.I., VikasDhawan, Singh, SNazir, O., Rasool, M.A., Nabi, S., Kumar, V., Gupta, S., Sachdeva, Shashikiran, G., Harish, K.R., NilSingh, H., Kang, P., Jain, P.K., DSeshagiri Rao, G.V.R., Naveen KSoundar, M., Anand, P., RameshSantra, K.Gharai, S.K., Layek, A.Issac, S.S., Mani, A.Snigdha, M., Satya Sandeep, C., Ravi Babu, S., Sambasiva Rao, GNaveen Kumar, G., Seshagiri Ra

Saini, V., Kumar, A., Verma, K.N.Shrivastava, A.K., Kumara Swamy,Singh, J., Bagde, P., Soni, S., VerVerma, K.A., Kumar Swami, S.K., Manikandan, K., Chandran, J., DeDepuru, S.R., Mahankali, M., NaRajendra, S.K., Ramesha, C.M.Kumar, A., Chauhan, N.Pushpa Rani, K., Jhansi, M., ChAnanda Rao, G., Babu Tanneru, MPoongavanam, S., Sait, M.I., SrDasgupta, S.S.Sorooshian, S., Fen, T.A.Rawoof, M.A., Laxma Reddy, D.,Sharma, A., Srivastava, S., KumarIndriastuti, H., Nugroho, B., ArDhamneya, A.K., Rajput, S.P.S., Sarker, S., Midathada, A., RavellSingh, P., Singh, J.Sisodia, H., Sharma, P.Monica, T., Kamalakar, K., Girish,Singh, J., Singh, M., Ghubade, A.Yammanur, S.S., Shaik, K.M., GadKrishna, A.B., Pawgi, A.P., GuptBhat, A.H., Navaneethan, R., VaSundaramali, G., Karthikeyan, S.,Kumar, A., Singh, S., Chand, R., Chawla, R., Sharma, S., Bansal,Sharma, A., Singh, J.Kumar, K., Gulati, P., Gupta, A., Duggal, R., Jilte, R.Jaffri, A.J., Bhat, M.W., Vyas, GRajendra Prasad, A., Krishnaraj,Archana, K., Bhaskara Reddy, P.,Gopakumar, R., Rajesh, R.Parmar, V., Rejinmon, R., Roy, RKumar, R., Singh, A., KumaraswamNatesan, M., Jeyanthi, S., SivasaKushwaha, A., Singh, R.Tamizh Selvan, R., Jacob, J., WilKumar, U., Kumar, R., Mittal, A.Tamizh Selvan, R., Sidhharth, L.,Tetali, D.R., Kiran Kumar, G., RaDevendiran, S., Venkatesan, K., BRamesh, V., Anand, P., SoundarSrinivasa Rao, P., Prasad, C.L.V.Daruka, P., Agarwal, T., Sharma,Handa, D., Dondapati, R.S., Usur

Jeyaraman, P., Arun Kumar, K., AThakur, R., Singh, J.Arun Reddy, G., Navya Sree, S.,Sravanthi, G., Satya Sandeep, C.Chiranjeeva Rao, S., SaravanakuBansal, A., Ansari, S., Sharma, S.Sirisha, N., Kiran, K.V.D.Rajput, V., Goud, M.M., Samir, SShiva Prasad, U., Rathan Babu, Dhammi, S., Dugala, N.S.Venkata Rao, T.Rokkam, A., PraveenKumar, S., VDurga Sri, B., Nirosha, K., PriyaDubey, K.M., Sharma, S.Jagadishwar, K., Sudhakar Babu,Tiwari, S., Bhaduri, S.Navya Sree, S., Sandeep Kumar, Bhat, R., Lee, K.S.Reji Kumar, R., Sivapragash, M.Rajesh, D., Balaji, V., Devaraj, A.Poongavanam, S., Sait, M.I., SrSenapati, P., Padhy, M., Sahu, T.Jannet, S., Raja, R.Sharma, S., Singh, J.Arun, V., Rawoof, M.A., ParamkuBalaji, S., Khan, H., Janga RedSingh, H., Bahl, A., Kumar, A.Supriyanto, H., Maftuhah, D.I.Ravi Sekhar, S., ChittaranjandasJakkena, C.S., Ramesh, P., KarthiKumar, R., Nandu, A., KumaraswaVenugopal, L., Geeta Krishna, P.Tripathi, A.M., Sharma, A., PatraKshirsagar, R., Shoor, S.Chawla, R., Sharma, S., Bansal,Raheja, G.S., Trehan, R., Bansal,Rajput, R.S., Gangele, A., Israr, Rao, K.S., Nishanth Rao, K., PaGouse, S., Madhuravani, B., SwaSingh, G., Kumar, R., Singh, M., SSuhasini, U., Chinnamaddaiah, K.,Krishna Sai, B.L.N., Navya Sree, Vijaya Sekhar Reddy, K., Rao, T.Musalaiah, G., Suresh, B.V., TaSeshagiri Rao, G.V.R., Gupta, A.Singh, B., Midunkumar, V., KumaVohra, M., Nathani, V.K., Kumar, Venkata Srinivasa Rao, K., Uday

Patel, R., Duran, S.K.Mgonja, C.T., Saidi, H.Venkata Rao, D.Vasudev, V., Kumar, A., Saini, V.Ramanathan, P., Srinivas, V., SivBabu Tanneru, M.V., Yerra, L., VBhat, M.W., Jaffri, A.J., Vyas, GSharma, A., ManiTripathi, A., ChSamuel, T., Hanumantha Rao, Y.Singh, B., Kumar, P., Kumara SwaVadlamudi, S.B., Rao, K.S., SiridhSharmila, G., Kumar, N., MaheswaJhansi, M., Pushpa Rani, K.Agarwal, R., Dondapati, R.S.Naresh Kumar, D., Shravan KumLokesh, S., Lakshmi Tulasi, C.H.,Nema, A., Kannan, G., Jagan Raj,Prakash, S., Prashanth, B., SeshaBalaji, S., Janga Reddy, M., KhanGonzález-Lezcano, R.A., GuzmÃBal, J.S., Arora, T.P.S., Kaur, R.SaiGopiKamepalli, M., MisbahBasVijaya Sekhar Reddy, K., Rao, T.Prabhu Kishore, N., Alekhya, N., KSingh, P.B., Singh, M., Phull, G.SPrasad, K., Anjaneya Prasad, B.Poongavanam, S., Sait, M.I., SrRavi Kanth, T.N., Shravan Kumar,Patil, N., Prasad, K.Mastanaiah, M., Hemachandra ReRasool, M.A., Nazir, O., Kaur, M.Singh, R.S., Francis, E.R.C.Gadekula, R.K., Uppada, V.R., KuShoor, S., Rosy, R., Kumar, R.Srikanth, V., PraveenKumar, S., Kambala, S., Mohammad, I.Gadgey, K.K., Dey, S.Vineeth, G., PraveenKumar, S., VKumar Sai Tejes, P., AppalanaiduRama, B., Sai Prasad, K., PrabhaAkula, U., Nanavare, V., BhumireShravan Kumar, K., Ravikanth, TRamakrishnan, S.K., Vijaya KumaShravan Kumar, G., Naresh KumaKumar, A., Verma, K.N., UsurumarVasudheva Reddy, N., Arun, V.,Muralidhar Bathula, V.A.S., ThadBharadwaj, M.P.S., Sudhakar Ba

Choudhary, B., Gupta, V., MorganHanda, D., Dondapati, R.S., UsurPurohit, U., Mathur, A., DondapaRajesh Prabha, N., Edwin Raja DMalar Selvi, B.N., Edwin ThomsoRamesh, T., Karthik, K., Ganesh,Thadela, S., Dondapati, R.S., RaoGupta, A., Gulati, P., Singh, J., SJayan, R., Shameem, A.Dhana Raju, V., Kishore, P.S.Kumar, S., Ravella, U.K., ShrivaNandhakumar, R., Magesh, R.Laxma Reddy, D., Nishanth Rao, Rathi, R., Singh, M., Singh, M.Kumar, R., Dugala, N.S.Kumar, R., Singh, M., Singh, P.,Duggal, R., Jilte, R.Karyamsetti, S., Ananda Rao, G., Verma, T., Bhore, S.P.Srivastava, R.K., Rai, A.K.Gupta, S., Kumar, V., Jaisawal, ASulochana, G., Venkata Prasad, Sura, S., Sawale, A., Gupta, M.S.Jeyabalan, H., Ooi, C.S., Hui, K.Shukla, A., Navratra, N.D.Benhadou, B., Benhadou, M., HadKapoor, S., Chakraborty, P.S.Rao, P.D., Nageswara Rao, B.Chintalapudi, B.T., Gonuguntla, C.Rao, P.V., Kumar, B.S.P., Reddy,Jacob Raglend, I., Dev Anand, MRaj Kumar, E., Narendiranath BaRaju, V.N., Sivakumar, P., NarayanMgonja, C.T.Sivakumar, P., Nagaraju, V., SuKalaiprasath, R., Elankavi, R., Reddy, K.S., Gopal, G.S., KishoreTeja, N.S., Kiran, N.J.A., Teja, P.SSenthil Anbazhagan, A.M., Dev Rama Prabha, D., Narendiranath Teja, K.M.V.R., Ali, S.M., Varma, Garg, N., Mohanty, N., Mohanty,Umar Rizwan, M., Mohamed Arif,Shameem, A., Charith, B.Prasad, N., Ramachandran, A.Vijaykumar, M.S., Saravanan, R.Raju, B.R., Rao, K.P.V.S.R., SurajChavan, A., Deshmukh, B., Pawar

Tibbie Pon Symon, V.A., Jacob RagVijaya Kumar, T., Ramana, K.V.,Srikanth, D., Murali Krishna, M.VMilka, J., Surde, A.N.Nagaraju, V., Sivakumar, P., SreVijay Teja, G., Narasimha Rao, KSandeep Kumar, K., Prasad, N.E.CJanarthanan, S., Balaji, D., KartChouhan, S.G., Shaik, S.A., ReddPadmavat, C.S., Yarasu, R.B., KSrilakshmi, S.R., Reddy, K.S.M., Pragadeeswaran, G., AbdulGhaniYeswanth, I.V.S., Andrews, A.A.EAlam, S., Khan, T.A.Kolli, M., Basha, S.K., Rao, D.M.Kalmegh, A.P., Khodke, P.M.Kumar, G.N., Reddy, V.M., ReddyLevin Daniel, J.V., Daniel, C., ShDiju Samuel, G., Edwin Raja DhasKumar, P.A., Nageswararao, M.,Karthik, M., Rao, K.T., Nath, B.APrakash, B.S., Sree, M.L., SaranyaYesaswi, C.S., Subrahmanyam, T.,Sai, K.R., Naidu, D.G., Mahendra,Bhaskar, D., Reddy, C.S.S., ReddyAnirudh, M.S., Asif, S.N., NadellSanthisree, N., Kumar, P.S., AshoPriya, B.K.Babu, K.R.P., Prasanth, K.F.V., SMoorthy, C.V.K.N.S.N., BharadwajYadav, D.K., Kumar, S., Reddy, YKumar, T.V., Jayashankar, G., SriSreenivasulu, S., Venkatesulu, MSai Teja, D.V., Rao, Y.V.H.Diwakar, G., Narayana, N.V.S.S.L.Janjanam, N., Babu, K.R., ChowhaSetu, G., Sandeep, B.S., Kumar, ARanganath, N., Panchakshari, H.Vijetha, T., Karthik, R.Teja, N.S., Anvesh, B.Y., Mahesh,Gopu, P., Dev Anand, M.Karthik, R., Jyothi, K., Vijetha, THussain, S.A., Pavan, M.S., SandTeja, K.M.V.R., Kunjunath, B., CSaleh, H.M., Mina, E.M., AbdelmLokesh, K., Somasankar, N., AzhNagabhyrava, R., Kota, S., Geda, Patel, M.P., Patel, H.C., Deheri,

Kumar, T.V., Niranjanreddy, S., SKumar, B.S., Krishna, B.S., PrasaGupta, P.V.K., Reddy, J.P., SaradKhade, S.Rajesh, R., Dev Anand, M., BennRao, K.S., Kumar, K.P., Kumar, B.Rao, D.M., Teja, C.D., HarshadeeMocherla, E.P., Netto, W.Jayaram, K.G.V., Raghukalyan, V.Kumar, P.J., Narne, S.K., Talluri, Pugazhenthi, N., Thamilarasan, JKumar, G.A., Kumar, C.N., Raja, SRamanan, G., Edwin Raja Dhas, J.,Jyothi, K., Amareshwar, E., VijethSanthisree, N., Prashanthkumar,Ramabalan, S., Saravanan, R., KrSeelan, K.J., Rajesh, R., Liji, R.F.Bharath Subramaniam, S.Teressa, T., ChanduSagar, A., SaiLakshmi, K., Surendar, A.Dabhole, S.S., Kurundwad, C.A., Tak, R., Kumar, S.Y., Rajpurohit, Shah, R., Shah, C., Thigale, S.Nageswararao, M.Aikhuele, D.O., Ansah, R.H., SorVijaykumar, M.S., Saravanan, R.Neela Rajan, R.R., Rajesh, R.Ranjan, C., Akhtar, S.J., ChoudhaKolli, M., Basha, S.K., Midatana,Teja, K.V.M.R., Sreeram, K.H.M.Choudhary, S., Rana, S.C.Shameem, A., Charith, B., RamaArif, M., Rizwan, U., VigneshwarRanda, R., Tiwari, A.C.Subbaiyan, K., Kalaiyarasan, V.Thapa, D., Mishra, A., Sarath, K.Kezia, P., Sai, B.L.N.K.Sandeep, G., Dattatreya, G., LakMoody, K.A., Lal, R.R., Pandey, VPrameela, N., Tulasichitra, N., KaKumar, M.N., Akhil, V.H., Raju, Salih, M., Oubrek, M., Salih, A.,Baburaja, K., Kishore, D.S.C., DasaBenhadou, B., Benhadou, M., HaRao, K.S., Krishna, M.R., NithesKoundinya, V.K., Rao, Y.V.H.Rao, M.N., Krishna, D.H., TriyapTeja, N.S., Babu, K.D., Nagendra,

Vivek, R.N., Kumar, K.D., SreekaBaburaja, K., Kumar, G.A., VenkGautam, M., Tiwari, A., Chauhan, Dhorta, D., Gill, J.S.Vemula, A.M., Reddy, G.C.M., HGhosh, S., Pati, B., Ghosh, R., PSafraoui, L., Benhadou, B., HaddAbraham, M.K., Pandey, V., Lal, Jain, A.K., Mishra, P.M.Balaji, E., Mouli, D., RajasekaranQuasim, Md.T., Meraj, M.Jeya Prakash, D., Vijaya Kumar, Hemanth, G., Prashanth, B., BenSanket, S., Modi, S.K., Chetan, VPuthumana, A.B., Paulose, P., RaAlam, S.S., Qamareen, A., VarshJoshi, S., Gill, J.S.Rao, K.H., Gopichand, A., Kumar, Mgonja, C.T.Josephbeskhi, V., Prabhu, K.V., Vinay, P., Venkata Satya Sri VamNandish, R.V., Madhu, E., VizhiaSubhashini, T., Kumar, N., ThanHui, K.H., Lim, M.H., Leong, M.S.Chandrasheker, J., Vidyasagar, BThammannagowda, A., VenkateshPugazhenthi, N., Paul, D.L.B., KaPaul, A., Ahmad, Z., Mohanta, ASubhashini, T., Maheswari, P., SPratheek, G.V., Mahadev, M., RohJeykrishnan, J., Nathan, S.J., KarReddy, N.V.R., Reddy, K.S., BashBhaskarwar, V., Gholap, T.A., GaiSumanlal, M.R., Kumar, S.N., MBukkarapu, K.R., Jyothi, Y., Raju,Ram Vignesh, B., Kalaiyarasan, Duduku, M.R., Narayana, K.L., RSatyanarayana, D., Pramila DeviBukkarapu, K.R., Chakravarthy,Khidir, E.A., Basha, S.A., Al-AssPathak, K.K., Giri, A., Lingfa, P.Abhishek, H.A., Kumar, N., Irfan,Saravanan, S., Karthickeyan, N.KMastanaiah, M., Reddy, K.H.Abid Ali, M., Srinivas, S., JayantBukhari, S.M., Hussain, M.M.Shah, N., Purani, M., Patel, V., PSingh, J., Tyagi, M.R.

Rao, K.S., Kumar, M.P., Prasad, SElavarasi, R., Senthil Kumar, P.KSijo, M.T., Jayadevan, K.R., JanKumar, U.U., Reddy, A.N., SoumPatil, R., Deepak, D., Dharshan Sathishkumar, S., Hemanathan, RMgonja, C.T.Mercy Soumya, V., Navaneetha, Ansari, A.R., Rana, P.K.Vijay, J.J.C., Lawrence, A., ArtPalanisamy, R., Sathish Kumar, SChavan, D.K., Gorantiwar, A.S.,Jadhav, P.Jani, H.R., Patel, H.C., Deheri, GSen, A., Majumder, M.C., MukhoAnanth, S., Vijayakumar, P., GurAbedin, Z., Rizia, M., Enam, H.MPhilip, P., Mani, A.Abhishek, G., Senthikumar, C.B.Karthick, M., Sundarraj, M., RajaMahesh, L., Sudheer Reddy, J.,Karthikeyan, P., Sathish Kumar, SGovinda Rajulu, B., Kannam NaidMate, A.S., Kumbhar, V.Gorde, M.S., Borade, A.B.Gadgey, K.K., Bahekar, A.Abhishek, Kumar, D., Karthik, A.Muniamuthu, S., Karthikeyan, T.Issac, S.S., Mani, A.Ansari, A.R.Sahu, S., Choudhury, B.B.Fernandes, I.Murali Mohan, V., Karthikeyan, Amani, M.A.H.Bharani Chandar, J., Lokeshh, M.Dmello, S.S., Biju, J., Hegde, S.SNaga Kishore, S., Venkateswara Srikaran, V., Venkatachalam, C.TMadhukar, S., Reddy, B.R.H., ReShekhar, C., Mahajan, S.R., ChavMatey, S., Prajapati, D.R., ShindShrirao, P.N., Pente, S.S., GaddHasan, A.K.A.Chiatti, G., Chiavola, O., Recco, Saurabh Jha, P., Khan, M.S.Naveen Kumar, G., Mohana ReddGanesh, J., Renukadevi, P., VijaTamrakar, R., Mittal, N.D.

Meenakshisundaram, R., KalaiyarVeerakumar, P., Dheepak, M., SYogesh, P., Arun, C., ArunkumarDhivakaran, S., Sudhahar, M., VSathishkumar, S., Swaminathan, Karthickeyan, N.K., Arun, S., MoThakkar, P.L., Patel, H.C., DeherSudhakar, U., Raju BahubalendrunSingh, R.K., Sharma, R.V.Veena, P.H., Vinuta, D., Pravin, Madhusudhan, T., Senthil KumaRoy, U., Majumder, M.Swami, V.B., Dhawale, S., More, Sehgal, A., Aggarwal, V., Sehgal,Giridharan, R., Kumar, P., VijayaJohnson, A., Prasad, S., Sharma,Sawant, S., Prajapati, D.Sood, A., Vyas, S.Bharath Subramaniam, S.Gadgey, K.K., Bahekar, A.Anil Kumar, B.K., AnanthaprasadKumar, S., Prasad, R.K., Singh, KKumar, S.R., Ahamed, Md.I., SinghPrasad, T., Chennakesava ReddyMadhusudhan, T., Senthil KumaPanchal, S., Rawat, L.S.Shah, V., Dhokai, S., Patel, P.Kalagi, G.R., Patil, R., Nayak, NKarthikeya, K.Raju, N.S.R., Prasad, V.J., KamalMounika, M., Ravindra, K.Ramesh Kumar, R., ThiruvengadaJadhav, S., Venkat Raj, V.Rajamanickam, C.S., TamilselvanSingh, B.B., Dubey, R., Rai, A.K.Raut, N., Rathod, A., Ruiwale, V.Anjaneyulu, B., Nagamalleswara Vamsi Durga Mohan, G., Rao, K.S.Sravan Kumar, G., Azad, D., MohaKumar, R.R., Kumar, A., Kumar, Joe Ajay, A., Elizabeth AmudhiniArun, S., Nagoorvali, Sk., SunilDubey, A., Rai, A.K.Deomore, D.N., Yarasu, R.B.Elankavi, R., Kalaiprasath, R., Sanaka, S.P., Venkateswarlu, A.,Sharma, S.K., Shukla, D.D., KhatriPervan, N., MeÅ¡ić, E., ÄŒoliÄ

Harish Kumar, S., Laxman Rao, KElnaeim, M.I., Leong, M.S., AlfatDivyaranjani, R., Rajasekar, D.Kumar, V.Bridjesh, P., Subramanyam, B., Thakur, R., Kumar, A., Nadda, R.Muralidharan, S., Karthikeyan, N.Sapthagiri, S., Jayathirtha Rao, KSuresh, R., Vivekanandan, S.Selvaganapathy, M., NishavithriBlumenthal, S., Freitag, M.H.Batakurki, R., Chandra Prasad, B.Kamal Kr, B., Dimbendra Kumar,Bharath, V.G., Patil, R.Girish, S., Lavanya, K., Geeta KriDayaker, P., Madan Reddy, Y., Lakshmi, V.V.K., Subbaiah, K.V., Kumar, S., Sehgal, S.S.Rathod, A., Raut, N., Patil, S., KChinnamaddaiah, K., LakshmipathHegde, R., Sivaram, N.M., AjaykumMadan Reddy, Y., ChandrasekharSagar, K.V.Khidir, T.C.Rengamani, J., Shameem, A.Krause, O., Hartung, M., SchneidAndriyansah, Aryanto, V.D.W.Glasziou, P.Panday, R., Mohanty, S., Gulati, Sunil, K., Kiran, J.K.Sawale, A., Sura, S., Anitha, D.Kumar, M.S., Kumar, R.R., AlphonRamanan, G., Neela Rajan, R.R., Narendiranath Babu, T., ShivasaiArun, K., Aravindh, K., SomeshwaMohd Saif, Er., Tariq, M.Musalaiah, G., Suresh, B.V., SrinSreenivas, P., Anil Kumar, R., SreMohanam, K., Kumar, A.S., Raja, Ganesh, R., Karthik, K., ManimaBabu, C.V., Vykunta Rao, M., SuReddy, K.V.S., Yerramilli, S., ShaSuresh, B.V., Musalaiah, G., SrinSaufi, M.S.R.M., Ahmad, Z.A., LGanesh, M., Bindu, G.H., Kumar,Praveen, J.E.D., Robinson Smart, Ghofur, A.Karajagikar, J.S., Sonawane, B.U

Dhanajayan, G., Kalavagunta, V.Jagadish, S.P., Dinesh, K.R., TMunusamy, P., Balaji, R., SivakaMenon, Y.K., Jayakumar, J.S.Chenot, J.-F., Becker, A.Ihr, H.Subashini, M.M., Karthik, R., DaBanerjee, T., Bandyopadhyay, A.,Maheswari, E., Balaji, V., DeepaAnuradha, M., Sailaja, C., ChittaHölzel, L.P., Frank, F., BjerregaGrözinger, M.Khan, N., BaluNaik, B., YousufudMirgissa, A., Mesele, A., Lemma,Sunil Kumar, K., Palanisamy, R.,Srividya, K., Nagaswapnasri, M.,Aatthisugan, I., Vignesh Kumar, Kochen, M.M.Sunil, K., Kiran, J.K., Reddy, G.VShanmuganathan, A., Sivaram,Chandrasekhara Reddy, T., MadanZahra, F.Mareeswaran, S., Sasikumar, T.Alphonse, M., Kumar, R.R., KumarSingh, J., Raghuram, J.Prasad Nidumolu, E.C., Sandeep KRout, K.C., Sharma, S., ChoudhurArdak, P.S., Borade, A.B., BetlejMohana Rao, Ch., Mallikarjuna RVelu, M., Tidole, A., Mehra, P., KReddy, G.V., Sunil, K.Juliyana, S.J., Prakash, J.U., KartShrimali, A.K., Soni, V.K.Garad, A., Shinde, V.J.Sethy, N.K., Behera, D.K.Srikrishnan, S., Dash, P.K.Bhanu Prakash, D., Krishnaiah, Prasanthi, P., Sivaji Babu, K., Ramanareddy, D.V., SubbaratnamLakshmankumar, A., BalasivaramaTaj, Prasad Nidumolu, E.C., GeetChugh, K.L., Alekhya, N., PrabhuMadhu, S., Krishna Chaitanya, A.Sandeep, M., Kiran, S., Kumar, PTonday, H.R., Tigga, A.M.Megiso, T.D.Subramanyam, B., Bridjesh, P., Prasad, P.R.K., Reddy, P.R., Pras

Thamarai Kannan, M., Rupesh, P.LRamu, S., Srinivasan, R., SomasKumaar, R.K., Kannan, G., BoopaSaadouki, B., Nattaj, J., ElghorbGehring, S.C., Kandzora, J., JeskKumari, S., Kumar, S.Y.Yerra, L., Chinnamaddaiah, K., Nalini Deepthi, A., Ravikanth, T.Kumar, R., Srivastava, Rai, A.K.Sathish Rao, U., Rodrigues, L.L.RYadav, A., Singh, S., Joshi, L.C.Krishna, G.R., Kumar, K.M., VeSai Nikhil, Y., Dinesh Goud, P.,Firdaus Isham, M., Salman LeongSaleem, M., Gopi, E., RajagurunatSwamy, S.M., Panndurangadu, VPushpakumaran, S., BalamurugaSailaja, C., Anuradha, N., GeetaSrivastava, A.K., Sati, K.C., SinghSinha, S., Ballav, R., Kumar, A.Sai Prasad, K., Prabhakar Reddy,Del Real Romero, J.C., Jimenez, Ranganayakulu, S.V., Narsaiah, JWangler, J., Jansky, M.Srinivasa Rao, P., Bhanodaya ReRathan Babu, A., Shiva Prasad, Raja Roy, M., Ramanaiah, N., SuGhosh, S., Ghosh, R., Patel, B., Sandhya Rani, B., Ramesh, A., SEdossa, S.K., Singh, A.P.Ramana, E.V., Sapthagiri, S., SrinMien, T.L.Harikrishnan, R.Tejaswini, N., Poorna Sai, R., RPadmavat, C.S., Yarasu, R.B., KAnand Raju, F., Deva Kumar, M.LKumar, K.S., Arun, S., Mohan, ARamana, E.V., Sapthagiri, S., SrinPrakash, D.B., Krishnaiah, G., ShPatel, K., Patel, M., Oza, N.Roji, Y.Kirana Kumara, M., Math, M.C.Saritha, V., Kachare, V.G.Bhakiyaraja, S., Vaithyanathan, SChaphalkar, S.P., Khetre, S.Hemadri Naidu, T., ChannakeshaHarikrishnan, R.Periasamy, M.

Kumar, J., Nair, C.G.K.Ahmed, S., Jayakrishnan, N., GaKumar, P.V.S., Reddy, B.C., ReddDiouf, E.Altaie, H.Kumar, M.P., Reddy, K.A., BhaskRamarao, M., Vivekanandan, S.Sanga, F.M.Alloli, R., Dharmavarapu, P., SraSrivastava, S., Jha, U., Singh, K.VSingh, D.Shah, S., Dake, P.Shekar, C., Pattar, N.B.D., KumarSingh, D.Sivaiah, S., Tulasi Lakshmi Devi, Shanmugapriya, M.Senthil Kumar, M., VivekanandanSrivastava, R.K., Rai, A.K.Rajesh, N., Yohan, M.Sravan Kumar, G., Azad, D., MohKumar, K.S., Raju, B.N., ArulmaniPawar, A., Vajre, S., Patil, S., BSireesh Kumar, G., Rao, C.J., SrKolekar, A.B., Datye, A.B., BhosaPrakash, D.B., Krishnaiah, G., ShSharma, D., Khatri, A., Mathur, Wani, K.Nafees, K., Mohammad, A.Kar, M.K.Murali Krishna, V.Ramakrishna, G., Srinivasa Rao, Dharniju Reddy, T., YedukondaluSekar, C.A.Raju, M., Seetharamaiah, N., PRama Krishna, K.B.S.S., NagarajuRasool, Md.A., Hafeezuddin, Md.Muniamuthu, S., Raju, N.L., SathVerma, G., Kumar, S., Bundel, B.Sathishkumar, S., Kannan, M., AAcharya, D., Bajracharya, T.R.Tummalapalli, M.K., Kommula, S.RKumar, M., Paul, B., Yadav, D.S.Jain, R., Goyal, P.Shukla, A.S., Kumar, S.Patil, R., Goel, V.K., Saran, V.H.Varma, Y.K., Madhukar, S., AkhilSunil, T., Sandeep, M., KumarasDewanji, P.

Parise, D.P., Murty, A.S.R.Suresh, J.S., Devi, M.P., MohamPrabhu, B.D., Ramesh, A., VenkatMalu, D., Katare, N., Runwal, S.,Ansari, O.A., Rao, P.S.Marini, D., Cunningham, D., XiroNutalapati, S., Azad, D., Naidu, Kumar, R., Mishra, M.K., Singh, Bodh, A.M., Waghmare, G.H.Farooqui, M.L.A., Bheemanna, GMadhukar, S., Shravan, A., Sai, Takalapally, S., Kumar, S., PusuluLakshmi, B., Pradeep, G.V., NaraRajeev, D., Dinakaran, D., MuthSada, G.K.A., Khudhour, D.S., IsAlavala, C.R.Karthikeyan, M., Veni, S.Kalyankar, N.S., Shelke, R.D., BaPant, P.K., Gupta, A.K., Miyan, Anande, S., Chaudhari, A., RodgJain, P., Garani, H.Ghosh, R., Ghosh, S., Ghimire, SPatel, M.S., Mane, S.D., Raman,Mahto, J.N., Roy, S.C.Prajap, B., Dhakal, H., Regmi, MKumar, R., Mishra, M.K., Singh, PritiPuviyarasu, S.A.Dewanji, P.Salih, M., Oubrek, M., Salih, A.Kulkarni, S., Sharanappanavar, NSrivastava, P.K., Singh, A., SrivaSanghavi, A., Khan, U., Sen, S., SKharat, A.R., Kamble, S.B., Patil,Kumar, B., Bhakta, A.K., Singh, SJabur, L.S., Radhi, H.I., Mohsin, Sailaja, G., Seetharamaiah, N., Ramanamurthy, V.V., Krishna, L.Benhadou, B., Haddout, A., BenhBenhadou, B., Haddout, A., BenhVishwakarma, A.K., Singh, P.K., LAttarde, D., Chavda, A., Borkar, Naimuddin, S.K., Ahamad, M.T., Bijjargi, Y.S., Kale, S.S., Shaikh, Kumar, G.P., Seetharamaiah, N.,Kumar, J.S.U., Prasad, C., Rao, KDoraci, K., Hasanaj, A.Nayak, A., Ashwin, H.S., Murige

Pandey, N., Rai, A.K.Reddy, G.S., Hussian, M., SatyaLad, V., Singh, L.P.Sreehari, V.S., Muthanna, V., PrSherje, N.P., Deshmukh, S.V.Singh, P.K., Singh, L.P., Lad, V.Ingale, S., Kothawade, S., PatankBadkas, S.A., Ajmera, N.Kashid, V.R., Mane, A.M.Thakre, S.D., Zope, J.P., BachchuNaseer, F., Rai, A.K.Salih, M., Salih, A.Kamble, S.B., Burase, I.D., KharaReddy, N.V., Reddy, A.V.V.V., PrSingh, T., Bartaria, V.N.Manjunatha, R., Kumar, G., ChaNaimuddin, S.K., Ahamad, M.T., STiwari, D., Rai, A.K.Benhadou, B., Haddout, A., BenKothawade, S., Patankar, A., KulkBhaskar, B., Anand, S.N., KrishnMahdi, Q.S., Hussein, A.A.Kumar, S., Choudhary, A.K.S., AnPadagannavar, P.Awate, N., Tidke, D.J.Mkilania, J.N.Suryawanshi, P., Wadnap, S., PeSingh, M.P., Yadav, H.Abdullah, H.K., Aboud, S.M.Somashekar, S.M., Manjunath, VSingh, A.K., Rai, D.V.Sharma, P., Singh, M.P.Prabhu, T.Mkilania, J.N.Sachan, V., Rai, A.K.Mahdi, Q.S., Abdul-Hussein, K., Boudlal, E., Barakat, M., MouhibMohamed, A.D., Al-Dabagh, A.M.Patankar, A., Kulkarni, R., KothaSalunke, A.R., Kulkarni, N.S.Ul Hassan, M.Ramya, A., Vanapalli, S.L.Mruthunjaya, M., ParashivamurtVyas, S., Sethi, V.K., Chouhan, J.Krishnaiah, B.V., Balu Naik, B.Regmi, M., Pol, A., Kulkarni, S.Rai, A.K., Mohamed, S.A.Hadi, H.M., Mahdi, Q.S., Hussien

Vhangade, P.B., Sudhakar, D.S.S.Mahdi, Q.S., Mohammed, N.A.MSrivastava, N.K., Tariq, M., SrivaAskhedkar, R.R., Modak, J.P., VaSuresh, Veena, P.H., Pravin, V.K.Mohamad, B.A., Abdelhussien, Gurui Charan, U., Phanindra, P.DPrabhu, T.Mukhraiya, V., Yadav, R.K., Kori,Deshpande, S.S., Rawat, S.R., BTapase, R., Phutane, S., Pawar,Kumar, A., Singh, S., Barry, S., Dhakar, A., Ranjan, R.Sivakumar, M., Ranjith Kumar, M.Sivakumar, M., Vignesh, M., SridBorkar, N.M., Apte, S.A., DeshmSachan, V., Rai, A.K.Reddy, N.R., Reddy, G.M.Saini, M., Sharma, R., Abhinav, AKhayyat, H.A.Kumar, P.J.Bhasme, A.B., Kadam, M.S.Padagannavar, P., Bheemanna, Vasmate, S., Sreenuraju, M., KusDeshpande, S., Buke, M.Panayotov, D.T., Dimitrov, V.P., Deshpande, S.S., Desai, P.N., PaPiyush, P., Pandey, A.Malhotra, V., Kumar, Y.Al Raheimy, N.H.Ayade, M., Latey, A.A.Veena, P.H., Raveendra, N., PravBhagat, N., Kant, S., Tiwari, A.Quraishi, K.A., Khan, N.A.Jhod, V., Jumle, A., Apte, S., BorPrasad, G.S., Rajagopal, G., PrahUmamaheswararao, L., Ashif, MRamu, S., Abhilash, M., Ajay, M.Sahoo, S.K., Kumar, S., Yadav, P.Wankhade, N.K., Ikhar, D.R.Kadhim, Z.K., Kassim, M.S., AbduGandhare, S.N., Pathare, A.V., Pal, B.P., Rao, D.R.Bansod, P.J., Thakre, S.B., WanLal, S., Kharol, C.L., Jaiswal, C.Kumar, M.A., Rajesh, S.Krishnamoorthi, G., Srinivasan, Srikanth, D., Murali Krishna, M.V

Jaiswal, R., Jha, A.R., Karki, A., Yadav, R.K., Tembhurne, Y.K.Mikola, A., Kõiv, T.-A., Maivel,Khan, U., Sen, S., Dey, S., BanerjChandra, I., Yadav, S.K.Dandan, K., Ananiev, A., KalaykovSharma, A.M., Kumar, D., TamizMadhu Venkatesh, N., Purna SureBorade, S., Kadam, M.S.Srikanth, D., Murali Krishna, M.V.Gokhale, M.Y., Fernandes, I.Hampali, C., Bendigeri, C.Satyanarayana, V.V., Jagadesh KuKumar, R., Tembhurne, Y.K.Kamble, V.K., Wagh, K.N., WashiPal, B.P., Ramakrishna, K., JayaKadhim, Z.K., Mery, H.O.

Study of solar air heater having different geometries on both sides of absorber plateA survey and analysis of the relationship between human resources management and organizational Evaluation of joint properties of friction stir welded al/cu bimetallic lap joints fabricated by threaded to16 Bit multiplier implementation using vedic mathematicsChoice of optimal location of piezoelectric sensor on steel plate using mode shapesMultifunction mobile robot virtual humanEffect of Mass flow rate on thermohydraulic performance of hts cables with mixed cryogenDesign and analysis of high-pressure casing of a steam turbineExperimental study of effects of annealing process on machinabilty and tool life of drill bit for 20MNCRWear behaviour of smaw hardfaced mild steel and influence of dilution upon hardfacing properties.A comprehensive review of thermal spray coating for coal fired power plantsExperimental studies on impact strength of aa5052-mwcnt/ldh reinforced hybrid fibre metal laminateFlexural strength enhancement of glass fibre reinforced polymer compositeA review on various techniques used for self-healing in fiber reinforced polymer compositesAnalysis of hydraulics actuator speed control using digital hydraulicsImplementation of an adaptive approach for bio medical applicationsA reviewonsurface engineering modifications obtained using inconel-625.Parametric evaluation of thermophysical properties for a mixed refrigerant of propane and iso-butane inAnalysis of stress distribution on different sections under different loading and machining conditionsComparison of performance of conic and ramp inlet using cfdStudy on partial replacement of cement by fly ash, natural fine aggregates by sawdust, and coir as a fibBusiness activities and criminal responsibility of corporation according to the act no. 32/2009 conceFabrication and fatigue analysis of laminated composite platesConceptual design of high temperature superconducting (HTS) Cables: A reviewA mecanum wheel based robot platform for warehouse automationAnalysis of the barriers for implementing green supply chain management (GSCM) practices on organic iA finite difference approach to pressure distribution on fixed pad thrust bearing under isothermal condHeat transfer enhancement studies of copper oxide nano fluids in a round pipe with insertEffect of diethyl ether (DEE) on the performance and emission characteristics of a LHR engine using paEvaluation of mechanical properties of natural fibre reinforced composites - A reviewDesign and fabrication of tri rickshaw with solar charging stationMechanical, thermal and morphological characterization of coir reinforced poly butylene succinate coFeasibility studies on the use of mixed cryogens in hts cablesBiogas yield potential research of the wastes from banana by anaerobic digestionEffect of alkali treatment on mechanical properties of jute,sisal,banana,hemp and ABACA fibers for pCompression behavior of circular and rectangular rc columns retrofitted by gfrp laminates: An experimExperimental and numerical analysis of ground effect of a typical RLV (reusable launch vehicle)Experimental study on solution treatment, cooling medium and ageing temperature effects on mechanThe design and process control of electrochemical honing machine - A brief detailDesign and analysis of eddy current multi caliper disc brakeImproving thermal efficiency of diesel engine by using ceramic coating on cylinder liner and piston heaUsing structural equation modeling to assess the budget hotel performance in bali IndonesiaComparison of performance of artificially roughened solar air heatersRevising the intention of indulging customer relationship and revenue management in next of kin witDesign of fixture for the manufacturing of compressor rotor blade in aircraft engineExperimental investigation of natural convective heat transfer using water-Alumina nanofluid with tagAnalysis of nanoiron particles reinforced blended nanocomposite

Prediction of pressure drop and heat transfer in micro-heat exchangers with nano cryogenic fluids used Analysis of the barriers for implementing green supply chain management (GSCM) practices on organic iInvestigations on dimensional accuracy and surface finish of polyurethane replicas fabricated by siliconAluminum MMCS reinforced with HBN-reviewA cfd analysis for optimization of total disolved solids in impeller mixing solid waste anaerobic digesterDesign and control of standalone solar photovoltaic powered air cooling systemSynthesis of beryl reinforced aluminium metal matrix composites through vacuum sinteringReview on application of machine visionBest keyword cover search using keyword-nne algorithmDesign and development of acoustic refrigeration systemA study on financial performance of amana bankSteady-state dynamics of a flexible internally damped spinning shaftApplicability of manufacturing lean tools in service operationsA fast search block-based motion estimation algorithm for compression of motion picturesHeat transfer analysis of source/sink of an earth tube heat exchanger by cfd modelling and simulationSmall and medium enterprises' product benchmarking advantages on marketing performanceExperimental performance analysis of alternative cooling pad made by agricultural waste for direct evFriction and wear studies of heat treated plain bearing materialsExperimental analysis of performance and emission parameters using cerium oxide and silver nano-parA review on utilization aspects of natural and artificial fiber in flyash brickDesign and analysis of heavy trucks using cfdAnalytical hierarchy process for road accident of motorcycle in India: A case studyFeasibility study on dispersion of nano particles in liquid oxygen (LO<inf>X</inf>) as nano cryogenic Design and analysis of a bascule bridge using finite element methodExperimental studies on polymer modified steel fiber reinforced concreteThe effect of electrodeposition zinc-cobalt alloy coatings on the mechanical properties of pressure die Temperature dependent thermodynamic properties of diesel fuel surrogate at critical pressure for comEffect of vacancy defects on the mechanical properties of carbon nanotube reinforced polypropyleneThe study of strength characteristic of concrete by adding coir fibre and replacement of steel slagA review of friction stir processing of aluminium alloys using different types of reinforcementsStudy on heat loss characteristics of staggered aligned absorber tubesA review on the recent development in enhancing the thermal conductivity in nanofluidsAn approach to the development of a green energy farm using free flow horizontal axis water turbineATM robbery prevention by using sensor devicesEffect of fiber volume fraction on the abrasive resistance, compressive strength and hardness of bananAn approachto design and develop an eco-friendly bamboo bicycleInvestigation of microstructure of cyclically cryogenically treated specimens of SS316L and comparison A review on design of augmented wind turbine blade for low wind speed urban areaOptimization of cnc process parameters on inconel 625 using response surface methodologyPerformance evaluation and comparison of diesel and biodiesel blend of diesel engine fitted with ysz pMulti response optimization of parameters for wire edm operationStudies on physical properties of Biodiesel and blends from mustard oilA python tool for evaluation of subjective answers (aptesa)Fabrication and performance analysis of flame retardant and natural fibers reinforced compositesOptimization of machining parameters of ohns steel by using edmComparison of tribological properties of chromium steel based planar bearing material under coated Productivity improvement using MTTR and MTBF methodologyMesh sensitivity analysis on the kevlar-49/epoxy at room and cryogenic temperatures

Design and fabrication of thermostat valve for marathi alto vehicle using reverse engineeringStudy of performance of bituminous concrete with addition of COIR/coconut fiberModelling of bicycle fitted with two stroke petrol engineHot guard and plasma jet evaluation of c-ph and c-ph fused with zirconia compositesInfluence of nano added mme blends on ci engine based on doe concept3D electromagnetic field simulation of microwave joining of inconel-718Protection of encroachment on bigdata aspectsA review of developments in the selfhealing approaches of composite materialsParticulate laden flow simulation in three dimensional axial compressor stage used in aircraft engineProduction of mahua blo-diesel transesterification processUtilization of e - Resources in mechanical engineering departmental librariesComputational evaluation of pressure drop and heat transfer for a mixed refrigerant used for industrialGSM based fish monitoring system using IOTReview of mechanical properties of fiber reinforced cementitious compositesPerformance investigation of water and propylene glycol mixture based nano-fluids on automotive radDynamic analysis of rotor-bearing system for flexible bearing support conditionExperimental investigation on ci engine fuelled with the blends of olive oil methyl ester and dieselOptimization of the brake parameter for a disc brake system to improve the heat dissipation using taCorrosion behaviour of magnesium tricalcium phosphate composite in simulated body fluidAn investigation on effects of fatigue load on vibration characteristics of woven fabric glass/carbon Amana investment and Amana bank - A comparative study between Prepublic issue and post-public isCoating materials and methodologies for the protection of hydro turbine runnerMicrostructure analysis of friction stir welded aa 5083 and aa6061 t6 aluminum alloysImpact of partial replacement of cement with rice husk ash and proportionate addition of coconut fibrAnalysis of planar inverted-F antenna using HFSSAuthentication frameworks for enhancing security in biometric systemsApplication of time-series demand forecasting models with seasonality and trend components for indusA lean six-sigma manufacturing process case studyFriction surfacing process of stainless steel alloysPower generation system using handcrank and fitness analyzer by using labviewErosion wear of solid particles in 317 stainless steelExperimental investigation on hemp and sandwich fiber composites for delamination during drilling opA review on friction stir welding ofaluminium alloys: Mechanical properties and metallurgical observatComparative investigation on the transverse and longitudinal tensile properties of jute and banana fiMechanical and structural properties of carbon nanotubereinforced polycarbonateThe relationship between quality and quality cost for an OEM auto parts manufacturing industry in PuModeling and simulation for dynamic analysis of cam and follower of valve train system for the predictAn efficient multilevel motion estimation in video codingImproved network lifetime in wireless sensor networks using eliptic curve cryptographyDetection of crack initiation in the ball bearing using FFT analysisDevelopment of andro humanoid robot armPerformance and emission characteristics of 4-stroke diesel engine using used transformer oilHuman resources best practices and innovation; Role of knowledge management effectivenessDevelopment and mechanical characterisation of glass fibre reinforced polymer compositeImpact analysis of aluminium wheelSurface segregation of chromium carbide in stainless steel and its thermodynamic stability study by cyComparative study of two different organic PCMS for daytime and evening cooking with different load Analytics and techniques of biginformation management system

Performance characteristics of waste cooking oil produced biodiesel/diesel fuel blendsEffectiveness on implementation of maintenance management system for off-grid solar pv systems in publA subassembly identification method for optimal assembly sequence generationAnalytical estimation for temperature dependent transport properties of supercritical jet fuel surrogatHydro treated vegetable oil derived renewable diesel: A technical reviewAnalysis of ring stiffened cylindrical shells using functionally graded materialExperimental investigation on flow behavior and heat transfer characteristics of CUO based nanoparticA review on the friction stir welding of the sheets of dissimilar materialsCfd analysis on nano fluids turbulent convection heat transferMicrostructure characteristics &amp; mechanical properties of dissimilar tig weld between stainless steRegion of interest (roi)-based image compression for telemedicine applicationsMatlab simulation of hybrid motion estimation algorithm for H.2641AVCSmart energy meter for detecting fraudulent electricity connectionsAnalytical investigation on the influence of gravity on the structureof flame in the prediction of combImprovement of yagi uda antenna radiation patternVibration analysis of laminated composite plates using layerwise higher order shear deformation theorCFD analysis of supersonic nozzle for plasma wind tunnelExperimental investigations of tig and friction stir welding process for aa7075Development of fusion biometric system for atm machinesNull stress planes graphs through numerical simulations of a beam subjected to variable bending stressApplication of tree graphs in structural synthesis of planetary geartrainsExperimental study of replacement of coarse agrregates with aluminium capsAn effectiveness of human resource management in small and medium industries - An Telangana expeExperimental analysis of calophyllum inophyllum biodiesel blends on variable compression ratio dieselParametric analysis of cryogenic treatment on en31 material using edm processOptimization of taper ratio and pre twist angle for design of gas turbine blade with respect to the structA study on financial performance of amana investmentOverview of smart materials-Building blocks for sustainable futureEffect of cusn filler on tribological performance of glass fiber-epoxy compositeThermal performance improvement of flat plate solar collector using nano fluidsShear performance of saturated and unsaturated brick masonry at different mortar grades - An experiCase study and comparison of data for solid waste management in Allahabad, Varanasi and Kanpur distriFeasibility study on nano cryogenic coolant to be used in futuristic high temperature superconducting Numerical and experimental investigation of submerged ARC welding on mild steelEffect of inlet temperature on reynolds number and nusselt number with mixed refrigerants for industriA study on the performance of an ejector expansion refrigeration (EERS) system using various refrigeDevelopment of chitin and chitosan from narmada riverside crab shellsExperimental investigation on the effect of different compositions on chill down time of evaporator wiExperimental investigation of convective heat transfer augmentation using zno-proplyene glycol nanoflFractals in 4-dimensions-A studyA review of methods used for kinematic modeling of a manipulatorExperimental investigation on spot welding of mild, cold rolled steel and galvanised iron sheetsCost optimization in new product development, aligned with development process and product strateA fast motion estimation algorithm based on hybrid quad tree structureLiquid nitrogen with metal oxide nanoparticles for cooling of microelectronic devicesA novel throughput and packet delay analysis of control scheme based on a markov chain model in dePressure drop and heat transfer analysis of high temperature superconducting (HTS) motorsHeat transfer enhancement in 25-2t shell and tube heat exchanger with wire coil and twisted tape turb

A review of cryoprocessing on cutting tool materialInvestigation on the stress concentration in metallic flat plates due to holes with different configuratioEffect of thickness of plasma sprayed ceramic coating on the heat flux variations of aluminium alloy pisFinite element structural analysis of connecting rod of aa7075-Tic composite using AnsysAn empirical study on the influence of personalized product recommendations of brands in ecommercDesign and analysis of plastics gear for heavy duty applications by fea methodProcess simulation of vacuum desalination systems for producing potable drinking water from saline sTensile and impact strength evaluations of fswed magnesium alloys: Influence of speed ratios (Ω/V)An empirical investigation about quality of work culture in logistics firms in ChennaiEffect of fuel additives in tamarind seed methyl ester biodiesel fueled diesel engineA review on human cervical fatigue measurement technologies and data analysis methodsAn overview of garments produced in the micro apparel manufacturing companiesSaturation and non-saturation throughput and packet delay analysis of IEEE 802.11 DCF for Ad-Hoc neEstimation of performance parameters in indian automotive manufacturing using mdl methodExhaust gas analysis and temperature effect of mahua oil blo-diesel on single cylinder diesel engineExperimental analysis of engine performance and combustion characteristics using dual biodiesel blenStudy on thermal performance of different heat transfer fluids used in absorber tubes of a CLFR powerFreeze lining in furnace a heat transfer model using finite deference method and mat labFinite element analysis of gas turbine rotorwith base excitationA review on solar air heater technologyInvestigation of incompressible flow past two circular cylinders of different diametersPerformance, emissions and combustion characteristics of a diesel engine fuelled with hybrid biodieselDynamic analysis of cantilever beamAn improved turbomachinery conditionmonitoring method using multivariate statistical analysisStreets as public spaces: A case study of Manek chowkExperimental study of the viscoelastic behavior of polypropylene reinforced with hemp fibersReinvigorating the parikrama circuit of an ancient heritage city: MathuraCfd simulations and validation through test data of a double pipe counter flow heat exchangerInvestigation of mechanical properties of duralumin sandwich hybrid composite using E-glass fiberEffect of Karanja oil as an IC engine fuel in combination with diesel in CI engine: An experimental investInverse kinematics solution of a five joint robot using recurrent neural network algorithmInteroperability issues in cad system with case studiesSteady state thermal analysis of heat sink with fins of different geometryEvaluation on use of industrial radiography for weld joints inspection in TanzaniaExperimental investigation of 4-stroke single cylinder diesel engine using alternative fuelsCloud security and compliance - A semantic approach in end to end securityDesign, optimization and thermal analysis of a compression ignition engine cylinder using nano materiaPerformance characterstics of biodiesel using rice bran oil on 4 stroke single cylinder diesel engineInvestigation and modeling on dynamic failure mode-I type crack transitions in pressure vessel geometPerformance characteristics of an industrial cross flow wind turbineComparison of the mechanical performance between (Agave Americana, ladies finger, hybrid) reinforcA comparative study of mental wellbeing of it professionals in public and private sectorForward looking colour image based ground targeting systemHuman capital challenges: An empirical researchNumerical analysis of hybrid carbon fiber composite specimen and validation of resultsAnalysis of epoxy nano clay composites compressive strength during salt spray testDouble wishbone suspension systemA review of various gear geometry modification methodologies

Reduction of distribution losses in smart grid infrastructure by an optimization techniqueSpectroscopic characterization of mechanically synthesized MoO<inf>3</inf>/TiO<inf>2</inf> composExperimental investigations on performance parameters and combustion characteristics of low heat rejeFailure analysis of lug support of flanged motorExperimental investigation on four stroke single cylinder diesel engine by using linseed oilNumerical investigation on heat transfer and fluid flow of shell-side for shell and tube heat exchangerEffect of mahua oil methyl ester with additive as an IC engine fuel in combination with diesel in CI engLinear modeling of switched reluctance motor based on matlab/simulink and srdas environmentDesign of a power autonomous solar powered lawn mowerAn empirical model for performance of single cylinder variable compression ratio diesel engine using jThe specific gravity of biodiesel and its blend with gasolineExperimental investigation and optimization of machine parameters for EDM using graphite electrodeParametric optimization of composite drive shaft using ansys workbench 14.0Mathematical analysis of solar water pumping system for low income group flatsOptimization of EDM process parameters on hybrid composite with one factor approachReview on low plasticity burnishing process: A potential for improving mechanical properties of materiaStudy of abrasive wear behavior of AA 6063/TIC<inf>P</inf> In-situ compositesEffect of inhibitive influence of aqueous extract of Fenugreek sprouts on the corrosion of aluminium Optimization of friction stir weld parameters using response surface method for hybrid non ferrous coScheduling of machines and automated guided vehicles in FMS using scatter search algorithmStudy of heat transfer through rotating rectangular ductDesign and implementation of virtual laboratory using labview and myDAQModeling and analysis of a CNC milling machine bed with nano material (Graphene)Study of heat transfer through rectangular duct in a gas turbineStudy of diesel fuel emissions in HCCI technologyInvestigation of mechanical properties of al 7075/B<inf>4</inf>C/GR hybrid metal matrix compositeExhaust gas heat recovery using airpreheater for CI engineModeling and analysis of hexagonal unit cell for the prediction of effective thermal conductivityEffect of pre-twist on free vibration characteristics of a cantilever beam with experimental validationComputational studies on aero-thermodynamic design and performance of centrifugal turbo-machinerDesign and coupled (Thermal and Mechanical) field analysis of ceramic coated petrol engine pistonEffect of rolling on hardness of aluminium metal matrix composites-an experimental studyComparisons of machining parameters in electro discharge machining of aluminum 6082 and hybrid NNumerical investigation of heat transfer and fluid flow in plate heat exchanger with different types of pDesign and analysis of vertical axis wind turbine bladeComparison of NACA 23024 aerofoil with and without vortex generators using CFDHardness and microstructure testing of friction stir welding T-joints of AL 64430 alloyRover wheelDesign and simulation of a meander-line antenna for CR applicationsDesign and analysis of hybrid vehicleExperimental investigation on friction stir welding process using ANFIS modelImplementation of automatic test equipment for line replaceable units of active phased array radarEconomic justification for implementation of 5S in MSMES: A case study on M/S. unnathi CNC TechnoloComparison of the mechanical performance between (glass, sisal, ladies finger, hemp)reinforced polyeEffect of some design and operation parameters on the performance of a water desalination unit usingHeat transfer enhancement of double pipe heat exchanger using twisted tape insertsInvestigation of mechanical properties of AL 7075/SIC/GR hybrid metal matrix compositesCharacteristics of magnetic fluid lubrication on the performance of a transversely rough hydrodynamic

Effect of rolling on microstructure of aluminium metal matrix composites with magnesium particulatesImpact test on motorcycle helmet for different angles using finete element analysisWater pumping system for inundated agricultural fieldsMulti-use floor cleaning machinePrediction of EDM process parameters for AISI 1020 steel using RSM, GRA and ANNDesign and analysis of light weighted chassisKinetic energy recovery system in bicycleDesign of LQR-PI and MPC controllers for pitch control of a ballbotFabrication and testing of automobile pollutants absorbersDesign and analysis of wheel RIM with spoke patterns using different materialsPreparation and properties of phenol-formaldehyde resin reinforced with recycled cellulose fiberExperimental study on synthesis and optical properties of ZNO-CUO nano particlesMulti response prediction of machining process parameters using artificial neural networkATE for active phased array radar-Mini reviewThermal analysis of shell and tube heat exchangerMulti criteria trajectory planning with nurbs curves for cooperative robotsOptimization of EDM parameters using RSM and grey relational analysis for aluminium titanium diboridAir conditioner using exhaust gas of automobilesExperimental investigation on heat transfer enhancement on plate heat exchanger using AL<inf>2</inVerification of axiprotocol using system verilogDesign and development of die casting die for rejection reductionModeling the toque control scheme of surface mounted permanent magnet synchronous motorDesign and analysis of a hydraulic Brake caliperScheduling of machines and automated guided vehicles in FMS using shuffled frog leap algorithmPerformance model formation for lean product design and developmentAnalysis of epoxy nano clay composites compressive strength during tropical exposure testExperimental study on performance and emission characteristics of transesterified Jatropha biodiesel Design and fabrication of vacuum assist wall climberMulti parameters optimization of edm using grey entropy methodA computational solution to the short C-D nozzle for rocket applicationsNumerical study of partially closed knife gate valve using rans and les approachesChanging landscape of talent managementSynthetic jet flow control for NACA 2412 aerofoilExperimental investigation of performance and emission parameters of CI engine using Karanja Oil MetExperimental investigations and weld characteristics analysis of single pass semi automatic TIG welding wEffect of inlet geometry in the quality of vortex formed using vortex flow channelAnalysis of gas turbine blade assembly to evaluate the performance of various nickel based alloysKaranja oil as an alternative fuel with air preheaterAnalysis of customer oriented product development with quality function deploymentDesign and implementation of smart automation systemEffect of nano titanium blended canola methyl ester on CI engine with varying injection pressuresAnalysis of the influence of the radial depth of cut on the stability of the parts: Case of peripheral milliSynthesis and characterization of aluminium-bamboo leaf ash metal matrix composite by stir casting tPrediction of shrinkage and warpage in injected thermoplastic compositesreinforced with hemp fibersDesign and analysis of electric three wheeler autoComputational analysis of propellant flow on the structure of the wall of A BI-propellant thrusterApplication of BPSO in flexible manufacturing system schedulingDesign and analysis of differential gear box in automobiles

On heat distribution of the ceramic coated aluminum radial fins. A FEA studyStructure and property relation of hybrid aluminium compositeThe impact of ambient temperature on performance of simple brayton cyclePerformance and emissions from 4-stroke agro engine fuelled with gasoholEvaluation of texture, microstructure and microhardness of commercially pure titanium (grade 1/BT 1-Static analysis of crane hooks with different cross sections - A comparative study using Ansys WorkbenInfluence of twin screw configuration on the dispersion quality of the high concentration colored-mastInvestigation of customer focussed steel plant product with quality function deploymentOptimization of facility design by using matlab programmeReduction of noise in ZF gearboxBig data security and privacy: A short reviewOptimization of electrical discharge machining parameters for machining of titanium grade 2 using deDual fuel mode operation and its emission characteristics in diesel engine with producer gas as primary Investigation on the effect of moisture content and temperature on specific heat of Cucumis Melo (MAnalysis of two stage solar vapour adsorption refrigeration systemEstimation of flame temperature and droplet combustion characteristics of hydrocarbon fuels for sprayInfluence of different blends of ethanol on the performance of 4 - Stroke S.I. EngineOptimization of machining parameters in friction drilling processThe failure investigation of fuel storage tanks weld joints in TanzaniaOptimization of glass fibre reinforced polymeric composite material using end mill by taguchi design oDesign and simulation of MEMS based accelerometer for crash detection and air bags deployment in Dynamic vibration analysis of ti-alloy gas turbine blade rotating at high speed after grind-out repair ofGreener, safer - Sustainable energy efficient shipping using solar power optimizer by MPPTDempster-Shafer evidence theory for automated bearing fault diagnosisOptimizing turning process for en 42 by taguchi method under various machining parametersDesign and fabrication of drill jig for the component "AILERON LEVER FRAME 6 UPPER" for "HAWK MK-Preparation and properties of alpha naphthol-formaldehyde resin with nano-hydroxy apatiteDesign and optimization of a formula student wishbone bearing housingSVPWM using SiC, GaN power driven motors for sea water cooling system &amp; ballast water managNon-contact acceleration measurement in orthogonal directionsFabrication and characterization of aluminum titanium di-boride metal matrix composites using stir caDesign and analysis of composite leaf spring for military jeepReview on various solar tracking systemsPart load characteristics of a DI diesel engine achieving HCCI mode of combustion with air preheatingA review on current trends in water in oil emulsionsMetallurgical investigations of pulsed Nd: YAG laser welding on austenite steel sheets- SS316Development of an expert system for condition monitoring of submarines using IR thermographySpecial heuristics for flowshop scheduling based on hybrid genetic algorithm under SDST environmentDirect relationships to calculate properties of sunflower biodiesel and diesel blendsAnalysis of stress corrosion cracking of X65 oil pipelineEvaluation of heat transfer coefficient of a shrouded vertical array of heat sinks (fins): A computationaProduction of biodiesel and property evaluation from waste coconut oil and performance, emission andMultiple performance optimization of electric discharge drilling of inconel X750 using taguchi based grePerformance characteristics of solar thermal flat plate collector with different selective surface coatinStructural analysis of CALOWI manupilatorEvaluation of optimum process parameters in drilling process of hybrid composites using taguchi methAcoustically driven refrigeration device: A reviewAnalysis of stresses and deflections in spur gear

Design of chassis of two-wheeled electrical vehicle by optimization of design parameters using taguchEnhancement of fuel consumption and efficiency of the vehiclesNumerical simulation of centrifugal casting for functionally graded metal-matrix compositesDesign and finite element analysis of air borne radomeEconomical 3D - Printer by adopting FDM techniqueDesign and analysis of gate valve body and seat ringThe effects of arc welding hazards to welders and people surrounding the welding areaDesign considerations of Radomes: A reviewCFD analysis of aerodynamic design of Maruti Alto carAnalytical tool for analysing slagging characteristic of high ash coals in utility boilersThermoelectric fan and ice chest powered by candleA comparative study and analysis of the performance of various regenerative braking systemsDamage assessment in a wall structure using resonant frequencies and operating deflection shapesHydrodynamic squeeze film lubrication between rough parallel plates: Hip-joint representation with mMulti attribute decision making in selection of the most significant condition monitoring methodology Design and fabrication of material handling robot for multi stationComparative emission analysis of CNG and octane in retrofitted car enginesConnect among employee engagement and three key of organisational commitment level - An empiricaConstructive training implementation methodologies for corporate employeesDesign and control of ATC for shorter time interval in CNC machinesStudies on titanium nitride reinforced aluminium metal matrix compositesElimination of oil leak complaints in RH cover parts assemblyStrength of concrete by replacement of coarse aggregates with waste rubber and demolished waste maThermal analysis of silencer pipeOptimization of pedaling power through non-circular chain ring: A systematic reviewInvestigation on uses of crab based chitin and its derivativesAutomation of lathe using pneumatic actuatorsReview on one manned aircraftDivulging the teachers job satisfaction effect on better work performanceCFD analysis of aerodynamic design of Tata Indica carStatic analysis of a 6 - axis industrial robot using finite element analysisShear-thinning fluid flow in porous media: A study of boundary behaviour using lattice Boltzmann metPerformance of 3-D polar weave carbon-carbon composites in high thermal erosive environmentQuality control and safety during constructionDesign and experimental analysis of rack and pinion dynamo prototypeDesign and fabrication of automated 2-axis welding machineFurnace design of 210 MW circulating fluidized bed boiler-numerical investigationA review of production improvement through TPMExperimental investigation of effect of heat treatment on nose radius of insert and temperature at cuttiSurvey on implementing SAP in automotive component manufacturing industry in IndiaDesign and fabrication of electric bikeFluid flow analysis in air duct flow with and without internal threads using Computational Fluid DynamiTap water effect on some of mechanical properties of aluminum alloysCombustion monitoring through vibrational data in a turbocharged city car engineAn experimental study on the automotive production line using assembly line balancing techniquesMechanical properties of nanoiron particles reinforced epoxy/polyester nanocompositesExperimental optimization of drilling process parameters on die steel (H13) using carbide coated drillComparison of response to unbalance of overhung rotor system for different supports

Experimental study on the mechanical properties of hybrid aluminium metal matrix composite and optiPLC based automatic control for onboard ship gangway conveyor systemElimination of rejection in injector manufacturing process by using hydraulic fixtureEffect of die design on mechanical properties of hot pressed 6063 alloyDesign and development of special purpose machine using hydropneumatic cylinders to do 4 holes and Structural analysis of exhaust manifold for 1500 hp engineEffect of surface roughness on characteristics of squeeze film between porous rectangular platesDFA model through assembly contact data and geometrical feasibility testingSimulation of soil temperature variation for geothermal applicationsMHD Casson fluid flow and heat transfer with PST and PHF heating conditions due to a stretching sheeExperimental study on wear behaviour of SiC filled hybrid composites using taguchi methodEstimation and analysis of cycle efficiency for shell and tube heat exchanger by genetic algorithmComputational fluid dynamic analysis of airfoil NACA0015Computational analysis of stepped and straight microchannel heat sinkExperimental investigation and design optimization of end milling process parameters on Monel 400 Manufacturing lead time reduction in a scaffold making industry using lean manufacturing techniques -A review on zero emissions vehiclesA review: Carbon Capture and Sequestration (CCS) in IndiaClean coal technologies, challenges and future scopeStudies on extraction methods of chitin from crab shell and investigation of its mechanical propertiesFractography of cryogenic chill casted ASTM A 494 M grade nickel alloy metal matrix compositesThermal performance and economics analysis of double flow packed bed solar air heaterDesign of Cartesian type automated glass cleaning system for skyscraper'sSliding wear of AA6061/carbon black metal matrix compositesInvestigation on wear resistance behavior of SiC filled hybrid compositesPattern of road traffic accident: A case study of Hamirpur district in Himachal Pradesh (H.P)Bladeless turbine - A reviewExperimental study on damping properties of Sisal/Flax fibre reinforced composite materialSimulation and analysis prosthetic legThermal analysis of shell and tube type heat exchanger to demonstrate the heat transfer capabilities oCharacterization of banana fiber/Pistacia Vera shell cellulose reinforced compositesManufacturing and force determination of composite disc brakeSimulation of solar thermal central receiver power plant and effect of weather conditions on thermal Multiphase simulation of automotive HVAC evaporator using R134a and R1234yf refrigerantsPerformance study of a solar still with salt hydrate as energy storage mediumForward kinematic analysis of a robotic manipulator with triangular prism structured linksAnalysis of process parameters in milling of glass fibre reinforced plastic compositesEnhancement in mechanical properties of vibratory welded joints: An overviewNumerical solutions for performance prediction of centrifugal compressorEvaluation of processes parameter and mechanical properties in friction stir welded steelsDesign and optimization of submersible pump impellerAutomation of main bearing bolt and cap loosening machine for automobile crankshaftPerformance study of solar still integrated with solar pondMathematical modeling of drying kinetics of corn in electron fired fluidized bed dryerPotential exploitation of broadcasting system using multiple smart directional antennas -help of sensoSystematic study of head loss in pipes conveying oil in a process plantComparative analysis of performance of c.i. engine fuelled with different blends of biodiesel derived fStress analysis of external fixator based on stainless steel and composite material

Prediction of performance of gas turbine operating on air using 3D CFDLife cycle costing in engineering asset management: A study in the steel fabrication industryMeasuring the development of workers after effective training in automobile manufacturing companiesModelling and simulation of the thermal performance of a passive roofDesign and analysis of steering components for a race carExperimental study and optimizing erosive wear rate parameters using a novel entropy vikor approach A study on machinability characteristic in end milling of magnesium compositeModelling and analysis of alloy matrix material as considered for rocket bodyInvestigation on edible de-oiled and non edible de-oiled cakes in anaerobic co-digestion for biogas proModern vehicle for the physically challenged people using blue eye technologyEvidence-based &amp; practical diabetology - Enthusiastic independent CME in Jena [Evidenzbasierte Studies on performance of solar powered vapour absorption refrigerationPerformance analysis of CI engine using biodiesel from Pongamia pinnataVirtual reality for metal arc welding: A review and design conceptCFD analysis of pulsating heat pipe using different fluidsA survey on applications and security issues of internet of things (iot)Study of mechanical properties and wear behaviour of sugarcane ash reinforced aluminium compositeExperimental performance analysis on flat bed solar collector with and without microchannel finsAerodynamic analysis of morphing blade for horizontal axis wind turbineModelling and structural analysis of a go-kart vehicle chassis frameInfluence of shot peening on fatigue behavior of aluminum silicon carbide graphite hybrid compositeTo dialogue with chatbot using machine learningClogging of oil filters, oil jets, its consequences and a requirement of a pressure relief valve (prv) in oil fDesign and manufacturing electrical bottle car jack d.c. 12 voltA study on the factors influencing the occupational stress of indian seafarersClerkship in family medicine: Family practitioners' perception of learning contents: Results of a surveA structural equation modelling approach on tourism mega event of total solar eclipse and customer vaLet's Face the problem: We doctors do too much [Der Tatsache ins Auge sehen: Wir Ärzte tun zu viel]Customized spring and damper of an ATVSuspension system for an all terrain vehicleConceptual design of flying vehicleDesign and analys of knuckle streering using finite element analysisMultiple response characteristics optimization of wedm parameters for aa7075 composites by response Design and analysis of coconut fiber reinforced polyester composite leafspringThe influence of alternate fuels on the emission levels reduction and performance improvement of ci Performance analysis of gas turbine at varying ambient temperatureShear strength enhancement in vibratory lap welded jointsEffect of applied axial force on FSW of AA 6082 - T6 aluminium alloysSurface morphological studies of metallized plastics rapid prototypesVibration damping characteristics of cantilever beam using piezoelectric actuatorAnalysis of composite leaf spring: A comparisonImpact of the best human resource management on small scale industries towards motivation of emplInfluence of vibratory weld conditioning on hardness of lap welded jointsA review on signal processing techniques for bearing diagnosticsModeling and analysis of a composite wing for missile structureInvestigation on wear behaviour of lm13/sic aluminium metal matrix composites by response surfaceThe implications of democratization towards deformalization of islamic law in Indonesia: Study on abStatistics based acceptance criteria for vibration analysis and maintenance decision making on gearbox

Environmental study on gfrp composite laminatesFabrication and investigation of tensile and bending-mechanical and oxidative biodegradation propertieAnalysis of sand mold using industrial powders and fly ashNumerical simulation to investigate effect of downstream grooves on film cooling effectiveness of gas Update of the national disease management guideline for low back pain [Update der Nationalen VersorEditorial: An App a day keeps the doctor away?A low cost, home care smart stethoscope for diagnosis of respiratory diseases and heart rate measureProcess optimization in dry turning of steel, cast iron and bakelite using low cost tool materialSolar energy based smart room using double boost converterEffect of tool pin profile and optimization of process parameters on a6061 by friction stir welding usiProblem-solving treatment in primary care - An evidence-based method for everyday healthcare [ProbElectroconvulsive treatment in therapy-resistant or acute life-Threatening psychiatric disease [ElektrOptimization of a single cylinder, 4-stroke diesel engine performance parameters using diesel/cotton Design and manufacturing of cross-flow turbine to power coffee processing plant &amp; nearby communDesign and analysis of windmill blades for domestic applicationsExperimental and analytical validation of banana and americana hybrid compositeWear behaviour of am60 magnesium alloy with different load and sliding distanceDEGAM Benefits: No prophylactice antibiotic treatment of children with respiratory infections [DEGABraking system for an all terrain vehicleA study on the musculoskeletal discomfort in foundry workersHosting servers in cloud by using current cloud computing platform and servicesThe impact of participative budgeting on budgetary slack: A meta-analysisThe acousto -ultrasonic technique: A reviewDesign and thermal analysis of stirling engine using industrial applications of ceramic materialEvolution of supply chain management with emerging technologiesPerformance and emission analysis of ci engine fuelled with the blends of palm methyl esters and dieseDetection of defects in fabrics based on entropy and gauss-markov random fieldAn epq model for deteriorating items with mix demand patternStudies on friction stir welding of aluminium alloys 6061- to- 6061 similar metalsFriction stir welding of dissimilar al6061-t6 and pure copperTransmission system for all-terrain vehicleDesign and analysis of naca4420 wind turbine aerofoil using cfdBarriers to lean implementation in small and Medium-Sized Indian enterprisesA theoretical model of deep groove ball bearing for predicting the effect of localized defects on vibratiIntelligent production scheduling a case study2d cfd analysis of deflagration to detonation transition in closed pipe using different blockageOptimization of process parameters using AHP and VIKOR when turning AISI 1040 steel with coated tooEffectiveness of nano layers on interlaminar streeses of composite laminateDesign and analysis of composite leaf springStress analysis and optimization of engine mountFinite element modeling and analysis of hip joint prosthesis with modular stemQuality research publications -a key differentiator in India rankings 2017Effects of diethyl ether on performance and emission characteristics of a diesel engine using toroidal prDesign and fabrication of multi functional pedal operated machineEmpirical assessment and modeling of MRR and surface roughness acquired from wire electrical dischaPassengers ergonomics evaluation of locally modified intercity buses Addis Ababa, EthiopiaManufacturing of steering components for a race carEffect of welding parameters on mechanical properties of friction stir welded joints of aa6082 and aa6

Experimental and computational evaluation of emissions of an engine with a re-entrant piston bowl -a Design of exhaust silencer muffler for transmission losses with the performance of a four stroke dieselFabrication and computational analysis of cenosphere reinforced aluminum metal matrix composite diBehavior to damage of two hardening precipitation copper alloys: Experimental characterization and nStructured pharmacotherapy in multimorbid seniors -A pilot project [Strukturierte ArzneimitteltherapiDesign and control of multilevel inverter topologies for industrial applicationsDevelopment of an open type cnc system for a 3-axis micro cnc machineA case study on design of mechanical ploughing cycleThermal performance investigation of a finned absorber plate solar air heaterEnhancing the machining performance of HSS drill in the drilling of gfrp composite by reducing toolNumerical investigation of counter flow isosceles right triangular microchannel heat exchangerDevelopment of polymer matrix composites reinforcing with Al<inf>2</inf>CuMgExperimental investigation of radiator performance using tio2 nanofluidEmpirical mode decomposition: A review on mode selection method for rotating machinery diagnosisDesign and fabrication of natural ramie/epoxy composite bicycle frame with experimental and fea-abaqEffect of a tip clearance on the performance of a low speed centrifugal compressorStress distribution analysis of intact and implant model of humerusMicrostructural studies of magnesium ze41 rare earth alloy using semHigh stability opto mechanical mirror mounts for unstable resonatorResponse surface methodology to evaluate material removal rate in electric discharge machining of inAn automated mechanism for smart packaging line managementCharacterisation of mechanical properties of aluminium composites fabricated by stir-casting and powQuality assurance of structural aluminum aerospace materials through non destructive testing techniqHow do healthcare websites affect the physician-patient relationship?: Results of a user survey [Wie Design and development of advanced rotary peristaltic pumpAerodynamics and stability of spacecraft during earth entryDry sliding wear behavior of Cr<inf>3</inf>C<inf>2</inf>-NiCr coated ti6al4v implant alloy through dStructural analysis of spur gear using ansys workbench 14.5Design and analysis of the effect of nozzle at the outlet of condenser on vapour compression refrigeraReducing the defect rate of final products through spc tools: A case study on ammunition cartridge proData mining approach for quality prediction and improvement of injection molding process through SDesign of fuzzy self-tuning lqr controller for bus active suspensionResolution for parameteric discrepancies in the flow of francis turbineDesign and analysis of large transportable vacuum insulated cryogenic vesselBiodiesel as an alternative fuel: A state of art reviewProduction and mechanical characterization of Al-7075-T6 and fly ash composite by stir casting hot dieExperimental analysis of noise and vibration reduction in windmill gear box for 5mw wind turbineData mining approach for quality prediction of injection molding process through statistica SVM, KNOptimization of process parameters using ahp and topsis when turning AISI 1040 steel with coated toolWireless automation and machine learning of a rolling-mill using arduino and androidReview of hybrid stack complete and partial techniques in 45nm technologyPerformance and emission characteristics of spark ignition engine fuelled with ethanol, methanol and iFinite element analysis of disc brake rotor using different materialsDispersion of air pollutant in the neighbourhood of a typical thermal power station under critical windDesign and model analysis of rear axle with two ends spur geared using feaElectrochemical corrosion properties for different zones of AA 6061-T6 GTAW weldmentsSpeed reduction during mechanical power transmission between parallel shafts with an effective controBehavior of tensile, flexural and interlaminar shear strength of microfilled aluminium-glass fiber reinfo

Bonding strength of inconel 718 alloy deposit and substrate processed by laser metal depositionAnalysis of a bubble pump driven absorption refrigeration system (Einstein-Szilard refrigerator variant)Transient analysis of smart composite laminate plates using higher order theoryStability of an incompressible, hyperelastic, transversely and isotropic tube subjected to finite torsion Performance of two -way nesting techniques for shallow water modelsPerformance study on asymmetric FLD using rubber coatingsEvaluation of carbon conversion efficiency of mixed biomass gasificationPoor technology initiation leads to poor technology innovation (case study of Tanzania)Design and manufacture of vetrical-axis wind turbine based on magnetic levitationVariable camber angle mechanism for formula vehiclesStructural analysis of spur gear using femHigh insulation thermal boxOptimization of machining parameters in turning of al6063t6 through design of experimentsAxial crushing analysis of circular tubes with graded corrugations using finite element methodHeat transfer of cu-water nano-fluid along inclined flat plate with radiation and particle sizeEffect of thermal radiation on forced convective flow over a porous moving plateMathematical modelling to predict the cold gas efficiency of rice husk in biomass gasifierStudies on the thermal performance of a solar air heaterRecent studies in Aluminium Metal Matrix Nano Composites (AMMNCs)-A reviewValuation of turbulence modelling on low speed centrifugal compressor using computational fluid dynDesign and structural analysis of liquified cryogenic tank under seismic and operating loadingDesign and fabrication of mechanical vibration exciterEvaluation of boiler efficiency of bio briquettes by indirect methodComparison of compression ignition engine performance fuelled by liquefied petroleum gas and dieselOptimization of process parameters using taguchi techniques when turning aisi 1040 steel with coated Application of value stream mapping in bhujia manufacturingSuspension based kinetic energy recovery systemOptimal dimensional synthesis of six-bar stephenson i mechanism for path generationImplementation of planned maintenance using tpm methodology for a bi-cycle manufacturing industryExperimental investigation of heat transfer enhancement by using Al<inf>2</inf>O<inf>3</inf>-water nMethods to improve mechanical properties of welded joints: View pointChest compression for cardiopulmonary resuscitation with a 3-PRR parallel manipulatorCombustion study and emission characteristics of blends of diesel and hythane for gas turbine enginesExperimental analysis of magnetorheological fluid (MRF) dampers under triangular excitationStudies on tribological properties of sic and fly ash reinforced glass fiber epoxy composites by taguchiA review on magnetic nanoparticlesInvestigation on mechanical properties of Al 7075-Al<inf>2</inf>O<inf>3</inf> metal matrix compositeA research paper on the comparison of weld strength of friction welding of different materials at two Material development for thermo mechanical strained structural applicationPerformance evaluation of rack type solar dryerMagnetic levitation vehicle-supporting gravitational and electromagnetic principles, theories for designEffect of moisture content and equivalence ratio on the gasification process for different biomass fuelDesign and analysis of gear-box using spur gear and eliminating the differential unitLiterature review on optimization of finishing operation in a ceramic materialOptimization and wear determination of rail wheel profile for Indian railway specificationsFuture of manufacturing technology rapid prototyping techniqueA critical review on solid lubricantsDesign and analysis of composite leaf spring

Pneumatically driven two wheeler- An exploration at design parameters and extra possible benefitsFabrication and mechanical characterization of glass/particulates reinforced polyester compositesWear properties of nano scale fillers on vinyl ester-glass fibre hybrid compositesDesign methodology for steering system of an ATVDesign and analysis of crane hook for load conditionsFlow forming: A review of research methodologies, prediction models and their applicationsEffect of welding current on welding speed and ultimate tensile strength (UTS) of mild steelFourier transform infrared spectrophotometry studies of jatropha biodiesel and its blends for engine Study, design and improvement of pumping system efficiency of hydraulic pneumatic reciprocating pDesign and assessment of multi layer leaf springA critical review on cryogenic machining of titanium alloy (TI-6AL-4V)A critical review on surface coatings for engineering materialsSteady mixed convection mhd boundary layer flow and heat transfer of casson fluid in presence of sucPrediction of roughness in hard turning of AISI 4140 steel through artificial neural network and regresUtilization of solar energy for enhancement efficiency of steam power plantWeight loss functions for tolerable wear rate of AA1100/BN metal matrix compositesSoftware defect prediction using improved support vector machine classifierStudy of properties of AL LM-25/SIC metal matrix composite fabricated by using stir casting methodAnalysis of multiphase fluid flow motion in sandstone modelsModification in design of cylinder head gasket for reduction in bore distortion and to achieve optimumAnalysis and assessment of dual brake circuitsStatic analysis of multi-leaf spring using ansys workbench 16.0Concepts and CFD analysis of De-Laval nozzleExperimental analysis of propagation of crack in brass cantilever beam under forced vibrationDefect analysis of hand wheel casting using computer aided casting simulation techniqueExperimental comparison of performance characteristics of a single cylinder diesel engine fueled with jComputer aided process planning for milling operationA review of green supply chain managementDesign and analysis of Spur gearInfluence of helix angle on the stability of parts during milling peripheralModelling and analysis of AlSiC HMMC using WEDM processThermal analysis of tube-fin cross flow heat exchangerDifferent generations of manufacturing processes: A critical reviewComparative study of different approaches to estimate SCF in pressure vessel openingTheoretical investigation on heat transfer and friction factor characteristics of cylindrical parabolic coFinite element analysis of autofrettage process of thick - Walled cylindersDesign and finite element analysis of MR Fluid damper for structural vibration mitigationDesign of high pressure radome with UWB frequency coverage for submarine communicationsStudy and optimization of the injection molding of composites based on short hemp fibersModeling the filling phase of injection process of technical parts with thermoplastics composites baseStudy and analysis of connecting ROD parameters using ANSYSDesign and fabrication of grinding wheel attachment on lathe machineMechanical properties of friction stir welding joints of similar &amp; disimilar aluminium alloys AA60Cooling techniques for photovoltaic module for improving its conversion efficiency: A reviewInvestigation of magnetorheological fluid (MRF) boring bar for chatter stabilitySimulation studies of impact of electrode geometry on thermal profiles in micro EDM by using CFX toolTrain wheel wear variability in terms of train set layoutStability enhancement of a powered two wheeler vehicle under curve negotiation

Performance study of solar still with separate condenserExperimental investigation to optimize parameters of reverse engineering technology for reconstructinDesign modelling and analysis of helical gear using CATIA, ANSYS and AGMA parametersEffect of heat treatment and natural agening on microstructure and mechanical properties of A356 rePreparation and characterization of magnetorheological fluid for damper in automobile suspensionModelling of crankshaft by cad tool and finite element analysis using ansys softwareDesign and analysis of a brake caliperStatic and dynamic analysis of spur gearFinite element analysis and optimization of tractor trolley AXLEAnalysis of straight microchannel heat sink using computational fluid dynamicsStudy of heat transfer in a corrugated plate heat exchanger using Al<inf>2</inf>O<inf>3</inf> microparTaking into account of the dynamic effects of the cut on the laying of the parts in peripheral millingDevelopment of pedal operated unit for agricultural useA critical review on agricultural robotsNumerical simulation of effect of return air vent on indoor thermal environmentOptimization of machining parameters on Al-Si (LM 6) alloy using taguchi method and utility conceptWear behaviour of welded and non-welded samples of friction stir welding of similar and dissimilarEffect of sensible energy storage medium on the productivity of solar stillStudy of thermorheological behavior of polypropylene composites reinforced with short hemp fibers durDetermination of heat transfer coefficient of brake rotor disc using CFD simulationStructural and vibrational response analysis of H.P. bladed disc assemblyEnhancement of heat transfer in shell and tube heat exchanger with tabulator and nanofluidOptimization of process parameters in direct metal deposition technique using Taguchi methodConcept of finite element modelling for trusses and beams using abaqusModeling and optimization of a mobile crop residue disintegratorFactors affecting best maintenance practice in Tanzania public sectorSix degrees of freedom integration deviceImprovement in process industries by using work study methods: A case studySaving energy by using insulationInvestigation on mechanical properties of Hemp-e glass fiber reinforced polymer compositesThe variation in physical properties affects the vertical compressive strength of the Rudraksha-bead (eEffect of hand arm vibration exposure in manufacturing industryUnmanned surface vehicle (USV) for coastal surveillanceFactors related to human resources affecting the maintenance effectiveness in Tanzanian industriesStudies on finned basin solar stillEffect of (AL<inf>2</inf>O<inf>3</inf>) nanofluid on heat transfer characteristics for circular finned tMechanical behaviour of damaged central core strand constituting a steel wire rope hoist under the effeExperimental and theortical study of the thermal performance of heat pipe heat exchangerDesign and development of a transmission system for an all terrain vehicleAnalysis of friction induced vibration during engagement of clutchesPerformance evaluation of two stage air cooler in different speed3D printing technologies in various applicationsMicrostructural characterization and hot erosion behavior of CrC-NiCr coated steel using HVOF techniProcess flow and analysis of CCS plant installed at RGPV Bhopal run by Biomass gasifierPerformance and emission analysis of porous media combustion chamber in diesel engines for differentMulti response optimisation of die sinker EDM for AlSiC compositeStudy of performance evaluation of domestic refrigerator working with mixture of propane, butane andExperimental and numerical investigation of temperature distribution for meat during freezing process

Comparative study of the effect of dwelling the punch at the BDC vs without dwelling at the BDC on thHeat transfer augmentation of laminar nanofluid flow in horizontal tube inserted with twisted tapesPotential analysis of power generation by non woody biomass and coal biomass mixed briquettesFormulation of a field data based model to estimate the noise level in a diesel generator set with acousNumerical investigation of an unsteady mixed convective mass and heat transfer MHD flow with Soret efFailure analysis of gas turbine blade using finite element analysisPneumatically driven vehicle with rechargeable battery during drive-an exploratory step in addressingModern rapid 3D printer - A design reviewThermal conductivity analysis in various materials using composite wall apparatusConsistent and lumped mass matrices in dynamics and their impact on finite element analysis resultsDesign of fixed dome domestic bio digester for degradation of kitchen waste using mesophilic &amp; tParameter optimization in vertical machining center CNC for EN45 (steel alloy) using response surfacForce calculation in upright of a FSAE race carMechanical properties and SEM analysis of glass/nylon/jute reinforced epoxy hybrid compositesHeat treatment effect on mechanical properties and sem analysis of Al6061/Wc/B<inf>4</inf>C/Ti/Cr Mechanically operated wheelchair convertible stretcherTheoretical and experimental studies on stepped solar stillFriction stir welding of aluminium alloys - A reviewOptimizations of machining parameter in wire EDM for 316L stainless steel by using Taguchi method, Transient analysis of impact loads on bumper beam at different offsetsAir powered engineExperimental investigation of PCM using response surface methodology on SS316L steelAutomotive computational fluid dynamics simulation of a car using ansysExperiment on multi blend biodiesel using jatropha and pongamia biodiesel on single cylinder diesel engTotal effective energy management: The must need for Indian industryComparative analysis of the processes for machining of mold element with using TopSolid'CAM and espDetailed studies on stress concentration by classical and finite element analysisUse of vibration energy for charging electric carStudy of process parameters of gravity die casting defectsTheoretical study on pipe of tapered thickness with an internal flow to estimate natural frequencyPerformance and emission characteristics of biogas-petrol dual fuel in SI engineOscillatory flow of MHD polar fluid with heat and mass transfer past a vertical moving porous plate witAdvanced tool for fluid dynamics-CFD and its applications in automotive, aerodynamics and machine iElastic modulii and their relationship by considering any arbitrary angleSelf powered pesto-sprayerForecasting of passengers demand - A case studyFluid flow analysis of centrifugal fan by using femLow expense vertical axis wind turbine using permanent magnetsFoot step power generationDesign and analysis of axial crossing of work rolls in rolling mill work roll assembly: A reviewEffect of (MGO) nanofluid on heat transfer characteristics for integral finned tube heat exchangerScope for design &amp; development of 2R edge trimming mechanism &amp; tool adjustmentAnalytical and experimental evaluation of spring back effects in a typical cold rolled sheetExpermentational data analysis of chimney operated solar power plantHeat transfer augmentation in a plate-fin heat exchanger: A reviewPerformance evaluation of a solar still coupled to an evacuated tube collector type solar water heaterCylinder deactivation on two different cubic capacity engineEffect of injection pressure on performance parameters and combustion characteristics of high grade se

Structural and thermal analysis of disc brake using solidworks and ansysWaste plastic fuel used in petrol engineProduction of domestic hot water with solar thermal collectors in north-european apartment buildingsDevelopment of multi cylinder crd-i engine to meet euro VI emission normsStudy of heat transfer on broken arc roughness elements on the absorber plate for solar energy based Dynamical analysis of silo surface cleaning robot using finite element methodThe "pseudo single row" radiator designProperties of aluminium mesh reinforced polyestercompositesComparison of main effect of vegetable oil and Al<inf>2</inf>O<inf>3</inf> nanofluids used with mqlExperimental investigations on performance parameters of high grade semi adiabatic diesel engine witNumerical simulation of forced convection in oil sands using lattice boltzmann methodInvestigation of mechanical properties of polyester reinforced with hemp fibre (long fibres and mat) forApplication of dual response and tolerance analysis approaches for robust design of spot welding procParametric optimisation of generated waste plastic fuel parameters with the help of taguchi methodDevelopment and testing of advance hybrid savonius and arm gear based structure for electric power An integrated approach for the improvement of dynamic characteristics of ventilation fan of a tractionFree convection from optimum sinusoidal surface exposed to vertical vibrations

Year Source titl Volume Issue Art. No. Page start Page end Page countCited by DOI2017 Internatio 8 7 1299 13102017 Internatio 8 7 334 3442017 Internatio 8 7 881 8882017 Internatio 8 7 717 7232017 Internatio 8 7 1225 12302017 Internatio 8 7 742 7492017 Internatio 8 7 1900 19052017 Internatio 8 7 11 162017 Internatio 8 7 1906 19152017 Internatio 8 7 1652 16612017 Internatio 8 7 1208 12172017 Internatio 8 7 784 7942017 Internatio 8 7 240 2462017 Internatio 8 7 1383 13952017 Internatio 8 7 213 2242017 Internatio 8 7 768 7762017 Internatio 8 7 1872 18802017 Internatio 8 7 1246 12512017 Internatio 8 7 897 9082017 Internatio 8 7 190 1982017 Internatio 8 7 1669 16752017 Internatio 8 7 952 9582017 Internatio 8 7 388 3962017 Internatio 8 7 1180 11882017 Internatio 8 7 181 1892017 Internatio 8 7 1446 14562017 Internatio 8 7 1837 18432017 Internatio 8 7 397 4042017 Internatio 8 7 1081 10932017 Internatio 8 7 915 9242017 Internatio 8 7 358 3662017 Internatio 8 7 405 4132017 Internatio 8 7 1357 13612017 Internatio 8 7 474 4822017 Internatio 8 7 1775 17842017 Internatio 8 7 1693 16982017 Internatio 8 7 1755 17622017 Internatio 8 7 1168 11792017 Internatio 8 7 1311 13192017 Internatio 8 7 267 2742017 Internatio 8 7 834 8452017 Internatio 8 7 933 9512017 Internatio 8 7 592 6032017 Internatio 8 7 1159 11672017 Internatio 8 7 1034 10512017 Internatio 8 7 795 8042017 Internatio 8 7 925 932

2017 Internatio 8 7 1272 12832017 Internatio 8 7 1465 14732017 Internatio 8 7 1676 16832017 Internatio 8 7 1532 15392017 Internatio 8 7 283 2892017 Internatio 8 7 1144 11582017 Internatio 8 7 703 7162017 Internatio 8 7 1710 17172017 Internatio 8 7 37 432017 Internatio 8 7 462 4732017 Internatio 8 7 969 9752017 Internatio 8 7 516 5232017 Internatio 8 7 53 602017 Internatio 8 7 662 6752017 Internatio 8 7 1260 12712017 Internatio 8 7 70 842017 Internatio 8 7 199 2122017 Internatio 8 7 1684 16922017 Internatio 8 7 1607 16142017 Internatio 8 7 1662 16682017 Internatio 8 7 379 3872017 Internatio 8 7 1348 13562017 Internatio 8 7 1573 15822017 Internatio 8 7 428 4382017 Internatio 8 7 1516 15232017 Internatio 8 7 352 3572017 Internatio 8 7 1492 14992017 Internatio 8 7 1370 13752017 Internatio 8 7 1814 18222017 Internatio 8 7 1638 16512017 Internatio 8 7 1423 14292017 Internatio 8 7 1540 15452017 Internatio 8 7 25 362017 Internatio 8 7 909 9142017 Internatio 8 7 157 1652017 Internatio 8 7 1763 17742017 Internatio 8 7 1726 17312017 Internatio 8 7 685 6912017 Internatio 8 7 1830 18362017 Internatio 8 7 559 565 12017 Internatio 8 7 1430 14392017 Internatio 8 7 1052 10592017 Internatio 8 7 247 2552017 Internatio 8 7 172 1802017 Internatio 8 7 805 8212017 Internatio 8 7 759 7672017 Internatio 8 7 1338 13472017 Internatio 8 7 1238 1245

2017 Internatio 8 7 275 2822017 Internatio 8 7 1793 17992017 Internatio 8 7 439 4482017 Internatio 8 7 455 4612017 Internatio 8 7 860 8682017 Internatio 8 7 1231 12372017 Internatio 8 7 550 5582017 Internatio 8 7 1699 17092017 Internatio 8 7 112 124 12017 Internatio 8 7 92 982017 Internatio 8 7 1118 11212017 Internatio 8 7 1583 15892017 Internatio 8 7 1094 11012017 Internatio 8 7 1396 14032017 Internatio 8 7 822 8332017 Internatio 8 7 1785 17922017 Internatio 8 7 125 1322017 Internatio 8 7 44 522017 Internatio 8 7 345 3512017 Internatio 8 7 85 912017 Internatio 8 7 985 9912017 Internatio 8 7 524 5362017 Internatio 8 7 328 3332017 Internatio 8 7 1806 18132017 Internatio 8 7 656 6612017 Internatio 8 7 1073 10802017 Internatio 8 7 1599 16062017 Internatio 8 7 498 5092017 Internatio 8 7 613 6262017 Internatio 8 7 777 7832017 Internatio 8 7 1748 17542017 Internatio 8 7 166 1712017 Internatio 8 7 1546 15552017 Internatio 8 7 1800 18052017 Internatio 8 7 1218 12242017 Internatio 8 7 1892 18992017 Internatio 8 7 750 7582017 Internatio 8 7 724 7302017 Internatio 8 7 308 3182017 Internatio 8 7 1376 13822017 Internatio 8 7 537 5492017 Internatio 8 7 490 4972017 Internatio 8 7 319 3272017 Internatio 8 7 231 2392017 Internatio 8 7 889 8962017 Internatio 8 7 1732 17382017 Internatio 8 7 1320 13372017 Internatio 8 7 1111 1117

2017 Internatio 8 7 1485 14912017 Internatio 8 7 869 8802017 Internatio 8 7 449 4542017 Internatio 8 7 1292 12982017 Internatio 8 7 17 242017 Internatio 8 7 145 1562017 Internatio 8 7 1500 15072017 Internatio 8 7 1457 14642017 Internatio 8 7 483 4892017 Internatio 8 7 1739 17472017 Internatio 8 7 133 1392017 Internatio 8 7 1 102017 Internatio 8 7 99 1052017 Internatio 8 7 1189 11982017 Internatio 8 7 636 6412017 Internatio 8 7 414 4272017 Internatio 8 7 1068 10722017 Internatio 8 7 290 297 12017 Internatio 8 7 649 6552017 Internatio 8 7 256 2662017 Internatio 8 7 1252 12592017 Internatio 8 7 1440 14452017 Internatio 8 7 1010 10172017 Internatio 8 7 225 230 12017 Internatio 8 7 1615 16262017 Internatio 8 7 1018 10332017 Internatio 8 7 976 9842017 Internatio 8 7 676 6842017 Internatio 8 7 367 3782017 Internatio 8 7 627 6352017 Internatio 8 7 1411 14162017 Internatio 8 7 1060 10672017 Internatio 8 7 1590 15982017 Internatio 8 7 1844 18532017 Internatio 8 7 1567 15722017 Internatio 8 7 992 10002017 Internatio 8 7 298 3072017 Internatio 8 7 1556 15662017 Internatio 8 7 1132 11432017 Internatio 8 7 61 692017 Internatio 8 7 1854 18612017 Internatio 8 7 574 5802017 Internatio 8 7 692 7022017 Internatio 8 7 642 6482017 Internatio 8 7 1284 12912017 Internatio 8 7 604 6122017 Internatio 8 7 1862 18712017 Internatio 8 7 846 859

2017 Internatio 8 7 1627 16372017 Internatio 8 7 1718 17252017 Internatio 8 7 1199 12072017 Internatio 8 7 1102 11102017 Internatio 8 7 731 7412017 Internatio 8 7 106 1112017 Internatio 8 7 1881 18912017 Internatio 8 7 1524 15312017 Internatio 8 7 1001 10102017 Internatio 8 7 959 9682017 Internatio 8 7 1474 14842017 Internatio 8 7 510 5152017 Internatio 8 7 566 5732017 Internatio 8 7 1823 18292017 Internatio 8 7 140 1442017 Internatio 8 7 1404 14102017 Internatio 8 7 1417 14222017 Internatio 8 7 581 5912017 Internatio 8 7 1362 13692017 Internatio 8 7 1122 11312017 Internatio 8 7 1508 15152017 Internatio 8 6 501 5092017 Internatio 8 5 1167 11732017 Internatio 8 5 1147 11592017 Internatio 8 5 1367 13762017 Internatio 8 5 1160 11662017 Internatio 8 5 1353 1359 12017 Internatio 8 5 818 8312017 Internatio 8 5 425 4312017 Internatio 8 5 1 9 22017 Internatio 8 5 941 9582017 Internatio 8 5 778 7832017 Internatio 8 5 196 2062017 Internatio 8 5 65 742017 Internatio 8 5 409 419 12017 Internatio 8 5 987 994 12017 Internatio 8 5 124 1342017 Internatio 8 5 146 1542017 Internatio 8 5 896 9112017 Internatio 8 5 1071 10832017 Internatio 8 5 167 1742017 Internatio 8 5 1034 10442017 Internatio 8 5 1045 10502017 Internatio 8 5 755 7612017 Internatio 8 5 75 882017 Internatio 8 5 1105 1109 22017 Internatio 8 5 249 264 12017 Internatio 8 5 53 58 1

2017 Internatio 8 5 857 8652017 Internatio 8 5 1051 1063 12017 Internatio 8 5 694 7102017 Internatio 8 5 851 8562017 Internatio 8 5 380 3882017 Internatio 8 5 995 10092017 Internatio 8 5 1084 1091 62017 Internatio 8 5 832 8422017 Internatio 8 5 113 1232017 Internatio 8 5 767 777 22017 Internatio 8 5 207 2112017 Internatio 8 5 226 2362017 Internatio 8 5 10 23 22017 Internatio 8 5 811 8172017 Internatio 8 5 567 576 12017 Internatio 8 5 791 8102017 Internatio 8 5 42 522017 Internatio 8 5 638 6462017 Internatio 8 5 912 923 12017 Internatio 8 5 471 4812017 Internatio 8 5 212 2172017 Internatio 8 5 744 7482017 Internatio 8 5 372 379 12017 Internatio 8 5 490 4952017 Internatio 8 5 510 5142017 Internatio 8 5 400 4082017 Internatio 8 5 135 145 12017 Internatio 8 5 651 655 22017 Internatio 8 5 389 399 12017 Internatio 8 5 320 3332017 Internatio 8 5 155 1662017 Internatio 8 5 525 5302017 Internatio 8 5 784 790 12017 Internatio 8 5 621 6372017 Internatio 8 5 504 5092017 Internatio 8 5 556 566 22017 Internatio 8 5 334 343 22017 Internatio 8 5 1127 11362017 Internatio 8 5 749 7542017 Internatio 8 5 237 248 12017 Internatio 8 5 886 895 22017 Internatio 8 5 711 7212017 Internatio 8 5 306 3192017 Internatio 8 5 458 4702017 Internatio 8 5 681 693 22017 Internatio 8 5 420 4242017 Internatio 8 5 265 2692017 Internatio 8 5 1110 1118 2

2017 Internatio 8 5 583 587 12017 Internatio 8 5 280 2932017 Internatio 8 5 482 4892017 Internatio 8 5 656 6642017 Internatio 8 5 924 940 12017 Internatio 8 5 96 103 32017 Internatio 8 5 104 112 32017 Internatio 8 5 877 8852017 Internatio 8 5 300 3052017 Internatio 8 5 538 5412017 Internatio 8 5 59 642017 Internatio 8 5 294 2992017 Internatio 8 5 866 8762017 Internatio 8 5 722 7292017 Internatio 8 5 596 6062017 Internatio 8 5 959 9732017 Internatio 8 5 1022 10332017 Internatio 8 5 1119 11262017 Internatio 8 5 357 3642017 Internatio 8 5 588 5952017 Internatio 8 5 1061 1070 12017 Internatio 8 5 1137 11462017 Internatio 8 5 33 412017 Internatio 8 5 496 5032017 Internatio 8 5 1092 1100 12017 Internatio 8 5 1101 1104 12017 Internatio 8 5 974 9862017 Internatio 8 5 365 3712017 Internatio 8 5 446 4572017 Internatio 8 5 531 5372017 Internatio 8 5 432 4452017 Internatio 8 5 762 7662017 Internatio 8 5 843 850 12017 Internatio 8 5 1010 1021 42017 Internatio 8 5 542 555 22017 Internatio 8 5 515 5242017 Internatio 8 5 665 673 32017 Internatio 8 5 218 2252017 Internatio 8 5 270 279 12017 Internatio 8 5 674 680 12017 Internatio 8 5 24 32 12017 Internatio 8 5 730 743 12017 Internatio 8 5 351 3562017 Internatio 8 5 577 5822017 Internatio 8 5 89 952017 Internatio 8 5 607 6202017 Internatio 8 5 186 1952017 Internatio 8 5 175 185

2017 Internatio 8 5 647 6502017 Internatio 8 5 344 3502017 Internatio 8 4 75 812017 Internatio 8 4 93 1012017 Internatio 8 4 398 407 12017 Internatio 8 4 474 4822017 Internatio 8 4 266 2762017 Internatio 8 4 19 25 22017 Internatio 8 4 112 1192017 Internatio 8 4 351 3582017 Internatio 8 4 408 412 12017 Internatio 8 4 413 423 12017 Internatio 8 4 138 147 42017 Internatio 8 4 448 4552017 Internatio 8 4 120 127 32017 Internatio 8 4 289 3082017 Internatio 8 4 102 1112017 Internatio 8 4 242 2542017 Internatio 8 4 128 1372017 Internatio 8 4 165 171 22017 Internatio 8 4 424 434 12017 Internatio 8 4 202 211 22017 Internatio 8 4 156 164 12017 Internatio 8 4 277 288 12017 Internatio 8 4 233 2412017 Internatio 8 4 372 3792017 Internatio 8 4 59 652017 Internatio 8 4 435 4412017 Internatio 8 4 1 12 12017 Internatio 8 4 82 922017 Internatio 8 4 13 18 22017 Internatio 8 4 47 58 22017 Internatio 8 4 178 1832017 Internatio 8 4 337 3502017 Internatio 8 4 359 371 12017 Internatio 8 4 388 3972017 Internatio 8 4 26 332017 Internatio 8 4 327 336 12017 Internatio 8 4 255 2652017 Internatio 8 4 212 222 22017 Internatio 8 4 319 326 42017 Internatio 8 4 184 1932017 Internatio 8 4 34 462017 Internatio 8 4 309 3182017 Internatio 8 4 380 3872017 Internatio 8 4 194 201 52017 Internatio 8 4 172 177 22017 Internatio 8 4 461 473 1

2017 Internatio 8 4 223 232 32017 Internatio 8 4 456 4602017 Internatio 8 4 66 742017 Internatio 8 4 148 1552017 Internatio 8 4 442 447 12017 Internatio 8 3 131 1412017 Internatio 8 3 433 441 12017 Internatio 8 3 42 48 12017 Internatio 8 3 388 399 22017 Internatio 8 3 185 1962017 Internatio 8 3 400 4082017 Internatio 8 3 66 76 32017 Internatio 8 3 97 1072017 Internatio 8 3 1 122017 Internatio 8 3 254 263 22017 Internatio 8 3 142 148 22017 Internatio 8 3 123 130 12017 Internatio 8 3 296 3032017 Internatio 8 3 89 96 12017 Internatio 8 3 77 88 52017 Internatio 8 3 114 122 22017 Internatio 8 3 409 4182017 Internatio 8 3 304 3132017 Internatio 8 3 269 2782017 Internatio 8 3 373 378 12017 Internatio 8 3 456 466 12017 Internatio 8 3 419 425 12017 Internatio 8 3 264 268 12017 Internatio 8 3 279 2902017 Internatio 8 3 344 355 52017 Internatio 8 3 49 552017 Internatio 8 3 13 212017 Internatio 8 3 219 2282017 Internatio 8 3 108 113 12017 Internatio 8 3 291 295 12017 Internatio 8 3 236 244 12017 Internatio 8 3 442 455 12017 Internatio 8 3 314 3182017 Internatio 8 3 34 41 12017 Internatio 8 3 356 3642017 Internatio 8 3 245 253 22017 Internatio 8 3 168 1742017 Internatio 8 3 365 372 12017 Internatio 8 3 197 208 32017 Internatio 8 3 22 33 12017 Internatio 8 3 175 184 12017 Internatio 8 3 159 167 22017 Internatio 8 3 56 65

2017 Internatio 8 3 319 330 12017 Internatio 8 3 229 235 12017 Internatio 8 3 331 343 12017 Internatio 8 3 426 4322017 Internatio 8 3 209 2182017 Internatio 8 3 379 3872017 Internatio 8 3 149 1582017 Internatio 8 2 131 136 12017 Internatio 8 2 167 1752017 Internatio 8 2 16 262017 Internatio 8 2 271 277 52017 Internatio 8 2 93 101 22017 Internatio 8 2 210 219 22017 Internatio 8 2 256 262 32017 Internatio 8 2 113 1222017 Internatio 8 2 137 148 12017 Internatio 8 2 198 202 22017 Internatio 8 2 1 7 12017 Internatio 8 2 34 402017 Internatio 8 2 220 231 22017 Internatio 8 2 278 2882017 Internatio 8 2 176 182 42017 Internatio 8 2 107 1122017 Internatio 8 2 203 209 32017 Internatio 8 2 82 92 22017 Internatio 8 2 194 197 12017 Internatio 8 2 232 2362017 Internatio 8 2 70 812017 Internatio 8 2 102 1062017 Internatio 8 2 160 166 22017 Internatio 8 2 123 130 42017 Internatio 8 2 246 255 42017 Internatio 8 2 27 33 12017 Internatio 8 2 263 270 22017 Internatio 8 2 289 294 12017 Internatio 8 2 8 15 12017 Internatio 8 2 149 159 142017 Internatio 8 2 50 55 12017 Internatio 8 2 237 245 12017 Internatio 8 2 183 193 62017 Internatio 8 2 56 692017 Internatio 8 2 41 49 22017 Internatio 8 6 248 2542017 Internatio 8 6 51 582017 Internatio 8 6 678 6872017 Internatio 8 6 662 6662017 Internatio 8 6 714 721 12017 Internatio 8 1 189 199 2

2017 Internatio 8 1 256 263 12017 Internatio 8 6 348 3592017 Internatio 8 6 649 6612017 Internatio 8 6 510 5162017 Internatio 8 6 125 1292017 Internatio 8 6 27 43 12017 Internatio 8 6 455 462 12017 Internatio 8 1 45 53 12017 Internatio 8 1 249 255 22017 Internatio 8 1 208 2122017 Internatio 93 6 283 285 10.3238/zf2017 Internatio 8 1 100 109 12017 Internatio 8 1 281 291 72017 Internatio 8 1 132 1382017 Internatio 8 6 804 8122017 Internatio 8 6 641 648 42017 Internatio 8 6 597 606 12017 Internatio 8 6 740 749 12017 Internatio 8 1 37 44 42017 Internatio 8 6 305 3112017 Internatio 8 6 255 2632017 Internatio 8 6 729 7392017 Internatio 8 6 156 1662017 Internatio 8 6 200 2062017 Internatio 8 6 411 4172017 Internatio 93 6 271 277 10.3238/zf2017 Internatio 8 6 317 326 22017 Internatio 93 6 245 249 10.3238/zf2017 Internatio 8 1 146 1512017 Internatio 8 6 85 952017 Internatio 8 6 471 4792017 Internatio 8 6 264 2722017 Internatio 8 6 667 6772017 Internatio 8 6 544 5522017 Internatio 8 6 222 2472017 Internatio 8 1 240 280 12017 Internatio 8 1 160 168 12017 Internatio 8 1 88 99 12017 Internatio 8 6 368 3762017 Internatio 8 6 212 221 22017 Internatio 8 6 688 6942017 Internatio 8 6 435 446 22017 Internatio 8 1 169 177 12017 Internatio 8 6 327 3372017 Internatio 8 6 338 3472017 Internatio 8 6 530 5432017 Internatio 8 6 70 842017 Internatio 8 6 525 529

2017 Internatio 8 6 480 4932017 Internatio 8 1 1 14 12017 Internatio 8 1 292 303 42017 Internatio 8 1 304 316 32017 Internatio 93 6 250 254 10.3238/zf2017 Internatio 93 6 2412017 Internatio 8 6 167 1752017 Internatio 8 1 213 2342017 Internatio 8 6 10 152017 Internatio 8 6 615 6212017 Internatio 93 6 260 265 10.3238/zf2017 Internatio 93 6 255 259 10.3238/zf2017 Internatio 8 1 62 69 22017 Internatio 8 1 54 612017 Internatio 8 1 25 362017 Internatio 8 6 384 3922017 Internatio 8 6 130 134 12017 Internatio 93 6 2432017 Internatio 8 6 360 367 12017 Internatio 8 6 377 383 12017 Internatio 8 6 587 596 12017 Internatio 8 6 822 8302017 Internatio 8 6 418 4342017 Internatio 8 6 273 2822017 Internatio 8 1 235 240 22017 Internatio 8 6 704 713 22017 Internatio 8 6 770 7882017 Internatio 8 6 59 692017 Internatio 8 1 264 269 32017 Internatio 8 6 312 316 12017 Internatio 8 6 517 5242017 Internatio 8 6 403 4102017 Internatio 8 6 1 9 12017 Internatio 8 6 760 769 12017 Internatio 8 6 283 2982017 Internatio 8 6 447 4542017 Internatio 8 1 241 2482017 Internatio 8 1 15 242017 Internatio 8 6 494 500 12017 Internatio 8 6 148 1552017 Internatio 8 6 789 7952017 Internatio 8 6 117 1242017 Internatio 8 6 96 106 32017 Internatio 8 6 631 640 12017 Internatio 8 1 152 159 22017 Internatio 8 1 70 802017 Internatio 8 6 207 2112017 Internatio 8 6 564 574

2017 Internatio 8 6 393 4022017 Internatio 8 1 139 145 32017 Internatio 8 6 553 563 32017 Internatio 8 1 200 207 12017 Internatio 93 6 266 270 10.3238/zf2017 Internatio 8 6 107 1162017 Internatio 8 6 463 4702017 Internatio 8 6 750 7592017 Internatio 8 6 622 630 32017 Internatio 8 1 120 131 32017 Internatio 8 1 81 872017 Internatio 8 6 190 199 12017 Internatio 8 6 607 6142017 Internatio 8 6 16 262017 Internatio 8 6 575 586 12017 Internatio 8 1 178 188 42017 Internatio 8 6 44 50 12017 Internatio 8 6 722 728 12017 Internatio 8 6 135 1472017 Internatio 8 6 299 3042017 Internatio 8 6 813 8212017 Internatio 8 6 176 1892017 Internatio 8 1 110 119 12017 Internatio 93 6 278 282 10.3238/zf2017 Internatio 8 6 695 7032017 Internatio 8 6 796 8032016 Internatio 7 6 378 387 12016 Internatio 7 6 132 141 22016 Internatio 7 6 642 659 22016 Internatio 7 6 296 3082016 Internatio 7 6 31 402016 Internatio 7 6 493 501 22016 Internatio 7 6 41 44 12016 Internatio 7 6 45 57 22016 Internatio 7 6 175 198 62016 Internatio 7 6 225 235 32016 Internatio 7 6 76 85 42016 Internatio 7 6 22 30 22016 Internatio 7 6 483 492 12016 Internatio 7 6 9 21 22016 Internatio 7 6 276 2832016 Internatio 7 6 399 4092016 Internatio 7 6 410 416 32016 Internatio 7 6 245 252 42016 Internatio 7 6 502 509 22016 Internatio 7 6 315 3222016 Internatio 7 6 271 2752016 Internatio 7 6 604 608 10

2016 Internatio 7 6 128 131 22016 Internatio 7 6 435 442 12016 Internatio 7 6 166 1742016 Internatio 7 6 417 4242016 Internatio 7 6 425 4342016 Internatio 7 6 547 554 12016 Internatio 7 6 555 564 12016 Internatio 7 6 323 3442016 Internatio 7 6 86 95 42016 Internatio 7 6 221 2242016 Internatio 7 6 1 8 12016 Internatio 7 6 459 4732016 Internatio 7 6 96 104 12016 Internatio 7 6 367 377 12016 Internatio 7 6 609 6172016 Internatio 7 6 577 588 12016 Internatio 7 6 565 576 12016 Internatio 7 6 518 527 52016 Internatio 7 6 618 623 32016 Internatio 7 6 634 641 22016 Internatio 7 6 345 366 22016 Internatio 7 6 58 75 12016 Internatio 7 6 624 633 12016 Internatio 7 6 388 3982016 Internatio 7 6 114 122 22016 Internatio 7 6 443 448 12016 Internatio 7 6 142 157 22016 Internatio 7 6 535 546 12016 Internatio 7 6 253 270 12016 Internatio 7 6 449 458 42016 Internatio 7 6 309 314 32016 Internatio 7 6 660 667 12016 Internatio 7 6 105 113 42016 Internatio 7 6 284 295 22016 Internatio 7 6 199 208 12016 Internatio 7 6 528 534 32016 Internatio 7 6 474 482 12016 Internatio 7 6 123 127 12016 Internatio 7 6 236 244 12016 Internatio 7 6 158 1652016 Internatio 7 6 589 6032016 Internatio 7 6 209 220 32016 Internatio 7 6 510 5172016 Internatio 7 5 1 82016 Internatio 7 5 86 96 12016 Internatio 7 5 117 126 12016 Internatio 7 5 193 1992016 Internatio 7 5 177 183 3

2016 Internatio 7 5 368 3792016 Internatio 7 5 380 387 22016 Internatio 7 5 344 355 12016 Internatio 7 5 272 277 32016 Internatio 7 5 75 79 12016 Internatio 7 5 285 3152016 Internatio 7 5 156 176 42016 Internatio 7 5 330 3352016 Internatio 7 5 127 132 52016 Internatio 7 5 31 37 12016 Internatio 7 5 38 45 52016 Internatio 7 5 80 85 52016 Internatio 7 5 18 30 12016 Internatio 7 5 200 208 12016 Internatio 7 5 336 343 12016 Internatio 7 5 9 17 32016 Internatio 7 5 417 421 12016 Internatio 7 5 133 141 22016 Internatio 7 5 97 105 12016 Internatio 7 5 278 2842016 Internatio 7 5 407 4162016 Internatio 7 5 241 249 32016 Internatio 7 5 221 240 42016 Internatio 7 5 316 320 32016 Internatio 7 5 46 56 22016 Internatio 7 5 321 329 42016 Internatio 7 5 57 642016 Internatio 7 5 388 397 32016 Internatio 7 5 209 220 62016 Internatio 7 5 65 74 12016 Internatio 7 5 106 116 12016 Internatio 7 5 398 406 12016 Internatio 7 5 250 2712016 Internatio 7 5 142 155 12016 Internatio 7 5 356 367 22016 Internatio 7 5 184 1922016 Internatio 7 4 143 151 32016 Internatio 7 4 96 1132016 Internatio 7 4 38 47 32016 Internatio 7 4 249 255 22016 Internatio 7 4 212 220 12016 Internatio 7 4 281 288 22016 Internatio 7 4 256 266 52016 Internatio 7 4 22 28 12016 Internatio 7 4 175 1822016 Internatio 7 4 196 204 42016 Internatio 7 4 243 248 12016 Internatio 7 4 85 95 1

2016 Internatio 7 4 125 130 12016 Internatio 7 4 165 1742016 Internatio 7 4 221 226 32016 Internatio 7 4 61 74 52016 Internatio 7 4 75 84 42016 Internatio 7 4 205 211 32016 Internatio 7 4 227 2332016 Internatio 7 4 8 21 52016 Internatio 7 4 48 602016 Internatio 7 4 234 242 52016 Internatio 7 4 189 195 12016 Internatio 7 4 114 124 22016 Internatio 7 4 267 280 22016 Internatio 7 4 183 188 42016 Internatio 7 4 131 1422016 Internatio 7 4 152 164 22016 Internatio 7 4 289 299 42016 Internatio 7 4 1 7 52016 Internatio 7 4 29 37 32016 Internatio 7 3 276 284 12016 Internatio 7 3 306 3192016 Internatio 7 3 125 138 102016 Internatio 7 3 240 2482016 Internatio 7 3 38 52 22016 Internatio 7 3 320 328 12016 Internatio 7 3 139 1492016 Internatio 7 3 193 1992016 Internatio 7 3 426 4362016 Internatio 7 3 1 122016 Internatio 7 3 182 192 32016 Internatio 7 3 267 275 72016 Internatio 7 3 112 128 12016 Internatio 7 3 13 28 22016 Internatio 7 3 150 1602016 Internatio 7 3 119 124 22016 Internatio 7 3 86 101 52016 Internatio 7 3 360 3672016 Internatio 7 3 102 111 42016 Internatio 7 3 351 359 42016 Internatio 7 3 285 298 52016 Internatio 7 3 329 341 12016 Internatio 7 3 396 409 12016 Internatio 7 3 53 62 32016 Internatio 7 3 387 395 32016 Internatio 7 3 200 212 22016 Internatio 7 3 63 77 52016 Internatio 7 3 161 169 52016 Internatio 7 3 213 224 1

2016 Internatio 7 3 249 2662016 Internatio 7 3 225 239 12016 Internatio 7 3 78 85 42016 Internatio 7 3 368 386 12016 Internatio 7 3 170 1932016 Internatio 7 3 299 305 82016 Internatio 7 3 410 425 12016 Internatio 7 3 29 37 22016 Internatio 7 3 342 350 32016 Internatio 7 2 135 147 32016 Internatio 7 2 62 68 12016 Internatio 7 2 288 299 32016 Internatio 7 2 168 176 12016 Internatio 7 2 196 207 22016 Internatio 7 2 232 2432016 Internatio 7 2 261 2652016 Internatio 7 2 39 44 22016 Internatio 7 2 83 90 92016 Internatio 7 2 307 320 72016 Internatio 7 2 91 100 12016 Internatio 7 2 76 82 12016 Internatio 7 2 25 32 22016 Internatio 7 2 101 114 52016 Internatio 7 2 273 281 92016 Internatio 7 2 282 2872016 Internatio 7 2 1 10 22016 Internatio 7 2 148 167 12016 Internatio 7 2 69 752016 Internatio 7 2 208 211 82016 Internatio 7 2 115 1302016 Internatio 7 2 45 54 22016 Internatio 7 2 212 2312016 Internatio 7 2 177 186 82016 Internatio 7 2 33 382016 Internatio 7 2 300 3062016 Internatio 7 2 131 134 22016 Internatio 7 2 55 612016 Internatio 7 2 244 260 12016 Internatio 7 2 187 1902016 Internatio 7 2 191 195 22016 Internatio 7 2 11 24 82016 Internatio 7 2 266 2722016 Internatio 7 1 119 1302016 Internatio 7 1 225 231 12016 Internatio 7 1 37 41 12016 Internatio 7 1 11 25 12016 Internatio 7 1 180 189 12016 Internatio 7 1 141 145 2

2016 Internatio 7 1 67 77 92016 Internatio 7 1 1 42016 Internatio 7 1 58 66 12016 Internatio 7 1 26 36 12016 Internatio 7 1 99 109 12016 Internatio 7 1 190 202 22016 Internatio 7 1 146 153 12016 Internatio 7 1 90 98 12016 Internatio 7 1 203 213 42016 Internatio 7 1 42 57 12016 Internatio 7 1 78 89 12016 Internatio 7 1 154 163 32016 Internatio 7 1 5 10 32016 Internatio 7 1 172 1792016 Internatio 7 1 164 171 12016 Internatio 7 1 110 1182016 Internatio 7 1 214 224 5

776

Link Document Source EIDhttps://w Article Scopus 2-s2.0-85026448580https://w Article Scopus 2-s2.0-85026453501https://w Article Scopus 2-s2.0-85026462901https://w Article Scopus 2-s2.0-85026465377https://w Article Scopus 2-s2.0-85026481335https://w Article Scopus 2-s2.0-85026460322https://w Article Scopus 2-s2.0-85026460047https://w Article Scopus 2-s2.0-85026443630https://w Article Scopus 2-s2.0-85026434047https://w Article Scopus 2-s2.0-85026447504https://w Article Scopus 2-s2.0-85026487317https://w Article Scopus 2-s2.0-85026447563https://w Article Scopus 2-s2.0-85026452065https://w Article Scopus 2-s2.0-85026463844https://w Article Scopus 2-s2.0-85026443190https://w Article Scopus 2-s2.0-85026458005https://w Review Scopus 2-s2.0-85026478056https://w Article Scopus 2-s2.0-85026434264https://w Article Scopus 2-s2.0-85026486756https://w Article Scopus 2-s2.0-85026441712https://w Article Scopus 2-s2.0-85026450259https://w Article Scopus 2-s2.0-85026437059https://w Article Scopus 2-s2.0-85026462715https://w Article Scopus 2-s2.0-85026466688https://w Article Scopus 2-s2.0-85026450039https://w Article Scopus 2-s2.0-85026481906https://w Article Scopus 2-s2.0-85026469312https://w Article Scopus 2-s2.0-85026442569https://w Article Scopus 2-s2.0-85026443424https://w Review Scopus 2-s2.0-85026455305https://w Article Scopus 2-s2.0-85026463924https://w Article Scopus 2-s2.0-85026441901https://w Article Scopus 2-s2.0-85026487715https://w Article Scopus 2-s2.0-85026485071https://w Article Scopus 2-s2.0-85026463313https://w Article Scopus 2-s2.0-85026455360https://w Article Scopus 2-s2.0-85026438423https://w Article Scopus 2-s2.0-85026441723https://w Article Scopus 2-s2.0-85026457761https://w Article Scopus 2-s2.0-85026477953https://w Article Scopus 2-s2.0-85026490347https://w Article Scopus 2-s2.0-85026483780https://w Article Scopus 2-s2.0-85026468028https://w Article Scopus 2-s2.0-85026459708https://w Article Scopus 2-s2.0-85026438922https://w Article Scopus 2-s2.0-85026480219https://w Article Scopus 2-s2.0-85026437541

https://w Article Scopus 2-s2.0-85026437305https://w Article Scopus 2-s2.0-85026442672https://w Article Scopus 2-s2.0-85026441552https://w Article Scopus 2-s2.0-85026454349https://w Article Scopus 2-s2.0-85026434964https://w Article Scopus 2-s2.0-85026490405https://w Article Scopus 2-s2.0-85026461574https://w Review Scopus 2-s2.0-85026488561https://w Article Scopus 2-s2.0-85026472840https://w Article Scopus 2-s2.0-85026488248https://w Article Scopus 2-s2.0-85026462856https://w Article Scopus 2-s2.0-85026453556https://w Article Scopus 2-s2.0-85026487630https://w Article Scopus 2-s2.0-85026444467https://w Article Scopus 2-s2.0-85026437557https://w Article Scopus 2-s2.0-85026468340https://w Article Scopus 2-s2.0-85026464992https://w Article Scopus 2-s2.0-85026464330https://w Article Scopus 2-s2.0-85026478079https://w Article Scopus 2-s2.0-85026458564https://w Article Scopus 2-s2.0-85026441805https://w Article Scopus 2-s2.0-85026451215https://w Article Scopus 2-s2.0-85026489578https://w Article Scopus 2-s2.0-85026434882https://w Article Scopus 2-s2.0-85026489302https://w Article Scopus 2-s2.0-85026442834https://w Article Scopus 2-s2.0-85026450192https://w Article Scopus 2-s2.0-85026434176https://w Article Scopus 2-s2.0-85026445322https://w Review Scopus 2-s2.0-85026472383https://w Article Scopus 2-s2.0-85026487103https://w Article Scopus 2-s2.0-85026434323https://w Article Scopus 2-s2.0-85026455760https://w Article Scopus 2-s2.0-85026460167https://w Article Scopus 2-s2.0-85026466449https://w Article Scopus 2-s2.0-85026461568https://w Article Scopus 2-s2.0-85026435963https://wwArticle Scopus 2-s2.0-85026479949https://w Article Scopus 2-s2.0-85026485489https://w Article Scopus 2-s2.0-85026460336https://w Article Scopus 2-s2.0-85026443065https://w Article Scopus 2-s2.0-85026459649https://w Article Scopus 2-s2.0-85026450362https://w Article Scopus 2-s2.0-85026447049https://w Article Scopus 2-s2.0-85026443331https://w Article Scopus 2-s2.0-85026449789https://w Article Scopus 2-s2.0-85026480588https://w Article Scopus 2-s2.0-85026442416

https://w Article Scopus 2-s2.0-85026478396https://w Article Scopus 2-s2.0-85026454822https://w Article Scopus 2-s2.0-85026461867https://w Article Scopus 2-s2.0-85026449992https://w Article Scopus 2-s2.0-85026488005https://w Article Scopus 2-s2.0-85026453398https://w Article Scopus 2-s2.0-85026449923https://w Review Scopus 2-s2.0-85026446356https://w Article Scopus 2-s2.0-85026452274https://w Article Scopus 2-s2.0-85026447759https://w Article Scopus 2-s2.0-85026444465https://w Article Scopus 2-s2.0-85026442107https://w Article Scopus 2-s2.0-85026437657https://w Article Scopus 2-s2.0-85026440862https://w Article Scopus 2-s2.0-85026468440https://w Article Scopus 2-s2.0-85026453858https://w Article Scopus 2-s2.0-85026473062https://w Article Scopus 2-s2.0-85026464969https://w Article Scopus 2-s2.0-85026478540https://w Article Scopus 2-s2.0-85026463707https://w Article Scopus 2-s2.0-85026452612https://w Article Scopus 2-s2.0-85026486680https://w Article Scopus 2-s2.0-85026445112https://w Article Scopus 2-s2.0-85026442860https://w Article Scopus 2-s2.0-85026478310https://w Article Scopus 2-s2.0-85026489875https://w Article Scopus 2-s2.0-85026447306https://w Article Scopus 2-s2.0-85026456550https://w Article Scopus 2-s2.0-85026488374https://w Article Scopus 2-s2.0-85026473202https://w Article Scopus 2-s2.0-85026469160https://w Article Scopus 2-s2.0-85026490987https://w Article Scopus 2-s2.0-85026454000https://w Article Scopus 2-s2.0-85026451993https://w Article Scopus 2-s2.0-85026482862https://w Article Scopus 2-s2.0-85026472500https://w Article Scopus 2-s2.0-85026479570https://w Article Scopus 2-s2.0-85026457202https://w Article Scopus 2-s2.0-85026460188https://w Article Scopus 2-s2.0-85026483791https://w Article Scopus 2-s2.0-85026446571https://w Article Scopus 2-s2.0-85026480562https://w Article Scopus 2-s2.0-85026480359https://w Article Scopus 2-s2.0-85026442794https://w Article Scopus 2-s2.0-85026455155https://w Article Scopus 2-s2.0-85026482287https://w Article Scopus 2-s2.0-85026438685https://w Article Scopus 2-s2.0-85026444327

https://w Article Scopus 2-s2.0-85026475802https://w Article Scopus 2-s2.0-85026462379https://w Article Scopus 2-s2.0-85026481142https://w Article Scopus 2-s2.0-85026484405https://w Article Scopus 2-s2.0-85026476816https://w Article Scopus 2-s2.0-85026463459https://w Article Scopus 2-s2.0-85026460148https://w Article Scopus 2-s2.0-85026469785https://w Article Scopus 2-s2.0-85026480894https://w Article Scopus 2-s2.0-85026485600https://w Article Scopus 2-s2.0-85026449017https://w Article Scopus 2-s2.0-85026444246https://w Article Scopus 2-s2.0-85026479548https://w Article Scopus 2-s2.0-85026485223https://w Article Scopus 2-s2.0-85026442274https://w Article Scopus 2-s2.0-85026479551https://w Article Scopus 2-s2.0-85026488640https://w Article Scopus 2-s2.0-85026457357https://w Article Scopus 2-s2.0-85026487768https://w Article Scopus 2-s2.0-85026454118https://w Article Scopus 2-s2.0-85026473637https://w Article Scopus 2-s2.0-85026484144https://w Article Scopus 2-s2.0-85026468548https://w Article Scopus 2-s2.0-85026438592https://w Article Scopus 2-s2.0-85026437566https://w Article Scopus 2-s2.0-85026445877https://w Article Scopus 2-s2.0-85026474489https://w Article Scopus 2-s2.0-85026437354https://w Article Scopus 2-s2.0-85026466812https://w Article Scopus 2-s2.0-85026434101https://w Article Scopus 2-s2.0-85026436620https://w Article Scopus 2-s2.0-85026455519https://w Article Scopus 2-s2.0-85026448334https://w Article Scopus 2-s2.0-85026476875https://w Article Scopus 2-s2.0-85026465253https://w Article Scopus 2-s2.0-85026450377https://w Article Scopus 2-s2.0-85026484480https://w Article Scopus 2-s2.0-85026449937https://w Article Scopus 2-s2.0-85026472975https://w Article Scopus 2-s2.0-85026471119https://w Review Scopus 2-s2.0-85026467247https://w Article Scopus 2-s2.0-85026490242https://w Article Scopus 2-s2.0-85026444262https://w Article Scopus 2-s2.0-85026480468https://wwArticle Scopus 2-s2.0-85026434526https://w Article Scopus 2-s2.0-85026442596https://w Article Scopus 2-s2.0-85026480435https://w Article Scopus 2-s2.0-85026449030

https://w Review Scopus 2-s2.0-85026443970https://w Article Scopus 2-s2.0-85026441925https://w Article Scopus 2-s2.0-85026478300https://w Article Scopus 2-s2.0-85026457092https://w Article Scopus 2-s2.0-85026445948https://w Article Scopus 2-s2.0-85026438714https://w Article Scopus 2-s2.0-85026442547https://w Article Scopus 2-s2.0-85026476158https://w Article Scopus 2-s2.0-85026459710https://w Article Scopus 2-s2.0-85026488475https://w Article Scopus 2-s2.0-85026453317https://w Article Scopus 2-s2.0-85026460835https://w Article Scopus 2-s2.0-85026467698https://w Article Scopus 2-s2.0-85026438008https://w Article Scopus 2-s2.0-85026443759https://w Article Scopus 2-s2.0-85026447097https://w Article Scopus 2-s2.0-85026468252https://w Article Scopus 2-s2.0-85026445319https://w Article Scopus 2-s2.0-85026482038https://w Article Scopus 2-s2.0-85026468496https://w Article Scopus 2-s2.0-85026451237https://w Article Scopus 2-s2.0-85021661539https://w Article Scopus 2-s2.0-85026200158https://w Article Scopus 2-s2.0-85026210341https://w Article Scopus 2-s2.0-85026286152https://w Article Scopus 2-s2.0-85026272650https://w Article Scopus 2-s2.0-85022007148https://w Article Scopus 2-s2.0-85020185014https://w Article Scopus 2-s2.0-85019586835https://w Article Scopus 2-s2.0-85019566339https://w Article Scopus 2-s2.0-85020162086https://w Article Scopus 2-s2.0-85020212662https://w Article Scopus 2-s2.0-85019571861https://w Article Scopus 2-s2.0-85019627650https://w Article Scopus 2-s2.0-85019584891https://w Article Scopus 2-s2.0-85020195545https://w Article Scopus 2-s2.0-85019608770https://w Article Scopus 2-s2.0-85019598143https://w Article Scopus 2-s2.0-85020185966https://w Article Scopus 2-s2.0-85020188530https://w Article Scopus 2-s2.0-85019566126https://w Review Scopus 2-s2.0-85020175715https://w Article Scopus 2-s2.0-85020202164https://w Article Scopus 2-s2.0-85019565764https://w Article Scopus 2-s2.0-85019592183https://w Article Scopus 2-s2.0-85020187420https://w Article Scopus 2-s2.0-85019540098https://w Review Scopus 2-s2.0-85019599717

https://w Article Scopus 2-s2.0-85020179481https://w Article Scopus 2-s2.0-85020233264https://w Article Scopus 2-s2.0-85019645395https://w Article Scopus 2-s2.0-85020194254https://wwArticle Scopus 2-s2.0-85019638932https://w Article Scopus 2-s2.0-85020210822https://w Article Scopus 2-s2.0-85020210991https://w Article Scopus 2-s2.0-85020170383https://w Article Scopus 2-s2.0-85019599389https://w Article Scopus 2-s2.0-85020192376https://wwArticle Scopus 2-s2.0-85019619240https://w Article Scopus 2-s2.0-85019567196https://w Article Scopus 2-s2.0-85019545855https://w Article Scopus 2-s2.0-85020192060https://w Article Scopus 2-s2.0-85019539808https://w Review Scopus 2-s2.0-85020192032https://w Article Scopus 2-s2.0-85019550626https://w Article Scopus 2-s2.0-85019560318https://w Article Scopus 2-s2.0-85020172872https://w Article Scopus 2-s2.0-85019624414https://w Article Scopus 2-s2.0-85019549754https://w Article Scopus 2-s2.0-85019607709https://w Article Scopus 2-s2.0-85019584709https://w Article Scopus 2-s2.0-85019566206https://w Article Scopus 2-s2.0-85019558530https://w Article Scopus 2-s2.0-85019579183https://w Article Scopus 2-s2.0-85019646882https://w Article Scopus 2-s2.0-85019587105https://w Article Scopus 2-s2.0-85019563633https://w Article Scopus 2-s2.0-85019633037https://w Article Scopus 2-s2.0-85019582958https://w Article Scopus 2-s2.0-85019621121https://w Article Scopus 2-s2.0-85020203830https://w Article Scopus 2-s2.0-85019583442https://w Article Scopus 2-s2.0-85019599703https://w Article Scopus 2-s2.0-85019592003https://w Article Scopus 2-s2.0-85019554878https://w Article Scopus 2-s2.0-85020232289https://w Article Scopus 2-s2.0-85019581850https://w Article Scopus 2-s2.0-85019555574https://w Article Scopus 2-s2.0-85020205908https://w Article Scopus 2-s2.0-85019630714https://w Article Scopus 2-s2.0-85019564757https://w Article Scopus 2-s2.0-85019644715https://w Article Scopus 2-s2.0-85019549701https://w Article Scopus 2-s2.0-85019583549https://w Article Scopus 2-s2.0-85019582447https://w Article Scopus 2-s2.0-85020162785

https://w Article Scopus 2-s2.0-85019600133https://w Article Scopus 2-s2.0-85019606620https://w Article Scopus 2-s2.0-85019580507https://w Article Scopus 2-s2.0-85019599828https://w Article Scopus 2-s2.0-85020224454https://w Article Scopus 2-s2.0-85019611185https://w Article Scopus 2-s2.0-85019563224https://w Article Scopus 2-s2.0-85020172081https://w Article Scopus 2-s2.0-85019552404https://w Article Scopus 2-s2.0-85019566215https://w Article Scopus 2-s2.0-85019581180https://w Article Scopus 2-s2.0-85019603080https://w Article Scopus 2-s2.0-85020179973https://w Review Scopus 2-s2.0-85019597357https://w Article Scopus 2-s2.0-85019613329https://w Article Scopus 2-s2.0-85020168242https://w Article Scopus 2-s2.0-85020188440https://w Article Scopus 2-s2.0-85020203653https://w Article Scopus 2-s2.0-85019576461https://w Article Scopus 2-s2.0-85019548818https://w Article Scopus 2-s2.0-85020178882https://w Article Scopus 2-s2.0-85020172371https://w Article Scopus 2-s2.0-85019590595https://w Article Scopus 2-s2.0-85019592534https://w Article Scopus 2-s2.0-85020174901https://w Article Scopus 2-s2.0-85020235798https://w Article Scopus 2-s2.0-85020204816https://w Article Scopus 2-s2.0-85019647247https://w Article Scopus 2-s2.0-85019644320https://w Article Scopus 2-s2.0-85019586417https://w Article Scopus 2-s2.0-85019585515https://w Article Scopus 2-s2.0-85019542546https://w Article Scopus 2-s2.0-85020215570https://w Article Scopus 2-s2.0-85020199258https://w Article Scopus 2-s2.0-85019645792https://w Article Scopus 2-s2.0-85019607868https://w Article Scopus 2-s2.0-85019583004https://w Article Scopus 2-s2.0-85019623026https://w Article Scopus 2-s2.0-85019591168https://w Article Scopus 2-s2.0-85019544913https://w Article Scopus 2-s2.0-85019610218https://w Article Scopus 2-s2.0-85019571527https://w Article Scopus 2-s2.0-85019583118https://w Article Scopus 2-s2.0-85019566344https://w Article Scopus 2-s2.0-85019584615https://w Article Scopus 2-s2.0-85019549828https://w Article Scopus 2-s2.0-85019584485https://w Article Scopus 2-s2.0-85019556637

https://w Article Scopus 2-s2.0-85019573767https://w Article Scopus 2-s2.0-85019568024https://w Article Scopus 2-s2.0-85018745556https://w Article Scopus 2-s2.0-85018730780https://w Article Scopus 2-s2.0-85019264423https://w Article Scopus 2-s2.0-85019184018https://w Article Scopus 2-s2.0-85019205307https://w Article Scopus 2-s2.0-85018748293https://w Article Scopus 2-s2.0-85018770482https://w Article Scopus 2-s2.0-85019196014https://w Short Surv Scopus 2-s2.0-85019205333https://w Article Scopus 2-s2.0-85019186874https://w Article Scopus 2-s2.0-85018774853https://w Article Scopus 2-s2.0-85019198948https://w Article Scopus 2-s2.0-85018731104https://w Article Scopus 2-s2.0-85019240611https://w Article Scopus 2-s2.0-85018782009https://w Article Scopus 2-s2.0-85018748849https://w Article Scopus 2-s2.0-85018753186https://w Article Scopus 2-s2.0-85018736640https://w Article Scopus 2-s2.0-85019250076https://w Article Scopus 2-s2.0-85018788960https://w Article Scopus 2-s2.0-85018743094https://w Article Scopus 2-s2.0-85019259306https://w Article Scopus 2-s2.0-85018729009https://w Article Scopus 2-s2.0-85019255064https://w Article Scopus 2-s2.0-85018780022https://w Article Scopus 2-s2.0-85019173950https://w Article Scopus 2-s2.0-85018790852https://w Article Scopus 2-s2.0-85018757042https://w Article Scopus 2-s2.0-85018738343https://w Article Scopus 2-s2.0-85018763167https://w Review Scopus 2-s2.0-85018781769https://w Article Scopus 2-s2.0-85019233717https://w Review Scopus 2-s2.0-85019251817https://w Article Scopus 2-s2.0-85019233511https://w Article Scopus 2-s2.0-85018743892https://w Article Scopus 2-s2.0-85019221741https://w Article Scopus 2-s2.0-85019202049https://w Article Scopus 2-s2.0-85018789644https://w Article Scopus 2-s2.0-85019203326https://w Article Scopus 2-s2.0-85018750330https://w Article Scopus 2-s2.0-85018732901https://w Article Scopus 2-s2.0-85019231595https://w Article Scopus 2-s2.0-85019214824https://w Article Scopus 2-s2.0-85018752465https://w Review Scopus 2-s2.0-85018732014https://w Article Scopus 2-s2.0-85019224397

https://w Article Scopus 2-s2.0-85018773843https://w Article Scopus 2-s2.0-85019226057https://w Article Scopus 2-s2.0-85018790836https://w Article Scopus 2-s2.0-85018764894https://w Article Scopus 2-s2.0-85019177923https://w Article Scopus 2-s2.0-85018602316https://w Article Scopus 2-s2.0-85018547672https://w Review Scopus 2-s2.0-85018572493https://w Article Scopus 2-s2.0-85018585290https://w Article Scopus 2-s2.0-85018570072https://w Article Scopus 2-s2.0-85018563010https://w Article Scopus 2-s2.0-85018583614https://w Article Scopus 2-s2.0-85018576050https://w Article Scopus 2-s2.0-85018548761https://w Article Scopus 2-s2.0-85018554514https://w Article Scopus 2-s2.0-85018568581https://w Article Scopus 2-s2.0-85018540389https://w Article Scopus 2-s2.0-85018560734https://w Article Scopus 2-s2.0-85018532947https://wwArticle Scopus 2-s2.0-85018581738https://w Article Scopus 2-s2.0-85018600998https://w Article Scopus 2-s2.0-85018605031https://w Article Scopus 2-s2.0-85018614850https://w Article Scopus 2-s2.0-85018576267https://w Review Scopus 2-s2.0-85018612803https://w Article Scopus 2-s2.0-85018538108https://w Article Scopus 2-s2.0-85018593204https://w Review Scopus 2-s2.0-85018577056https://w Article Scopus 2-s2.0-85018582826https://w Article Scopus 2-s2.0-85018576271https://w Article Scopus 2-s2.0-85018551010https://w Article Scopus 2-s2.0-85018540106https://w Article Scopus 2-s2.0-85018590228https://w Article Scopus 2-s2.0-85018565953https://w Article Scopus 2-s2.0-85018613632https://w Article Scopus 2-s2.0-85018537403https://w Article Scopus 2-s2.0-85018583874https://w Review Scopus 2-s2.0-85018614646https://w Article Scopus 2-s2.0-85018612584https://wwArticle Scopus 2-s2.0-85018572632https://w Article Scopus 2-s2.0-85018586586https://w Article Scopus 2-s2.0-85018531196https://w Article Scopus 2-s2.0-85018607228https://w Article Scopus 2-s2.0-85018571088https://w Article Scopus 2-s2.0-85018540451https://w Article Scopus 2-s2.0-85018565187https://w Article Scopus 2-s2.0-85018593713https://w Article Scopus 2-s2.0-85018556575

https://w Article Scopus 2-s2.0-85018546454https://w Article Scopus 2-s2.0-85018549391https://w Article Scopus 2-s2.0-85018542190https://w Article Scopus 2-s2.0-85018543934https://w Article Scopus 2-s2.0-85018595100https://w Article Scopus 2-s2.0-85018538736https://w Article Scopus 2-s2.0-85018573420https://w Article Scopus 2-s2.0-85018712965https://w Article Scopus 2-s2.0-85018674384https://w Article Scopus 2-s2.0-85018680059https://w Article Scopus 2-s2.0-85018668773https://w Article Scopus 2-s2.0-85018690415https://w Article Scopus 2-s2.0-85018689442https://w Article Scopus 2-s2.0-85018684662https://w Article Scopus 2-s2.0-85018697251https://w Article Scopus 2-s2.0-85018689819https://w Article Scopus 2-s2.0-85018585400https://w Review Scopus 2-s2.0-85018538696https://w Article Scopus 2-s2.0-85018680903https://w Article Scopus 2-s2.0-85018542018https://w Article Scopus 2-s2.0-85018684503https://w Article Scopus 2-s2.0-85018679536https://w Article Scopus 2-s2.0-85018697354https://w Article Scopus 2-s2.0-85018719804https://w Article Scopus 2-s2.0-85018707194https://w Article Scopus 2-s2.0-85018673812https://w Review Scopus 2-s2.0-85018698966https://w Article Scopus 2-s2.0-85018667608https://w Article Scopus 2-s2.0-85018690431https://w Article Scopus 2-s2.0-85018202224https://w Article Scopus 2-s2.0-85018565878https://w Article Scopus 2-s2.0-85018707167https://w Article Scopus 2-s2.0-85018712268https://w Article Scopus 2-s2.0-85018663694https://w Article Scopus 2-s2.0-85018663026https://w Article Scopus 2-s2.0-85018711865https://w Article Scopus 2-s2.0-85018596887https://w Article Scopus 2-s2.0-85018207361https://w Article Scopus 2-s2.0-85018697254https://w Article Scopus 2-s2.0-85018595428https://w Article Scopus 2-s2.0-85018679523https://w Article Scopus 2-s2.0-85018686267https://w Article Scopus 2-s2.0-85026219714https://w Article Scopus 2-s2.0-85026204315https://w Article Scopus 2-s2.0-85026224042https://w Article Scopus 2-s2.0-85026198253https://w Article Scopus 2-s2.0-85026260910https://w Article Scopus 2-s2.0-85018532386

https://w Article Scopus 2-s2.0-85018614314https://w Review Scopus 2-s2.0-85026197698https://w Article Scopus 2-s2.0-85026232798https://w Article Scopus 2-s2.0-85026231160https://w Article Scopus 2-s2.0-85026260451https://w Article Scopus 2-s2.0-85026223664https://w Article Scopus 2-s2.0-85026222982https://w Article Scopus 2-s2.0-85018542353https://w Article Scopus 2-s2.0-85018193824https://w Article Scopus 2-s2.0-85018607310https://w ConferenceScopus 2-s2.0-85021291051https://w Article Scopus 2-s2.0-85018591616https://w Article Scopus 2-s2.0-85018581322https://w Article Scopus 2-s2.0-85018566650https://w Article Scopus 2-s2.0-85026269657https://w Review Scopus 2-s2.0-85026212376https://w Article Scopus 2-s2.0-85026253756https://w Article Scopus 2-s2.0-85026192355https://w Article Scopus 2-s2.0-85018551834https://w Article Scopus 2-s2.0-85026205526https://w Article Scopus 2-s2.0-85026267532https://w Article Scopus 2-s2.0-85026248690https://w Review Scopus 2-s2.0-85026225606https://w Article Scopus 2-s2.0-85026194339https://w Article Scopus 2-s2.0-85026195110https://w Article Scopus 2-s2.0-85021283748https://w Article Scopus 2-s2.0-85026247033https://w Article Scopus 2-s2.0-85021287274https://w Article Scopus 2-s2.0-85018575951https://w Article Scopus 2-s2.0-85026204977https://w Article Scopus 2-s2.0-85026223838https://w Article Scopus 2-s2.0-85026269856https://w Article Scopus 2-s2.0-85026244535https://w Article Scopus 2-s2.0-85026254679https://w Article Scopus 2-s2.0-85026257512https://w Article Scopus 2-s2.0-85018535223https://w Article Scopus 2-s2.0-85018532158https://w Article Scopus 2-s2.0-85018620005https://w Article Scopus 2-s2.0-85026270191https://w Article Scopus 2-s2.0-85026215340https://w Article Scopus 2-s2.0-85026224851https://w Article Scopus 2-s2.0-85026247707https://w Article Scopus 2-s2.0-85018577151https://w Review Scopus 2-s2.0-85026261178https://w Article Scopus 2-s2.0-85026226858https://w Article Scopus 2-s2.0-85026220889https://w Article Scopus 2-s2.0-85026204673https://w Article Scopus 2-s2.0-85026232291

https://w Article Scopus 2-s2.0-85026264971https://w Article Scopus 2-s2.0-85018613373https://w Article Scopus 2-s2.0-85018193739https://w Article Scopus 2-s2.0-85018585015https://w Review Scopus 2-s2.0-85021270138https://w Editorial Scopus 2-s2.0-85021279749https://w Article Scopus 2-s2.0-85026255759https://w Article Scopus 2-s2.0-85018590831https://w Article Scopus 2-s2.0-85026215858https://w Article Scopus 2-s2.0-85026201371https://w Article Scopus 2-s2.0-85021274574https://w Review Scopus 2-s2.0-85021293237https://w Article Scopus 2-s2.0-85018532286https://w Article Scopus 2-s2.0-85018619107https://w Article Scopus 2-s2.0-85017684281https://w Article Scopus 2-s2.0-85026242652https://w Article Scopus 2-s2.0-85026263803https://w Note Scopus 2-s2.0-85021292105https://w Article Scopus 2-s2.0-85026263468https://w Article Scopus 2-s2.0-85026263239https://w Article Scopus 2-s2.0-85026268721https://w Article Scopus 2-s2.0-85026239884https://w Review Scopus 2-s2.0-85026228207https://w Article Scopus 2-s2.0-85026241723https://w Article Scopus 2-s2.0-85018532750https://w Article Scopus 2-s2.0-85026224718https://w Article Scopus 2-s2.0-85026232127https://w Article Scopus 2-s2.0-85026202108https://w Article Scopus 2-s2.0-85018620030https://w Article Scopus 2-s2.0-85026259103https://w Article Scopus 2-s2.0-85026193720https://w Article Scopus 2-s2.0-85026257385https://w Article Scopus 2-s2.0-85025701064https://w Review Scopus 2-s2.0-85026225175https://w Article Scopus 2-s2.0-85026229967https://w Article Scopus 2-s2.0-85026272354https://w Article Scopus 2-s2.0-85018556307https://w Article Scopus 2-s2.0-85018533813https://w Article Scopus 2-s2.0-85026208196https://w Article Scopus 2-s2.0-85026219946https://w Article Scopus 2-s2.0-85026268181https://w Article Scopus 2-s2.0-85026222649https://w Article Scopus 2-s2.0-85026254488https://w Article Scopus 2-s2.0-85026270408https://w Article Scopus 2-s2.0-85018562157https://w Article Scopus 2-s2.0-85018613577https://w Article Scopus 2-s2.0-85026198745https://w Article Scopus 2-s2.0-85026200139

https://w Article Scopus 2-s2.0-85026236282https://w Article Scopus 2-s2.0-85018619488https://w Article Scopus 2-s2.0-85026245572https://w Article Scopus 2-s2.0-85018571484https://w Article Scopus 2-s2.0-85021265313https://w Article Scopus 2-s2.0-85026194487https://w Article Scopus 2-s2.0-85026209009https://w Article Scopus 2-s2.0-85026196041https://wwArticle Scopus 2-s2.0-85026271634https://w Article Scopus 2-s2.0-85018540208https://w Article Scopus 2-s2.0-85018619768https://w Article Scopus 2-s2.0-85021920731https://w Article Scopus 2-s2.0-85026200347https://w Review Scopus 2-s2.0-85026225967https://w Article Scopus 2-s2.0-85026274150https://w Article Scopus 2-s2.0-85018551893https://w Article Scopus 2-s2.0-85026209210https://w Article Scopus 2-s2.0-85026242079https://w Article Scopus 2-s2.0-85026247184https://w Article Scopus 2-s2.0-85026203753https://w Article Scopus 2-s2.0-85026240055https://w Article Scopus 2-s2.0-85026200834https://w Article Scopus 2-s2.0-85018193884https://w Article Scopus 2-s2.0-85021275929https://w Article Scopus 2-s2.0-85026254939https://w Article Scopus 2-s2.0-85026232550https://w Article Scopus 2-s2.0-85018630025https://w Article Scopus 2-s2.0-85018659195https://w Article Scopus 2-s2.0-85018546464https://w Article Scopus 2-s2.0-85018641749https://w Article Scopus 2-s2.0-85018623599https://w Article Scopus 2-s2.0-85018655155https://w Article Scopus 2-s2.0-85018630044https://w Article Scopus 2-s2.0-85018651840https://w Review Scopus 2-s2.0-85018553403https://w Article Scopus 2-s2.0-85018200076https://w Article Scopus 2-s2.0-85018198744https://w Article Scopus 2-s2.0-85018472359https://w Article Scopus 2-s2.0-85018633215https://w Article Scopus 2-s2.0-85018660972https://w Review Scopus 2-s2.0-85018651051https://w Review Scopus 2-s2.0-85018647527https://w Article Scopus 2-s2.0-85018656427https://w Article Scopus 2-s2.0-85018627120https://w Article Scopus 2-s2.0-85018645036https://w Article Scopus 2-s2.0-85018646481https://w Article Scopus 2-s2.0-85018647890https://w Article Scopus 2-s2.0-85018194188

https://w Article Scopus 2-s2.0-85018609787https://w Article Scopus 2-s2.0-85018658770https://w Article Scopus 2-s2.0-85018635717https://w Article Scopus 2-s2.0-85018644208https://w Article Scopus 2-s2.0-85018627791https://w Article Scopus 2-s2.0-85018625763https://w Article Scopus 2-s2.0-85018646149https://w Article Scopus 2-s2.0-85018647215https://w Article Scopus 2-s2.0-85018570843https://w Article Scopus 2-s2.0-85018656204https://w Article Scopus 2-s2.0-85018636425https://w Article Scopus 2-s2.0-85018662330https://w Article Scopus 2-s2.0-85018627551https://w Article Scopus 2-s2.0-85018622814https://w Article Scopus 2-s2.0-85018659058https://w Article Scopus 2-s2.0-85018654066https://w Article Scopus 2-s2.0-85018658024https://w Article Scopus 2-s2.0-85018627793https://w Review Scopus 2-s2.0-85018531944https://w Article Scopus 2-s2.0-85018534465https://w Article Scopus 2-s2.0-85018565877https://w Article Scopus 2-s2.0-85018656001https://w Article Scopus 2-s2.0-85018531629https://w Article Scopus 2-s2.0-85018651240https://w Article Scopus 2-s2.0-85018601366https://w Article Scopus 2-s2.0-85018646254https://w Article Scopus 2-s2.0-85018636301https://w Article Scopus 2-s2.0-85018638253https://w Article Scopus 2-s2.0-85018617987https://w Article Scopus 2-s2.0-85018651895https://w Article Scopus 2-s2.0-85018533600https://w Article Scopus 2-s2.0-85018635232https://w Article Scopus 2-s2.0-85018653533https://w Article Scopus 2-s2.0-85018543586https://w Article Scopus 2-s2.0-85018659987https://w Review Scopus 2-s2.0-85018637550https://w Article Scopus 2-s2.0-85018622338https://w Article Scopus 2-s2.0-85018634095https://w Article Scopus 2-s2.0-85018597514https://w Article Scopus 2-s2.0-85018655691https://w Article Scopus 2-s2.0-85018655842https://w Article Scopus 2-s2.0-85018660531https://w Article Scopus 2-s2.0-85018662332https://w Review Scopus 2-s2.0-85018496823https://w Article Scopus 2-s2.0-85018495725https://w Article Scopus 2-s2.0-85018492770https://w Review Scopus 2-s2.0-85018495335https://w Article Scopus 2-s2.0-85018476791

https://w Article Scopus 2-s2.0-85017691894https://w Article Scopus 2-s2.0-85018486384https://w Article Scopus 2-s2.0-85017694378https://w Article Scopus 2-s2.0-85018499252https://w Article Scopus 2-s2.0-85018480940https://w Review Scopus 2-s2.0-85018519164https://w Article Scopus 2-s2.0-85018475761https://w Article Scopus 2-s2.0-85018529595https://w Article Scopus 2-s2.0-85018192918https://w Article Scopus 2-s2.0-85018517335https://w Review Scopus 2-s2.0-85018526252https://w Review Scopus 2-s2.0-85018478824https://w Article Scopus 2-s2.0-85018522430https://w Article Scopus 2-s2.0-85018527272https://w Article Scopus 2-s2.0-85018520429https://w Article Scopus 2-s2.0-85018502331https://w Article Scopus 2-s2.0-85018492435https://w Article Scopus 2-s2.0-85018520456https://w Article Scopus 2-s2.0-85018485265https://w Article Scopus 2-s2.0-85018505441https://w Article Scopus 2-s2.0-85018527612https://w Article Scopus 2-s2.0-85018523729https://w Article Scopus 2-s2.0-85018192849https://w Article Scopus 2-s2.0-85018471689https://w Article Scopus 2-s2.0-85018469057https://w Article Scopus 2-s2.0-85018511202https://w Article Scopus 2-s2.0-85018489077https://w Review Scopus 2-s2.0-85018461394https://w Article Scopus 2-s2.0-85018482683https://w Article Scopus 2-s2.0-85018529971https://w Article Scopus 2-s2.0-85018506343https://w Article Scopus 2-s2.0-85018528834https://w Review Scopus 2-s2.0-85018471625https://w Article Scopus 2-s2.0-85018487236https://w Article Scopus 2-s2.0-85018466853https://w Article Scopus 2-s2.0-85018462456https://w Article Scopus 2-s2.0-85018550224https://w Article Scopus 2-s2.0-85018624958https://w Article Scopus 2-s2.0-85018626348https://w Article Scopus 2-s2.0-85018654006https://w Article Scopus 2-s2.0-85018650076https://w Article Scopus 2-s2.0-85018585849https://w Article Scopus 2-s2.0-85018640948https://w Review Scopus 2-s2.0-85018650295https://w Article Scopus 2-s2.0-85018634803https://w Article Scopus 2-s2.0-85018628381https://w Article Scopus 2-s2.0-85018496517https://w Article Scopus 2-s2.0-85018199865

https://w Article Scopus 2-s2.0-85018641228https://w Article Scopus 2-s2.0-85018648669https://w Article Scopus 2-s2.0-85018532127https://w Article Scopus 2-s2.0-85018196508https://w Article Scopus 2-s2.0-85018641613https://w Article Scopus 2-s2.0-85018657208https://w Article Scopus 2-s2.0-85018638899https://w Article Scopus 2-s2.0-85018526990https://w Article Scopus 2-s2.0-85018627357https://w Article Scopus 2-s2.0-85018557657https://w Article Scopus 2-s2.0-85018625258https://w Article Scopus 2-s2.0-85018476547https://w Article Scopus 2-s2.0-85018634691https://w Review Scopus 2-s2.0-85018658198https://w Article Scopus 2-s2.0-85018622052https://w Article Scopus 2-s2.0-85018629367https://w Article Scopus 2-s2.0-85018612921https://w Article Scopus 2-s2.0-85018543905https://w Article Scopus 2-s2.0-85018633831https://w Article Scopus 2-s2.0-85017701891https://w Article Scopus 2-s2.0-85018477659https://w Article Scopus 2-s2.0-85018475166https://w Article Scopus 2-s2.0-85017672965https://wwArticle Scopus 2-s2.0-85018462284https://w Article Scopus 2-s2.0-85018504449https://w Article Scopus 2-s2.0-85018476142https://w Article Scopus 2-s2.0-85018476265https://w Article Scopus 2-s2.0-85018504950https://w Article Scopus 2-s2.0-85018508763https://w Article Scopus 2-s2.0-85018506676https://w Article Scopus 2-s2.0-85018484554https://w Article Scopus 2-s2.0-85018467187https://w Article Scopus 2-s2.0-85018480199https://w Article Scopus 2-s2.0-85018496250https://w Article Scopus 2-s2.0-85018505373https://w Article Scopus 2-s2.0-85018492988https://w Article Scopus 2-s2.0-85018521486https://w Article Scopus 2-s2.0-85018517363https://w Article Scopus 2-s2.0-85018484603https://w Article Scopus 2-s2.0-85018464364https://w Article Scopus 2-s2.0-85018484876https://w Article Scopus 2-s2.0-85018525875https://w Article Scopus 2-s2.0-85018192966https://w Article Scopus 2-s2.0-85017691109https://w Article Scopus 2-s2.0-85018503762https://w Article Scopus 2-s2.0-85018468854https://w Article Scopus 2-s2.0-85018491982https://w Article Scopus 2-s2.0-85018476247

https://w Article Scopus 2-s2.0-85018528080https://w Article Scopus 2-s2.0-85018501103https://w Article Scopus 2-s2.0-85018193481https://w Article Scopus 2-s2.0-85018484392https://w Article Scopus 2-s2.0-85018524136https://w Article Scopus 2-s2.0-85018468967https://w Article Scopus 2-s2.0-85017720276https://w Article Scopus 2-s2.0-85018516634https://w Article Scopus 2-s2.0-85018528490https://w Article Scopus 2-s2.0-85018518380https://w Article Scopus 2-s2.0-85017694359https://w Article Scopus 2-s2.0-85018495209https://w Article Scopus 2-s2.0-85018529870https://w Article Scopus 2-s2.0-85018193454https://w Article Scopus 2-s2.0-85018498362https://w Article Scopus 2-s2.0-85018499958https://w Article Scopus 2-s2.0-85018503197https://w Article Scopus 2-s2.0-85018482999https://w Article Scopus 2-s2.0-85018521613https://w Article Scopus 2-s2.0-85018519897https://w Article Scopus 2-s2.0-85018476764https://w Article Scopus 2-s2.0-85013292088https://w Article Scopus 2-s2.0-85018469736https://w Article Scopus 2-s2.0-85018477953https://w Article Scopus 2-s2.0-85018523939https://w Article Scopus 2-s2.0-85018193495https://w Article Scopus 2-s2.0-85018480902https://w Article Scopus 2-s2.0-85018463837https://w Article Scopus 2-s2.0-85018494466https://w Article Scopus 2-s2.0-85018500051https://w Article Scopus 2-s2.0-85018511593https://w Article Scopus 2-s2.0-85018517118https://w Article Scopus 2-s2.0-85018497667https://w Article Scopus 2-s2.0-85018471402https://w Article Scopus 2-s2.0-85018479977https://w Article Scopus 2-s2.0-85018501628https://w Article Scopus 2-s2.0-85018460376https://w Article Scopus 2-s2.0-85018460474https://wwArticle Scopus 2-s2.0-85018497168https://w Article Scopus 2-s2.0-85018474351https://w Article Scopus 2-s2.0-85018467157https://w Article Scopus 2-s2.0-85018461491https://w Article Scopus 2-s2.0-85018625468https://w Article Scopus 2-s2.0-85018625359https://w Article Scopus 2-s2.0-85018520197https://w Article Scopus 2-s2.0-85018631669https://w Article Scopus 2-s2.0-85018493397https://w Article Scopus 2-s2.0-85018662110

https://w Article Scopus 2-s2.0-85018196733https://w Article Scopus 2-s2.0-85018659632https://w Article Scopus 2-s2.0-85018651915https://w Article Scopus 2-s2.0-85018522401https://w Article Scopus 2-s2.0-85018498341https://w Article Scopus 2-s2.0-85018533944https://w Article Scopus 2-s2.0-85018651433https://w Article Scopus 2-s2.0-85018643271https://w Article Scopus 2-s2.0-85018575447https://w Article Scopus 2-s2.0-85018639360https://w Article Scopus 2-s2.0-85018538901https://w Article Scopus 2-s2.0-85018654995https://w Article Scopus 2-s2.0-85018591913https://w Article Scopus 2-s2.0-85018652326https://w Article Scopus 2-s2.0-85018525811https://w Article Scopus 2-s2.0-85018635099https://w Article Scopus 2-s2.0-85018524063