BRIGGS&STRATTON

WWW.POWERPRODUCTS.EU2015V1 COPYRIGHT ©2015. ALL RIGHTS RESERVED.

930 LITRES PER MINUTE

MAX. WATER FLOW RATE

KEY FEATURES

Powerful petrol performance - Briggs & Stratton INTEK™ I/C® engine with cast iron sleeve cylinder

Durability - Double ball bearing for longer life - Dual Clean™ air cleaner - Rubber feet for low vibration - Aluminium hose fittings

RELIABLE BRIGGS & STRATTON INTEK™ I/C® ENGINE WITH RECOIL START

930 LITRES PER MINUTE MAX. WATER FLOW RATE

CAST IRON IMPELLER AND VOLUTE

AUTOMATIC LOW OIL SHUTDOWN

FULL STEEL FRAME PROTECTION

WP3-65

BRIGGS&STRATTON

WWW.POWERPRODUCTS.EU2015V1 COPYRIGHT ©2015. ALL RIGHTS RESERVED.

Highly specified products powered by Briggs & Stratton engines, the Elite Series delivers superior performance for the demanding end user.

PERFORMANCEMaximum water flow rate 930 litres per min

Maximum water pressure (Bar) 2.37

FEATURESNoise level at 7m @ 25% load 101dB

Inlet / Outlet diameter (mm) 76

Maximum head lift (m) 33

Vertical suction lift (m) 8

Dual Clean™ air cleaner Yes

Automatic low oil shutdown Yes

Volute material Cast Iron

Impeller material Cast Iron

Frame Steel

Hose fittings material Aluminium

Anti-vibration system Yes

Weight (kg) 30.5

L x W x H (cm) 47 x 43 x 46

Warranty water pump 2 years limited consumer**

ENGINEEngine type Briggs & Stratton INTEK™ I/C®

Engine capacity 205cc

Cylinder Cast Iron sleeve

Double ball bearing Yes

Fuel tank capacity (l) 3.8

Starter Recoil

Warranty engine 2 years limited consumer**

* Visit www.BRIGGSandSTRATTON.com for warranty details.

CAST IRON VOLUTE & IMPELLER

WEIGHT AUTOMATIC LOW OIL SHUTDOWN

1

4

2

8

73

5

6

1. Long run metal fuel tank

2. Dual Clean™ air cleaner

3. Reliable Briggs & Stratton INTEK™ I/C® engine with cast iron sleeve

4. Double ball bearing

5. Automatic low oil shutdown

6. Rubber feet for low vibration

7. Cast iron volute and impeller

8. Full steel frame protection

ANTI-VIBRATION SYSTEM

ENGINE