WORLD CLASS 2018/19 · E. & O. E. SPECIFICATIONS MAY VARY OR CHANGE WITHOUT FURTHER NOTICE Page 4 PART NO. You Can’t Avoid Gravity! Freefall Winch TECHNICAL SPECIFICATIONS ˜ 2

STAINLESS STEEL CHANDLERY &PERFORMANCE BOATING ACCESSORIES

WORLD CLASS

10th ANNIVERSARY EDITION

Factory 1, 2 Network Drive Carrum Downs Victoria Australia 3201 Tel: 61 3 9708 2846 Fax: 61 3 9708 2845 [email protected]

product CATALOGUE

2018/19bellmarine.com.au

INDEX

FACTORY 1, 2 NETWORK DRIVECARRUM DOWNS VIC AUSTRALIA 3201TEL: 61 3 9708 2846 FAX: 61 3 9708 [email protected] [email protected]@[email protected]

10th ANNIVERSARY EDITIONA word from the Managing Director - Mr. Bell Chen

Dear Valued Dealer,

From our humble beginnings in 1997 situated in a 2000 sq feet warehouse in Seaford Victoria, where we purchased finished product from various manufacturers, to our current wholly owned manufacturing facility with over 16 staff plus a brand new warehouse/distribution facility in Carrum Downs, Victoria. Today Bell Marine is one of only a handful of premier stainless steel chandlery and marine accessories manufacturers that still hand-make and hand-polish all of our own products to a mirror finish without the use of chemical polishing.

This year we are pleased to anounce, we have now added a free fall drum winch to our range. The New Viper S Series (patent pending) GRAVITY FEED was developed inhouse by Bell Marine. After 3 years of R&D and 2 years of field testing the Viper Gravity Feed has now proven itself to be a serious contender in the high performance anchoring arena. The Gravity Feed winch is designed without any additional electronics, wiring or solenoids that can be the downfall in harsh boating environments.

Bell Marine also has achieved IP68 certification with our submersible range of anchor winches which includes our own design 316 marine grade worm drive stainless steel gear box, making VIPER the preferred choice to boaties all around the world. From design to finish, Bell Marine is the only winch company that manufactures our own stainless steel worm drive gearboxes in-house including all 1000W submersible electric motors which enable VIPER power up and down anchor winches to run at speeds of 50 metres per minute ensuring you get onto your GPS mark first time, each and every time.

To celebrate our 10th anniversary we have released our brand new Anniversary Edition VIPER Xtreme removable deck mount and side mount versions of our outriggers. Our 3 stage 16ft matte black poles are now equipped with spring loaded s/s pins to lock them into the extended position, giving you uninterrupted fishing.

All Viper Deluxe Removable Fibreglass baitboard/serving stations are now twin-skin construction enabling a high gloss gel-coat finish top and bottom which is unmatched in the marine industry. Our redesigned removable bait board legs complement board and enable easy instalation, each board and come complete with drain, hose, s/s clamp and deck fittings.

Thank you for your time and happy selling!

Bell ChenManaging Director

2-5

Anchor winches

bellmarine.com.auSPECIFICATIONS MAY VARY OR CHANGE

WITHOUT NOTICE1 E & O E

WORLD CLASS STAINLESS STEEL BOATING CHANDLERY & PERFORMANCE BOATING ACCESSORIES

19-20

Switches, Panels & Accessories

Spot Lights - InsideBack Cover

6-9Anchor winch

accessories

10-11Bait Boards

Seat Bases & Tackle Boxes

13-17

Rod Holders &Accessories

Chandlery & Accessories

S/S Rocket Launchers

18Berley Buckets, Cages

& Accessories

12Outriggers

21-22Workshop Service Kits

& Refill Packs

316 STAINLESS STEELWORM DRIVE GEAR BOX

Developed & Built by Bell Marinefor Marine applications

SUBMERSIBLE 316 STAINLESS STEEL1000W ELECTRIC MOTOR

Size Does Matter!Size Does Matter!More Power, More Torque, Smaller Package

MICRO DRUM WINCH DIMENSIONS

5YEAR

WARRANTY

45MtrsPer Minute

Fall Rate

30038-SPart Number

306mm

192mm

210m

m

28mm

330mm

237mm

120mm

100mm

80mm

198

�

90Ø

115m

m

IMMERSION PROOFIP68

E. & O. E.

30038-6S VIPER S SERIES ‘MICRO’ S/S MARINE GEARBOX BUNDLE 60MTRS D/BRAID ROPE RRP $1489 30038-4S VIPER S SERIES ‘MICRO’ S/S MARINE GEARBOX BUNDLE 100MTRS 4MM ROPE RRP $1595

Don’t be fooled by the name “MICRO” or by its size, this is one of the world’s most powerful electric drum winches for its size and was designed to fit into bow riders, tinnies, walk arounds and any boat with restricted anchor well space. It still has our famous Viper 1000 submersible electric motor coupled with stainless steel marine gearbox, solid 28mm stainless steel main shaft with 3 support bearings and comes with our iron clad 5-year Viper warranty. Constructed from 8mm plate 316 marine grade stainless steel (hand polished to a mirror finish) The MICRO’s drum rotates at a fall rate of 45mtrs per minute. Now with emergency manual release incase of power loss. Suits vessels from 4mtr right up to 8mtr.

INCLUDED IN THE S SERIES “MICRO” BUNDLE:

30038-A 30053 30053G 3002330006 30016 30034 3003530061 30073

ALLOY FITMENT KIT FOR ALL ALUMINIUM BOAT INSTALLATIONS BLACK 8MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN FLURO GREEN 8MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN SMALL HAWSE PIPE 316 S/S CAST FOR TRICKY INSTALLATIONS SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING WITH SAFETY HARNESS DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING WITH SFETY HARNESS FACTORY MADE MARINE WIRING LOOM BOATS UP TO 6MTRS FACTORY MADE MARINE WIRING LOOM BOATS UP TO 8MTRS

$ 30$ 34$ 34$139$239$329$259$299

OPTIONS:

MAX FALL RATE: 45MTRS PER MINUTEMAX RETRIEVAL RATE: 40MTRS PER MINUTESUIT VESSEL LENGTH: 4 MTRS +

WEIGHT: 15KGSPACKAGING:

WINCH BOX: 43 X 42 X 31CM 20KGROPE KIT: 23 X 23 X 21CM 6KG

VIPER S 1000 “MICRO” SUBMERSIBLE ELECTRIC DRUM ANCHOR WINCHVIPER S SERIES STAINLESS STEEL WORM DRIVE MARINE GEARBOX

SUPPLIED WITH 1 MTR OF 3 B&S POWER LEADS & JOINING CONNECTORS PRESSURE TESTED & SEALED

30038-S

3004560MTRS OF 6MM DOUBLE BRAID PREMIUM ROPE SPLICED TO 6 MTRS OF 6MM GALVANISED SHORT LINK ANCHOR CHAIN

30001VIPER PRO SERIES ANCHOR SWIVEL SMALL30009VIPER DELUXE ANCHOR ROLLER SMALL 30020200AMP REVERSING SOLENOID

LED ILLUMINATED MARINE ROCKER SWITCH 90021 VIPER LASER ETCHED LED ILLUMINATED SWITCH COVER 90046

100 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30046SINGLE LED SWITCH STAINLESS STEEL FACE PLATE 30051

COMBO LED SWITCH & CIRCUIT BREAKER S/S FACE PLATE 30052

5MM STAINLESS STEEL SANDWICH PLATE ALL FIXING HARDWARE + INSTALLATION NOTES & WIRING DIAGRAM

Viper s SERIES ‘MICRO’ 1000 ANCHOR WINCH BUNDLEThe All-New All-Stainless Steel Submersible Anchor Winch!30038-S

PART NO.

WINCH BUNDLES:

RRPRRPRRPRRPRRP

RRPRRPRRP

bellmarine.com.auSPECIFICATIONS MAY VARY OR CHANGEWITHOUT NOTICE

2E & O E


30051 30052

300019002130046

30020

30009

30045 ALL REQUIREDINSTALLATION

HARDWARE

CUSTOM MADE WIRING LOOM MADE TO YOUR SPECIFICATIONS SUIT ANY LENGTH BOAT OPTIONAL WIRELESS REMOTE CONTROL FOR ALL VIPER WINCHES - 30 METRE RANGE RRP $ 39

RRP POA

EMERGENCY MANUALRELEASE INCLUDED!

*INCLUDED at No Extra Cost*

When Performance Matters!When Performance Matters!

TECHNICAL SPECIFICATIONS

260mm

260m

m

375mm

28mm

120mm

360mm

237mm

120mm

80mm

�24

5.5

90Ø

138m

m

The Viper S Series Anchor Winch has set new standards in anchoring systems. The Viper commercial 1000W submersible electric motor and stainless steel marine gearbox, has made it one of the best selling anchor winches in Australia. With a fall rate of 50 meters per minute and a retrieval rate of over 45mtrs per minute the Viper will ensure you get onto your GPS mark. With unsurpassed Viper reliability, and more torque than a conventional drum winch, 3 support bearings on the 1 piece 28mm solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum, preventing rope jams and the need for additional guards. With our bullet proof 5-year Viper performance warranty, you can’t go past a Viper. Our winch bundles are supplied with everything you need to install it, including a 5mm stainless steel sandwich bracket, all required stainless steel bolts/screws and 2 face plates depending on dash room. All you have to add is your own cabling or our factory made Bell Marine tinned copper wiring loom. You won’t have to break your back pulling up your anchor and chain again! Now with emergency manual release included.

50MtrsPer Minute

Fall Rate

316 STAINLESS STEELWORM DRIVE GEAR BOX

Developed & Built by Bell Marinefor Marine applications

SUBMERSIBLE 316 STAINLESS STEEL1000W ELECTRIC MOTOR 5

YEARWARRANTY

IMMERSION PROOFIP68


ALL REQUIREDINSTALLATION

HARDWARE5MM STAINLESS STEEL SANDWICH PLATE

ALL FIXING HARDWARE + INSTALLATION NOTES & WIRING DIAGRAMMAX FALL RATE: 50MTRS PER MINUTE

MAX RETRIEVAL RATE: 45MTRS PER MINUTESUIT VESSEL LENGTH: 5.7 MTRS +

WEIGHT: 17.4KGS

Page 3

30021-8S VIPER S SERIES RAPID S/S MARINE GEARBOX BUNDLE 75MTRS 3 STRAND ROPE RRP $159530021-6S VIPER S SERIES RAPID S/S MARINE GEARBOX BUNDLE 100MTRS 6MM B/D ROPE RRP $159530021-5S VIPER S SERIES RAPID S/S MARINE GEARBOX BUNDLE 200MTRS 5MM HI SPEC ROPE RRP $1799

WINCH BUNDLES:

VIPER S SERIES 1000 SUBMERSIBLE ELECTRIC DRUM ANCHOR WINCHVIPER S SERIES STAINLESS STEEL WORM DRIVE MARINE GEARBOX

SUPPLIED WITH 1 MTR 3 B&S POWER LEADS & JOINING CONNECTORSPRESSURE TESTED & SEALED

30021-S THE “S” SERIES 1000 BUNDLE INCLUSIONS

3001075MTRS OF 8MM TRIPLE STRAND PREMIUM ROPESPLICED TO 8 MTRS OF 6MM GALVANISED SHORT LINK ANCHOR CHAIN


LED ILLUMINATED MARINE ROCKER SWITCH 90021 VIPER LASER ETCHED LED ILLUMINATED SWITCH COVER 90046

100 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30046SINGLE LED SWITCH STAINLESS STEEL FACE PLATE 30051

COMBO LED SWITCH & CIRCUIT BREAKER S/S FACE PLATE 30052

30021-A 30036 30036G 30023 30006 30016 30034 3003530061 30073

OPTIONS:ALLOY FITMENT KIT FOR ALUMINIUM BOAT INSTALLATIONS RRP BLACK 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN RRP FLURO GREEN 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN RRP 316 S/S CAST HAWSE PIPE FOR TRICKY INSTALLATIONS RRP SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING RRP DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING RRP FACTORY MADE MARINE WIRING LOOM BOATS UPTO 6MTRS RRP FACTORY MADE MARINE WIRING LOOM BOATS UPTO 8MTRS RRP

$35$39$39

$139$239$329$259$299

30051 30052

3000190021

30046

30020

3000930010

PACKAGING:WINCH BOX: 46 X 45 X 35 CM 23KGROPE KIT: 27 X 27 X 25 CM 9KG

Viper s SERIES ‘RAPID’ 1000 ANCHOR WINCH BUNDLEThe All-New All-Stainless Steel Submersible Anchor Winch!30021-S

PART NO.




CUSTOM MADE WIRING LOOM MADE TO YOUR SPECIFICATIONS SUIT ANY LENGTH BOATOPTIONAL WIRELESS REMOTE CONTROL FOR VIPER WINCHES - 30 METRE RANGE

POA RRP $39

RRP

EMERGENCY MANUALRELEASE INCLUDED!

WORLD CLASS STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIESE. & O. E.SPECIFICATIONS MAY VARY OR CHANGEWITHOUT FURTHER NOTICE

Page 4

PART NO.

You Can’t Avoid Gravity!You Can’t Avoid Gravity! Freefall Winch


�24

5.5

90Ø

138m

m

The New Viper S Series (patent pending) GRAVITY FEED was developed by Bell Marine. After 3 years of R&D and 2 years of field testing the Viper Gravity Feed has now proven itself to be a serious contender in the high performance anchoring arena. Our home grown mechanical freefall gives you the peace of mind, reliability, and performance not found in free spooling winches. The all-new all-stain-less steel Gravity Feed was designed without any additional electronics, wiring or solenoids that can be the downfall in harsh boating environments.The new drop speed will ensure your anchor hits the bottom exactly where you want it, when you want it. At the touch of a switch, the Viper Gravity Feed winch controls the drop speed to ensure no over spooling (can be set to match the size of your anchor), yet giving you ultimate speed and allowing you to get on to your GPS mark, FIRST TIME, EVERY TIME !!If you are anchoring in deep water the new Gravity Feed winch is for you - its quiet and efficient operation also conserves your battery and runs at up to 4 times faster than some drum winches using our mechanical patented design. If you require high performance anchoring then this is the one for you.

5YEAR

WARRANTY

IMMERSION PROOFIP68



HARDWARE5MM STAINLESS STEEL SANDWICH PLATE

ALL FIXING HARDWARE + INSTALLATION NOTES & WIRING DIAGRAMMAX FALL RATE: 138MTRS PER MINUTE

MAX RETRIEVAL RATE: 45MTRS PER MINUTESUIT VESSEL LENGTH: 5.7 MTRS +

WEIGHT: 23KGS

30072-6S VIPER GRAVITY FEED S SERIES WINCH BUNDLE 98MTRS 6MM B/D ROPE/CHAIN RRP $209530072-5S VIPER GRAVITY FEED S SERIES WINCH BUNDLE 183MTRS 5MM ROPE/CHAIN RRP $2245

WINCH BUNDLES:

VIPER S SERIES GRAVITY FEED 1000 ELECTRIC DRUM ANCHOR WINCH VIPER S SERIES STAINLESS STEEL WORM DRIVE MARINE GEARBOX

SUPPLIED WITH 1 MTR 3 B&S POWER LEADS & JOINING CONNECTORS PRESSURE TESTED & SEALED

30072-6SINCLUDED IN THE VIPER “S” SERIES GRAVITY FEED 1000 BUNDLE:

3003290MTRS OF 6MM DOUBLE BRAID ROPESPLICED TO 8 MTRS OF 6MM GALVANISED SHORT LINK ANCHOR CHAIN


ELITE SERIES STAINLESS STEEL UP/DOWN SWITCHES 90109100 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30046

30021-A 30036 30036G 30023 30006 30016 30034 3003530061 30073

OPTIONS:ALLOY FITMENT KIT FOR ALUMINIUM BOAT INSTALLATIONS RRP BLACK 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN RRP FLURO GREEN 10MTRS OF CHAIN SOCK TO SUIT 6MM SHORT LINK ANCHOR CHAIN RRP 316 S/S CAST HAWSE PIPE FOR TRICKY INSTALLATIONS RRP SINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHING RRP DELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING RRP CUSTOM MADE MARINE WIRING LOOM BOATS UPTO 6MTRS RRP CUSTOM MADE MARINE WIRING LOOM BOATS UPTO 8MTRS RRP

$35$39$39

$139$239$329$259$299

90109 30001

30046

30020

3000930032

PACKAGING:WINCH BOX: 46 X 45 X 35 CM 23KGROPE KIT: 27 X 27 X 25 CM 9KG

Viper s SERIES ‘GRAVITY FEED’ 1000 ANCHOR WINCH BUNDLEThe All New Free Fall Setting New Standards In Anchoring!30072-S

CUSTOM MADE WIRING LOOM MADE TO YOUR SPECIFICATIONS SUIT ANY LENGTH BOAT OPTIONAL WIRELESS REMOTE CONTROL FOR VIPER WINCHES - 30 METRE RANGE RRP $ 39

POARRP

138MtrsPer Minute

Fall Rate

265mm

290mm

34mm

430mm

120mm

360mm237mm

80mm

120mm

Patent Pending

E. & O. E.


4E & O E


The Pro Series II 1500W series anchor winch is the most powerful in our range and is designed for commercial and large vessel installa-tions from 8mtrs plus. The 1500 has a huge rope capacity of up to 200mtrs of 6mm double braid or 100mtrs of 8mm triple strand rope spliced to 10mtrs of 8mm short link chain making anchoring in deep water a breeze, and is powerful enough to haul up a 37lb plough anchor all day. The Viper 1500/2500 is also our fastest power up/down drum winch, with a fall rate of 55mtrs per minute, includes our famous 5 year Viper warranty. Now available in a 2500w 24V version. If you take your boating seriously or have a commercial application then you can’t go past the Viper Pro Series II 1500! Take the Viper challenge today and join the thousands of satisfied customers.


Dependable, Fast & Built To Last!Dependable, Fast & Built To Last!


Page 4

55MtrsPer Minute

Fall Rate

5YEAR

WARRANTY

*INCLUDED at no Extra Cost*


HARDWARE IS SUPPLIED!

1500W BUNDLE INCLUSIONS

5MM STAINLESS STEEL SANDWICH PLATE ALL FIXING HARDWARE

INSTALLATION NOTES & WIRING DIAGRAMMAX FALL RATE: 55MTRS PER MINUTE

MAX RETRIEVAL RATE: 46MTRS PER MINUTESUIT VESSEL LENGTH: 8 MTRS +

MAX LOAD: 360KGSWEIGHT: 28KGS

PACKAGING:1500 DRUM & HOUSING 53 X 38 X 39CM 21KG1500 WINCH MOTOR 50 X 23 X 27CM 13KGROPE AND CHAIN KIT 32 X 32 X 34CM 20KG

30003-6 VIPER PRO SERIES 1500 WINCH BUNDLE 200M D/BRAID ROPE KIT RRP $179930003-8 VIPER PRO SERIES 1500 WINCH BUNDLE 100M 3 STRAND ROPE KIT RRP $174930004-6 VIPER PRO SERIES 2500 24V BUNDLE 200M D/BRAID ROPE KIT RRP $189930004-8 VIPER PRO SERIES 2500 24V BUNDLE 100M 3 STRAND ROPE KIT RRP $1849

More Power, More Speed & More Torque

RRP $ 39 RRP $ 49

RRP $336 RRP $239

RRP $395 RRP $399

RRP $39

30003-A 3003730031 300063000730060

ALLOY FITMENT KIT FOR ALL ALUMINIUM BOAT INSTALLATIONS12MTRS OF CHAIN SOCK TO SUIT 8MM SHORT LINK CHAINLARGE HAWSE PIPE FOR TRICKY INSTALLATIONSSINGLE ROLLER VIPER BOW ROLLER SELF-LAUNCHINGDELUXE 3 ROLLER VIPER BOW ROLLER- SELF LAUNCHING - LARGECUSTOM MADE MARINE WIRING LOOM FOR 1500 WINCH FOR BOATS UP TO 9MTRS

30026 30002 30024

3004690021 30019

30051 30052

OPTIONS:

WINCH BUNDLES:

30003VIPER PRO SERIES II 1500 ANCHOR WINCH SUPPLIED WITH 1 MTR 3 B&S POWER LEADS & JOINING CONNECTORS

100MTRS OF 8MM 3 STRAND PREMIUM ROPE SPLICED TO 10 MTRS OF 8MM GALVANISED SHORT LINK ANCHOR CHAIN

30026

VIPER PRO SERIES ANCHOR SWIVEL LARGE 3001930002VIPER DELUXE ANCHOR ROLLER LARGE

400AMP REVERSING SOLENOID 30024LED ILLUMINATED MARINE ROCKER SWITCH 90021

VIPER LASER ETCHED LED ILLUMINATED SWITCH COVER 90046135 AMP FLUSH MOUNT CIRCUIT BREAKER WITH RUBBER SEAL 30025

SINGLE LED SWITCH STAINLESS STEEL FACE PLATE 30051COMBO LED SWITCH & CIRCUIT BREAKER S/S FACE PLATE 30052

Viper PRO SERIES II 1500/2500 ANCHOR WINCH BUNDLEDesigned for Larger Vessels & Commercial Applications30003

PART NO.




30073 WIRELESS REMOTE CONTROL 30M


Page 5

PRO SERIES ANCHOR WINCH ACCESSORIESViper Designed and Built By Bell Marine

Viper PRO SERIES DELUXE STAINLESS STEEL BOW ROLLERS

Gone are the days when you had to make your own bow sprit to hold your anchor. These deluxe 5mm plate stainless steel deluxe bow roller/sprits are your answer, they are guaranteed to keep your anchor secure and away from the bow of your boat. Normally these bow rollers are only found on high end European boats, but now you can add that custom look to any vessel. They include 3 high performance neoprene rollers, anchor stops, rope hoop, mounting holes and stainless steel installation bolts. Designed to fit most anchors and to self-launch every time. Each bow roller is hand made and hand polished to a mirror finish!

Viper PRO SERIES DELUXE SINGLE ROLLER STAINLESS STEEL BOW ROLLER

Suitable for almost any design of anchor, this bow roller is perfect for boats that require a longer bow roller to keep your anchor away from your bow. The single roller reduces rope chafe, allows for free falling and correct alignment upon retrieval. Constructed from 5mm plate 316 marine grade stainless steel, hand polished to a mirror finish and guaranteed to self launch every time.Includes rope hoop, neoprene roller, mounting holes and stainless steel installation bolts.

MOUNTING AREA 300 X 85MM - (4 X 8MM S/S BOLTS, WASHERS & NYLOC NUTS SUPPLIED))P/N 30006 DELUXE SINGLE ROLLER BOW ROLLER RRP $239

When you just can’t use an anchor roller, if you have a separate anchor well, or perhaps you don’t want to cut up your anchor well hatch? These hand polished marine grade 316 stainless steel hawse pipes are perfect for cuddy cabs, centre consoles or bow riders with very small anchor wells. Simply fit your winch either in the cabin or below the deck anywhere there is room and using the Viper hawse pipe you simply bring your rope and chain straight up through your deck and out to your bow roller - match it up with our chain sock for smooth silent winching!

Viper PRO SERIES STAINLESS STEEL HAWSE PIPES

P/N 30016 DELUXE BOW ROLLER - SMALL RRP $329 MOUNTING AREA 210 X 70MM - (4 X 8MM S/S BOLTS, WASHERS & NYLOC NUTS SUPPLIED)

P/N 30007 DELUXE BOW ROLLER - LARGE RRP $395 MOUNTING AREA 300 X 95MM - (6 X 8MM S/S BOLTS, WASHERS & NYLOC NUTS SUPPLIED)

30016 - W72 X L370 X H210mm30007 - W95 X L500 X H260mm

W85 X L510 X H190mm

30031 LARGEOpening W195 X H100mmFlange W220 X D120mmCut Out W190 X 85mmOverall Height 130mm

NEW!

Stop your rope and chain from damaging your deck and ensure the smooth operation of your anchor winch with these deluxe 5mm plate marine grade 316 stainless steel anchor rollers. Hand polished to a mirror finish and include our high performance nylon rollers. Best suited for fitment at the edge of your anchor well when installing your electric drum winch.

Viper PRO SERIES DELUXE STAINLESS STEEL ANCHOR ROLLERS

PRO TIP: Pair with a Viper Chain Sock for some seriously silent running! L205 X H105 X D50mm

L130 X H105 X D50mm

P/N 30023 DELUXE HAWSE PIPE - SMALL NEW! RRP $139 H75 X W153 X D90MM

P/N 30031 DELUXE HAWSE PIPE - LARGE RRP $336 H130 X W220 X D120MM

P/N 30009 DELUXE ANCHOR ROLLER - SMALL RRP $129 L130 X H105 X D50MM

P/N 30002 DELUXE ANCHOR ROLLER - LARGE RRP $186 L205 X H105 X D50MM

Bell Marine deluxe anchor swivels are normally attached between your chain and anchor, reducing the chance of your rope and chain getting twisted and your anchor spinning on the way up and damaging your hull. The 316 stainless steel joint allows for perfect transition through your anchor rollers with no risk of damage to any components on your boat - rated to 200kgs/440lbs.

P/N 30001 DELUXE ANCHOR SWIVEL - SMALL SUITS 6-8MM CHAIN RRP $40P/N 30019 DELUXE ANCHOR SWIVEL - LARGE SUITS 8-12MM CHAIN RRP $75

Viper PRO SERIES DELUXE ANCHOR SWIVELS30001 - L120 x Dia 28mm, 6 & 8mm Chain

30019 - L160 x Dia 28mm, 8 to 12mm Chain

19mmAnchorShaft

15mmAnchorShaft

30023 - SMALLOpening W90 x 55mm Flange W158 X D97mmCut Out W120 X 65mmOverall Height 78mm


6E & O E


Combines switching and circuit breaker function all in one. Compact in size, designed to be surface mounted and protects high amperage circuits at virtually any location. Ideal for windlass, bow thrusters, winches and any high power feeds to distribution panels etc. Supplied with a flush mount rubber seal.

Viper WATERPROOF 80, 100 & 135 AMP CIRCUIT BREAKERS

P/N 30018 80 AMP FLUSH MOUNT CIRCUIT BREAKER INC RUBBER SEAL RRP $ 45P/N 30046 100 AMP FLUSH MOUNT CIRCUIT BREAKER INC RUBBER SEAL RRP $ 45P/N 30025 135 AMP FLUSH MOUNT CIRCUIT BREAKER INC RUBBER SEAL RRP $ 45

Viper PRO SERIES UP/DOWN LED SWITCH & FACE PLATE

This illuminated red LED anchor rocker switch includes our own hand polished stainless steel face plate and is labelled up/down. Momentary ON/OFF/ON, 12v 20 Amp and includes anchor symbol LED indicator, flush mount - W 6cm x H 8cm

P/N 30017 LED ANCHOR SWITCH PLUS S/S FACE PLATE RRP $ 29P/N 30039 LED ANCHOR SWITCH PLUS ALLOY FACE PLATE RRP $ 29

Viper PRO SERIES UP/DOWN LED SWITCH & 100A CIRCUIT BREAKER + FACE PLATE

Combo LED illuminated up/down switch and 100Amp circuit breaker conveniently mounted into our hand polished 316 marine grade stainless steel face plate and includes all fixing hardware.

P/N 30050 LED SWITCH, 100A CIRCUIT BREAKER + S/S FACE PLATE RRP $ 79P/N 30069 LED SWITCH, 100A CIRCUIT BREAKER + ALLOY FACE PLATE - NEW! RRP $ 79

Viper THE ORIGINAL AND THE BEST AUST MADE CHAIN SOCK

STOP THE CHAIN CLANG NOW!

The Viper chain sock is a high tech polyester blend braid that encases your 6 or 8mm short link anchor chain and is the only Australian made chain guard available. How many times have you pulled up your anchor and the chain scraped your gunnel or deck? Do you fish in shallow water for species such as whiting, bream or bass?Do you have a drum winch installed on your boat?Do you have an alloy boat?If you answered yes to any of the above questions then you need a Viper Chain Sock! Protect your boat’s anchor rollers, bow sprit, winch, gel-coat, gunnel and reduce spooking the fish while anchoring which increases your chances of landing fish...............so order now!

P/N 30053 P/N 30053G P/N 30036 P/N 30036GP/N 30036A P/N 30037P/N 30037A

When only the best will do! Hand polished to a mirror finish these switch and combo face plates add that touch of class to your dash. Made from the highest grade 316 marine grade stainless steel & include fixing screws.

Viper PRO SERIES STAINLESS STEEL FLUSH MOUNT FACE PLATES

P/N 30051 S/S FACE PLATE FOR LED SWITCH RRP $ 20P/N 30052 S/S COMBO FACE PLATE FOR LED SWITCH & CIRCUIT BREAKER RRP $ 25P/N 30070 ALUMINIUM FACE PLATE FOR LED SWITCH RRP $ 20P/N 30071 ALUMINIUM COMBO FACE PLATE FOR LED SWITCH & CIRCUIT BREAKER RRP $ 25

RRP $ 34RRP $ 34RRP $ 39RRP $ 39

RRP $ 49

BLACK CHAIN SOCK TO SUIT 6MM SHORT LINK CHAINFLUORO GREEN CHAIN SOCK TO SUIT 6MM SHORT LINK CHAINBLACK CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN FLUORO GREEN CHAIN SOCK TO SUIT 6MM SHORT LINK CHAINBLACK CHAIN SOCK TO SUIT 6MM SHORT LINK CHAIN - 100MTR ROLLBLACK CHAIN SOCK TO SUIT 8MM SHORT LINK CHAINBLACK CHAIN SOCK TO SUIT 8MM SHORT LINK CHAIN - 100MTR ROLL

8MTRS10MTRS10MTRS

12MTRS100MTRS

H80 X W100mm

H80 X W100mm

Note: 30053, 30053G, 30036 & 30036G are designed for 6mm shortlink anchor chain. 30037 is designed for 8mm shortlink anchor chain. Recommended you buy 1-2m longer then your chain to fit correctly

PRO SERIES ANCHOR WINCH ACCESSORIESViper Designed and Built By Bell Marine

8MTRS

100MTRS RRP $POA

RRP $POA




H80 X W60mm

H80 X W60mm


Page 7

Designed by Bell Marine to suit most bow rollers and a must for electric winch installations, these ploughs are designed to hold bottom in any weather conditions and will not damage your bow roller on retrieval which also prevents damage to your rope. You won’t need to go up to the bow of your boat and kick your anchor off, these plough anchors self-launch each and every time and now come with a stainless steel D-shackle with a countersunk allen key S/S bolt. Also available in highly polished stainless steel for that extra bling!

“Don’t forget to add a Viper AnchorSwivel” P/N 30001 & 30019

As the production of alloy boats increases, more and more winches are being fitted to aluminium run abouts and Pro Series boats. The biggest problem with fitting a full stainless steel winch or any stainless fitting to an aluminum boat is the reaction between the 2 different metals in a salt water environment causing electrolysis. Our factory designed fitment kit makes it a breeze to install to and Aluminium boat, it saves the mess of silicon everywhere, it saves time, and saves you money.

The Alloy fitment kit includes 2 specially designed plastic winch sandwich plates, anchor roller insulation plate, insulation spacers for each bolt and even includes an aluminium switch face plate.

P/N 30038-A ALUMINIUM FITMENT KIT TO SUIT VIPER S SERIES 1000 MICRO WINCH RRP $ 30P/N 30021-A ALUMINIUM FITMENT KIT TO SUIT VIPER S SERIES 1000 RAPID WINCH RRP $ 35P/N 30003-A ALUMINIUM FITMENT KIT TO SUIT VIPER PRO SERIES II 1500/2500 WINCH RRP $ 39

PRO SERIES ANCHOR WINCH ACCESSORIESViperDesigned and Built By Bell Marine

Viper PRO SERIES GALVANISED PLOUGH ANCHORS

Viper PRO SERIES STAINLESS STEEL ANCHOR/DECK ROLLERS

Viper PRO SERIES ALLOY BOAT FITMENT KIT

Viper PRO SERIES GALVANISED & STAINLESS STEEL PLOUGH ANCHORS

Viper PRO SERIES WIRELESS WINCH REMOTE CONTROL

Viper PRO SERIES ALLOY BOAT FITMENT KIT

Highly recomended for every aluminium boat!!

Shaft Length

5kg - 450mm

7kg - 500mm

9kg - 630mm

Viper MARINE GRADE REVERSING SOLENOIDS

These 12V marine grade reversing solenoids have the grunt to power Viper 800/1000 & 1500 winches and can be used for many other applications. Designed for marine applications.3 switch connectors and 4 power terminals.

P/N 30020 200 AMP REVERSING SOLENOID RRP $ 55P/N 30024 400 AMP REVERSING SOLENOID RRP $ 89


8E & O E


P/N 30015 GALVANISED PLOUGH ANCHOR - 10LB / 5KG RRP $66P/N 30011 GALVANISED PLOUGH ANCHOR - 15LB / 7KG RRP $88P/N 30012 GALVANISED PLOUGH ANCHOR - 20LB / 9KG RRP $99P/N 30028 GALVANISED PLOUGH ANCHOR - 27LB / 12KG RRP $149P/N 30029 GALVANISED PLOUGH ANCHOR - 35LB / 16KG RRP $189P/N 30013 POLISHED STAINLESS STEEL PLOUGH ANCHOR - 10LB / 5KG RRP $379P/N 30014 POLISHED STAINLESS STEEL PLOUGH ANCHOR - 15LB / 7KG RRP $429P/N 30030 POLISHED STAINLESS STEEL PLOUGH ANCHOR - 20LB / 9KG RRP $499

P/N 30073 VIPER WIRELESS REMOTE CONTROL SUITS ANY BRAND WINCH RRP $ 39

By popular demand the Viper remote control gives you the freedom to move around your boat while having full control of your winch at all times with this small hand held device. With a 30 metre range, If you need to reposition your boat, or even whilst fighting a fish, simply press the up or down button at any time to move forward or back without have to start your engine. Comes complete with installation and operation instructions and can be retro fitted to all brands of winches.


Page 7

PRO SERIES ANCHOR WINCH ACCESSORIESViperDesigned and Built By Bell Marine

All our Viper rope and chain kits have been selected for their quality, blend and performance attributes and are best suited for drum winches. Viper 3 strand, double braid & UHMWPE Spectra ropes are a blend of the world’s finest strands and will ensure they lay perfectly onto your drum winch. Ropes are tested for breaking strain in-house and with the right care will last for many many years. Rope kits are pre-spliced and the chain is wound onto the drums first so installation on to your drum winch is a breeze! Don’t forget to add a chain sock to protect your boat’s gelcoat, for absolutely silent anchor winch operation and your chain also won’t spook the fish for miles around when it goes over your bow roller!

6mm Double Braid Premium Blend Anchor Rope Kits

P/N 30010 75MTRS 8MM SPLICED TO 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN 83MTRS 1000KG BREAKING STRAIN

8mm 3 Strand Premium Blend Anchor Rope Kits

100% 12 Plait UNMWPE Fibre with Polyeurethane Coating Anchor Rope Kits

Short Link Galvanized Anchor Chain

RRP $159

RRP $219

RRP $139

RRP $185

RRP $368

RRP $175

RRP $295

RRP $395

RRP $ 8RRP $ 12

P/N 30055 6MM SHORTLINK HOT DIPPED GALVANISED ANCHOR CHAIN - SOLD PER METRE P/N 30058 8MM SHORTLINK HOT DIPPED GALVANISED ANCHOR CHAIN - SOLD PER METRE

P/N 30056 100MTRS OF 4MM HI SPEC 3000 ROPE SPLICED TO A 3 STRAND 10MTR SHOCK CORD PLUS 6MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN - 116MTRS -1550KG B/STRAIN

CORD PLUS 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN - 183MTRS - 2050KG B/STRAIN

P/N 30027 200MTRS OF 6MM SPLICED TO 10MTRS OF 8MM SHORT LINK GAL ANCHOR CHAIN 210MTRS 1000KG BREAKING STRAIN




P/N 30059 165MTRS OF 5MM HI SPEC 3000 ROPE SPLICED TO A 3 STRAND 10MTR SHOCK P/N 30057 200MTRS OF 5MM HI SPEC 3000 ROPE SPLICED TO A 3 STRAND 10MTR SHOCK CORD PLUS 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN - 218MTRS - 2050KG B/STRAIN

Viper PRO SERIES ROPE AND CHAIN KITS

Viper MARINE GRADE TINNED COPPER WINCH LOOMS 3 B&S CABLE

Bell Marine custom wiring looms are individually hand made and fully tested to suit most boats. We only used the highest grade tinned copper wire (3B&S), silicon impregnated heat shrink, tinned copper marine lugs and every connection is clearly labeled making it a breeze to fit your winch. Simply connect A to A and B to B and you dont even have to refer to your installation instructions.

P/N 30034 VIPER MARINE WINCH LOOM TO SUIT BOATS UP TO 6MTRS FOR (MICRO/RAPID WINCHES)

P/N 30035 VIPER MARINE WINCH LOOM TO SUIT BOATS UP TO 8MTS FOR (MICRO/RAPID WINCHES)

P/N 30060 VIPER CUSTOM MARINE WINCH LOOM FOR VIPER 1500/2500 WINCH (LOOM FORM REQUIRED)

P/N 30061 VIPER CUSTOM MARINE WINCH LOOM FOR ALL OF THE 1000W WINCHES (LOOM FORM REQUIRED)

P/N 90043 BLACK 3B&S TINNED COPPER CABLE - 25MM2 - SOLD PER METRE P/N 90044 RED 3B&S TINNED COPPER CABLE - 25MM2 - SOLD PER METRE RRP $ 14

RRP $ 14

Viper MARINE GRADE HEAT SHRINK

Our heavy duty marine grade silicone impregnated heat shrink will ensure that your cabling is watertight and minimises any chance of corrosion or bad connections in your loom.

P/N 90062 RED SILICONE IMPREGNATED HEAT SHRINK - 20MM FOR 3B&S CABLE - SOLD PER METRE P/N 90063 BLACK SILICONE IMPREGNATED HEAT SHRINK - 20MM FOR 3B&S CABLE- SOLD PER METRE

RRP $ 6RRP $ 6

RRP $399

RRP $299

RRP $259Positive Cable Lengths: Negative Cable LengthBattery to Circuit Breaker: 4.5M Battery to Solenoid: 5.5MCircuit Breaker to Solenoid: 1.0M Solenoid to Winch Motor: 2.5M

Positive Cable Lengths: Negative Cable LengthsBattery to Circuit Breaker: 5.8M Battery to Solenoid: 6.8MCircuit Breaker to Solenoid: 1.5M Solenoid to Winch Motor: 3.2M Solenoid To Winch Motor: 3.2M Switch Looms are 1.5M in length

Solenoid To Winch Motor: 2.5M Switch Looms are 1.5M in length




RRP POA

P/N 30032 90MTRS 6MM SPLICED TO 8MTRS OF 6MM SHORT LINK GAL ANCHOR CHAIN98MTRS 1000KG BREAKING STRAIN

RRP $168

E. & O. E.SPECIFICATIONS MAY VARY OR CHANGEWITHOUT FURTHER NOTICE

Page 8

At long last a fibreglass bait board with gel coat top & bottom that you can completely remove when not required! This convenient drop in and lift out deluxe bait board is manufactured from premium fibreglass with a gloss white gel coat finish top and bottom to complement your boat. Our cutting boards are constructed from Australian made high density plastic which is abrasion resistant, whilst still retaining your knife edge and is UV stabilized (replacements available). Included are two (2) integrated cup holders, a large storage/bait compartment, 2 game rated deluxe 30 degree rod holders and a drain plug with 1 metre of reinforced clear drain hose. Two (2) 38mm X 420mm stainless steel baitboard legs, two (2) 38mm stainless steel deck fittings and all required installation hardware are also supplied. Don’t forget about our optional 6 way double wire or half tube rod rack (P/N 10005 / 10018) so you can keep an eye on all your rods from the comfort of your helm chair!

CONSTRUCTION: LEGS & MOUNTS: HINGES: ROD HOLDERS WASTE: STORAGE: CUTTING BOARD: ROD RACK: DIMENSIONS: WEIGHT:

Our convenient drop in and lift out removable deluxe stainless steel bait board is manufactured from 316 marine grade stainless steel. Complement your boat’s other stainless steel fittings, with our hand polished mirror finish bait board. Cutting surface is resistant to abrasions whilst retaining your knife edge. Features include 2 stainless steel rod holders with plastic end caps to protect your rods, and a large stainless steel bait/storage compartment under the cutting board. Also included are 2 x 38mm x 420mm length legs and fittings. Compact in size and completely removable when not in use, it’s the ideal fisher-man's companion. The new improved Viper version allows you to attach the legs on the bait board in almost any position so it can be fitted into your desired location. Now with perforated s/s splash back to stop your knifes and bait from going overboard.

BAIT BOARD: MARINE GRADE STAINLESS STEEL FULLY WELDED - HAND POLISHEDLEGS AND MOUNTS: 38MM X 420MM 316 MARINE GRADE STAINLESS STEELROD HOLDERS: 51MM STAINLESS STEEL ROD HOLDERS WITH RUBBER CAPSSTORAGE: BAIT/STORAGE COMPARTMENT W 450 X D 100MM X H 100MMCUTTING BOARD: W 470MM X L 330MMDIMENSIONS: W 620MM X D 380MM X H 250MM WEIGHT: 11KG

P/N 50002 REMOVABLE STAINLESS STEEL BAIT BOARD RRP $ 499

P/N 50001 DELUXE FIBREGLASS REMOVABLE BAIT BOARD RRP $ 695 P/N 50003 COMBO REMOVABLE BAIT BOARD + 6 WAY ROD RACK RRP $ 895 P/N 50004 STAINLESS STEEL TOWEL RAIL RRP $ 27 P/N 50005 REMOVABLE BAIT BOARD LEGS & FITTINGS RRP $ 189 P/N 50010 38MM FEMALE DECK FITTINGS (SOLD IN PAIRS) RRP $ 129 P/N 10005 DOUBLE WIRE 6 WAY STAINLESS STEEL ROD RACK RRP $ 245 P/N 10018 HALF TUBE 6 WAY STAINLESS STEEL ROD RACK RRP $ 299

PRO SERIES REMOVABLE BAIT/SERVING STATIONSViperDesigned and Built By Bell Marine

Viper PRO SERIES DELUXE FIBREGLASS REMOVABLE BAIT BOARD

Viper PRO SERIES DELUXE STAINLESS STEEL REMOVABLE BAIT BOARD

SPECIFICATIONS:

TWIN SKIN FIBREGLASS WITH GEL COAT TOP & BOTTOM, HAND CUT AND POLISHED38MM X 420MM 316 MARINE GRADE STAINLESS STEEL LEGS2 X 25MM 316 MARINE GRADE STAINLESS STEEL2 X GAME RATED 30 DEGREE ROD HOLDERS INC RUBBER SLEEVES & CAPSPLASTIC SKIN FITTING, S/S HOSE CLAMP & 30MM X 1MTR REINFORCED CLEAR DRAIN HOSEBAIT/STORAGE COMPARTMENT W 440 X L 300MM X D 90MMNON ABRASIVE HIGH DENSITY PLASTICOPTIONAL - 6 WAY DOUBLE WIRE 316 MARINE GRADE STAINLESS STEEL 30MM TUBEW 850MM X D 450MM X H 100MM W 920MM X D 520MM X H 270MM19KG

SPECIFICATIONS:

1000mm

380mm

PACKAGING:

PACKAGING: W 920MM X D 520MM X H 270MM

50004

50010

10005

NEW!Made using 32mm 316 S/Stube with welded ends!

(no more plastic end caps)

“Included withevery bait board”

“Inclu

ded w

ith ev

ery b

ait bo

ard”


10E & O E


Optional Slimline Towel Rail

SEAT BASES & TACKLE BOXESViperDesigned and Built By Bell Marine

P/N 80022 STAINLESS STEEL TACKLE LOCKER INC 7 TACKLE BOXES RRP $ 699

Our Viper flush mount marine grade 316 stainless steel tackle locker is 100% seam welded, linished and hand polished to a mirror finish and ideal for storing your tackle such as lures, sinker, hooks, knifes etc keeping your deck free of any hazards. Comes complete with 7 plastic tackle boxes with dividers which you can set up as per your requirements. They can be reversed so door can open left or right and comes with stainless steel pull handle & key-lock.Now by popular demand we have also manufactured a matching stainless lockable hatch or compartment door. Add the S/S hatch to the side of your boat or into the second seat base for extra storage space. Cut Out Dimensions: W 385MM X H 295MM

The ultimate seating combo/storage for your boat. Includes the Famous Viper Pro Series deluxe fiberglass seat base and the top of the range stainless steel tackle locker with 7 different compartments. Simply add your seat or swivel seat base and you should be sitting at right comfortable height to take control of the helm and have your worldly belongings locked away under your seat! Don't forget the matching S/S storage hatch P/N 80028 for life jackets, safety gear or valuables anywhere you have room or under your second seat base! Insist on Viper for your boat for that ultimate in bling and it’s built to last the test of time!

Packaging: 52 x 52 x 52cm - 19kgs

420MM

330MM

265MM

490MM

480MM

485MM

P/N 80023 VIPER PRO SERIES COMBO SEAT BASE & STAINLESS STEEL TACKLE LOCKER RRP $ 995

P/N 80021 VIPER PRO SERIES DELUXE FIBERGLASS SEAT BASE RRP $ 399

NEW!MatchingS/S Hatch

Constructed from the high grade fiberglass and finished in gloss white gel coat to match your boat perfectly, these bases bolt directly to your floor and have a solid top ready to bolt your seat base or swivel base directly to. Each seat base is individually hand cut and polished, to ensure the highest gloss white gel coat finish available, and will compliment your boat - Take the Viper challenge today!

Packaging: 52 x 52 x 52cm - 9kgs

Viper PRO SERIES STAINLESS STEEL TACKLE STORAGE LOCKER

Viper PRO SERIES COMBO SEAT BASE S/S TACKLE STORAGE LOCKER

Viper PRO SERIES DELUXE FIBERGLASS SEAT BASE

Viper PRO SERIES STAINLESS STEEL FLUSH MOUNT ACCESS HATCH

P/N 80028 STAINLESS STEEL FLUSH MOUNT ACCESS HATCH - SUITS 80022 RRP $ 329

At long last a stainless steel storage hatch that is fully welded, hand polished to a mirror �nish and is reversible so it opens to the left or right hand side. Take advantage of the space in your boat for storage in your cabin, cockpit or �shing area and it matches our tackle locker #80022. Hand made from 316 marine grade stainless steel to give your that custom look and it will last the test of time. Also includes lock, 2 keys and all the hardware to install it. Ideal for life jacket storage and much much more!

Dimensions: W 420mm H 330mm

Cut Out Size: W 380mm H 290mm

Included!

Included!




NEWVERSION!

NOW

IN M

ATTE

BLA

CK

TELESCOPIC 3 STAGE OUTRIGGER POLES WITH SPRING LOADED S/S LOCKING PINS180 DEGREE ROTATION BOW TO STERN

90 DEGREE VERTICAL POSITIONING UP/DOWN8MM CAST 316 STAINLESS STEEL HAND POLISHED BASES

SPRING LOADED STAINLESS LOCKING PINSMATTE BLACK UV STABILIZED 3 STAGE POLES

4.876 METERS (16FT) EXTENDED, 2 METERS (6.5 FT) RETRACTEDLINES, CLIPS & PULLEYS INC

PAIR OF TAG RETURN WEIGHTSSANDWICH PLATES AND FIXING HARDWARE

TAKES 41MM POLES88MM DIA BASE

51MM DIA CUT OUT5 YEAR WARRANTY

REMOVABLE TELESCOPIC OUTRIGGERS & ACCESSORIESDesigned and Built By Bell Marine

REMOVABLE 3 STAGE TELESCOPIC OUTRIGGER BUNDLE

Viper Xtreme Outriggers just got better with our new Xtreme Series, improvements making them bullet-proof! Viper Outrigger bases are now fitted with heavy-duty commercial stainless steel bearings to ensure smooth operation in any weather condition. Our new Xtreme outrigger poles are also spring loaded for ease of use.

With 180 degree rotation bow to stern, 90 degree vertical adjustment with improved heavy duty spring-loaded stainless steel locking pins, there is no need to remove your poles and align splines to set your outriggers into position!

The new Viper Extreme Series Outriggers are removable when not in use and the collapsible telescopic poles make for easy storage, and are also rated to handle the tough game applications. They can be deck, cabin, hard top or side mounted onto your rocket launcher and are fully adjustable without having to fight spline alignment - just lift the spring loaded stainless steel pins. The bases are constructed from 316 marine grade cast stainless steel.

80001

80014

80009

800278001580008

80010

80026

These Viper Shot Gun/Outrigger bases are constructed from 316 marine grade stainless steel and are designed for ease of use, less moving parts, making them a set and forget type of base. These bases swivel 360 degrees plus multiple vertical settings which enables a multitude of mounting options to get the perfect trolling height and angle for your poles.

The mounting plate is permanently bolted to the deck or cabin top of your boat using 4 bolts, and with 2 different ID sizes, these bases should suit nearly all Shot Gun/Outrigger poles on the market.

Viper SHOT GUN/OUTRIGGER BASES

8000480003 80005

Now with spring-loadedS/S locking pins!

XtremeoUTRIGGERS

by BELL MARINE

VIPER

XtremeoUTRIGGERS

by BELL MARINE

VIPER

Included witheach bundle!

P/N 80002 DECK MOUNT REMOVABLE TELESCOPIC OUTRIGGER BUNDLE (PAIR) RRP $1599P/N 80013 SIDE MOUNT TELESCOPIC OUTRIGGER BUNDLE (PAIR) RRP $1599P/N 80014 SIDE MOUNT OUTRIGGER BASES WITH MOUNTING HARDWARE (PAIR) RRP $ 799P/N 80015 OUTRIGGER BUNGEE CORDS INC S/S PULLEYS AND CLIPS (PAIR) RRP $ 49P/N 80001 REMOVABLE DECK MOUNT BASES WITH MOUNTING HARDWARE (PAIR) RRP $ 799P/N 80008 TAG RETURN WEIGHTS (SOLD IN PAIRS) RRP $ 49P/N 80010 OUTRIGGER LINE KIT - (LINES, BUNGEE CORDS & QUICK RELEASE CLIPS) RRP $ 99P/N 80009 TELESCOPIC OUTRIGGER POLES ONLY (PAIR) RRP $ 599P/N 80026 QUICK RELEASE ADJUSTABLE TENSION LINE CLIPS (PAIRS) RRP $ 26P/N 80027 DECK FITTING FOR OUTRIGGER BASES WITH WEATHER PROOF CAPS RRP $ 159

P/N 80003 DECK MOUNT MULTI DIRECTIONAL SHOT GUN/OUTRIGGER BASE (40mm ID) - SOLD EACH RRP $ 99 P/N 80004 RAIL MOUNT MULTI DIRECTIONAL SHOT GUN BASE (43mm ID) - SOLD EACH RRP $ 99P/N 80005 DECK MOUNT TRI POSTION SHOT GUN/OUTRIGGER BASE (43mm ID) - SOLD EACH RRP $ 99


12E & O E


P/N 10001 DELUXE GAME RATED 316 STAINLESS STEEL ROD HOLDERS 30° RRP $69P/N 10008 DELUXE GAME RATED 316 STAINLESS STEEL ROD HOLDER 0° RRP $69

Available in 0 & 30 degrees these heavy duty cast 316 marine grade stainless steel game rated rod holders are fully welded, hand polished to a mirror finish and are strong enough to hold your most precious game rods. They have heavy duty gimble pins and solid wall thickness (1.5 x 48mm). The 0 degree version is ideal for your bent butt game rods (as used in the USA) let the boat hold the rod, so you can focus on the fight, rather than breaking your back using a gimble belt! They come with rubber inserts with caps to stop water getting into your boat. Viper 5 Year Warranty

Finally a slimline 316 stainless steel rod holder that is game rated! Laser cut tops from 5mm plate 316 stainless steel, 1.5mm tube wall thickness and fully welded, linished and hand polished to a mirror finish. Includes fully welded heavy duty gimble pins and will complement any boat with a custom look design. 5mm plate available in 0° and 30° versions (15° 3mm) Viper 5 Year Warranty

P/N 10010 DELUXE SLIMLINE GAME RATED ROD HOLDERS 30° RRP $49P/N 10009 DELUXE SLIMLINE GAME RATED ROD HOLDER 15° RRP $39P/N 10011 DELUXE SLIMLINE GAME RATED ROD HOLDER 0° RRP $49

Now available In Single, Double, 4, 6 & 8 Way Versions!Sick of your lines tangling, rods getting damaged, stood on and broken? These deluxe side mount coaming rack rod holders, simply bolt to the side of your boat and no matter how rough it gets your rods & passengers are safe! The Viper deluxe version has rolled bottoms, the mounting bar is 10mm square tube with fully welded gimble pins to stop your rods from spinning and damaging your gelcoat, complete with hardened plastic end caps to protect your rod butts! 5 Year Warranty

Now you can fish any tide, current and any wind with our deluxe multi-directional single rod holders. Fish from any rod holder on your boat including sides, front and rear as these are fully adjustable and available in 2 versions, 1/2 tube and full tube rod holders. They will rotate 3600 and angle 900 up/down to ensure your rods are always in the correct position. Ideal for trawling lures and can be used in the same manner as outrigger poles using your own fishing rods......5 YEAR Warranty. New heavy duty game rated version & now includes a lanyard mounting point

P/N 80006 MULTI DIRECTIONAL FULL TUBE SINGLE ROD HOLDER RRP $ 179 eaP/N 80007 MULTI DIRECTIONAL CAST HALF TUBE SINGLE ROD HOLDER RRP $ 179 ea

P/N 10025 DELUXE SIDE MOUNT COAMING ROD RACK - SINGLE RRP $ 59P/N 10024 DELUXE SIDE MOUNT COAMING ROD RACK - DOUBLE RRP $ 89P/N 10015 DELUXE SIDE MOUNT COAMING ROD RACK - 4 WAY RRP $139P/N 10021 DELUXE SIDE MOUNT COAMING ROD RACK - 6 WAY RRP $169P/N 10031 DELUXE SIDE MOUNT COAMING ROD RACK - 8 WAY - IDEAL FOR THE MAN CAVE RRP $199

PRO SERIES ROD HOLDERSViperDesigned and Built By Bell Marine

Viper PRO SERIES DELUXE GAME RATED 316 S/S ROD HOLDERS

Viper PRO SERIES DELUXE SLIMLINE 316 S/S GAME RATED ROD HOLDERS

Viper PRO SERIES DELUXE 316 S/S SIDE MOUNT COAMING ROD RACK

Viper PRO SERIES MULTI-DIRECTIONAL SINGLE ROD HOLDERS

GAME RATED!

NEW!

NEW!

P/N 10023 VIPER PRO SERIES DIY STAINLESS STEEL ROD HOLDER/CHIMNEY INCLUDING RRP $ 29 ABS PLASTIC END CAP TO PROTECT YOUR RODS (L 250MM X O/D 51MM)

Ever thought about making your own custom rocket launcher, coaming rack, couple of extra rod holders in certain positions, or just want a custom rod rack for the man cave? Well now you can with these thick walled 316 marine grade stainless steel rod holder chimneys, hand polished to a mirror finish, with rolled bottoms, welded gimble pins to stop your rods spinning, and plastic tops to protect your rod butts and reels. They can be either bolted or welded to basically anything without it costing you a fortune in fabrication.

Viper PRO SERIES DIY DELUXE 316 STAINLESS STEEL ROD CHIMNEYS

1 Way - L 110 mm2 Way - L 190 mm4 Way - L 450 mm6 Way - L 710 mm8 Way - L 990 mm

75mm between rod holders

GAME RATED!




Ideal for trolling lures on lakes, rivers & offshore

GAME RATED!

NEW!


Page 10

The easiest DIY corner rod racks to ever hit the market! Now in two versions one is supplied with tapered legs that fit into your existing 300 rod holders at the rear of your boat, and the other version is with straight legs and fittings, which can be located in almost any position. Both version are supplied with 6 legs, 2 or 4 deck fittings and are completely removable when not required. The new version has s/s welded tube ends instead of plastic caps and now with the new slimline rod holders, slightly more narrower to secure your rods. Now you can fish 10 rods, keep an eye on all rods at once and have your family and friends in the boat without tripping over rods and tackle. Each rod holder is a double wire construction to secure your valuable rods and are made from hand polished 316 marine grade stainless steel. Includes both port and starboard sides - installation time approx 60 minutes.

P/N 10030 REMOVABLE UNIVERSAL 10 WAY CORNER ROD HOLDERS WITH STRAIGHT LEGS INC 4 DECK FITTINGS BOTH LEFT AND RIGHT SIDES INCLUDED P/N 10016 REMOVABLE UNIVERSAL 10 WAY CORNER ROD HOLDERS WITH 2 TAPERED LEGS INC 2 DECK FITTINGS BOTH SIDES SUPPLIED P/N 10019 VIPER PRO SERIES 25MM DECK FITTING FOR CORNER ROD HOLDER - EACH RRP $ 32

PRO SERIES ROD HOLDERS & ACCESSORIESViperDesigned and Built By Bell Marine

Viper PRO SERIES REMOVABLE 10-WAY CORNER ROD HOLDERS

RRP $399

RRP $399

550mm 550mm

25mm S/S tube withwelded s/s end caps 250mm

Viper PRO SERIES UNIVERSAL D.I.Y. REMOVABLE 6 WAY ROD RACK

Adjustable DIY 6-way rod rack gives you the flexibility to position the legs anywhere you want along the the 32mm 316 stainless steel horizontal bar, which includes 6 double wire rod holders pre-welded into position. Ideal for a custom fit to an existing bait board, pre-installed rod holders or a tight narrow gunnel, all you have to do is sit the legs into position and mark the top bar and take them into your local fabricator to weld the legs into position. We are happy to weld them into place for you if a local fabricator is not available, please allow 14-21 days.

P/N 10033 CUSTOM WELDING FOR LEGS - DRAWING MUST BE SUPPLIED RRP $90

These are another first by Bell Marine and are the ultimate in multi-directional 3-way rod holders. Viper Pro Series rod holders allow you to fish in any tide, any current, any wind conditions and make your rod holders useable at all times, as you can set the direction by 3600 and angle your rods up and down by 90°! Hand polished to a mirror finish and construct-ed from 32mm tube 316 marine grade stainless steel with fully welded ends, double wire rod holders secure your rods and include a solid cast stainless steel base to lock into your gimble pins. Viper 5 YEAR WARRANTY

P/N 10004T MULTI DIRECTIONAL 3 WAY CAST HALF TUBE ROD HOLDERS (PAIR) RRP $ 499

P/N 10004W MULTI-DIRECTIONAL 3 WAY DOUBLE WIRE ROD HOLDERS (PAIR) RRP $ 399

These are another first by Bell Marine and are the ultimate in multi-directional 3-way rod holders. Viper Pro Series rod holders allow you to fish in any tide, any current, any wind conditions and makes your rod holders useable at all times, as you can set the direction by 360 0 and angle your rods up and down by 90°! Hand polished to a mirror finish and constructed from 32mm 316 marine grade stainless steel tube, fully welded ends, full tube cast rod holders secure your rods and includes solid cast stainless steel base to lock into your gimble pins with our famous Viper 5 YEAR WARRANTY

Viper PRO SERIES MULTI-DIRECTIONAL 3-WAY DOUBLE WIRE ROD HOLDERS

Viper PRO SERIES MULTI-DIRECTIONAL 3-WAY HALF TUBE CAST ROD HOLDERS

NEW!

NEW!

SOLD IN PAIRS

SOLD IN PAIRS

NEW!

P/N 10032 UNIVERSAL D.I.Y. REMOVABLE 6-WAY ROD RACK RRP $249

1120 mm

NEW!Version

Stainless Steel CastBases for added Strength!

Stainless Steel CastBases for added Strength!

Pictured with 300 tapered legfor exisiting rod holders


14E & O E


P/N 10030

P/N 10016

Adjustable Angle

Adjustable Angle

E. & O. E.SPECIFICATIONS MAY VARY OR CHANGEWITHOUT FURTHER NOTICE

Page 5

Bell Marine’s roots are in manufacturing rocket launchers, bow rails, etc for many of the boat builders in Australia. These three piece rocket launchers are fully welded, linished and hand polished to a mirror finish. The 3 piece was developed because of the age old problem that one piece rocket launchers eventually crack at the stress points such as the top bends and where the chimneys attach etc. They are supplied with M8 eye bolts so you can fold down your rocket launcher when required and are pre-drilled for internal wiring. Ships worldwide in a convenient box.

Includes: 5 Mounting brackets for accessories such as flood lights, radio aerials, GPS aerial, etc Constructed from 25mm 316 marine grade stainless steel tube 6 Chimneys with rolled bottoms, gimble pins and plastic tops to protect your rods. Rear grab rails for passenger comfort and safety. M8 eye bolts to collapse your rocket launcher for storage. Bimini mounting rail built-in. Feet, tube ends and fixing hardware supplied.

Rocket Launcher P/N 20008 will fit boats with a windscreen width of between1600mm and 1800mm where the windscreen meets the deck (rear)

Packaging: 179cm X 21cm X 46cm - 17kg

Rocket Launcher P/N 20015 will fit boats with a windscreen width of between1800mm and 2000m where the windscreen meets the deck (rear)

Packaging: 188cm X 21cm X 46cm - 18kg

Rocket Launcher P/N 20016 will fit boats with a windscreen width of between2000mm and 2200m where the windscreen meets the deck (rear)

Pre-drilled for internal wiring for that custom lookPackaging: 198cm X 21cm X 46cm - 19kg

1260mm

P/N 20008 - 1500MM WIDEP/N 20015 - 1700MM WIDEP/N 20016 - 1900MM WIDE

P/N 20008 UNIVERSAL 3 PIECE ROCKET LAUNCHER SMALL (W 1600 - 1800MM) RRP $1299P/N 20015 UNIVERSAL 3 PIECE ROCKET LAUNCHER MEDIUM (W 1800 - 2000MM) RRP $1350P/N 20016 UNIVERSAL 3 PIECE ROCKET LAUNCHER LARGE (W 2000 - 2200MM) RRP $1399

Designed to fit most hard tops, these marine grade 316 stainless steel rocket launchers are fully welded and hand polished to a mirror finish. Includes 6 mounting brackets for all your accessories plus 6 heavy duty rod holders to keep your rods safe and provisions for your internal wiring is included. Add the ultimate bling to your hardtop and run all your wiring internally! Now with new mounting so they fit snug to your hardtop and the legs can be angled to suit your application.

P/N 20007 VIPER PRO SERIES HARDTOP STAINLESS STEEL ROCKET LAUNCHER - 1430MM RRP $ 799P/N 20010 VIPER PRO SERIES HARDTOP STAINLESS STEEL ROCKET LAUNCHER - 1700MM RRP $ 899

UNIVERSAL 3 PIECE STAINLESS STEEL ROCKET LAUNCHERViperDesigned and Built By Bell Marine

Viper PRO SERIES UNIVERSAL 3 PIECE DELUXE ROCKET LAUNCHER

Viper PRO SERIES DELUXE HARDTOP ROCKET LAUNCHER

Packaging: 145CM X 45CM X 17CM - 7KG 180CM X 45CM X 17CM - 18KG

P/N 20007 WIDTH 1430MMP/N 20010 WIDH 1700MM

OUTSIDE OF MOUNTING BRACKETS

P/N 20008 - 1600-1800MM WIDEP/N 20015 - 1800-2000MM WIDEP/N 20016 - 2000-2200MM WIDE

Adjustable Width

Top Width

NOW WITH ADJUSTABLEANGLED LEG MOUNTS!




NEW!SIZE

NEW!MODEL/SIZE


Page 10

Viper PRO SERIES REMOVABLE 10 WAY CORNER ROD HOLDERS

STAINLESS STEEL MARINE CHANDLERY AND ACCESSORIESViperDesigned and Built By Bell Marine

Viper PRO SERIES MARINE GRADE 316 STAINLESS STEEL CHANDLERY

HEAVY DUTY S/S POLISHED HINGES(L95MM X W25MM)

RRP $ 28 Pair


RRP $ 28 Pair


RRP $ 28 Pair


RRP $ 28 Pair

HEAVY DUTY S/S POLISHED BARREL BOLT(L95MM X W40MM)

RRP $ 23

25MM TUBE HINGE & LOCKING PINRRP $ 38

25MM TUBE LATCH - SUITS 70010RRP $ 29

S/S ANTI RATTLE LIFT RING(L65MM X W55MM)

RRP $ 14

S/S ANTI RATTLE LIFT RING(L60MM X W75MM)

RRP $ 16

HEAVY DUTY S/S BOW U-BOLT(L160 X 60 X 12MM)

RRP $ 39

150MM 6” S/S CLEATRRP $ 25

S/S SWIVEL PULLEY UP TO 8MM ROPERRP $ 12

S/S VENT-SMALL(L40MM X W25MM)

RRP $ 4S/S VENT-LARGE(L60MM X 35MM)

RRP $ 6

S/S SPLIT BOLLARD RRP $ 59

S/S SPLIT BOLLARD WITH SPRING LOADED LOCKING PIN RRP $ 69.

RAIL MOUNT S/S WIRE CUP HOLDERRRP $ 39

WALL MOUNT S/S WIRE CUP HOLDERRRP $ 39

FitsCan/Bottle/

Stubbie Holder/Cooler!

S/S CUP HOLDER WITH DRAINCUT OUT DIA 90MMRRP $ 27

FitsCan/Bottle/

Stubbie Holder/Cooler!

S/S CUP HOLDER WITHOUT DRAIN CUT OUT DIA 73MM OD RRP $ 19

300 RUBBER ROD HOLDER INSERT WITH CAPRRP $ 16

00 RUBBER ROD HOLDER INSERT WITH CAPRRP $ 16

PLASTIC 32MM RODHOLDER/TUBE SPACER (41mm OD)

RRP $ 8

51MM PLASTIC END CAPFOR ROD HOLDERSRRP $ 6

PLASTIC 32MM RODTAPERED TUBE SPACERRRP $ 6

7000170002 70003 70004

60007 6000870010 70034

70012

70028

70005

70006

70008

70009

70035

70036

70046

70047

7002470025

70020

70021

70007 70043

40001

70041 70040 70042 70044 70051

40004


RRP $ 28


RRP $ 30

200MM 8” S/S CLEATRRP $ 32

S/S MINI PULLEYUP TO 4MM ROPERRP $ 7

7002238MM SKIN FITTING RRP $ 2919MM SKIN FITTING RRP $ 24

19MM SKIN FITTING90 DEGREE RRP $ 24


16E & O E



Page 10

Viper PRO SERIES REMOVABLE 10 WAY CORNER ROD HOLDERS

MARINE CHANDLERY AND ACCESSORIESViperDesigned and Built By Bell Marine

Viper PRO SERIES MARINE GRADE 316 STAINLESS STEEL CHANDLERY

HEAVY DUTY S/S POLISHED SNAP HOOK

50MM RRP $5 70MM RRP $7

FIXED 25MM TUBE MOUNTING BRACKET 50MM RRP $25

ANGLED DECK FITTING FOR BIMINI + M8 EYE BOLT(78 X 60MM)

RRP $34

25MM RRP $1232MM RRP $16

25MM TUBE END CAPRRP $12

S/S OVAL DECK FITTING FOR BIMINI + M8 EYE BOLT(82 X 55MM)

RRP $34

FLAT DECK FITTIING FOR BIMINI + M8 BOLT(60 X 40MM)

RRP $34

QUICK RELEASE DECK FITTING FOR FOLD DOWN BIMINI + M8 EYE BOLT (60 X 40MM)

RRP $34

D.I.Y. WELD-ON CAST HALFTUBE ROD HOLDERRRP $44

D.I.Y. WELD ON DOUBLE WIRE ROD HOLDERRRP $15

4000240003

7001370011

7002670027

70030 70031 70033 70032

10006 10007 90014 90015STAINLESS STEEL TRANSDUCER COVER - SMALLRRP $45

STAINLESS STEEL TRANSDUCER COVER - LARGERRP $59

60001 STAINLESS STEEL FENDER BASKET SMALL RRP $115

60002 STAINLESS STEEL FENDER BASKET MEDIUM RRP $139

60003 STAINLESS STEEL FENDER BASKET LARGE RRP $169

20006

20001

20002

20003

20004

20009

20005

STAINLESS STEEL GRAB RAIL- 205MM RRP $ 29






STAINLESS STEEL GRAB RAIL- 1425MM RRP $189(includes centre support leg)

DIA 300MM H 530MM

DIA 230MM H 410MM

DIA 190MM H 380MM

70045

STAINLESS STEEL LOCKABLE FUEL CAP

RRP $99

Cast 316 stainless steellockable fuel cap, hand polished to a mirror finish!

Suits either38mm & 50mm

Fuel Hose

angled side forlocating bimini!

TUBE END CAP (REQUIRES WELDING)




Supplied with washers & Nylocs

These berley buckets are height adjustable and removable so you can empty and clean them at the boat ramp before arriving home. Hand made and hand polished, they include our Bell Marine 2-way mounting bracket which lets you attach the bracket to your transom, then check the height to make sure your bucket reaches the water before drilling & attaching the other bracket to your bucket. This way you can avoid obstacles like boarding ladders, transducers & speedos! Includes a Viper 5 YEAR WARRANTY

Dimensions: H 40CM X DIA 15CMPackaging: 48CM X 24CM X 20CM - 3KG

P/N 60012 REMOVABLE TRANSOM MOUNT BERLEY BUCKET RRP $ 215

Our marlin board mount berley bucket is fully height adjustable! The collar which surrounds the berley bucket has no pre drilled holes, so use it as a template for your cut out, then place your bucket through the cut out, make sure your berley bucket reaches your water level , drill 3 fixing holes and bolt it up with the supplied stainless steel bolts, washer and nylocks. Includes a Viper 5 YEAR WARRANTY

Dimensions: H 40CM X DIA 15CMPackaging: 48CM X 24CM X 20CM - 3KG

P/N 60013 HEIGHT ADJUSTABLE MARLIN BOARD MOUNT BERLEY BUCKET RRP $ 199

P/N 60014 D SHAPE TRANSOM MOUNT BERLEY BUCKET RRP $ 169

The D shaped transom mount berley bucket is designed for when space is at a premium but you need to hold fish at the back of your boat. Half the depth of our standard berley bucket and is easily fitted using the 2 supplied stainless steel screws. Still the same Viper quality and finish you would expect and ideal for twin outboard installations as you can sneak them in where your traditional berley bucket just won’t fit. Includes a Viper 5 YEAR WARRANTY

Dimensions: H 40CM X DIA 18.5CMPackaging: 48CM X 24CM X 20CM - 3KG

When only the best will do! These berley munchers are fully welded, linished and polished by hand to give that ultimate bling & durability to match up with your berley bucket. The Viper stainless steel muncher teeth require less physical work to produce a much finer berley and has no problem cutting through frozen pilchards or any fish for that matter. Includes a Viper 5 YEAR WARRANTY

Dimensions: L 175MM X 20MM S/S TUBEPackaging: 180CM X 15CM X 15CM - 1KG

P/N 60015 VIPER PRO SERIES STAINLESS STEEL BERLEY MUNCHER RRP $ 48

One of Australia’s most popular stainless steel berley cage is now supplied with a pellet net to help keep fine berley inside & to slow down the feedout in strong currents, making your berley log last longer and saves you money. Get your berley log to the bottom and our berley cage will distribute your berley evenly and consistently holding the fish at the back of your boat. Available in 2 sizes and now with optional extra 1kg weights, you can’t go past these cages!

Dimensions: H 300MM X DIA 130MM - LARGEH 150MM X DIA 130MM - SMALL

300MM

130MM DIA

P/N 60009 BERLEY CAGE - LARGE RRP $ 42P/N 60011 BERLEY CAGE - SMALL RRP $ 39P/N 60010 EXTRA 1 KG BERLEY WEIGHTS RRP $ 17

Included

NEW!Pellet Net

150MM

130MM DIA

PRO SERIES BERLEY BUCKETS, CAGES & ACCESSORIESViperDesigned and Built By Bell Marine

Viper PRO SERIES REMOVABLE TRANSOM MOUNT BERLEY BUCKET

Viper PRO SERIES STAINLESS STEEL BERLEY CAGE

Viper PRO SERIES STAINLESS STEEL BERLEY MUNCHER

Viper PRO SERIES D-SHAPED TRANSOM MOUNT BERLEY BUCKET

Viper PRO SERIES HEIGHT ADJUSTABLE MARLIN BOARD MOUNT BERLEY BUCKET

Price drop!

Price drop!

Price drop!


18E & O E


Our new range of Elite Series stainless steel switches, are waterproof rated to IP67 and designed for marine use. The Elite Series switch panels are the smallest available, saving you valuable dash space, and can be mounted horizontally or vertically. Faceplates are constructed from 316 marine-grade stainless steel to last the test of time in any application and are hand polished to a mirror finish. These switches are pre-wired and can be adjusted to allow the blue LED light rings to always be on to display as convenient switch back-lighting, or they can wired to come on when you press the switch. Rated at 10AMP 9-24V.Available in: 2, 4, 6 & 8 Gang Panels. Momentary version switch panels arealso available. Custom switch labelling available

On/Off actuation

On/Off momentary actuation

316 stainless steel face plates

Waterproof to IP67

Stainless Steel Switches

Silver alloy contacts

Blue indication LED

Maximum current 10 amps

Small 19mm mounting hole

Voltage 9-24V

Pre wired

12 months warranty

Designed for marine use

Laser Inscribed Labelling

19

15

39mm

22

P/N 90106 & 90107

P/N 90108P/N 90109

Faceplate Dimensions53mm x 85mm

P/N 90110Faceplate Dimensions

53 x 144mm P/N 90112Faceplate Dimensions

80 x 113mm


53 x 203mm


80 x 144mm

SWITCH ONLY ON/OFF RRP $ 25 SWITCH ONLY ON/OFF MOMENTARY RRP $ 25 2 GANG MARINE SWITCH PANEL ON/OFF (62 x 90mm) RRP $1182 GANG MARINE SWITCH PANEL MOMENTARY (62 x 90mm) RRP $1184 GANG MARINE SWITCH PANEL ON/OFF- INLINE (VERTICAL 52 X 142mm) RRP $1684 GANG MARINE SWITCH PANEL ON/OFF- INLINE (HORIZONTAL 52 X 142mm) RRP $1686 GANG MARINE SWITCH PANEL ON/OFF- INLINE (VERTICAL 52 X 203mm) RRP $239 6 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (VERTICAL 80 X 112mm) RRP $2396 GANG MARINE SWITCH PANEL ON/OFF - INLINE (HORIZONTAL 52 X 203mm) RRP $2396 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (HORIZONTAL 80 X 112mm) RRP $2398 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (VERTICAL 80 X 142mm) RRP $2898 GANG MARINE SWITCH PANEL ON/OFF - SIDE BY SIDE (HORIZONTAL 80 X 142mm) RRP $289

P/N 90106 P/N 90107 P/N 90108 P/N 90109 P/N 90110P/N 90127 P/N 90111 P/N 90112P/N 90121 P/N 90128P/N 90113P/N 90120

Our rocker switch panels are vibration, shock, thermo shock, moisture & salt water resistant. Includes hidden circuit breakers, that you can press to reset. Each switch is LED illuminated on/off. Switch panels are constructed from heavy duty ABS plastic, all switch panels are pre-wired & include a rubber seal and mounting screws, retail blister pack 12V or 24V ready.

P/N 90025 4 GANG ON/OFF SWITCH PANEL - 1x5A, 2x10A, 1x15A + 24 LABELS RRP $ 62P/N 90026 6 GANG ON/OFF SWITCH PANEL - 2x5A, 2x10A, 2x15A + 24 LABELS RRP $ 79P/N 90027 8 GANG ON/OFF SWITCH PANEL - 2x5A, 3x10A, 3x15A + 24 LABELS RRP $ 99

Can’t fit standard switch panels? Then make your own with these modular interlocking individual housings & led rocker switches. Use them on their own, or snap them together to make your own panels. Choose two end housings and as many middle housings as you require. Great for those tight spaces or if you are unsure of number of switches needed. Add switches as you add accessories, electronics, lights, pumps etc. Just snap on another switch and it will look like they were factory fitted!

SWITCHES, SWITCH PANELS AND ACCESSORIESViperDesigned and Built By Bell Marine

Viper PRO SERIES PRE-WIRED LED SWITCH PANELS WITH BUILT IN CIRCUIT BREAKERS

Viper PRO SERIES MODULAR LED MARINE SWITCHES

Viper ELITE SLIMLINE SWITCHES AND SLIMLINE SWITCH PANELS

Note: Custom switch branding & labelling is available upon request POA

P/N 90018 ON-OFF LED MARINE ROCKER SWITCH RRP $ 9P/N 90019 ON-OFF MOMENTARY LED MARINE ROCKER SWITCH RRP $ 9P/N 90020 ON-OFF-ON LED MARINE ROCKER SWITCH RRP $ 9P/N 90021 ON-OFF-ON MOMENTARY LED MARINE ROCKER SWITCH RRP $ 9P/N 90022 MODULAR END SWITCH HOUSING (BOTH LEFT OR RIGHT) RRP $ 4P/N 90023 MODULAR MIDDLE SWITCH HOUSING ONLY RRP $ 4P/N 90024 MODULAR STAND ALONE SWITCH HOUSING RRP $ 4P/N 90123 316 STAINLESS STEEL MODULAR SWITCH FACE PLATE - 4 GANG NEW! RRP $19P/N 90124 316 STAINLESS STEEL MODULAR SWITCH FACE PLATE - 6 GANG NEW! RRP $21P/N 90125 316 STAINLESS STEEL MODULAR SWITCH FACE PLATE - 8 GANG NEW! RRP $24

Pictured withswitch housing fitted

900229002390024

Custom Laser Inscribing

Your Logo/LabelPOA

90124

9012590123

W H4 Gang Cut Out - 105 X 90mm Overall Size - 130 X 120mm6 Gang Cut Out - 155 X 90mm Overall Size - 180 X 120mm8 Gang Cut Out - 210 X 90mm Overall Size - 235 X 120mm




INLINE SIDE BY SIDE

Never search for a switch sticker again! Absolutely every sticker you could want and available in 2 sizes, 19mm round or 12mm square and you get both black and white back grounds in each kit. Made from heavy duty vinyl, UV stabilized and designed for harsh conditions.

HT-01A 3 to 30AMP circuit breakers125/250V AC 32V DC 50/60HZ CE approved2 pole

(W28MM X H35MM X D14MM)

Does not include waterproof reset button cover

P/N 90041 3 AMP CIRCUIT BREAKER RRP $ 6P/N 90028 5AMP CIRCUIT BREAKER RRP $ 6P/N 90029 10AMP CIRCUIT BREAKER RRP $ 6P/N 90030 15AMP CIRCUIT BREAKER RRP $ 6P/N 90031 20AMP CIRCUIT BREAKER RRP $ 6P/N 90040 30AMP CIRCUIT BREAKER RRP $ 6P/N 90042 CIRCUIT BREAKER COVER RRP $ 3

Charge your mobile phone, Ipad, Gopro, camera, in fact any USB device using our water proof flush mount dual USB adapter! A must for every boat. Supplied in a retail blister pack. Includes connectors and mounting screws.

P/N 90045 FLUSH MOUNT MARINE USB CHARGER RRP $ 27

P/N 90033 19MM ROUND VINYL MARINE STICKERS UV STABILIZED


Viper HEAVY DUTY VINYL SWITCH STICKER KITS 12MM SQUARE OR 19MM ROUND

Viper MARINE FLUSH MOUNT DUAL USB CHARGER

Viper MARINE CIRCUIT BREAKERS

RRP $ 12

RRP $ 14P/N 90032 12MM SQUARE VINYL MARINE STICKERS UV STABILIZED

Viper PRO SERIES MODULAR LED ILLUMINATED SWITCH COVERS

Individual switch covers enable you can choose the right illuminated cover to suit your switch. Simply snap them into place on the switch, you can add or replace anytime you need, or if you make an accessory change and want keep the same switch. Get that custom look in your marine electronics! Tool to change covers supplied.

P/N 90046-90059 ILLUMINATED SWITCH COVER RRP $ 5

90046 90047 90048 90049 90050 90051 90052

90053 90054 90055 90056 90057 90058 90059


20E & O E


Optional Cover 90042

Designed with the marine mechanic or auto electrician in mind these kits are high grade tinned copper terminals and all insulation is glue lined to ensure a proper seal. Supplied in a heavy duty abs plastic container which has 17 different compartments; each compartment is labeled with reorder numbers top and bottom. The kit includes spade, ring & joiners - all are colour coded and can be purchased as our complete service kit including all common sizes or in convenient refill packs.

P/N 90105 GLUE LINED TINNED COPPER TERMINAL SERVICE KIT 620 PIECES RRP $ 295P/N 90078 FEMALE BLADE TERMINAL 2.5-3MM RED (REFILL 40pcs) RRP $ 18P/N 90079 FEMALE BLADE TERMINAL 4MM BLUE (REFILL 40pcs) RRP $ 19P/N 90080 FEMALE BLADE TERMINAL 6-8MM YELLOW (REFILL 40pcs) RRP $ 21P/N 90081 CABLE JOINER 2.5-3MM RED (REFILL 40pcs) RRP $ 18P/N 90082 CABLE JOINER 4MM BLUE (REFILL 40pcs) RRP $ 19P/N 90083 CABLE JOINER 6-8MM YELLOW (REFILL 30pcs) RRP $ 17P/N 90084 RING TERMINAL 3.5MM RED (REFILL 40pcs) RRP $ 18P/N 90085 RING TERMINAL 10MM RED (REFILL 30pcs) RRP $ 14P/N 90086 RING TERMINAL 6MM RED (REFILL 40pcs) RRP $ 18P/N 90087 RING TERMINAL 8MM RED (REFILL 40pcs) RRP $ 18P/N 90088 RING TERMINAL 3.5MM BLUE (REFILL 40pcs) RRP $ 19P/N 90089 RING TERMINAL 10MM BLUE (REFILL 30pcs) RRP $ 15P/N 90090 RING TERMINAL 6MM BLUE (REFILL 40pcs) RRP $ 19P/N 90091 RING TERMINAL 8MM BLUE (REFILL 40pcs) RRP $ 19P/N 90092 RING TERMINAL 6MM YELLOW (REFILL 30pcs) RRP $ 15P/N 90093 RING TERMINAL 8MM YELLOW (REFILL 30pcs) RRP $ 15P/N 90094 RING TERMINAL 10MM YELLOW (REFILL 30pcs) RRP $ 19

Viper GLUE LINED TINNED COPPER TERMINAL SERVICE KIT & REFILL PACKS

Viper blade fuse holders come in 4, 6 & 10 gang versions and are designed for marine use. The inbuilt LED light glows when the fuse is broken, which allows you to quickly identify faulty fuses. Highly recommend-ed for any battery management system in your vessel, complete with a clear removable clip on cover.The fuse holders can be joined in any combination by the solid link bar provided.

P/N 90114 MARINE FUSE HOLDERS 4 GANG RRP $ 19P/N 90115 MARINE FUSE HOLDERS 6 GANG RRP $ 24P/N 90116 MARINE FUSE HOLDERS 10 GANG RRP $ 32

Viper PRO SERIES MARINE BLADE FUSE HOLDERS

Heavy duty waterproof marine blade fuse holder with transparent orange sealed cap that locks closed and has a mounting tab for easy instalation - accepts a single standard blade fuse up to 30amps. Combine this fuse holder with our LED indicator blade fuses and you can quickly see why these are becoming standard equipment for most boat builders.

P/N 90103 VIPER PRO SERIES WATERPROOF INLINE BLADE FUSE HOLDER RRP $ 12

Viper PRO SERIES WATERPROOF INLINE BLADE FUSE HOLDER

These pro series stainless steel dual stud busbars are insulated featuring 8mm studs, narrow footprint for tight places and can even be used for extending outboard motor cables. Ideal for under-dash use and designed for marine use.(25mm X 85mm X 12mm), 37mm stud height.

P/N 90064 STAINLESS STEEL MARINE DUAL STUD BUSBAR RRP $ 18

Viper PRO SERIES STAINLESS STEEL MARINE DUAL STUD BUSBAR

WORKSHOP SERVICE KITS AND REFILL PACKS





620 pc Terminal Kit

Refill Packs


22E & O E


WORKSHOP SERVICE KITS & REFILL PACKSViperDesigned and Built By Bell Marine

Gone are the days when you need a multi-meter to check which fuse has blown! Stop bumping your head and fumbling around in the dark looking for blown fuses under your cramped dash. The Viper Pro Series LED indicator fuse will light when blown, making it easily identifiable allowing you to replace it immedi-ately without having to remove every fuse, so you can get on with your boating and fishing. Available in numerous sizes and colour coded for convenience.

P/N 90117 LED BLADE FUSE SERVICE KIT 242 PIECE INC 2 x 90103 INLINE FUSE HOLDERS RRP $ 325P/N 90095 LED INDICATOR BLADE FUSE 3 AMP PURPLE (REFILL 30pcs) RRP $ 39P/N 90096 LED INDICATOR BLADE FUSE 5 AMP ORANGE (REFILL 30pcs) RRP $ 39P/N 90097 LED INDICATOR BLADE FUSE 7.5 AMP BROWN (REFILL 30pcs) RRP $ 39P/N 90098 LED INDICATOR BLADE FUSE 10 AMP RED (REFILL 30pcs) RRP $ 39P/N 90099 LED INDICATOR BLADE FUSE 15 AMP BLUE (REFILL 30pcs) RRP $ 39P/N 90100 LED INDICATOR BLADE FUSE 20 AMP YELLOW (REFILL 30pcs) RRP $ 39P/N 90101 LED INDICATOR BLADE FUSE 25 AMP CLEAR (REFILL 30pcs) RRP $ 39P/N 90102 LED INDICATOR BLADE FUSE 30 AMP GREEN (REFILL 30pcs) RRP $ 39P/N 90103 WATERPROOF IN-LINE BLADE FUSE HOLDER - TRANSPARENT ORANGE RRP $ 12

P/N 90118 13MM CORRUGATED SPLIT TUBING - PER METRE RRP $ 1.2P/N 90119 25MM CORRUGATED SPLIT TUBING - PER METRE RRP $ 1.8

Our UV & chemical resistant flexible split polypropylene conduit tubing is ideal for marine applica-tions. Operating temperature is between -20C to 90C and is available in 13mm and 25mm diameter - sold by the metre.

Viper PP FLEXIBLE SPLIT CONDUIT TUBING

Viper PRO SERIES LED INDICATOR BLADE FUSE KIT & REFILL PACKS

P/N 50012 25MM HIGH PRESSURE DRAIN HOSE - ROLL 20METRE RRP $ 74

Viper 25MM ID HIGH PRESSURE DRAIN HOSE

The ultimate quality in tinned copper lugs and connectors are now made to VIPER specifications and have landed in Australia. You won’t struggle getting your cable into these counter sunk ends, we have also upscaled the gauge as well to ensure the ultimate in marine lugs. These lugs are the prefered choice by many service centres Australia wide.

P/N 90104 TINNED COPPER LUG SERVICE KIT 225 PIECES RRP $ 325P/N 90065 TINNED COPPER CABLE JOINERS M35 (REFILL 20pcs) RRP $ 30P/N 90066 TINNED COPPER CABLE JOINERS M25 (REFILL 20pcs) RRP $ 27P/N 90067 TINNED COPPER CABLE JOINERS M16 (REFILL 30pcs) RRP $ 32P/N 90068 TINNED COPPER CABLE JOINERS M10 (REFILL 30pcs) RRP $ 29P/N 90070 TINNED COPPER LUG 35-8MM (REFILL 15pcs) RRP $ 29P/N 90071 TINNED COPPER LUGS 25-10MM (REFILL 20PCS) RRP $ 30P/N 90072 TINNED COPPER LUG 25-8MM (REFILL 20pcs) RRP $ 30P/N 90073 TINNED COPPER LUG 25-6MM (REFILL 20pcs) RRP $ 27P/N 90074 TINNED COPPER LUG 16-8MM (REFILL 25pcs) RRP $ 30P/N 90077 TINNED COPPER LUG 10-6MM (REFILL 25pcs) RRP $ 27

Viper PRO SERIES DELUXE TINNED COPPER LUG SERVICE KIT & REFILL PACKS

Specifically designed for marine use this non toxic, 25mm ID clear reinforced drain hose is ideal for drains and general marine applications. It is UV stable and is sold by the 20mtr roll. Rated at 72 - 333 PSI maximum. (25mm ID, 30mm OD,)

Marine Tinned Lug Kit 225pcs

LED Fuse Kit 225pcs

Refill Kits

Finally a fuse that lights up when it’s broken !!

STOP THE CHAIN CLANG NOW!

Factory 1, 2 Network Drive

Carrum Downs VIC 3201

Australia

Tel: +61 3 9708 2846

Fax: +61 3 9708 2845

[email protected]

bellmarine.com.au

STAINLESS STEEL CHANDLERY & PERFORMANCE BOATING ACCESSORIES

WORLD CLASS

Viper..........the original and the bestchain sock is now available in fluoro green

The Viper Chain Sock is a high tech polyester blend braid

that encases your 6 or 8mm short link anchor chain.

How many times have you pulled up your anchor and the

chain has scraped the side of your boat or deck?

Does everybody in a 5 mile radius look at you when you throw

your anchor overboard?

Do you fish in shallow water for species such as whiting, bream etc?

Do you use a drum winch on your boat?

Do you own an aluminium boat?

If you answered yes to any of these questions you need a CHAIN SOCK!

Protect your boat’s anchor rollers, bow sprit, winch, gel-coat, gunwale &

stop spooking the fish!

AUTHORISED BELL MARINE RESELLER

Documents

WORLD CLASS 2018/19 · E. & O. E. SPECIFICATIONS MAY VARY OR CHANGE WITHOUT FURTHER NOTICE Page 4 PART NO. You Can’t Avoid Gravity! Freefall Winch TECHNICAL SPECIFICATIONS ˜ 2