Upload
phyllis-nguyen
View
25
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Receiver TDP Report to US SKA Consortium May 22, 2008 Sandy Weinreb, Joe Bardin, Glenn Jones, and Hamdi Mani California Institute of Technology [email protected]. Work Statement 2008 Telescope Tests – GAVRT 34m Noise Temperature Budget LNA Status Feed Integration. - PowerPoint PPT Presentation
Citation preview
Receiver TDP Report to US SKA Consortium
May 22, 2008
Sandy Weinreb, Joe Bardin, Glenn Jones, and Hamdi Mani
California Institute of Technology
• Work Statement• 2008 Telescope Tests – GAVRT 34m • Noise Temperature Budget• LNA Status• Feed Integration
Caltech TDP Work Statement
• Quad-Ridge Feeds – As one robust candidate for SKA wideband feeds, develop the quad-ridge feed.
• 0.3-1.7 GHz Receiver – A low cost, very low noise receiver covering this frequency range will be developed over a 4-year period utilizing either a quad-ridge feed or other wideband feeds being developed by others.
• 1-11 GHz Receiver - A low cost, very low noise receiver covering this frequency range will be developed over a 4-year period utilizing a selected feed. The task includes design, packaging, and testing of integrated circuit LNA’s
• 11-25 GHz Receiver - A low noise receiver covering this high frequency range will be developed over a 3-year starting in 2009. It is not clear at this time whether the receiver can be included as part of the 1-11 GHz system or if the SKA antenna will support higher frequencies.
• IF/LO Development - Experience with EVLA has shown that a large portion of the receiver cost is in the wide bandwidth frequency conversion, local oscillator distribution, optical fiber transducers, and A/D conversion. The goal of this work element is to drastically reduce the cost of these functions by development of large scale microwave integrated circuits
Component Current Technology2007
Noise, K, 1.4 GHz
Innovation Path2010
Noise, K,1.4GHz
Sky Background + atmosphere 4 No improvement here! 4
Spillover & Blockage
15 dB edge taper + 2.5% blockage, total 4% at 300K 12 Mesh skirt for 20 dB taper,
reduce blockage to 2% 7
Feed loss 10cm of .085”, 7K + 5K feed loss 12 Twin-lead feed terminals 5
LNA to feed loss 10cm of 0.141 Cu coax bend to dewar, .04 dB at 300K 3 40mm twin-lead 2
Vacuum feedthru Glass/Kovar bead, 0.1 dB 7 Quartz/gold bead, 0.04 dB 3
Coax in dewar 10cm or .141 SS/BeCu.09 dB at 190K 4 Air line 2
Coupler at 70K Werlatone C7753, 0.2 dB 3 or noise lamp coupling 2
Total Total Above 45 Total Above 25
LNA @ 300K Commercial 0.5 to 4 GHz LNA 60 Improved LNA @ 300K 15
LNA @ 60K Current LNA 14 Improved 70K LNA 5
Total Tsys, 300KLNA 105Total Tsys, LNA @
300K 40
Total Tsys, 60K LNA 59 Total Tsys. 60K LNA 30
SKA Tsys Budget – Current and Expected 2010
Wideband Receivers for Tests on 34m GAVRT Telescope
Goal: Efficiency and Tsys Measurements by Sept 2008
0.5 to 4 GHz Receiver
Quadridge Feed and Long-Life 50K Cooler
4 to 14 GHz Receiver
< 35K Tsys LNA+Feed
NXP BFU 725 2 stage LNA @17K April 15, 2008
0123456789
10111213141516
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
GHz
No
ise
, K
0
5
10
15
20
25
30
35
40
Ga
in, d
BNoise, 1.7V, 10mA
Gain, 1.7V, 10mA
Low-Cost SiGe 0.5 to 4 GHz Cryogenic LNA
• 7K noise at 17K with $.44 NXP transistor
• With STM transistor input stage noise is 2.5K at 17K, and 7K at 55K.
SiGe transistors in 2mm plastic package on printed circuit board
SKA Wideband Feeds Need Differential LNA’sCaltech will Integrate other candidate feeds with LNA’s and cryogenics
- a crucial step for low Tsys and robust operation
Input Twin-Lead Lines
Active Balun (Differential) LNA for ATA
Output coax
Differential SiGe LNA Designed for SKAOn IBM 8HP SiGe BiCMOS Wafer due July, 2008
5/01/2008 7
S21
Te
S11
S22
Example of 5 x 5 mm multi-project die processed by IBM
SiGe HBT Technology Cross-Section
Photo reproduced from: http://users.ece.gatech.edu/~cressler/
AD
AD
LO
RF I
Q
LNA
Downconverter
LPF
LPF
DSP
LO
A 0.5-20GHz Quadrature Downconverter
This chip has been designed and tested by J. Bardin at Caltech with fabrication in the IBM 8HP SiGe process. It provides highly accurate
quadrature mixers over an unusually large bandwidth
Measured image rejection is 50 dB from .5 to 12 GHz
Chip size 1.5 x 1.7 mm
Publications and Reports
S. Weinreb, J.C. Bardin, and H. Mani, “Design of Cryogenic SiGe Low-Noise Amplifiers,” IEEE Transactions on Microwave Theory and Techniques, Vol. 55, pp.2306-2311, Nov. 2007.
J.C. Bardin and S. Weinreb, “Experimental Modeling and Noise of SiGe HBTs,” to be published Proc. IEEE International Microwave Symposium, IMS, Atlanta, GA, June 16-19, 2008.
J.C. Bardin and S. Weinreb, “A 0.5-20GHz Quadrature Downconverter,” to be published IEEE Bipolar/BiCMOS Circuits and Technology Meeting, BCTM2008, Monterey, CA, Oct 13-16, 2008.
For seminars and internal reports see http://radiometer.caltech.edu