Upload
behzad
View
232
Download
0
Embed Size (px)
Citation preview
!to check All Neighbors of One Cell
rlnrp:cell=t8391xb,cellr=all,nodata;
!to define one way neighbour
rlnri:cell=t9175xb,cellr=t9176xb,single;
!To check CGI and BCCH/BSIC LAC of Once Cell
RLDEP:CELL=XXXXXXX;
!To check how many SDCCH's are there in one cell
RLCFP:Cell=t9169xb;
!To add SDCCH
RLCCC:CELL=T8954XB,CHGR=0,SDCCH=4,CBCH=YES,TN=1&&4;
!To check if all the TS's of the cell are taking traffic
RLCRP:CELL=t9316xa;
!to check which sites are down
RLCRP:CELL=ALL;
!To change OFFSETN and AWOFFSET
rlnrc:cell=t8853xc,cellr=t8661xb,offsetn=5;
rlnrP:cell=t8853xc,cellr=t8661xb;
exit;
!To delete neighbor relation
rlnre:cell=T8391XC,cellr=T8972XC;
!to change some parameters like MAXRET,CRO,PT,...
RLSBC:CELL=T8801XC,MAXRET=2;
!This command deactivates support for GPRS in the specified cell.
RLGSE:CELL=cell;
RLGSp:CELL=cell;
!This command activates support for GPRS in a cell.
RLGSI:CELL=cell;
!This command initiates printing of all alarm situations
RXASP:MOTY=RXOTG;
RXASP:MO=RXOTG-38;
!To get TG of a specisic cell
RXTCP:MOTY=RXOTG,CELL=T8853XA;
!
STDSP:DETY=RALT2,BSC=OWN;
!This command initiates printing of fault information for one or more managed object
RXMFP:MO=RXOTG;
RXMFP:MO=RXORX-411-1;
!The command is used to print cell measurement frequencies that are printed in the answer printout CELL MEASUREMENT FREQUENCIES.
RLMFP:CELL=t7676xa;
!To check transmision link
rxtcp:moty=rxotg,cell=T8798xa;
dtqup:dip=165rbl2;
dtqup:dip=8rbl2;
dtqdp:dip=7rbl2;
dtqdp:dip=8rbl2;
!To check if site is active or halted
!The command initiates the answer printout CELL STATUS
RLSTP:CELL=T9316XA;
!To check if TRXs are blocked
rxcdp:MO=RXOTG-41;
!to check CGI and BSIC and BCCH
rldep:cell=t8853xb;
!To Check Transmission Link
!This command generates a printout containing the quality situation for the specified Digital Paths (DIP).
dtqup:dip=42RBL2;
!This command prints all defined Abis paths concerning a given TG, several TGs or all TGs in the BTS.
RXAPP:MO=RXOTG-473;
!RXMOP:MO=RXOTG-38;
!To Halt a sector
RLSTC:CELL=T8575XC,STATE=HALTED;
!To Active a sector
RLSTC:CELL=T8575XC,STATE=ACTIVE;
!For SOFT RESET of a site:
RXBLI:MO=RXOTG-104,subord,FORCE;
rxese:mo=rxotg-104,subord;
rxesi:mo=rxotg-104,subord;
RXBLE:MO=RXOTG-104,subord;
!To check if cell is manually blocked (BLSTATE: MBL)
rxmsp:MO=RXOCF-418;
!To add neighbor
RLNRI:cell=T7412XB,cellr=T8058XC;
RLMFC:cell=t7456xb,MBCCHNO=2,MRNIC;
!To check if cell is barred or not (when it doesn't get traffic)
rlsbp:cell=t8315xa;
!CB : Yes
!This command prints all defined Abis paths concerning a given TG, several TGs or all TGs in the BTS
RXAPP:MO=RXOTG-3;
!To reduce power
RLCPC:CELL=t8860xa,bspwrb=42;
RLCPC:CELL=t8860xa,sctype=ul,bspwrt=42;
!If we don't have subcell structure (OL & UL)
RLCPC:CELL=t9474xb,bspwrb=42,bspwrt=42;
!To change locating parameter after reducing power
RLLOC:CELL=T8860XA,BSPWR=43;
RLLOC:CELL=T8860XA,SCTYPE=UL,BSTXPWR=43,BSRXMIN=100;
!If we don't have subcell structure (OL & UL)
RLLOC:CELL=T8860XA,BSPWR=43,BSTXPWR=43,BSRXMIN=100;
!Print GPRS Status and configuration
RLGSP: CELL=T7655xc;
rlbdp:cell=t7655xa;
RLGRP: CELL=WW54891;
!To change AWOFFSET (Assigned to worst cells
RLNRC:CELL=T8972XA,CELLR=T8956XA,AWOFFSET=5;
!
RLDMC:CELL=T9437XC,DMTHAMR=100,DMTHNAMR=100,DMQB=OFF,DMQBAMR=45,DMQBNAMR=35,DMQG=OFF,DMQGAMR=20;DMQGNAMR=15;
!To check CONFACT
rxmop:mo=RXOTG-86;
!To Change CHAP
RLHPC:CELL=C1A&C1B,CHAP=0;
! To find BCCH
rldep:cell=T7328XB;
! To add TCH frequencies
1-RLCFI:CELL=T0872YB,CHGR=1,DCHNO=24&26&33; foe add new frequencies
2-RLCFE:CELL=T0872YB,CHGR=1,DCHNO=25&34&36; for delete the previous frequencies
! to check the halted site
rlstp:cell=T9712XA;