Wi-Fi FunctionsDemonstration Manual

February 24th, 2012 Copyright © 2012 JVC KENWOOD Corporation All rights reserved.

CONFIDENTIAL

2

Direct MonitoringDirect Monitoring / Outside Monitoring 　→　 Camera ControlDirect Monitoring / Outside Monitoring 　→　 Transferring Video/Still

s Outside Monitoring 　→　 Access Point SettingOutside Monitoring (At Home)Outside Monitoring (Outside / Internet)Video MailAuto Photo MailGeotagging

C2 Everio’s Wi-Fi functions are best explained while demonstrating them.

These instructions show the steps required to use the functions listed below.

In the instructions, steps framed with a solid line are those that need to be performed every time, and steps framed with a dotted line are those that need to be performed only once (such as set-up).

Other Wi-Fi settings

VideoMail

DirectMonitoring

Shortcut menuCONFIDENTIAL

3

Direct Monitoring

Android/iPhone/Windows PC

Wi-Fi Direct

Usable in environments without wireless communication infrastructure, indoors or outdoors. Maximum effective distance is around 20m (but may change depending on usage conditions).

CONFIDENTIAL

4

Direct Monitoring (WPS – Easy Registration)

Everio Smartphone/Tablet (Android)

①Download Everio sync. app from Android Market.

③Tap “WPS” (easy registration).

④Activate WPS in Wi-Fi setting menu.

Monitoringscreen

Connection is established and monitoring starts

⑤Start Everio sync. app.

②MENU→Tap “DIRECT MONITORING”

in the shortcut menu.→SSID and PASS are shown.

WPS is not available depending on the smartphone model. (not available for iOS) . If so, input password to proceed to connection.

First confirm whether Wi-Fi function is available.

CURRENTLY BEING CONTROLLED

BY REMOTE

DirectMonitoring

CONFIDENTIAL

5

Direct Monitoring (Search and Connect)

Everio Smartphone/Tablet (Android/iOS)

①Download Everio sync. app from Android Market/App Store.

④Check SSID in Wi-Fi setting menuand then input password to register as an Access Point.

CURRENTLY BEING CONTROLLED

BY REMOTE

Monitoring screen

Connection is established and monitoring starts

⑤Start Everio sync. app

②MENU→Tap “DIRECT MONITORING”

in the shortcut menu.→SSID and PASS are shown.

DirectMonitoring

CONFIDENTIAL

6CONFIDENTIAL

Direct MonitoringOutside Monitoring　　→ Camera Control

Zoom Control (Wide/Tele)

Video Recording (Rec/Pause)

Still Recording (Snapshot)

7

VIDEO INDEX　　 Select a video and set IN/OUT point to transfer

OK →Stores on smartphoneCHECK →Plays on smarphone’s playerSHARE →For use with various smartphone utilities

such as attaching to an email, uploading to video sharing site, and so on.

Direct Monitoring / Outside Monitoring　　　→　 Transferring video/still images

STILL IMAGE INDEX　　 Select a still image to transfer

OK / CHECK / SHARE (Same as Video Transfer)

Android Phones/Tablets

CONFIDENTIAL

8

VIDEO INDEX　　 Select a video and IN/OUT point to transfer

OK →Stores in smartphone’s Camera Roll

　　 Transferred data can be checked with smartphone’s photo app. After that, it is possible to attach it to an email or upload to video sharing site.

STILL IMAGE INDEX　　 Select a still image to transfer

OK (Same as Video Transfer)

iPhone/iPad/iPod touch

Direct Monitoring / Outside Monitoring　　　→　 Transferring video/still images

CONFIDENTIAL

9

Enable UPnP(So that monitoring becomes possible via Internet)

Outside Monitoring　→ Access Point Setting

In case of EMOBILE Pocket WiFi

Allow machine-to-machine communication

Change authentic method to WPA2(To enable WPS easy registration)

Following settings are done for Pocket WiFi unit

Setting may be easier to do by inputting password

than using WPS.

CONFIDENTIAL

10

Outside Monitoring (At Home)

Wi-FiRouter

Android/iPhone/Windows PC

Wi-Fi

Wi-FiMobile Router

Wi-Fi

CONFIDENTIAL

11

Outside Monitoring (At Home)

Everio Access Point (AP)

③Download Everio sync. app from Android Market/App Store.

④MENU→Wi-Fi→OUTSIDE MONITORING

①Register Access PointMENU→Wi-Fi→NETWORK SETTINGS→ACCESS POINTS→ADD→Tap “EZ REGISTRATION WPS”.

②Activate WPS in Wi-Fi setting menu. Or press WPS button.

Connection is established and monitoring starts

⑤Start Everio sync. app.

Smartphone/Tablet

⑥For HTTP Authentication, enter username “everio” and password “0000”.

CONFIDENTIAL

12

Outside Monitoring (Outside/Internet)

Cellphone Network (3G/LTE)

Router

Modem

AndroidAndroid/iPhone/Windows PC

Ethernet

Wi-Fi 3G/LTE

RouterWi-Fi

Mobile RouterWi-Fi

CONFIDENTIAL

13

Outside Monitoring (Outside/Internet) [preparation]

Browser (PC/Smartphone)

③UPnP SettingMENU→Wi-Fi→OUT MONITORING SET→UPnP・ Set UPnP to ON.

①User RegistrationRegister for an account at https://dd3.jvckenwood.com/user/→Confirmation email will be sent. →Access the URL shown on the email.

②DDNS SettingMENU→Wi-Fi→OUT MONITORING SET→DDNS SETTING・ Set DDNS to ON.・ Enter username and password.

Everio

④Execute Outside Monitoring onceMENU→Wi-Fi→OUTSIDE MONITORING→CAMERA NETWORK INFO. Check that the URL (WAN) is displayed. Henceforth use this URL for connection.

Since default setting is ON, leave it as-is unless it has been

changed.

CONFIDENTIAL

14

Outside Monitoring (Outside/Internet)

Everio Access Point (AP)

③Download Everio sync. app from Android Market/App Store.

②Activate WPS in Wi-Fi setting menu.

Connection is established and monitoring starts

⑤Start Everio sync. app.

Smartphone/Tablet

⑥Enter the URL (WAN) on previous page when required. For HTTP Authentication, enter username “everio” and password “0000”.

①Register Access PointMENU→Wi-Fi→NETWORK SETTINGS→ACCESS POINTS→ADD→Tap “EZ REGISTRATION WPS”.

④MENU→Wi-Fi→OUTSIDE MONITORING

CONFIDENTIAL

15

Video Email / Auto Photo Mail

RouterWi-Fi

Ethernet

Cellphone Network(3G/LTE)

Wi-FiRouter

Wi-Fi 3G/LTE

Android/iPhone/Windows PC

While out and about

MobileRouter

Android/iPhone/Windows PC

Modem

CONFIDENTIAL

16

Video MailEverio

2. Mail Setting 　 MENU→Wi-Fi→NETWORK SETTING→MAIL SETTING　・ RECIPIENT’S EMAIL　・ SMTP SERVER, SMTP PORT, AUTHENTICATION METHOD

(Automatically configured if sender’s address is Gmail)　･ SENDER’S EMAIL, USERNAME, PASSWORD

Access Point (AP)

1. Registering AP (Refer to Outside Monitoring for details)

4. Send Video Mail MENU→VIDEO MAIL in the shortcut menu　　 Tap REC→Recording starts after a 5-second countdown.　　 Tap REC again to stop recording or it automatically stops

after 15 seconds.　　 SEND / QUIT / PLAY TO CHECK

3. Select Video Mail recipient(s) 　 MENU→WiFi→VIDEO MAIL ATTN.　　 Select recipient’s address registered in above 2.

Be sure to set all the

items before tapping SET.

CONFIDENTIAL

17CONFIDENTIAL

Auto Photo MailEverio Access Point (AP)

4. Execute Auto Photo Mail 　 MENU→Wi-Fi→DETECT/MAIL

3. Auto Photo Mail Setting 　 MENU→WiFi→DETECT/MAIL SETTING　　・ RECIPIENT’S EMAIL 　 Select recipient’s address registered in .②　　・ DETECTION METHOD 　 MOTION DETECTION or FACE DETECTION　　・ DETECTION INTERVAL 　 15 sec. (Min.), 60 min. (Max.)　　・ SELF RECORDING 　 OFF/ON

SELF RECORDING will stop when no subject is detected for 5

seconds.

1. Registering AP (Refer to Outside Monitoring for details)

2. Mail Setting 　 MENU→Wi-Fi→NETWORK SETTING→MAIL SETTING　・ RECIPIENT’S EMAIL　・ SMTP SERVER, SMTP PORT, AUTHENTICATION METHOD

(Automatically configured if sender’s address is Gmail)　･ SENDER’S EMAIL, USERNAME, PASSWORD

Be sure to set all the

items before tapping SET.

18

Geotagging

Android/iPhone

Wi-Fi Direct

After Wi-Fi Direct connection, retrieve location data from the smartphone and embed it into video/still data.

CONFIDENTIAL

19

Geotagging

Everio Smartphone/Tablet

①Download Everio sync. app from Android Market/App Store.

③Tap WPS (easy registration).(Don’t touch when registering manually) ④Activate WPS in Wi-Fi setting menu.

　 Or input password for SSID.

Location data is embedded on video/stills data

⑤Start Everio sync. app.

⑥Press the MENU key of smartphone → SET→ LOC INFO TRANS INT(Location information transmission interval)

⑦Start recording (video or stills)⑦Start recording→video or stills

Recording can be operated either by Everio o

r smarthphone.

②MENU→Tap “DIRECT MONITORING”

in the shortcut menu.→SSID and PASS are shown.

CONFIDENTIAL