WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-400 SERIES (Non-ASME) 150 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 5P/N 4400-005

Non-ASME Models Tank Max. A B C D E Sys. Ship Model Vol. Accept. Height Diameter Conn. Inset Conn.Centerline Stand Dia. Conn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins. ins. ins. kg lbs. WX-401 68 18 .65 794 311/4 413 161/4 124 47/8 38 11/2 123/4 1 35 76 .4 WX-402 95 25 .45 1010 393/4 413 161/4 124 47/8 38 11/2 123/4 1 43 94 WX-403 129 34 .33 1251 491/4 413 161/4 124 47/8 38 11/2 123/4 1 54 119 WX-404 258 68 .50 1200 471/2 610 24 159 61/4 41 15/8 16 11/4 101 222 WX-405 341 90 .39 1505 591/4 610 24 159 61/4 41 15/8 16 11/4 116 256 WX-406 417 110 .31 1778 70 610 24 159 61/4 41 15/8 16 11/4 129 284 WX-407 500 132 .35 1435 561/2 762 30 254 10 41 15/8 24 11/4 196 431

B

A

D

C

CHARGING VALVE

E

Operating Temperature 200° F (93° C) Working Pressure 150 PSIG (10 .5 bar)

Maximum Operating Conditions

Description Standard Construction Shell Steel Diaphragm Heavy Duty Butyl/EPDM System Connection Malleable Iron (NPTF) Liner Polypropylene Coating Red Oxide Primer Factory Precharge 30 PSIG (2 .2 bar)

Specifications

All dimensions and weights are approximate.

Code ApprovalsComplies with Low Lead Plumbing Law

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-400-C SERIES (ASME) 125 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 6P/N 4400-006

ASME Models Tank Max. A B C D E Sys. Ship Model Vol. Accept. Height Diameter Conn. Inset Conn.Centerline Stand Dia. Conn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins. ins. ins. kg lbs. WX-401-C 68 18 .65 794 311/4 413 161/4 124 47/8 38 11/2 123/4 1 35 77 .3 WX-402-C 95 25 .45 1010 393/4 413 161/4 124 47/8 38 11/2 123/4 1 42 93 WX-403-C 129 34 .33 1251 491/4 413 161/4 124 47/8 38 11/2 123/4 1 52 115 WX-404-C 258 68 .50 1200 471/4 610 24 159 61/4 41 15/8 16 11/4 103 227 WX-405-C 341 90 .39 1505 591/4 610 24 159 61/4 41 15/8 16 11/4 114 252 WX-406-C 417 110 .31 1778 70 610 24 159 61/4 41 15/8 16 11/4 130 286 WX-407-C 500 132 .35 1435 561/2 762 30 254 10 44 13/4 24 11/4 198 436

B

A

D

C

CHARGING VALVE

E

Also available with 150 PSIG (10.5 bar), 175 PSIG (12.3 bar) and 250 PSIG (17.6 bar)Complies with Low Lead Plumbing Law

Operating Temperature 200° F (93° C) Working Pressure 125 PSIG (8 .8 bar)

Description Standard Construction Shell Steel Diaphragm Heavy Duty Butyl/EPDM System Connection Malleable Iron (NPTF) Liner Polypropylene Coating Red Oxide Primer Factory Precharge 30 PSIG (2 .2 bar)

Maximum Operating Conditions

Specifications

All dimensions and weights are approximate. Constructed per ASME Code Section VIII, Division 1.

Code Approvals

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-400-C SERIES (ASME) 150 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 7P/N 4400-007

B

A

D

C

CHARGING VALVE

E

Operating Temperature 200° F (93° C) Working Pressure 150 PSIG (10 .5 bar)

Description Standard Construction Shell Steel Diaphragm Heavy Duty Butyl/EPDM System Connection Malleable Iron (NPTF) Liner Polypropylene Coating Red Oxide Primer Factory Pre-set Pressure 30 PSIG (2 .2 bar)

Maximum Operating Conditions

Also available with 125 PSIG (8.8 bar), 175 PSIG (12.3 bar) and 250 PSIG (17.6 bar)Complies with Low Lead Plumbing Law

Specifications

All dimensions and weights are approximate. Constructed per ASME Code Section VIII, Division 1.

Code Approvals

ASME Models Tank Max. A B C D E Sys. Ship Model Vol. Accept. Height Diameter Connection Inset Conn.Centerline Stand Dia. Conn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins. ins. ins. kg lbs WX-401-C 68 18 111⁄4 794 311⁄4 413 161⁄4 124 47⁄8 38 11⁄2 123⁄4 1 43 95 WX-402-C 95 25 111⁄4 1010 393⁄4 413 161⁄4 124 47⁄8 38 11⁄2 123⁄4 1 51 112 WX-403-C 129 34 111⁄4 1251 491⁄4 413 161⁄4 124 47⁄8 38 11⁄2 123⁄4 1 56 123 WX-404-C 258 68 34 1200 471⁄4 610 24 159 61⁄4 41 15⁄8 16 11⁄4 95 210 WX-405-C 341 90 34 1505 591⁄4 610 24 159 61⁄4 41 15⁄8 16 11⁄4 116 255 WX-406-C 417 110 34 1778 70 610 24 159 61⁄4 41 15⁄8 16 11⁄4 152 335 WX-407-C 500 132 46 1435 573⁄8 762 30 254 10 44 13⁄4 24 11⁄4 207 456

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-400-C SERIES (ASME) 175 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 8P/N 4400-008

B

A

D

C

CHARGING VALVE

E

Operating Temperature 200° F (93° C) Working Pressure 175 PSIG (12 .3 bar)

Description Standard Construction Shell Steel Diaphragm Heavy Duty Butyl/EPDM System Connection Malleable Iron (NPTF) Liner Polypropylene Coating Red Oxide Primer Factory Precharge 30 PSIG (2 .2 bar)

Maximum Operating Conditions

Specifications

All dimensions and weights are approximate. Constructed per ASME Code Section VIII, Division 1.

Code Approvals

ASME Models Tank Max. A B C D E Sys. Ship Model Vol. Accept. Height Diameter Conn. Inset Conn.Centerline Stand Dia. Conn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins . ins. ins. kg lbs. WX-401-C 68 18 .65 794 311/4 413 161/4 124 47/8 38 11/2 123/4 1 43 95 WX-402-C 95 25 .45 1010 393/4 413 161/4 124 47/8 38 11/2 123/4 1 51 112 WX-403-C 129 34 .33 1251 491/4 413 161/4 124 47/8 38 11/2 123/4 1 56 123 WX-404-C 258 68 .50 1200 471/4 610 24 159 61/4 41 15/8 16 11/4 95 210 WX-405-C 341 90 .39 1511 591/2 610 24 159 61/4 41 15/8 16 11/4 116 255 WX-406-C 417 110 .31 1778 70 610 24 159 61/4 41 15/8 16 11/4 152 335 WX-407-C 500 132 .35 1435 573/8 762 30 254 10 41 15/8 24 11/4 207 456

Also available with 125 PSIG (8.8 bar), 150 PSIG (10.5 bar) and 250 PSIG (17.6 bar)Complies with Low Lead Plumbing Law

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX- 400-C SERIES (ASME) 250 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 9P/N 4400-009

B

A

D

C

CHARGING VALVE

E

Operating Temperature 200° F (93° C) Working Pressure 250 PSIG (17 .6 bar)

Description Standard Construction Shell Steel Diaphragm Heavy Duty Butyl/EPDM System Connection Malleable Iron (NPTF) Liner Polypropylene Coating Red Oxide Primer Factory Precharge 30 PSIG (2 .2 bar)

Maximum Operating Conditions

Specifications

All dimensions and weights are approximate. Constructed per ASME Code Section VIII, Division 1.

Code Approvals

ASME Models Tank Max. A B C D E Sys. Ship Model Vol. Accept. Height Diameter Conn. Inset Conn.Centerline Stand Dia. Conn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins . ins. ins. kg lbs. WX-401-C 68 18 .65 794 311/4 413 161/4 124 47/8 38 11/2 123/4 1 57 126 WX-402-C 95 25 .45 1010 393/4 413 161/4 124 47/8 38 11/2 123/4 1 65 145 WX-403-C 129 34 .33 1251 491/4 413 161/4 124 47/8 38 11/2 123/4 1 83 183 WX-404-C 258 68 .50 1200 471/4 610 24 159 61/4 41 15/8 16 11/4 179 395 WX-405-C 341 90 .39 1511 591/2 610 24 159 61/4 41 15/8 16 11/4 187 413 WX-406-C 417 110 .31 1778 70 610 24 159 61/4 41 15/8 16 11/4 152 635 WX-407-C 500 132 .35 1435 573/8 762 30 254 10 41 13/4 24 11/4 207 850

Also available with 125 PSIG (8.8 bar), 150 PSIG (10.5 bar) and 175 PSIG (12.3 bar)Complies with Low Lead Plumbing Law

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-420 SERIES (Non-ASME) 100 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 10P/N 4400-010

Maximum Operating Conditions

Specifications

CHARGINGVALVE

B A

E

Operating Temperature 240° F (115° C) Working Pressure 100 PSIG (7 .1 bar)

Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Ins . Minimum System Connection Malleable Iron (NPTF) Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .8 bar)

D

C

All dimensions and weights are approximate.

Tank 0 PSIG Max. Recomm A B C D E Sys. Ship Model Vol. Acc. Vol. Acc. Vol. Height Diameter Conn. Inset Conn. Centerline Stand Diameter Conn. Wt. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. mm ins. mm ins. mm ins. ins. kg lbs. WX-421 600 158 158 386 102 1895 745/8 762 30 83 31/4 108 41/4 610 24 2 176 388 WX-422 800 211 211 519 137 2353 925/8 762 30 83 31/4 108 41/4 610 24 2 206 454 WX-423 1000 264 264 647 171 2086 821/8 914 36 114 41/2 128 51/16 762 30 3 230 506 WX-424 1200 317 317 780 206 2400 941/2 914 36 114 41/2 128 51/16 762 30 3 259 571 WX-426 1600 422 422 1037 274 2073 815/8 1219 48 187 73/8 156 61/8 1067 42 3 440 971 WX-427 2000 528 528 1298 343 2435 957/8 1219 48 187 73/8 156 61/8 1067 42 3 554 1222

Complies with Low Lead Plumbing Law

Non-ASME Models

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-400/450 SERIES (Non-ASME) 150 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 11P/N 4400-011

CHARGINGVALVE

A

E

B

D

C

Operating Temperature 240° F (115° C) Working Pressure 150 PSIG (10 .5 bar)

Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Ins . Minimum System Connection Malleable Iron (NPTF) Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .8 bar)

Tank 0 PSIG Max. Recomm. A B Sys. C D E Ship Vol. Acc. Vol. Acc.Vol. Height Diameter Conn. Conn. Conn. Stand Wt. Model Inset CtrLine Dia. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX-447 200 53 53 129 34 1150 451/4 610 24 2 2 33/4 19 120 263 WX-448 300 80 80 197 52 1502 591/8 610 24 2 2 33/4 19 140 308 WX-449 400 106 106 261 69 1857 731/8 610 24 2 2 33/4 19 144 317 WX-450 500 132 132 322 85 2200 865/8 610 24 2 2 33/4 19 162 357 WX-451 600 158 158 386 102 1861 731/4 762 30 2 31/2 51/2 24 223 492 WX-452 800 211 211 519 137 2312 91 762 30 2 31/2 51/2 24 272 600 WX-453 1000 264 264 647 171 2184 86 914 36 3 41/2 7 30 310 684 WX-454 1200 317 317 780 206 2489 98 914 36 3 41/2 7 30 346 763 WX-455 1400 370 370 908 240 2804 1103/8 914 36 3 41/2 7 30 369 813 WX-456 1600 422 422 1037 274 2080 817/8 1219 48 3 71/2 71/8 42 537 1184 WX-457 2000 528 528 1298 343 2470 971/4 1219 48 3 71/2 71/8 42 606 1335

Maximum Operating Conditions

Specifications

All dimensions and weights are approximate.

Complies with Low Lead Plumbing Law

Non-ASME Models

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-440-C/460-C SERIES (ASME) 125 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 12P/N 4400-012

CHARGINGVALVE

A

E

B

D

C

Operating Temperature 240° F (115° C) Working Pressure 125 PSIG (8 .8 bar)

Tank 0 PSIG Max. Recomm. A B Sys. C D E Ship Vol. Acc. Vol. Acc.Vol. Height Diameter Conn. Conn. Conn. Stand Wt. Model Inset Ctr.Line Dia. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX-447-C 200 53 53 129 34 1150 451/4 610 24 2 2 33/4 19 120 263 WX-448-C 300 80 80 197 52 1502 591/8 610 24 2 2 33/4 19 143 315 WX-449-C 400 106 106 261 69 1857 731/8 610 24 2 2 33/4 19 145 319 WX-450-C 500 132 132 322 85 2200 865/8 610 24 2 2 33/4 19 159 351 WX-451-C 600 158 158 386 102 1867 731/4 762 30 2 31/2 51/2 24 224 493 WX-452-C 800 211 211 519 137 2312 91 762 30 2 31/2 51/2 24 273 602 WX-453-C 1000 264 264 647 171 2184 86 914 36 3 41/2 7 30 307 676 WX-454-C 1200 317 317 780 206 2489 98 914 36 3 41/2 7 30 346 762 WX-455-C 1400 370 370 908 240 2804 1103/8 914 36 3 41/2 7 30 382 843 WX-456-C 1600 422 422 1037 274 2080 817/8 1220 48 3 71/2 71/8 42 523 1154 WX-457-C 2000 528 528 1298 343 2470 971/4 1220 48 3 71/2 71/8 42 604 1331 WX-458-C 2498 660 660 1624 429 2134 84 1524 60 4 8 6 54 658 1450WX-459-C 2998 792 792 1949 515 2438 96 1524 60 4 8 6 54 984 2169 WX-460-C 3501 925 925 2275 601 2718 107 1524 60 4 8 6 54 1043 2300 WX-461-C 3997 1056 1056 2596 686 2972 117 1524 60 4 8 6 54 1197 2638 WX-462-C 4996 1320 1320 3247 858 2743 108 1829 72 4 8 6 60 1588 3500 WX-463-C 7494 1980 1980 4871 1287 3556 140 1829 72 4 8 6 60 1860 4100

Also available with 150 PSIG (10.5 bar),175 PSIG (12.3 bar) and 250 PSIG (17.6 bar)Complies with Low Lead Plumbing Law

Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Ins . Minimum System Connection Malleable Iron (NPTF) Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .8 bar)

Specifications

Constructed per ASME Code Section VIII, Division 1. All dimensions and weights are approximate.

Maximum Operating Conditions

ASME Models

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-400-C/450-C SERIES (ASME) 150 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 13P/N 4400-013

D

C

ASME Models Tank 0 PSIG Max. Recomm. A B Sys. C D E Ship Vol. Acc. Vol. Acc. Vol. Height Diameter Conn. Conn. Conn. Stand Wt. Model Inset CtrLine Dia. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX-447-C 200 53 53 129 34 1150 451⁄4 610 24 2 2 33⁄4 19 120 263 WX-448-C 300 80 80 197 52 1502 591⁄8 610 24 2 2 33⁄4 19 145 320 WX-449-C 400 106 106 261 69 1857 731⁄8 610 24 2 2 33⁄4 19 160 352 WX-450-C 500 132 132 322 85 2200 865⁄8 610 24 2 2 33⁄4 19 178 392 WX-451-C 600 158 158 386 102 1867 731⁄4 762 30 2 31⁄2 51⁄2 24 233 513 WX-452-C 800 211 211 519 137 2312 91 762 30 2 31⁄2 51⁄2 24 275 607 WX-453-C 1000 264 264 647 171 2184 86 914 36 3 41⁄2 7 30 367 810 WX-454-C 1200 317 317 780 206 2489 98 914 36 3 41⁄2 7 30 415 914 WX-455-C 1400 370 370 908 240 2804 1103⁄8 914 36 3 41⁄2 7 30 462 1018 WX-456-C 1600 422 422 1037 274 2080 817⁄8 1220 48 3 71⁄2 71⁄8 42 643 1418 WX-457-C 2000 528 528 1298 343 2470 971⁄4 1220 48 3 71⁄2 71⁄8 42 760 1676

Operating Temperature 240° F (115° C) Working Pressure 150 PSIG (10 .5 bar)

Description Standard Construction Shell Steel Bladder Material Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Ins . Minimum System Connection Malleable Iron (NPTF) Coating Red Oxide Primer Factory Pre-set Pressure 30 PSIG (2 .2 kg/cm2)

CHARGINGVALVE

A

E

B

Constructed per ASME Code Section VIII, Division 1. All dimensions and weights are approximate.

Specifications

Maximum Operating Conditions

Also available with 125 PSIG (8.8 bar),175 PSIG (12.3 bar) and 250 PSIG (17.6 bar)Complies with Low Lead Plumbing Law

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-440-C/450-C SERIES (ASME) 175 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 14P/N 4400-014

CHARGINGVALVE

A

E

B

D

C

Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Ins . Minimum System Connection Malleable Iron (NPTF) Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .8 bar)

Tank 0 PSIG Max. Recomm A B Sys. C D E Ship Vol. Acc. Vol. Acc.Vol. Height Diameter Conn. Conn. Conn. Stand Wt. Model Inset CtrLine Dia. No. Lit. Gal Gal Lit Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX-447-C 200 53 53 129 34 1165 451/

4 610 24 2 2 33/4 19 141 310 WX-448-C 300 80 80 197 52 1519 591/8 610 24 2 2 33/4 19 184 404 WX-449-C 400 106 106 261 69 1873 731/8 610 24 2 2 33/4 19 184 405 WX-450-C 500 132 132 322 85 2226 865/8 610 24 2 2 33/4 19 206 454 WX-451-C 600 158 158 386 102 1880 731/4 762 30 2 31/2 51/2 24 255 563 WX-452-C 800 211 211 519 137 2337 91 762 30 2 31/2 51/2 24 315 694 WX-453-C 1000 264 264 647 171 2184 86 914 36 3 41/2 7 30 384 846 WX-454-C 1200 317 317 780 206 2489 98 914 36 3 41/2 7 30 435 959 WX-455-C 1400 370 370 908 240 2804 1103/8 914 36 3 41/2 7 30 481 1060 WX-456-C 1600 422 422 1037 274 2080 817/8 1220 48 3 71/2 71/8 42 798 1750 WX-457-C 2000 528 528 1298 343 2470 971/4 1220 48 3 71/2 71/8 42 984 2169

Constructed per ASME Code Section VIII, Division 1. All dimensions and weights are approximate.

Specifications

Operating Temperature 240° F (115° C) Working Pressure 175 PSIG (12 .3 bar)

Also available with 125 PSIG (8.8 bar),150 PSIG (10.5 bar) and 250 PSIG (17.6 bar)Complies with Low Lead Plumbing Law

Maximum Operating Conditions

ASME Models

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

WX-440-C/450-C SERIES (ASME) 250 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 15P/N 4400-015

CHARGINGVALVE

A

E

B

D

C

Operating Temperature 240° F (115° C) Working Pressure 250 PSIG (17 .6 bar)

Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Ins . Minimum System Connection Malleable Iron (NPTF) Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .8 bar)

ASME Models

Also available with 125 PSIG (8.8 bar),150 PSIG (10.5 bar) and 175 PSIG (12.3 bar) Complies with Low Lead Plumbing Law

Tank 0 PSIG Max. Recomm. A B Sys. C D E Ship Vol. Acc. Vol. Acc.Vol. Height Diameter Conn. Conn. Conn. Stand Wt. Model Inset CtrLine Dia. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX-447-C 200 53 53 129 34 1168 46 610 24 2 2 33/4 19 152 336 WX-448-C 300 80 80 197 52 1480 581/2 610 24 2 2 33/4 19 183 403 WX-449-C 400 106 106 261 69 1873 733/4 610 24 2 2 33/4 19 224 493 WX-450-C 500 132 132 322 85 2194 863/8 610 24 2 2 33/4 19 259 570 WX-451-C 600 158 158 386 102 1892 741/2 762 30 2 31/2 6 24 369 813 WX-452-C 800 211 211 519 137 2324 911/2 762 30 2 31/2 6 24 457 1007 WX-453-C 1000 264 264 647 171 2162 851/8 914 36 3 37/8 63/4 30 644 1412 WX-454-C 1200 317 317 780 206 2477 971/2 914 36 3 37/8 63/4 30 755 1664 WX-455-C 1400 370 370 908 240 2791 1097/8 914 36 3 37/8 63/4 30 824 1808 WX-456-C 1600 422 422 1037 274 2080 817/8 1220 48 3 71/2 67/8 42 961 2108 WX-457-C 2000 528 528 1298 343 2432 953/4 1220 48 3 71/2 67/8 42 1012 2231

Specifications

Maximum Operating Conditions

Constructed per ASME Code Section VIII, Division 1. All dimensions and weights are approximate.

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

“WX” SERIES BOTTOM CONNECTION BLADDER SERIES (ASME) 125 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

ASME CERTIFICATION REQUIRED ______ Yes ______ No

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 16P/N 4400-016

Specifications Description Standard Construction Shell Carbon Steel Bladder Material Heavy Duty Butyl Bladder Thickness (models 35-100) .087 Ins . Minimum Bladder Thickness (models 130-600) .100 Ins . Minimum System Connection (NPTF) Stainless Steel Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .7 bar)

Maximum Operating Conditions Operating Temperature 240°F (115°C) Working Pressure 125 PSIG (8 .6 bar)

120ϒ

F

E

HOLE SIZE "G"ON

BOLT CIRCLE "D"

BOTTOM VIEW

Optional Seismic Restraints Tank Bolt Hole Diameter Circle Dim. Dim. Size B D E F G 10 125⁄8 2 2 9⁄16

12 143⁄4 2 2 9⁄16

16 163⁄4 2 2 9⁄16

20 163⁄4 2 2 9⁄16

24 18 2 2 9⁄16

30 223⁄4 3 3 3⁄4

Designed & constructed per ASME Section VIII, Division 1. All dimensions and weights are approximate.

125 PSIG WP ASME Models Model Tank Accept A B Sys. Ship No. Volume Volume Height Diameter Conn. Weight Lit. Gal. Lit. Gal. mm ins. mm ins. mm ins. kg lbs. WX-35-CL 35 10 35 10 948 371⁄16 254 10 32 11⁄4 32 69 WX-50-CL 50 13 40 11 941 371⁄16 305 12 32 11⁄4 35 76 WX-85-CL 85 22 40 11 872 345⁄16 406 16 32 11⁄4 42 92 WX-100-CL 100 26 40 11 991 39 406 16 32 11⁄4 45 98 WX-130-CL 130 34 100 27 881 3411⁄16 508 20 38 11⁄2 62 136 WX-165-CL 165 44 100 27 1008 3911⁄16 508 20 38 11⁄2 67 146 WX-200-CL 200 53 100 27 1039 407⁄8 610 24 38 11⁄2 91 198 WX-300-CL 300 80 100 27 1423 56 610 24 38 11⁄2 108 236 WX-400-CL 400 106 200 53 1743 685⁄8 610 24 50 2 129 282 WX-500-CL 500 132 200 53 2096 821⁄2 610 24 50 2 144 316 WX-600-CL 600 158 200 53 1702 67 762 30 50 2 206 450

Complies with Low Lead Plumbing Law

WELL-X-TROL®Pre-pressurized diaphragm-type well tanks

“WX” SERIES BOTTOM CONNECTION BLADDER SERIES (NON-ASME)125 PSIG Working Pressure

Job Name ____________________________________________

Location ____________________________________________

____________________________________________

____________________________________________

Engineer ____________________________________________

Contractor ____________________________________________

Contractor P.O. No. ___________________________________

Sales Representative ___________________________________

Model No. Ordered __________________________________

System Pressure Range ______________________________

Pump GPM ________________

Date Submitted ________________

Submittal data sheets can ONLY be ordered as a “Submittal Data Sheet Pack”, using MC# 4400. They are not available to order on an individual basis, however each data sheet is available on the AMTROL Web Site and can be downloaded and printed for use as needed. For the most updated technical specifications, please download sheet at www.amtrol.com

Rev. 04/11 17P/N 4400-017

Specifications Description Standard Construction Shell Carbon Steel Bladder Material Heavy Duty Butyl Bladder Thickness (models 35-100) .087 Ins . Minimum Bladder Thickness (models 130-600) .100 Ins . Minimum System Connection (NPTF) Stainless Steel Coating Red Oxide Primer Factory Precharge 25 PSIG (1 .7 bar)

Maximum Operating Conditions Operating Temperature 240°F (115°C) Working Pressure 125 PSIG (8 .6 bar)

120ϒ

F

E

HOLE SIZE "G"ON

BOLT CIRCLE "D"

BOTTOM VIEW

Optional Seismic Restraints Tank Bolt Hole Diameter Circle Dim. Dim. Size B D E F G 10 125⁄8 2 2 9⁄16

12 143⁄4 2 2 9⁄16

16 163⁄4 2 2 9⁄16

20 163⁄4 2 2 9⁄16

24 18 2 2 9⁄16

30 223⁄4 3 3 3⁄4

All dimensions and weights are approximate.

125 PSIG WP ASME Models Model Tank Accept A B Sys. Ship No. Volume Volume Height Diameter Conn. Weight Lit. Gal. Lit. Gal. mm ins. mm ins. mm ins. kg lbs. WX-35-L 35 10 35 10 948 371⁄16 254 10 32 11⁄4 32 69 WX-50-L 50 13 40 11 941 371⁄16 305 12 32 11⁄4 35 76 WX-85-L 85 22 40 11 872 345⁄16 406 16 32 11⁄4 42 92 WX-100-L 100 26 40 11 991 39 406 16 32 11⁄4 45 98 WX-130-L 130 34 100 27 881 3411⁄16 508 20 38 11⁄2 62 136 WX-165-L 165 44 100 27 1008 3911⁄16 508 20 38 11⁄2 67 146 WX-200-L 200 53 100 27 1039 407⁄8 610 24 38 11⁄2 91 198 WX-300-L 300 80 100 27 1423 56 610 24 38 11⁄2 108 236 WX-400-L 400 106 200 53 1743 685⁄8 610 24 50 2 129 282 WX-500-L 500 132 200 53 2096 821⁄2 610 24 50 2 144 316 WX-600-L 600 158 200 53 1702 67 762 30 50 2 206 450

Complies with Low Lead Plumbing Law