Welcome to the Big 2012

8/10/2019 Welcome to the Big 2012

http://slidepdf.com/reader/full/welcome-to-the-big-2012 1/14

Page 1 of 14

Welcome to the Biofeedback Interfaced

Graphics (BIG) 2012!



Page 2 of 14

Contents

What is the Biofeedback Interfaced Graphics (BIG) program? .................................................................. 3

How to use the Biofeedback Interfaced Graphics (BIG)? ........................................................................... 3

Activation of the Biofeedback Interfaced Graphics (BIG) ...................................................................... 3

Getting started ..................................................................................................................................... 5

The Energy Map ................................................................................................................................... 6

3D Energy In and Out ......................................................................................................................... 10

Balance Right and Left........................................................................................................................ 10

Balance Intensity ................................................................................................................................ 11

Biofeedback Movies and Autofocus Emphasis .................................................................................... 12

GSR Voluntary Change ....................................................................................................................... 14



Page 3 of 14

What is the Biofeedback Interfaced Graphics (BIG) program?

The Biofeedback Interfaced Graphics (B.I.G.) program has been developed by the inventor of the SCIO

System, Prof. Nelson/Desire’ Dubounet and Levente Ungvary, our dedicated programmer. The

Biofeedback Interfaced Graphics is an external program like the Body Viewer, Iridology, and Disease

Dictionary, that can be used together with the main SCIO Software or by itself, externally.

The Biofeedback Interfaced Graphics (B.I.G.) is an illustration of the SCIO’s Biofeedback functions: seeing

the stress reactions of our body and being able to monitor variations and changes occurring in different

physiological parameters.

How to use the Biofeedback Interfaced Graphics (BIG)?

Activation of the Biofeedback Interfaced Graphics (BIG)

The Biofeedback Interfaced Graphics (BIG) is automatically installed with the 5-5-2012 SCIO Software. An

icon called BIG will appear on your desktop. You can load and activate the Biofeedback Interfaced

Graphics (BIG) either from inside of the main SCIO Software under System Power Settings or directly

from your desktop.



Page 4 of 14

Double click on the BIG icon on your Desktop or start it from the main SCIO Software. If you start the BIG

from outside of the SCIO Software, you will get a device recognition panel. This means that your SCIO

device is properly connected and functioning.



Page 5 of 14

Please click on ‘Close’ to proceed.

The next window will ask you for the Username and Password of your QXSUBSPACE account. This is the

first window that appears when you start the BIG from inside the main SCIO Software. Please type your

username and password in the appropriate box and click on ‘Send to Server’.

You will be redirected to Paypal where you need to complete the Activation fee payment. After

completing the payment, the following message will be displayed:

Please click on ‘OK’ to start the BIG Software.

Getting started

To start the Biofeedback Interfaced Graphics (BIG) program, double click on the BIG icon on the desktop

or click on System Power Settings and Biofeedback Interfaced Graphics inside the main test panel of the

SCIO Software. The program will start with the default screen, the Energy Map.



Page 6 of 14

From this default screen, you can access several panels either from the top menu bar or from the drop

down menu.

The Energy Map

The Energy Map is a panel that allows the practitioner to view the real time changes of the physiological

parameters of the body electric. You can use this panel from inside and outside of the Main SCIOprogram.



Page 7 of 14

The graphic in the middle shows the harnesses measurements changes in real time. You can use this

function while you do a therapy from the SCIO Program or just on its own and see how the parameters

are changing while the therapy is working or while the patient is meditating or doing other Biofeedback

trainings.

The graphic on the top right side of the panel shows the output level. As soon as we stop the

measurement and the output the graphic will reflect that. This function can be used from both inside

and outside of the main SCIO Program.

The bars on the left side of the panel show the connection intensity between the client and the harness

measured through all electrodes and combinations of different measurement points.



Page 8 of 14

The Vitruvian Man on the bottom right corner is a representation of what the patient needs to balance.

By watching the feedback the device gives, the patient needs to concentrate and relax in order to have

the three bars in the middle. Here you have the option to increase sensitivity or Head gain if you feel it is

needed.

The VARHO Screen is only available when you start the BIG from the main SCIO Software. While doing a

therapy from inside the SCIO Software, you can see the how the VARHOP values modify during theBiofeedback training.



Page 9 of 14

Please click on ‘Close’ when you wish to exit the VARHO panel and on ’Stop Measurement’ when you

completed the therapy or wish to switch to another panel.



Page 10 of 14

3D Energy In and Out

3D Energy In and Out is a function available only from outside of the main SCIO Software that allows you

to view the patient’s ECG from different harness measurement points.

Select the harness point measurement and click on ‘Start ECG’. Click on ‘Stop ECG’ and ‘OK’ to stop the

measurement and move to another panel.

Balance Right and Left

Balance Right and Left Panel is a panel available both from inside and outside of the SCIO Software. This

is a Biofeedback Training Program that helps balancing the left and right side. To start the training please

click on ‘Start measurement’ and instruct your patient to concentrate and balance all bars to the middle.

You have the option of selecting a function filter from the right side. There is also the option of

increasing Gain or Sensitivity in case of a weak connection. To end the training, simply click on ‘Stop

Measurement’.



Page 11 of 14

Balance Intensity

The Balance Intensity is only available from outside of the main SCIO Software. The goal of this particular

Biofeedback Training is to have the patient concentrate and move the blue dot in the middle in order to

achieve physiological improvements with the change of the negative thoughts, emotions and behaviors.



Page 12 of 14

In this panel we have the possibility of loading a different background picture to increase the

effectiveness of the training and increase the sensitivity and gain in case of weak connection.

Biofeedback Movies and Autofocus Emphasis

This panel works from both inside and outside of the main SCIO Software, with the exception of the AFE

Autofocus Therapies. While you are doing a regular biofeedback session or you also have the option of

playing a guided imagery video to your patients that they can watch to help assist their session.



Page 13 of 14

The AFE Autofocus Emphasis Therapies are only available from the BIG when started outside of the main

SCIO Software. You have the option of selecting between several therapy types. These are 30 minutes

therapies that can be stopped anytime the practitioner feels appropriate.



Page 14 of 14

GSR Voluntary Change

The GSR Voluntary Change is available only from from the BIG started outside of the main SCIO Software.

This panel gives you the option of performing GSR measurements and stimulation. The practitioner can

set the Minimum and Maximum Frequency, the Intensity Level from 0 to 4 Volts, the Harmonic and

Fibonacci harmonic and click on ’Start GSR Stim’ to initiate the voltammetric signal.

To stop the stimulation, simply click on ‘Stop GSR Stim’.

If you have any questions, please feel free to contact us at [email protected]

Documents

Welcome to the Big 2012