Welcome to AGCO - Product Marke ng Bulle n · 2014. 9. 29. · 5300 DynaSwath Draper Head The average size of crop varie es have increased, crea ng a demand for a higher capacity

Date: Bulle n: Subject:

Distribu on:

07‐03‐14 MF14‐16PMB New Product Announcement: 5300 DynaSwath™ Draper Head All Massey Ferguson™ Commercial Hay Dealers

1

Product Marke ng Bulle n 5300 DynaSwath Draper Head

The average size of crop varie es have increased, crea ng a demand for a higher capacity means of harves ng. Massey Ferguson is pleased to announce the release of the new 5300 DynaSwath draper header exclusive for the WR Series windrowers. This new line‐up of draper headers have been designed and engineered to tackle the toughest crops, from canola to winter forage. The 5300 DynaSwath is new for model year 2015, replacing the 5200 series draper head. The 5300 DynaSwath will include working widths of 40 (12.2m), 35 . (10.7m), 30 . (9.1m), 25 . (7.6 m), and 20 . (6.1m). The 5300 DynaSwath features all new, single‐piece heavy‐duty reels, a double sickle hydraulic knife drive system, and a 78.5 in (2m) swath width opening: all to increase overall machine capacity.

2

Subject: New Product Announcement: 5300 DynaSwath Draper Header


Features

Six Bat Heavy‐Duty Reel Variable speed hydraulic reel drive

reel through a gear case reduc on Reel ne pitch is adjusted by a unique

“S” cam track design Improved feeding, especially in down

crop Reel ne pitch is adjusted by an

adjustable cam track Improved crop flow Gently lays crop on belts Maximum performance Be er windrow forma on

Heavy Duty Plas c Reel Tines Injec on molded

plas c Bend but will not

break!

Industry Exclusive Hesston Built Single Piece Reel Truss support on 35’ and 40’ to

minimize reel deflec on Ability to handle any crop No wrapping of crop Heavy duty ne tubes Largest diameter tubes in the industry

Tine Tube Comparison

3



Hydraulic Double Sickle Knife Drive Easily cut through tough, heavy crop 1,470 strokes per minute sickle speed 735 knife drive motor RPM ‐Cut faster – more acres per day ‐Cleaner cut at faster ground speed ‐More produc vity Less HP required to drive the knife ‐Less load on the sickle ‐Longer life of sickle drives

Heavy Duty Long Tang Sickle Guards Improved performance in

down or green crop Double heat treated,

extended tang sickle guard Proven design used on hay

head

Adjustable Sickle Hold Downs Minimal adjustments Placed on every other

guard Proven design used

on hay auger head

SCH knife system available on 2015 produc ons units

4



Extra Wide 78.5” (2m) Swath Opening Widest in the industry Higher throughput/capacity Consistent windrow forma on No “beaver huts” in heavy canola

78.5 in. (2m) opening!

Independent Header Relief Valve System Unique system allows either sickle drive motor to go over relief without stopping the rest of the header hydraulic drives Belts con nues to run Reel con nues to run No “beaver huts”

* Swath width opening the same width in side delivery posi on

5



Draper Belt Drives Pull, not push Drives moved to inside of

header Rubber covered drive rolls Less belt slip Spliced canvas with v‐groove Improved belt tracking

Flat Deck Improved crop flow Especially in high yield crops Even weight distribu on Improves belt tracking Reduces wear

Adjustable Skid Shoes Control header height Adapt to all field condi ons

Poly Skid Plates Replaceable, long life poly skid plates 1 skid per sickle sec on Bolt secured

6



Heavy Duty Gauge Wheels New, larger double gauge wheels 15“, spring loaded Increased durability Doubles as transport wheels

Header slow speed transport kit

Single Point Quick Connector Quickly & easily connect or

disconnect from tractor Posi ve, secure connec ons

every me Built‐in storage loca on for

connector

7



Technology Auto reel speed feature Automa cally match reel

speed to ground speed Even, consistent loading of

crop onto belts Improved windrow forma on Less crop sha ering

Smart Head Onboard ECU for improved diagnos cs Serviceable with EDT Has it’s own EDT port No tractor needed to update so ware

Simplified Dealer PDI From 8 hours (5200) to 1 hour

for dealer setup Reel is installed Belts are installed

8



Ballast Requirements With the increased robustness and general size of

the 5300 DynaSwath, ballast weights are required to counter balance the windrower

Plate weights are available from AGCO Parts, part number (700178559)

A maximum of 4 plate weights can be added, or installa on of one counter balance weight kit 700961626M can be added field installed, or from factory to cover all header widths

The plates and counter balance weights can be added to both WR9700, and WR9800 windrowers.

See below reference chart for further info

MF14-16PMBSPECS

Documents

Welcome to AGCO - Product Marke ng Bulle n · 2014. 9. 29. · 5300 DynaSwath Draper Head The average size of crop varie es have increased, crea ng a demand for a higher capacity