Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
www.go4b.com
Please refer to instruction manual for correct installation.
Information subject to change or correction. Feb 2012
4B COMPONENTS LIMITED 729 Sabrina Drive, East Peoria, IL 61611 USA
Tel: 309-698-5611 Fax: 309-698-5615
Product Datasheet
4B
Components
Limited
Watchdog Software v1.2.0
Watchdog Logging and Trending Software
FEATURES
► Monitor Up To 8 Watchdogs
► Log All Alarms
► Log/Print Bearing Temperatures
► User Managed Preventative Maintenance Messages
► Machine Run-Time Clock
► Optional Wireless Communications
DESCRIPTION Monitor bearing temperature, belt speed and belt alignment on up
to 8 Watchdog control units. Temperatures will automatically be
logged every 10, 60, or 300 seconds (user selectable). Bearing
temperatures can be automatically printed every 1, 8, or 24 hours
(this option can be disabled). All alarms are logged and date
stamped. Additionally, preventative maintenance (PM) messages
are provided to alert operators of scheduled maintenance based
on actual machine run time hours instead of calendar days.
Wireless
Options
Available
Larger Screenshot
of User Interface
on Next Page
www.go4b.com
Please refer to instruction manual for correct installation.
Information subject to change or correction. Feb 2012
4B COMPONENTS LIMITED 729 Sabrina Drive, East Peoria, IL 61611 USA
Tel: 309-698-5611 Fax: 309-698-5615
Product Datasheet
4B
Components
Limited
Watchdog Software v1.2.0
www.go4b.com
Please refer to instruction manual for correct installation.
Information subject to change or correction. Feb 2012
4B COMPONENTS LIMITED 729 Sabrina Drive, East Peoria, IL 61611 USA
Tel: 309-698-5611 Fax: 309-698-5615
Product Datasheet
4B
Components
Limited
Watchdog RS-485 Wiring Schematic
Watchdog Software v1.2.0
RS-485 Configuration
Wire Color Watchdog Terminal USB-RS485-1 Terminal
Blue A+ 2
White w/ Blue Stripe B- 1
Orange Y+ 3
White w/ Orange Stripe Z- 4
Switch Number Switch Position
1 Up (On)
2 Up (On)
3 Down (Off)
4 Down (Off)
Wire Termination
(Belden 8132 or Equivalent)
USB-RS485-1 Dipswitch Settings ES-U-2101-M*
* Contact 4B for settings if you have the ES-U-3001-M
www.go4b.com
Please refer to instruction manual for correct installation.
Information subject to change or correction. Feb 2012
4B COMPONENTS LIMITED 729 Sabrina Drive, East Peoria, IL 61611 USA
Tel: 309-698-5611 Fax: 309-698-5615
Product Datasheet
4B
Components
Limited
Quick Tip #1:
Termination Resistors are required at both ends of the network. At
each end there should be one resistor across A & B. There should
be another resistor across Y & Z.
NOTE: The wireless RS485-RF4 contains built-in termination
resistors which are enabled by a dipswitch. External termination
resistors are not necessary on this unit only.*
Quick Tip #2:
The shield / drain wire should be continuous throughout the
network, but only terminated to ground at one location. For
simplicity, you should connect this ground to terminal 16 on the
Watchdog nearest to the PC.
Quick Tip #3:
You Can Program up to 5 Planned Maintenance tags for each
Watchdog. Each time one is reached, it will alert the operator and
print / log the time of the alert and the acknowledgement.
Quick Tip #4:
The printer must be set up to operate on COM Port 1. This will be
connected to the computer via a 9-pin to 25-pin Null Modem
Cable.
Troubleshooting Tips
* USB-RS485-1 has jumpers available for termination, contact 4B for more information.
Watchdog Software v1.2.0
www.go4b.com
Please refer to instruction manual for correct installation.
Information subject to change or correction. Feb 2012
4B COMPONENTS LIMITED 729 Sabrina Drive, East Peoria, IL 61611 USA
Tel: 309-698-5611 Fax: 309-698-5615
Product Datasheet
4B
Components
Limited
Watchdog Software v1.2.0
Wireless Configuration
Switch Number Switch Position
1 Down (Off)
2 Down (Off)
3 Up (On) If at end of the line
Down (Off) If in the middle of network
4 Down (Off)
RS485-RF4 Dipswitch Settings
Wire colors will vary depending on whether the RS485-RF4 is on the “wired” or “wireless” side of the network.
Wire Color RS485-RF4
Blue TDB+
White w/ Blue Stripe TDA-
Orange RDB+
White w/ Orange Stripe RDA-
“Wireless” Side
Wire Color RS485-RF4
Blue RDB+
White w/ Blue Stripe RDA-
Orange TDB+
White w/ Orange Stripe TDA-
“Wired” Side
“Wireless” Side “Wired” Side
www.go4b.com
Please refer to instruction manual for correct installation.
Information subject to change or correction. Feb 2012
4B COMPONENTS LIMITED 729 Sabrina Drive, East Peoria, IL 61611 USA
Tel: 309-698-5611 Fax: 309-698-5615
Product Datasheet
4B
Components
Limited D
iag
ram
fo
r W
irin
g M
ult
iple
Wa
tch
do
gs
to
PC
(Wir
ed
an
d W
ire
les
sly
)
Watchdog Software v1.2.0