Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SeriesW600P
SeriesW500P
2 or 3 needle, cylinder bed, interlock stitch machine
2 or 3 needle, flatbed, interlock stitch machine
“Oil Barrier” type
W600PSeries
W500PSeries
“Oil Barrier” type
SeriesW500P
Series
2 or 3 needle, cylinder bed,interlock stitch machine
2 or 3 needle, flatbed,interlock stitch machine
W600P
W500PSeries W600PSeries
Check Point
Point
01
"Oil Barrier" type machines that completely block oil leakage.Adopting a state-of-the-art"Oil Barrier" technology!
The needle bar and looper shaft (only for W600P series) include a newly designed seal and recently developed bushing, exerting dramatic "Oil Barrier" effectiveness, preventing oil leakage and oil splashes. And maintenance is very simple and easy, such as change the oil seal.This "Oil Barrier" feature completely blocks even one drop of oil leaking from the needle bar and even while the machine is stopped at night.Thanks to this stable lubrication and high "Oil Barrier" effectiveness, the P type machines protect your important sewn products against oil stains.
●
●
●
※Looper shaft can be equipped with only for W600P series.
W500PSeries W600PSeries
Point
02
Conducting the Pursuit of Fine Finish with a Good Sense Decorative Stitch - Good to see and soft to the skin
Flatbed type for easy operation even on long goods.
Fine stitch contrived by Pegasus, reputed as a quality maker, corresponds to a wide range of sewing, not only to delicate inner wear but to outer wear. And it meets the need in era of high quality with a good sense in the days to come.
No. of needles : 2-3 needlesNo. of threads : 4-5 threadsNeedle space : 2-needle machine (2.4mm、3.2mm、4.0mm、4.8mm) 3-needle machine (4.8mm、5.6mm、6.4mm)Main feed dog's movement amount : Max.4.4mmDifferential feed ratio : 1 : 0.5~1 : 1.3*Presser foot lift : Max 6.0mm*Machine speed : Max. 6,000rpm
*Details differ according to subclasses and sewing conditions.
Applications : Binding tape,Covering, Attaching elastic lace,Hemming, Angled decorative stitching etc
Cylinder bed that's most suitable for tubular articles
W500P Specifications
No. of needles : 2-3 needlesNo. of threads : 4-5 threadsNeedle space : 2-needle machine (3.2mm、4.0mm、4.8mm) 3-needle machine (5.6mm、6.0mm、6.4mm)Main feed dog's movement amount : Max.4.5mmDifferential feed ratio : 1 : 0.6~1 : 1.5*Presser foot lift : Max 5.9mm*Machine speed : Max. 6,000rpm
*Details differ according to subclasses and sewing conditions.
Applications : Binding tape,Covering, Attaching elastic lace,Hemming, Attaching flat nit elastic tubular articles, Inserting elastic rings into waists of tubular goods etc
W600P Specifications
W500PSeries Subclasses
MDPL
■ Option
UTAT TK
MD AT TKMDPL PL
■ Option
UT PLKH
■ Option
FT■ Accessories
■ Option
AT TK
●Basic model for the W500P Series.●For plain seaming light to medium weight fabrics.●Flatbed causes to sew easily and beautifully even large fabrics and heavy weight fabrics.●Available for various kinds of applications with attachments, etc.
●For tape binding on underwear and T-shirts,etc.●The bed allows the binder to be placed in position horizontally for smoother tape feeding. Use of needle plate, feed dog, presser foot and front cover designed specifically for tape binding enables smooth binding. This means when you are sewing flies on briefs or joining shoulders on T-shirts, the cross seam sections pass through the machine easily.
3-needle,flatbed, interlock stitch machine for plain seaming
W562P-01GBx3563-needle,flatbed, interlock stitch machine for binding tape, with tape cutter
W562P-02GBx356/TK400
3-needle,flatbed, interlock stitch machine for covering
W562P-03Dx3563-needle,flatbed, interlock stitch machine for attaching elastic lace, with fabric trimmer, auto tape cutter, metering device
W562P-05CBx356/FT140/AT300/MD002
●For covering on sweat suits or sportswear.●With a stitch guide on the presser foot and the needle plate, the covering can be finely distributed along the plain seams to provide consistent covering with uniform seams. The feed dog is also specially designed to provide better covering.
●For attaching elastic lace to panties,slimmers,etc.●The fabric trimmer (FT device) trims the fabric edge neatly during sewing to produce clean finished products.The metering device(MD device) feeds elastic according to the feeding amount of fabric.Therefor the elastic is uniformly fed if the sewing speed is changed.
Binding tape - 02
Covering - 03 Attaching elastic lace - 05
Versatile machines for various applications - 01G(plain seaming, covering, hemming)
KH
● Subclass specifications
Needlespace(mm)
No. of
Thread
Application
/ Seam
Stitchlength(mm)
Presserfoot lift (mm)
1.2 - 4.4
1.2 - 4.4
1.2 - 3.3
1.2 - 4.4
1.2 - 3.3
1.2 - 4.4
1.2 - 4.4
1.2 - 4.4
1.2 - 3.3
1.2 - 3.3
1.2 - 4.4
1.2 - 4.4
Accessories / Option devices / RemarksSubclass Needle plateNo. of
Needle
Diff.
feed ratio
Max. speed
(rpm)
❶
❶
❷
❸
❷ ❸ ❹❺ ❻
❹❺
W5Orderinginformation 2P ×- / UT103
Top cover thread4: Without top cover thread6: With top cover thread
Subclass
Needle plateA: Suitable for the fine stitch length (1.7 mm or less)B: For standard stitch length (1.8 - 2.3 mm)C: Suitable for the coarse stitch length (2.5 mm or more)
Needle space
❻ Device
No. of needles
01G B 3 566
4
5
4
4
4
5
4
5
4
5
4
5
4
5
4
5
5
5
4
6.3
5.0
6.0
5.9
6.3
5.0
6.3
5.0
6.3
5.0
5.3
5.0
5.3
5.0
5.3
5.0
5.0
5.0
4.7
1:0.5 - 1.3
1:0.5 - 1.3
1:0.5 - 1.3
1:0.5 - 1.3
1:0.5 - 1.3
1:0.5 - 1.3
1:0.5 - 1.0
1:0.5 - 1.0
1:0.5 - 1.0
1:0.5 - 1.0
1:0.5 - 1.3
1:0.5 - 1.3
6,000
6,000
5,500
6,000
6,000
6,000
5,500(5,000with MD)
5,500(5,000with MD)
5,500(5,000with MD)
5,500(5,000with MD)
6,000
4,800
2
3
2
2
2
3
2
3
2
3
2
3
2
3
2
3
3
3
2
3.2
4.0
4.8
5.6
6.4
4.0
3.2
2.4
3.2
4.0
4.8
4.8
5.6
6.4
3.2
4.0
4.8
5.6
6.4
4.8
5.6
2.4
3.2
4.0
4.8
4.8
5.6
6.4
4.0
5.6
6.4
2.4
3.2
4.0
4.8
4.8
5.6
6.4
5.6
5.6
6.4
3.2
B
B
B
B
B
C
B
B
C
B
C
B
C
W562P-01G
W562P-01M
W562P-02D
W562P-02G
W562P-02H
W562P-03D
W562P-05B
-05C
W562P-05M
W562P-05S
W562P-05T
W562P-82A
W542P-84A
Plain seaming(Covering)(Hemming)
Binding tape
Covering
Attaching elastic lace
Angled decorativestitching
Pin tucking
Accessor ies : Hemming guide,covering guideOption devices : MD,AT,TK,UT,Binder,KH,PLRemarks : -01M:For light weight fabrics
Accessor ies : Fabric trimmer device (Right handed),TR,AT,TKOption devices : PL
Accessor ies : TROption devices : MD,AT,TK,Binder,PL
Accessor ies : TR,AT,TKOption devices : MD,Binder,PL
Option devices : UT,KH,PL
Accessor ies : Fabric trimmer device (Right handed)Option devices : MD,AT,TK,PL,LC
Accessor ies : Fabric trimmer device (Right handed)Option devices : MD,AT,TK,PL,LCRemarks : For light weight fabrics
Accessor ies : Fabric trimmer device (Right handed),AT,TKOption devices : MD,PL,LC
Accessor ies : Fabric trimmer device,AT,TKOption devices : MD,PL,LC
Accessor ies : PL Option devices : UT
Option devices : PL
❶❷ ❸ ❹ ❺ ❻
W600PSeries Subclasses
RP
■ Option
UTAT TK
PL MDRP
■ Option
AT TKPL MD
■ Option
UT PL■ Option
UT PL
●Basic model of the W600P Series.●For plain seaming light to medium weight fabrics.●Available for various kinds of applications with attachments,etc.
●For binding tape on light to medium weight fabrics such as underwear,T-shirts,etc.●Use of needle plate, feed dog, presser foot and front cover designed specifically for tape binding enables smooth binding. This means when you are sewing flies on briefs or joining shoulders on T-shirts, the cross seam sections pass through the machine easily.
3-needle,cylinder bed, interlock stitch machine for plain seaming
W664P-01GBx3562-needle,cylinder bed, interlock stitch machine for binding tape
W664P-02GBx248
Binding tape - 02
W664P-03FBx248/UT434 W664P-03GBx248/UT434
Covering - 03G(Folding over overlock seams)Covering - 03F(Flattening out overlock seams)
2-needle,cylinder bed, interlock stitch machine for covering (flattening out overlock seams), with top cover thread trimmer and underbed thread trimmer
2-needle,cylinder bed, interlock stitch machine for covering (folding over overlock seams), with top cover thread trimmer and underbed thread trimmer
Versatile machines for various applications - 01G(plain seaming, covering, hemming)
●For covering (flattening out overlock seams) medium weight fabrics such as sweat suits.
●Uniform seams are produced with the parts designed for covering. Each of the needle plate, differential feed dog and presser foot has the fabric guide (the presser foot fabric guide is a fixed type).
●The front cover includes the right and left fabric guides(the right fabric guide is a left-to-right adjusting type).
●The middle feed dog tooth on the differential feed dog can be adjusted up and down with a screw.
●For covering (folding over overlock seams) light weight fabrics such as T-shirts,blouses,etc.●Uniform seams are produced with the parts designed for covering. ●Each of the needle plate, differential feed dog and presser foot has the fabric guide(the presser foot fabric guide is a fixed type).●The front cover includes the right and left fabric guides(the right fabric guide is a left-to-right adjusting type).
MD
UT
PL AT TK
FT■ Accessories
■ Option
PL
FT■ Accessories
■ Option
■ Option
RP
RP
UT ATTK
PL MDHG
HG
UT PL
■ Accessories
■ Option
RP
FT
W664P-05BBx248/FT240/MD231 W664P-08BBx248/UT434
Hemming bottoms(without fabric trimmer) - 08Attaching elastic lace - 05
W664P-35ACx248/FT540/HG300/UT436 W664P-35BCx248/FT540/UT434
Hemming - 35B(without slide type pneumatic hemming guide)Hemming - 35A(with slide type pneumatic hemming guide)
2-needle,cylinder bed, interlock stitch machine for hemming bottoms of tubular goods, with fabric trimmer, top cover thread trimmer and underbed thread trimmer.
2-needle,cylinder bed, interlock stitch machine for attaching elastic lace, with fabric trimmer, metering device
2-needle,cylinder bed, interlock stitch machine for hemming bottoms, with top cover thread trimmer and underbed thread trimmer
2-needle,cylinder bed, interlock stitch machine for hemming bottoms of tubular goods, with fabric trimmer, pneumatic hemming guide, top cover thread trimmer and underbed thread trimmer.
●For hemming bottoms of light to midium weight tubular goods such as T-shirts,poloshirts,etc.●Equipped with the fabric guide (adjusting type) designed specifically for hemming bottoms. Suitable for width of hem from 25 to 30mm.
●For hemming bottoms of light to midium weight tubular goods such as T-shirts,poloshirts,etc.●The fabric trimmer positioned to the left of the needle trims the fabric edge neatly during sewing to produce clean finished products.●Equipped with slide type pneumatic hemming guide (HG device) that folds a hem smoothly. This easy-to-use hemming guide is air-operated with the knee switch, reducing operators' fatigue.
●For hemming bottoms of light to midium weight tubular goods such as T-shirts,poloshirts,etc.●The fabric trimmer positioned to the left of the needle trims the fabric edge neatly during sewing to produce clean finished products.
●For attaching elastic lace on women's underwear etc.●The fabric trimmer (FT device) trims the fabric edge neatly during sewing to produce clean finished products.●The metering device(MD device) feeds elastic according to the feeding amount of fabric.Therefor the elastic is uniformly fed if the sewing speed is changed.
W600PSeries Subclasses
UT
RP
FT RP
■ Accessories
■ Option
■ Accessories
■ Option
UT
HG FT RP
PL
UT PL
■ Accessories
■ Option
RPHG
UT PL
■ Accessories
■ Option
HG
W664P-30ABx356/HG301/RP113A/UT436 W664P-34ACx248/FT540/HG300/RP113A/UT436
W664P-32DBx356/HG301/RP110A/UT440 W664P-33ACx356/FT241/RP110A/UT333
Attaching knit elastic to tubular goods - 32 Attaching flat knit elastic to tubular goods - 33
3-needle,cylinder bed, interlock stitch machine for inserting elastic into waists of tubular goods, with pneumatic hemming guide, rear puller, top cover thread trimmer and underbed thread trimmer.
2-needle,cylinder bed, interlock stitch machine for inserting elastic into waists of tubular goods, with fabric trimmer, pneumatic hemming guide, rear puller, top cover thread trimmer and underbed thread trimmer.
3-needle,cylinder bed, interlock stitch machine for attaching knit elastic to tubular goods, with pneumatic hemming guide, rear puller, top cover thread trimmer and underbed thread trimmer.
3-needle,cylinder bed, interlock stitch machine for attaching flat knit elastic to tubular goods, with fabric trimmer, rear puller, underbed thread trimmer.
Inserting elastic into waists of tubular goods -30(Without fabric trimmer)
Inserting elastic into waists of tubular goods -34(With fabric trimmer)
●For inserting elastic into waists of light to medium weight tubular goods such as sweat pants,pajamas,etc.●Equipped with slide type pneumatic hemming guide (HG device) that folds a hem smoothly. This easy-to-use hemming guide is air-operated with the knee switch ,reducing operators' fatigue.●Equipped with rear puller (RP device) that pulls the fabric forcibly from the back of the needle drop hole. Therefore sewing the fabric that is difficult to be fed is easy.
●For inserting elastic into waists of light to medium weight tubular goods such as sweat pants,pajamas,etc.
●Equipped with slide type pneumatic hemming guide (HG device) that folds a hem smoothly. This easy-to-use hemming guide is air-operated with the knee switch ,reducing operators' fatigue.
●The fabric trimmer positioned to the left of the needle (FT device) trims the fabric edge neatly during sewing to produce clean finished products.
●Equipped with rear puller (RP device) that pulls the fabric forcibly from the back of the needle drop hole. Therefore sewing the fabric that is difficult to be fed is easy.
●For attaching flat knit elastic to light to medium weight fabrics such as waists of briefs,etc.
●Equipped with rear puller (RP device) that pulls the fabric forcibly from the back of the needle drop hole and fabric tensioner.Therefore the fabric and elastic of different sizes can be sewn uniformly.
●The fabric trimmer (FT device) trims the fabric edge neatly during sewing to produce clean finished products.
●For attaching knit elastic (a ring cut from tubular knit fabric of flexible material) to light to medium weight tubular goods such as waists of briefs,etc.
●Sews knit elastic that is folded in two or three onto the fabric.●Equipped with slide type pneumatic hemming guide (HG device) that folds a hem smoothly. This easy-to-use hemming guide is air-operated with the knee switch ,reducing operators' fatigue.
●Equipped with rear puller (RP device) that pulls the fabric forcibly from the back of the needle drop hole. Therefore sewing the fabric that is difficult to be fed is easy.
MD■ Accessories ■ Option
UTRP
Plain seaming(Covering)(Hemming)
Binding tape
Covering
Attaching elastic lace
Hemming
Attaching tape
Inserting elastic ringsinto waists oftubular goods
Attaching knitted elasticring to tubular goods
Attaching flat nit elastictubular articles
Hemming / inserting elastic
Needle space(mm)
B
B
B
B
C
B
CB
B
B
B
C
B
CCCCB
C
B
C
BCBCーB
C
B
C
BCBCBCB
C
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.50.9 - 4.50.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
0.9 - 4.5
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.1
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.31:0.6 - 1.31:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.8
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
1:0.6 - 1.3
5,500
5,500
6,000(5,000with MD)
6,000
6,000
6,000
5,000
5,500(5,000with MD)
6,000
6,000
6,0006,0006,000
5,000
5,000
5,000
6,000
6,000
5,000
5,000
5,000
5,000
5,000
5,000 Accessor ies : MD,RP113AOption devices : UT.RP,Binder
W664P-01G
W664P-01H
W664P-02G
W664P-03F
W664P-03G
W664P-03K
W664P-03L
W664P-05B
W664P-08A
W664P-08B
W664P-08DW664P-08EW664P-08N
W664P-35A
W664P-35B
W664P-35N
W664P-71A
W624P-12A
W664P-30A
W664P-34A
W664P-32DW664P-32D -32E
W664P-33A
W664P-33B
W664P-81A
2
33
2
3
2
332
332323
2
332
3
2
3322332
332
32333132
332
333333332
3
4
55
4
5
4
554
554545
4
554
5
4
5544554
554
54555254
554
554555554
5
No. of Thread
5.9
5.9
5.4
5.1
5.8
5.15.15.8
5.15.15.85.1
6.0
5.4
5.15.15.8
5.1
5.8
5.15.15.85.85.1
5.9
5.9
5.9
5.1
7.0
5.9
5.9
5.9
5.9
5.9
5.9
Stitch length(mm) Diff.feed ratio Accessories / Option devices / RemarksPresser foot lift
(mm)Max. speed(rpm)
Option devices : UT,PL,MD, AT,TK, RP,Binder
Accessor ies : TROption devices : PL, MD,AT,TK, RP.Binder
Option devices : UT, PLRemarks : Flattening out overlock seams
Option devices : UT, PLRemarks : Folding over overlock seams
Option devices : UT, PLRemarks : Folding over overlock seams ,single lap seaming
Accessor ies : Fabric trimmer device (Right handed)Option devices : MD,AT,TK, PL
Accessor ies : Hemming guideOption devices : UT, MD,PL,AT,TK, RP,BinderRemarks : For light weight fabrics(-08N)
Accessor ies : Open/close type of hemming guide Fabric trimmer device (Left handed)Option devices : UT, PL,RP
Accessor ies : Fabric trimmer deviceOption devices : UT, RP,PLRemarks : For light weight fabrics(-35N)
Option devices : UT,RP,PL,MD,AT,TK
Accessor ies : Open/close type of hemming guide,RP(RP113) Option devices : UT, RP
Accessor ies : Open/close type of hemming guide Fabric trimmer device,RPOption devices : UT, PL
Accessor ies : Open/close type of hemming guide,RP(RP110A) Option devices : UT, PL,RP
Accessor ies : Fabric trimmer device (Right handed),RPOption devices : UT, PL
Option devices : UT,RP,PL
SubclassApplication / Seam Needle plate No. of Needle
❶
❶ ❷
❷ ❸❹ ❺
❸❹
W664P ×- / UT111Subclass Needle plate
A: Suitable for the fine stitch length (1.7 mm or less)B: For standard stitch length (1.8 - 2.3 mm)C: Suitable for the coarse stitch length (2.5 mm or more)
Needle space
❺ Device
No. of needles
01G B 3 56
● Subclass specifications❶ ❷ ❸ ❹ ❺
3.24.04.85.66.45.63.24.04.85.66.43.24.04.85.66.45.64.04.85.66.45.64.85.64.85.66.43.24.04.85.66.45.64.04.85.66.44.04.85.66.45.64.04.84.85.66.45.64.04.85.66.45.64.04.85.66.44.85.66.45.65.66.4ー5.64.04.85.66.45.64.04.85.66.45.65.66.45.65.66.45.65.66.45.64.04.85.66.4
2-needle,cylinder bed, interlock stitch machine for hemming flat garment and simultaneously inserting elastic, with metering device, rear puller
W664P-81ACx248/MD520/RP113A
Hemming waists and simultaneously inserting flat elastic - 81●For hemming waists of briefs, women's shorts or swimsuits of which the sides are not closed and simultaneously inserting elastic.●The lower metering device feeds elastic according to the feeding amount of fabric. Therefore the elastic is uniformly fed if the sewing speed is changed.●Thanks to rear puller (RP device) that pulls the fabric folded into two or three by the binder forcibly from the back of the needle drop hole, a sewing operation is evenly and accurately performed.
Ordering information
Option devices : UT, PLRemarks : Flattening out overlock seams on extra heavy weight fabrics
Option / Device
Type
UTUT Thread trimmerThreads are easily cut, by pressing the treadle with the heel on an interlock stitch machine. There is no need for the operator to cut the threads when sewing is completed. This feature greatly enhances operator efficiency and allows for increased production.
These trimmers simultaneously cut needle, looper and top cover threads. There is no need for manual trimming, even during the sewing process when a top cover thread is used. The result is a substantial increase in production.
UTPL
UTPL
Presser foot liftPressing the treadle with your heel raises the presser foot. This device is easy to use, thus decreasing operator fatigue and increasing productivity.
UTMS
UTMS
Underbed threadtrimmerThis trimmer cuts needle and looper threads.
Underbedthreadtrimmer
Top coverthreadtrimmer
Electric
Pneumatic
Thread wiper Foot lifter
UT109UT110UT111UT112UT312UT313UT314UT315UT316UT317UT320UT321UT333UT334UT434UT435UT436UT437UT438UT439UT440UT441
Electricー
Electricー
Pneumaticー
Pneumaticー
Pneumaticー
Pneumaticー
Pneumatic
ーPneumaticー
Pneumaticー
Pneumaticー
Electric
Electric(Packed inaccessory)
Electric
Electric(Packed inaccessory)
Electric
Electric(Packed inaccessory)
Pneumatic
ー
-01
◯◯
◯◯
◯
◯◯
-03
◯◯
◯◯
◯
◯◯
-05
◯◯
◯◯
◯
-08
◯◯
◯◯
◯
◯◯
-12
◯
-30
◯◯
◯◯
◯
◯◯
-32
W600P
◯◯
◯◯
◯
◯◯
-33
◯◯
◯◯
◯
◯◯
-34
○○
○
○○
○
○○
-35A
○○
○
○○
○
○○
○○
○○
○
○○
-71
○○
○○
○
○○
-81
○○
○○
○
○○
Type
Electric
Pneumatic
Pneumatic
ー
Thread wiper
Electric(Packed inaccessory)Pneumatic(Packed inaccessory)
Pneumatic(Packed inaccessory)
Pneumatic
UT103UT104UT303UT304UT331UT423UT424UT425
Foot lifter-01
○○○○○○○
-03
○○○○○○○
-82
◯
W500P
Electricー
Pneumaticー
Pneumatic
ー
-35B,N
※This device can not be equipped with C type of needle plate finger.
MS100
-01
◯
-02
◯
-03
◯
-05
◯
-08
◯
-12
◯
-30
W600P
◯
-32
◯
-33
◯
-34
◯ ◯
-71
◯ ◯
-81-35
Condensedstitching deviceThanks to this device, no unraveling occurs because the stitches become automatically finer at the end of sewing. The need for a subsequent anti-unraveling operation is eliminated and quality of sewn products is increased.
※This device can be equipped with onlyfor W600P series.
Type
Pneumatic treadle operatedPL018
-01
◯
-02
◯
-03
◯
-04
◯
-05
◯
-84
◯
W500PType Features
Pneumatic treadle operatedPL018
-01
◯
-02
◯
-03
◯
-05
◯
-08
◯
-12
◯
-30
W600P
◯
-32
◯
-33
◯
-34
◯ ◯
-71
◯ ◯
-81-35Type Features
Features
ー
Pneumatic
Top cover threadtrimmer andunderbed threadtrimmer
Underbedthreadtrimmer
Top coverthreadtrimmer
Pneumatic Heel Treadle
W500PSeries W600PSeries
TK
FT
FT
AT
TK
MD
MD
ATAT
This is a device that trims the edge of the fabric when interlock stitch machines perform hemming, tape attaching or elastic inserting operations. The edge of the fabric is evenly and neatly finished.
Tape/Thread chain cutterThese devices cut a tape and/or thread chain at the start and end of sewing. No scissors are needed, resulting in greater operational efficiency. Two types of driving sources are available, pneumatic and electric.
Automatictape cutter
TKTape cutter
The cutter knife is lowered with the switch to cut the tape and/or thread chain. No scissors are needed. Two types of switches are available, finger and knee switches.
Pneumatic
Electric
Driving method
Fast action type (Rear cutting)Fast action type (Front cutting)
Front cuttingFast action type (Front cutting)
Rear cuttingFront cuttingRear cutting
Features
Drivingmethod
Features
AT302AT310AT610AT8AAT402AT410AT710
W522AP-01 W522P-04 -01
◯◯
◯◯
-02D
◯
◯
◯
-02G
◯◯
◯◯
-02H
◯
◯
◯
-05B、C、M
W500P
◯◯
◯◯
-05S、T
◯
◯
◯
-01
◯
◯
-02
◯
◯
-05
◯
◯
-08
◯
◯
-71
W600P
◯
◯
Fabric edgetrimmer
MD230MD240MD440MD441MD520MD640MD641MD642MD643
Mechanical
Electric
-01
○○
○○
-02
○○
○○
-05
○○
○○
-08
○○
○○
-71
○○
○○
-81
○
W600P
-01
○○○○
○○
-02G
○○○○
○○
-02H
○○○○
○○
-05
○○○○
○○
W500P
Waste chute type
Forced-air collection typeForced-air collection type with bladeForced-air waste collection type
Waste chute typeForced-air waste collection typeWaste chute type with bladeForced-air waste collection type
FT140FT141FT221FT222FT240FT240AFT241FT242AFT540
-05
○○
-33A
○
○
-33B
○
○
-34
○
-35
○
-02D
○
-05
○
Mechanicalmetering deviceThe elastic lace feeder with a mechanical metering device (MD), feeds the elastic lace according to the feeding of fabric. This allows for attached, beautiful and uniform elastic lace.
W600PW500PFeatures
Right handed
Left handed
Features
Type
Pneumatic
Electric
Driving method
Knee operation (Rear cutting)
Knee operation (Rear cutting,long blade)Knee operation (Front cutting)Knee operation (180°TK)
Knee operation (Rear cutting)Knee operation (Rear cutting,42V)Knee operation (Front cutting)
Knee operation (Middle cutting)(100mm width)
Features
TK300TK302TK303TK310TK321TK400TK402TK410TK450
W522AP-01
◯
W522P-04
◯
-01
◯
◯◯
-02D
◯
◯
-02G
◯
◯
-02H
◯
◯
-05B、C、M
W500P
◯
◯
◯
-05S、T
◯
◯
-01
◯◯
◯
-02
◯◯
◯
-05
◯◯
◯
-08
◯◯
◯
-71
W600P
◯◯
◯
Type
Type Type
The cutter knife automatically descends to cut a tape and/or thread chain when the sensor detects the edge of the fabric. Then the cut tape and/or thread chain is sucked up. Since the length of tape or thread chain that remains after a cut can be adjusted by stitch counting as desired, no skilled operator is needed.
ー100mm wide elastic lace
Standard type(100mm wide elastic lace)High performance type(100mm wide elastic lace)
Bottom metering devicePneumatic MD device standard type with tape cutter(front position)Pneumatic MD device high performance type with tape cutter(front position)Pneumatic MD device standard type with tape cutter(rear position)Pneumatic MD device high performance type with tape cutter(rear position)
Option / Device
Type
Type
HG Open/Close type of hemming guideThis sliding type hemming guide folds the fabric to form a hem in hemming operations. Thanks to this device, hemming is easy and resulting hem width is uniform, so quality products are obtained. Two types of driving sources are available, pneumatic and electric. ※This device can be equipped with only for W600P series.
RP Rear pullerThe roller pulls the fabric from behind the needle drop hole. Thanks to this device, the machine smoothly sews difficult-to-feed fabrics, providing beautifully finished products with no plyshifitng.※This device can be equipped with only for W600P series.
KH Flat type vacuum thread chain cutterThe suction inlet is positioned flush with the needle plate and right behind the presser foot. Thanks to this feature, wide, double chainstitch, extra heavy weight or woolen thread chains are smoothly sucked up. ※This device can be equipped with only for W500P series.
HGKnee operation
Pedal operation
Electric knee operation
Pneumatic knee operation
Pneumatic pedal operation
Pneumatic knee operation
Electric knee operation
Driving methodType
HG001HG002HG003HG004HG101HG102HG300HG301HG302HG303HG410AHG411AHG410BHG411B
-08
○
○
-30
○
○
○
○○
-32
○
○
○
○○
-34
○
○
○
○
○
-35A
○
○
○
○
○
○
○
W600P
RPUrethane rubber
nylon
Urethane rubbernylon
Roller material
FlatGear(70°)Gear(90°)Flat
Gear(70°)
Surface of the roller
RP110ARP113ARP113BRP130ARP133A
-01
○○○○○
-02
○○○○○
-08 -12
○○○○○
-30
○○○
-32
○○○○○
-33
○○
-34
○
-35
○○○○○
-71
○○○○○
-81
○○○
W600P
KHFor standard fabricsFor light weight fabrics
Inlet type
KH007AKH008A
-01
○○
-01
○○
-03
○○
W522P W562P
“MP”is a registered trademark or a trademarkof Pegasus Sewing Machine Mfg. Co., Ltd. in Japan.
W500PSeries W600PSeries
5-7-2 Sagisu Fukushima-ku, Osaka 553-0002 JapanTEL : +81-6-6458-4739 / FAX : +81-6-6454-8785URL : http://www.pegasus.co.jp
UTAT TK
HGFT
MDRPMSPL
KH
W500P Series W600P Series
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
-02
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯
◯ ◯
-01 -03 -05 -08 -12 -30-02-01 -03 -04 -05 -82 -84 -32 -33 -34 -35 -71 -81
・ It may be unable to use the devices together depending on the the different combination, or the different use.
* The specification and/ or appearances of the equipment described in this catalog is subject to change without previous notice.
2012 PEGASUS SEWING MACHINE MFG.CO.,LTD.Catalog No.102881 Printed May, 2012.
Series
2 or 3 needle, flatbed, interlock stitch machine
W500P
Series
2 or 3 needle, cylinder bed, interlock stitch machine
W600P