VWHPV %LR (QKDQFHG ELR /HQH %LRSODVWLF elr /hqh lv d 6lhuud 5hvlqv 0dvwhuedwfk sro\phu dgglwlyh elr

VWHPV %LR (QKDQFHG ELR /HQH %LRSODVWLF elr /hqh lv d 6lhuud 5hvlqv 0dvwhuedwfk sro\phu dgglwlyh elr

  • View
    0

  • Download
    0

Embed Size (px)

Text of VWHPV %LR (QKDQFHG ELR /HQH %LRSODVWLF elr /hqh lv d 6lhuud 5hvlqv 0dvwhuedwfk sro\phu dgglwlyh elr

  • “Packaging With A Conscience”

    Multiplast Systems, Inc. - 440-349-0800 - multiplastsystems.com

    bio-Lene 14 characteristics / applications when added to polypropylene or polyethylene

    □ Formulated for enzyme consumption

    □ Sustainable packaging solution provides alternative to non bio-based packaging.

    □ Excellent injection molding, blow molding, and blown extrusion processability when added to polyprop\ylene extrusion processability when added to polyprop\ylene and polyethylene. Reduced tool clean-up and preventative maintenance.

    □ Microwavable

    □ Recyclable without effecting recycle stream

    □ Excellent balance of stiffness, flexibility and hinge property coupled with excellent Environment Stress Cracking Resistance (ESCR) property Resistance (ESCR) property

    □ Cost effective environmentally conscious value propositionDisclaimer This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended purposes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.

    Unless specified to the contrarUnless specified to the contrary, the values given have been established on standardized test specimens at room temperature. The figures should be regarded as guide values only and not as binding minimum values. Please note that, under certain conditions, the properties can be affected to a considerable extent by the design of the mold/die, the processing conditions and coloring.

    Under the recommended processing conditions small quantities of decomposition product may be given off during processing. To preclude any risk to the health and well-being of the machine operatives, tolerance limits for the work environment must be ensured by the provision of emachine operatives, tolerance limits for the work environment must be ensured by the provision of efficient exhaust ventilation and fresh air at the workplace n accordance with the Safety Data Sheet. In order to prevent the partial decomposition of the polymer and the generation of volatile decomposition products, the prescribed processing temperatures should not be substantially exceeded.

    bio-Lene 14 is a Sierra Resins Masterbatch polymer additive bio-concentrate, formulated for enzyme consumption. MSI bio-Lene 14, when added to polypropylene or polyethylene, provides environmentally friendly packaging. The Masterbatch compound provides outstanding moisture barriers properties, making it suited as an additive for personal care and amenities product packaging such as tubes, caps, and fasteners. bio-lene 14 is used in film applications for bags.fasteners. bio-lene 14 is used in film applications for bags.

    The emergence of technologies like injection stretch blow molding (ISBM), thin wall injection molding (TWIM) and thermoforming provide cost effective production.

    MSI bio-Lene 14 appearance and packaging Pellet appearance Brilliant ivory Packaging Gaylords / Drums Molded or extruded Very good clarity when added Appearance to clarified PP

    Typical Physical Properties Property Property Value Melt Flow Index 2.0/6.0g/10 min @180c, 2.16 Kg./ ASTM D1238 Specific Gravity 0.80/ 1.20/ ASTM D792 Pellet Size 0.98/1.25 Pellet Count/Weight 1.0/1.5 grams per 100 pellets Moisture 0.3% max, as packaged

    Multiplast Systems, Bio-Enhanced bio-Lene14 Bioplastic Masterbatch Portfolio