VSP Technologies - 2016 Engineering & Construction Program · VSP Technologies works with some of the largest Engineering & Construction ﬁrms in the U.S. and has been a trusted

Prince George, VA Kingsport, TN | Houston, TX | Parkersburg, WV | Lake Charles, LA | Baton Rouge, LA

© VSP Technologies 2014 - 2016

VSP Technologies works with some of the largest Engineering & Construction firms in the U.S. and has been a trusted supplier for over 35 years. Whether you need access to our $3 million in quality fluid-sealing products designed for reliability and safety, or expert advice and installation support, VSP Technologies is at your service.Thanks to less downtime, 6-sigma process fluid sealing improvements, installation training and access to our experts, VSP customers have reported over $100 million in customer documented cost savings!

VSP Technologies, utilizing a Six Sigma approach, works with customers to develop comprehensive fluid sealing management protocols. Coupling its deep engineering resources with decades of fluid sealing expertise, VSP can tailor a program to fit the unique needs of your paper mill.

Specification Purchasing Fabrication Supply

Inventory Management

Selection Installation Equipment Start-Up

Inspection & Monitoring

VSP Technologies deploys a team of 30 Engineers and Fluid Sealing Specialists who provide tailor-made solutions for your unique fluid sealing requirements.

Design Construction MRO Operations

Engineering & Construction

Innovate Service Perform8140 Quality Drive Prince George, VA 23875

800-334-6013 vsptechnologies.com



FastenersFlange Assembly KitsTracking Documents

Manufacturing & DistributionCut Gaskets, Spiral Wound Gaskets, Expansion Joints, Fasteners

CAD Controlled ManufacturingPTFE, Fiber Gaskets, Flexible GraphiteExpansion Joints

Rubber, Metal, PTFESpecialty Products

14 U.S Patents

Spiral Wound GasketsOuter, Inner & Anti-Buckling 326

CAD Controlled Manufacturing 9-Reciprocating Knife Tables1-Waterjet Table

Primary Manufacturers We Represent

Stress Optimized DesignsTracking Documents

Engineering & ConstructionInnovate Service Perform



Design ReviewCAD DrawingsGasket Stress OptimizationAssembly & Torque Guidance

Engineering Services

On-site TrainingEngineering & Maintenance TrainingInstallation Support

On-site Engineering24/7 Service

Specification DevelopmentTrouble-Shooting

Reverse Engineering

Technology FocusedSix Sigma Trained or Certified

Active in varous industry technical assocations;

19-Engineers & 11-Fluid Sealing Specialists

Technology FocusedCustomer Documented Cost Savings

Reduced Downtime, Root Cause Analysis, Specifications Review, 24/7 Service

Maintenance SupportGasket Boards

Torque Cards

1. Lubricate bolt threads and nut faces and tighten all nuts finger tight

2. Select the Target Assembly Torque for the flange type/metallurgy and operating temperature

3. Torque/tighten in a star pattern sequence as indicated below in (5) successive (increasing) increments to the Target Assembly Torque

4. After the 5th pass, continue tightening the bolts in a circular pattern at the Target Assembly Torque until no further nut movement occurs

Flange Assembly Procedure

Low Strength

Fastener MarkingsHigh Strength

Intermediate Strength

© VSP Technologies All Rights Reserved 2015/1000

8140 Quality Dr, Prince George, VA 23875(800) 334-6013

Innovate Service Perform




Recent Design & Construction

MRO Customers

DominionVirginia Hybrid Energy Center

2012

DominionWarren County Power Station

2015

Additional Support To Construction Firms

DuPont SpruanceZytel® Plant

2012Kevlar® Plant Expansion

2002

White Oak Semi-ConductorPlant Build

1996

DuPont Cooper RiverKevlar® Plant 2009

DuPont Morse MillAcid Plant 2008

Innovate Service Perform
