New Spot 4XT in WarmWhite

2

The perfect replacement for GU5.3 (50W) and GU10 (50W)

The latest led from Cree XTE with lens and heat sink to use in the residential market

Led modules from Vossloh-Schwabe provide excellent performance in term of efficiency and

quality of light combined with long lifetime.

The new generation of Cree XTE leds offers a higher efficiency and it is more cost effective

Lenses with different angles offer the possibility to create the perfect light distribution to satisfy every light requirement.

Thanks to better performances, higher efficiency and longer lifetime the led technology

is the right solution for many different applications.

3

Comparison 4-XP & 4-XT

LEDTypical forward voltage 3.2V 2.85VBinned at Tj=25°C Tj=85°CMaximum driving current 1.0A 1.5A

SPOT 4-XPower consumption @350mA 4.48W 3.99WPower consumption @500mA 6.60W 5.80WPower consumption @700mA 9.52W 8.54W

Luminous flux @350mA 328lm 373lmEfficiency @350mA (lm/W) 73.2lm/W 93.48lm/W

Luminous flux @500mA 426lm 496lmEfficiency @500mA (lm/W) 64.5lm/W 85.5lm/W

Luminous flux @700mA 557lm 663lmEfficiency @700mA (lm/W) 58.5lm/W 77.6lm/W

4-XP 4-XTBin>P4 Bin>Q3

����

����

����

4

Ø 0.17

Ø 0.35

Ø 0.52

3000K – beam angle: 10° 3000K – beam angle: 20° 3000K – beam angle: 30° 3000K – beam angle: 40°

1m

2m

3m

1m

2m

3m

1m

2m

3m

1m

2m

3m

Ø 0.7

Ø 1.4

Ø 2.1

Ø 0.35

Ø 0.70

Ø 1.06

Ø 0.53

Ø 1.07

Ø 1.61

10.000lx

2.500lx

1.111lx

Warm White: Luminous intensity distribution @700mA

3.100lx

775lx

344lx

1.600lx

400lx

178lx

1.100lx

275lx

122lx

5

Spot 4X, halogen lamps with reflector and led lamps

GU5.3/50W1400 cd @38°

GU/GZ10 50W1100 cd @30°

GU10 led850 cd @30°

3000K – beam angle: 30°

1m

2m

3m

Ø 0.53

Ø 1.07

Ø 1.61

1.600lx 1100lx 850lx

400lx 275lx 213lx

178lx 122lx 95lx

����������������

����������������

��������

����

��������

��������

6

Energy Saving: two examples

kW

months6 12

500

100

50

10 luminaires for 1.000hLux @2,5m

250

200

100

150

Spot 4X – 30°/40°

12V halolamp GU5.3– 38°

230V halolamp GU10– 30°

Led Lamp 6,5W – 35°

Led Lamp 5,5W – 30°

Spot 4X – 30°

Spot 4X – 40°

12V halo lamp GU5.3– 38°

230V halo lamp GU10– 30°

Led Lamp 5,5W – 30°

Led Lamp 6,5W – 35°

The above example does not consider a homogeneous light distribution.

The example on the right is based on the following data:- distance: 2,5m

- Area:26m2

- Lux:300

months6 12

1.000hkW

1500

1000

200

150

100

50

230V halolamp GU10– 30°

12V halo lamp GU5.3– 38°

Led Lamp 5,5W – 30°Led Lamp 6,5W – 35°

Spot 4X – 30°Spot 4X – 40°

7

Labeling

Homogeneity of light

The lack of homogeneity of spots placed side by side is one of the typical problems of the LED sources.

To prevent our customers to experience such a problem we add on each product a label with the personal

information with the information about BIN and CCT.

We strive to keep BIN and CCT homogeneous for every single order and delivery.

Should it not be possible this lack of uniformity will be marked inside the packing of delivery.

Type: L=led

R=Round4=No. of led

W=ColourMax current

Led type

Colour temperatureProduction place Lens angle

Bin

CCT

Bin

CCT

8

Drivers in LITELINE Casing:

Ref.No.186158 500mA 496lm +

Ref.No.186159 700mA 663lm

Drivers with Power Factor 0.98:

Ref.No.186200* (built-in)

700mA 663lm + +Ref.No.186201* (indipendent)

Dimmable drivers with Power Factor 0.97:

Ref.No. 186177* (built-in)

700mA 663lm + +Ref.No. 186195* (indipendent)

Drivers

*Remote assembly