Vertical Turbine Pump - multivista-kenya.com

KIRLOSKAR BROTHERS LIMITEDA Kirloskar Group Company

Lift irrigation (Vertical and inclined

mounting)

Water supply

Circulating water for Thermal and

Nuclear Power Plants

Various applications in Steel, Cement

Industries and Refineries

Handling sea water on Off-Shore

Platforms, Dry-Docks

Fire Fighting

Flood Control

Condensate Extraction

RANGE APPLICATIONS

Delivery size up to 2200 mm.

3Capacity up to 55,000 m /hr

Head up to 240 meters

TYPES

Turbine

Mixed Flow

Axial Flow

Propeller

DESCRIPTION

Pumps are of single or multistage, consisting of bowl assembly, column assembly and driving unit assembly.

Variety of models are available to operate at 50Hz and 60 Hz.

Bowl

A diffuser with vanes cast integrally.

Impeller

Impellers are of Francis (BHR), Mixed flow (BHQ, BHM, BHK), Semi-axial (BHMa) and Axial (BHA) type;

enclosed or semi-open depending upon model. In case of condensate extraction pumps, first stage impeller

can have double suction optionally.

Suction bell/Impeller guide piece

Designed for smooth inflow of water with minimum losses.

Shaft

The shaft is of high tensile strength steel.

Column pipe

Either cast or fabricated, it houses line shaft bearings and directs water from bowl assembly to discharge

head/elbow.

Bearings

Transmission bearings :

Cutless bearings are of natural / synthetic rubber / Elastomeric with outer shell of brass or suitable material.

Lubrication by self/external clear water. Oil lubrication with bronze bearing is also available upon request.

Thrust bearing :

Michell Tilting Pad Type or Antifriction type for taking hydraulic axial thrust and weight of rotor assembly.

Lubrication with oil or grease.

Thrust bearing arrangement is available either independently in pump and drive or combined thrust

arrangement in drive.

Discharge head/Discharge tee

To direct flow from column pipe to discharge pipe located above or below ground level with single floor or

two-floor arrangement as per requirement.

Non-reverse ratchet

To prevent reverse rotation of pump due to back flow of the water in case of its tripping, available on request

Motor stool

Rigid construction to ensure vibration-free operation of pumpset.

Coupling

For pump and prime mover flexible or rigid as per requirement.

For line shaft threaded barrel or muff type as per requirement.

Direction of rotation

Clockwise when viewed from driving end.

Drive

Electric motor with vertical hollow/solid shaft is a standard arrangement.

Diesel engine/steam turbine with a right angle gear unit upon request.

High efficiency and low submergence

Hydraulic design is being updated with our continuous R & D efforts to meet requirements of high efficiency

and low submergence, taking care of other parameters, such as high reliability and optimum system design.

GENERAL DIMENSIONS / MOUNTING DETAILS

BHR Pump Water Lubricated Self / External

VT 150, 250, 300BHR 35 and Above

OIL LUBRICATED

WATER LUBRICATEDSELF / EXTERNAL

BHR 28

OIL LUBRICATED


BHR 60 and Above


OIL LUBRICATED

D (max)

DØ

DØ

Note: The weights given are for single stage pumps

Pump Model A(mm) A1(mm) B(mm) C(mm) D(MAX)(mm) F1(mm) F2(mm) N(mm) WT Kg.

approx.

VT150 105 125 - 125 140 - - - 90

VT200 220 - - 190 310 - - 150

VT250 220 - - 190 250 130 - 200 115

VT300 267 - - 185 292 - - 200 150

BHR-28 240 - - 200 500 160 200 500 180

BHR-35 290 - - 300 555 - - 610 360

BHR-42 355 - - 360 645 - - 725 550

BHR-50 420 - - 428 760 - - 760 700

BHR50 R 420 310 - 428 700 - - 760

BHR-54 470 380 - 450 800 - - 780 730

BHR-60 500 400 - 650 800 - - 800 865

BHR-60N - 400 - 355 620 - - 800 900

BHR-65M - 619 117 520 900 - - 800 1380

BHR-70 565 410 - 610 940 - - 950 1280

BHR-70N - 619 148 520 900 - - 800 1380

BHR-70M - 500 370 230 1000 - - 800 1510

BHR-80 - 547 155 570 1060 - - 1000 1450

BHR-95 - 680 265 800 1320 - - 900 3290

BHR-100N - 780 200 665 1010 - - 900 2410

BHR-105 - 750 225 675 1500 - - 900 4630

BHR-115 - 1090 260 920 1550 - - 900 6000


VT 150 500 540 760 980 1200 1420 1640 1860 2080 2300

VT200 500 540 760 980 1200 1420 1640 1860 2080 2300

VT 250 500 250 355 460 565 670 775 880 985 1090

VT 300 500 452 672 892 1112 1332 1552 1770 1992 2212

BHR-28 - 800 1040 1280 1520 1760 2000 2240 2480 2720

BHR-35 1000 / 1500 590 880 1170 1460 1750 2040 - - -

BHR-42 1000 / 1500 715 1070 1425 1780 - - - -

BHR-50 1000 848 1268 1688 - - - - - -

BHR50 R 100 738 1158 1578 1998 - - - - -

BHR-54 1000 830 1300 - - - - - - -

BHR-60 1000 1050 1550 - - - - - - -

BHR-60N 1000 755 1819 - - - - - - -

BHR-65M 1000 1256 - - - - - - - -

BHR-70 1000 1020 1585 - - - - - - -

BHR-70N 1000 1287 - - - - - - - -

BHR-70M 1000 1100 1750 - - - - - - -

BHR-80 1000 1272 - - - - - - - -

BHR-95 1000 1745 2690 - - - - - - -

BHR-100N 1000 1645 - - - - - - - -

BHR-105 1000 1650

BHR-115 1000 2270 - - - - - - - -

Pump E Water L Stages

Model Lub 1 2 3 4 5 6 7 8 9

Pump E Oil L Stages

Model Lub 1 2 3 4 5 6 7 8 9

VT 150 300 540 760 980 1200 1420 1640 1860 2080 2300

VT200 500 540 760 980 1200 1420 1640 1860 2080 2300

VT 250 300 250 355 460 565 670 775 880 985 1090

VT 300 300 452 672 892 1112 1332 1552 1772 1992 2212

BHR-28 400 640 880 1120 1360 1600 1940 2080 2320 2560

BHR-35 400 590 880 1170 1460 1750 2040 - - -

BHR-42 500 715 1070 1425 1780 - - - - -

BHR-50 500 848 1268 1688 - - - - - -

BHR50 R 100 738 1158 1578 1998 - - - - -

BHR-54 600 830 1300 - - - - - - -

BHR-60 600 1050 1550 - - - - - - -

BHR-60N 600 755 - - - - - - -

BHR-65M 800 1256 - - - - - - - -

BHR-70 700 1020 1585 - - - - - - -

BHR-70N 800 1287 - - - - - - - -

BHR-70M 800 1100 1750 - - - - - - -

BHR-80 700 1272 1819 - - - - - - -

BHR-95 800 1147 2690 - - - - - - -

BHR-100N 800 1645 - - - - - - - -

BHR-105 800 1650 - - - - - - - -

BHR-115 800 2270 - - - - - - - -

Note: All dimensions are in mm.


BHM / BHK / BHMa Pump

PUMP MODEL 1 2 Wt. kg.A (mm) B (mm) C (mm) D (mm) N (mm)

BHK40 457 160 360 610 500 977 - 1600

BHK70 780 249 450 1450 900 1479 - 2100

Note: The weights given are for single stage pump. All dimensions are in mm.

Dimensions (BHK Pump)


L STAGES

Dimensions (BHM Pump)


OIL LUBRICATED

BHM-20 216 93 142 348 200 451 760 110

BHM-22. 1/2 250 105 160 440 250 515 870 170

BHM-25 278 294 - 496 300 572 - 235

BHM-30 327 137 215 560 300 679 1143 340

BHM-35 380 160 250 610 350 790 1330 415

BHM-40 432 187 288 750 400 907 1526 540

BHM-45 500 200 320 800 450 1020 1720 650

BHM-45M 500 160 375 800 450 1035 - 710

BHM-50 542 225 355 860 450 1122 1889 830

BHM-50M 542 235 460 1150 450 1237 - 710

BHM-55 596 248 388 875 500 1232 2076 1030

BHM-60 650 270 420 1018 550 1340 2260 1250

BHM-70 755 310 490 1110 700 1555 - 1700

BHM-85 920 375 600 1460 800 1895 - 2580

BHM-100 1090 450 750 1950 850 2290 - 4400

BHM-100M 1090 450 800 2000 - 2340 - 5400

BHM-130 2180 420 700 2450 - 3300 - 12000

L STAGES

Dimensions (BHMa Pump)


L STAGES

Note : The dimensions marked * are tentative.


Dimensions (BHA Pump)

BHA / BHA S Pump

PUMP MODEL Wt. kg.A (mm) B (mm) C (mm) D (mm) N (mm) L STAGES

BHA5 S 300 - 260 680 - 560 630

BHA470 S 290 108 240 785 - 638 600

BHA 700 S 415 155 345 1120 - 915 900

BHA 900 S 540 200 445 1460 - 1185 1200

BHA5 440 124 310 850 - 874 550

BHA100 900 250 700 1800 - 1850 4100

L

C

B

A

D


OIL LUBRICATED

BHMa-25 265 90 196 435 250 551 906 220

BHMa-35 365 123 250 618 450 738 1226 340

BHMa-45 477 163 320 800 450 960 1600 660

BHMa-55 620 210 400 950 560 1230 2060 900

BHMa-60 676 222 452 1050 800 1350 - 1120

BHMa-65 730 240 500 1140 800 1470 - 1325

BHMa-77 800 270 555 1750 800* 1625 2695 2150

BHMa-83 928 303 612 1442 850* 1843 - 2250

BHMa-87 1125 310 615 1520 850* 2050 - 3200

BHMa-100 1034 337 760 2100 900* 2131 - 4560

BHMa-120 1220 400 810 1905 900* 2430 - 5700

BHQ Pump

PUMP MODEL Wt. kg.A (mm) B (mm) C (mm) D (mm) N (mm) L (mm)

Note : All dimensions are in mm. The dimensions marked * are tentative.

BHQ-27 520 140 170 605 300 830 440

BHQ-27M 340 - 370 605 450 710 460

BHQ-32 432 165 205 590 450 802 540

BHQ-37 495 183 232 660 350 910 580

BHQ-42-1/2 590 230 270 670 400 1090 795

BHQ-42 1/2M 775 - 630 815 800 1405 1850

BHQ-45 595 230 280 810 400 1105 880

BHQ-50 680 260 325 1105 500* 1265 1540

BHQ-62 825 335 425 1118 550* 1585 1850

BHQ-70 920 420 555 1800* 600 1740 2100

BHQ-85 1100 1100 - 1526 720* 2200 4800

BHQ-92 1190 478 478 1600 800 2146 6200

BHQ-92A 1245 400 855 1790 900 2500 6600

BHQ-95 1425 1200 - 2200 850* 2625 6900

BHQ-95D 1450 562 785 2200 900 2797 7900


BHQ 37 and AboveWater Lubricated

D

BHQ 27, 50 and 92Water Lubricated

BHQ 37 and AboveOil Lubricated

BHQ 27, 50 and 92Oil Lubricated

Water Lubricated Pumps

BHR Pump

CROSS SECTIONAL VIEW

COLUMN PIPE

MOTOR COUPLING

THRUST BEARING LIDCOOLING COIL

THRUST BEARING HOUSING

RATCHET PINRATCHET COVER

THRUST COLLAR

PUMP COUPLING

DEFLECTOR

STUFFING BOX HOUSINGSPLIT GLAND

IMPELLER NUT

KEY FOR IMPELLER

IMPELLER SHAFT

MUFF COUPLING

STRAINER

BELL MOUTH

IMPELLER

'O' RING

TAPER COL.PIPE

BEARING SPIDER

MOTOR STOOL

RATCHET PIN HOUSING

HEAD SHAFT

GLAND PACKING

DISTANCE PIPE

DISCHARGE HEAD

PUMP BOWL

'O' RING

'O' RING

SPLIT RING

INTERMEDIATE SHAFT

'O' RING

MOTOR

INTERMEDIATE

HEAD SHAFT ENCL TUBE

SHAFT ENCL TUBE

IMPELLERSHAFT ENCL TUBE

SELF WATER LUBRICATION BHR PUMP

EXTERNAL WATERSELF WATER

Oil Lubricated Pumps

BHR Pump


HEAD SHAFT

MUFF COUPLING

HEAD SHAFT ENCLOSING TUBE

BEARING HOLDER

IMPELLER SHAFT ENCLOSING TUBE

DISTANCE PIPE

COLUMN PIPE

TUBE TENSION NUT

ADAPTOR SLEEVE

BRG.BUSH

CARTRIDGE

RATCHET HOUSING

JOURNAL BRG

DISTANCE SLEEVE

RATCHET PIN

DISCHARGE HEAD

THRUST BEARING HOUSING

COOLING COIL

THRUST COLLER

MOTOR STOOL

RATCHET COVER

THURST BEARING LID

MOTOR COUPLING

PUMP COUPLING

IMPELLER SHAFT DISCHARGE CASE

KEY FOR IMPELLER

BEARING BUSH BELL MOUTH

BOWLIMPELLER

'O' RING

SUCTION STRAINER

'O' RING

'O' RING

INTERMEDIATE SHAFT ENCLOSING TUBE

INTERMEDIATE SHAFT

MOTOR

Water Lubricated Pumps

BHQ / BHM / BHK / BHMa Pump


EXTERNAL WATERSELF WATER

COLUMN PIPE

THRUEST BEARING LIDCOOLING COILTHRUEST BEARING HOUSING

PUMP COUPLING

RATCHET COVER

THRUST COLLAR

MOTOR COUPLING

DEFLECTOR

STUFFING BOX HOUSINGSPLIT GLAND

IMPELLER NUT

KEY FOR IMPELLER

IMPELLER SHAFT

MUFF COUPLING

STRAINER

BELL MOUTH

IMPELLER

TAPER COLUMN PIPE

MOTOR STOOL

RATCHET PIN HOUSING

HEAD SHAFT

GLAND PACKING

DISTANCE PIPE

PUMP BOWL

DISCHARGE HEAD

RATCHET PIN

IMPELLER GUIDE PIECE

'O' RING

BEARING HOLDER

'O' RING

'O' RINGBEARING SPIDER

INTERMEDIATE SHAFT

MOTOR


INTERMEDIATE SHAFT ENCLOSING TUBE


SELF WATER LUBRICATION BHM PUMP

Oil Lubricated Pumps

BHQ / BHM / BHK / BHMa Pump

ALTERNATIVES AVAILABLE

BHA Pump

IMPELLER SHAFT

HEAD SHAFT

DISCHARGE HEAD

MUFF COUPLING

RATCHET COVER



CARTRIDGE

TUBE TENSION NUT

DISCHARGE CASE

DISTANCE PIPE

COLUMN PIPE

MOTOR STOOL

RATCHET HOUSING RATCHET PIN

MOTOR COUPLING

PUMP COUPLING

THRUST COLLERTHRUST BEARING LID

COOLING COILTHRUST BEARING HOUSING

COLUMN PIPE

IMPELLER NUT

STRAINER

BELL MOUTH

IMPELLER

BOWL

COLUMN PIPE

INTERMEDIATE SHAFT

BEARING HOLDER

IMPELLER GUIDE PIECE

'O' RING

'O' RING

THRUST BEARING

ENCLOSING TUBE

MOTOR

Pullout Arrangement

Impeller Pullout Arrangement


Bowl Pullout Arrangement

Pullout Arrangement


Two Floor Arrangement

TYPE OF DISCHARGE HEAD

Cast

Fabricated

Fabricated Discharge HeadFabricated Discharge Tee with

Three Piece Elbow

Cast Iron Discharge Head withOuter Barrel Mounted on Elbow

Cast Iron Discharge Tee with Elbow


Dry Pit Arrangement with draft tube

Motor Arrangement

Hollow Shaft Solid Shaft


Condensate Extraction Application

Diffuser TypeBowl Arrangement


Type Of Coupling

Muff Threaded

Engine Driven Pump

MATERIALS

Note : NiCI indicates CI with 1.5% Nickel. Other materials are also available.

CI : Cast Iron

CS : Cast Steel

SS : Stainless Steel

Br : Bronze

Material Of Construction

Bell mouth CI / Ni CI / Brz / Ni Resist / Stainless Steel / Duplex SS / Super Duplex SS

Impeller Guide Piece CI / Ni CI / Ni Resist / CS

Bowl CI / Ni CI / Brz / Ni Resist / Stainless Steel / Duplex SS / Super Duplex SS

Impeller CI / Ni CI / Bronze / Ni Resist / CS / CA 15 / Stainless Steel / Duplex SS / Super Duplex SS

Impeller Shaf t CS / Stainless Steel GRD- SS 304, SS 316, SS 410, SS 416 / K Monel / Duplex SS / Super Duplex SS

Intermediate Shaf t CS / Stainless Steel GRD- SS 304, SS 316, SS 410, SS 416 / K Monel / Duplex SS / Super Duplex SS

Head Shaf t CS / Stainless Steel SS GRD - 304, SS 316, SS 410, SS 416 / K Monel / Duplex SS / Super Duplex SS

Intermediate Shaf t Sleeve Brz /Stainless Steel GRD - SS 304, SS 316, SS 410, SS 416 / K Monel / Duplex SS / Super Duplex SS

Distance Sleeve CI / Brz / Ni CI/ Ni Resist / Stainless Steel / Duplex SS / Super Duplex SS

Column Pipe MS / CI / Ni CI / Ni Resist / SS

Shaf t Enclosing Tube MS / CI / Ni CI / Ni Resist / SS

Discharge Head / Tee MS / CI / Ni CI / Ni Resist / SS

Intermediate Shaf t coupling CS / SS / K Monel

Intermediate shaf t bearing Neoprene Nitrile / Nitrile / Neoprene / LTB

Motor stool MS / CI / Ni CI / Ni Resist / SS

Pump and motor coupling CI / CS- Forged / Forged

Gland CI / Ni CI / Brz / Ni Resist

Strainer MS / SS 316 / K Monel


Type Of Bearing

Michell Antifriction

MATERIALS

Material Type Indian Standard (IS) American standard (ASTM) DIN

Cast Iron

Cast Iron IS 210 Gr. FG 260 ASTM A48 Class 40 (0.6025)DIN 1691 GG25

Spheroidal Graphite Cast Iron

SG Iron (Ductile Iron) IS 1865 Gr 400/15 A536, 60-40-18 (0.7040)DIN1693 GGG40

SG Iron (Ductile Iron) IS 1865 Gr 500/7 A536, 65-45-12 (0.7050)DIN1693 GGG50

Carbon steel

Carbon steel (Wrought) IS 1570 (part II)Gr. 40C8 ASTM A107 Gr. 1040 (1.1186)C40E/CK40

Carbon steel (Wrought) IS 1570 (part II) Gr. 20C8 ASTM A107 Gr. 1020 (1.0402)C22

MS Steel MS IS 2062 - Fe 410 W A ASTM-A283 GR.D DIN 1700 GR ST4-2 FABRICATED STEEL44

Cast Steel Grades

Cast steel ASTMA 216 Gr. WCB 1.0619(GS-C25)

Cast Stainless Steel

Stainless Steel CF8M IS 3444 Gr. 4 ASTMA 351 Gr. CF8M 1.4408(GX5CrNiMo19-11-2)




Stainless Steel CF8 IS 3444 Gr. 1 ASTMA 351 Gr. CF8 1.4301(X5CrNi18-10)

Stainless Steel CF3 IS 3444 Gr. 15 ASTMA 351 Gr. CF3 1.4306(X2CrNi19 11)

Cast Chromium StainlessSteel

Stainless Steel CA15 IS 3444 Gr. 10 ASTMA 217 Gr. CA15 1.4106&1.448(DIN17445 GX12Cr14)

Stainless Steel CA15 IS 3444 Gr. 10 ASTMA 743 Gr. CA15 1.4106&1.448(DIN17445 GX12Cr14)

Stainless Steel CA6NM IS 3444 Gr. 24 ASTMA 487 Gr. CA6NM 1.4313&1.4317(GX5CrNiMo13-4)

Stainless Steel CA6NM IS 3444 Gr. 24 ASTMA 743 Gr. CA6NM 1.4313&1.4317(GX5CrNiMo13-4)

Chromium StainlessSteel Round Bar Matterial

Stainless steel 410 IS 1570 (part V) Gr. X12Cr12 ASTMA 276 type 410 1.4006(X10Cr13)

Stainless steel 420 IS 1570 (part V) Gr. X20Cr13 ASTMA 276 type 420 1.4021(X20Cr13)

Stainless steel 431 IS 1570 (part V) Gr. X15Cr16Ni2 ASTMA 276 type 431 1.4057(X20CrNi17)

Stainless steel 316 IS 1570 (part V) Gr. X04Cr17Ni12Mo2 ASTMA 276 type 316 1.4401(X5CrNiMo17122)

Stainless steel 316L IS 1570 (part V) Gr. X02Cr17Ni12Mo2 ASTMA 276 type316L 1.4404(X2CrNiMo1810)

Cast Duplex Steel

Duplex Steel 1A ASTMA 890 Gr. CD4MCu 25Cr-5Ni-Mo-Cu

Duplex Steel 2A ASTMA 890 Gr. CE8MN 24Cr-10Ni-Mo-N

Duplex Steel 3A ASTMA 890 Gr. CD6MN 25Cr-5Ni-Mo-N

Super Duplex steel 4A ASTMA 890 Gr. CD3MN 25Cr-7Ni-Mo-N

Super Duplex steel 5A ASTMA 890 Gr. CE3MN 24Cr-10Ni-Mo-N

Non Ferious Materials

Bronze IS 318 Gr. LTB2 (CuSn5Zn5Pb5C) ASTMB 584 - C90500 DIN 1705 Rg 5

Phosphor Bronze IS 28 Gr. 1 (CuSn11PC)

Zinc Free Bornze IS 28 Gr. 1 (CuSn10C)

MATERIAL STANDARDS - GENERAL INFORMATION

FAMILY CURVES

50 60 80 100 200 300 400 500 600 800 1000 2000 3000 4000 6000 8000 11000

3

4

6

8

10

20

30

40

60

80

100

2

120

FAMILY CURVES FOR BHR PUMPS (50HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)

NOTE: FIGURES IN BRACKET INDICATE SPEED IN RPM

35-18(960)

28-18(960)

35-18(1450)

28-30(960)

28-30(1450)

35-22.5(960)

35-22.5(1450)

35-30(960)

35-30(1450)

42-18(960)

42-18(1450)

42-22(960)42-30(960)

42-30(1450)

60-18(725)

60-18(960)

60-22.560-30(725)

60-30(960)

54 (980)

50-18(1480)

50-22(1480)

50-30(1480)

60-22(960)

80-3080-18(740)

60N(1450)

70-1870-22.5

80-22.5(740)

70-30 70M(980)

70N(980)

100N(740)

115-30

105-22.5

115-18

105-18

115-22.5

105-30

95-22.595-18(740)

(580)

(480)

(480)

(480)

(580)(580)

(740)

(740)

(990)(990) (990)

VT250 (1450)

65M(990)

(725)

28-18(1450)

80 100 200 300 400 500 600 800 1000 2000 3000 4000 6000 8000 14000

100

3

4

6

8

10

20

30

40

60

80

130

FAMILY CURVES FOR BHR PUMPS (60HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


35-18(1152)

28-18(1152)

28-18(1740)

35-18(1740)

28-30(1152)

28-30(1740)

35-22.5(1152)

35-22.5(1740)

35-30(1152)

35-30(1740)

42-18(1152)

42-18(1740)

42-22(1152)42-30(1152)

42-30(1740)

60-18(870)

60-18(1152)

60-22.560-30(870)

60-30(1152)

54 (1152)50-18(1120)

50-22(1120)

50-30(1120)

60-22(1152)

80-30

80-18(888)70-18 (888)70-2

2.5

(888)

70-30(888)

70M(888)

100N(710)

115-30 (576)105-22.5

115-18

105-18

115-22.5

105-30

80-22.5(888)

95-18(710)

(590)

(576)

(576)

(590)

(590)

(888)

VT250 (1740)

65M(1188)

(870)

95-22.5(710)

CAPACITY IN M /HR3

CAPACITY IN M /HR3

FAMILY CURVES

500 700 1000 2000 3000 4000 5000 6000 8000 10000 20000 30000 4000040000

8

9

10

20

30

40

50

60

7

60

FAMILY CURVES FOR BHQ PUMPS (50HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


85 (480)

90(480)

100 (420)

105 (420)

115

120 (365)

110

27 (1450)

30 (1450)

35 (960) 37 (980)

40 (960)

45 (960)

70 (580)

60 (580)

50 (735)

55 (735)

80 (4

80)

65 (580)

75 (580)

62 (740)42.5 (960)

42.5M (740)

32 (1450)

27M (1450)

92A (490)

92(490)

95 (495)

95D(425)

(365)

(365)

10

20

30

40

50

60 60

700 1000 2000 3000 4000 5000 6000 8000 10000 20000 30000 40000

FAMILY CURVES FOR BHQ PUMPS (60HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


85 (514)

90(576)

105 (440)

115 (438)

120 (396)

110(438)

27 (1740)

30 (1740)

35 (1152)37 (1176)

40 (1152)

70 (590)

60 (696)

50 (882)

55 (710)

80 (5

14)

65 (696)

75 (514)

62 (710)

42.5 (1152)

42.5M (888)

27M (1740)

92A (588)

92(588)

95 (594)

95D(440)

100(440)

CAPACITY IN M /HR3

CAPACITY IN M /HR3

FAMILY CURVES

100 200 300 400 500 600 800 1000 2000 3000 4000 6000 10000 20000 30000 5000050000

2

3

4

5

6

7

8

9 10

20

30

40

1

40

FAMILY CURVES FOR BHM PUMPS (50HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


115 (420)

110 (420)

95(480)

120 (305)

100 (420)90 (480)

77(580)85 (480)

70(580)

70(480)

60(580)

45(960)40(960)

50(725)

30(1450)

25(1450)

20(960)

22.5(960)

25(960)

20(1450)

22.5(1450)

30(960)

35(725)

40(725)

35(960)

50(580)

55(725)

65(480)

40(725)

60(480)

50M(960)

45M(740)

130 (330)

100M

370)

2

3

4

5

6

7

8

10

20

30

40 40

60

50

200 300 400 500 600 800 1000 2000 3000 4000 6000 10000 20000 30000 5000050000

FAMILY CURVES FOR BHM PUMPS (60HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


115 (396)

110 (396)

120 (366)

100 (444)

90 (510)77(576)

85 (510)

70(696)

70(576)

60(696)50(870)

25(1740)

20(1152)

22.5(1152)

25(1152)

20(1740)

22.5(1740)

30(1152)

35(870)

40(870)

35(1152)

50(580)

55(710)

65(576)

45(870)

60(576)

45M(888)

130 (366)

100M (444)

CAPACITY IN M /HR3

CAPACITY IN M /HR3

FAMILY CURVES

300 400 500 600 800 1000 2000 3000 4000 6000 10000 20000 30000 60000

2

3

4

6

8

10

20 20

30

FAMILY CURVES FOR BHMa PUMPS (60HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


22.5(1740)

25(1740)

35(1152)

60(576)

60(696)

40(870)

50(696)

40(1152) 50(870)

65(576)

75(576)

87(5

76)

90(514)

115(444)

110(444)

95(514)

100(504)

120(396)

22.5(1152)

25(1152)

35(870)

35(1152)

45(870)55(696)

70(576)

65(696)

77(576)

83(576)

105(504)

200 300 400 500 600 800 1000 2000 3000 4000 6000 10000 20000 35000

2

3

4

6

8

10

20

1

20

FAMILY CURVES FOR BHMa PUMPS (50HZ)

TO

TA

L H

EA

D IN

ME

TR

ES

(P

ER

STA

GE

)


CAPACITY IN M /HR3

55(725)

22.5(1450)

25(1450)

35(960)

60(480)

30(1450)

45(960)

60(580)

77(580)

100(420)

40(725)

50(580)

40(960)

95(480)

90(480)

50(725)

65(480)

70(580)

75(580)87(480)

105(420)110(420)

115(420)

22.5(960)

35(960)

30(960)

35(725)

70(480)

65(580)

77(480)

83(480) 120(3

65)

CAPACITY IN M /HR3

Kirloskar Brothers Limited (KBL) is a world class pump manufacturing company with expertise in engineering and manufacture of systems for fluid management. Established in 1888 and incorporated in 1920, KBL is the flagship company of the $ 2.1 billion Kirloskar Group. KBL, a market leader, provides complete fluid management solutions for large infrastructure projects in the areas of water supply, power plants, irrigation, oil & gas and marine & defence. We engineer and manufacture industrial, agriculture and domestic pumps, valves and hydro turbines.

In 2003, KBL acquired SPP Pumps, United Kingdom and established SPP INC, Atlanta, USA, as a wholly owned subsidiary of SPP, UK to expand its international presence. In 2007, Kirloskar Brothers International B.V., The Netherlands and Kirloskar Brothers (Thailand) Ltd., a wholly owned subsidiary in Thailand, were incorporated. In 2008, KBL incorporated Kirloskar Brothers Europe B.V. (Kirloskar Pompen B.V. since June 2014), a joint venture between Kirloskar International B.V. and Industrial Pump Group, The Netherlands. In 2010, KBL further consolidated its global position by acquiring Braybar Pumps, South Africa. SPP MENA was established in Egypt in 2012. In 2014, KBL acquired SyncroFlo Inc., the largest independent fabricator of commercial and municipal domestic water booster pumps.

To further strengthen its global position, in 2015, Kirloskar Pompen B.V. acquired Rodelta Pumps International, The Netherlands.

KBL has joint venture cooperation with Ebara, Japan since 1988 for the manufacture of API 610 standard pumps. Kirloskar Corrocoat Private Limited is a joint venture cooperation with Corrocoat, UK since 2006. KBL acquired The Kolhapur Steel Limited in 2007 and Hematic Motors in 2010.

KBL has eight manufacturing facilities in India at Kirloskarvadi, Dewas, Kondhapuri, Shirwal, Sanand, Kaniyur, Kolhapur and Karad. In addition, KBL has global manufacturing and packaging facilities in Egypt, South Africa, Thailand, The Netherlands, United Arab Emirates, United Kingdom and United States of America. KBL has 12,700 channel partners in India and 80 overseas and is supported by best-in-class network of Authorised Centres and Authorised Refurbishment Centres across the country.

All the manufacturing facilities at KBL are certified for ISO 9001, ISO 14001, ISO 50001, BS OHSAS 18001 and SA8000. In addition, the Kirloskarvadi plant is also certified for N & NPT Stamp. KBL's corporate office in Pune is certified for ISO 9001 & Sa8000.

The factories deploy Total Quality Management tools using European Foundation for Quality Management (EFQM) model. The Kirloskarvadi plant of KBL is a state-of-the-art integrated manufacturing facility having Asia's largest hydraulic research centre with

3testing facility upto 5000 kW and 50,000 m /hr.

KBL is the ninth pump manufacturing company in the world to be accredited with the N and NPT certification by American Society of Mechanical Engineers (ASME).

ABOUT KBL

The NetherlandsIndiaSouth AfricaU.S.A.United Kingdom

OUR COMPANIES

KIRLOSKAR BROTHERS LIMITEDA Kirloskar Group Company

Registered Office: Udyog Bhavan, Tilak Road , Pune 411002. Tel: +91(20)24440770Global Headquarters: “Yamuna”, Survey No. 98/(3.7), Baner, Pune 411045. Tel: +91(20)27214444

Email: [email protected], Website: www.kirloskarpumps.com, CIN No.: L29113PN1920PLC000670

Pumps | Valves | Hydro Turbines | Turnkey Projects

Water Resource Management | Irrigation | Power | Industry | Oil & Gas | Marine & Defence | Building & Construction| |

Distribution (Small Pumps) | Valves | Customer Service & Spares

Kirloskar Brothers Limited reserve the right to make alteration from time to time and such our products / equipments may differ from that detail in this publication. For latest information you may get in touch with our Regional Sales Offices.

VT-BHR-BHQ - 06-2016

Documents

Vertical Turbine Pump - multivista-kenya.com