Upload
buianh
View
218
Download
2
Embed Size (px)
Citation preview
VEPAS – Non-MechanicalPolymer Activation System
www.mfsl.ca Page 1 of 5
VEPAS - Polymer Activation SystemsNon-Mechanical Emulsion Polymer Activation System
VEPAS
Marathon’s Polymer Activation System (VEPAS) is a non-mechanical unit designed to fully activate liquid polymer in a single pass with no need of mechanical agitation.
The activated polymer can be immediately added to the sludge or be stored in a tank for aging and/or future use.
Application Example:
www.mfsl.ca Page 2 of 5
VEPAS - Polymer Activation SystemsNon-Mechanical Emulsion Polymer Activation System
VEPAS Manual MODEL ACTIVATION WATER FLOW
VEPAS-2M-250 2.6 LPM (0.7 USGPM)VEPAS-7M-250 7.2 LPM (1.9 USGPM)
VEPAS-11M-250 11.7 LPM (3.1 USGPM)VEPAS-20M-580 20.8 LPM (5.5 USGPM)VEPAS-35M-580 35.2 LPM (9.3 USGPM)
VEPAS-54M-1570 54.9 LPM (14.5 USGPM)VEPAS-107M-1570 107.5 LPM (28.4 USGPM)
MANUAL STANDARD FEATURES:
• 1/60/120V power requirement through standard 15A wall plug
• Neat polymer peristaltic type metering pump
• Water inlet isolation valve
• Water pressure reducing valve
• Water inlet pressure gauge
• Non-mechanical activation device
• Activated polymer pressure gauge
• Activated polymer static mixer
• System outlet isolation valve
• Neat polymer drum rigid suction wand c/w 10' flexible line
• Thermoplastic equipment mounting frame
VEPAS Automatic MODEL ACTIVATION WATER FLOW
VEPAS-2A-250 2.6 LPM (0.7 USGPM)VEPAS-7A-250 7.2 LPM (1.9 USGPM)
VEPAS-11A-250 11.7 LPM (3.1 USGPM)VEPAS-20A-580 20.8 LPM (5.5 USGPM)VEPAS-35A-580 35.2 LPM (9.3 USGPM)
VEPAS-54A-1570 54.9 LPM (14.5 USGPM)VEPAS-107A-1570 107.5 LPM (28.4 USGPM)
AUTOMATIC STANDARD FEATURES:
• All applicable VEPAS Manual Standard Features. Plus:
• Water solenoid control valve
• Water pressure transducer
• Main control panel with PLC for automated process
• HMI touch screen operation
Model Designation
Optional Features CODE DESCRIPTION NOTESBP BOOSTER PUMP SHIPPED LOOSE BF BOOSTER PUMP ON STEEL FRAME BOOSTER PUMP INSTALLED ON FRAME. MUST BE USED WITH ES OPTION.MC MOTOR STARTER OPTION MOTOR STARTER PANEL FOR BOOSTER PUMP (BP OR BF OPTION), SHIPPED LOOSE.MF MOTOR STARTER ON STEEL FRAME MOTOR STARTER FOR BOOSTER PUMP INSTALLED ON FRAME, MUST BE USED WITH ES OPTION.ES STEEL FRAME EPOXY COATED STEEL FRAME. STAINLESS STEEL ALSO AVAILABLE.FM PADDLE FLOW METER FLOW INDICATOR AND FLOW CONTROL VALVE TO MONITOR WATER FLOW.MG MAGNETIC FLOW METER (MAG METER) SHIPPED LOOSE. TS TSS METER SUSPENDED SOLIDS METER (SHIPPED LOOSE).
www.mfsl.ca Page 3 of 5
VEPAS - Polymer Activation SystemsNon-Mechanical Emulsion Polymer Activation System
VEPAS Manual
The manual VEPAS system is designed to be a simple, easy to use system. With its compact design, it can easily be transported to jobsites or used in a permanent installation. Many options are available to meet required operating parameters.
VEPAS Automatic
The automatic VEPAS system is designed as an integrated system to fully automate the wastewater treatment process. These systems are fully customizable based on operating requirements.
Touch screen controls are used on the automatic VEPAS to monitor status, modify system set-points and monitor alarms.
The peristaltic pump uses rollers to „push‰ polymer through a flexible tube. These types of pumps are low- maintenance, extremely reliable and include easy to use controls.
(VEPAS-25M Shown)
(VEPAS Automatic with BF option)
www.mfsl.ca Page 4 of 5
VEPAS - Polymer Activation SystemsNon-Mechanical Emulsion Polymer Activation System
Optional Features
The booster pump options (BP & BF) are available to provide additional inlet water pressure when the supply pressure is not sufficient. The additional pressure will ensure proper polymer activation. The booster pump can be mounted directly on the polymer skid (BF option) or can be provided loose (BP option) for remote installation.
The optional epoxy coated steel frame (ES option) is available as a replacement for the standard thermoplastic frame (stainless steel also available). When mounting the booster pump on the frame (BF option), a steel or stainless steel frame must be used.
The motor starter options (MC & MF) provides a motor starter panel for the booster pump options. The motor starter panel can either be shipped loose or installed on the steel frame.
The paddle wheel flow meter (FM) option provides a method of monitoring and controlling the inlet water flow. The easy-to-read digital display provides an accurate flow rate. The flow rate can be adjusted manually using a globe valve.
www.mfsl.ca Page 5 of 5
VEPAS - Polymer Activation SystemsNon-Mechanical Emulsion Polymer Activation System
The Magnetic Flow Meter option allows visual monitoring of the sludge flow (shipped loose for onsite installation). This is tied into the system PLC on automatic systems.
The TSS meter option provides a mean of monitoring the total suspended solids in the sludge. These measurements are used to ensure solids percentage is within the required specifications, or is tied into the PLC system to automatically adjust polymer dosage with changes to TSS value. (Shipped loose for onsite installation)
Turnkey Solutions
Marathon Custom Design can incorporate the equipment into complete turnkey packages. We have served clients all over the world and offer complete solutions from the planning stage up to final testing/commissioning.
www.mfsl.ca
Marathon’s Promise
Minimize or eliminate engineering time
Competitive advantage based on cost and expertise
Capabilities to leverage large manufacturing facilities
Flexibility in engineering and execution time
Marathon Fluid Systems Limited
88 Albert Street
Moncton, NB E1C 1B1
Canada
T 1 506.860.7867
F 1 506.867.8826
Pump Repair Center
88 Albert Street
Moncton, NB E1C 1B1
Canada
T 1 506.855.2178
F 1 506.867.8826