Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Vendor Center Training Manual
COPYRIGHT & TRADEMARKS Copyright © 2003, 2007, Oracle. All rights reserved. Powered by OnDemand Software. Distributed by Oracle under license from Global Knowledge Software LLC. © 1998-2007. All rights reserved. The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose. If this documentation is delivered to the United States Government or anyone using the documentation on behalf of the United States Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS The U.S. Government’s rights to use, modify, reproduce, release, perform, display, or disclose these training materials are restricted by the terms of the applicable Oracle license agreement and/or the applicable U.S. Government contract. Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
Instructor ManualVendor Center
Page iii
Table of Contents
Vendor Center 1. Vendor Add - Employee ………………………………………...1
2. Vendor Add - Student …………………………………………..12
3. Vendor Add - Supplier (US Citizen or US Corporation) .……...19
4. Vendor Add - Supplier (Non US Company) ……………………33
5. Vendor Add - Supplier Non US Citizen (Non-Resident Aliens) .50
6. Vendor Update - Employee…………………………………..…66
7. Vendor Update - Supplier……………………………………….76
Instructor ManualVendor Center
Page 1
Vendor Center
Vendor Add - Employee The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Add an Employee Vendor record using the Vendor Center. Before entering any employee request, have the employee go through Employee Self Service, to confirm their address information is current and up to date.
Instructor Manual Vendor Center
Page 2
Step Action 1. Click the FOR FACULTY & STAFF link.
2. Click the Vouchers & Vendor Maintenance link to proceed to Vendor Center. Note: The vendor center can also be accessed by clicking on the Travel link.
3. Click the Add / Update Vendors link.
Instructor ManualVendor Center
Page 3
Step Action 4. Two options are available - Update/Search Vendors and
Add Vendor. In this example, we will be adding a vendor "Employee".
Instructor Manual Vendor Center
Page 4
Step Action 5. Click the Add Vendor option.
Instructor ManualVendor Center
Page 5
Step Action 6. There are three Add Vendor options:
-Employee -Supplier -NCSU Student In this example, we will Add Vendor (Employee).
Instructor Manual Vendor Center
Page 6
Step Action 7. Click the Employee option.
8. To review a list of Employee Type classifications, Click the Employee Types link.
Instructor ManualVendor Center
Page 7
Step Action 9. Verify that the vendor request, for individual to be added
as an employee, falls under one of the Employee Types listed.
10. Note: If the individual does not fall under one of the Employee Types listed, click "Cancel" then click "Start Over" to re-enter the vendor request as a Supplier.
11. Click the OK button to return to Add Vendor Form.
12. Two options are available to add an employee: 1 - Employee ID, or 2 - First and Last Name In this example, we will be adding an employee using first and last name option.
13. Enter the First Name field. Enter "Sharon". 14. Enter the Last Name field. Enter "Price".
Instructor Manual Vendor Center
Page 8
Step Action 15. Click the Search button.
Step Action 16. Confirm the search results by verifying the employee ID#
and Department location with your request. 17. If this individual is not listed in search results, click the
'Add' button to add them as a Supplier.
Instructor ManualVendor Center
Page 9
Step Action 18. Because the employee is listed in search results and we
have confirmed accurate, BUT does not have a "Vendor ID", Click the Add Vendor button to proceed. NOTE - If a "Vendor ID" number is provided for the individual in the search results, do not proceed with submitting the add request. Close out & use the Vendor ID number provided. If an update is needed for an existing Vendor ID number, Click "Update Vendor" button next to the vendor ID in the search results. In this example no Vendor ID exists, so Click Add Vendor button.
19. Review the employee information before clicking 'Create
Vendor ID'.
Instructor Manual Vendor Center
Page 10
Step Action 20. Employee address information can not be shown through
the vendor center. Before entering any employee request, have the employee go through Employee Self Service, to confirm that their address information is current and up to date.
21. Click the Create Vendor ID button to submit the Add a Vendor request.
Step Action 22. Confirmation that your request to add a vendor has been
submitted.
23. Note - Process is not complete until Accounts Payable has received all required information and approves request.
Instructor ManualVendor Center
Page 11
Step Action 24. Click the Start Over button to return back to the vendor
center.
25. End of Procedure.
Instructor Manual Vendor Center
Page 12
Vendor Center
Vendor Add - Student The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Add an NCSU Student Vendor record.
Instructor ManualVendor Center
Page 13
Step Action 1. Sign In to MyPack.
Step Action 2. Click the FOR FACULTY & STAFF link.
3. Click the Vouchers & Vendor Maintenance link to proceed to Vendor Center. Note: Vendor Center can also be accessed by clicking the Travel link
4. Click the Add / Update Vendors button.
Instructor Manual Vendor Center
Page 14
Step Action 5. Click the Add Vendor option.
6. Click the NCSU Student option.
Instructor ManualVendor Center
Page 15
Step Action 7. For any active NCSU Student, the student must update
their information through the MyPack Portal.
8. Click the Student Types link for a listing.
Instructor Manual Vendor Center
Page 16
Step Action 9. Click the OK button.
10. If unable to access the MyPack Portal, changes may be submitted to the Registration & Records Office. Click the Address and Phone Change link for the form.
Instructor ManualVendor Center
Page 17
Step Action 11. Example of form.
Click the Close button when finished.
Instructor Manual Vendor Center
Page 18
Step Action 12. Click the Start Over button to return to vendor center.
13. End of Procedure.
Instructor ManualVendor Center
Page 19
Vendor Center
Vendor Add - Supplier (US Citizen or US Corporation) The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Add a Vendor record - Supplier (U.S. Citizen or U.S. Corporation).
Instructor Manual Vendor Center
Page 20
Step Action 1. Begin navigation from the FOR FACULTY & STAFF
link.
2. The new Vendor Center can be accessed by either the Travel link, or the Vouchers & Vendor Maintenance link.
3. Click the Vouchers & Vendor Maintenance link.
4. Click the Add / Update Vendors button.
5. This is the AP Vendor Center. Two options exist: Update/Search Vendors and, Add Vendor.
6. In this example, we will be adding a vendor "Supplier".
7. Click the Add Vendor option.
8. There are three 'Add Vendor' options: -Employee, -Supplier, and -NCSU Student.
9. In this example, we will select 'Add Vendor (Supplier). Click the Supplier option.
10. Click the W-9 and Visa/Passport Requirements link for important information.
11. Note the W-9 Requirements.
12. Note the Visa/Passport Requirements.
13. Note - Vendor Request will not be approved until any required information has been received by Accounts Payable.
Instructor ManualVendor Center
Page 21
Step Action 14. Click the OK button to return to Add Vendor section.
15. Type the name of the vendor to be added into the Vendor
Name field. Example "Streak Free Cleaning".
16. Note - The system will perform a check to see if there are any vendors in the system with the same vendor name upon clicking 'Add'. If the vendor is found, and is the vendor needed, the results will include the vendor ID# to use. Record the ID# found and cancel out of the Add Vendor section then proceed with the vendor ID# provided.
17. Click the Add button to continue.
18. In this example, the system did not find a pre-existing
vendor by the name or combination of names used.
19. The Name 1 field will be populated with the vendor name entered previously.
20. The Name 2 field for 'DBA' (Used mainly for Doing Business As name or Division Name).
21. Residency - Click the US Citizen/Corporation? list.
Instructor Manual Vendor Center
Page 22
Step Action 22. Select 'Yes' or 'No"
Click the list item.
Instructor ManualVendor Center
Page 23
Step Action 23. Click the Tax ID Type list and select appropriate type.
Instructor Manual Vendor Center
Page 24
Step Action 24. Click the Fed ID list item.
Instructor ManualVendor Center
Page 25
Step Action 25. Enter applicable information in the Tax ID field.
Example "075456555".
Instructor Manual Vendor Center
Page 26
Step Action 26. Payment Methods Accepted
Indicate all acceptable forms of payment that the vendor will accept.
Instructor ManualVendor Center
Page 27
Step Action 27. In this example, vendor accepts 'ACH/EFT' & 'Check'.
Click the ACH/EFT option.
28. Click the Check option.
29. Enter type of address (Remit, Ordering, etc.) in the Description field. Example "Remit Address".
30. Select the Country (System will default to USA). Click the Look up Country button.
31. Click the correct Country to return to previous screen. In
this example, 'USA' is the correct Country, so we will Click the Cancel button.
32. Enter vendor information into the Address field.
Example "PO Box 10785".
Instructor Manual Vendor Center
Page 28
Step Action 33. Enter the vendor's information into the City field.
Example "Springfield".
34. Click the Look up State/Prov button.
35. Click appropriate State/Description.
36. Enter the vendor's information into the Postal Code field. Example "65808".
37. Enter the vendor's information into the Phone field. Example "417-466-4842".
38. Enter the vendor's information into the Fax field. Example "417-467-4844".
Instructor ManualVendor Center
Page 29
Step Action 39. Provide an email address when available. If not available,
select 'No Email Provided' checkbox.
Step Action 40. Vendor has no email.
Click the No Email Provided option.
41. Click the scrollbar.
Instructor Manual Vendor Center
Page 30
Step Action 42. Provide any additional information concerning this
vendor request.
Instructor ManualVendor Center
Page 31
Step Action 43. Enter the additional information into the Comments
field. Example "The W-9 for this vendor is being faxed on 4/19/10".
44. Verify that all the information is correct before clicking the I have verified that this information is correct. checkbox.
45. Then Click the I have verified that this information is correct. option.
46. Click the Submit for Approval button to submit request to Accounts Payable vendor processing.
47. Request confirmation screen.
Instructor Manual Vendor Center
Page 32
Step Action 48. Note - The requestor will receive an email notification
once the request has been submitted. The email will contain a Reference ID# that should be used for all inquiries.
49. Note - Approval or Denial of a Vendor Request: The requestor will receive an email notification once the request has been approved or denied.
50. Click the Start Over button to return to Vendor Center.
51. Example of Vendor Add Request email and Reference ID#.
52. End of Procedure.
Instructor ManualVendor Center
Page 33
Vendor Center
Vendor Add - Supplier (Non US Company) The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Add a Vendor record - Supplier (Non U.S. Company).
Instructor Manual Vendor Center
Page 34
Step Action 1. Click the FOR FACULTY & STAFF link.
2. The Travel link or the Vouchers & Vendor Maintenance link will access the vendor center.
3. Click the Vouchers & Vendor Maintenance link.
4. Click the Add / Update Vendors button.
Step Action 5. This is the AP Vendor Center. Two options exist:
Update/Search Vendor, and Add Vendor.
Instructor ManualVendor Center
Page 35
Step Action 6. In this example, we will be adding a vendor "Supplier
(Non US Company)". Click the radio button for Add Vendor.
Instructor Manual Vendor Center
Page 36
Step Action 7. There are three add vendor options:
-Employee, -Supplier, and -NCSU Student
Instructor ManualVendor Center
Page 37
Step Action 8. In this example, we will be adding a vendor "Supplier
(Non US Company)". Click the Supplier option.
9. Click the W-9 and Visa/Passport Requirements link.
10. Note: For Non-US Companies - W-9's are not required. Click the OK button.
11. Type the name of the vendor to be added into the Vendor
Name field. Example "Buyers International".
Instructor Manual Vendor Center
Page 38
Step Action 12. Note: The system will perform a check to see if there are
any vendors in the system with the same vendor name upon clicking 'Add'. If the vendor is found, and is the vendor needed, the results will include the vendor ID# to use. Record the ID# found and cancel out of the Add Vendor section then proceed with the vendor ID# provided
13. Click the Add button to continue.
Step Action 14. In this example, the system did not find a pre-existing
vendor by the name or combination of names used.
15. The Name 1 field will be populated with the vendor name entered previously.
Instructor ManualVendor Center
Page 39
Step Action 16. The Name 2 field for 'DBA' (Used mainly for Doing
Business As name or Division Name).
Step Action 17. Name 2 field 'DBA' Example "Buyers and Sellers
International". 18. Residency - Click the US Citizen/Corporation? list.
Instructor Manual Vendor Center
Page 40
Step Action 19. Select 'Yes' or 'No'.
Click the No list item.
20. Note: For Non-US Companies - W-9's are not required.
21. For Non-US Citizens (Non-Resident Aliens), a copy of their Visa/Passport is required, unless a national from a Visa Waiver participating country.
Instructor ManualVendor Center
Page 41
Step Action 22. Select the Tax ID Type: FID or SSN.
Note: This step is not required for Non-US Companies.
Instructor Manual Vendor Center
Page 42
Step Action 23. Note: The only payment option for Non-US Companies
through the vendor system is via Check. A Foreign Currency Wire or Draft can be requested at the time the voucher is to be set up.
Instructor ManualVendor Center
Page 43
Step Action 24. Click the Check option.
25. Enter type of address (Remit, Ordering, etc.) into the
Description field. Example "Remit".
26. Select the Country. Click the Look up Country button.
27. Scroll down. 28. Click the correct Country to return to previous screen.
In this example, 'Canada' is the correct Country, so we select it.
29. Enter vendor information into the Address field.
Example "125 North Ave".
Instructor Manual Vendor Center
Page 44
Step Action 30. Enter the vendor's information into the City field.
Example "Toronto".
31. Click the Look up State/Prov button.
32. Click appropriate State/Description column. Note: Canada is the only Non-US Country that requires a Province or Territory to be listed in the address.
33. Enter the vendor's information into the Postal Code field. Example "M4B 1B6".
34. Click the scrollbar to scroll down.
Step Action 35. Enter the vendor's information into the Phone field.
Instructor ManualVendor Center
Page 45
Step Action 36. Enter the vendor's information into the Fax field.
37. Provide an email address when available. If not available, select 'No Email Provided' checkbox.
Step Action 38. Vendor has no email. Click the No Email Provided
option.
Instructor Manual Vendor Center
Page 46
Step Action 39. Provide any additional information concerning this
vendor request.
Instructor ManualVendor Center
Page 47
Step Action 40. Verify that all the information is correct before clicking
the I have verified that this information is correct. object.
41. Then Click the I have verified that this information is correct. option.
42. Click the Submit for Approval button to submit request to Accounts Payable vendor processing.
Instructor Manual Vendor Center
Page 48
Step Action 43. Request confirmation screen.
44. Note - Approval or Denial of a Vendor Request: The requestor will receive an email notification once the request has been approved or denied
45. Example of Vendor Add Request email and Reference ID#.
Instructor ManualVendor Center
Page 49
Step Action 46. Click the Start Over button to return to Vendor Center.
47. End of Procedure.
Instructor Manual Vendor Center
Page 50
Vendor Center
Vendor Add - Supplier Non US Citizen (Non-Resident Aliens) The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Add a Vendor record - Supplier, Non US Citizens (Non-Resident Aliens).
Instructor ManualVendor Center
Page 51
Step Action 1. Click the For Faculty & Staff object.
Step Action 2. The new Vendor Center can be accessed by either the
Travel link, or the Vouchers & Vendor Maintenance link.
3. Click the Vouchers & Vendor Maintenance link.
4. Click the Add / Update Vendors button.
Instructor Manual Vendor Center
Page 52
Step Action 5. Two options are available:
-Update/Search Vendors and, -Add Vendor. In this example we will be adding a vendor "Supplier" - Non US Citizens (Non-Resident Aliens). Click the Add Vendor object.
Step Action 6. There are three 'Add Vendor' options:
-Employee, -Supplier, and -NCSU Student.
Instructor ManualVendor Center
Page 53
Step Action 7. In this example, we will Add Vendor "Supplier" - Non
US Citizens (Non-Resident Aliens). Click the Supplier option.
8. W-9 AND VISA/PASSPORT REQUIREMENTS
Note: Vendor Request will not be approved until any required information has been received. Click the W-9 and Visa/Passport Requirements link.
Instructor Manual Vendor Center
Page 54
Step Action 9. Click the link for Visa Waiver Program web site
information.
10. Countries currently participating in the Visa Waiver Program.
11. Click the Close button to return to Vendor Center.
Instructor ManualVendor Center
Page 55
Step Action 12. Click the OK button to return to Add Vendor section.
13. Vendor Name - Type the name of the vendor to be added
into the Vendor Name field. Example "John Doer".
14. Note: The system will perform a check to see if there are any vendors in the system with the same vendor name upon clicking 'Add'. If the vendor is found, and is the vendor needed, the results will include the vendor ID# to use. Record the ID# found and cancel out of the Add Vendor section then proceed with the vendor ID# provided. Click the Add button.
Instructor Manual Vendor Center
Page 56
Step Action 15. In this example, the system did not find a pre-existing
vendor by the name or combination of names used.
16. The Name 1 field will be populated with the vendor name entered previously.
17. The Name 2 field for 'DBA' (Used mainly for Doing Business As name or Division Name).
Instructor ManualVendor Center
Page 57
Step Action 18. Residency - Select 'Yes' or ' No' for the US
Citizen/Corporation? question. NO will be selected in this example.
19. Note: For Non-US Companies - W-9's are not required.
For Non-US Citizens (Non-Resident Aliens), a copy of their Visa/Passport is required, unless a national from a Visa Waive participating country.
20. If the individual is a national from a Visa Waiver participating country, Click the Look up VWP Participating Country button to select the correct country.
21. In this example, 'Spain' is the correct county.
Click appropriate results in Country/Description column.
Instructor Manual Vendor Center
Page 58
Step Action 22. Select Tax ID Type.
Click the Tax ID Type list.
23. Note: This step is not required for Non-US Citizens (Non-Resident Aliens); however, if the individual does have a SSN number it can be entered. In this example, the individual had none. Click the Tax ID Type list.
Step Action 24. Payment Methods Accepted
Indicate all acceptable forms of payment that the vendor will accept.
Instructor ManualVendor Center
Page 59
Step Action 25. Note: The only payment option for Non-US Citizens
(Non-Resident Aliens) through the vendor system is via 'Check'. A Foreign Currency Wire or Draft can be requested at the time the voucher is to be set up. Click the Check option.
26. Enter type of address (Remit, Ordering, etc.) in the
Description field. Example "Remit".
27. Select the Country (System will default to USA). Click the Look up Country button.
28. Find and select the correct country.
Click the scrollbar.
29. Click the scrollbar.
Instructor Manual Vendor Center
Page 60
Step Action 30. Click an entry in the Description column.
31. Enter vendor information into the Address field. Example "Galdiano 6".
32. Enter the vendor's information into the City field. Example "Madrid".
33. Enter the vendor's information into the Postal Code field. Example "28071".
34. Enter the vendor's information into the Phone field. Example "(0034) 912-432-500".
Step Action 35. Enter the vendor's information into the Fax field.
Instructor ManualVendor Center
Page 61
Step Action 36. Click the scrollbar.
Step Action 37. Provide an email address when available. If not available,
select 'No Email Provided' checkbox.
38. Vendor has no email. Click the No Email Provided option for this example.
39. Provide any additional information concerning this vendor request.
Instructor Manual Vendor Center
Page 62
Step Action 40. Enter any additional information into the Comments
field. Example "Copy of Visa sent to AP on 4/19/10".
41. Verify that all the information is correct before clicking the I have verified that this information is correct checkbox.
42. Then Click the I have verified that this information is correct checkbox.
43. Click the Submit for Approval button to submit the request to Accounts Payable vendor processing.
Instructor ManualVendor Center
Page 63
Step Action 44. Request confirmation screen.
45. Note - Approval or Denial of a Vendor Request: The requestor will receive an email notification once the request has been approved or denied.
Instructor Manual Vendor Center
Page 64
Step Action 46. Example of email notification once the request has been
submitted. The email will contain a Reference ID# that should be used for all related inquiries.
Instructor ManualVendor Center
Page 65
Step Action 47. Click the Start Over button to return back to the Vendor
Center.
48. End of Procedure.
Instructor Manual Vendor Center
Page 66
Vendor Center
Vendor Update - Employee The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Update an Employee Vendor record.
Instructor ManualVendor Center
Page 67
Step Action 1. Click the FOR FACULTY & STAFF link.
2. Click the Vouchers & Vendor Maintenance link. Travel link can also be used to access vendor center.
3. Click the Add / Update Vendors button.
4. Click the Update/Search Vendors option.
Step Action 5. A search can be performed by entering 1 of the 3
available options: -Vendor ID -Vendor Name -Employee ID
Instructor Manual Vendor Center
Page 68
Step Action 6. In this example, we will search on the Employee ID
field. Enter "000307977". 7. Click the Search button.
8. Verify the search results to ensure correct Vendor information is listed.
9. Review the 'Vendor Class'.
10. Review the 'Department'.
11. Note: If Employee is not listed in the search results, there are no active HR records for that individual. Modify your search or proceed by clicking the "Start Over" button to add the individual as a Supplier.
Instructor ManualVendor Center
Page 69
Step Action 12. After verifying the vendor information, proceed with
update - Click the Update Vendor button.
13. Select the information to be updated:
-Name -Address/Phone -Email -Classification.
14. Employee Addresses must be updated through
MyPack\Employee Self Service -- Not through the vendor center.
15. Select Email object to update email information.
16. Classification is used to change classification from
employee to supplier, when employee is no longer employed with NCSU.
Instructor Manual Vendor Center
Page 70
Step Action 17. In this example, we will be updating the name.
Click the Name object.
Step Action 18. In this example, we are changing the vendor name -
Yvette R Walker, by removing the middle initial. Enter the new name into the New Name1 field. Enter "Yvette Walker".
19. Provide any additional information concerning the vendor update request into the Comments field. Enter "Employee has no middle initial.".
Instructor ManualVendor Center
Page 71
Step Action 20. Verify that all the information has been entered correctly
before clicking 'Submit Change Request' button.
Instructor Manual Vendor Center
Page 72
Step Action 21. Click the Submit Change Request button.
Instructor ManualVendor Center
Page 73
Step Action 22. Confirmation of your request.
Instructor Manual Vendor Center
Page 74
Step Action 23. Click the Start Over button to return back to the vendor
center.
Instructor ManualVendor Center
Page 75
Step Action 24. Example of an email Vendor System change request.
Use the "Request ID#" provided for all related inquiries. Note - Accounts Payable must review before Approving/Denying. At which time you will receive another email notification of this decision.
25. End of Procedure.
Instructor Manual Vendor Center
Page 76
Vendor Center
Vendor Update - Supplier The new Vendor Center has been added to the Financial System. It will replace the previous Add / Update Vendor page. The Vendor Center should be used to search for existing vendors in the AP vendor file, request new vendors, and update existing vendors. Additional features include enhanced search ability, email notification and duplicate vendor edits. Financial Users with security to requisition, voucher and / or travel entry will have access to the Vendor Center. You can access the Vendor Center (Add / Update Vendors) from the Vouchers & Vendor Maintenance or Travel pages.
Procedure This topic covers how to Update a Supplier Vendor record.
Instructor ManualVendor Center
Page 77
Step Action 1. Click the FOR FACULTY & STAFF link.
2. The Travel link and the Vouchers & Vendor Maintenance link will access the Vendor Center.
3. Click the Vouchers & Vendor Maintenance link.
4. Click the Add / Update Vendors link.
5. Click the Update/Search Vendors option.
Instructor Manual Vendor Center
Page 78
Step Action 6. Perform search by entering 1 of the 3 available options:
-Vendor ID -Vendor Name -Employee ID
Step Action 7. In this example, we will search by Vendor Name field.
Enter "Thomas Scientific". 8. Click the Search button to search the vendor system.
Instructor ManualVendor Center
Page 79
Step Action 9. Verify the search results to ensure correct Vendor Name
is listed.
10. Review the Vendor Name
11. Review Vendor Class.
Instructor Manual Vendor Center
Page 80
Step Action 12. Click the View Addresses link.
Instructor ManualVendor Center
Page 81
Step Action 13. Review the Addresses for Thomas Scientific Inc.
Check to see if the address needed is available before submitting a request to add a new address. If the address is listed, then click "Start Over" to cancel the update request and use the information available. Note - If 'Vendor Name' is not listed in the search results, click the "Add" button to proceed.
14. However, if Vendor Address needed is not listed in the
search results, click the 'Update Vendor' button.
15. Update choices:
-Name -Address/Phone -Email -Classification
Instructor Manual Vendor Center
Page 82
Step Action 16. Click the Name object.
17. Name updates may require an updated W-9 form to be submitted. Click Name option off.
Instructor ManualVendor Center
Page 83
Step Action 18. Point to the Address/Phone object.
19. Point to the Email object.
20. Point to the Classification object.
21. In this example, we will be adding a new address.
Click the Address/Phone option.
22. Click the Select Address to Correct button to verify again that the address needed is not available for this Vendor ID.
23. If Address is found, make a note of the Vendor ID# and
address location. Click "Cancel" to exit out of the vendor center and proceed with setting up voucher.
24. However if Address is not found, Click the Cancel
button.
Instructor Manual Vendor Center
Page 84
Step Action 25. Click the Add New Address button.
26. Description - Enter type of address (i.e., Remit, Ordering) into the Description field. Enter "Remit".
27. Enter the County, or click the Look up Country object and select the country.
28. Enter the new address information into the Address field. Enter "8000 Business Park Drive".
29. Enter the city name into the City field. Enter "Greensboro".
30. Enter the State/Prov, or Click the lookup button and select State/Prov.
31. Click and select NC.
32. Enter the Postal code. Enter "27409".
Instructor ManualVendor Center
Page 85
Step Action 33. Update phone number when applicable.
Instructor Manual Vendor Center
Page 86
Step Action 34. Provide any additional information concerning the vendor
update request into the Comments field. Enter "Received a letter from the vendor with new remittance information. Letter will be forwarded to AP for your records.".
Instructor ManualVendor Center
Page 87
Step Action 35. Verify that all the information has been entered correctly
before 'Submit Change Request'
36. Click the Submit Change Request button.
Instructor Manual Vendor Center
Page 88
Step Action 37. Confirmation that request to update vendor has been
submitted. Request must be Approval by Accounts Payable before it's available in the vendor system.
Instructor ManualVendor Center
Page 89
Step Action 38. Email confirmation of request submitted. Please use
"Request ID# for all inquiries.
Instructor Manual Vendor Center
Page 90
Step Action 39. Click the Start Over button to return to the vendor
center.
40. End of Procedure.