catalogue

index Tools for the anthropometric's measurement

Testing Tools

Tools for testing and setting

Tools for measurement and setting

Antropovelò

Dynavelò Professional

Mep

Dynavelò Basic

Checkboardvelò

Kinematicsvelò �rst level

Kinematicsvelò top level

Barosaddle

Deskmeasurevelò

Measurevelò Kit

Measurevelò

Ischiovelò

Podovelò

Podoreset

Barocheckvelò

3 19

21

23

25

27

29

33

35

14

Softvelò 15

17

7

9

12

13

Performance test

Cornervelò

Velosystem Bike Fitting Centers

37

39

41

12

12

SB 4 Professional

Cornervelò Basic

Pointvelò

Frinchising Velò

Cornervelò Evolution

3

antropovelò

. identify the correct frame size

. identify the setting's parameters

. identify the right position of the shoe/pedal cleats

. identify the right width of the saddle

. identify the right size of the handlebars

. identi�cation of the biomechanics check up

Antropovelò can be used by Biomechanic Technician and cycling Shop Manager.

accessories

dimensions

purpose

ANTROPOVELO’

ISCHIOVELO’

Vertical Panel Base Stand

11 kg20 kg

1 kg

225 cm 45 cm

58 cm58 cm

3 cm3 cm

35 cm

35 cm

31 cm

45 cm 45 cm

PODOVELO’

PODORESET

7 cm 30 cm

30 cm2 cm1,5 kg

Antropovelò is a Biomechanic software system to take accurate anthropometric measurements,resulting in the ability to:

SOFTVELò - Biomechanic softwareMEASUREVELò – caliber for anthropometric's measurementISCHIOVELò – meter for the sciatic supportPODOVELò – meter for the measuremen of the heel - metatarsalBARVELò – bar for �exibility measurement INTERACTIVE CD for easy learningTRAINING COURSE

4

antropovelò Antropovelò takes exactly all the anthropometric measurements in a manual mode.

The innovative features of Antropovelò are represented by:

- electronic detection of anthropometric measurement

- description available for both genders

- professional image

- ensures each reporting of data reliability after 3000 cycling reports

What does it measure ?

Total heightCrotch’s heightTrunk lenghtShoulder widthArm width

Forearm widthFemur lenghtTibia lenghtDHM - Distance heel - metatarsalWSS - Width of sciatic support

5

antropovelò

6

antropovelò

7

Measurevelò is a calibration aid for anthropometric and biomechanics measurement. Furthermore, it gives you the possibility to take the frame's measurement and bike set-up.

Measurevelò is included in the kit. It could be sold individually, but it is equipped with the main tools too.

- extreme manageability and easy to use

- accurate frame measurement

- accurate bike set up

measurevelò

Features

8

ANTHROPOMETRIC MEASUREMENT BIOMECHANICS MEASUREMENT

measurevelò

Stem lenght

Shoulder width

Arms lenght

Forearm lenght

Femur lenght

Tibia lenght

Crossbar

Seat tube

Front rake

Back rake

Seat height

The fore aft saddle position

Distance between seat and handle center

Distance between seat and handlebar

Distance between seat and levers

Di�erence between seat and toe clip

9

Ischiovelò is a system to record an accurate anthropometric mea-surement of the sciatic support, the result being to identify the right saddle.

The sciatic bones, right and left, are the supports of the pelvis whilst sitting.The distance between the the 2 bones lets you know which is the right size for your seat.

ISCHIOVELO’ is a special sitting arranged to put on a speci�c dis-posable tester.

- extreme manageability and easy to use

- Moderate measurement for both genders

Features

ischiovelò

10

Purpose

You can choose between the seats available commercially which is the right one to suit your physical structure

ischiovelò

11

ischiovelò Tester

ISCHIOVELO’ TESTER is a disposable tester used to identify the right saddle design for the cyclist

It is a special corrugated, printed board, used to take a ischiatic print. The result will be processed by a default list to identify the right seat model.

Purpose

Package

This system helps to take the correct measurement of the sciatic support, �nalized to know the size of pelvis

50 Ischiovelò Tester1 Computation table with the measurements of the saddles.

12

podovelò

PODOVELO’ is a measurement system for the distance between heel and metatarsus.

It is composed of a plexiglass table and 2 cursors for the measurement process.

Features

PurposeIt is essential for the setting and positioning of the shoe cleats.

13

podoreset

PODORESET is a table to test the symmetry of feet and knees.

Features

Purpose

PODORESET is composed of a forex table and a rear support.

What does it measure?

This system helps to �nd asymmetry of the foot and the leg and �nd even-tual dysmorphismes.

It measures the length of the foot and the asymmetry of the leg.

14

BaroIschiometria Dinamica

R i levazione dinamica del l ’ ap-poggio del ramo ischio-pubico del bacino durante la pedalata

barosaddlevelò

Barosaddlevelò is a sensor system attached to the seat to assess the pelvic pressure whilst cycling.

Features

Information is gathered by use of a seat sensor, a special sock that doesn't alter the riders position during use. The BaroSaddleVelò System assesses the quantity and quality of the support for the pelvis on the seat during cycling.

Software

- testing of the High/Low pressure, contact time and full time pressure

- movies of the pressure

- testing by sector: right/left, front/back and personal sectors

15

softvelò

Softvelò is an anthropometric cycling software system.

It is professional software for technical and biomechanics man-agement, for single or groups of cyclists, but under technician control.

Features The use of the software is simple, intuitive and includes the following features: :

- Cycling costumer data- Anthropometric measurements directories- Anthropometric measurements data- Data storage of the frame and the setting- Possibility to prints the information with your personal logo

16

softvelò

Applications

This is a professional software system for technical and biomechanics management, for single or groups of cyclists, designed for use under technician control (mechanic, biomechanics, bike shop manager and bike team manager).

This management software can be used for storing cycling technical information (single or team), includes the archiving of the sizes (frame, components and setting), physical sizes, bike maintenance, cycling events (amateurs and professional) .

17

barocheckvelò

Barocheckvelò is a barometric platform.

In the �eld of cycling biomechanics, Barocheckvelò evaluates baro-pomodometric information in static, dynamic and also baroischio-metric form.

Features

Purpose

Dimensioni

Sensori

70 cm 50cm 0,5cm

Numero totale 2304 dim.

Densità 1x2cm

Tool allows you to de�ne the characteristics of the plantar to realize the ergonomic custom insoles. The evaluation of the sciatic support allows you to de�ne the size of the ideal saddle.

18

barocheckvelò Features

Professional Use

The BaroCheckVelò platform simpli�es the measurement process of the sciatic support and foot support in static and dynamic conditions and in both directions. Another used is the assessment of the barycentre movement.

It is used in biomechanic lab and also as sale support of saddles and ergonomic plantar.

19

measurevelò kit

Measurvelò kit is a kit for the measurement of the bike frame and for the bike set up.

Features

Purpose

It can be used for measurements and quick setting up of the bike for both leisure, amateur and professional cyclists. It can:

Measure the body segments

Check the setting measurements

Check the frame measurements

Easy to handle and use

Equipped to take all the setting measurements

User manual and details sheets

20

measurevelò kit

Accessories included

Box Sizes

For who is it?

Levelvelò Metrovelò Markervelò Plombvelò

Measurevelò kit can also be used for cyclists who want the correct bike set up.

1,23kg 71cm 24,5cm 6cm

21

deskmeasurevelò

Deskmeasurevelò is a professional bench for the measurement and control of the bicycle frame and setting.

Features

Purpose

Measures

It improves the accuracy, speed of measurement and control of the bike therefore raising the quality, reliability and ensuring a professional �tting service.

125 cm 35 cm 95 cm 195 cm

49,2

Measuring the geometry of the frame

Measurement of buoyancy setting

Setting control parameters

Extreme manageability

22

deskmeasurevelò

Horizontal length

Seat height

O�set column

Height head tube

Your steering angle

Front wagonrear wheelbase

Misurazioni possibili

Seat height

Saddle setback

Di�erence seat - attack

Saddle-handlebar distance

Saddle-brake lever distance

23

checkboardvelò

This is a portable workstation for control and veri�cation of the cyclists setting both whilst stationary and pedaling.

Features

Purpose

It consists of a foldable PVC base, with special graphics and other elements that may be �tted:

3 sliding tracks with special supports and a professional self-leveling laser.

1 CICLOTRAINER (turbo trainer) CRONO FLUID specially posi-tioned.

Accessories and testing equipment to measure the angles at the knee and shoulder.

Checkboardvelò allows the control and improves the posture of the rider during pedaling.

24

checkboardvelò

It does checking and testing the front and side settingThis checks and tests the position from both the side and front to optimize the riders position

FRONT LATERAL

seat heightsaddle setback di�erence seat - handlebar distance saddle - handlebar

Professional Use

CheckBoard Pack

Check boardvelò can be used for technical and biomechanics man-agement, for single or groups of cyclists, designed for use under technician control (mechanic, biomechanics, bike shop manager and bike team manager).

Boardvelò

Laservelò

Crono�uid

knee alignment to the center pedalankle foot alignment to the center pedalhip alignment to the center pedalalignment symmetry left and right

Training Course

CPS

dynavelò basic

Dynavelò basic power is a biomechanical simulator which is able to measure the power of the cyclist

Features

Simulation and verification

Dynavelò basic power is a biomechanical simulator which is able to give at the technician or the bike shop manager the cy-clists power output.

Dynamo Basic Power is able to reproduce and modify the setting conditions of: saddle height and setback di�erence , saddle handle-bar distance , saddle handlebarcrank length , seat width , handlebar width.

The changes are only possible if the cyclist is stopped and not whilst in motion.The front laser check optimizes the alignment of the cyclist from the front and side.

25

26

dynavelò basic

Purpose

Included accessories

Measures

Permette di valutare e modi�care verso l’ottimizzazione tutti i parametri di assetto del ciclista con la �nalità di migliorare comfort e prestazione e di individuare il telaio ideale.

1 tester Degreevelò2 Laservelò1 Powercheck

140cm 50cm 165cm50 kg

27

dynavelò professional

Dynavelò Professional is a biomechanical training simulator able to change the cyclist setting during pedaling and mea-sure e�ciency by monitoring the data.

Features

Simulation and verification

Purpose

The technician is able to assess the e�ciency and biome-chanical setting through a simulation.

The dynamic set-up during the ride are:height and setback of saddle, di�erence of height between handlebar saddle (drop), saddle handlebar distance.

To be able to check and modify all the setting pa-rameters of the cyclist improving the comfort and performance to assist in �nding the ideal frame.

28

dynavelò professional

Included accessories

Professional use

1 Degreevelò tester2 laser Velò SRM training system + online version + pedaling tester + clips ( 160 -180 mm )

It can be used by biomechanics technician and shop manager with service center.

Measures

70 kg 160cm 50cm 165cm

29

mep

Features

The MEP (meter e�ciency pedaling) is an innovative piece of equipment for measuring biomechanical parameters. The elec-tronic system includes electronic clips and a PDA and software

EP system controls the parameters of the clips/pedal cleats on the right and left and draws the following values :

Power (Newton) pushing down and pulling up with the report detailing % UP / DOWN

Posture (mm OFFSET) indicates the position of thrust in all con-ditions

Power (WATT) individually through each leg/pedal cleat and also the total combined wattage/power.

Kilojoule (Kj) these parameters are correlated with other

parameters wich are:

Hartbeat: pulses per minute

Speed: (KM/h)

Cadence: (giri/min) other details are on computer with gps

30

EP system controls the parameters of the clips/pedal cleats on the right and left and draws the following values :

Power (Newton) pushing down and pulling up with the report detailing % UP / DOWN

Posture (mm OFFSET) indicates the position of thrust in all con-ditions

Power (WATT) individually through each leg/pedal cleat and also the total combined wattage/power.

Kilojoule (Kj) these parameters are correlated with other

parameters wich are:

Hartbeat: pulses per minute

Speed: (KM/h)

Cadence: (giri/min) other details are on computer with gps

mep Evaluation and analysis

All the details are held on the PDA on which it is possible to control all the param-eters, analyze and record all the tours and view them on the computer (GRAPH and STATISTIC)Pressing the button NEXT and START/STOP on MULTIFUNZIONE and TOUCH SCREEN you have the possibility operate a lot of settings: for example change the screen and record the test and the trainings, technical notes, which are inputted in the relative �les.

2 Clips/pedal cleats, right and left, distances from 170 to 180 mm with electronic tools and quick connectionChainrings adaptable to di�erent types BCD (110, 139, 135 etc…)Linchpin of connection, integrated connectors, available in standard sizesCardio/heart rate monitor strapCadence sensorSmartphone, with software to view and record system, with a handlebar mounting bracketBattery charger 220 VAC (more or less 3 h for completing charging of system)

Specifications

!

31

The software For more accurate and detailed analy-

sis, in addition to smartphone view

and record, the software is able to

manage all the details on your com-

puter (not only with the PDA) which,

in addition to connecting with your

smartphone, can also be used direct.

The software can be used on line and

is completely dynamic, versatile and

able to adapt to customer needs.

!

mep

32

2 Clips/pedal cleats, right and left, distances from 170 to 180 mm with electronic tools and quick connectionChainrings adaptable to di�erent types BCD (110, 139, 135 etc…)Linchpin of connection, integrated connectors, available in standard sizesCardio/heart rate monitor strapCadence sensorSmartphone, with software to view and record system, with a handlebar mounting bracketBattery charger 220 VAC (more or less 3 h for completing charging of system)

!

mep

33

Operative Pack

kinematicsvelò first level

Kynematicsvelò First Level it a package which includes a

Dart�shlive software, install and calibration images, opera-

tional and training protocols.

Velosystem choose Dart�sh live as Platform for its software

to analyze the cyclist conditions out and indoors. It can be

easily be used by Team manager, biomechanics technician

and team builders.

Kinematicsvelò First Level is one of the most important

tools used by Velosystem to analyze the pedaling

technique/motion to improve the biomechanic setting of

the road cyclist, mountain biker or triathlete.

Le caratteristiche del KinematicsVelò_First_Level sono rappresentate da una serie di elementi capaci di fornire all’operatore un pacchetto di analisi cin-ematica chiavi in mano:

• Progettazione allestimento• Installazione dispositivi acquisizione video• Licenza Software Dartfish Live per singolo dispositivo• Protocollo operativo analisi cinematica• Formazione Base (ore 4)

34

kinematicsvelò first level

Kin

em

atic

sVe

lò

070

70

60

60

50

50

40

40

30

30

20

20

10

10

35

Operative Pack

kinematicsvelò top level

Kynematicsvelò top level is a superior version of the �rst

level. Upgrades include the installation and calibration of

imaging devices DARTFISH PRO SUITE. This platform is

more evolved and compliant, suitable for more detailed

technical bike set up and for those who wish to have a more

comprehensive package than the First Level version.

Kynematicsvelò top level is more advanced than First Level and includes the following:

Design and construction MULTICAMDevice setup videoDart�sh PRO SUITE software license for single deviceAdvanced Test ProcedureBasic Training course (4 hours)

36

Kin

em

atic

sVe

lò

070

70

60

60

50

50

40

40

30

30

20

20

10

10

kinematicsvelò top level

37

Features

ergovelò sb4

Ergovelò SB4is a professional bike-simulator for the athletic test.

This version is dedicated to the most demanding technician.It is able to monitor and record the speci�c �tness testing, for example the anaerobic test threshold with increasing WATTAGE and SPEED, the test of power (for 10 seconds and 250 meters).It is connected to the computer for on-line monitoring and data recording with speci�c soft-ware.

Elastic System Swing:Unique system able to make swinging the bicycle with-out the front wheel and fork block possible. The frame protection is guaranteed.

38

ergovelò sb4

Sizes Specifications

180cm 520cm 121cm60kg

Electromagnetic brake:tested, calibrated and calibratable, reliable, with-out maintenance and quiet

Volano: heavy and with high number of turns, it repro-duces exactly the activity between man-bicycle

On-board computer: easy and intuitive on 32-bit softwareBright dis-play with backlit LCD screenWheel clamping: for any slippage and tire punctures

Custom Calibration

Customizing the coe�cients

39

Services

cornervelò basic

The Cornervelòbasic is a space in the bike bike shop where you can promote your biomechanics services.

The corner velò is set up with professional and advanced tools, there is a data management software that is con-stantly updated and supplemented by a protocol. This corner is made after technical training for the use of instru-ments, software and services of the biomechanics.

Biomechanical professional service

System reliability

Tools, software and protocol are the result of more than 3000 cycle tests with people of every age, gender and level/ability. All cyclists were submitted to anthropometric measurements and were compared with other test results.The data extracted and integrated into the software have con�rmed the reliability of the system and con�rmed that the results of the ideal frame and setting are exact.

The space takes only 2m x 2m and in this corner you can take the measurement of the cyclist for a professional search to establish the right frame size.

40

cornervelò basic

CYCLIST MEASUREMENT

IDEAL FRAME

CUSTOM SETTING

41

Cornervelo requires only 2m x 2m, and in this space you can take the measurements of the cyclist fora professional search for the right frame size using the equipped Deskmeasurevelò software/program-me.3m x 2m space is required for the professional measurement service for the cyclist to �nd the ideal frame and the right settings established by Precision Bench

Services

Easy to use

Sale motivation

Media

cornervelò evolution

Tools and software are designed to make simplify each biomechanics operation, with great professionalism. Fol-lowing the training course the technician is ready to use the system.

The Cornervelò is a valid visual aid to assist the sale of bicycles because it helps toreassure the customer that their choice of equipment (frame or bike) is correct through a detailed technical and professional �tting service.

The Cornervelò in-store display unit is equipped with a monitor which attracts the attention of the visitors in the shop. The station is equipped with a presentation program.

42

cornervelò evolution

MEASURE OF THE CYCLIST

IDEAL FRAME

PERSONALIZED SET

TRACK ALIGNMENT

43

What ?

Who ?

bike fitting centers

The Bike �tting centers are Velosystem’s Accredited Centers which o�er services and technical products for the health and the optimum performance of the cyclist.There are 2 kind of centres: Pointvelò and FranchisingVelò.The Key Feature of a Velosystem center is the service quality, continuous research, professionalism and competence of the products o�ered.

Products and services o�ered by a Bike Fitting Center are:

Biomechanics consultancy

Consulting service training

Technology products for health and performance

The technical manager of a Bike Fitting Velosystem center must display and have competence, passion and empathy. His professionalism is supported by training, constant support, and technical updates from the technicians at Velo-system.

44

Where ?

How much does it cost?

bike fitting centers

The minumun space required for a Pointvelò and for a FranchisingVelò must be from 30 square meters an up to 40 square meters.

The �rst investment is approximately a Pointvelò is between 7,000 and 13,000 euros. instead Franchisingvelò from

15,000 until 25,000 euros

Franchisingvelò’s contract is protected by an exclusive contract and the duration for the Pointvelò Franchis-

ingvelò is for a minimum of 2 or 3 years and is renewable thereafter.

The cost of Bike Fitting Centers Velosystem assistance is included in the �rst year of the contract, from the second

year for the Pointvelò the cost is 900 euros + VAT yearly and for the Franchisingvelò 1200 euros + VAT yearly

The price includes the advertising campaign the license to use the logo as well as ongoing technical assistance

and technical updates

45

Velosystem support

bike fitting centers

Technical training, constant updates (2 sessions per year approximately) Training and/or management consulting Technical management software Initial support and marketing strategy Advertising on the most popular bike’s magazines Web communication Business Plan.

BE DIFFERENT.

BECOME A VELOSYSTEM BFC

www.velosystem.com