3
VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, Seri Manjung, 32040 Lumut, Perak Darul Ridzuan, Malaysia. VALE Schedule of RAC Training RAC DATE/TIME VENUE BASIC CONTENTS TARGET GROUP REFRESHER RAC Induction Every Tuesday & Thursday, 2 to 3 pm VALE Training Center RAC Overview and Requirements All VALE, A & T, MRM Personnel 6 Months RAC - 1 Working at Heights 21/7/2012 Saturday 9am to 1pm VALE Training Center 1. Risk Prevention on Working at Height 2. Safety Equipment 3. Safety Equipment Inspection 4. Care with Pre-Operation and Execution 1. All Personnel Working at Heights above 1.8m 2. Scaffold Erectors and Dismantlers 6 Months RAC - 2 Automotive Vehicles 28/7/2012 Saturday 9am to 5pm VALE Training Center 1. Vans, Cargo Vehicles, Minibuses and Buses required safety features 2. Procedures 3. Driving within Vale site 4. Defensive Driving 1. All Personnel Driving at VALE Site 6 Months RAC - 3 Mobile Machinery 4/8/2012 Saturday 9am to 1pm VALE Training Center 1. General Concepts on Movable Equipment. 2. Safety Equipment for Movable Equipment Operation. 3. Pre-Operation. 4. Operation. 5. Release Procedures and Responsibilities. 6. Emergency plan. 1. All Operators of Mobile Machinery Cranes, Forklift, Trucks etc. 2. Maintenance Personnel for Mobile Machinery 6 Months RAC - 4 Shutdown and Signage 11/8/2012 Saturday 9am to 1pm VALE Training Center 1. Energy Risk and Damage 2. Procedures for Blockade and Signaling 3. Energy Blockade Activities Steps 1.All Personnel Performing Shutdown of Energy Sources (Mechanical, Hydraulic, Pneumatic, Chemical and Thermal Sources) 6 Months

VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, …enigmamutiara.com/Rac_Training_Schedule.pdf · VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, Seri Manjung, 32040 Lumut, Perak

Embed Size (px)

Citation preview

Page 1: VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, …enigmamutiara.com/Rac_Training_Schedule.pdf · VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, Seri Manjung, 32040 Lumut, Perak

VALE Malaysia Manufacturing Sdn Bhd

Teluk Rubiah, Seri Manjung,

32040 Lumut, Perak Darul Ridzuan,

Malaysia.

VALE Schedule of RAC Training RAC DATE/TIME VENUE BASIC CONTENTS TARGET GROUP

REFRESHER

RAC Induction Every Tuesday & Thursday, 2 to 3 pm

VALE Training Center

RAC Overview and Requirements All VALE, A & T, MRM Personnel

6 Months

RAC - 1 Working at Heights

21/7/2012 Saturday

9am to 1pm

VALE Training Center

1. Risk Prevention on Working at Height 2. Safety Equipment 3. Safety Equipment Inspection 4. Care with Pre-Operation and Execution

1. All Personnel Working at Heights above 1.8m 2. Scaffold Erectors and Dismantlers

6 Months

RAC - 2 Automotive Vehicles

28/7/2012 Saturday

9am to 5pm

VALE Training Center

1. Vans, Cargo Vehicles, Minibuses and Buses required safety features 2. Procedures 3. Driving within Vale site 4. Defensive Driving

1. All Personnel Driving at VALE Site

6 Months

RAC - 3 Mobile Machinery

4/8/2012 Saturday

9am to 1pm

VALE Training Center

1. General Concepts on Movable Equipment. 2. Safety Equipment for Movable Equipment Operation. 3. Pre-Operation. 4. Operation. 5. Release Procedures and Responsibilities. 6. Emergency plan.

1. All Operators of Mobile Machinery – Cranes, Forklift, Trucks etc. 2. Maintenance Personnel for Mobile Machinery

6 Months

RAC - 4 Shutdown and Signage

11/8/2012 Saturday

9am to 1pm

VALE Training Center

1. Energy Risk and Damage 2. Procedures for Blockade and Signaling 3. Energy Blockade Activities Steps

1.All Personnel Performing Shutdown of Energy Sources (Mechanical, Hydraulic, Pneumatic, Chemical and Thermal Sources)

6 Months

Page 2: VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, …enigmamutiara.com/Rac_Training_Schedule.pdf · VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, Seri Manjung, 32040 Lumut, Perak

VALE Malaysia Manufacturing Sdn Bhd

Teluk Rubiah, Seri Manjung,

32040 Lumut, Perak Darul Ridzuan,

Malaysia.

RAC - 5 Cargo Handling

18/8/2012 Saturday

9am to 5pm

VALE Training Center

1. Transport Types 2. Risks and Control Types per Equipment 3. Personnel Requirements and Documentation 4. Rigging Plan 5. Pre-operation 6. Operation

1. All Personnel involved in Hoisting, Moving/ Transporting Cargo using Mobile Machinery, Cranes, and other Mode of Transport

6 Months

RAC - 6 Confined Space

25/8/2012 Saturday

9am to 5pm

VALE Training Center

Watchmen and Authorized Employees 1. What are Confined Spaces? 2. Identification and Use of Risk Control Equipment used in Confined Spaces. 3. Entry and Removal Equipments in Confined Spaces: EPIs e EPCs. 4. Communication in Confined Spaces. 5. Pre-Operation. 6. Operations. 7. Rescue Operations. Entrance Supervisor 1. What are Confined Spaces? 2. How to identify confined spaces? 3. Safe Practices in Confined Spaces 4. Identification and Equipment Use on Risk Control in Confined Space 5. Confined Space Entrance and Exit Equipment: EPIs e EPCs. 6. Confined Space Communications. 7. Entrance License System (PET) 8. Pre-Operation. 9. Operations. 10. Rescue Operations.

1. All Personnel Performing Work in Confined Spaces and Authorizing Confined Space Work

H&S Manager, H&S Officer,

Project Site Manager,

Supervisor

6 Months

6 Months

Page 3: VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, …enigmamutiara.com/Rac_Training_Schedule.pdf · VALE Malaysia Manufacturing Sdn Bhd Teluk Rubiah, Seri Manjung, 32040 Lumut, Perak

VALE Malaysia Manufacturing Sdn Bhd

Teluk Rubiah, Seri Manjung,

32040 Lumut, Perak Darul Ridzuan,

Malaysia.

RAC - 7 Machinery Protection

1/9/2012 Saturday

9am to 1pm

VALE Training Center

1. Machine Protection 2. Protection Controlled Danger 3. Pre-Operation, Operation and Maintenance Plan 4. Safety Devices

1. All Personnel Working and Approving Work Related to Rotating Machinery

6 Months

RAC - 8 Slope Stabilization

8/9/2012 Saturday

9am to 1pm

VALE Training Center

1. General Concept of Slope Stability 2. Tailing Dams and Waste Dumps 3. Slope Monitoring and Control 4. Slopes Stabilization and Contention

1. All Personnel who perform Slope Stabilization Activities

6 Months

RAC - 9 Explosives and Detonation

15/9/2012 Saturday

9am to 1pm

VALE Training Center

1. General Concepts Related to Explosives Detonation 2. Identification and Risk Control 3. Caution with the Vehicles 4. Caution with Pre-operation, Operation and Post-operation of Explosives

1. All Personnel involved in Handling, Manufacturing, Transporting, Storage and Detonation of Explosives including The Loading of Bore Holes

6 Months

RAC - 10 Hazardous Chemical Products

22/9/2012 Saturday

9am to 1pm

VALE Training Center

1. General Concepts 2. Signaling 3. Card 4. Storage and Transportation 5. Safety Equipments

1. All Personnel involved in Handling, Internal Transportation and Storage of Hazardous Chemicals Products in any Physical State (Solid, Liquid or Gas)

6 Months

RAC – 11 Working with Electricity

29/9/2012 Saturday

9am to 5pm

VALE Training Center

1. Labor Accidents with Electricity 2. Risks in Electrical Installations 3. Protection Against risks in Electrical Installations 4. Requirements to Work with Electricity 5. Pre-Operation, Operation and Maintenance Plan 6. Protection Tools 7. Safety Equipments

1. All Personnel involved in the Areas of Generation, Transmission, Distribution and Consumption

6 Months