v6 Injection Programming

Embed Size (px)

Citation preview

  • 7/31/2019 v6 Injection Programming

    1/2

    GREEN TECHNICAL NOTE

    EDITION ANGLAISE7

    Service 00429

    NOVEMBER 2004

    77 11 326 502

    CLIO 2 V6 Phase 2

    LAGUNA II

    AVANTIME

    with L7X 721 722 731 762 engine

    Production cut-offsType

    CB1 U

    BG0 D

    BG0 Y

    BG0 1

    BG0 2

    KG0 D

    KG0 2

    DE0 T

    K 032725 to K 044967

    S 521156 to S 648919

    S 605001 to S 654769

    S 300409 to S 655502

    S 498393 to S 614440

    S 401198 to S 470397

    S 383678 to S 452698

    T 000047 to T 004415

    Engine: Gearbox:

    17B REPROGRAMMING THE INJECTION COMPUTER: ERRATIC ACCELERATIONAND INJECTION WARNING LIGHT COMES ON

    Other sub-section concerned: 83A

    L7X 721 722 731 762

    XXX

    Basic manual:

    Technical Note: 3585A

    "The repair procedures given by the manufacturer in this document are based on thetechnical specifications current when it was prepared.

    The methods may be modified as a result of changes introduced by the manufacturerin the production of the various component units and accessories from which hisvehicles are constructed".

    All copyrights reserved by RENAULT.

    Copying or translating, in part or in full, of this document or use of the service partreference numbering system is forbidden without the prior written authority ofRENAULT.

    RENAULT 2004

  • 7/31/2019 v6 Injection Programming

    2/2

    PETROL INJECTION SYSTEM

    Injection programming 17B

    17B-2

    117BPETROL INJECTION SYSTEMInjection programming

    TECHNICAL INFORMATION

    Customer complaint

    Injection warning light comes on.

    Erratic acceleration.

    Possible cause

    Injection computer programming.

    Fault finding

    Confirm the customer complaint

    No fault codes are displayed on the diagnostic tool.

    Check the internal part number of the injection

    computer using the diagnostic tool.

    This Technical Note only applies to the following

    injection computer part numbers:

    Description of the operation

    Reprogram the injection computer according toTechnical Note 3585A.

    Note: when reprogramming is complete, note down

    the codecal.

    Carry out a basic road test in order to reinitialise

    engine programming.

    CLAIM COMPLETION AND CODING

    When to take action

    Upon receipt of a customer complaint.

    Tooling required

    CLIP installed with the latest update: tool CD

    version no. 48 or more recent.

    1 reprogramming CDversion no. 29 or more recent

    Part No.: 77 11 298 859 or access to the NRE

    application (New Electronic Programming on the

    Renault Net).

    Note: the latest version of the reprogramming CD

    contains all of the information from previous CDs.

    Time required

    Codification items

    With PGCS

    Catalogue function:

    Opecode cause: 0412

    Without PGCS

    NITG code: M4BR

    With or without PGCS

    Supplier code: 050

    Customer complaint code: 1C, 1D, 7N

    VehiclePart number before

    reprogramming

    CLIO 2 V6

    phase 2

    82 00 204 721

    82 00 265 736

    82 00 311 766

    AVANTIME

    Manual gearbox

    82 00 053 932

    82 00 119 366

    82 00 155 990

    82 00 172 323

    82 00 181 472

    82 00 204 722

    AVANTIME

    Automatic

    gearbox

    82 00 219 588

    82 00 295 631

    LAGUNA II 82 00 053 944

    82 00 062 152

    82 00 062 362

    82 00 105 848

    82 00 118 494

    82 00 119 368

    82 00 135 967

    82 00 140 49282 00 162 233

    82 00 164 23482 00 201 757

    82 00 201 75982 00 219 586

    82 00 265 717

    82 00 295 429

    82 00 331 367

    Code Description Time

    0412 Reprogramming petrol

    injection type 5

    0.7

    0129 Basic road test 0.5

    TOTAL 1.2

    Description Code

    Injection computer reprogramming 820