The software reinstallation / upgrade procedure for the Vonino Primus 94HD

Precautions which you have to take before the software reinstallation / upgrade

Make sure the battery is completely charged.

Make sure you have installed the drivers for your tablet.

Make sure you have the writing software and the operating system image

of the tablet on the local hard drive of your PC.

Steps to take for this procedure:

1. Turn off your tablet.

2. Start the program “RKBatchTool”

3. Load the firmware / image to you tablet – press the “FW Path” button.

Choose the latest image version of the software which is available on the website

www.vonino.ro. Assure yourself that the image you use is saved on your local hard drive on

your PC. Depending on you software configuration of your PC your image should be seen as

as “.img” or a “.zip”.

B.

C.

4. Connecting the tablet

A. The tablet has to be turned off.

B. Connect the USB cable from the package to the PC

C. Pressing the button “Volume +” connect the tablet to the USB cable.

In the PC window the “Connect Device” green box will activate.

D. Choose the “Upgrade” option for the beginning of the software reinstallation.

After the procedure ends, the tablet will start by itself.

CONGRATULATIONS!

THE INSTALLATION WAS SUCCESFUL!

WE WISH YOU A PLEASANT DAY!

FOR ANY PROBLEMS THAT APPEARED DURING THIS PROCESS PLEASE

CONTACT US AT TEL. 0215698533

Email service@vonino.ro