Twelve Port Multi-Band Antenna TPA-65R-LCUUUU-H6 DATA … · Twelve Port Multi-Band Antenna TPA-65R-LCUUUU-H6 ... MBK-01 mounting bracket MBK-01 Mounting bracket kit€(top and bottom)

06/13/2016

© 2020 CCI All rights reserved. Specifications are subject to change.

Revision 1.2 1

DS-TPA65RLCUUUUH6-V1.2-160613

Twelve Port Multi-Band Antenna

TPA-65R-LCUUUU-H6

DATA SHEET

Eight High Broadband ports covering PCS, AWS / AWS-3 and WCS bands

(698-798 MHz, 824-896 MHz. & 1695-2360 MHz.)

Four Low Band ports covering 700 MHz and 850 MHz bands

Supports 8x8 MIMO in high band

Excellent PIM Performance

A multi-network solution in one radome

Field replaceable, integrated AISG 2.0 compliant Remote Electrical Tilt (RET)

system with independent tilt control of each freq band set

Reduces tower loading

Frees up space for tower mounted Remote Radio Heads

All Band design simplifies radio assignments

Single radome with twelve ports

Sharp elevation beam eases network planning

Overview

The CCI 12-port Multi-Band Antenna Array is a 12-port antenna with eight

high band ports that cover the full PCS, AWS / AWS-3 and WCS bands. In

addition to the eight high band ports, the antenna includes two 700 MHz

ports and two 850 MHz ports. The 12-port antenna is ready for 8x8 MIMO or

dual 4x4 MIMO in high bands.

Modern networks demand high performance, consequently CCI has

incorporated several new and innovative design techniques to provide an

antenna with excellent side-lobe performance, sharp elevation beams, and

high front to back ratio.

Multiple networks can now be connected to a single antenna, reducing

tower loading and leasing expense, while decreasing deployment time and

installation cost.

Full band capability for 700 MHz , Cellular 850 MHz, PCS 1900 MHz, AWS

1695/2180 MHz and WCS 2300 MHz coverage in a single enclosure.

CCI antennas are designed and produced to ISO 9001 certification standards

for reliability and quality in our state-of-the-art manufacturing facilities.

Applications

8x8 MIMO and 4x4 MIMO on High bands

2x2 MIMO on 700 & 850 bands

Adding additional capacity without adding additional antennas

06/13/2016


Revision 1.2 2



TPA-65R-LCUUUU-H6

SPECIFICATIONS

Electrical

Ports 2 Low Band Ports for 698-798 MHz 2 Low Band Ports for 824-896 MHz

Frequency Range 698-787 MHz 787-798 MHz 824-896 MHz

Gain Peak 14.3 dBi 13.9 dBi 14.6 dBi

Gain Average* 13.9 dBi 13.6 dBi 14.3 dBi

Azimuth Beamwidth (-3dB) 63° 67° 64°

Elevation Beamwidth (-3dB) 13.0° 12.1° 11.0°

Electrical Downtilt 0° to 10° 0° to 10° 0° to 10°

Elevation Sidelobes (1st Upper) < -18 dB < -19 dB < -19 dB

Front-to-Back Ratio @180° > 30 dB > 32 dB > 35 dB

Front-to-Back Ratio over ± 20° > 30 dB > 32 dB > 33 dB

Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 25 dB

Cross-Polar Discrimination (at ± 60°) > 20 dB > 20 dB > 20 dB

Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB

Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1

Passive Intermodulation (2×20W)

≤

-150 dBc

≤

-150 dBc

≤

-150 dBc

Input Power Continuous Wave (CW) 500 watts 500 watts 500 watts

Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45°

Input Impedance 50 ohms 50 ohms 50 ohms

Lightning Protection DC Ground DC Ground DC Ground

*Per BASTA specification of Gain over all Tilts

All specifications are subject to change without notice.

Ports 8 High Band Ports for 1695-2360 MHz

Frequency Range

1850-1990 MHz

1695-1780/2110-2180 MHz

2305-2360 MHz

Gain Peak 15.9 dBi 15.2 dBi 16.4dBi 16.2 dBi

Gain Average* 15.3 dBi 14.5 dBi 15.8 dBi 15.5 dBi

Azimuth Beamwidth (-3dB) 61° 62° 61° 63°

Elevation Beamwidth (-3dB) 10.5° 11.8° 9.1° 8.3°

Electrical Downtilt 2° to 12° 2° to 12° 2° to 12° 2° to 12°

Elevation Sidelobes (1st Upper) < -17 dB < -15 dB < -17 dB < -15 dB

Front-to-Back Ratio @180° > 35 dB > 35 dB > 35 dB > 35 dB

Front-to-Back Ratio over ± 20° > 32 dB > 33 dB > 34 dB > 33 dB

Cross-Polar Discrimination (at Peak) > 17 dB > 20 dB > 20 dB > 25 dB

Cross-Polar Discrimination (at ± 60°) > 17 dB > 16 dB > 17 dB > 17 dB

Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB

Voltage Standing Wave Ratio(VSWR) < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1

Passive Intermodulation (2×20W)

≤

-150 dBc

≤

-150 dBc

≤

-150 dBc

≤

-150 dBc

Input Power Continuous Wave (CW) 300 watts 300 watts 300 watts 300 watts

Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°

Input Impedance 50 ohms 50 ohms 50 ohms 50 ohms

Lightning Protection DC Ground DC Ground DC Ground DC Ground

*Per BASTA specification of Gain over all Tilts

All specifications are subject to change without notice.

06/13/2016


Revision 1.2 3



TPA-65R-LCUUUU-H6

SPECIFICATIONS

Mechanical

Dimensions (L×W×D) 71.2×11.8×11.6 in (1808×300×294 mm)

Survival Wind Speed > 150 mph (> 241 kph)

Front Wind Load 203 lbs (901 N) @ 100 mph (161 kph)

Side Wind Load 199 lbs (887 N) @ 100 mph (161 kph)

Equivalent Flat Plate Area 7.9 ft

2

(0.7 m

2

)

Weight 64.6 lbs (29.3 kg)

Connector 12 × 4.3-10 Female

Mounting Pole 2 to 5 in (5 to 12 cm)

* Weight excludes mounting and RET

06/13/2016


Revision 1.2 4



TPA-65R-LCUUUU-H6

SPECIFICATIONS

Bottom View RET Connection Diagram

Connector Spacing

06/13/2016


Revision 1.2 5



TPA-65R-LCUUUU-H6

SPECIFICATIONS

Mechanical

Element and RET configuration

06/13/2016


Revision 1.2 6



TPA-65R-LCUUUU-H6

SPECIFICATIONS

Typical Antenna Patterns

713 MHz Azimuth with Elevation 5° 862 MHz Azimuth with Elevation 5°

1920 MHz Azimuth 1920 MHz Elevation 6°

06/13/2016


Revision 1.2 7



TPA-65R-LCUUUU-H6

SPECIFICATIONS

2133 MHz Azimuth 2133 MHz Elevation 6°

06/13/2016


Revision 1.2 8



TPA-65R-LCUUUU-H6

ORDERING

Parts & Accessories

TPA-65R-LCUUUU-H6 6 foot (1.8 m) Twelve Port antenna with 65° azimuth

beamwidth and 4 factory installed BSA-RET200 RET

actuators

TPA-65R-LCUUUU-H6-K Antenna kit with 4 factory installed RET actuators and

MBK-01 mounting bracket

MBK-01 Mounting bracket kit (top and bottom) with 0° to 10°

mechanical tilt adjustment

BSA-RET200 Remote electrical tilt actuator

OPA-CBK-AG-RRU OctoPort antenna to RRU AISG cable kit

OPA-CBK-RA-AG-RRU OctoPort antenna to RRU AISG right angle cable kit

06/13/2016


Revision 1.2 9


Mounting Bracket Kit

MBK-01

ACCESSORIES

Mechanical


Hinge Pitch 47.25 in (1200 mm)

Mounting Pole Dimension 2 to 5 in (5 to 12 cm)

Fastener Size M12

Installation Torque 40 ft·lb (54 Nm)

Mechanical Tilt Adjustment 0° - 10°

MBK-01 Top Adjustable Bracket MBK-01 Top Adjustable Bracket Side View

MBK-01 Bottom Fixed Bracket

06/13/2016


Revision 1.2 10


Remote Electrical Tilt Actuator (RET)

BSA-RET200

ACCESSORIES

General Specifications

Part Number BSA-RET200

Protocols AISG 2.0

RET Type Type 1

Adjustment Cycles >10,000 cycles

Tilt Accuracy ±0.1°

Temperature Range -40° C to 70° C

Electrical

Data Interface Signal DC

Input Voltage 10-30 Vdc

Current Consumption Tilt 120 mA at V

in

=24

Current Consumption Idle 55 mA at V

in

=24

Hardware Interface AISG-RS 485 A/B

Input Connector Male 1 × 8 pin Daisy Chain

Output Connector Female 1 × 8 pin Daisy Chain

Mechanical

Dimensions (L×W×D) 8.0×5.0×2.0 in. (213×135×51 mm)

Housing ASA/ABS/Aluminum


ASA= Acrylic Styrene Acrylonitrile

ABS=Acrylanitrile Butadiene Styrene

06/13/2016


Revision 1.2 11


AISG Cable Kit

OPA-CBK-AG-RRU

ACCESSORIES

Electrical Specifications

Individual Cable Part Number AISGC-M-F-18 AISGC-M-F-10FT

Cable style UL2464 UL2464

Protocol AISG 1.1 and AISG 2.0 AISG 1.1 and AISG 2.0

Maximum voltage 300 V 300 V

Rated current 5 A at 104° F (40° C) 5 A at 104° F (40° C)

Mechanical Specifications


Cables per kit 3 2

Connectors 2 x 8 pin IEC 60130-9

Straight male/straight female

2 x 8 pin IEC 60130-9

Straight male/straight female

Tightening torque Hand tighten only

≈

1.84 ft-lbs (2.5 Nm) Hand tighten only

≈

1.84 ft-lbs (2.5 Nm)

Construction Shielded (Tinned Copper Braid) Shielded (Tinned Copper Braid)

Braid coverage 85% 85%

Jacket Material Matte Polyurethane (Black) Matte Polyurethane (Black)

Conductors 1 twisted pair - 24 AWG

3 conductors - 19 AWG

AWM style 2464

1 twisted pair - 24 AWG


AWM style 2464

Cable Diameter 0.307 in (7.8 mm) 0.307 in (7.8 mm)

Length 18 - 20 in (457 - 508 mm) 120 in (3048 mm)

Weight 0.27 lbs (0.12 kg) 0.69 lbs (.31 kg)

Minimum bend radius 3.9 in (100 mm) 3.9 in (100 mm)

AISG-Male to AISG-Female Jumper Cable

Environmental Specifications


Temperature Range -40° to 80° C -40° to 80° C

Flammability UL 1581 VW-1 UL 1581 VW-1

Ingress Protection IEC 60529:2001, IP67 IEC 60529:2001, IP67

06/13/2016


Revision 1.2 12


AISG Cable Kit

OPA-CBK-RA-AG-RRU

ACCESSORIES

Electrical Specifications

Individual Cable Part Number AISGC-MRA-FRA-20 AISGC-M-FRA-10FT

Cable style UL2464 UL2464

Protocol AISG 1.1 and AISG 2.0 AISG 1.1 and AISG 2.0

Maximum voltage 300 V 300 V

Rated current 5 A at 104° F (40° C) 5 A at 104° F (40° C)

Mechanical Specifications


Cables per kit 3 2

Connectors 2 x 8 pin IEC 60130-9

Right angle male/right angle female

2 x 8 pin IEC 60130-9

Straight male/right angle female

Tightening torque Hand tighten only

≈

1.84 ft-lbs (2.5 Nm) Hand tighten only

≈

1.84 ft-lbs (2.5 Nm)

Construction Shielded (Tinned Copper Braid) Shielded (Tinned Copper Braid)

Braid coverage 85% 85%

Jacket Material Matte Polyurethane (Black) Matte Polyurethane (Black)

Conductors 1 twisted pair - 24 AWG


AWM style 2464

1 twisted pair - 24 AWG


AWM style 2464

Cable Diameter 0.307 in (7.8 mm) 0.307 in (7.8 mm)

Length 20 in (508 mm) 120 in (3048 mm)

Weight 0.23 lbs (0.10 kg) 0.77 lbs (0.35 kg)

Minimum bend radius 3.9 in (100 mm) 3.9 in (100 mm)

Right Angle to Right Angle and Right Angle to Straight Jumper Cable

06/13/2016


Revision 1.2 13


AISG Cable Kit

OPA-CBK-RA-AG-RRU

ACCESSORIES

Environmental Specifications


Temperature Range -40° to 80° C -40° to 80° C

Flammability UL 1581 VW-1 UL 1581 VW-1

Ingress Protection IEC 60529:2001, IP67 IEC 60529:2001, IP67

06/13/2016


Revision 1.2 14



TPA-65R-LCUUUU-H6

STANDARDS &

CERTIFICATIONS

Standards & Compliance

Safety EN 60950-1, UL 60950-1

Emission EN 55022

Immunity EN 55024

Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5,

IEC 60068-2-6, IEC-60068-2-11, IEC 60068-2-14,

IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29,

IEC 60068-02-30, IEC 60068-2-52, IEC 60068-2-64,

GR-63-CORE 4.3.1, EN 60529, IP 24

Certifications

Antenna Interface Standards Group (AISG), Federal Communication

Commission (FCC) Part 15 Class B, CE, CSA US, ISO 9001

Documents

Twelve Port Multi-Band Antenna TPA-65R-LCUUUU-H6 DATA … · Twelve Port Multi-Band Antenna TPA-65R-LCUUUU-H6 ... MBK-01 mounting bracket MBK-01 Mounting bracket kit€(top and bottom)