Tutorial for Purchasing NERS Software

This NERS software supports reprogrammable Engine and Transmission control units from 1999 to 2019 model year vehicles,

and 2005 MY and later VIN writing into ECUs, when using a Nissan validated pass-through device. It does not provide

diagnostic or key programming capability. For Engine and Transmission control unit reprogramming and VIN writing

capability on 2020 MY & newer, please use CONSULT-III plus or CONSULT-III plus R2R software.

Purchasing NERS Software

Purchase NERS by first clicking on the “NERS J2534 ECU ‘Blank’

Programming, ECU Reprogramming, VIN writing and Device Maker Self

Validation Program” tab shown below:

Click the link “Purchase” link:

Click the link “Purchase NERS Software (version 04.03.00) - $ 350”

as shown below. Confirm your purchase by clicking “Check Out”:

STEP 1

Tutorial for Purchasing NERS Software

Purchasing NERS Software

Enter your Address and click “Total”: Enter your billing address, and click “Confirm Order”:

Choose your billing method:

STEP 1 continued

Tutorial for Purchasing NERS Software

Choose your billing method:

Download NERS by going to your first clicking on “My Available

Downloads” page that can be found on the home page of the

site:

Click on the “NERS Software (version 04.03.00)” link below

to begin the download.

Purchasing ECU Data Files

Purchase ECU data files by first clicking on the “NERS J2534 ECU

‘Blank’ Programming, ECU Reprogramming, VIN writing and

Device Maker Self Validation Program” tab shown below:

Click the appropriate tab for your repair:

STEP 2 STEP 3

STEP 1

Tutorial for Purchasing NERS Software

Purchasing ECU Data Files

Enter the first 5 digits of your ECU part number in the box: Click on one of the options from the drop down list:

The part numbers available that match your entry will begin to appear, as

shown below:

A second box will appear. Enter the last 5 digits of your ECU part number:

STEP 1 continued

Tutorial for Purchasing NERS Software

Purchasing ECU Data Files

The part numbers available that match your entry will begin to appear, as

shown below:

Click on one of the options from the drop down list:

The configuration(s) that matches the part number entered will appear.

Click the desired configuration to purchase:

Confirm that the configuration is correct, and click “Submit”:

STEP 1 continued

Tutorial for Purchasing NERS Software

Purchasing ECU Data Files

Click “Purchase” on the following screen: Enter your Address and click “Total”:

Click “Check Out”: Choose your billing method:

STEP 1 continued

Tutorial for Purchasing NERS Software

Purchasing ECU Data Files

Enter your billing address, and click “Confirm Order”:

You will then see the below screen as confirmation of your purchase:

STEP 1 continued

Tutorial for Purchasing NERS Software

Purchasing ECU Data Files

Download the ECU data file. You can access the ECU Download page on

your confirmation page: The ECU data file will be located in the “ECU Downloads” box:

OR you can access it by going to your “My Available Downloads” page

that can be found on the home page of the site: The download will pop-up at the bottom of the screen for your access:

STEP 2

Tutorial for Purchasing NERS Software

Purchasing ECU Data Files

Once the file is unzipped, you will be presented with 4 files. Double click

the “unpack” file. A confirmation will appear that states that your files have

been moved to a specified location. If the “unpack” file does not move your

files to the proper location, you can copy and paste the .dat, .csv (excel file),

and the “readme” file to the appropriate location, listed below

Files will be moved to-

WIN7 or WIN10 - C:\Program Files (x86)\Nissan J2534 ECU

reprogramming soft- ware\Application data\Reprogramming

OR

XP - C:\Program Files\Nissan J2534 ECU reprogramming software\Appli-

cation data\Reprogramming Data folder

STEP 2 continued