74
DVD-P Samsung 300mm TRAINING MANUAL DVD-E360K

Training Manual DVD-E360.En

  • Upload
    jbetovi

  • View
    153

  • Download
    11

Embed Size (px)

Citation preview

Page 1: Training Manual DVD-E360.En

DVD-P Samsung 300mmTRAINING MANUAL

DVD-E360K DVD-E360K

Page 2: Training Manual DVD-E360.En

AgendaAgenda

I. Understanding of DVD Player

II. Inside of DVD-E360K 300mm

Model

III. Disassembly & Reassembly

IV. Trouble Shooting

V. Attachment

Page 3: Training Manual DVD-E360.En

UNDERSTANDING

OF DVD-PLAYER

Ⅰ. Understanding of DVD-PLAYER

Page 4: Training Manual DVD-E360.En

CONTENTSCONTENTS

I. Basic Block DVD-Player

II. Product Specification

III. Signal Connection Types

IV. General Features

Ⅰ. Understanding of DVD-PLAYER

Page 5: Training Manual DVD-E360.En

Basic Block DVD-Player

Ⅰ. Understanding of DVD-PLAYER

Page 6: Training Manual DVD-E360.En

Ⅰ. Understanding of DVD-PLAYER

General

Power Requirements AC120V~60Hz

Power Consumption 6W (On condition), 1W (Off condition)

Weight 2.4 lbs

Dimensions 300 mm (W)X 208 mm (D)X 37 mm (H)

Operating Temperature Range +5°C to + 35°C

Operating Humidity Range 10% to 75%

Video Output

Composite Video 1 Channel : 1.0 Vp-p (75ΩLoad)

60 Hz

Component Video

Y : 1.0 Vp-p (75ΩLoad)

Pb : 0.7 Vp-p (75ΩLoad)

Pr : 0.7 Vp-p (75ΩLoad)

Audio Output

Output Terminal 2 CH

Maximum Output level 2Vrms

Frequency Responece 20Hz~20kHz

Digital audio Output Coaxial terminal (S/PDIF)

Product Specification

Page 7: Training Manual DVD-E360.En

Signal Connection Types

Ⅰ. Understanding of DVD-PLAYER

Composite

Audio

SchartCoaxial

Page 8: Training Manual DVD-E360.En

General Features

Digital Photo Viewer (JPEG).

MP3/ WMA playback.

MPEG4 (.avi) playback.

Parental Control (DVD) The parental control allows users to set the level necessary to prohibit children from

viewing harmful movies such as those with violence, adult subject matter, etc)

Various On-screen Menu Function.

EZ View (DVD) enables picture adjustment to match your TV ユ s screen size (16:9 or 4:3)

Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound

reproduction.

CD Ripping feature lets you to copy audio from disc to USB device into MP3 format

Progressive Scan creates an improved picture with double the scan lines of conventional interlaced picture.

Screen

Slow Motion

Repeat

Ⅰ. Understanding of DVD-PLAYER

Page 9: Training Manual DVD-E360.En

Inside of DVD-E360K 300mm Model

Ⅱ. Inside of DVD-E360K 300mm Model

Page 10: Training Manual DVD-E360.En

CONTENTSCONTENTS

I.I. IntroductionIntroduction

II.II. Some Functions of DVD-E360KSome Functions of DVD-E360K

III.III. Product Feature SpecificationProduct Feature Specification

IV.IV. Supplied AccessorySupplied Accessory

V.V. Control & Connection PanelControl & Connection Panel

VI.VI. Block DiagramBlock Diagram

VII.VII. Inside Look DVD-E360KInside Look DVD-E360K

VIII.VIII. Wiring DiagramWiring Diagram

IX.IX. Circuit Operating DescriptionsCircuit Operating Descriptions

X.X. Board DescriptionBoard Description

Ⅱ. Inside of DVD-E360K 300mm Model

Page 11: Training Manual DVD-E360.En

IntroductionIntroduction

Tool: Basic Model E360K (300mm)

Black Glossy

USB

Display : LED

Press Button

What is SEC’S Poussin ?What is SEC’S Poussin ?=Basic 300 mm Slim & Compact Basic 300 mm Slim & Compact DesignDesign

=TOC (Touch of color)TOC (Touch of color)

Ⅱ. Inside of DVD-E360K 300mm Model

Page 12: Training Manual DVD-E360.En

2012

Some Functions of DVD-E360KSome Functions of DVD-E360K

Ⅱ. Inside of DVD-E360K 300mm Model

Slim & Compact Design reduce 60mm

12bit Video Digital Analog Converter

Media bright UI will allow user to choose from various option provided in the background screen that uses 196~256 color for more advanced image.

360mm

2011

Page 13: Training Manual DVD-E360.En

Some Functions of DVD-E360KSome Functions of DVD-E360K

Ⅱ. Inside of DVD-E60K Poussins Model

Key Sales Point

Divx Playback DivX

Downloading

Page 14: Training Manual DVD-E360.En

Some Functions of DVD-E360KSome Functions of DVD-E360K

Ⅱ. Inside of DVD-E360K 300mm Model

MP3, WMA, JPEG

Downloading

Page 15: Training Manual DVD-E360.En

Some Functions of DVD-E360KSome Functions of DVD-E360K

Ⅱ. Inside of DVD-E360K 300mm Model

CD Ripping :

Audio CD Playback.

Ripping into MP3 format.

Copy to MP3 Player

Enjoy your favorite song with MP3 Player.

1

CD Ripping

Page 16: Training Manual DVD-E360.En

Ⅱ. Inside of DVD-E360K 300mm Model

Description fig Description Part no

Remote Control (AK59-00117A)

Owners Instructions (AK68-02204A)

Video/audio Cable (AC39-42001U &

AC39-22017Z)

Supplied AccessorySupplied Accessory

Page 17: Training Manual DVD-E360.En

5. STANDBY/ON

Turn On/Off the DVD Player.

6. USB HOST Connect digital still camera, MP3 player, memory stick, card reader, or other removable storage devices.

7. MIC

Connect microphone

Control & Connection Control & Connection PanelPanel

Ⅱ. Inside of DVD-E360K 300mm Model

Description

Front panel Control

1. DISC TRAY

Place the disc here.

2. DISPLAY

Operation indicators are display here.

3. OPEN/CLOSE Press to open and close the disc tray.

4. PLAY/PAUSE

Play or pause the disc/Stops Disc Play

Page 18: Training Manual DVD-E360.En

Control & Connection Control & Connection PanelPanel

Ⅱ. Inside of DVD-E360K 300mm Model

Page 19: Training Manual DVD-E360.En

Ⅱ. Inside of DVD-E360K 300mm Model

Control & Connection Control & Connection PanelPanel

A. Connecting to a TV(VIDEO)- Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.- Turn on the DVD player and TV.- Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

B. Connection to a TV Using the component Jacks (Progresive/Interlance)- Connecting through the Component jacks lets you view video at the 480p (Progresive Scan) resolution.- What is “Progresive Scan”? Progresive scan has twice as many scanning lines per frame as interlaced (480i) output and provides better and clearer picture quality.

1. Using Component video cables (not included), connect the COMPONENT VIDEO OUT (PR, PB, and Y) jacks on the rear of the DVD player to the COMPONENT IN (PR, PB, and Y) jacks on your TV.

2. Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV. Turn on the DVD player and TV.

3. Set the video output to P-SCAN/I-SCAN in the display Set Up menu. You can also use the VIDEO SEL. Button to change the Video Output mode.

4. Press the input selector button on your TV remote control until the Component signal from the DVD player appears on the TV.

Page 20: Training Manual DVD-E360.En

Ⅱ. Inside of DVD-E360K 300mm Model

Control & Connection Control & Connection PanelPanel

C. Connection to an Audio System (2 Channel, Dolby Digital, or MPEG2)

• Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier. If using a Coaxial cable, connect the DIGITAL AUDIO (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.

• Using the video signal cable (s), connect the COMPONENT or VIDEO OUT jacks on the rear of the DVD player to the COMPONENT or VIDEO jacks of your TV.

• Turn on your DVD player, TV, and Amplifier.• Press the input select button of the Amplifier to select the audio input your DVD player is connected to in

order to hear sound. Refer to your Amplifier's user manual to set the Amplifier's audio input.

Page 21: Training Manual DVD-E360.En

11. TOOLS Button Displays the current disc mode. It also lets you acces the Display function.12. OPEN/CLOSE Button To open and close the disc tray.13. MARKER Quickly find bookmark sections of a DVD.14. USB Button To change device which acces to USB device. 15. VIDEO SEL. Button Changes video output mode.16. PLAY/PAUSE Button Begins disc play.17. SUBTITLE Button ()18. RETURN Button Returns to a previous menu.19. TITLE MENU Button () Brings up the Title menu.20. INFO Button Used to display playback info banner.

Control & Connection Control & Connection PanelPanel

Ⅱ. Inside of DVD-E360K 300mm Model

1. DVD POWER Button Turns the power on or off.2. REPEAT Button Allows you to repeat play a title,chapter, track, or disc.3. DISC MENU Button Brings up the Disc menu.4. RECORD5. SEARCH Buttons ( /) Allows you to search forward/back ward through a disc.6. STOP Button () To stop the disc.7. SKIP Buttons ( / ) Use to skip the title, chapter or track8. MENU Button Brings up the DVD player’s menu.9. ENTER / / , / Buttons This button functions as a toggle switch.10. AUDIO Button Use this button to access various audio functions on a disc. Use this button to select an available TV source (mode TV)

DVD-E360K

Page 22: Training Manual DVD-E360.En

Wiring DiagramWiring Diagram

Ⅱ. Inside of DVD-E360K 300mm Model

Page 23: Training Manual DVD-E360.En

Location of Test Point

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

Page 24: Training Manual DVD-E360.En

Power(SMPS)

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

1-1-1 Comparison between Linear Power Supply and S.M.P.S.1-1-1 (a) Linear

The output Vs of transformer is determined by the ratio of 1st Np and 2nd Ns.Vs = (Ns/Np) x Vp

Vout is output (DC) by diode and condensor.

Input : Common power to transformer (Vp).

Fig. 1-4

• Waveform/Description

Page 25: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

• Advantages and disadvantages of linear power supply

1). Advantages : Little noise because the output waveform of transformer is sine wave.

2) Disadvantages : Additional margin is required because Vs is changed (depending on power source. (The regulator loss is caused by margin design). Greater core size and condenser capacity are needed, because the transformer work son a single power frequency.

1-1-1 (b) S.M.P.S (Pulse Width Modulation)

Fig.1-6

Fig.1-5

Charge by common power

Regulator loss

Page 26: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

FLY- Back PWM (Pulse With Modulation) Control

Ⅱ. Inside of DVD-E360K 300mm Model

1-1-2 (a) AC Power Rectification/Smoothing Terminal

1) PDS01, PDS02, PDS03, PDS04 : Convert AC power to DC(Full wave rectification). 2) PER10, PER10A : Smooth the voltage converted to DC. 3) PCD01 : Noise removal at power input/output. 4) VX80JS : SMPS protection at power surge input.

1) Prevent residual high voltage at the terminals of switch during switch off/Suppress noise. High inverted power occurs at switch (PIC1) off, because of the 1st winding of transformer :(V=-L1 xdi/dt. L1 : Leakage Induction) A very high residual voltage exist on both terminals of PIC1 4, 5~8 pin because dt is a very short.2) SNUBBER circuit protects PIC1 from damage through leakage voltage suppression by RC.

1-1-2 (c) Driving circuitWhen Vin supplied, driving current Ig occurs through the PIC1. By this I1 (=Hfe x Ig) occurs through the PIC1 and the Vb is inducted to base winding coil NB. By inducted Vb, Ib start flow and the VCC voltage of PIC1 is sustained stable. Ib is constant and I1 increases in Proportion to time. After constant time passed Ib become to shortage and PIC1 is cut OFF (S/W OFF).

Page 27: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

Fig.1-8 Driving Circuit

Page 28: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

• Operation descriptions 1.Internal OP-Amp ‘+’ base potential of ICM803 is 2.5V and external “-” input potential is connected with PRS34and PRS35 to maintain Vout of 4.4V. 2.If load of 4.4V terminal increase (or AC input voltage decrease) and Vout decrease over 4.4V, Then : ICM803 “R” potential decrease over 2.5V -->ICM803 A-K BASE Current decrease --> ICM803 A-K Current decrease --> PICS1 DIODE Current decrease --> PICS1 C-E Current decrease --> PICS1 C-E Voltage increase --> PICS1 F-B Voltage increase --> OUT DUTY increase TRANS Primary Cuttent Increase --> TRANS Primary Power increase --> Vout increase --> Vout maintain 4.4V - PRD31, PRD32 : Reduce 4.4V overshoot. - PRS32, PCS32 : Prevent ICM803 oscillation (for phase correction).

1-1-2 (d) Feedback Control Circuit

Fig. 1-9

Page 29: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

1-1-3 Iternal Block Diagram

• Internal Block Diagaram

Page 30: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

RF

Ⅱ. Inside of DVD-E360K 300mm Model

1-2-1 RF Signal

RF block is integrated in the MT 1389

Fig. 1-11 Show the flow of signal generated by the pick-up.

RF signal detected from pick-up is converted in to RF signal via RF block in MT 1389

A,B,C,D signals detected from pick-up are converted in to FE,TE,PI,DEFECT signals internally.

1-2-1 Block Diagram

Fig. 1-11

120

127

128

1

2

4

3

V1P4 (11)

Page 31: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

System Control

Ⅱ. Inside of DVD-E360K 300mm Model

1-3-1 OutlineMedia Tek MT1389J is a cost-effective DVD system on chip (SOC) which incorporates advanced features likeMPEG-4 video recorder, high quality TV encoder and state of art deinterlace processing. The Media tek MT1389JEnables consumer electronics manufactures to build high quality , USB2.0,MS/SD/MMC reader, feature rich DVD Player, portable DVD players or any other home entertainment audio/video/devices.Based on media Tek’s world leading DVD player SOC architecture, the MT1389J is the new generation of theDVD player SOC. It integrates the media tek 3rd generation front en digital RF amplifier and the servo/MPEG AV decoder. To enrich the feature of DVD PLAYER, the MT1389J equips a simplified MPEG-4 advanced simple profile (ASP) video recorder to fully support the DivX1 Home Theater profile. The Progressive scan of the MT1389J utilized advanced motion adaptive de interlace algorithm to achieve the best movie/video playback. It also support a 3:2 pull down algorithm to give the best film effect. The 108MHz/12-bit video DAC provides users a whole new viewing experience.

Page 32: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Servo

Ⅱ. Inside of DVD-E360K 300mm Model

1-4-1 OutlineSERVO system of DVD is composed of focusing SERVO, Tracking SERVO,SLED Linked SERVO and CLV SERVO (DISC Motor Control SERVO).1) Focusing SERVO : Focuses the optical spot output from object lens onto the surface. Maintains a uniform distance between object lens of Pick-up and disc (for surface vibration of disc). 2) Tracking SERVO: Make the Object lens follow the disc track in use of tacking error signal (created from pick-up).3) SLED Linked SERVO : When the tracking actuator inclines outwardly as the object lens

follows the track during play, the SLED motor moves slightly ( and counteracts the incline).4) CLV SERVO(DISC Motor Control SERVO) : Controls the disc motor to maintain a constant linear velocity ( necessary for RF signal).

Page 33: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

1-4-2 Block Diagram

DECK

Page 34: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

1-4-3 Operation1) Focusing SERVO

2) Focusing SERVO The focus loop is changed from open loop to closed loop, and the triangular waveform moves the object lens up and down (at pin 17 of MIC1 during Focus SERVO ON.) at that time, S curve is generated in MIC1. Summing signal of PD A,B,C,D, is generated, and zero cross (1.65V) point occurs when S curve is focused and ABCD signal exceeds a preset, constant value. The focus loop is changed to closed loop, and the object lens follows

the disc movement, maintaining a constant distance from the disc. (these operations are same in CD and DVD).

FOD

Internal (FE)

Summing signal of PD

A,B,C,D

(internal)

Vref

Vref

Vref

(2) PLAY

When focus loop closes the loop during focus servo on, both pin 13 and 14 of IC3 are controlled by MIC1

Page 35: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

2) TRACKING SERVO (1) NORMAL PLAY MODE For DVD Composite : The signal output from PD A,B,C,D of Pick-up, the tracking error Phase difference of A+C and B+D in RIC1, and inputs to MIC1. Then, it is output to MIC1 via digital equalizer, and applied to the tracking actuator through FIC3. Pin 15 of MIC1 is controlled by VREF(approx.1.65V)during normal play. Meanwhile, DVD repeats the track jump from 1 to 4 in inner direction at normal play (because data-read speed from disc is faster than data output speed on screen). For CD,VCD Receive the signal output trough E,F of pick-up. The tracking error signal is similar to DVD.

2) SEARCH Mode: Search mode : Fine seek, (Moving the tracking actuator slightly little bellow 255 track) and coarse search, moving much in use of sled motor. The coarse search will be described in sled linked servo an now, the fine is explained shortly. If the object lens is located near target, cut off the tracking loop and give the control signal as many as desired count to move the tracking actor via MIC1 pin 26 terminal (TRACK_PWM).

3) SLED LINKED SERVO• Normal Play mode Move SLED motor slightly by means of PWM signal in MIC1 pin 23, as tracking actuator moves along with track during play. Control to

move the entire Pick-up as the tracking actuator moves.• Coarse search mode in case of long-distance search (such as chapter search ), MIC1 uses open-loop jump method. Then, read ID an compute the existing track count after input of next track. If the existing track count is within fine seek range, tracking begins using fine seek.

4) CLV SERVO(DISC MOTOR CONTROL SERVO) Detect SYNC signals from R/U in MIC1, and out put PWM signal to MIC1 for constant linear velocity.

Page 36: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

DVD Data Processor

Ⅱ. Inside of DVD-E360K 300mm Model

1-5-1 Outline

The MT 1389J (highly-integrated device) includes the full front-end disc controller, back-end decoder Functions As well as the host control CPU.The principal off-chip component include the disc drive with its optical pick up, tray sled and spindle drivers and motors,16Mbits of SDRAM, and the audio Digital-to-Analog converters some applications.

In case of general disc refresh, the memory is almost filled up periodically because write rate memory after disc playback and signal process is faster A/V decoder. When the memory is filled, this status is reported by interrupt to main micom, which controls the servo to kick back the pick-up to the previous track after memorizing the last data read from disc until now. It takes some times to jump to the previous track and return to the original (jump location) again. The memory will have an empty space because A/V decoder reads out data of memory.When the memory has an empty space, where data can be processed and written and the pick-up correctly gets to the original location (before kick back location) again, it reads data again avoids the interrupt of data read previously. The basic operation repeats to perform as described above.

Page 37: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

1-5-2 Block Diagram

Open

Close

MIC2 16M bit

SDRAM

IC4 Flash

Memory 2M bit

MOTORMOTORIC3IC3

MIC1(MT 1389J)

MPEG DECODERDIGITAL SERVO

SDP & CPURF AMP &DPD

Page 38: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Video

Ⅱ. Inside of DVD-E360K 300mm Model

1-6-1 Outline

MIC1 (A/V decoder with video encoder) diverges from the 27MHz crystal, then generates VSYNC an HSYNC.MIC1( A/V decoder with video encoder), copy guard processing an D/A conversion of 8bit video data internally inputted from video decoder block by MIC1.Video signal converted into analog signal is outputted via amplifier of analog part.

1-6-2 NTSC/PAL Digital Encoder (MT 1389J ; Built in video encode)

MIC1 inputted from pin 161 with 27MHz generates HSYNC an VSYNC which are based on video signal.MIC1 is synchronous signal with decoded video signal and control the output timing of 8bit video signal.The separate signal is encoded to NTSC by control of MIC1.The above signals, which are CVBS (Composite Video Burst Synchronize), Y/Pr and Pb, are outputted from MIC1 directly.In Course of encoding, 8bit data can extend to 10bit or more.To convert the extended data to quantization noise as possible,MIC1adopts 10bit D/A converter.MIC1 perform video en-coding as well as copy protection.

Page 39: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Audio

Ⅱ. Inside of DVD-E360K 300mm Model

1-7-1 Outline

A/V decoder (MIC1 ; MT 1389J) is the supply to DATA 0 for 2-channel mixed audio output.The audio data transmitted from A/V decoder (MIC ;MT 1389J) are converted into analog signal via audiD/A converter and outputted with only 2 channels audio data and transmit them to Post Filter.If DVD of multichannel Source disc, if is downmixed and transmit them to Post Filter.

Mixed Audio Output (2-Channel)

MIC1

(MT 1389J)

A/V Decoder

POST FILTER SUM

POST FILTER SUM

Page 40: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

Source Data Types: MPEG-1,2,Dolby

Digital, CD-DA,LPCM,WMAMIC2 (LOCAL DRAM) MIC1 (MT 1389G: A/V DECODER)

AUDIO INPUT

BUFFER

AUDIO INPUT

BUFFER

HOST or DVD/

VCD INTERFACE

AUDIO DECODER

(MPEG,Dolby Digital,

CD DA,LPCM WMA)

IEC 958/1937 OUTPUT PROCESS

IEC 958/1973

INTERFACE

RECEIVER

or DECODER

(IEC 958/1937)

2,4 ot 6

CHANENNEL OUTPUT PROSES

DIGITAL AUDIO

INTERFACE AUDIO DAC

2 Channel LPCM, Decoded Dolby Digital, MPEG,WMA

Compressed Data WMA(MPEG,Dolby Digital), CDDA,LPCM

1-7-2 DVD Audio Output

Uncompressed 16 or 24 bit

LPCM samples at

fs+44.1,48,96KHz

Page 41: Training Manual DVD-E360.En

Circuit Operating Circuit Operating DescriptionsDescriptions

Ⅱ. Inside of DVD-E360K 300mm Model

1) Compressed Data

The audio data inputted to MIC1 ; MT 1389J) A/V decoder is divided into compressed data uncompressed data. It is compressed data that is compressed with-channel audio data such as Dolby digital, MPEG,DTS, WMA, etc. The data compressed data inputted to MIC1; MT 1389J is converted into the uncompressed data of 2, 4, an 6 channels through MIC1 build-in audio decoder an is outputted to data 0 through MIC1 built-in audio decoder and is outputted to data 0 through digital audio interface. Via IEC-985 output process.

2) Uncompressed Data

The uncompressed data is called CD-DA,LPCM data. The 2 channels data is converted through audio decoder 2-channel data an Data 0 and are outputted in digital audio interface. Via IEC-859 Output process, they is transmitted to digital amplifier or AC-3/MPG DTS amplifier built in the external digital input source IEC-985/1937 transmission format .

Page 42: Training Manual DVD-E360.En

DISASSEMBLY&

REASSEMBLY

III. Disassembly & Reassembly

Page 43: Training Manual DVD-E360.En

CONTENTSCONTENTS

I.I. Cabinet & PCBCabinet & PCB

II.II. DeckDeck

III. Disassembly & Reassembly

Page 44: Training Manual DVD-E360.En

Cabinet & PCBCabinet & PCB

III. Disassembly & Reassembly

3-1-1 Top cabinet Removal• Remove 2 Screws the back top Cabinet.• Lift up the Top Cabinet in direction of

arrow.

Page 45: Training Manual DVD-E360.En

Cabinet & PCBCabinet & PCB

III. Disassembly & Reassembly

3-1-2 Ass’y Front-cabinet Removal• Remove 7 Hooks and Ass’y Front Cabinet

Page 46: Training Manual DVD-E360.En

Cabinet & PCBCabinet & PCB

III. Disassembly & Reassembly

3-1-2 Ass’y Loader Removal• Remove Ass’y Loader FPC cable from Ass’y Main

PCB.• Remove 3 Screw from the ass’y Loader and lift up.

Page 47: Training Manual DVD-E360.En

III. Disassembly & Reassembly

Cabinet & PCBCabinet & PCB

3-1-4 Main PCB and SMPS PCB Removal

1) Remove 1 screw the back bottom cabinet.2) Remove 1 screw from the Main PCB.3) Remove 1 screw from the S.M.P.S PCB.4) Remove 2 Screws from the S.M.P.S PCB, and lift up.

Page 48: Training Manual DVD-E360.En

Cabinet & PCBCabinet & PCB

III. Disassembly & Reassembly

3-2-5 PCB Location

Page 49: Training Manual DVD-E360.En

TROUBLESHOOTING

Page 50: Training Manual DVD-E360.En

CONTENTSCONTENTS

1. Disc cannot be played2. Pick up deck can’t move3. Can’t FF/RW4. Pick up can’t find the disc5. Abnormal Disc Rotation6. Deck can’t Open/Close7. No Audio Output8. No Y/Pb/Pr (Component) Output9. No Progressive Output10. No CVBS Output 11. No Power12. No USB Output

IV. Trouble Shooting

Page 51: Training Manual DVD-E360.En

1. Disc can not be played

IV. Trouble Shooting

Page 52: Training Manual DVD-E360.En

IV. Trouble Shooting

1. Disc can not be played

Page 53: Training Manual DVD-E360.En

2. Pick-up deck can’t move

IV. Trouble Shooting

Page 54: Training Manual DVD-E360.En

IV. Trouble Shooting

2. Pick up deck can’t move

Page 55: Training Manual DVD-E360.En

3. Can’t FF/RW

IV. Trouble Shooting

Page 56: Training Manual DVD-E360.En

IV. Trouble Shooting

3. Can’t FF/RW

Page 57: Training Manual DVD-E360.En

4. Pick-up can’t find the disc

IV. Trouble Shooting

Page 58: Training Manual DVD-E360.En

4. Pick-up can’t find the disc

IV. Trouble Shooting

Page 59: Training Manual DVD-E360.En

5. Abnormal Disc Rotation

IV. Trouble Shooting

Page 60: Training Manual DVD-E360.En

IV. Trouble Shooting

5. Abnormal Rotation of Disc Motor

Page 61: Training Manual DVD-E360.En

IV. Trouble Shooting

5. Abnormal Rotation of Disc Motor

Page 62: Training Manual DVD-E360.En

6. Deck can’t Open/Close

IV. Trouble Shooting

Page 63: Training Manual DVD-E360.En

6. Deck can’t open close

IV. Trouble Shooting

Page 64: Training Manual DVD-E360.En

6. Deck can’t open close

IV. Trouble Shooting

Page 65: Training Manual DVD-E360.En

7. No Audio Output

IV. Trouble Shooting

Page 66: Training Manual DVD-E360.En

7. No Audio Output

IV. Trouble Shooting

Page 67: Training Manual DVD-E360.En

8. No Y/Pr/Pb (Component) Output

IV. Trouble Shooting

Page 68: Training Manual DVD-E360.En

9. No Progressive Output

IV. Trouble Shooting

Page 69: Training Manual DVD-E360.En

10. No CVBS Output

IV. Trouble Shooting

Page 70: Training Manual DVD-E360.En

10. No CVBS Output

IV. Trouble Shooting

Page 71: Training Manual DVD-E360.En

11. No Power

IV. Trouble Shooting

Page 72: Training Manual DVD-E360.En

11. No Power

IV. Trouble Shooting

Page 73: Training Manual DVD-E360.En

12. No USB Output

IV. Trouble Shooting

No USB Output

Is the pin VDD 33 USB

(MIC1-26) normal level?

Is USB output from(MIC1-24, 25) OK?

Is the USB signal inmcon1-pin 5,12 n 13 (usb 5v, usb-p, usb-

n) OK?

Check connection MCON1 and USB1

Check power connection betweenMIC1-26,and 3.3V,

Check MIC1 of Main Board

Check connection betweenMIC1-24, 25 and MCON1

Page 74: Training Manual DVD-E360.En

Thank You