TOREX_New Product Catalog 2011

TOREX SEMICONDUCTOR

NEW PRODUCT CATALOG

2011

mik

Adresskleber

TOREX SEMICONDUCTOR

NEW PRODUCT CATALOG 2011

2 XCL206 SeriesInductor Built-in Step-Down “micro DC/DC” Converters

3 XC9519 SeriesDual Output Step-Up/Inverting DC/DC Converter

4 XC9516 SeriesTriple Output Power Supply for TFT-LCD

5 XC9135 Series1A Driver Transistor Built-In, Multi Functional Step-Up DC/DC Converters

6 XCM526 Series3A 16V Driver Transistor Built-In Step-Down DC/DC Converter

7 XC6224 Series1.2V Low Voltage Operation,150mA High Speed LDO Voltage Regulator

8 XC6420 Series150mA Dual Ultra Small LDO Regulator with ON/OFF Switch

9 XC2401 Series1.6 GHz Low Noise Amplier

10 XC3330 Series3-Axis Accelerometer with Serial Output Interface

11 XBP06V Series Transient Voltage Suppressor (TVS)

12 XC6408 Series28V Operation Voltage Regulator with Voltage Detector

13 XC6217 Series High Speed “Green Operation” LDO Voltage Regulators

14-19 Selection Guide

20 PACKAGE INFORMATION

XCL206B183AR-G XCL206B183AR-G

Ripp

le V

olta

ge：

Vr[ m

V]

100

80

60

40

20

0

XCL206(PWM/PFM)

Effic

ency：

EFFI[ %]

100

80

60

40

20

0

IOUT =10mA

Green : VOUT 10mV/divRed : Inductor Current 100mA/div

IOUT =50mA IOUT =200mA

VIN =4.2VVIN =3.6VVIN =2.4V

Output Current [mA]10 100 100010.1

Output Current [mA]10 100 100010.1

VIN =4.2VVIN =3.6VVIN =2.4V

XCL206B333AR-GINDUCTOR

IC

80.060.0 64.0 68.0 72.0 76.0

122

124

126Y-AXIS (mm)

128

130

132

122

124

126

128

130

132

7273

Hight (m

m)

7273

7273

100

102

104

106

X-AXIS(m

m)108

110112

40.0 44.0 48.0 52.0 56.0

[dBµV]

100102

104106

108110

112

120

118

122

124Y-AXIS (mm)

126

128

130

120118

122

124

126

128

130

7273

Hight (m

m)

108

110

112

114

X-AXIS(m

m)116

118120

108110

112114

116118

120

XCL206B333AR-G Regular step-down DC/DC(separate-coil type)

Low radiant noise

High radiant noise

Frequency Range：50～ 500MHzIOUT=200mAIdeal in communication devices

25.055.0 45.0105.0 95.0 75.0 65.0

[]

LDO XC6210(1.8×2.0mm)

85 36

micro DC/DCXCL206(2.0×2.5mm)

VIN=3.6V→VOUT=1.8V@300mA

Make thermal design easy

IIN=183mA VOUT=1.8VIOUT=300mAmicro DC/DC

XCL206

3.6V750mAh

Li-Ion 82% efficiency for a dramatic reduction in current from battery

Formula：IIN×3.6×0.82＝0.3×1.8

2 TOREX SEMICONDUCTOR

Features

Input Voltage Range 2V～6V Oscillation Frequency 3MHz

Output Voltage Select 0.8V～4V (0.05V increments) External Capacitor CIN=4.7µF, CL=10µF

Maximum Output Current 600mA Quiescent Current PWM/PFM Auto, Iq=21µA

Efciency 82%@VIN=3.6V→VOUT=1.8V@300mA Package Size 2.5×2.0×1.0

CL-2025

CamcorderHead SetMobile Phone

Portable Gaming

Digital Camera

600 mA step-down DC/DC converters with an integrated coil in a unique structure.A high-efciency power circuit can be easily built by adding two external ceramic capacitors.

Inductor Built-in Step-Down “micro DC/DC” Converters

XCL206 Series

2.0±

0.1

2.5 ±0.1

Same as a voltage regulator in appearance Simple circuit configuration with two capacitors

Dual achievement of high efficiency and low ripple voltage over a wide output current range of 1mA to 600mA.

Unique structure reduces radiant noiseCan also be used without concern in communication modules

Do you have difficulty with heat treatment in voltage regulators?Solve the problem without changing the space

Boots Output Ripple Voltage vs Output Current

Ripp

le V

olta

ge[ m

A]

Output Current [mA]

70

60

50

40

30

20

10

0101 100 1000

XC9519(TOREX)

Burst Mode Type

VIN =2.7V

PWM/PFM Mode

Inverter Output Ripple Voltage vs Output Currentfff

Ripp

le V

olta

ge[ m

A]

Output Current [mA]

70

60

50

40

30

20

10

0101 100 1000

XC9519(TOREX)

Burst Mode Type

VIN =2.7V

PWM/PFM Mode

Effic

ienc

y[ %]

Output Current [mA]

100

90

80

70

60

50

40

30

20

10

01010.1 100 1000

PWM VOUT P =5.0VPWM VOUT N=5.0V

PWM/PFM VOUT P =5.0VPWM/PFM VOUT N=5.0V

VIN =3.6V

High efficiency

up to 500 mA!

XC9519

(＋)

(－)

currentsource

OLED

ITO

switch

row address bus

The circuit of AMOLED

data busCathode

Organic Layers

Anode

TFT Matrix

Single Pixel

NBFPNE

PGND

RFBP1

LP

VDD

XC9519

FBPLXP

ENN

BSW

VREF

LXN

PVIN

AVIN

AGND

SBDP

CIN_A

RFBP2

CFBP

LN

RFBN2

RFBN1 CFBN

CLP

CLN

SBDN

VOUTP

CL_VR

GAINP

RZN

CZP CZN

RZP

GAINN

VOUTP

CIN_P

VOUTN

MODE

VOUTN

SWP

ENP

BSW

0V

0V

VIN

BSW pin prevents inrush current

TOREX SEMICONDUCTOR 3


Features

Input Voltage 2.7V～5.5V Output Current ±500mA@VIN=3.7V, VOUT=±5.0V

Positive Output Voltage VIN＋0.2V～15V (accuracy±1%@25) ±200mA@VIN=3.7V, VOUT=±15V

Negative Output Voltage －15V～－2.0V (accuracy±1%@25) Protection Circuits Inrush Current Protection, Over Current Limit (Integral Latching), Short

VIN－VOUTN＋VFN≦20V Protection Latching UVLO, Thermal Shutdown, Over Voltage Protection

Oscillation Frequency 1.2MHz Package QFN-24

QFN-24

Organic EL DisplayE-paper

The XC9519 Series of DC/DC converter ICs consists of a step-up DC/DC converter and a reverse polarity DC/DC converter. Featuring a low ripple voltage, fast transient response, and high-precision output voltage, these converters are designed for active-matrix organic light-emitting diode (AMOLED) displays.

Dual Output Step-Up/Inverting DC/DC Converter

XC9519 Series

4.0±

0.1

4.0 ±0.1

Symbol VOUTP: Output voltage of the step-up DC/DC converter

VOUTN: Output voltage of the Inverting DC/DC converter

External components LP, LN=3.3µH (VLF5014S-3R3M2R0) CLP, CLN=18.8µF (C2012JB1A475M*4)

CIN_P, CIN_SW=4.7µF (C2012JB1A475M) SBP, SBN：CMS03

Provides a bias voltage with low ripple voltage in any current range, stabilizing image quality.

Provides a high-efficiency dual power supplyWhen VIN = 3.6V and VOUT = ±5V, up to ±500mA is supported Designed for active matrix OLED

XC9516 Efficiency VIN =VCE､ VSRC =9.0V､ fOSC =1MHz、VGL=－5V、VGH=12VI GH =1mA､ I GL =1mA

Effic

ienc

y：EF

FI[ %]

I OUT [mA]

100VIN =2.5V

90

80

70

60

50

40

30

20

10

0101 100 1000

VIN =3.3V

VIN =4.0V

VIN =5.5V

Ta=25､ VIN =VCE =2.5V､ VSRC =9.0V､ VGL =－5V､ VGH =12VIOUT =100mA､ I GH =－10mA､ I GL =10mA

1µs /div

VSRC20mV/div

VGL20mV/div

VGH20mV/div

Ripple Rejection Rate vs. Output Current

2.0ms/div

VGH =3.0V/div

VSRC =3.0V/div

VIN =3.0V/div

VGL =3.0V/div

Ta=25､ VIN =VCE =2.5V､ VSRC =9.0V､ VGL =－5V､ VGH =12VIOUT =1mA､ I GH =－1mA､ I GL =1mA

Output Voltage Monitor

VGL

VSRC

Li＋

VGH

RANGE FROM300kHz～1.2MHz

TOREXXC9516

LCD PANEL

SOURCE -DRIVER ICs

POSITIVECHARGE PUMP

NEGATIVECHARGE PUMP

CONTROLLOGIC

STEP-UPCONTROLLER

VARIABLEFREQUENCY

INCLUDES LOAD-

BREAKINGFUNCTION

WIDE INPUTVOLTAGE RANGE

VIN=2.5V～5.5V

GATE-DRIVER ICs


Features

Input Voltage Range 2.5V～5.5V Switch Over-Current Protection 1.3A

Maximum Output Voltage 19V (Step-up DC/DC) Short-Circuit Protection Step-up DC/DC, Positive and Negative Charge Pump

Output Voltage Accuracy ±1.5% Thermal Shutdown 150Oscillation Frequency 300kHz～1.2MHz (Adjustable) UVLO 1.87V

Over Voltage Protection Step-up DC/DC 21V Package QFN-20

QFN-20

GPS Navigation

Notebook PCLCD TV

The XC9516 Series consists of a step-up DC/DC converter and positive-voltage and negative-voltage charge pumps that are ideal especially for small active-matrix thin-lm transistor LCD (TFT-LCD) displays. An external P-ch MOSFET can be added for load breaking and the frequency can be varied by external resistor, enabling optimization of component selection and efciency for the application.

Triple Output Power Supply for TFT-LCD

XC9516 Series

4.0±

0.1

4.0 ±0.1

Ideal for TFT-LCD displaysVariable frequency, includes control pin

Low ripple output stabilizes image quality Control of startup sequence is possible

High efficiency enables energy-saving system design

GND

GND VIN

CIN

USP-10B LREV.2.0

RFB2/Cdf

XC9131/35/36

VOUT

CFB

RFB1

EN FC

ICCDD

MODE

LX

CL

RFO

FRONT BACK

Ta=25

Effic

ienc

y：EF

FI[ %]

Output Current： I OUT [mA]

100

90

80

70

60

50

40

30

20

10

01010.1 100 1000

PWM VIN =1.8V

PWM VIN =3.0V

PWM/PFM VIN =1.8V

PWM/PFM VIN =3.0V

Efficiency vs Output Current

DisconnectController

UVLO

Detectiondelay

function

VD

LxVBAT

EN

GND

VOUTVOUT

VOUT

XC9135

Internalload

breakingfunction

InternalP-ch

transistorOutputvoltagefixed

internally

電池

電池

DC/DC

Lx

EN

GND

VDD

FB

ExternalVD notneeded

Electronic Dictionary



Features

Input Voltage Range 0.65V～5.5V Control PWM or Auto PWM/PFM

Output Voltage Range 1.8V～5.0V (0.1V increments VOUT) Load Transient Response 100mV@VOUT=3.3V, VIN=1.8V, IOUT=1mA→200mA

(VFB=0.50V±10mV Set up with external components) Protection Circuits Thermal Shutdown, Over-current limit, Integral latch method

Oscillation Frequency 1.2MHz (accuracy±15%) Function Soft-start, Load Disconnection Function, CL Auto Discharge

Input Current 1.0A Flag-out Function, UVLO

Output Current 500mA@VOUT=3.3V, VIN=1.8V (TYP.) Package USP-10B

USP-10B

Wireless Mouse

Digital CameraMP3 Player

The XC9135 Series of step-up synchronous rectication-type DC/DC converters incorporate a 0.2Ω (typical) N-ch driver Tr and a 0.2Ω (typical) P-ch synchronous rectier switch Tr.If the battery voltage falls, the UVLO function of the XC9135 Series can reduce leakage of alkaline battery uid by stopping the operation of the IC.In addition, the UVLO detection delay function can be used to reduce false detections caused by transient voltage drops in the input voltage.

1A Driver Transistor Built-In, Multi Functional Step-Up DC/DC Converters

XC9135 Series

2.9±

0.05

2.6 ±0.05

Provides various internal functions,minimal external components, and simple circuit design

Basic layout exampleA demo board can be provided

Synchronous rectification with low ON-resistanceHigh-efficiency step-up voltage provided by the circuit

Achieves miniaturization!

Efficiency vs Output Current Ta=25

Effic

ienc

y：EF

FI[ %]

Output Current：IOUT [mA]

100VIN =5.0V

90

80

70

60

50

40

30

20

10

010.1 10 100 1000 10000

CE FB

VSS

EXT/

GATE

NC

DRAIN

NC

VIN

VIN

SOURCE

SOURCE P-chPOWER MOSFET

Step-DownDC/DC Controller

SOURCE

16V Input

3A DriverTransistor

Built-In

Small multi-chip package


Features

Operating Voltage Range 4.0V～16.0V Soft-Start 4ms internally fixed and externally set

Output Voltage Externally Set Range 1.2V～ (VFS= 0.9V±1.5%) Protection Circuits Short-circuit protection

Maximum Output Current 3.0A ON Resistance (Power MOS) 70mΩ VGS=－4.5V, 47mΩ VGS=－10.0V

Oscillation Frequency 500kHz, 1MHz Package USP-12B01

USP-12B01

MP3 PlayerPortable GamingLCD TV

The XCM526 series is a multi-module IC which includes a step-down DC/DC controller IC and P-channel power MOSFET. The IC enables a high efciency, stable power supply with an output current up to 3A.

3A 16V Driver Transistor Built-In Step-Down DC/DC Converter

XCM526 Series

2.8±

0.08

2.3 ±0.08

A high-efficiency circuit is provided using a dedicated P-ch Power MOSFET

A evaluation board can be provided to meet the conditions of the user

High-performance multi-module product combines two chips with different processes

2-chip structure realizes a small 2.3 × 2.8 × 0.6 mm module

Mold resinIC Chip 1

IC Chip 2

Rear-side tab 1

Rear-side tab 2Isolation

Structure drawing

XC6224A121 Ta=25､ VIN =3.0VDC＋0.5Vp-pACCIN =CI =0.47µF

Ripp

le R

ejec

tion

Rate：

RR[ d

B]

Ripple Frequency：f [Hz]

100

IOUT =30mA90

80

70

60

50

40

30

20

10

01k 10k 100k100

IOUT =100mA

XC6224A121 CIN =CL =0.47µF

Drop

out V

olta

ge：

Vdif[ V]


1000－40

25

85800

600

400

200

025 50 75 100 125 1500

XC6224A121 Ta=25､ IOUT =50mA⇔100mA､ tr= tf=0.5µ sVIN =2.25V､ CIN =CL =0.47µF

Outp

ut C

urre

nt：

IOUT[ m

A]

Time [10µs/div]

500

Output Voltage

450

400

350

300

250

200

150

100

50

0

Output Current Outp

ut V

olta

ge：

VOUT[ V]

1.40

1.35

1.30

1.25

1.20

1.15

1.10

1.05

1.00

0.95

0.90

VIN VOUT

VSSCE

CIN =0.47µF(ceramic)

CL =0.47µF(ceramic)

[email protected]

IC



Features

High Accuracy ±1.5% (Output Voltage 1.25V～3.0V) Maximum Output Current 150mA±20mV (Output Voltage 0.8V～1.20V) Dropout Voltage 210mV@150mA (VOUT=2.8V)

Low Power Consumption 33µA (TYP.) Operating Voltage Range 1.2V～3.6V

High Ripple Rejection 70dB (1kHz) Packages USPN-4B02, SSOT-24, SOT-25

USPN-4B02

MP3 PlayerDigital Camera

Mobile Phone

The XC6224 Series of ultra-small (0.95 mm×0.75 mm), high-speed LDO regulators are capable of 1.2V low-voltage operation. Stable operation is achieved using a small 0.47µF capacitor (CL) for phase correction, making these regulators ideal for use as a dedicated local power supply near a logic LSI.

1.2V Low Voltage Operation,150mA High Speed LDO Voltage Regulator

XC6224 Series

0.75

± 0.05

0.95 ±0.05

Stable output using a small capacitor High ripple rejection at 1.2V

CIN/CL ＝ 0.47µF the performance of stable output

Low input, low voltage drive

±0.02V High accuracy

High load transient response even at a low supply current

100 mA output is supported at 1.8V input and 1.2V output

Internalswitch fordischarge

CL=1µF(ceramic)

CIN=1µF(ceramic)

CL=1µF(ceramic)

EN1VOUT1

VOUT2EN2

VIN VSS

XC6420(VOUT =1.8V) Ta=25､ VIN =3.0V＋0.5Vp-pACCIN =0.1µF(ceramic)､ CL =1.0µF(ceramic)

Ripp

le R

ejec

tion

Rate：

RR[ d

B]

Ripple Frequency：f [kHz]

100

IOUT =30mA

90

80

70

75dB

60dB

60

50

40

30

20

10

01 10 10001000.1

IOUT =100mA

IOUT =1mA

IOUT =0.1mA


Wide variety of voltages are standard

Internal CL discharge

Features

Maximum Output Current 150mA Low Power Consumption 55µA/ch (TYP.)

Dropout Voltage 210mV@IOUT=150mA (VOUT=3.3V) High Ripple Rejection 75dB@1kHz

Operating Voltage Range 1.6V～5.5V Protection Circuits Current Limit, Short-circuit protection

Output Voltage Range 1.2V～3.6V Packages USPN-6, SOT-26

VR1［V］ VR2［V］ VR1［V］ VR2［V］ VR1［V］ VR2［V］

01 1.20 1.20 16 1.80 2.85 31 1.50 2.8002 1.20 1.50 17 1.80 3.00 32 1.80 2.8003 1.20 2.50 18 3.00 1.80 33 2.80 2.8004 1.20 2.85 19 1.80 3.30 34 2.80 3.0005 1.20 3.00 20 2.50 2.50 35 2.80 3.3006 1.20 3.30 21 2.50 2.80 36 1.20 3.6007 1.50 1.50 22 2.50 2.85 37 3.60 1.2008 1.50 1.80 23 3.30 1.50 38 1.20 2.8009 1.50 2.50 24 2.50 3.00 39 3.30 2.0010 1.50 2.85 25 2.50 3.30 40 3.00 3.3011 1.50 3.00 26 2.85 3.00 41 3.30 3.3012 1.50 3.30 27 2.85 3.30 42 1.30 1.5013 1.80 1.80 28 3.00 3.00 43 2.60 2.8014 1.80 2.50 29 1.20 1.80 44 3.10 3.3015 2.85 2.85 30 1.30 2.80 45 1.50 2.60

USPN-6

Digital CameraMP3 PlayerPortable

GamingMobile Phone

The XC6420 series is a dual ultra small CMOS LDO regulator, mounting 150mA 2-channel high speed LDO.The series features high accuracy, high ripple rejection and low dropout voltage.The series is capable of high density board installation by the ultra small package of two low on-resistance regulators.

150mA Dual Ultra Small LDO Regulator with ON/OFF Switch

XC6420 Series

1.3±

0.05

1.3 ±0.05

High Ripple Rejection: PSRR 75dB

For other output voltage combinations, please contact your local Torex sales ofce or representative.

Cbias=10nF

PIN 6.2nH

9.1nH

100pF POUTRF_OUTRF_IN

VDD

VDD

VSS

Fixed Bias

Cbias=10nF

PIN 6.2nH

Rbias

9.1nH

100pF POUTRF_OUTRF_IN

VDD

VIN

VSS

Self Bias



Features

Noise Figure NF=0.69dB (TYP.) @1.575GHz Operation Voltage Range 1.14V～1.26V (Fixed Bias )

Low Power Consumption 6.6mW (TYP.) @VDD=1.2V, Fixed Bias Output CMOS Output, 50Ω driver built-in

High Gain S21=15dB (TYP.) @1.575GHz Package USPN-4B02

UNIT［dB］

PARAMETER SYMBOL NF PRIORITY DESIGN NF&S22 PRIORITY DESIGN S21&S22 PRIORITY DESIGNNoise Figure NF 0.69 0.75 0.99 Power Gain S21 15.20 16.37 18.00 Input reection coefcient S11 5.89 5.48 4.00

Output reection coefcient S22 7.05 10.07 11.50

6.2n

9.1n

100p 11n

1.5p 7.5n

100p 10n

2.6p 4.3n

100p

VIN［V］ 3.00 2.85 1.80Rbias［Ω］ 560 470 160

*Rbais should be in ±1% tolerance and ±200ppm/ temperature stability.

USPN-4B02

GPS Navigation

Mobile Phone

The XC2401A8167R-G is an ultra-low-noise amplier (LNA) with low operating voltage, low noise gure (NF), low power consumption using CMOS process. The device offers easy output matching to 50Ω for input and output with less external components.

1.6 GHz Low Noise Amplifier

XC2401 Series

0.75

± 0.05

0.95 ±0.05

Supports a minimum operating voltage as low as 1.2V, as well as power voltages of 1.8V and 2.85V by means of a self bias created by adding one resistor

External constant setting examples, NF and Gain S21 adjustable by circuit configuration

FreefallDetection

VCC

VCC =2.2V～3.6V

XC3330

I2C

ApplecationMPU

Interrupt

VDD

1.7V～VCC

HDD MPU

VifReset

SCL

SDA

AO Address(fix)

INT

Fall Alarm

FreeFall Det. Power ON

FreeFallFONGND

Acceleration

Vibration or MotionGravity

TurnDetection

InclinationDetection

VibrationDetection

MotionDetection

Free FallDetection

ShockDetection

Shock


High 12-bit resolution widens user applications

Features

Input Voltage Range 2.2V～3.6V (Interface：1.7V～) Resolution 12bit

Low Power Consumption Active 0.27mA (TYP.) Operation Modes User selectable full scale±2g, ±4g

Stand by 5µA (MAX.) (T=65) Freefall Detection Intelligent function for standalone use

Interface I2C Package LCC-10

FS：＋/－2g

Resolution of ADC Angle (°) Acceleration (mg)

6bit 3.58 62.5

8bit 0.86 15.6

10bit 0.22 3.9

12bit 0.06 1.0 *Approximate value when the measurement axis is the horizontal direction

LCC-10

Projector GPS Navigation

Notebook PCCamcorder

The XC3330 is an ultra small and low supply current 3-axis accelerometer, produced by MEMS (Micro Electro Mechanical System) technology. Output interface is two-wired serial interface.

3-Axis Accelerometer with Serial Output Interface

XC3330 Series

2.9±

0.2

2.9 ±0.2

Angle detection (detects the vertical direction based on gravity, and detects the angle from the vertical)

Acceleration detection

・ Angle detection(detects the vertical direction based on gravity, and detects the angle from the vertical)

・Acceleration of a high-end sports car (0km⇒100km: About 5 seconds): 570mg

・Entering a typical freeway (40km ⇒100km: About 5 seconds): 340mg

・Mild acceleration /deceleration during city driving

・1/50 of 340mg is 6.8mg (this level of resolution is required)

Dedicated fall detection feature protects hard disk data

Application of accelerometer

Supports projectors

Supports car navigation

Cathode

Cathode

Cathode

Cathode Cathode

Cathode

Cathode

Cathode

CathodeAnode

Anode Anode

Cathode

TAB. Anode

USP-4

USP-3

SOT-25

XBP06V

ESD Sensitive device

GND

Connect between GNDand the transmission linethat is connected to theESD sensitive device.

Static electricity intrudes

Reve

rse

Curr

ent：

IR[µ

A]

Reverse Voltage：VR [V]

0

Ta=250.1

0.01

0.001

0.00011 2 3 64 50

Ta=－25

Ta=75

Ta=125

Reverse Current vs Reverse Voltage



The XBP06V Series of transient voltage suppressors protects portable devices and electronic devices from overvoltage due to static electricity. A small package makes these suppressors ideal for portable communication devices, which are becoming increasingly smaller and lighter.

Internal connection schematic: Two elements or four elements can be selected

Features Ta=25

PARAMETER SYMBOL TEST CONDITIONLIMITS

UNITSXBP06V4E4GR-G XBP06V4E2HR-G XBP06V1E4MR-G

Peak Pulse Power Ppk tp=8/20µs 70 70 200 WPower Dissipation Pd 120 120 250 mWJunction Temperature Tj 150 150 150 Storage Temperature Range Tstg －55～+150 －55～+150 －55～+150 ESD Durability (Maximum Ratings) Vpp Test Condition　IEC61000-4-2 8 8 9 kVBreakdown Voltage (MIN.) VBR IR=5mA 6.4 6.4 6.1 VLeakage Current (MAX.) IRM VRM=5V 1 1 2.5 µAForward Voltage (MAX.) VF IF=10mA 1.25 1.25 1.25 VInter-Terminal Capacity (TYP.) Ct VR=0V, f=1MHz 40 40 170 pF

USP-4 USP-3 SOT-25

MP3 Player Digital CameraPDAMobile

Phone

Transient Voltage Suppressor (TVS)

XBP06V Series

1.2±

0.08

1.2±

0.08

2.8±

0.2

1.6 ±0.081.2 ±0.08

2.9 ±0.2

Example of application to TVS: Protects the circuit from static electricity

Low leakage current

100000

10000

1000

100

10100 1000 1000010

Rele

ase

Dela

y TI

ME[µ

s]

Cd connected Capacitance [pF]

2

1.5

1

0.5

08 12 2816 20 240 4

VD S

uppl

y Cu

rren

t：ID

SS[µ

s]

Input Voltage：VIN [V]

XC6408E(VDF=4.5V)

VIN

VDOUT

VROUT

VIN

VSS

バッテリー

Cd

R11CFB

VoltageReference

VoltageReference

VoltageReference

ErrorAmp

CurrentLimit

ThermalProtection

－

＋

－

＋

－

＋

R12

16.8V 5V

R21

R22

Thermalshutdownfunction

ResetTime

VD OpenDrain

Output

VROUTVoltageDetect

Thermalshutdownfunction

VIN

VDOUT

VROUT

VIN

VSS

VSEN

バッテリー

R11

R21

R22

CFB

POWERON/OFF

VoltageReference

ErrorAmp

CurrentLimit

ThermalProtection

－

＋

VoltageReference

－

＋

R12

16.8V 5V

VD OpenDrain

Output

Externalvoltage

monitoring


Features

Low Power Consumption XC6408D　TYP. 9.5µA (VROUT=12V, VDF=11V) Detect Voltage Range 2.0V～16.0V (0.1increments)

XC6408E　TYP. 8µA (VROUT=12V, VDF=11V) VD Output Open drain output makes design easy

Maximum Output Current 150mA (VIN=VROUT+3.0V) External capacitor 1.0µF (Ceramic capacitor)

Dropout Voltage 175mV@IOUT=20mA (VROUT=12V) Operating Temperature －40～85Input Voltage Range 2.0V～28.0V Packages SOT-89-5, SOT-25, USP-6C

Output Voltage Range 2.0V～18.0V (0.1V increments) Protection Circuits Short-circuit protection, Thermal shutdown

USP-6C

LCD TVPrinterSet Top BoxGPS Navigation

Notebook PC

The XC6408 series is a positive voltage regulator IC manufactured using CMOS process with 28V operation voltage.The XC6408 D Series and E Series are available for selection.

28V Operation Voltage Regulator with Voltage Detector

XC6408 Series

1.8±

0.05

2.0 ±0.05

Outputs a reset signal from the VDOUT pin when the output voltage falls below the set level.

*You can set any delay time with a small capacitor

The D Series monitors regulator output voltage

On the D Series, the reset time can be set by an external capacitor

When regulator output is OFF on the E Series, VD standalone operation takes place for a low supply current

The E Series can monitor any external voltage of an IC

XC6217(3.0V) High Speed Mode VIN =VCE =4.0V､ VGO =VINCIN =CL =1.0µF(ceramic)

Outp

ut V

olta

ge：

VOUT[ V]


3.5

3

2.5

2

1.5

1

0.5

0

Ta=25Ta=- 40

Ta=85

100 200 4003000

XC6217(3.0V) High Speed Mode Ta=25､ VIN =VCE =4.0V､ VGO =VINTr=Tf=5µ s､ CIN =CL =1.0µF(ceramic)

Outp

ut V

olta

ge：

V OUT[ V]

Time [500µ s/div]

3.1

Output Voltage3.0

2.9

2.8

2.7

2.6

2.5

Outp

ut C

urre

nt：

I OUT[ m

A]

300

250

200

150

100

50

0

Output Current100mA

10mA

XC6217(3.0V) High Speed Mode Ta=25､ VIN =VCE =4.0VDC +0.5VP-PACVGO =VIN､ IOUT =30mA､ CL =1.0µF(ceramic)

Ripp

le R

ejec

tion

Rate：

PSRR[ d

B]

Ripple Frequency：f [kHz]

80

70

60

50

40

30

20

10

01 10 10001000.01 0.1

CIN=1µF(ceramic)

CL=1µF(ceramic)

Input Input

High SpeedMode Fixed

VOUTVIN

CE GO

VSS

Supp

ly C

urre

nt：

Iss

4.5µA

25µA

8mA MAX.

Output Current：IOUT



A fast load transient response and a good PSRR can be obtained in the high-speed mode.

The foldback current limitter circuit holds short-circuit current down to 30mA and automatically resumes.

When an RF circuit is in sleep mode, the Green Operation function automatically switches to 4.5μA low power mode. The GO pin type is also available if you need to fix the mode at high-speed mode during power-on and other times.

Features

Maximum Output Current 200mA Power Consumption 4.5µA (Low Consumption Mode), 25µA (High Speed Mode)

Operation Voltage Range 1.6V～6.0V PSRR 70dB@f=1kHz

Output Voltage 0.8V～4.0V CE Pin Active High, CL Auto Discharge

Output Voltage Accuracy ±1% (VOUT≧2.0V), ±20mV (VOUT≦1.95V) Type XC6217B (USP-4D) High Speed Mode Fixed Pin (GO pin)

Dropout Voltage 80mV@IOUT=100mA, VOUT=3.0V XC6217D (USPN-4) No GO pin

USPN-4

Digital Camera

Portable Gaming

Mobile Phone

The Green Operation function automatically switches between high-speed mode and low-power mode depending on the amount of drive current (XC6217 output current).Ideal for processor circuits and RF circuits with a sleep mode.

High Speed “Green Operation” LDO Voltage Regulators

XC6217 Series

0.9±

0.05

1.2 ±0.05

USP-4D

1.2±

0.08

1.6 ±0.08

Selection Guide


Voltage Regulators

SERIES TYPE INPUT VOLTAGE

OUTPUT VOLTAGE ACCURACY

MAXIMUM OUTPUT VOLTAGE

SUPPLY CURRENTDROPOUT VOLTAGE PROTECTION CIRCUITS PACKAGE

Typical Standby

XB1085 High Current ～12V 1.5V, 1.8V2.5V, 3.3V5.0V & ADJ

±1% 3000mA 5000µA ー 1.3V@3A Thermal Protection TO-252

XB1086 High Current ～15V ±1% 1500mA 5000µA ー [email protected]

XB1117 High Current ～10V1.8V, 2.5V3.3V, 5.0V

& ADJ±1% 100mA 6000µA ー 1.2V@1A Thermal Protection SOT-223

XC6201 Low ESR Caps 2.0V～10V 1.3V～6.0V ±2% (1%) 250mA 2.0µA ー 160mV@100mA ー

SOT-25SOT-89USP-6BTO-92

XC6203 High Output Current 2.0V～8.0V 1.8V～6.0V ±2% (1%) 400mA 8.0µA ー 150mV@100mA 300mV@200mA

ー

SOT-23SOT-89

SOT-223TO-92

XC6204Low Noise / High Speed 2.0V～10V

1.8V～6.0V±2% (1%)

300mA70µA 0.1µA 200mV@100mA ー

SOT-25USP-6BSOT89-5XC6205 0.9V～1.75V 150mA

XC6206 Low Quiescent Current 1.8V～6.0V 1.2V～5.0V ±2% (1%) 250mA 1.0µA ー 160mV@100mA ー

SOT-23SOT-89USP-6BTO-92

XC6209 Low Noise / High Speed 2.0V～10V 0.9V～6.0V ±2% 300mA 25µA 0.1µA 200mV@100mA ーSOT-25USP-6BSOT89-5

XC6210 High Current 1.5V～6.0V0.8V～1.5V

±2%500mA

35µA 0.1µA 50mV@100mA ーSOT-25USP-6BSOT89-51.6V～5.0V 700mA

XC6213 Low Noise / High Speed 2.0V～6.0V 1.2V～5.0V ±2% 150mA 35µA 0.1µA 400mV@100mA ー

SSOT-24SOT-25USP-4

USPN-4

XC6214 High Output Current 1.8V～6.0V1.2V, 1.5V1.8V, 2.5V3.0V, 3.3V

±2% 500mA 8.0µA ー 100mV@100mA Thermal Protection SOT-89TO-252

Voltage Detectors

SERIES TYPE DETECT VOLTAGE

HYSTERESIS RANGE ACCURACY OPERATING

VOLTAGESUPPLY

CURRENT OUTPUT On-chip delay circuit PACKAGE

XC61C Low Supply Current 0.8V～6.0V 5%±2%(1%) 0.7V～10V TYP. 0.7µA N-ch Open Drain or CMOS n/a

SSOT-24SOT-23SOT-89TO-92

XE61C Low Supply Current 1.6V～6.0V 5% ±2% 0.7V～10V TYP. 0.7µA N-ch Open Drain or CMOS n/a SOT-23SOT-89

XC61F Built in Delay Circuit 1.6V～6.0V 5% ±2% 0.7V～10V TYP. 1.0µA N-ch Open Drain or CMOS 1ms～50ms

50ms～200ms80ms～400ms

SOT-23SOT-89TO-92

XC61G Small Package 0.8V～6.0V 5% ±2% 0.7V～10V TYP. 0.7µA N-ch Open Drain or CMOS n/a USP-3

XC61H Built in Delay Circuit 1.6V～6.0V 5% ±2% 0.7V～10V TYP. 1.0µA N-ch Open Drain or CMOS 1ms～50ms

50ms～200ms80ms～400ms

SOT-23

XC6101XC6111 Watchdog 1.6V～5.0V

5%±2% 1.0V～6.0V TYP. 5.0µA CMOS

3.13ms25ms50ms100ms200ms400ms1.6s

SOT-25USP-6C0.1%


5%±2% 1.0V～6.0V TYP. 5.0µA N-ch Open Drain SOT-25

USP-6C0.1%


5%±2% 1.0V～6.0V TYP. 5.0µA High Active CMOS SOT-25

USP-6C0.1%


5%±2% 1.0V～6.0V TYP. 5.0µA CMOS

＋High Active CMOSSOT-25USP-6C0.1%


5%±2% 1.0V～6.0V TYP. 5.0µA N-ch Open Drain

＋High Active CMOSSOT-25USP-6C0.1%

XC6116 Manual Reset 1.6V～5.0V 5% ±2% 1.0V～6.0V TYP. 4.0µA CMOS＋High Active CMOS SOT-25

USP-6CXC6117 Manual Reset 1.6V～5.0V 5% ±2% 1.0V～6.0V TYP. 4.0µA N-ch Open Drain

＋High Active CMOS

XC6118 External Delay & VSEN Pin 0.8V～5.0V 5% ±2% 1.0V～6.0V TYP. 0.8µA N-ch Open Drain or CMOS Yes

SOT-25USP-4

XC6119 External Delay 0.8V～5.0V 5% ±2% 0.7V～6.0V TYP. 0.9µA SSOT-24USPN-4

XC6120 Ultra Low Supply Current 1.0V～5.0V 5% ±2% 0.7V～6.0V TYP. 0.6µA N-ch Open Drain or CMOS n/a USP-3SSOT-24

XC6121-24 WatchdogEN pin 1.6V～5.0V 5% ±2% 1.0V～6.0V TYP. 5.0µA N-ch Open Drain User Selectable

from 100, 200 or 400msSOT-25USP-6C



Voltage Regulators





Typical Standby

XC6215 Ultra Low Iq 1.5V～6.0V 0.9V～5.0V ±2% 200mA 0.8µA 0.1µA 320mV@100mA ー

SSOT-24USP-4USP-3SOT-25USPN-4

XC6216XE6216 High Voltage 2.0V～28V 2.0V～12V

ADJ±2% (1%) 150mA 5µA 0.1µA 1500mV@100mA Thermal Protection

TO-252SOT-223SOT-89

SOT-89-5SOT-25USP-6C

XC6217 NEW Green Operation 1.6V～6.0V 0.8V～4.0V±2% (HS)＋2.5%－3.5% (PS)

200mA 4.5µA 0.1µA 80mV@100mA ー

SOT-25SSOT-24USP-4DUSPN-4

XC6218 Low Quiescent Current 1.5V～6.0V 0.9V～4.0V ±2% 200mA 1.0µA ー 200mV@100mA ー USP-3SSOT-24

XC6219 Low Noise / High Speed 2.0V～6.0V 0.9V～5.0V ±2% (1%) 300mA 25µA 0.1µA 200mV@100mA ーUSP-6BSOT-25

SOT89-5

XC6220 High Current 1.6V～6.0V 0.8V～5.0V ±1% 1000mA 8.0µA 0.1µA 20mV@100mA Thermal ProtectionInrush Current Protection

USP-6CSOT-25

SOT-89-5

XC6221 Low Noise / High Speed 1.6V～6.0V 0.8V～5.0V ±2% (1%) 200mA 25µA 0.1µA 80mV@100mA ー

SOT-25SSOT-24USP-4

USPN-4

XC6222 Low Noise / High Speed 1.7V～6.0V 0.8V～5.0V ±1% 700mA 100µA 0.1µA 120mV@300mA Thermal ProtectionUSP-6CSOT-25

SOT-89-5

XC6223 Low Noise / High Speed 1.6V～5.5V 1.2V～4.0V ±1% 300mA 100µA 0.1µA 240mV@300mA Thermal ProtectionInrush Current Protection

SOT-25SOT-89-5SSOT-24

USPQ-4B03USP-4

XC6224 NEW High Speed 1.2V～3.6V 0.8V～3.0V±1.5%±20mV 150mA 33µA 0.01µA 210mV@150mA ー

USPN-4B02SSOT-24SOT-25

XC6225 Low Output Current 2.5V～6.0V 0.8V～5.0V ±2% 30mA 25µA 0.1µA 70mV@30mA ーSOT-25

SSOT-24USP-4

XC6501 No CL Cap 1.4V～6.0V 1.2V～5.0V ±2% 200mA 13µA 0.1µA 150mV@100mA ー

USP-3USP-4

SSOT-24SOT-25USPN-4

XC6503 CL Less 1.7V～6.0V 1.2V～5.0V±1.0%±20mV 500mA 15µA 0.01µA 190mV@300mA Thermal Protection

USP-4SOT-25

SOT-89-5TO-252

XC6601 Ultra Low Dropout 1.0V～3.0V 0.7V～1.8V ±20mV 400mA 25µA 0.01µA 35mV@100mA Thermal ProtectionUSP-6CSOT-25

SOT89-5

XC6701 High Voltage / High Speed 2.0V～28V 1.8V～18V ±2% 150mA 50µA 0.1µA 300mV@20mA Thermal Protection

TO-252SOT-223SOT-89

SOT-89-5SOT-25USP-6C

XC62KN General Purpose－2.1V～－10V MAX. －2.1V～6.0V ±2% (1%) 100mA 3.0µA ー 380mV@100mA ー

USP-6BSOT-23SOT-89TO-92

Voltage Regulators Dual Type





Typical Standby

XC6411 Dual Channel Low Noise / High Speed 1.5V～6.0V 0.9V～5.0V ±2% 200mA 0.8µA ー 320mV@100mA ー SOT-25

XC6412 Dual Channel Low Noise / High Speed 1.5V～6.0V 0.9V～5.0V ±2% 200mA 0.8µA 0.1µA 320mV@100mA ー SOT-26

XC6415 Dual Channel Low Noise / High Speed 1.5V～6.0V 0.8V～5.0V ±1% 200mA 28µA 0.1µA 95mV@100mA ー

USP-6CSOT-26USPN-6

XC6416 Dual Channel Green Operation 1.6V～6.0V 0.8V～4.0V ±1% 200mA 10µA 0.1µA 95mV@100mA ー USP-6C

SOT-26

XC6419 Dual Channel Low Noise / High Speed 1.5V～6.0V 0.8V～5.0V ±2% (1%) 300mA/ch1

100mA/ch228µA/ch123µA/ch2 0.1µA 115mV@200mA/ch1

115mV@50mA/ch2ー USP-6C

SOT-26

XC6420 NEW Dual Channel High Speed 1.6V～5.5V 1.2V～3.6V ±2% 150mA 55µA/ch ー 190mV@150mA ー USPN-6SOT-26

Selection Guide


Voltage Regulators Voltage Detect Type




SUPPLY CURRENTDROPOUT VOLTAGE DETECT VOLTAGE PACKAGE

Typical Standby

XC6402 Low V-Drop 1.5V～6.0V 0.8V～5.0V ±2% 700mA 35µA ー 50mV@100mA 0.8V～5.0VUSP-6BSOT-25

SOT89-5

XC6403 Semi-custom 2.0V～6.0V 0.9V～5.6V ±2% 300mA 35µA ー 200mV@100mA 0.9V～5.5VUSP-6BSOT-25

SOT89-5

XC6404 Delay circuit external 2.0V～6.0V 0.9V～5.1V ±2% 500mA 35µA ー 200mV@100mA 0.9V～5.5VUSP-6BSOT-25

SOT89-5

XC6405 Delay circuit external 2.0V～6.0V 0.9V～5.1V ±2% 500mA 90µA 0.1µA 200mV@100mA 0.9V～5.5V SOT-25SOT89-5

XC6408 NEW High Input Voltage 2.0V～28V 2.0V～18V ±2% 150mA 8µA 0.1µA 175mV@20mA 2.0V～16VUSP-6CSOT-25

SOT89-5

XC6413 Semi-custom 2.0V～10V 0.9V～5.5V ±2% 300mA 35µA ー 200mV@100mA 0.9V～6.0V USP-6BSOT-25

SOT89-5XC6414 Semi-custom 2.0V～10V 0.9V～5.5V ±2% 500mA 35µA ー 200mV@100mA 0.9V～6.0V

Load Switch




SUPPLY CURRENTON/OFF FUNCTION NOTE PACKAGE

Typical Standby

XC8102 High Side Line Switch 1.2V～6.0V 0.35Ω(VIN=2.9V)

±2% 400mA 3µA 0.1µA High Active Output Discharge Function

USP-4USPN-4SSOT-24SOT-25

Inductor Built-in micro DC/DC Converters

SERIES CONTROL EFFICIENCY INPUT VOLTAGE OUTPUT VOLTAGE ACCURACY OSCILLATION FREQUENCY OUTPUT CURRENT PACKAGE

XCL205 Synchronous PWM

TYP. 85% 2.0V～6.0V 0.8V～4.0V ±2% 3MHz 600mA CL-2025XCL206 NEW Synchronous, PWM/PFM

XCL207 Synchronous PWM or PWM/PFM

Step-Up DC/DC Converters/Controllers

SERIES CONTROL EFFICIENCY INPUT VOLTAGE

OUTPUT VOLTAGE ACCURACY OSCILLATION

FREQUENCY FUNCTION PACKAGE

XC6371 PWMTYP. 85% 0.9V～10V 2.0V～7.0V ±2.5%

50kHz100kHz180kHz(±15%)

100mA (VIN=3.0V, VOUT=5.0V)SOT-89

SOT89-5USP-6BXC6372 PWM/PFM

XC9110PFM TYP. 87% 0.9V～10V 1.5V～7.0V ±2.5% 100kHz (±15%) 200mA (VIN=2.4V, VOUT=3.3V)

SOT-23SOT-25USP-6CSOT-89XC9111

XC9119 PWM TYP. 86% 2.5V～6.0V ADJ=1.0V ±2% 1.0MHz 50mA (VIN=3.6V, VOUT=15V)FB=1.0V (2.5V～19.5V)

SOT-25USP-6C

XC9128 SynchronousPWM

PWM/PFMTYP. 93% 0.8V～6.0V ADJ=0.45V 0.45V

±10mV 1.2MHz (±15%)

700mA (VIN=3.7V, VOUT=5.0V)With Adapter Enable

FB=0.45V (1.8V～5.3V)

MSOP-10USP-10B

XC9129 Without Adapter EnableFB=0.45V (1.8V～5.3V) SOP-8

XC9131Synchronous

PWMPWM/PFM

TYP. 93% 0.65V～5.5V 1.8V～5.0V ±10mV 1.2MHz (±15%)500mA (VIN=1.8V, VOUT=3.3V)100mV (VIN=1.8V, VOUT=3.3V)

IOUT=1mA→200mAUSP-10B

XC9135 NEWSynchronous

PWMPWM/PFM

93% 0.65V～5.5V 1.8V～5.0V ±2% 1.2MHz ー USP-10B

XC9133 PWM TYP. 85% 2.5V～6.0V 2.5V～17.5V ±5% 1.0MHz Backlight LED Driver SOT-25USP-6C

XC9103 PWM

TYP. 85% 0.9V～10V 1.5V～30VADJ=0.9V

±2%

100kHz180kHz300kHz500kHz

400mA (VIN=1.8V, VOUT=3.3V)FB=0.9V (1.5V～30V)

SOT-25USP-6BXC9104 PWM/PFM

XC9105 PWM/PFM

XC9120 PWM

TYP. 85% 0.9V～6.0V 1.5V～30VADJ=0.9V

±2% 100kHz 80mA (VIN=3.6V, VOUT=15V)FB=0.9V (1.5V～30V)

SOT-25USP-6CXC9121 PWM/PFM

XC9122 PWM/PFM



Step-Down DC/DC Converters/Controllers


OUTPUT VOLTAGE ACCURACY OUTPUT CURRENT OSCILLATION

FREQUENCYSUPPLY CURRENT

PACKAGEIq (TYP.) CE OFF

XC9213 Synchronous PWM/PFM TYP. 93% 4.0V～25V ADJ=1.0V ±1.5% 5A(VIN=5.0V, VOUT=3.3V) 300kHz ー 4µA TSSOP-16

XC9220 PWMTYP. 92% 2.8V～16V ADJ=0.9V ±1.5% 3.0A

300kHz500kHz1MHz

ー 1µA SOT-25USP-6C

XC9221 PWM/PFM

XC9223Synchronous PWM

or PWM/PFM TYP. 95% 2.5V～6.0V ADJ=0.8V ± 2.5% 1.0A 1MHz2MHz

ー 0.5µAMSOP-10USP-10BSOP-8XC9224

XC9235 Synchronous PWM

TYP. 92% 1.8V～6.0V 0.8V～4.0V ± 2% 600mA 1.2MHz3.0MHz 15µA 1µA

USP-6CSOT-25USP-6EL

XC9236 Synchronous PWM/PFM

XC9237 Synchronous PWM or PWM/PFM

Step-Up & Down DC/DC Controllers


OUTPUT VOLTAGE ACCURACY OSCILLATION FREQUENCY OUTPUT CURRENT PACKAGE

XC9303 Synchronous PWM/PFM TYP. 84% 2.0V～10V ADJ=0.9V ±2% 300kHz 800mA (VIN=2.7V, VOUT=3.3V) MSOP-8A

Multi Channel DC/DC Converters/Controllers


OUTPUT VOLTAGE ACCURACY OSCILLATION FREQUENCY OUTPUT CURRENT PACKAGE

XC9501 Dual Step-up TYP. 83% 0.9V～10V 1.5V～30V ±2%180kHz (±15%)100kHz, 300kHz500kHz (custom)

Switching Mode Pin：PWM or PFM/PWM Low ESR Ceramic Caps 3.0µA in Standby

MSOP-10USP-10

XC9502 Step-up＋Step-down TYP. 83%TYP. 92% 2.0V～10V 1.5V～30V

0.9V～6.0V ±2%180kHz (±15%)300kHz500kHz (custom)


MSOP-10USP-10

XC9503 Dual Step-down TYP. 92% 2.0V～10V 0.9V～6.0V ±2%300kHz (±15%)180kHz500kHz (custom)


MSOP-10USP-10

XC9504 Step-up＋Inverting TYP. 83%TYP. 76% 2.0V～10V 1.5V～30V

－30V～0.0V ±2%180kHz (±15%)300kHz500kHz (custom)


MSOP-10USP-10

XC9505 Step-down＋Inverting TYP. 92%TYP. 76% 2.0V～10V 0.9V～6.0V

－30V～0.0V ±2%180kHz (±15%)300kHz500kHz (custom)


MSOP-10USP-10

XC9509 Step-down＋Step-down TYP. 90% 2.4V～6.0V

DC/DC：0.9V～4.0VVR：0.9V～4.0V

±2%300kHz600kHz1.2MHz

DC/DC：600mA (MSOP-10)DC/DC：400mA (USP-10)VR ：300mA

MSOP-10USP-10

XC9515 Synchronous Dual Channel TYP. 95% 2.5V～5.5V 1.2V～4.0V ±2% 1MHz 800mA/ Channel Voltage Detector Built-In QFN-20

XC9516 NEW Step up DC/DC ＋Charge pump

ー 2.5V～5.5V DC/DC=～19V ±1.5% 300kHz～1.2MHz ー QFN-20

XC9519 NEW Step-up＋Inverting 85%80% 2.5V～5.5V 2.7V～15V

－2.0V～－15V±1.0% 1.2MHz ー QFN-24

Charge Pumps

SERIES TYPE EFFICIENCY OPERATING VOLTAGE

OUTPUT VOLTAGE

SUPPLY CURRENT

OSCILLATION FREQUENCY NOTE PACKAGE

XC6351A120MR Inverting TYP. 90% 1.2V～5.0V －1.2V～－5.0V 310µA TYP. 120kHz Standby current 2.0µA SOT-26USP-6B

XC9801XC9802 Doubler/Regulated Step-up TYP. 80% 1.8V～5.5V 2.5V～6.0V 80µA 300kHz Standby current 2.0µA USP-8

MSOP-8A

Battery Charge IC


CHARGE CURRENT ACCURACY

TRICKLE CHARGE VOLTAGE

CHARGE TERMINATION

VOLTAGE

SUPPLY CURRENT NOTE PACKAGE

XC6801 Lithium Ion Battery Charger 4.25V～6.0V 500mA ±3% 2.9V 4.2V±0.7%(0.0294V) 12µA Ideal for charging from USB

USP-6CSOT-25

SOT-89-5

XC6802 Lithium Ion Battery Charger 4.25V～6.0V 800mA ±3% 2.9V 4.2V±0.7%(0.0294V) 15µA Charge Current Externally Set

USP-6CSOT-25

SOT-89-5

Selection Guide


Multi Chip Module

SERIES CONTROL EFFICIENCY OPERATING VOLTAGE OUTPUT VOLTAGE ACCURACY OSCILLATION FREQUENCY OUTPUT CURRENT PACKAGE

XCM517 PWMPWM/PFM TYP. 92% 2.7V～6.0V 0.8V～4.0V ±2% 1.2MHz, 3.0MHz 600mA USP-12B01

XCM519 Step-down DC/DC ＋ VR Multi Chip Module TYP. 92% 2.7V～6.0V DC/DC：0.8V～4.0V

VR ：0.7V～1.8V±2% 1.2MHz

3MHzDC/DC：600mAVR ：400mA USP-12B01

XCM520 Step-down DC/DC ＋Dual LDO Regulator TYP. 86% DC/DC：2.7V～6.0V

VR ：1.5V～6.0V

DC/DC：2.3VVR ：1.8VVD ：1.2V

±2% 3MHz DC/DC：600mAVR ：150mA USP-12B01

XCM524 Step-down DC/DC＋VR＋VD TYP. 92% DC/DC：2.7V～6.0VVR＋VD：2.0V～6.0V

DC/DC：0.8V～4.0VVR ：0.9V～5.1VVD ：2.0V～5.5V

±2% 1.2MHz3MHz

DC/DC：600mAVR ：500mA USP-12B01

XCM526 NEW Step-down DC/DC 92% 4.0V～16V 1.2V～ー 500kHz1.0MHz

ー USP-12B01

Temperature Sensors

SERIES TYPEANALOG OUTPUT TEMPERATURE

RANGE

OPERATING VOLTAGE

ANALOG OUTPUT VOLTAGE ACCURACY

SUPPLY CURRENT TEMPERATURE COEFFICIENTS PACKAGE

Typical Standby

XC3101 NEW Temp Sensor －40～＋100 2.7V～5.5V 1.6V@25 ±2.5% 3µA n/a －11.7mV/ USPN-4SSOT-24

Hall IC (Magnetic Sensor)

SERIES TYPE OPERATING VOLTAGE OPERATING POINT RELEASE POINT HYSTERESIS WIDTHAVERAGE SUPPLY

CURRENTPACKAGE

XC3202B CMOS Process 2.4V～5.5V South Pole： 3mT (TYP.)North Pole：－3mT (TYP.)

South Pole： 2mT (TYP.)North Pole：－2mT (TYP.)

South Pole：1mT (TYP.)North Pole：1mT (TYP.) 8µA SOT-23D

QFN-0601

Accelerometer

SERIES TYPE OPERATING VOLTAGE SUPPLY CURRENT RESOLUTION INTERFACE FULL SCALE PACKAGE

XC3330 NEW Free Fall Alarm 2.2V～3.6V 0.27mA (Active)5µA (Standby) 12bit I2C

±2g±4g LCC-10

Power MOSFET/(Single N-Channel)

SERIES

ABSOLUTE MAX RATING ELECTRICAL CHARACTERISTICDRIVING VOLTAGE

(V)PACKAGE

Vdss (V) Vgss (V) Id (A)

Rds (ON) (Ω)Vgs (off) (V)

Ciss (pF) Vgs=1.5V Vgs=2.5V Vgs=4.5V Vgs=10V

TYP. MAX. TYP. MAX. TYP. MAX. TYP. MAX. MIN. MAX.

XP151A11B0MR-G 30 ±20 1 ーーーー 0.13 0.17 0.09 0.12 1.0 3.0 150 4.5 SOT-23

XP151A12A2MR-G 20 ±12 1 ーー 0.12 0.16 0.075 0.10 ーー 0.7 1.4 180 2.5 SOT-23

XP151A13A0MR-G 20 ±8 1 0.17 0.25 0.10 0.14 0.075 0.10 ーー 0.5 1.2 220 1.5 SOT-23

XP161A11A1PR 30 ±20 4 ーーーー 0.075 0.105 0.05 0.065 1.0 2.5 270 4.5 SOT-89

XP161A1265PR 20 ±12 4 ーー 0.07 0.095 0.042 0.055 ーー 0.7 1.4 320 2.5 SOT-89

XP161A1355PR 20 ±8 4 0.10 0.15 0.05 0.07 0.037 0.05 ーー 0.5 1.2 390 1.5 SOT-89

Power MOSFET/(Single P-Channel)

SERIES

ABSOLUTE MAX RATING ELECTRICAL CHARACTERISTICDRIVING VOLTAGE

(V)PACKAGE

Vdss (V) Vgss (V) Id (A)

Rds (ON) (Ω)Vgs (off) (V) Ciss

(pF)Vgs=－2.5V Vgs=－4.5V Vgs=－5.0V Vgs=－10V

TYP. MAX. TYP. MAX. TYP. MAX. TYP. MAX. MIN. MAX.

XP152A11E5MR-G －30 ±20 －0.7 ーー 0.35 0.45 ーー 0.2 0.25 －1.0 －3.0 160 －4.5 SOT-23

XP152A12C0MR-G －20 ±12 －0.7 0.37 0.5 0.23 0.3 ーーーー－0.5 －1.2 180 －2.5 SOT-23

XP162A11C0PR －30 ±20 －2.5 ーー 0.2 0.28 ーー 0.11 0.15 －1.0 －2.5 280 －4.5 SOT-89

XP162A12A6PR －20 ±12 －2.5 0.22 0.3 0.13 0.17 ーーーー－0.5 －1.2 310 －2.5 SOT-89



OpAmps

SERIES TYPE GAIN BANDWIDTH SLEW RATE SUPPLY CURRENT OPERATING VOLTAGE PACKAGE

XC221A1100MRRail to Rail CMOS Op Amp

210kHz 0.07V/µS 15µA TYP.1.2V～10V (single cell)

±0.6V～5V (＋ve/－ve supply) SOT-25XC221A1200MR 550kHz 0.5V/µS 100µA TYP.

Low Noise Amplier (LNA)

SERIES TYPE NOISE FIGURE GAIN S21 POWER CONSUMPTION OPERATING VOLTAGE NOTE PACKAGE

XC2404A816UR-G 1.6GHz2-stage CMOS 0.94dB (TYP.) @1.575GHz 26.5dB 12.0mW (TYP.) @VDD=1.2V

(Fixed Bias) 1.14V～3.0V (Fixed Bias) 1.6GHz Low Noise Amplifier USP-8A01

XC2401A8167R-G NEW 1.6GHz1-stage CMOS 0.69dB (TYP.) @1.575GHz 15dB 6.6mW (TYP.) @VDD=1.2V

(Fixed Bias) 1.14V～1.26V (Fixed Bias) ー USPN-4B02

Oscillation IC & PLL Clock Generators ICs

SERIES TYPE OSCILLATION FREQUENCY

OPERATING VOLTAGE DIVIDER RATIO MULTIPLIER OUTPUT NOTE PACKAGE

XC2163 Divider/Buffer 20MHz～125MHz 3.3V/5.0V f0/1, f0/2f0/4, f0/8 n/a 3 state 3rd Overtone SOT-26

XC2164 Divider/Buffer 4MHz～125MHz 3.3V/5.0V f0/1, f0/2f0/4, f0/8 n/a 3 state Fundamental

3rd Overtone SOT-26

XC2165 Divider/Buffer 8MHz～120MHz 1.5V～3.6V f0/1, f0/2f0/4, f0/8 n/a 3 state Fundamental SOT-26

XC2173 PLL 10MHz～25MHz 3.3V/5.0V f0/2, f0/4, f0/8 f0 x 5, 6, 7, 8 3 state 50～160MHzOutput SOT-26

XC2301 Tri-State Buffer 160MHz (MAX.) 3.3V f0/1, f0/2f0/4, f0/8 n/a 3 state ー SOT-26

XC25BS7 PLL 32kHz～36MHz 2.5V～5.5V 1～256 1～256 n/a 1MHz～100MHzOutput

SOT-25USP-6C

XC25BS8 PLL 8kHz～36MHz 2.5V～5.5V 1～4095 1～2047 n/a 1MHz～100MHzOutput

SOT-26WUSP-6C

Schottky Barrier Diodes

SERIES IF VR VF IR Ct@ f=1MHz (pF) PACKAGE

XBS013S15R-G 0.1A 30V 0.71V@100mA 2µA@VR=25V 6 (VR=0V) SOD-523



XBS053V13R-G 0.5A 30V 0.40V@500mA 100µA@VR=20V 12 (VR=10V) SOD-323A

XBS053V15R-G 0.5A 30V 0.40V@500mA 100µA@VR=20V 12 (VR=10V) SOD-523

XBS104S13R-G 1A 40V 0.49V@1A 200µA@VR=40V 35 (VR=10V) SOD-323A

XBS104S14R-G 1A 40V 0.49V@1A 200µA@VR=40V 35 (VR=10V) SOD-123A

XBS104V14R-G 1A 40V 0.365V@1A 250µA@VR=40V 150 (VR=1V) SOD-123A

XBS203V17R-G 2A 30V 0.35V@2A 350µA@VR=30V 280 (VR=1V) SMA

XBS204S17R-G 2A 40V 0.485V@2A 6µA@VR=40V 180 (VR=1V) SMA


XBS303V17R-G 3A 30V 0.355V@3A 350µA@VR=30V 385 (VR=1V) SMA



XBS013V1DR-G 0.1A 30V 0.37V@10mA 7µA@VR=10V ー USP-2B01

XBS013R1DR-G 0.1A 30V 0.46V@10mA 0.3µA@VR=10V ー USP-2B01

XBS013S1CR-G 0.1A 30V 0.71V@100mA 2µA@VR=25V ー USP-2B02

TVS

SERIES BREAKDOWN VOLTAGE LEAKAGE CURRENT INTER-TERMINAL CAPACITY ESD DURABILITY NUMBER OF ELEMENTS PACKAGE

XBP06V4E4GR-G NEW 6.4V MIN. 1.0µA MAX. 40pF 8kV 4 USP-4

XBP06V4E2HR-G NEW 6.4V MIN. 1.0µA MAX. 40pF 8kV 2 USP-3

XBP06V1E4MR-G NEW 6.1V MIN. 2.5µA MAX. 170pF 9kV 4 SOT-25

Actual Size

PACKAGE INFORMATION

h=Hight（mm）p=Pin Pitch（mm）

Package Code

Actual Size Photo

Magnified View(Unit:mm)

SOT-23

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=1.9

USP-2B01

Magnified

0.3±0.05

0.6±0.05

h=0.33 MAX.p=0.31

USPN-4

Magnified

1.2±0.05

0.9±0.05

h=0.4 MAX.p=0.55

CL-2025

Magnified

2.0±0.1

2.5±0.1

h=1.04 MAX.p=0.55

USPN-6

Magnified

1.3±0.05

1.3±0.05

h=0.4 MAX.p=0.45

USP-12B01

Magnified

2.3±0.05

2.8±0.05

h=0.6 MAX.p=0.4

QFN-20

Magnified

4.0±0.1

4.0±0.1

h=0.8 MAX.p=0.5

QFN-0601

Magnified

2.0

h=0.63 MAX.p=0.65

USPQ-4B03

Magnified

1.0±0.05

1.0±0.05

h=0.4 MAX.p=0.65

h=1.0 MAX.p=0.6

h=0.8 MAX.p=0.5

QFN-24

Magnified

4.0±0.1

4.0±0.1

LCC-10

Magnified

2.9±0.2

2.9±0.2

USP-8A01

Magnified

1.5±0.05

1.5±0.05

h=0.6 MAX.p=0.5

SOT-25

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=0.95

SOT-26

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=0.95

SOT-26W

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=0.95

USP-4

Magnified

1.6±0.05

1.2±0.05

h=0.6 MAX.p=0.6

USP-4D

Magnified

1.6±0.08

1.2±0.08

h=0.6 MAX.p=0.6

USPN-4B02

Magnified

0.95±0.05

0.75±0.05

USP-3

Magnified

1.2±0.08

1.2±0.08

h=0.6 MAX.p=0.6

SSOT-25

Magnified

2.0±0.2

2.1±0.3

h=1.1 MAX.p=0.65

Actual Size Actual Size Actual Size Actual Size Actual Size

Actual Size Actual Size Actual Size Actual Size Actual Size Actual Size






SSOT-24

Magnified

2.0±0.1

2.1±0.3

h=1.1 MAX.p=1.3

USP-6B

Magnified

2.0±0.05

1.8±0.05

h=0.7 MAX.p=0.5

h=0.4 MAX.p=0.4

USP-6C

Magnified

2.0±0.05

1.8±0.05

h=0.6 MAX.p=0.5

USP-8

Magnified

2.5±0.05

2.7±0.05

h=0.6 MAX.p=0.65

USP-10

Magnified

2.5±0.05

2.7±0.05

h=0.6 MAX.p=0.5

MSOP-10

Magnified

4.9±0.2

3.0±0.1

h=1.16 MAX.p=0.5

MSOP-8B

Magnified

4.0±0.3

2.95±0.2

h=1.2 MAX.p=0.65

MSOP-8A

Magnified

4.9±0.1

3.0±0.1

h=1.22 MAX.p=0.65

USP-10B

Magnified

2.6±0.05

2.9±0.05

h=0.6 MAX.p=0.65/0.5

TSSOP-16

Magnified

6.4±0.2

5.1±0.2

h=1.4 MAX.p=0.65

SOT-89

Magnified

4.5±0.1

4.0±0.25

h=1.6 MAX.p=1.5

SOT-89-5

Magnified

4.5±0.1

4.35 MAX

h=1.6 MAX.p=1.5

SOT-223

Magnified

6.6±0.3

7.0±0.3

h=1.8 MAX.p=2.3

SOD-323

Magnified

1.25±0.15

2.5±0.15

h=1.15 MAX.

SOD-523

Magnified

0.8±0.05

1.6±0.1

h=0.77 MAX.

SOD-723

Magnified

0.6±0.05

1.4±0.1

h=0.65 MAX.

SOD-323A

Magnified

1.3±0.1

2.6±0.1

h=1.0 MAX.

SOD-123

Magnified

1.6±0.2

3.8±0.2

h=1.3 MAX.

SOD-123A

Magnified

1.6±0.1

3.7±0.15

h=1.25 MAX.

h=2.20 MAX.

SMA

Magnified

2.79 MAX

5.0±0.2

TO-252

Magnified

6.55±0.2

9.9±0.55

h=2.4 MAX.p=2.28

+0.075－0.05

2.0+0.075

－0.05

Torex provides products in the following packages.

Actual Size

PACKAGE INFORMATION

h=Hight（mm）p=Pin Pitch（mm）

Package Code

Actual Size Photo

Magnified View(Unit:mm)

SOT-23

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=1.9

USP-2B01

Magnified

0.3±0.05

0.6±0.05

h=0.33 MAX.p=0.31

USPN-4

Magnified

1.2±0.05

0.9±0.05

h=0.4 MAX.p=0.55

CL-2025

Magnified

2.0±0.1

2.5±0.1

h=1.04 MAX.p=0.55

USPN-6

Magnified

1.3±0.05

1.3±0.05

h=0.4 MAX.p=0.45

USP-12B01

Magnified

2.3±0.052.8±0.05

h=0.6 MAX.p=0.4

QFN-20

Magnified

4.0±0.1

4.0±0.1

h=0.8 MAX.p=0.5

QFN-0601

Magnified

2.0

h=0.63 MAX.p=0.65

USPQ-4B03

Magnified

1.0±0.05

1.0±0.05

h=0.4 MAX.p=0.65

h=1.0 MAX.p=0.6

h=0.8 MAX.p=0.5

QFN-24

Magnified

4.0±0.1

4.0±0.1

LCC-10

Magnified

2.9±0.2

2.9±0.2

USP-8A01

Magnified

1.5±0.05

1.5±0.05

h=0.6 MAX.p=0.5

SOT-25

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=0.95

SOT-26

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=0.95

SOT-26W

Magnified

2.9±0.2

2.8±0.2

h=1.3 MAX.p=0.95

USP-4

Magnified

1.6±0.05

1.2±0.05

h=0.6 MAX.p=0.6

USP-4D

Magnified

1.6±0.08

1.2±0.08

h=0.6 MAX.p=0.6

USPN-4B02

Magnified

0.95±0.05

0.75±0.05

USP-3

Magnified

1.2±0.08

1.2±0.08

h=0.6 MAX.p=0.6

SSOT-25

Magnified

2.0±0.2

2.1±0.3

h=1.1 MAX.p=0.65








SSOT-24

Magnified

2.0±0.1

2.1±0.3

h=1.1 MAX.p=1.3

USP-6B

Magnified

2.0±0.05

1.8±0.05

h=0.7 MAX.p=0.5

h=0.4 MAX.p=0.4

USP-6C

Magnified

2.0±0.05

1.8±0.05

h=0.6 MAX.p=0.5

USP-8

Magnified

2.5±0.05

2.7±0.05

h=0.6 MAX.p=0.65

USP-10

Magnified

2.5±0.05

2.7±0.05

h=0.6 MAX.p=0.5

MSOP-10

Magnified

4.9±0.2

3.0±0.1

h=1.16 MAX.p=0.5

MSOP-8B

Magnified

4.0±0.3

2.95±0.2

h=1.2 MAX.p=0.65

MSOP-8A

Magnified

4.9±0.1

3.0±0.1

h=1.22 MAX.p=0.65

USP-10B

Magnified

2.6±0.05

2.9±0.05

h=0.6 MAX.p=0.65/0.5

TSSOP-16

Magnified

6.4±0.2

5.1±0.2

h=1.4 MAX.p=0.65

SOT-89

Magnified

4.5±0.1

4.0±0.25

h=1.6 MAX.p=1.5

SOT-89-5

Magnified

4.5±0.1

4.35 MAX

h=1.6 MAX.p=1.5

SOT-223

Magnified

6.6±0.3

7.0±0.3

h=1.8 MAX.p=2.3

SOD-323

Magnified

1.25±0.15

2.5±0.15

h=1.15 MAX.

SOD-523

Magnified

0.8±0.05

1.6±0.1

h=0.77 MAX.

SOD-723

Magnified

0.6±0.05

1.4±0.1

h=0.65 MAX.

SOD-323A

Magnified

1.3±0.1

2.6±0.1

h=1.0 MAX.

SOD-123

Magnified

1.6±0.2

3.8±0.2

h=1.3 MAX.

SOD-123A

Magnified

1.6±0.1

3.7±0.15

h=1.25 MAX.

h=2.20 MAX.

SMA

Magnified

2.79 MAX

5.0±0.2

TO-252

Magnified

6.55±0.2

9.9±0.55

h=2.4 MAX.p=2.28

+0.075－0.05

2.0+0.075

－0.05

Torex provides products in the following packages.

http://www.torex.co.jp/english/

2010.12 ①

Head Offi ce8F Sakuranihonbashi Bldg., 1-13-12 Nihonbashikayabacho Chuo-ku, Tokyo 103-0025 Japan

Tel . +81-3-5652-8700

TOREX SEMICONDUCTOR (S) PTE LTD60 Kaki Bukit Place Eunos Techpark #05-17/18 Singapore 415979

Tel : +65-6745-1352

TOREX USA Corp.15255 Alton Parkway, Suite 100, Irvine, CA 92618 USA

Tel : +1-949-261-2022

TOREX SEMICONDUCTOR EUROPE LIMITEDUnit 1, The Courtyard Whitwick Business Park Stenson Road Coalville Leicestershire LE67 4JP UK

Tel : +44-1530-510190

TOREX SEMICONDUCTOR TAIWAN LTD.11F-1, No21, Sec.6, Zhong Xiao E. Rd., Taipei City 11575, Taiwan

Tel : +886-2-2789-2089

TOREX SEMICONDUCTOR DEVICE (Shanghai) CO., LTD.11F Room F01-02, Junyao International Plaza, No.789 Zhao Jia Bang Rd., Shanghai, China

Tel : +8621-5115-5870

TOREX (HONG KONG) LIMITEDUnit 505, Energy Plaza, 92 Granville Road, TST East, Kowloon, HK

Tel : +852-2312-7489

TOREX SEMICONDUCTOR LTD.

mik

Adresskleber

Documents

TOREX_New Product Catalog 2011