TOOLS and EQUIPMENTdieseltest.com/wp-content/uploads/2018/04/SRN-Brochure-UK_03-aprile18.pdf · valve for injectors common rail piezo bosch srn.101.400 pin for injectors common rail

04/18 | UK | VERSION 03

| 1

COMMON RAIL INJECTORS

M I L A N O

VERSION 03 | UK | 04/18

100% satisfied!Guaranteed

SirinibyFerruccio

TOOLS and EQUIPMENT

VERSION 03 | UK | 04/18

2 |


DENSO injectors filter replacement


REPLACEMENT KIT OF DUST PROTECTIVE FILTER «A BARRE» ON COMMON RAIL DENSO INJECTORS

SRN.101.615

REPLACEMENT KIT OF PROTECTOR FILTER ON COMMON RAIL DENSO INJECTORS

SRN.101.614

REPLACEMENT COMPLETE KIT OF DUST PROTECTIVE FILTERS ON COMMON RAIL DENSO INJECTORS

SRN.101.616

04/18 | UK | VERSION 03

| 3




DENSO INJECTORS REPLACEMENT FILTERS

SRN.101.614/1

095000-5600 095000-5650 095000-5801 095000-5810

095000-5921 095000-5931 095000-6132 095000-6240

095000-625# 095000-6353 095000-6364 095000-6583

095000-6593 095000-6700 095000-6791 095000-698#

095000-6993 050000-7500 095000-7530 095000-7731

095000-7761 095000-7781 095000-8011 095000-8100

23670-0R010 23670-0R070 295050-1170 R2AA13H50

095000-0562 095000-0570 095000-0750 095000-0941

095000-1211 095000-5086 095000-5212 095000-5226

095000-5344 095000-5450 095000-5471 095000-5474

095000-5511 095000-5550 095000-6632 095000-7172

095000-758# 614007l0127

L = 30 mm

L = 27 mm

SRN.101.615/1

SRN.101.615/2REPLACEMENT FILTERS

«A BARRA»

VERSION 03 | UK | 04/18

4 |


DIGITAL INSULATION AND CONTINUITY TESTERS TO BE USED ON CR PIEZO INJECTORS

To save the common rail simulators, is mandatory before checking the PIEZO injectors

SRN.101.501

DIGITAL, HANDY AND ECONOMIC COMPONENTS TESTER TO BE USED ON CR INJECTORS

Digital PDA instrument for the inductance measurement (L), Capacity (C), passive components Resistance (R and DCR)

SRN.101.500

Electronical equipment


04/18 | UK | VERSION 03

| 5




SOFTWARE MANAGEMENT DIAGNOSIS KIT

ALLOWS TO CONTROL NOT ONLY THE COMMON RAIL PUMP IN CONDITIONS OF RAIL CLOSED

(SIMILAR: Delphi YDT278), BUT ALSO VERIFY THE PRESSURES WITH THE MARCIANTE VEHICLE IN

CONDITION OF RAIL OPEN (SIMILAR: Delphi YDT850).

MICROSCOPE DIGITAL ZOOM 1000X. COMPATIBLE USB

UNIVERSAL TESTER FOR THE CONTROL OF COMMON RAIL DIESEL INJECTORS AND GASOLINE INJECTORS

BOSCH-DENSO-DELPHI-SIEMENS (VDO) DIESEL AND GASOLINE !!!THIS SIMULATOR ALLOWS TO

PROGRAMME MANUALLY VERY SIMPLE AND INTUITIVE THE CORRECT ELECTRIC IMPULSE THAT

AFTER SENT TO THE INJECTORS.THE TESTER IS INTELLIGENT BECAUSE BEYOND

THE FREE OPERATOR OF PROGRAMMING THE PARAMETERS AND AUTOMATICALLY RECOGNIZES

THE TYPE OF INJECTOR. PROGRAMMING IS STARTED BY A SINGLE KNOB THAT CONTROLS THE SOFTWARE

SRN.101.528

SRN.101.541

SRN.101.540

VERSION 03 | UK | 04/18

6 |


Stage 3 High pressure «flexible» hose

KIT STAGE 3 FOR CONTROL AND CALIBRATION OF COMMON RAIL INJECTORS: BOSCH, DENSO AND DELPHI

SRN.101.532

Kit FASE 3 repair- and testing complex is dedicated to assembling and disassembling Bosch, Denso and Delphi Common Rail injectors according to manufacturer specified steps and mechanical tolerances. The complex offers the ability to measure relevant mechanical tolerances of the injector parts and electrical characteristics of the electromagnet. The assembly/disassembly steps and critical measurement points are presented by convenient step-by-step instructions descriptions and relevant images of the work process itself.

04/18 | UK | VERSION 03

| 7


Stage 3 High pressure «flexible» hose

High pressure «rigid» hosefor VP PUMPS application

*Note: we can make tailor

made hoses, with specific cutsomer

request

SRN.101.504 6x2x300mm 14x14

SRN.101.503 6x2x300mm 14x12

SRN.101.502 6x2x300mm 12x12

SRN.101.507 6x2x400mm 14x14 similar: 1.680.750.000


SRN.101.505 6x2x400mm 12x12


SRN.101.515 6x2x450mm 14x14






SRN.101.521 6x2x700mm 12x14

SRN.101.522 6x2x700mm 14x14

SRN.101.523 6x2x700mm 12x12



SRN.101.524 6x2,2x350mm 12x14 similar: 1.680.750.085



VERSION 03 | UK | 04/18

8 |


HEXAGONAL OPEN WRENCH 15mm SIZE, WITH 3/8’’ SQUARE CONNECTION

SRN.101.105


SRN.101.106


SRN.101.107


SRN.101.109

HEXAGONAL OPEN WRENCH 25mm SIZE FOR SIEMENS, WITH 1/2’’ SQUARE CONNECTION

SRN.101.108



SRN.101.110

SRN.101.111

Wrench Wrench

04/18 | UK | VERSION 03

| 9



SRN.101.112

SET OF 6 HEXAGONAL OPEN WRENCHES, SIZE: 15-17-19-29-30-32mm, WITH 3/8’’ AND 1/2’’ SQUARE CONNECTIONS

SRN.101.103

WRENCHE to unlock/lock the HEXAGONALE ring-nut into the Bosch CRI injectors

Note: with 1/2’’ square connection

SRN.101.101

WRENCHE to unlock/lock the TORX ring-nut size T10 into the Bosch CRIN injectors


SRN.101.124

WRENCHE to unlock/lock the TORX ring-nut size T12 into the Bosch CRIN injectors


SRN.101.125

Wrench Wrench

VERSION 03 | UK | 04/18

10 |


WRENCH to dismount the element on pumps DENSO HP3-HP4

(RIBE 09 WITH SQUARE 1/2”)

WRENCHE to unlock/lock the CRIN Bosch injectors coil nut, SIZE: 27mm - 12 point

Note: 1/2’’ SQUARE CONNECTIONS

SRN.101.123

SRN.101.126



SRN.101.127

WRENCHE to unlock/lock the CRI Bosch injectors coil nut, SIZE: 29mm - hexagonal


SRN.101.133



SRN.101.134

Wrench Wrench

04/18 | UK | VERSION 03

| 11


Wrench Wrench

WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Hexagonal 14mm

Note: external hexgonal size 27mm

SRN.101.114



SRN.101.115

WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 16mm

Note: external octagonal size 27mm

SRN.101.116



SRN.101.117

VERSION 03 | UK | 04/18

12 |


WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 17,5mm


SRN.101.118


Note: external octagonal size 27mm

SRN.101.119



SRN.101.120



SRN.101.121

Wrench Wrench

04/18 | UK | VERSION 03

| 13


Wrench Wrench

SET OF WRENCHES to unlock/lock the CR injectors nozzle nut, SIZE: 14, 15, 17, 19mm


SRN.101.135

WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE 18B

Note: CR SCANIA 1881565

SRN.101.129

WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE 18B

Note: CR SCANIA 1881565

SRN.101.130

WRENCHE to unlock/lock the CR injector nozzle nut, SIZE 16Z. (POINTS)

Note: for SCANIA 1881565

SRN.101.131

VERSION 03 | UK | 04/18

14 |

EUI - COMMON RAIL - POMPE

Wrench

WRENCHE to unlock/lock easy the TUBE (HOSE NUT) on BOSCH CR PIEZO Injectors

Note: The size is 19-27mm

SRN.101.132

WRENCHE to unlock/lock the cross ring-nut into the CR Siemens injectors

Note: with driver

SRN.101.128

WRENCHE to unlock/lock the three pin ring-nut into the Denso CR Injectors


SRN.101.102

PIN FOR WRENCH FOR INJECTOR DENSO

Note: for wrench SRN.101.102

SRN.101.102/1

Wrench

04/18 | UK | VERSION 03

| 15


Wrench Wrench



SRN.101.133



SRN.101.134

SET OF TOOLS FOR ASSEMBLE E DISASSEMBLE INJECTOR CR SCANIA 1881565

SRN.101.136

SPECIAL TORX PLUS WRENCH FOR DISMOUNTING OF COMMON RAIL CP3

SRN.101.137

VERSION 03 | UK | 04/18

16 |

Wrench Wrench

WRENCH TO DISMOUNT THE INTERNAL RING-NUT OF THE COMMON RAIL INJECTORS CAT, DENSO, PERKINS

SRN.101.138

WRENCH TO DISMOUNT THE INTERNAIL RING-NUT OF THE SOLENOID OF INJECTORS CR DENSO

Note: WITH 1/2’’ SQUARE CONNECTION

SRN.101.139

RATCHET WITH CONNECTION 1/2”, 9X12MM FOR DYNANOMETRIC WRENCH

SRN.101.140

DYNAMOMETRIC WRENCH CONNECTION 27MM, MEASURE ENGAGE CONNECTION 9X12MM


Note: FOR SIEMENS INJECTOR

SRN.101.141

SRN.101.152


04/18 | UK | VERSION 03

| 17

Wrench Wrench


SRN.101.142


SRN.101.143

DIGITAL DYNAMOMETRIC WRENCH 10-100 NM

Note: KIT INCLUDES RATCHET WRENCH WITH ENGAGE CONNECTION 9X12MM AND FLAT WRENCH 27MM WITH

ENGAGE CONNECTION 9X12MM

SRN.101.144

WRENCH 12 FACES TO DISMOUNT THE SOLENOID OF COMMON RAIL INJECTORS CAT, DENSO, PERKINS

Note: 27,5MM

SRN.101.145

DYNANOMETRIC WRENCH FOR CONTROLLED BLOCKING FROM 20 TO 100 Nm

Note: Measure engage connection 14X18

SRN.101.146

WRENCHE TO UNLOCK/LOCK THE DENSO INJECTORS COIL NUT, SIZE: 27MM - 6 POINT

SRN.101.147


VERSION 03 | UK | 04/18

18 |

Wrench Spare parts

POLIGONAL NOZZLE HOLDER WRENCH 21MM FOR DELPHI INJECTORS ON MONDEO AND FORD TRANSIT

SRN.101.149

WRENCH 30MM 12 SIDES FOR DOSMOUNT SOLENOID OF COMMO0N RAIL INJECTORS CRIN WITH CONNECTION 14X18

Note: SIMILAR 0.986.610.384 FOR INJECTORS 0.445.120.027 - 0.445.120.042 - 0.445.120.082

INJECTION LINE SOCKET 1/2” 17MM

Note: FOR MERCEDES PUMP

SRN.101.150

SRN.101.151


04/18 | UK | VERSION 03

| 19

Wrench Spare parts

VALVE FOR INJECTORS COMMON RAIL PIEZO BOSCH

SRN.101.400

PIN FOR INJECTORS COMMON RAIL PIEZO BOSCH

SRN.101.400/1

VALVE PIEZO SIEMENS

SRN.101.401

50 BALLS FOR INJECTORS COMMON RAIL BOSCH. DIAMETER 1,33MM. SIMILAR: F00VC05001

SRN.101.414

50 BALLS FOR INJECTORS COMMON RAIL BOSCH MULTIJET. DIAMETER 1,50MM

SIMILAR: F00VC05009

50 BALLS FOR INJECTORS COMMON RAIL BOSCH SIEMENS. DIAMETER 3MM. SIMILAR: 1.903.230.00

SRN.101.415

SRN.101.416


VERSION 03 | UK | 04/18

20 |

Spare parts

NOZZLE V0605P144 + NUT FOR INJECTORS SIEMENS VDO (A2C59513997, INJ. 5WS40148-Z) Note: for CITROEN C1-C2-C3, FORD FIESTA V - FUSION, MAZDA 2, PEUGEOT 107-307, TOYOTA AYGO

NOZZLE M0005P153 + NUT FOR INJECTORS SIEMENS VDO (A2C59514910, A2C59511602, INJ. 5WS40200) Note: for PEUGEOT 307, CITROEN C4 –C5 – C8

NOZZLE M0604P142 + NUT FOR INJECTORS SIEMENS VDO (A2C59513998, INJ. 5WS40149-Z) Note: for FORD FIESTA - FUSION, PEUGEOT 107-307, TOYOTA AYGO

NOZZLE M1001P152 + NUT FOR INJECTORS SIEMENS VDO (A2C59514911, INJ. 5WS40086) Note: for FORD FOCUS C-MAX – GALAXY – MONDEO III , IV – S-MAX

NOZZLE M0003P153 + NU FOR INJECTORS SIEMENS VDO (A2C59514909, INJ. 5WS40156-Z) Note: for FORD FOCUS C-MAX, PEUGEOT 307, CITROEN C4 –C5

NOZZLE M1003P152 + NUT FOR INJECTORS SIEMENS VDO (A2C59514912, A2C59511611, INJ. 5WS40250) Note: for FOR FORD FOCUS C-MAX – GALAXY – MONDEO III , IV – S-MAX

SRN.101.425

SRN.101.428

SRN.101.426

SRN.101.429

SRN.101.427

SRN.101.430


04/18 | UK | VERSION 03

| 21

Spare parts Spare parts for pump CP4

VALVE TAPPET SIMILAR: 1462C24999 FOR ALL PUMPS BOSCH CP4

SRN.101.404

CAMSHAFT FOR PUMP BOSCH CP4 0445010506, ...517. ...524. SIMILAR: 1466C06025

SRN.101.402

CAMSHAFT FOR PUMP BOSCH CP4 0445010507, ...543. ...546, …508 (VW, SKODA, AUDI). SIMILAR: 1466C06030

SRN.101.403

PRESSURE CONTROL VALVE (ZME) FOR PUMP CP4 506

ZME1462C00991/506

PRESSURE CONTROL VALVE (ZME) FOR PUMP CP4 507

CAMSHAFT FOR PUMP BOSCH CP4 0445010513, ...514. ...526, …529, ...532,...562, ...535.. SIMILAR: 1466C06045

ZME1462C00987/507

SRN.101.405


VERSION 03 | UK | 04/18

22 |

COMMON RAIL PUMP

Spare parts for pump CP4

CAMSHAFT FOR PUMP BOSCH CP4 0445010611, ...646, ...659, …669, ...673,...685, .. SIMILAR: 1466C06034

SRN.101.418

CAMSHAFT FOR PUMP BOSCH CP4 0445010512, ...559. SIMILAR: 1466C06042

SRN.101.423

GASKET KIT WITH OIL SEAL FOR BOSCH CP4 PUMP 0445010506.., 507.., 546.., 580

Note: AUDI, SEAT, SKODA,VW

SRN.101.419

GASKET KIT WITH OIL SEAL FOR BOSCH CP4 PUMP 0445010611..,673

NOTE: AUDI A6/Q5/Q7, VW PHAETON/TOUAREG

SRN.101.420

GASKET KIT WITH OIL SEAL FOR BOSCH CP4 PUMPSimilar: 1462c15999

SRN.101.421

04/18 | UK | VERSION 03

| 23

COMMON RAIL PUMP

Spare parts for pump CP4

Spare parts for pump

BUSHING FOR PUMP COMMON RAIL CP1

Note: 19X17MM H=15MM

SRN.101.431

BUSHING FOR PUMP COMMON RAIL CP1/CP1H


SRN.101.432

BUSHING FOR PUMP COMMON RAIL CP1/CP1H


SRN.101.433

BUSHING FOR PUMP COMMON RAIL CP1H

NOTE: 21X23MM H=17MM

SRN.101.434

BUSHING FOR PUMP COMMON RAIL CP1H


SRN.101.435

VERSION 03 | UK | 04/18

24 |


Spare parts, Connectors

COMMON RAIL PUMP



SRN.101.436



SRN.101.437



SRN.101.438



SRN.101.439

04/18 | UK | VERSION 03

| 25



BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS 1 WAY. (10 PIECES)

SRN.101.407

BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS 2 WAY. (10 PIECES)

SRN.101.408

BACK LEAK CONNECTION FOR COMMON RAIL INJECTORS DELPHI

SRN.101.413

BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS SIEMENS 1 WAY FEMALE (10 PIECES)

Note: FOR INJECTORS A2C59513484, A2C59511606

SRN.101.466

BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS SIEMENS 1 WAY MALE (10 PCS.) (FORD TRANSIT)

Note: FOR INJECTORS 1746967, 1840747, 5WS40745, 9801125480, A2C5330791, A2C59517051, BK2Q-9K546-AG

KIT BACK LEAK ADAPTERS WITH THREAD FOR DENSO COMMON RAIL INJECTORS (6 PCS)

SRN.101.488

SRN.101.422


VERSION 03 | UK | 04/18

26 |



BACK LEAK CONNECTOR (LONG) FOR COMMON RAIL INJECTORS BOSCH PSA 1 WAY. (10PCS)

Note: FORD 1,6 TDI

SRN.101.451

BACK LEAK CONNECTOR LONG FOR COMMON RAIL INJECTORS BOSCH PSA 2 WAY. (10PCS)

Note: FORD 1,6 TDI

SRN.101.452

BACK LEAK CONNECTOR FOR INJECTORS COMMON RAIL BOSCH 2 WAYS. (VW CRAFTER - BMW) (5 PCS)

Note: INJECTORS 0.445.110.550 - 0.445.110.551 - 0.445.110.743

SRN.101.494

BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS DELPHI 1 WAY. (5PCS)

Note: VW

SRN.101.495

BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS DELPHI 2 WAY. (5PCS)

Note: VW

SRN.101.496


04/18 | UK | VERSION 03

| 27



BACK LEAK CONNECTOINS FOR COMMON RAIL SIEMENS 1 WAY (10PZ)

Note: VOLVO/PEUGEOT

SRN.101.481

BACK LEAK CONNECTOINS FOR COMMON RAIL SIEMENS 2 WAY (10PCS)

SRN.101.482

BACK LEAK CONNECTOINS FOR COMMON RAIL PIEZO BOSCH 2 WAY (10PCS)

SRN.101.483

3 WAYS PLASTIC CONNECTION SIEMENS, DIAM. 4MM (10PCS)

SRN.101.604

CONNECTIONS FOR DELPHI INJECTORS

Note: FOR INJECTORS FORD, RENAULT, GRUPPO PSA

CONNECTIONS FOR BOSCH INJECTORS 2 WAYS

SRN.101.535

SRN.101.537


VERSION 03 | UK | 04/18

28 |


Varie, Raccordi, Connettori

CLUMPIMG SADDLE VDO SIEMENS, (10PCS)

Note: SIMILAR 1800-001-001Z, INIETTORI: 5WS40148-Z EURO 3, 5WS40149-Z EURO 4


Note: SIMILAR 1800-001-002Z, INIETTORI: 5WS40156-4Z CLASS 4, 5WS40156-Z CLASS 5

SRN.101.441


Note: SIMILAR 1800-001-003Z, INJECTORS: 5WS40000-Z

SRN.101.442

HOLDER FOR COMMON RAIL INJECTOR BOSCH (10PCS)

GASKET KIT FOR COMMON RAIL INJECTORS

Note: SIMILAR F00VC99002

SRN.101.444 SRN.101.445

COMMON RAIL INJECTORS REPAIR KIT

Note: BOSCH

SRN.101.446

SRN.101.440

CLIP WASTE JOINT INJECTOR COMMON RAIL DENSO

SRN.101.443


04/18 | UK | VERSION 03

| 29


Varie, Raccordi, Connettori

Back Leack connector with valve, for Bosch PIEZO injectors

Note: Valve inside in the connector

SRN.101.623

Back Leack connector, for CODING in Delphi CR injectors

SRN.101.624

CR Injectors back leack connectors and adapters set and test tube measurments set

Note: Universal and complete set

SRN.101.621

CR Injectors back leack test tube measurments set

Note: Without beack leak connectors

SRN.101.622


VERSION 03 | UK | 04/18

30 |

Washer copper Washer copper

KIT FOR BASE WASHER COPPER FOR INJECTORS COMMON RAILNote: 15 SIZE, 1112 PCS

KIT INCLUDED THE NEXT SIZE OF THE SHIM:

SRN.101.424

SHIM SIZE: 13X7,3X1,5MM PIEZO BOSCH CR(REF. F00VP01004)Note: AUDI, VW. (100PCS)

SHIM SIZE: 13X7,3X2,5MM DELPHI(REF. 9001-850F =F00VC17505)Note: AUDI A6, SKODA, SEAT, VW. (50PCS)

SHIM SIZE: 14X7,3X1,6MM DELPHI(REF. 9001-850=850B=850E)Note: FORD MONDEO, FORD FOCUS CITROEN. (100PCS)

SHIM SIZE: 14X7,3X1,8MM DELPHINote: FORD. (100PCS)

SHIM SIZE: 14X7,3X2MM BOSCH CR(REF. 9001-850A=F00VP01008)Note: KIA, PAJERO. (50PCS)

SHIM SIZE: 15X7,5X0,5MM(REF. 2430105048=51987010091)Note: NISSAN. (100PCS)

SHIM SIZE: 15X7X1MM(REF. 51987010090) Note: MAN, NEF, CAT. (100PCS)

SRN.101.424/1

SRN.101.424/2

SRN.101.424/3

SRN.101.424/4

SRN.101.424/5

SRN.101.424/6

SRN.101.424/7


04/18 | UK | VERSION 03

| 31

Washer copper Washer copper

SHIM SIZE: 15X7,3X1,5MM PIEZO BOSCH CR WITH STEP(REF. 580172007=F00RJ01086)Note: IVECO, ISUZU. (50PCS)

SHIM SIZE: 15X7,3X1,5MM CONICAL. (REF. 1987972086)Note: MERCEDES, FIAT, SIEMENS/VDO. (100PCS)

SHIM SIZE: 15,6X8,1X2MM BOSCH CR(REF. 55578387=821017=821776)

Note: OPEL 1,7 TDCI. (50PCS)

SHIM SIZE: 16,5X9X1,5MM Note: CUMMINS, SCANIA. (50PCS)

SHIM SIZE: 13,45X7,5/10X2MM. (REF. RF2A-13-H51A) Note: MAZDA. (12PCS)

SIZE: 15X7,3X2MM. (REF. F00VC17504) Note: IVECO, FIAT, BMW. (50PCS)

SHIM SIZE: 15X7,3X2,5MM SIEMENS, BOSCH. (REF. 2430105042)Note: FORD, PSA. (100PCS)

SHIM SIZE: 15X7,3X3MM. (REF. 9001-850C)Note: RENAULT. (100PCS)

SRN.101.424/8

SRN.101.424/9

SRN.101.424/13

SRN.101.424/14

SRN.101.424/15

SRN.101.424/10

SRN.101.424/11

SRN.101.424/12


VERSION 03 | UK | 04/18

32 |

COMMON RAIL INJECTORS PUMP

Tools Extractors

UNIVERSAL TOOLS FOR MOUNT/DISMOUNT COMMON RAIL INJECTORS

SRN.101.300

SPECIAL VICE WITH FLANGE FOR REPAIR COMMON RAIL PUMP

SRN.101.301

UNIVERSAL TOOLS FOR MOUNT/DISMOUNT INJECTOR-PUMP EUI

Note: FOR BOSCH, DELPHI, CATERPILLAR CRIN; BOSCH, SIEMENS-VDO CRI; BOSCH AND DELPHI PLD CRIN

SRN.103.300

ADAPTOR FOR PRESSURE CONTROL REGULATOR COMMON RAIL BOSCH (DRV MODEL WITH THREAD 24X1,5) ...DRV 0.281.002.507 and similar...

SRN.101.602

DUMMY REGULATOR FOR PRESSURE CP1 BOSCHSIMILAR: DRV 0.281.002.500

SRN.101.619

04/18 | UK | VERSION 03

| 33

Tools Extractors

INTERNAL PULLER FOR BOSCH COMMON RAIL INJECTORS M17X1 WITH CONNECTOIN 14X1,5

SRN.101.201

EXTRACTOR FOR EXTERNAL FOR BOSCH COMMON RAIL INJECTORS M27X1 WITH CONNECTOIN 14X1.5

Note: TO BE ASSEMBLED AT THE PLACE OF THE SOLENOID

SRN.101.202

INTERNAL PULLER FOR VDO SIEMENS COMMON RAIL INJECTORS M25X1 WITH CONNECTOIN 14X1,5

Note: TO BE ASSEMBLED AT THE PLACE OF THE PIEZO SOLENOID

SRN.101.208

INTERNAL PULLER FOR DENSO COMMON RAIL INJECTORS M20X1 WITH CONNECTOIN 14X1,5

Note: 23670-0R010

SRN.101.209


VERSION 03 | UK | 04/18

34 |

Extractors


EXTRACTOR FOR CP4 INJECTION PUMP ON BMW SERIE 1

SRN.101.210

EXTRACTOR DOUBLE CONNECTION FOR EXTRACTION COMMON RAIL BOSCH INJECTORS. (27X1, 17X1)

Note: TO BE USED WITH SRN.101.200 OR SRN.101.200/1

SRN.101.213

EXTRACTOR FOR COMMON RAIL DENSO INJECTORS 25X0.5

Note: TOYOTA, MAZDA

SRN.101.214

EXTRACTOR FOR COMMON RAIL DENSO INJECTORS 25X0.75

SRN.101.215

04/18 | UK | VERSION 03

| 35

Extractors Extractors

PULLER FOR DISMOUNT ZME BOSCH CP4, IMV DELPHI

SRN.101.204

PULLER FOR DISMOUNT ZME BOSCH CP3/CP1H

SRN.101.205

PULLER FOR DISMOUNT ZME CONTINENTAL/VDO

SRN.101.206

PULLERS KIT FOR DISMOUNT ZME CP4/CP3/CP1H/DELPHI-IMV/CONTINENTAL VDO

SRN.101.207


VERSION 03 | UK | 04/18

36 |

WRENCH TO DISMOUNT THE ELEMENT ON PUMPS DENSO HP3-HP4

Note: RIBE 09 WITH SQUARE 1/2”

SRN.101.123

HEXAGONAL WRENCH 28MM FOR DISMOUNT PUMP SENSOR CP1 SIEMENS

SRN.101.122

SET OF WRENCH TORX WITH HOLE, 6 POINTS, 7 PIECES

Note: measures T10 - T15 - T20 - T25 - T27 - T30 - T40

SRN.104.000

SET OF WRENCH, 5 POINTS, 7 PIECES

Note: measures 2 - 2,7 - 3,3 - 4,3 - 4,9 - 5,5 - 6,3

SRN.104.001

WRENCH FOR VALVE 1467C45003 FOR CP4 PUMP

SRN.103.148

Wrench Pullers - Extractors

COMMON RAIL PUMPS

04/18 | UK | VERSION 03

| 37

Wrench Pullers - Extractors

EUI COMMON RAIL INJECTORS

Bosch CR Injectors PULLER. First remove the coil, second remove the hexagonal ring-nut and than fix the puller into

the injector body

Note: Internal puller with thread size 17x1mm

SRN.101.201

Bosch CR Injectors PULLER. Remove the coil and than fix the puller onto the injector body

Note: External puller with thread size 27x1mm

SRN.101.202

Bosch CR Injectors EXTRACTOR for DISMANTING the injectors from the cylinder block head

Note: Injector could be extracted either with hydraulic jack or with slide hammer

SRN.101.203

PULLER BLOW FOR NOZZLE HOLDERS (M22X1,5) , LENGTH 340 MM + BUSHING F14X1.5

Note: THE NAKED ROD HAS THREAD M14X1.5

PULLER BLOW FOR NOZZLE HOLDERS (M22X1,5) , LENGTH 340 MM + 4 BUSHING F14X1.5; F12X1,5; F14x1,25 AND F27X1

Note: SCREWING THE RING UP TO THE BUSHING THE EXTRACTOR FROM THE JOINT BECOMES FIXED.

THE NAKED ROD HAS THREAD M14X1.5

SRN.101.200

SRN.101.200/1

VERSION 03 | UK | 04/18

38 |


Tools

UNIVERSAL ADAPTOR KIT FOR TEST COMMON RAIL INJECTORS (CRIN)

Note: SUITABLE FOR BOSCH TRUCK INJECTORS, DENSO TRUCK INJECTORS, DELPHI SMART INJECTORS

SRN.101.721

REAMERS KIT FOR CLEANING THE SEAT OF INJECTORS IN THE ENGINE

Note: INCLUDING ONE REAMER FOR CLEANING THE FRONT SIDE OF NOZZLE NUT

SRN.101.617

SET TO CONTROL LEAKING OF VALVE/BALL FOR BOSCH CR INJECTORS

SRN.101.618

04/18 | UK | VERSION 03

| 39

BRUSCH SET IN STEEL/COOPER/NYALON TO CLEAN NOZZLEHOLDER SEAT, ENGINE-HEAD AND PLUGS

(38PCS)

SRN.101.635

DIESEL INJECTION SEAT CLEANER SET

SRN.101.636

REAMER TO CLEAN NOZZLE INJECTOR SEAT DIAM. 15,5MM

SRN.101.637

EXTRACTOR KIT FOR INJECTION PUMP

SRN.101.638

COMMON RAIL

Tools

VERSION 03 | UK | 04/18

40 |

Tools


TOOLS TO EXTRACT/INSERT FIBER RING, DIAM. 7,5 FOR COMMON RAIL BOSCH CRIN INJECTORS

Note: COMPLETE KIT OF VALVE / FUNGHETTO INSERTER

SRN.101.627

TOOLS TO EXTRACT/INSERT FIBER RING, DIAM.8 FOR COMMON RAIL BOSCH CRI INJECTORS + SOME CRIN


SRN.101.626

UNIVERSAL TOOLS TO EXTRACT/INSERT FIBER RING FOR COMMON RAIL BOSCH CRIN AND CRI INJECTORS


SRN.101.628

04/18 | UK | VERSION 03

| 41

Tools

ANTIMAGNETIC INOX PLIERS SET FOR INJECTORS CR

Note: WITH INVERSE OPENING + WITH SHAPED ENDS

SRN.101.603

ANTIMAGNETIC INOX PLIERS FOR INJECTORS CR

Note: INVERSE OPENING

SRN.101.603/1


Note: SHAPED ENDS

SRN.101.603/2


Note: STRAIGHT ENDS

SRN.101.603/3


VERSION 03 | UK | 04/18

42 |

BlocksAdapters

BlocksAdapters


ADAPTER FOR TESTING SIEMENS VDO COMMON RAIL INJECTORS

Note: FORD

SRN.101.711

ADAPTER FOR TESTING DENSO COMMON RAIL INJECTORS. DIAM. 24MM

SRN.101.714

ADAPTER FOR TESTING DENSO COMMON RAIL INJECTORS. DIAM. 18,5MM

SRN.101.715

ADAPTER FOR TESTING DEUTZ BOSCH TRUCK INJECTORS. DIAM. 21MM

Note: 0.445.120.066

SRN.101.717

04/18 | UK | VERSION 03

| 43

BlocksAdapters

BlocksAdapters

ADAPTER FOR TESTING CURSOR9 TRUCK INJECTORS. DIAM. 35MM

Note: 0445120092 - 0445120279

SRN.101.718

ADAPTER FOR TESTING BOSCH MTU TRUCK INJECTORS. DIAM. 26MM

SRN.101.719

ADAPTER FOR TESTING SCANIA 4 PIN TRUCK INJECTORS. DIAM. 35MM

SRN.101.720

UNIVERSAL ADAPTOR KIT FOR TEST COMMON RAIL INJECTORS (CRIN)

SUITABLE FOR: BOSCH TRUCK INJECTORS, DENSO TRUCK INJECTORS, DELPHI SMART INJECTORS

SRN.101.721

COMMON RAIL

VERSION 03 | UK | 04/18

44 |

BlocksAdapters

BracketFlange

COMMON RAIL

UNIVERSAL ADAPTER FOR FIXING COMMON RAIL INJECTORS IN VISE

SRN.101.729

UNIVERSAL ADAPTER FOR FIXING DENSO COMMON RAIL INJECTORS IN VISE

SRN.101.730

DEVICE FOR FILLING THE PIEZO BOSCH CR INJECTORS AMPLIFIER

SRN.101.731

04/18 | UK | VERSION 03

| 45

BlocksAdapters

BracketFlange

COMMON RAIL - PUMPS

Test bench flange for Bosch, CP3 MAN CR pump

Note: to be use with SRN.105.000

SRN.105.004

Test bench flange for Bosch, CP3 MAN CR pump


SRN.105.005

Test bench flange for Bosch, VE and CR pumps, Ø50mm, Ø60mm


SRN.105.006

Test bench flange for Bosch, CR Mercedes pump Ø69,5mm


SRN.105.007

VERSION 03 | UK | 04/18

46 |

COMMON RAIL - PUMPS

BracketFlange Couplings

Test bench flange for Bosch, CR21 pumps, Ø107mm


SRN.102.008

Test bench flange for Bosch, CP4 pumps Ø50mm


SRN.105.009

Test bench flange for Bosch, CP4 HS2 (0445010637) pumps, Ø50mm


SRN.105.010

Test bench flange for Denso, HP2-HP3 pump Ø50mm


SRN.105.011

04/18 | UK | VERSION 03

| 47

COMMON RAIL - TRADITIONAL COUPLINGS

BracketFlange Couplings

Test bench Coupling made with 11 ‘’splines’’ for CR MAN pump

Note: coupling similar to 1685702092 but with two teeth made

SRN.105.015

Test bench Coupling grove size 8x18mm for CR Pumps MB and Siemens CR

Note: coupling with two teeth

SRN.105.012

Test bench Coupling grove size 9x20mm for CR Pumps Renault CR


SRN.105.013

Test bench Coupling grove size 10x21,6mm for CR Pumps Siemens Peugeot BOXER 2,2


SRN.105.014

Test bench Coupling cone size 24mm for Bosch CR CP3 Pumps 044502088

Note: coupling with two teeth without puller nut

SRN.105.016

VERSION 03 | UK | 04/18

48 |

TOOLS FOR TEST BENCH

CouplingsFlange TEST BENCH

New joints without teethWE PRODUCE ANY RANGE OF JOINTS FOR APPLICATION IS ON SRN.105.002 (ISO Standard Joint) AND ON SRN.105.003 (NEW TYPE ISO Joint)

FLEXIBLE COUPLING FOR TEST BENCH BOSCH. DIAMETR CENTERED 50MM. DRAGGING BIDIRECTIONAL. SIMILAR: 1.686.401.028

SRN.105.002

FLEXIBLE COUPLING FOR TEST BENCH BOSCH FOR TOOTHLESS CUOPLING. DIAMETR CENTERED 50MM. DRAGGING BIDIRECTIONAL. SIMILAR:1.686.401.024

SRN.105.003

SUPPORT FOR TEST BENCH (BOSCH TYPE 1.688.010.124)

SRN.105.000

04/18 | UK | VERSION 03

| 49

TEST BENCH

CouplingsFlange TEST BENCH

TEST BENCH FOR TESTING E REPAIR HIGH PRESSURE DIESEL PUMP. 7,5KW, 8 SECTIONS

SRN.105.708

TEST BENCH FOR TESTING E REPAIR HIGH PRESSURE DIESEL PUMP. 11KW, 12 SECTIONS

SRN.105.1112

VERSION 03 | UK | 04/18

50 |

BUSHING DIAMETR 17MM

Note: TO BE USING WITH SRN.105.038





SRN.105.038/17

SRN.105.038/19

SRN.105.038/21

TEST BENCH

TEST BENCH Rail

UNIVERSAL GLASS KIT IN PLEXIGLAS TO VISUALIZE THE SPRAY OF COMMON RAIL INJECTORS

Note: for NOZZLE 7MM AND 9MM DIAMETER

UNIVERSAL KIT OF 4 GLASSES IN PLEXIGLAS TO VISUALIZE THE SPRAY OF COMMON RAIL INJECTORS

Note: for NOZZLE 7MM AND 9MM DIAMETER

SRN.105.038

SRN.105.038

04/18 | UK | VERSION 03

| 51

FITTING 14X14 FOR RAIL SRN.101.620

SRN.101.629

NUT WITH BLIND HEAD FOR RAIL SRN.101.620

SRN.101.630

PLUG WITH THREAD M14X1,5 FOR RAIL SRN.101.620

SRN.101.631

DAMPER FOR TEST BENCH WITH QUICK CONNECTION

SRN.105.019

UNIVERSAL QUICK CONNECTION FOR ALL TYPE OF NOZZLEHOLDERS. DIAM. 7MM

UNIVERSAL QUICK CONNECTION FOR ALL TYPE OF NOZZLEHOLDERS. DIAM. 9MM

SRN.101.632

SRN.101.633


TEST BENCH Rail

COMPLETE RAIL FOR ALL TYPE OF TEST BENCH AND SIMULATORS COMMON RAIL

SRN.101.620

VERSION 03 | UK | 04/18

52 |

Tools

TUBE TYGON MM 3,2X6,4. SOLD AT THE METER

SRN.101.529

TUBE TYGON MM 4,8 X 8,0. SOLD AT THE METER

SRN.101.530

TUBE TYGON MM 8,0 X11,2. SOLD AT THE METER

SRN.101.531

RILSAN PIPE FOR TEST BENCH, L=2MT

SRN.101.516

REDUCTION FITTING F14 / M12 FOR TUBE, TEST BENCH AND INJECTORS

REDUCTION FITTING F12 / M14 FOR TUBE, TEST BENCH AND INJECTORS

SRN.105.400

SRN.105.401


04/18 | UK | VERSION 03

| 53

Tools

FITTING F16 / M14 FOR CP4 PUMP

SRN.105.403

LONG FITTING F14 / M12 FOR COMMON RAIL INJECTOR PIEZO BOSCH

SRN.105.402


VERSION 03 | UK | 04/18

54 |

LDA CONTROL WRENCH, HEXAGON 10, 14MMSIMILAR: 0.986.611.628

SRN.102.103

EXTRACTOR FOR DISASSEMBLY AND ASSEMBLY TAPPET P7100 AND P7800.SIMILAR: 0.986.612.120. KDEP1575

SRN.102.201

MOTORING COUPLING FOR GEAR,FEMAIL DIAM. 17MM FOR CAV PUMPS

SRN.102.304

TAPPET LIFTER FOR “P” PUMP 10X1

Note: 0.986.611.613, KDEP1041

SRN.102.600

EHAB CONNECTION FOR H PUMPS

Note: 0.986.612.953

SRN.102.700

DIESEL TRADITIONAL

04/18 | UK | VERSION 03

| 55

DIESEL TRADITIONAL

MITYVAC DIESEL PRESSURE TESTING PUMP +1,5 BAR FOR LDA AND VACUUM TESTING

PUMP – 1000MBAR

SRN.102.602

TOOLS FOR DISMOUNT/MOUNT EP-VE BOSCH PUMPS

Note: 20PCS

SRN.102.601

DECIMAL COMPARATOR STROKE 30MM - 0.1MM

Note: FOR LINE PUMPS

SRN.102.603

VERSION 03 | UK | 04/18

56 |

CAM-BOX EUI/EUP

Wrench Wrench - Various

OCTAGONAL WRENCH 38 MM, TO DISMOUNT THE SOLENOID OF UNIT-INJECTOR

SRN.103.100

WRENCH 12 SIDES FOR DIMONTING/MOUNTING THE SOLENOID FOR INJECTOR-PUMP AUDI AND VW

Note: TO USE ON INJECTOR-PUMP 0.414.720.404

SRN.103.101

HEXAGONAL WRENCH TO DISMOUNT SOLENOID OF UNIT-INJECTOR VW, AUDI

Note: 0.414.720.2XX AND 0.414.720.0XX

SRN.103.102

HEXAGONAL WRENCH 29MM FOR DISMOUNTING/MOUNTING BODY OF NUT FOR UNIT-INJECTORS AUDI / VW

Note: 0414720400, 0414720401, 0414720402, 0414720403, 0414720453, 0414720454

PENTATORX SCREW KEY FOR MERCEDES ACTROS, INS. FROM 1/4 “

SRN.103.103

SRN.103.104

04/18 | UK | VERSION 03

| 57

CAM-BOX EUI/EUP

Wrench Wrench - Various

ADAPTER-HOLDER FOR INDICATOR FOR EUI INJECTORS

Note: INDICATOR IS NOT INCLUDED

SRN.103.601

WRENCH FOR DISMOUNTING/MOUNTING BODY OF NUT FOR UNIT-INJECTORS AUDI / VW

Note: FOR 0414720404

SRN.103.105

WRENCH TO DISMOUNTING/MOUNTING OF NOZZLE NUT OF DELPHI SMART INJECTOR


SRN.103.106

GASKET KIT FOR EUI VOLVO-IVECO-BH-DELPHI

SRN.103.400

VERSION 03 | UK | 04/18

58 |

EUI/EUP

Kit tandem Kit tandem

REPAIR KIT TANDEM AUDI - VW - LINK

Note: F009D00001=F009D02804, 038145209A

SRN.103.401

REPAIR TANDEM AUDI - VW - FORD - SEAT - SKODA

Note: F009D00069, 03G145209C

SRN.103.402

REPAIR TANDEM AUDI - SKODA - VW - SEAT

Note: 038145209E=H=K

SRN.103.403

REPAIR KIT TANDEM AUDI - VW - SEAT

Note: 038145209M=Q, D02008

SRN.103.404

04/18 | UK | VERSION 03

| 59

EUI/EUP

Kit tandem Kit tandem

REPAIR KIT TANDEM VW TRASPORTER/TOUREG/PHAETON

Note: 070145209H=F=J, 07Z145209B=C=D

SRN.103.405

SRN.103.406

REPAIR KIT TANDEM VW TOUREG

Note: 07Z127025F=E

SRN.103.407

REPAIR KIT TANDEM VW GOLF

Note: 038145101B

VERSION 03 | UK | 04/18

60 |

CAM-BOX EUI/EUP

CAM-BOX electronic part

CAM-BOX mecanical part

SIMULATOR TESTER CAM-BOX FOR INJECTOR-PUMPS EUI, TIPE UI-UPI, PDE, PLDCAPABILITY: 2 AND 4 PIN (NO PIEZO)

SRN.103.500

ELECTRONIC SIMULATOR FOR UNIT INJECTION SYSTEM (UIS, EUI, UPS)

UNIVERSAL PIEZOELECTRIC SENSOR FOR CAM-BOX APPLICATION. TO BE USED FOR READING THE BIP POINT ON THE EUI UNITINJECTORS

Note: TO BE USED WITH DGiC-CB SIMULATOR AND OLD VERSION CBCR-CB

SRN.103.501

SRN.103.502

04/18 | UK | VERSION 03

| 61

CAM-BOX EUI/EUP

CAM-BOX electronic part

CAM-BOX mecanical part

UNIVERSAL CAM-BOX THAT FITS MOST CONVENTIONAL

TEST BENCHS IN THE MARKET (h:125mm) for UIS systems

SRN.103.800

MADE WITH SPECIFIC DESIGN THAT FITS MOST CONVENTIONAL TEST BENCHS like BOSCH or similar WITH BOSCH FEATURES CENTERING SIZE Ø20mm HEIGHT 125mm.

* If you want use that Cam-Box on any different test benches it is mandatory control before the centering and height size. We can provide to you a specific

plate to adjust the Cam-Box features.

TECNICAL FEATURES

VERSION 03 | UK | 04/18

62 |

CAM-BOX MECANICAL PART

Accessories base kit

Accessories optional

LIFTING HANDLE AND LOCKING PIN (SRN.103.800-8)

BRACKET USE TO FIX the EUI in to the test adaptor «L» (SRN.103.800-2)

N°2 CYLINDRICAL CENTERING GUIDE SIZE Ø20MM (SRN.103.800-9)

BASIC HARDWARE BOLTSkit compose with: 1 overflow valve, 1 banjo bolt, 2 banjo, and washer (SRN.103.800-5)

CAMSHAFT H8MM (SRN.103.800-6)

PROTECTIVE PROXIMITY COVER (SRN.103.800-7)

Bosch Volvo/Iveco TEST ADAPTOR standard forniture (SRN.103.801)

N°4 BUSHES/GLASSES to capture the calibration testing oil (SRN.103.800-13)

BRAKET FOR FIXING THE BUSHES/GLASESE

and to pull out the EUI from the adaptors

2 TAPPET SCREWS concave and convex (SRN.103.800-14)

RILSAN PIPE/HOSE Ø6MM to be used with

«A» and «D» (SRN.103.800-15)

N°3 PROTECTIVE SPURT and cover tappet (SRN.103.800-12)

BREAK SPRAY ADAPTOR to collect the spray

in to the burette (SRN.103.800-15)

04/18 | UK | VERSION 03

| 63

Test bench Coupling with cone 30mm size and special nut to fix and unlock the coupling

on the shatf


SRN.105.030

Couple of Volkswagen test adaptors 1° Series (SRN.103.802-01) and 2° Series (SRN.103.802-02).

Kit compose with Bushes/Glasses to capture the calibration testing oil and Bracket use to fix the EUI

in to the test adaptor

Note: for UI 0414720.0xx - .1xx - .2xx - .3xx - .4xx

SRN.103.802

IVECO Cursor test adaptor

Note: for Cursor 8 – 350CV (type little)It’s mandatory use the little camshaft

SRN.103.803

Land Rover test adaptor. Kit compose with Bushes/Glasses to capture the calibration testing oil and

Bracket use to fix the EUI in to the test adaptor

Note: for UI similar BEBE2A01xxx

SRN.103.804


Accessories base kit


VERSION 03 | UK | 04/18

64 |

Scania test adaptor. Kit compose with tappet screw

Note: for UI similar 0414701005.Some times it’s necessary remove the Oring

SRN.103.805

Volvo Delphi and Iveco Stralis test adaptor.

Note: for UI Delphi 2 & 4 PIN – 500/520HP

SRN.103.806

John Deere test adaptor

Note: for UI-RE533608

SRN.103.807

Caterpillar – CAT15 test adaptor. Kit compose with specific Connector-Bushes to capture the calibration testing oil, Bracket use to fix the EUI in to the test adaptor and Protective spurt/cover tappet

Note: for CAT-15

SRN.103.808




04/18 | UK | VERSION 03

| 65




Caterpillar – CAT10 test adaptor. Kit compose with specific Connector-Bushes to capture the

calibration testing oil

Note: for CAT-10

SRN.103.809

Detroit diesel test adaptor. Kit compose with specific Connector-Bushes to capture the calibration testing oil, Bracket use to fix

the EUI in to the test adaptor

Note: for DETROIT

SRN.103.810

CUMMINS test adaptor. Kit compose with specific Connector-Bushes to capture the calibration

testing oil, Bracket use to fix the EUI in to the test adaptor

Note: for CUMMINS

SRN.103.811

CAMSHAFT (SRN.103.xxx) size 11,5mm

Note: to be used with all the big EUI UI-UP

SRN.103.801-2

VERSION 03 | UK | 04/18

66 |

Accessories optional NOP test adaptors

Mercedes ACTROS test adaptor. Kit compose with injector test adaptor

Note: for UP Actros

SRN.103.812

Mercedes ATEGO test adaptor. Kit compose with injector test adaptor

Note: for UP Atego

SRN.103.813

RENAUL DAF, MAK test adaptor. Kit compose with injector test adaptor and specific connector-bushe to capture the calibration testing oil

Note: for UP Daf-Mak

SRN.103.814


04/18 | UK | VERSION 03

| 67

Accessories optional NOP test adaptors

CAM-BOX ACCESSORIE CORRELATED

NOP calibration test-adaptor to be used on EUI SCANIA, to verify the Nozzle Opening Pressure

Note: thread size 31x1mm

SRN.103.703

NOP calibration test-adaptor to be used on EUI Volvo and Iveco Cursor 350 type, to verify the

Nozzle Opening Pressure


SRN.103.704

NOP calibration test-adaptor to be used on EUI Volvo FH12, Volvo Type 420 and 460 pumps and

CAT L10, to verify the Nozzle Opening Pressure

Note: thread size 28x1mm. Transverse hole

SRN.103.705

NOP calibration test-adaptor to be used on EUI Volvo 460 Euro 2 type and Scania, to verify the


Note: thread size 31x1mm. Transverse hole

SRN.103.708

VERSION 03 | UK | 04/18

68 |

NOP calibration test-adaptor to be used on EUI Caterpillar and John Deere, to verify the Nozzle Opening Pressure


SRN.103.709

NOP calibration test-adaptor to be used on EUI AUDI/VW 2, to verify the Nozzle Opening Pressure

Note: Volkswagen 2

SRN.103.710

NOP calibration test-adaptor to be used on EUI Volkswagen, to verify the Nozzle Opening Pressure

Note: universal

SRN.103.711

NOP calibration test-adaptor to be used on EUI Land Rover, to verify the Nozzle Opening Pressure

Note: Land Rover

SRN.103.712


NOP test adaptors NOP test adaptors

04/18 | UK | VERSION 03

| 69

NOP calibration test-adaptor to be used on EUI Detroit, to verify the Nozzle Opening Pressure

Note: Detroid

SRN.103.713

NOP calibration test-adaptor to be used on EUI Cummins L10-M11, to verify the Nozzle Opening

Pressure

Note: Cummins L10-M11

SRN.103.714

NOP calibration test-adaptor to be used on EUI Cummins N14, to verify the Nozzle Opening

Pressure

Note: Cummins N14

SRN.103.715

NOP calibration test-adaptor to be used on EUI Volvo 520HP, to verify the Nozzle Opening Pressure

Note: Volvo 520HP

SRN.103.716



VERSION 03 | UK | 04/18

70 |

NOP calibration test-adaptor to be used on EUI CAT 3500 series, to verify the Nozzle Opening Pressure

Note: Caterpillar series 3500 thread size 27x1,5mm

SRN.103.717

NOP calibration test-adaptor to be used on EUI CAT marine application, to verify the Nozzle Opening Pressure

Note: Caterpillar marine applicationthread size 36x1,5mm

SRN.103.718

NOP calibration test-adaptor to be used on EUI Nissan 440, to verify the Nozzle Opening Pressure

Note: Nissan 440,thread size 31x1mm

SRN.103.719

NOP calibration test-adaptor to be used on EUI Iveco Stralis 500HP, to verify the Nozzle Opening Pressure

Note: Iveco Stralis 500HPthread size 36x1mm

SRN.103.720



04/18 | UK | VERSION 03

| 71

NOP calibration test-adaptor to be used on EUI Audi, VW. 04147203, to verify the Nozzle Opening

Pressure

Note: Audi, VW. 04147203Similar: 1.683.355.057

SRN.103.721

NOP calibration test-adaptor to be used on EUI Audi, VW. 04147200xx/2xx/4xx/6xx, to verify the


Note: Audi, VW. 04147200, 04147202, 04147204, 04147206

Similar: 1.683.355.056

SRN.103.722

NOP calibration test-adaptor to be used on EUI Audi, VW 2 (2.0l), to verify the Nozzle Opening

Pressure

Note: Audi, VW 2,Similar: 1.681.398.033

SRN.103.723

NOP calibration test-adaptor to be used on EUI Audi, VW Siemens VDO piezo, to verify the Nozzle

Opening Pressure

Note: VW Siemens VDO Piezo

SRN.103.724



VERSION 03 | UK | 04/18

72 |

NOP calibration test-adaptor to be used on EUI Audi, CUMMINS, to verify the Nozzle Opening Pressure

Note: Cummins, America thread

SRN.103.725

NOP calibration test-adaptor to be used on EUI Audi, VOLVO DELPHI 4PIN, to verify the Nozzle Opening Pressure

Note: Volvo Delphi 4 pin, thread size 34x1mm

SRN.103.726

NOP calibration test-adaptor to be used on CAT C7, to verify the Nozzle Opening Pressure

SRN.103.727


NOP test adaptors Various

04/18 | UK | VERSION 03

| 73

NOP test adaptors Various

GAS-OIL STEAM ASPIRATOR WITH QUICK CONNECTOR

Note: to be used with SRN.104.005

SRN.104.060

HAND DIESEL ENGINE INJECTOR TESTER

Note: STANDARD VERSION WITH 0-400BAR GAUGE, POSSIBLE TO MODIFY GAUGE FROM 0-600BAR AND

AGAIN USING THE GAUGE WITH GLYCERINE.

SRN.104.005

CENTESIMAL DIGITAL GAUGE WITH LCD SCREEN, RESOLUTION 0,01MM

Note: CONVERSATION MM/INCH

SRN.104.002

DIGITAL MILLESIMALE COMPARATOR, 12,5 MM - 0,001 MM

Note: CONVERSATION MM/INCH

SRN.104.003

DIESEL

VERSION 03 | UK | 04/18

74 |

Various Various

MILLESIMAL DIGITAL MICROMETER FOR EXTERNAL 0-25MM

SRN.104.015

CENTESIMAL MICROMETER FOR EXTERNAL 0-25MM

SRN.104.019

CENTESIMAL COMPARATOR, 10 MM - 0,01 MM

SRN.104.010

UNIVERSAL SUPPORT FOR MICROMETERS

SRN.104.016

QUICK CONNECTION 1/8 FEMALE

QUICK CONNECTION 1/8 MALE

SRN.104.007

SRN.104.008

DIESEL

04/18 | UK | VERSION 03

| 75

Various Various

COUPLES LEVER FOR DIESEL FUEL FILTER OPEL / FIAT

Note: TO REMOVE THE FUEL PIPES

SRN.104.009

ENGINE CAMSHAFT RENAULT DCI 1,5

SRN.104.011

KIT FOR EXTRACTION OF BROKEN OR DAMAGED CANDLETTES (MM9X1)

SRN.104.012

KIT FOR EXTRACTION OF BROKEN OR DAMAGED CANDLETTES (MM8X1 - MM9X1 - MM10X1)

SRN.104.014

EXTENSION 1/2” 50MM

SRN.104.020

DIESEL

VERSION 03 | UK | 04/18

76 |

VARIOUS

Various Various

TOOL TO LOCK DRIVING PULLEY WHILE SETTING

Note: RENAULT 1,5 - 1,9 DCI

SRN.104.022

TIMING TOOL FOR OPEL 1.0 - 1.2 - 1.4 16V

SRN.104.023

TIMING TOOL FOR RENAULT 2.0 DCI

SRN.104.024

TIMING TOOL FOR OPEL ANTARA / CHEVROLET CAPTIVA

TIMING TOOL FOR RENAULT 2,2 DCI E 2,5 DCI

SRN.104.025

SRN.104.026

04/18 | UK | VERSION 03

| 77

VARIOUS

Various Various

TIMING TOOL FOR CHRYSLER 2.5-2.8 CRD

Note: VOYAGER - CHEROKEE (4PCS)

SRN.104.027

TIMING TOOL FOR F1A -F1C IVECO DAILY E DUCATO 2.3 - 2.8 - 3.0CC

SRN.104.028

TIMING TOOL FOR AUDI 1.2 FTSI 8V TURBO, VW, SKODA 1.1-1.6 FSI-TSI

SRN.104.029

TIMING TOOL FOR BMW 2.0

TIMING TOOL FOR MULTIJET 1.6

SRN.104.030

SRN.104.031

VERSION 03 | UK | 04/18

78 |

ULTRASONIC CLEANING TANK ULTRA STRONG FOR THE CLEANING OF ALL TYPES OF INJECTORS AND PUMPS DIESEL AND PETROL. COMPLETE WITH TEMPERATURE SENSOR AND LEVEL. ADJUSTABLE TIMER

Note: CAPACITY 5L, SOLD WITH A BASKET SRN.104.038 + SUPPORT FOR INJECTOR SRN.104.039

SRN.104,036

ULTRASONIC CLEANING TANK ULTRA STRONG FOR THE CLEANING OF ALL TYPES OF INJECTORS AND PUMPS DIESEL AND PETROL. COMPLETE WITH TEMPERATURE SENSOR AND LEVEL. ADJUSTABLE TIMER

Note: CAPACITY 3,5L, SOLD WITH A BASKET SRN.104.038 + SUPPORT FOR INJECTOR SRN.104.039

SRN.104,037

INOX BASKET FOR THE ULTRASONIC TANK

Note: SUPPLIED WITH SRN.104.036 OR SRN.104.037

SRN.104,038

SUPPORT FOR INJECTORS FOR THE ULTRASONIC TANK

Note: SUPPLIED WITH SRN.104.036 OR SRN.104.037

SRN.104,039

VARIOUS

Ultrasonic tank Various

04/18 | UK | VERSION 03

| 79

FUEL

Ultrasonic tank Various

FILTER’S PULLER FOR GASOLINE/GAS/CNG/LPG/GDI INJECTORS

SRN.201.000

VERSION 03 | UK | 04/18

80 |

SPARE PARTS KIT FOR PETROL INJECTOR (BOSCH, DELPHI, WEBER). TOTAL: 460 PCS

KIT INCLUDED:

O’RING IVECO (50PCS)

Note: REF. 14453981

SRN.202.000/1

O’RING VITON 1.280.210.800 (10PCS)

Note: REF. 1520210099

SRN.202.000/2

O’RING VITON, 7,66X1,78MM (50PCS)

O’RING BLACK BOSCH EV1, EV6, EV12, EV14, WEBER (100PCS)

SRN.202.000/4 SRN.202.000/5

O’RING VITON, 10,82X1,78MM (50PCS)

SRN.202.000/6

SRN.202.000

O’RING BOSCH EV1 BI-FUEL, 7,80X3,60MM (50PCS)

Note: REF. 9270291-4100123

SRN.202.000/3

FUEL - VARIOUS

Fuel - Various Fuel - Various

04/18 | UK | VERSION 03

| 81

O’RING VITON VW, AUDI, 14X1,78MM.(50PCS)

Note: REF. 2430210080

PETROL FILTER INJECTOR (WEBER APPLICATIONS) (20PZ)

PETROL PLUG BOSCH INJIECTOR (20PCS)

Note: REF. 1280423712

PETROL FILTER INJECTOR (BOSCH APPLICATIONS) (20PZ)

PETROL FILTER INJECTOR (BLU COLOR)(20PZ)

PLUG FOR PETROL INJIECTOR (20PCS)

Note: BLU COLOR

SRN.202.000/7

SRN.202.000/9

SRN.202.000/11

SRN.202.000/8

SRN.202.000/10

SRN.202.000/12

FUEL - VARIOUS

Fuel - Various Fuel - Various

VERSION 03 | UK | 04/18

82 |

VARIOUS

LIQUID FOR ULTRASONIC TANK DIESEL INJECTORS

Note: 1 LITERFOR CLEANING METALS, PLASTIC, CERAMIC, GLASS

SRN.104.017

LIQUID FOR ULTRASONIC TANK GASOLINE INJECTORS

Note: 1 LITERTO BE USED FOR CLEANING ALUMINUM, ZINC AND COOPER

SRN.203.001

TESTING FLUID FOR FUEL INJECTORS (4LT) FOR GS AND GD SERIES MACHINES

SRN.302.R4L

ULTRASONIC SOLVENT DIESEL+ BENZINA (4LT)

Note: CARBONZAPP

SRN.30.Y4L

Various Various

04/18 | UK | VERSION 03

| 83

Various Various

VARIOUS

LIQUID FOR TEST BENCH ENI (20L). ENI FLUID CALIBRATION

SRN.105.401

HIGH QUALITY LIQUID FOR DIESEL TEST BENCH FOR DIGITAL READING, VISCOR (20L)

Note: BOSCH APPROVED

SRN.105.001

POWDER TO WASH ALUMINUM IN ULTRASONIC TANK

Note: TO DILUTE WITH WATER

SRN.30.Y4L

SRN-MI srl

| Via Monte Bianco, 30 20010 VITTUONE (Milan) - ITALY

| Tel./Fax +39 02 9020447

| www.srn-mi.it - [email protected]

M I L A N O

OFFICIAL DISTRIBUTOR

Documents

TOOLS and EQUIPMENTdieseltest.com/wp-content/uploads/2018/04/SRN-Brochure-UK_03-aprile18.pdf · valve for injectors common rail piezo bosch srn.101.400 pin for injectors common rail