Toolroom Innovations

www.ToolingDocs.com 1-800-257-8369

toolroom bench

Bench Optimized for Mold Assembly/Disassembly:• More efficient mold assembly and disassembly.• Convenient working height.• Shelf for storage.• 3´ X 12´ working area.• 5/8” thick Blanchard Ground steel work surface for

smooth and easy positioning of mold plates.• Radiused corners on legs to reduce knee injuries.• Bench is all-welded construction.

Standardized Design:• Adopt best practices across your facility.• Consistent so all work areas are equal.

Tool Storage Option:• Organize tool storage.• Easy access to tools needed on the bench.• Prevent clutter.• Pre-drilled holes and repositionable aluminum pegs

for organized and flexible tool storage.• Tool Storage unit fits under one section of the bench.• Diamond plate for durability.• 2” setback and inclined back at an angle to keep

tools within bench.• Each tool storage unit includes 1 board on each side of bench.

34½"

143"

AREV

EP-MIN.DRW

SEE TABLEHARDNESS:

UNLESS SPECIFIEDINCH TOLERANCES:.XX ±.005.XXX ±.001.XXXX ±.0005ANGULAR: ±.25° 1 / 2

MATERIAL:

SCALE: 1:1 PAGE:FILE NAME:

PART NUMBER:EJECTOR PIN

PROJECTION:

PART NAME:TREATMENT:

OTHER:

235 INDUSTRIAL DRIVEWAUCONDA, IL 60084PHONE: 847-4871000

WWW.PROCOMPS.COM

SEE NOTES

SEE NOTESSEE NOTES

SEE NOTES

36"

Ground Steel Surface

Toolroom Innovations

www.ToolingDocs.com 1-800-257-8369

toolroom bench

Water Manifold and Flowmeter Option:• Manifold and valves allow quick connection for

mold water testing.• Flow meter can be used to ensure flow is even and

there are no restrictions.• Ability to bench test for leaks saves valuable time

versus testing in the press.• Red and blue manifold similar to what is at the press.• Convenient drain feature provides cleaner, more

efficient drainage after testing.

Ordering and Configuration Information:

Air Manifold Option:• Convenient connection of air tools.• One on each side of the bench.• Hooks to hold air hose.

Electrical Option:• 2 outlets on either side of the bench.• Electrical hookups are routed under the bench to

minimize obstructions.• Positioned centrally on bench for easy access.

TRB34 - F T A E

Options:F = Manifold and Flow MeterT = Tool Storage A = Air E = Electrical

Note: Standard Toolroom Bench dimensions are 3´ wide, by 12´long and 34˝ high. Custom configurations are available by request.

Examples:TRB34-FTAE = Toolroom Bench with all Options InstalledTRB34-AE = Toolroom Bench with Air and Electric Options Installed