Tool Kits - Bell Scott Engineering Suppliers

26 217

HandTo

ols

All prices exclude VAT and are subject to availability

TCMM1001N 1001 piece tool kitA 1001 piece tool kit, the most complete tool kit

supplied in the Teng Tools range. Built up using theunique Teng Tools TC tray system and covering just

about every tool most people ever need. Supplied ina TC806NF/TC803N/TCW810N 8 series ball bearing

top box/middle box/roller cabinet combination.

Stock No PRICE

TCMM1001N €€4,990.00

Continued on page 218

MDM708 8 piece mini screwdriver set1479MM 9 piece ball point hex key wrench set1479AF 9 piece AF ball point hex key wrench set1479TX 9 piece TX wrench set

Stock no Description

Top Box drawers

Tool Kits

TTPS09 9 piece general tool kit with PS tray


218

Hand To

ols

Tool Kits

TCMM1001N 1001 piece tool kit (Continued from page 217)A 1001 piece tool kit, the most complete tool kit supplies in the Teng Tools range.Built up using the unique Teng Tools TC tray system and covering just about everytool most people ever need. Supplied in a TC806NF/TC803N/TCW810N 8 seriesball bearing top box/middle box/roller cabinet combination.

Stock No PRICE

TCMM1001N €€4,990.00

TTHEX7 7 piece T handle hex driversTTNR81 81 piece nut rivet setTTTX7 7 piece T handle TX/TPX driversTTHR81 81 piece hand rivet set


TT1236 12 piece mm combination spanner setTTALU 32 piece socket clip rail setTTTMO3 3 piece inspection tool setTT6208 8 piece open ended spanner set


TTPC09 9 piece punch and chisel setTTID20 20 piece 1/2” drive impact driver setTTSR04 4 piece scraper and remover setTT00 Add on tool tray


TTHP08 8 piece hook and pin wrench setTT6506 6 piece double flex wrenchesTT6010M 10 piece midget combination spanner setTT3592 8 piece AF combination spanner sett


TTXPB3 3 piece roll/heel bar setTTX6311 11 piece mm double ring spanner set


Top Box drawers Middle Box drawers

TTXEXT13 13 piece extension setTT1435 35 piece 1/4” drive regular/deep metric socket setTT3819 19 piece 3/8” drive metric socket setTT1217 17 piece 1/2” drive regular metric socket setTT1205 5 piece 1/2” drive socket accessories



Roller cabinet drawers

TTXMDT 5 piece power thru screwdriver setTT9116 16 piece 1/2” drive regular/deep impact socket setTTALU 32 piece socket clip rail setTTHEX23 23 piece metric hex bit socket setTTTX23 23 piece 40/70mm TX bit socket set



26 219

Hand To

ols

Tool Kits

TTX918 8 piece Mega Drive screwdriver setTT917 7 piece Mega Drive screwdriver setTT917TX 7 piece TX/TPX Mega Drive screwdriver setTTMD74 74 piece ratchetting bits driver setTTMI16 16 piece mini plier/screwdriver set


TTX474-9 4 piece 9” circlip plier setTT440-T 4 piece Mega Bite plier setTT474-7 4 piece 7” circlip plier setTT474-5 4 piece 5” circlip plier setTTHC03 3 piece hose clamp set


TTX1292 1/2” drive torque wrenchTTV440 4 piece 1000 v insulated plier setTTCP121 121 piece crimping tool setTTV907 7 piece 1000 v screwdriver setTT01 Add on tool tray with dividers


TTX2032 7 piece mm combination spanner setTTX3892 22 piece 3/8” drive torque wrench setTTXPB3A 3 piece pry bar set


TTX01 Add on tool tray width dividersTT804 2 in 1 puller setTTOS16 16 piece oil service setTTSN11 11 piece stud and nut remover setTTTD17 17 piece tap and die set mm


TTX3404 4 piece 3/4” drive socket accessories setTTX3414 14 piece 3/4” drive metric socket set


TTXMDN 9 piece nut driver setTTPSPG 4 piece power grip pliers with PS tray


TTX2640 7 piece AF combination spanner setTTTXH15 15 piece 1/2” drive long bits socket setTT1215AF 15 piece 1/2” drive AF regular socket setTTAF32 32 piece 1/4” and 3/8” drive regular/deep AF socket setTTTX30 30 piece 1/4” and 3/8” drive TX, TPX and TX-E socket set



ABS-TOP ABS top for roller cabinet580 Magnetic Bits tray


220

Hand To

ols


Tool Kits

569 piece Mega Master setA 569 piece tool kit containing tools for the industrial sector, built up using the unique Teng Tools TC tray system.

Supplied in the TCW809N 8 series 9 drawer roller cabinet with a wooden top plate.

TCMMIND08 €€4,300.00

Get Organised with Teng Tools!Teng Tools is rather unique in that it offers a complete system that enables you tobuild your own tool kit in a structured and highly organised way. With a choice ofdifferent types of tool box and over 100 different tool trays supported by the webbased click and fill computer programme. However, to make the choice a littleeasier Teng Tools have put together a selection of suggested tool kits. Rangingfrom a small carrying tool kit to the massive 1,001 piece Mega Master these suggestions have been developed in conjunction with leading experts from theautomotive and industrial trades.

• Choose from our suggested tool kits or design your personal kit. • A choice of over 80 different TC trays, double width TC trays and over 20 of the full width TTX trays plus 8 of the drawer size PS tray sets gives the flexibility to compile individual but highly organised and space efficient tool kits

• A choice of 20 ball bearing slide tool boxes and roller cabinets or TC tray set carrying cases.• Use any combination of trays and tool boxes to create an almost endless variety of tool kits suitable for any type of use.• Use “click and fill” the unique web based tool kit design programme on wwwwww..mmeeggaammaasstteerr..ccoo..uukk to build your own tool kit onscreen.

Stock No PRICE

Stock no DescriptionStock no Description

TTXEXT13 13 piece extension setTT1435 35 piece 1/4” drive regular metric socket setTT3819 19 piece 3/8” drive regular metric socket setTT1217 17 piece 1/2” drive regular metric socket setTT1205 5 piece 1/2” drive socket accessories

Continued on page 221

TTX474-9 4 piece 9” circlip plier setTTDCT05 5 piece cutting tool setTTVG05 5 piece power grip plier setTT440-T 4 piece Mega Bite plier set

Spare drawer

569 piece Mega Master set (Continued from page 220)A 569 piece tool kit containing tools for the industrial sector, built up using the unique Teng Tools TC tray system.Supplied in the TCW809N 8 series 9 drawer roller cabinet with a wooden top plate.

26 221

Hand To

ols


Tool Kits

TCMMIND08 €€4,300.00

Stock No PRICE


TTX2640 7 piece AF spanner setTT3816 16 piece 3/8” drive deep metric socket setTTAF32 32 piece 1/4” and 3/8” drive regular and

deep socket setTT1215AF 15 piece 1/2” drive AF regular socket setTT3592 8 piece AF combination spanner set


TTX918 8 piece Mega Drive screwdriver setTT917 7 piece Mega Drive screwdriver setTT917TX 7 piece TX/TPX Mega Drive screwdriver setTTMD74 74 piece ratchetting bits driver setTTDB28 28 piece drill bits set 1-13mm


TTX2032 7 piece mm combination spanner setTT474-7 4 piece 7” circlip plier setTT6208 8 piece open ended spanner setTT1236 12 piece mm combination spanner setTT6508R 8 piece ratchetting combination spanner set


TTX3404 4 piece 3/4” drive socket accessory setTTTM08 8 piece pick up tool set with lightTTTX7 7 piece T handle TX/TPX driver setTTHEX7 7 piece T handle hex driver setTTHT28 28 piece hex and TX key set


TTX3414 14 piece 3/4” drive metric socket setTTID20 20 piece 1/2” drive industrial impact driver setTT9120D 20 piece 1/2” drive impact regular and

deep socket set - DIN standardTT9207 7 piece 1/2” drive impact accessory set128640109 5 piece LiMiT measuring set


TTXF05 5 piece 10” file setTTTXH15 15 piece 1/2” drive long bits socket setTTRS15 15 piece 1/2” drive RIL and Spline bits socket setTTBS35 35 piece 1/4” and 3/8” drive TX, TPX and TX-E setTTTX30 30 piece 1/4” and 3/8” drive TX, TPX and TX-E

socket set

222

Hand To

ols

Tool Kits

491 piece Professional Mechanics Starter KitA 491 piece general tool kit completely built up using the unique

Teng Tools TC tray system, supplied in a TCW807N, 8 series ball bearing roller cabinet.

TCMM491N €€1,995.00

Stock No PRICE


TTXMDN 9 piece nut driver setTT1435 35 piece 1/4” drive regular/deep socket setTT3819 19 piece 3/8” drive regular metric socket setTT1236 12 piece metric combination spanner setTT6208 8 piece metric double ended spanner set

TTXMDT 5 piece power thru screwdriver setTTMD74 74 piece ratcheting bits driver setTTHEX7 7 piece metric hex T handle driver setTT917 7 piece screwdriver setTT917TX 7 piece TX/TPX screwdriver set


TTX00 add on TTX trayTT440-T 4 piece Mega Bite plier setTTPC09 9 piece punch and chisel setTTCP121 121 piece crimping tool setTTTX7 7 piece TX/TPX T handle drivers

TTX01 add on tool tray with dividersTTPS09 9 piece general tool kit with PS tray


TTXEXT13 13 piece extension setTT1217 17 piece 1/2” drive regular metric 6 point

socket setTT1205 5 piece 1/2” drive socket accessoriesTTTXH15 15 piece 1/2” drive 100mm long bit socket setTTALU 32 piece socket clip rail set

TTX2032 7 piece metric combination spanner setTTHR81 81 piece hand rivet setTT804 2 in 1 puller setTT474-7 4 piece 7” circlip plier setTT01 add on tool tray with dividers


26 223

Hand To

ols

Tool Kits

Mechanics Starter Kit51 piece mechanics starter kit including 4 TC trays containing 3/8”drive socket set, combination spanners, screwdrivers and pliers plusan assortment of general mechanics hand tools in the bottomdrawer. Supplied in the 8 series TC806NF ball bearing slide top box.

TC8051NF €€669.50

TC8131NF €€630.00

Stock No PRICE


TT440-T 4 piece Mega Bite plier setTT3819 19 piece 3/8” drive regular metric socket setTT917 7 piece Mega Drive screwdriver setTT1236 12 metric combination spanner set


TTPS09 9 piece general tool kit


TT1435 35 piece 1⁄4” drive regular/deep metric socket set

TT3819 19 piece 3⁄8” drive regular metric socket setTT1217 17 piece 1⁄2” drive regular metric socket setTT1205 5 1⁄2” drive socket accessories


TT1236 12 metric combination spannersTT917 7 piece Mega Drive screwdriver setTT440-T 4 piece Mega Bite plier setTTALU 32 piece socket clip rail set

Stock No PRICE


Technicians starter kit131 piece technicians starter kit including 8 TC trays containing 1/4”,3/8” and 1/2” drive socket sets, combination spanners, screwdrivers and pliers. Supplied with the 8 series TC806NF ball bearing slide top box.

224

Hand To

ols


Tool Kits

140 piece Service kit140 piece service kit based on the 131 piece technicians starter kit

but also including the TTPS09 tray set that includes adjustablewrenches, power grip pliers, utility knife, hack saw, hammers, a measuring tape and a steel rule. Supplied with the 8 series

TC806NF ball bearing slide top box.

TC8140NFA €€650.00

Mega Rosso Mechanics kitComplete Mega Rosso mechanics kit including 1/4”, 3/8” and 1/2” drive socket sets and combination spanners in a barn style box

with unique socket storage.

TC187 187 piece 1/4”, 3/8” and 1/2” drive Metric Mega Rosso Tool Kit(450x1200x200mm, 11.0 kilos)

Accessories 1/4” drive 30 socket clips, FRP ratchet, universal joint, 2” and 4” extensions, 3/8”F:1/4”M adaptor, coupler adaptorAccessories 3/8” drive 30 socket clips, FRP ratchet, universal joint,6” extension, 1/2”F:3/8”M adaptorAccessories 1/2” drive 30 socket clips, FRP ratchet, universal joint,21/2” and 6” extensions, 3/8”F:1/2”M adaptorRegular sockets 1/4” drive 6 point 4, 5, 5.5, 6, 7, 8, 10, 11, 12, 13mmDeep sockets 1/4” drive 6 point 6, 7, 8, 10, 12, 13mmRegular sockets 3/8” drive 6 point 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 21, 22mmRegular sockets 1/2” drive 12 point 10, 11, 12, 13, 14, 15, 16,17,18, 19, 21, 22, 24, 27, 30, 32mmBits 1/4” hex TX8, TX10, TX15, TX20, TX25,TX27, TX30, TX40, 3mm hex, 4mm hex, 5mm hex, 6mm hex, 7mm hex,

8mm hex, 10mm hex, PH1, PH2, PZ1, PZ2, 4mm flat, 5.5mm flat, 7mm flat.Wrenches 8, 10, 11, 12, 13, 14, 15, 17, 19mm combination spanners, ring holder,1.5, 2.0, 2.5mm hex keys

TC187 €€385.00

Stock No PRICE


TT1236 12 metric combination spannersTT917 7 piece Mega Drive screwdriver setTT440-T 4 piece Mega Bite plier setTTALU 32 piece socket clip rail set

TTPS09 9 piece general tool kit



TT3819 19 piece 3⁄8” drive regular metric socket setTT1217 17 piece 1⁄2” drive regular metric socket setTT1205 5 1⁄2” drive socket accessories

Stock No PRICE

26 225

Hand To

ols


Tool Kits

Electricians Tool kitElectricians tool kit using the TC-3 carrying case containing 7 piece1000 volt screwdriver set, 4 piece 1000 volt plier set and 121 piececrimping tool set in TC trays. (470x320x65mm, 5.1 kilos)

TC-3ELC €€175.00

Mechanics service kitA 22” cantilever tool box containing a comprehensive selection ofscrewdrivers, pliers, spanners and other regular hand tools.

TC484 48 piece General mechanics tool kit(560x205x205mm, 15.2 kilos)

Wrenches 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mm combination spanners, ring holder,10” adjustable wrench, 12” pipe wrench,metric hex key set

Pliers 7” combination, 6” cutting, 8” long nose,10” groove joint, 7” straight/inner circlip,7” straight/outer circlip, 10” power grip

Screwdrivers 3.2mm flat, 5mm flat, 6mm flat, PH0, PH1, PH2Service tools 200mm cold chisel, centre punch, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm parallel

pin punches, ball pein hammer, soft face hammer, hacksaw, 3 meter measuring tape

TC484 €€395.00

Stock No PRICE

Stock No PRICE

Mecca Rosso Socket Sets 3⁄8” Drive48 piece 3/8” drive set containing 6 point regular metric and AF sockets,2 spark plug sockets, 14 combination spanners, 6 screwdrivers, 5 pliers,adjustable wrench, ratchet, 3” and 6” extension bars, coupler adaptorand 1/2”-3/8” adaptor. Supplied in a case with click lock and folding handle. The underside of the case is fitted with rubber feet to prevent it from sliding.

MR3848 48 piece 3/8” drive Socket/tool set(450x230x105mm, 6.0 kilos)

Accessories 3/8” drive Ratchet, universal joint, 3” and 6” extension bars,coupler adaptor, 1/2”F:3/8”M adaptor, 16 and 21 spark plug sockets

Regular sockets 3/8” drive 6 point 7/16”, 1/2”, 9/16”, 11/166 point 8, 10, 12, 13, 14, 15, 16, 17, 18, 19mm

Combination spanners AF 7/16”, 1/2”, 9/16”, 11/16mm 8, 10, 12, 13, 14, 15, 16, 17, 19mm

Screwdrivers 3.2mm flat, 5mm flat, 6mm flat, PH0, PH1, PH2,Pliers 6” side cutter, 7” combination, 8” long nose, 10” water pumpPower grip pliers 7” curved jawAdjustable wrenches 8” phosphate finish

MR3848 €€295.00

Stock No PRICE

226

Hand To

ols


Tool Kits

Mecca Rosso Socket Sets 3⁄8” Drive67 piece 3/8” drive tool set containing regular 6 point metric sockets,fibre reinforced ratchet handle, universal joint, 3” and 6” extension

bars, coupler adaptor, 1/2”- 3/8” adaptor, bits driver with magnetic bitsholder, 10 combination spanners, 6 screwdrivers, 4 pliers as well as26 bits. Supplied in the Mecca Rosso carrying case with click lockand folding handle. Tool mat in the case lid. The underside of the

case is fitted with rubber feet to prevent it from sliding.

MR3867 67 piece 3/8” drive Socket and Tool Set(550x280x60mm, 4.7 kilos)

Accessories 3/8” drive FRP ratchet, 3” & 6”extensions, coupler adaptor,1/2”F:3/8”M T-bar adaptor, bits driver handle with magnetic bits holderRegular sockets 3/8” drive 6 point 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 22mmCombination spanners 8, 10, 11, 12, 13, 14, 15,16, 17, 19mmScrewdrivers 3.2mm flat, 5mm flat, 6mm flat,PH0, PH1, PH2,Pliers 6” side cutter, 7” combination, 8” long nose, 10” water pumpBits 1/4” hex TX8, TX10, TX15, TX20, TX25, TX27,TX30, TX40, TX45, TX50, 3mm hex,4mm hex, 5mm hex, 6mm hex, 8mm hex, 10mm

hex, PH0, PH1, PH2, PH3, PZ1, PZ2, PZ3, 4mm flat, 5.5mm flat, 7mm flat

MR3867 €€250.00

Stock No PRICE

With quality, manoeuvrability and design in mind Teng Tools has developed a new way of organising your tools, even when you are on the move! It is called the Teng Tools Take Awayand is an extension to the Teng Tools tool storage concept and a part of the patented system.

The caseAluminium frame and plastic body to make it strong and stable. Wheels are made from rubber and have a spring function to give the casea smooth ride and prevent it from sliding. Stainless steel telescopic handle is long enough to be comfortable and is tested to 195 kilos weightcapacity. To keep the tools safe there is a key lock as well as a combinationlock. Non slip rubber feet to prevent sliding or damage to paintwork.

Tool storagePart of the Teng Tools tool storage system and holds up to nine TCtrays with three trays in each of three compartments or one compartment can be used to hold the SCPS01 set of six general purpose tools. One compartment for storing loose items such asscrews, nuts and other necessities you need to do your work. Each compartment has a transparent lid to give an overview of thetools and to keep them in the right place when on the move.

A choice4 suggested complete take away tool kits to suit most users. Caseavailable separately so that you can choose any combination of over100 different Teng Tools tool trays to make your own personal tool kit.

Take Away Tools

26 227

Hand To

ols

Tool Kits

Service case kit 1Fully portable tool kit supplied in a hard wearing flight case style carrying case complete with suspension wheels, retractable handle,key and combination lock. The kit includes 9 Teng Tools TC trays plusspace for additional tools. Included in the kit are 1/4”, 3/8” and 1/2”drive socket sets, combination spanners, pliers, screwdrivers, TX drivers and T handle hex keys.

SC01 €€750.00

Stock No PRICE


TT1217 17 piece 1/2” drive regular metric socket setTT1236 12 metric combination spannersTT440 4 piece Mega Bite plier set Stock no Description

TT917 7 piece Mega Drive screwdriver setTT917TX 7 piece Mega Drive TX/TPX screwdriver setTTHEX7 7 piece metric T Handle hex key set



TT3819 19 piece 3⁄8” drive regular metric socket setTT1205 5 1⁄2” drive socket accessory set

Service case kit 2Fully portable tool kit supplied in a hard wearing flight case style

carrying case complete with suspension wheels, retractable handle,key and combination lock. The kit includes 9 Teng Tools TC trays plus

space for additional tools. Included in the kit are ratchetting combination spanners, pliers, screwdrivers, crimping and

inspection tools and hex keys.

SC02 €€795.00

Stock No PRICE


TT440 4 piece Mega Bite plier setTTMI16 16 piece mini screwdriver, TX and plier setTTCP121 121 piece crimping tool set


TTTM03 3 piece inspection tool setTTNF12 12 piece needle file setTTDB28 28 piece drill bit set


TT6508R 8 piece ratchetting metric combination spanner set

TTHT28 28 piece MM/AF hex key and TX key setTTMD12D 12 piece double ended screwdriver set


228

Hand To

ols

Tool Kits


carrying case complete with suspension wheels, retractable handle,key and combination lock. The kit includes 9 Teng Tools TC trays plusspace for additional tools. Included in the kit are 1/4” drive socket set,

pliers, screwdrivers, TX/TPX screwdrivers, bits driver and bits, inspection tools and 1/4” and 3/8” drive socket bits set.

SC03 €€720.00


carrying case complete with suspension wheels, retractable handle,key and combination lock. The kit includes 9 Teng Tools TC trays plus

space for additional tools. Included in the kit are 1/4”, 3/8” and 1/2”drive socket sets, combination spanners, pliers, screwdrivers,

and a 6 piece general service kit.

SC04 €€720.00

Stock No PRICE


TT440 4 piece Mega Bite plier setTTMI16 16 piece mini screwdriver, TX and plier setTTMD12D 12 piece double ended screwdriver set


TT917 7 piece Mega Drive screwdriver setTT917TX 7 piece Mega Drive TX/TPX screwdriver setTTMD74 74 piece ratchetting bits driver set



TTBS35 35 piece 1⁄4” and 3⁄8” drive bit socket setTTTM03 3 piece inspection tool set

Stock No PRICE


TT1236 12 piece combination spanner setTT917 7 piece Mega Drive screwdriver setTT440-T 4 piece Mega Bite plier set


SCPS01 6 piece service tool set with ball pein hammer



TT3819 19 piece 3⁄8” drive regular metric socket setTT1218 17 piece 1⁄2” drive regular metric socket set


26 229

Tool Kits

Tool KitsPS tray set with measuring tape, cutting tools, adjustable, plier andhammer to fit in the service case (as shown in picture).

6 piece service tool set(570x265x56mm, 2.5 kilos)Measuring tape, hacksaw frame, utility knife, power grip plier, adjustable wrench, ball pein hammer.

SCPS01 €€105.90

TC816STACK 8 series stack system8 series tool box stack system using the TC806NF top box, TC803Nmiddle box and TCW807N roller cabinet.

TC816STACK €€1,025.00

Stock No PRICE

Stock No PRICE

The Teng Tools 8 series range of tool boxes has been developedto meet the high demands of quality conscious professional users all over the world. No detail has been ignoredin order to create top quality tool boxes and roller cabinets. Therange includes 5 top boxes, a middle box and seven differentroller cabinets and they can all be used with the Teng Tools toolstorage system with over 100 different tool trays.

• All top and middle box side handles are rubber dipped to give a more comfortable grip when carrying the box around

• All top boxes are supplied with a plastic tote tray with aluminium handle for less weight to carry around and no scratching, etc.

• All roller cabinets are fitted with a side handle for easier movement and the handles have a soft grip to make it more comfortable to use

• All Teng Tools tool boxes are made from heavy gauge, top quality steel for longer life and stability and are powder coat painted with a five step rust prevention and undercoat to prolong the life of the paint finish

• All Teng Tools roller cabinets are fitted with 5” heavy duty soft wheels to make them easier to move around. The wheels are on the corners with a U form wheel base for added strength and stability

• All drawers are fitted with a two step ball bearing slide system so that the drawers opensmoothly but also so that they fully extend so that access to the tools is much easier

• The construction method used gives a drawer capacity for top boxes and middle boxes of 20 kilos and 25 kilos for the roller cabinet drawers

• EVA mats included for all drawers to minimise scratching, etc.• Combination locks to give security without the need for keys.• All the drop front top boxes feature the Teng Tools eyes logo to make the

tool box more distinctive and eye catching• A full range of accessories including side tables and cabinets, drawer dividers

and parts trays.


8 Series Tool Boxes

Hand To

ols

230

Hand To

ols


Tool Storage

Weight Depth Height Capacity Drawer Body frame Weightthickness thickness

(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 305 380 0.7 0.8 21Drawer 1 572 270 50 20Drawer 2 572 270 50 20Drawer 3 572 270 50 20Drawer 4 572 270 75 20

TC805NFX 5 drawer 8 series deep drawer top box with ball bearing slides


(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 460 490 1.0 1.0 44Drawer 1 578 380 46 25Drawer 2 578 380 46 25Drawer 3 578 380 75 25Drawer 4 578 380 75 25Drawer 5 578 380 75 25

TC805NFX €€550.00


(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 305 380 0.7 0.8 22Drawer 1 172 270 50 20Drawer 2 172 270 50 20Drawer 3 172 270 50 20Drawer 4 572 270 50 20Drawer 5 572 270 50 20Drawer 6 572 270 75 20

TC806NF €€290.00

TC803NF 3 drawer 8 series top box with ball bearing slides


(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 305 380 0.7 0.8 22Drawer 1 572 270 75 20Drawer 2 572 270 75 20Drawer 3 572 270 75 20

TC803NF €€295.00

Stock No PRICE

TC804N 4 drawer 8 series top box with ball bearing slides

Stock No PRICE

TC804N €€290.00

Stock No PRICE

Stock No PRICE

TC806NF 6 drawer 8 series top box with ball bearing slides

26 231

Hand To

ols


Tool Storage

TC803N 3 drawer 8 series middle box with ball bearing slides


(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 305 250 0.7 0.8 13.8Drawer 1 572 270 50 20Drawer 2 572 270 50 20Drawer 3 572 270 75 20

TC803N €€185.00

TCW803N 3 drawer 8 series roller cabinet with ball bearing slides and lockable cabinet

Weight Depth Height Overall Capacity Drawer Body frame Weightheight thickness thickness

(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 670 460 656 770 1.0 1.2/1.0 43.4Drawer 1 575 380 75 25Drawer 2 575 380 75 25Drawer 3 575 380 150 30Base Storage 610 420 250

TCW803N €€520.00

TCW806N 6 drawer 8 series roller cabinet with ball bearing slides


(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 670 460 656 770 1.0 1.2/1.0 59Drawer 1 575 380 75 25Drawer 2 575 380 75 25Drawer 3 575 380 75 25Drawer 4 575 380 75 25Drawer 5 575 380 75 25Drawer 6 575 380 150 30

TCW806N €€595.00

Stock No PRICE

Stock No PRICE

Stock No PRICE



(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 670 460 813 950 1.0 1.2/1.0 64Drawer 1 575 380 75 25Drawer 2 575 380 75 25Drawer 3 575 380 75 25Drawer 4 575 380 75 25Drawer 5 575 380 75 25Drawer 6 575 380 150 30Drawer 7 575 380 150 30

TCW807N €€695.00

Stock No PRICE

232

Hand To

ols


Tool Storage



(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 670 460 813 950 1.0 1.2/1.0 61Drawer 1 575 380 75 25Drawer 2 575 380 75 25Drawer 3 575 380 75 25Drawer 4 575 380 75 25Drawer 5 575 380 75 25Drawer 6 575 380 75 25Drawer 7 575 380 75 25Drawer 8 575 380 150 30

TCW808N €€750.00


Weight Depth Height Overall Capacity Drawer Bodyframe Weightheight thickness thickness

(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 670 460 813 950 1.0 1.2/1.0 69Drawer 1 575 380 50 25Drawer 2 575 380 50 25Drawer 3 575 380 50 25Drawer 4 575 380 50 25Drawer 5 575 380 50 25Drawer 6 575 380 50 25Drawer 7 575 380 75 25Drawer 8 575 380 75 25Drawer 9 575 380 75 25Drawer 10 575 380 150 30

TCW810N €€750.00

Stock No PRICE

Stock No PRICE

TCW806LN 53” wide 6 drawer 8 series roller cabinet with ball bearing slides

and a wooden top plate.


(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 1350 460 767 937 1.0 1.2 121Drawer 1 1216 380 65 40Drawer 2 1216 380 65 40Drawer 3 1216 380 65 40Drawer 4 1216 380 100 50Drawer 5 1216 380 154 60Drawer 6 1216 380 154 60

TCW806LN €€1,750.00

Stock No PRICE

26 233

Hand To

ols


Tool Storage

TCW809N 53” wide 9 drawer 8 series roller cabinetwith ball bearing slides and a wooden top plate.

TCW809N €€1,850.00

Wooden plateReplacement wooden plate for roller cabinets TCW806LN and TCW809N. (1342x450x37mm)

TC-TB01 €€215.00

Stock No PRICE

Stock No PRICE

TC703 3 drawer middle box with ball bearing slides

Width Depth Height Capacity Drawer Body frame Weightthickness thickness

(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 305 250 0.7 0.8 13.8Drawer 1 572 270 50 20Drawer 2 572 270 50 20Drawer 3 572 270 75 20

TC703 €€210.00

TC706F 6 drawer 7 series top box with ball bearing slides

Width Depth Height Overall Drawer Body frame Weightheight thickness thickness

(mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 660 305 380 0.7 0.8 24Drawer 1 172 270 50 20Drawer 2 172 270 50 20Drawer 3 172 270 50 20Drawer 4 572 270 50 20Drawer 5 572 270 50 20Drawer 6 572 270 75 20

TC706F €€290.00

Stock No PRICE


(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 1350 460 767 937 1.0 1.2 136Drawer 1 1216 380 65 40Drawer 2 575 380 75 25Drawer 3 575 380 75 25Drawer 4 575 380 75 25Drawer 5 575 380 150 25Drawer 6 575 380 75 25Drawer 7 575 380 75 25Drawer 8 575 380 150 25Drawer 9 575 380 150 25

Stock No PRICE

234

Hand To

ols


Tool Storage

14” barn style tool boxA professional quality 14” barn style tool box with portable tote tray,

padlock facility, full length piano style hinges and turned edges for added safety. (355x205x180mm, 3.2 kilos)

TC414 €€36.10

19” barn style tool boxA professional quality 19” barn style tool box with portable tote tray,padlock facility, full length piano style hinges and turned edges for

added safety.(480x205x180mm, 4.1 kilos)

TC419 €€44.40

TCW707 7 drawer 7 series roller cabinet with ball bearing slides

Width Depth Height Overall Capacity Drawer Body frame Weightheight thickness thickness

(mm) (mm) (mm) (mm) (kilos) (mm) (mm) (kilos)Overall 670 460 813 950 1.0 1.0/1.2 64Drawer 1 575 380 75 25Drawer 2 575 380 75 25Drawer 3 575 380 75 25Drawer 4 575 380 75 25Drawer 5 575 380 75 25Drawer 6 575 380 150 30Drawer 7 575 380 150 30

TCW707 €€720.00

Stock No PRICE

Stock No PRICE

Stock No PRICE

22” 5 drawer cantilever tool boxA professional quality 22” cantilever style tool box with 5 individualcompartments with padlock facility, full length piano hinges andturned edges for added safety. Also available as a complete kit

including a wide selection of general mechanics hand tools.(560x205x205mm, 7.0 kilos)

TC422 €€55.60

Stock No PRICE

Mega Rosso Barn Style Tool BoxMega Rosso lockable barn style tool box supplied complete with

base mat, tote tray, rubber feet, 2 removable aluminium clip rails, 301/4” drive socket clips, 30 3/8” drive socket clips and 30 1/2” drivesocket clips. Also available as a complete kit, including 1/4”, 3/8”and 1/2” drive sockets, accessories and combination spanners,

pliers and screwdrivers. (450x200x200mm, 5.5 kilos)

TC450 €€103.20

Stock No PRICE

26 235

Hand To

ols


Tool Storage

Takeaway ToolsService case for use with up to 9 TC trays, or up to 6 tool traysplus the SCPS01 set of general purpose tools. Heavy duty aluminium frame with ABS case, a stainless steel telescopichandle, spring suspension and rubber wheels for a smoothride, non slip rubber feet, with combination lock and keylock.Also available as complete kits with several options to choosefrom.(500x400x240mm, 7.35 kilos).

TC-SC €€310.00

Carrying caseEmpty carrying case for use with 3 TC trays. Click lock and foldinghandle. The underside of the case is fitted with rubber feet to prevent it from sliding. (470x320x65mm, 1.4 kilos)

TC-3 €€27.00

Stock No PRICE

Stock No PRICE

Plastic tote trayDesigned for use in Teng Tools top boxes. Lightweight tote tray forcarrying tools away from the tool box. Manufactured in plastic withan aluminum carrying handle, rubber mat and rubber feet to prevent sliding and scratching. (202x476x80mm, 0.5 kilos)

TCA05 €€22.60

Stock No PRICE

Aluminium sections for mounting on the wall or in atool box for use with clips for 1/4”, 3/8” or 1/2” sockets.33 piece 450mm four track clip rail tray complete with carrying handle and 10 each of the 1/4”, 3/8” and 1/2” drive socket clips

ALU450 €€24.00

Stock No PRICE

Aluminium sections for mounting on the wall or in a tool box for use with seperate clips 1/4”, 3/8”, 1/2” sockets.

SSttoocckk PPrriicceeNNoo..

ALU430 430mm single track socket rail €€7.10ALU1000-1 1 metre single track socket rail €€8.10ALU1000-4 1 metre four track socket rail €€22.20

(tools not included)

236

Hand To

ols


Tool Storage

Magnetic Tool rail6 individual magnets each with a capacity of 450 grams combined

in a rail especially designed for fixing to Teng Tools roller cabinets,also suitable for wall mounting or other tool boxes. Ideal for hanging

up tools while working. (457x52x17mm, 0.6 kilos)

TC-MAG €€28.50

4 piece black divider set for top and middle box drawers.Sizes: 570x40x3mm 2 pieces, 272x40x3mm 2 pieces.

TCDIVS €€9.10

Separate socket clips.

SSttoocckk nnoo.. DDeessccrriippttiioonn PPrriiccee

ALU14 10 x 1/4” drive socket clips €€5.00ALU38 10 x 3/8” drive socket clips €€5.00ALU12 10 x 1/2” drive socket clips €€5.00

Stock No PRICE

Stock No PRICE

4 piece black divider set for roller cabinet drawers (also fits TC805NFX deep drawer top box).

Sizes: 570x40x3mm 2 pieces, 375x40x3mm 2 pieces.

TCDIVL €€9.10

ABS top for roller cabinetsABS tray designed to fit the top work surface of any Teng Tools rollercabinet. Individual parts areas plus positioning for a middle box or

top box give a very organised work area and the ABS material protects the top of the roller cabinet from light scratches.

ABS-TOP €€24.20

Stock No PRICE

Stock No PRICE

Non slip tool matRubber mat for placing in tool boxes, on a roller cabinet, a work top

or in tool box drawers, etc. Resistant to oil and grease. Cut to requiredformat. Supplied in 2 meter rolls measuring 45cm and 23mm thick.

TC-MAT €€13.90

Stock No PRICE

26 237

Hand To

ols


Tool Storage

Roller cabinet side plateEspecially produced roller cabinet side plate measuring 460x640mm tosuit Teng Tools 7 and 8 series roller cabinets. A support leg and carrying handle are built in enabling the side plate to be used as aportable or stand alone tool rack. (fully patent and design protected).

TCW-SP €€65.00

Stock No PRICE

Hooks for roller cabinet side plate system, tool cabinet and work bench range.

SSttoocckk nnoo.. DDeessccrriippttiioonn PPrriiccee

TCW-HK10 7 x 90°, 3 x 45° hooks €€16.50TCW-HK02 10 double hooks €€16.50TCW-HK20 4 x 45° single, 4 x 45° double hooks, 4 x 90° single,

4 small and 4 large spring clips €€34.00TCW-HK45 10 45° hooks for TCW-SP side plate €€16.50TCW-HK90 10 90° hooks for TCW-SP side plate €€16.50TCW-HKAIR 10 air tool hooks for TCW-SP side plate €€16.50TCW-HKS 10 small spring clip hooks €€23.30TCW-HKB 10 large spring clip hooks €€21.50

Brackets for middle boxesThis set of brackets is used to secure a middle box to a roller cabinetand prevent it from tipping when moving from one location to another.

TCF01 €€7.80

Stock No PRICE

Brackets for top boxesThis set of brackets is used to secure a top box to a roller cabinet andprevent it from tipping when moving from one location to another.

TCF02 €€7.80

Stock No PRICE

Side handlesPair of plastic coated side handles to give a more comfortable gripwhen carrying or lifting top boxes or middle boxes.

TCDSH €€15.00

Stock No PRICE

Rubber handlesRubber foam handles especially designed to give a more

comfortable grip on roller cabinet side handles.Size 440x80x90mm.

Stock No PRICE

238

Hand To

ols


Tool Storage

Side cupboardA lockable side cabinet with fixing points for fitting to the side

of Teng Tools roller cabinets (fittings included). Ideal for storingaerosols, and bulkier items. Fitted shelf included.

External dimensions 400x200x500mm, overall weight 6.5 kilos.

TCW-CAB €€107.90

TCRFH €€35.00

Bumper setRoller cabinet bumper set. A set of self adhesive vinyl bumper strips

to protect the base of a roller cabinet when moved.

TCBP €€72.90

Set of castorsSet of 4 5”x2” needle bearing castors finished in black with 2 step

brakes for extra strength and smoother operation.

TCNBC €€175.00

Stock No PRICE

Stock No PRICE

Stock No PRICE

Top box coverTool box cover for 3, 4 and 6 drawer top boxes.

TC-COVER €€18.00

Stock No PRICE

26 239

Hand To

ols


Tool Storage

Tool box coverTool box cover for tool kits and stack systems using the Teng Tools topbox middle box and 7, 8 or 10 drawer roller cabinets.

TC-COVER1 €€45.30

Roller cabinet coverTool box cover for the Teng Tools roller cabinets

TC-WC02 €€27.40

Magnetic Tray holdersThe shelves can be fitted to a roller cabinet, middle or top box with help of3 rubber protected magnets,can also be used on work bench panels.

Stock no. 580C 580DSize mm 310x115x31 210x115x31

580C €€43.80580D €€36.90

Stock No PRICE

Stock No PRICE

Stock No PRICE

Magnetic tray holderOpen shelf suitable for general use or for holding up to 4 aerosolcans or bottles. With four strong, rubber protected magnets for fixingto, for example, the side of a roller cabinet.

580J €€49.90

Sidetable and paper roll holderSide Table and Paper roll holder. Made to fit on the side of all TengTools Roller Cabinets (paper not included). Size 370x370mm, maximum width of paer roll 360mm.

TCA01 €€97.20

Stock No PRICE

Stock No PRICE

240

Hand To

ols

Tool Storage

Three lock setA set of three locks with one set of keys, ideal for Mega Master tool kits

or TC816STACK systems for owners who want one key to fit all boxes.

TC-LOCK3 €€25.00

Five lock setA set of five locks with one set of keys, ideal for stack system owners

who want one key to fit all boxes. Includes 3 regular locks and 2locks with bar fittings together with one pair of keys which allows

conversion of all standard stack systems. Full details of which locktype fit which tool box or cabinet are shown below.

TC-LOCK5 €€34.10

Locks for Tool boxes4 different type locks for different tool boxes and cabinets. See the

table below for more information.

TCDRK €€8.20TCPRK €€7.20TCWPRK €€8.20

Combination locks for Tool boxesIn 2009 Teng Tools changed the design of the 8 series tool boxes to

incorporate combination locks rather than key locks. These locks arealso available as spare parts but cannot be retro fitted to replace

key locks as the fixing position and mechanism is different. The tablebelow shows which replacement lock is required for each of the 8

series tool boxes and roller cabinets.

TC-90CLOCK1 €€17.90TC-90CLOCK2 €€17.90TC-180CLOCK €€18.90

Stock No PRICE

Stock No PRICE

Stock No PRICE

Stock No PRICE

TC803NF 3 drawer top box TC-90CLOCK2TC804N 4 drawer top box TC-90CLOCK1TC805NFX 5 drawer top box TC-90CLOCK2TC806NF 6 drawer top box TC-90CLOCK2TC803N 3 drawer middle box TC-180CLOCKTCW803N 3 drawer roller cabinet TC-180CLOCKTCW806N 6 drawer roller cabinet TC-180CLOCTCW807N 7 drawer roller cabinet TC-180CLOCKTCW808N 8 drawer roller cabinet TC-180CLOCKTCW810N 10 drawer roller cabinet TC-180CLOCKTCW806LN 6 drawer double width roller cabinet TC-180CLOCKTCW809LN 9 drawer double width roller cabinet TC-180CLOCK


Tool boxC706F Description Regular Bar typelock lock

TC706F 6 drawer top box TCPRKTC703 3 drawer middle box TCDRKTCW707 7 drawer roller cabinet TCDRKTC804NS 4 drawer top box TCPRKTC803NS 3 drawer middle box TCDRKTCW806NS 6 drawer roller cabinet TCDRKTC803NF 3 drawer top box TCPRKTC804N 4 drawer top box TCPRKTC805NFX 5 drawer top box TCPRKTC806NF 6 drawer top box TCPRKTC803N 3 drawer middle box TCDRKTCW803N 3 drawer roller cabinet TCWPRKTCW806N 6 drawer roller cabinet TCDRKTCW807N 7 drawer roller cabinet TCDRKTCW808N 8 drawer roller cabinet TCDRKTCW810N 10 drawer roller cabinet TCDRKTCW806LN 6 drawer double width roller cabinet TCDRKTCW809LN 9 drawer double width roller cabinet TCDRKTCW-CAB Side Cupboard TCPRK

Tool boxC706F Description Regular Bar typelock lock

Combination locks Key type locks

CLICK& FILL

The concept that lets you design and build up your tool kit how and when you want

Aside from making some of the world's greatest tools, our tool sets offer you an entire system to help maintain order in your workshop. The Teng

Tools Control System is about each tool having itsown place. Instead of drawing an outline around

each tool as in the old days, each tool compartmentacts as an organising system by snapping together

to fit snugly in your box drawers. No space is wastedand with each tool stored snugly away in its place,it's much easier to identify tools that are missing atthe end of each day. To experience the benefits of

better organisation through our Tool Control System,design your own tool cabinet with our Click & Fill

interactive program which can be found at: www.megamaster.co.uk

Documents

Tool Kits - Bell Scott Engineering Suppliers