Tom Donaghe
Tom DonagheConstruction Consultant /Chief Inspector /Journeyman
Welder
31 Medicine Lodge Road Gillette, WY. 82718307-257-0246307-
670-2465 [email protected]
Experience Summary:
Over 30 years experience, welding and inspection in the oil/gas
pipeline industry. Knowledgeable in all aspects of compressor,
plant and pipeline construction.
OSHACompetent person, ExcavationCompetent person, Confined
spaceLock out/Tag outHot workStorm water prevention
f. Adult/child first aid g. Environmental emergencies h.
Adult/child CPRInfant CPR
H2s certified
Safe Gulf/Safe land USA (PEC100063051)T.R.A.P (terror response
action procedure)Basic oilfield orientation
HAZCOM Anadarko Company Certified Welding Inspector
Certified welder with multiple companies (Heli-arc and
Sub-arc)
Career highlights include:
Wood Group PAC / Project Lead Conoco Phillips / Eagle Ford
field, Kennedy Texas / February 2013 to present.
Contact John Bednorz @ 1- 832-409-8907
Project - Gathering system numerous pipelines ranging from 4 to
8 in diameter and from five hundred feet to five miles in
length.
Responsibilities Represent Conoco Phillips and their best
interest on location. Ensure Conoco Phillips safety and quality
specifications are held to the highest standards. Coordinate with
engineering, project management, NDT and contractors. Maintain
daily and weekly reports along with all project
documentation.Assume responsibility for all aspects of construction
on the project.
McDaniel Technical Services / Chief inspector Phillips 66 /
Murray ID/ Lodge Grass MT/ Sheridan WY. /August 2012 to February
2013
Contact Josh Jansuek @ 1-918-294-3565
Project - 8.500 wall Horizontal Directional Drill (HDD)
12,885ft, Lodge Grass Mt. 10 Block valve fabrication and
installation Murray ID.
Responsibilities Represent Phillips 66 and their best interest
on location. Ensure Phillips 66 safety and quality specifications
are held to the highest standards, Coordinate with engineering,
project manager, inspectors and the contractors. Delegate
responsibilities to inspectors on location; maintain daily, weekly
and monthly reports along with project documentation. Assume
responsibility for all aspects of construction on the project.
McDaniel Technical Services / Senior welding inspector / Midwest
WY / Gillette WY. / Vernal Utah. / Anadarko Petroleum Corporation/
Compressor station and pipeline construction. October 2007 to July
2012.
Contact Josh Jansuek @ 1-918-294-3565
Project - Gathering system numerous pipelines ranging from 2 to
24 in diameter and from five hundred feet to thirty miles in
length. Set and tied in thirty-nine 1400HP screw compressors to
date.
Responsibilities Represent Anadarko Petroleum Corporation and
their best interest on location.
Pipeline responsibilities Safety, test welders, clearing and
grading right of way, stringing, bending, welding inspection
stainless steel and carbon steel fabrication, front end, firing
line and tie in, as built tie in and right of way reroute, coating,
ditching, lowering in, back fill, final clean up, installation of
line markers and cathotic test stations, air, and hydrostatic test,
maintain daily progress reports and coordinate with multiple
contractors and NDT.
Compression responsibilities Safety, site location, site and pad
construction, concrete and steel pipe supports, receive and set
multiple 1400 HP Toromont screw compressors, welding inspection,
stainless steel, carbon steel pipe fabrication, supports, bolt up,
paint, blow down existing stations, tie in and purge additional
units, coordinate with Anadarko operations, contractors and NDT.
NLW Consulting / Williston ND. Construction Consultant / Hess
Cooperation /Fabrication and pipeline construction/ July 2007 to
October 2007.
Contact Nicky Wilson @ 1-682-558-1061
Project - Gathering system numerous 6 steel 4 polly, 3 fiber
spar ranging from two to four miles in length.
Responsibilities Represent Hess Cooperation and their best
interest on location. Safey, take measurements, draw isometrics,
steak right of way, welding inspection, clearing and grading right
of way, stringing, bending, welding inspection fabrication, front
end, firing line and tie in, coating, ditching, lowering in, back
fill, final clean up, line markers, cathotic test stations,
hydrostatic test, coordinate with Hess operations, contractors and
NDT maintain daily progress reports.
Gulf Interstate/Houston TX Chief Inspector for Energy Transfer
Company Dallas TX. /Compressor Station and pipeline / December 2006
to June 2007
Contact - Gulf Interstate @ 1-713-850-3500
Project - 12, 10, 6 and 4 steel pipelines through residential
areas ranging from two to twelve miles. Set and tied in 2000HP
reciprocating compressor.
Responsibilities Represent ETC and their best interest on
location. Coordinate with inspectors, contractors and NDT on a
daily basis, take measurements draw isometrics, red line drawings,
keep job notebook and daily progress reports, insure safety and
overall integrity of main line construction and compressor
fabrication.
Universal Ensco, Inc. / Houston TX. Fabrication inspector /
Pipeline / Puget Sound Energy September November 2006
Contact Red Peeples @ 1- 970 640 8482
Project -12 pipeline twenty-two miles through residential areas
and cross country. Responsibilities Represent Puget Sound Energy
and their best interest on location, safety, welding inspection
over fabrication and tie in, red line drawings, maintain daily
progress reports, ditching, coating, NDT and back fill.
Donaghe Welding Services, Gillette WY. Welding services /
November 2005 September 2006 Responsibilities Shop fabrication and
miscellanies welding.
Contact - Tom Donaghe @ 1-307-670-2465 Yates Petroleum /
Gillette WY Material receiving and reconciliation / October 2005
November 2005 Responsibilities Receive, store, ship and document
pipe, fittings and valves.
Contact - Saunda Phillips @ 1-307-680-8187
QIS Inspection Services / Salt Lake City Utah Welding Inspector
/ Northwest Pipeline / June 2003 August 2003
Contact QIS @ 1-405-604-9500
Project -36 pipeline twenty miles.
Responsibilities Represent North WEST PIPELINE and their best
interest on LOCATION, SAFETY, welding inspection with tie in CREW,
COATING, DITCHING, padding and back FILL, NDT AND hydrostatic
testing.
QIS Inspection Services Salt Lake City Utah Utility Inspector /
Williams / October December 2002 Contact QIS @ 1-405-604-9500
Project - Kern River Project Red Rock Canyon Las Vegas Nevada.
Responsibilities Represent Williams Gas and their best interest on
location, safety, and vegetation relocate prior to clearing right
of way through national forest.Maintain daily progress reports;
coordinate with contractor and Government environmental inspector.
Sterling Construction Gillette WY. Welder pipeline and fabrication
/ November December 2001
Smith Pipeline and Construction Gillette WY. Welder Pipeline and
fabrication / August November 2001
Sterling Construction Gillette WY. Welder Pipeline and
fabrication / September 2000 August 2001
Hettinger Construction Gillette WY. Welder pipe fabrication /
August September 2000
Detailed work history is available on request.
References:
Bruce Yates - (Conoco Phillips area supervisor Kennedy Texas)
830-400-9136
Nicky L Wilson (Anadarko, Chief inspector Carlsbad NM.)
682-558-1061
Red Peebles (PSE Chief Inspector Clay Elam WS) 970-640-8482
Gary Goins (Anadarko construction manager Gillette WY)
307-670-6055
