Upload
duongliem
View
224
Download
8
Embed Size (px)
Citation preview
TOOLSTO
531 532
TO
RIGHT ANGLE GRINDER RIGHT ANGLE GRINDER
01Right angle grinderDiameter 125 mm, with restart protection
� Item no. 8200-362-313
� Product descriptionScope of delivery:1 x angle grinder1 x protective guard1 x auxiliary handle Vibration Control1 x backing flange1 x locking nut1 x two-hole spanner
Power input: 1,100 WNo-load speed: 11,000 rpmPower output: 660 WGrinding spindle thread: M14 Disc diameter: 125 mmRubber grinding plate diameter: 125 mmWire cup brush diameter: 75 mmLength: 286 mmHeight: 106 mmWeight: 2.0 kg
02Right angle grinderØ 180 mm
� Item no. 8200-510-219
� Product descriptionScope of delivery:1 x angle grinder1 x adjustable protective guard1 x backing flange1 x locking nut1 x two-hole spanner1 x auxiliary handle Vibration Control
Technical data:Input: 2,200 WNo-load speed: 8,500 rpmGrinding spindle thread: M14 Main handle: Stalk Disc diameter: 180 mmWeight: 5.3 kg
01
- With restart protection - With kick back stop: detects blockage of the disc – switches the tool off immediately
- Powerful 1100 W Champion motor with restart protection
- Twist-proof and easy-to-adjust protective guard – reliably protects the user
- Vibration reduced by up to 40% due to Vibration Control auxiliary handle, for fatigue-free work (EN 60745)
- Direct cooling for high overload capability and long service life
- Constant electronic for constant workload speed
- Overload protection, soft start-up and inrush current limiting
- Optimum handling due to slender design - Gear head can be rotated in 90°steps - Handle can be used on right or left
- Powerful 2200 W Champion motor and stalk handle
- Low weight for optimum handling - Vibration reduced by up to 50% due to Vibration Control main and auxiliary handle, for fatigue-free work (EN 60745)
- Kick-back stop: detects blockage of the disc – switches the machine off immediately
- Restart protection prevents the tool from auto-matically restarting after a power cut
- Inrush current limiting and soft start-up - Twist-proof and easy-to-adjust protective guard – reliably protects the user if the grinding disc breaks
- Soft grip for comfortable handling of the machine
- Armoured coils that protect the motor against sharp grinding dust and ensure a long service life
02
533 534
TO
ELECTRIC DRILL WINDSCREEN REMOVAL
01Electric drill
� Item no. 8200-485-968
� Product descriptionScope of delivery:1 x electric drill1 x quick-release chuck 1 - 10 mm
Technical data:Input: 600 WNo-load speed: 0 – 2,600 rpmOutput: 360 WWeight: 1.7 kgSpeed: 1,676 rpmTorque: 20.0 Nm
Drill diameter: Drill diameter in aluminium: 10 mmDrill diameter in wood: 25 mmDrill diameter in steel: 10 mm
01
- Powerful 600 W motor, ideal for drilling up to 10 mm holes in metal
- Drill spindle fixed in bearing for high precision work
- Compact design and low weight ensure easier handling for medium-duty use
- Control electronics for exact pilot drilling - Metal quick-release chuck for high precision work and longevity
- Forward/Reverse rotation - Particularly suitable for drilling up to 10 mm holes in steel
- Integrate switch for continuous operation - Belt clip
02Windscreen cutter
� Item no. 8697-5
� Product descriptionPowerful system for the removal of bonded front, rear and side windows fitted to motor vehicles.Easy removal without damaging the glass or bo-dywork. Suitable for clearing any remaining glass and adhesive residue.
Scope of delivery:- 1 x windscreen cutter Super Cut FSC 1.6 automotive- 1 x plastic tool case- 1 x whetstone (art no.:8697-5-1)- 1 x key (art no.: 8697-600)- 1 x mounting bolt
Technical data:- Input: 400 W- Output: 220 W- Oscillations: 11,000-18,500 rpm- Cable with plug: 5 m- Weight: 1.25 kg
- Ideal for windscreen specialists, vehicle repair workshops
- Fast, safe and easy-to-hand system - Powerful 400 W motor for high cutting speeds - Stepless electronic cutting frequency - Hex tool holder with friction-locked connection between the machine and tool
Spare grindstone � Item no. 8697-5-1
02
03Round saw blades
� Product description
- For additional application of the special cutter when sawing sheet metal and GRP as well as cutting scrap bridges (bodywork saw)
Item no. Ø mm Sales unit
8697-580-2 63 1
8697-581-2 80 1
03
535 536
TO
BATTERY POWERED TOOLS
02Cordless cartridge gunfor cartridges and bagged goods
� Item no. 8715-999-106
� Item no. 8715-999-107 � Lithium-ion spare rechargeable battery
� Product description
Scope of delivery: 1 x cordless cartridge gun 1 x 10.8 V li-ion battery pack 1 x quick charger
- Battery voltage: 10.8 V - Lithium-ion technology - Charge time: Approx. 1 hour - Suitable for: 310 ml cartridge and 400 ml bag
02
01Cordless drill
� Item no. 8200-477-529
� Product descriptionScope of delivery:1 x cordless drill2 x 3.0 Ah li-ion battery pack1 x quick charger
Technical data:Max. torque (hard drilling applications): 75 NmMax. torque (soft drilling applications): 34 NmNo-load speed (1st speed/2nd speed): 0 – 380/1,600 rpmMin./Max. chuck range: 1.5/13 mmDrill spindle thread: 1/2“ Battery voltage: 14.4 VWeight incl. battery: 2 kgTorque settings: 25+1 Drill diameter: Max. drill diameter in wood: 45 mmMax. drill diameter in steel: 13 mmScrew diameter: Max. screw diameter: 10 mm
BATTERY POWERED TOOLS
- 400% longer service live - Overload protection - Progressive increasing torque - Ergonomic handle design with softgrip zone for a better and more comfor-table hold
- Quick battery charging, charged 75% after half the charge time - No memory effect: Charging possible irrespective of charge level - Multi-speed - Forward/Reverse rotation - Auto lock - Work light
01
537 538
TO
HAND TOOLSPOWER TOOLS
01REPOLED display, electronically regulated blower with infinitely variable air quantity and temperature control
� Item no. 8697-000-991
� Product description
- Double overheating protection: thermostat and thermal fuse - Air inlet with grid to prevent excess contamination - Soft handle and soft foot for secure positioning - Adjustable - Stepless speed and temperature control - Individual adjustment of the four programs possible
Power Temperature Ventilation System Weight W °C Performance L/MIN g
2.300 Level 1: 50° 150-250 940
Level 2: 50 - 650° C 150-500 01
02Hot melt gunElectronically controlled
� Item no. 8714-607-1
� Product descriptionElectronically controlled hot glue gun with high melting capacity.
Technical data:Dimensions (LxWxH): 185 x 30 x 160 mmWeight: 320 gOutput: Warm-up approx. 200 W Idle approx. 16 W In use approx. 45 WMains voltage: 100 – 240 VWarm-up time: 7 minutesGlue stick diameter: 11 mmMelt temperature: 206°CDelivery rate: approx. 16 g/min
Changeable nozzleAdhesive joint can be fully loaded after just 2 minutes
02
� 03 / Item no. 8714-611-7 �Glue stick set, black � Packing unit: 5
� 04 / Item no. 8714-611-8 �Glue stick set, beige �Unit: 6
� 05 / Item no. 8714-611-9 �Glue stick set, blue �Unit: 6
03
04
05
06Blind rivet nut pliers MAVRO
� Item no. 8948-800
� Product descriptionEquipment and accessories:- Mandrels + nuts M6, M8, M10, M12
Work range: up to diameter of 12 mm
- Weight: 1.1 kg- Total length: 210 mmHand tool for setting blind rivet nutsQuick-change system for mandrels and sleeves - For aluminium/steel/stainless steel M6 and M12 blind rivet nuts
06
07Mandrel and nut for blind rivet nut pliers 8948-800
� Item no. 8948-800-14 �M4
� Item no. 8948-800-15 �M5
� Item no. 8948-800-16 �M6
� Item no. 8948-800-18 �M8
� Item no. 8948-800-110 �M10
� Item no. 8948-800-112 �M12 07
08Light pressure hand gunFor processing up to 400 ml sealant cartridges and bags
� Item no. 2891-04
� Product description
- Robust metal locking ring with bayonet fitting - No jamming of the push rod due to reinforced push plate - For plastic bags and cartridges
08Item no. Colour Tensile strength in %
8714-611-7 black 70%
8714-611-8 beige 30%
8714-611-9 blue 100%
539 540
TO
HAND TOOLSHAND TOOLS
01Water pump pliers setCobra
� Item no. 8714-02-08
� Product descriptionSet contents:1 x water pump pliers180 mm (8714-02-05)1 x water pump pliers 250 mm (8714-02-06)1 x water pump pliers 400 mm (8714-02-07)
- Self-locking on pipes and nuts: No slipping on the workpiece, low hand force required
- Box-joint design: high stability due to double guide
- Guard prevents fingers being pinched - Chrome vanadium, forged, oil-hardened
Item no. Length Tube Ø Width across flats
8714-02-05 180 mm 1 ¼“ up to 30 mm
8714-02-06 250 mm 2“ up to 46 mm
8714-02-07 400 mm 3 ½“ up to 95 mm
8714-02-09 560 mm 4 ½“ up to 120 mm
- 30% extra gripping capacity - User-friendly handle position due to opti-mised fine adjustment
- High load capacity thanks to slim design
01
02Handsaw bladeHSS bi-metal, single-cutting edge
� Item no. 4601-300-13
� Product description
- Wear-proof, unbreakable, with excellent cutting edge retention - Recommended for all materials
03Handsaw bladeHSS bi-metal, double-cutting edge
� Item no. 4601-300-25
� Product description
- Wear-proof, unbreakable, with excellent cutting edge retention - Recommended for all materials
Length mm Width mm Height TEETH TO 1“ mm
300 13 0,6 24
Length mm Width mm Height TEETH TO 1“ mm
300 25 0,8 22
02 03
04Thread cutting unitFor metric thread in accordance with DIN 13, 44 parts
� Item no. 8639-02
Contents:
1 set each consisting of 3 hand taps DIN 352, HSSG M3, M4, M5, M6, M8, M10, M12
x 1 die DIN 223, HSS M3, M4, M5, M6, M8, M10, M12
x 1 adjustable tap wrench DIN 1814 size 1 and 2
x 1 die holder DIN 225 20 x 5 mm, 20 x 7 mm, 25 x 9 mm, 30 x 11 mm, 38 x 14 mmx 1 core hole spiral bit DIN 338, HSS 2.5 mm, 3.3 mm, 4.2 mm, 5.0 mm, 6.8 mm, 8.5 mm, 10.2 mm
x 1 screwdriver and thread gauge
04
05Tap wrench adjustableDIN 1814, for hand taps with square ends in accordance with DIN10 and ISO/R237
Item no. For thread For square-end Length mm
8657-1 M1 - 10 2,1 - 5,5 180
8657-2 M4 - 12 3,8 - 7,0 280
8657-3 M5 - 20 4,9 - 12,0 390
05
06Tool holder with ratchetLong version, for hand taps for right and left-hand threads
07Tool holder with ratchetShort version, for hand taps for right and left-hand threads
Item no. For thread For square-end Length mm
8715-42-03 M3 - 8 2,4 - 4,9 250
8715-42-04 M8 - 12 4,9 - 7,0 300
Item no. For thread For square-end Length mm
8715-42-01 M3 - 8 2,4 - 4,9 85
8715-42-02 M8 - 12 4,9 - 7,0 100
06
07
+ 3
0 %
541 542
TO
HAND TOOLSHAND TOOLS
01Hand tap setsDIN 352 HSS, ISO metric standard thread, taper tap, second tap, bottom tap
07Hand tap setsDIN 2181 HSS, ISO metric fine thread, taper tap, bottom tap
05Fine-pitch thread taper tapDIN 2181 HSS
06Fine-pitch thread bottoming tapDIN 2181 HSS
03Second tapDIN 352 HSS
04Bottoming tapDIN 352 HSS
02Taper tapDIN 352 HSS
Item no. Thread
8639-4 M4
8639-5 M5
8639-6 M6
8639-8 M8
8639-10 M10
8639-14 M14
8639-16 M16
8639-18 M18
8639-20 M20
Item no. Thread
8641-8-1 M8 x 1,00
8641-10-1 M10 x 1,00
8641-10-125 M10 x 1,25
8641-12-125 M12 x 1,25
8641-12-15 M12 x 1,50
Item no. Thread
8641-14-125 M14 x 1,25
8641-14-15 M14 x 1,50
8641-16-15 M16 x 1,50
8641-18-15 M18 x 1,50
Item no. Thread
8642-118-15 M18 x 1,50
8642-120-15 M20 x 1,50
8642-122-15 M22 x 1,50
8642-124-15 M24 x 1,50
Item no. Thread
8642-310-1 M10 x 1,00
8642-310-125 M10 x 1,25
8642-312-125 M12 x 1,25
8642-312-15 M12 x 1,50
8642-314-125 M14 x 1,25
8642-314-15 M14 x 1,50
Item no. Thread
8640-2-5 M5
8640-2-6 M6
8640-2-8 M8
8640-2-10 M10
8640-2-18 M18
8640-2-20 M20
8640-2-22 M22
8640-2-24 M24
Item no. Thread
8640-3-4 M4
8640-3-5 M5
8640-3-6 M6
8640-3-8 M8
8640-3-10 M10
8640-3-12 M12
8640-3-16 M16
8640-3-20 M20
8640-3-22 M22
Item no. Thread
8640-1-6 M6
8640-1-7 M7
8640-1-8 M8
8640-1-10 M10
8640-1-20 M20
8640-1-22 M22
8640-1-24 M24
01 02
03 04
Thread specifications descriptionDIN 352 HSS, for ISO metric standard thread
Thread specifications descriptionDIN 2181 HSS, for ISO metric fine thread
Thread Pitch Core hole L Thread- Shank square-end ø ø length ø mm mm mm mm mm
M4 0.70 3.3 45 14 4.5 3.4 M5 0.80 4.2 48 16 6.0 4.9 M6 1.00 5.0 50 19 6.0 4.9 M7 1.00 6.0 50 19 6.0 4.9 M8 1.25 6.8 56 22 6.0 4.9M10 1.50 8.5 70 24 7.0 5.5M12 1.75 10.2 75 29 9.0 7.0M14 2.00 12.0 80 30 11.0 9.0M16 2.00 14.0 80 32 12.0 9.0M18 2.50 15.5 95 40 14.0 11.0M20 2.50 17.5 95 40 16.0 12.0M22 2.50 19.5 100 40 18.0 14.5M24 3.00 21.0 110 50 18.0 14.5
Thread Pitch Core hole L Thread- Shank square-end ø ø length ø mm mm mm mm mm
M4 0.70 3.3 45 14 4.5 3.4 M5 0.80 4.2 48 16 6.0 4.9 M6 1.00 5.0 50 19 6.0 4.9 M7 1.00 6.0 50 19 6.0 4.9 M8 1.25 6.8 56 22 6.0 4.9M10 1.50 8.5 70 24 7.0 5.5M12 1.75 10.2 75 29 9.0 7.0M14 2.00 12.0 80 30 11.0 9.0M16 2.00 14.0 80 32 12.0 9.0M18 2.50 15.5 95 40 14.0 11.0M20 2.50 17.5 95 40 16.0 12.0M22 2.50 19.5 100 40 18.0 14.5M24 3.00 21.0 110 50 18.0 14.5
07
05 06
543 544
TO
HAND TOOLS
01Die nutDIN 223 HSS, for ISO metric standard thread in accordance with DIN 13, type B (closed, pre-slotted)
03Die holderDIN 225 for direct mounting of dies
02Die nutDIN 223 HSS, for ISO metric fine thread in accordance with DIN 13, type B (closed, pre-slotted)
Item no. Thread Pitch Ø Height mm mm mm
8652-6 M6 1,00 20 7
8652-8 M8 1,25 25 9
8652-10 M10 1,50 30 11
8652-12 M12 1,75 38 14
Item no. Treading die Ø Suitable for
8659-2 20 x 7,0 M5 - 6
8659-3 25 x 9,0 M7 - 9
8659-4 30 x 11,0 M10 - 11
8659-5 38 x 14,0 M12 - 14
8659-6 45 x 18,0 M16 - 20
8659-7 55 x 22,0 M22 - 24
Item no. Thread Pitch Ø Height mm mm mm
8652-10-125 M10 x 1,25 1,25 30 11
8652-12-125 M12 x 1,25 1,25 38 11
8652-12-15 M12 x 1,50 1,50 38 10
8652-14-15 M14 x 1,50 1,50 38 10
8652-16-15 M16 x 1,50 1,50 45 14
8652-24-15 M24 x 1,50 1,50 55 16
01 02
03
Further tools available from our cooperation partners
BOSCH & HAZET