Upload
buituong
View
223
Download
1
Embed Size (px)
Citation preview
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-1GeneralEquipment
Boring Bars and StandsFeatures:
V-belt spindle drive eliminatesevidence of chatter on cylinder wallsassociated with gear drives.Boring spindle is screw fed with fast,automatic retraction.Auto stop disengages feed whentool bit has passed through cylinder.Three finger centering of the boringhead in cylinder for maximumaccuracy.Quick, positive non-distortinganchoring system mounts boring barto fixture (stand). Required toservice motorcycle cylinders.
Models and Specifications:
Motorcycle Boring StandModel No. KWY057129107Elongated slot accommodates single,twin and four cylinder blocks. Floatingclamp plate locates cylinder quickly andaccurately.
Specifications:Bore diameter: 4-1/2"Shipping: 250 lbs.
Automotive Boring Standwith Cycle FixtureModel No. KWY054000150Large capacity — from small motorcycleto large automotive blocks. Includesmotorcycle fixture KWY054090000.
Replacements:KWY062107200 Finishing bit for
KWY055000115 andKWY057001003
KWY000211010 Super lapping discKWY002002345 Super lapping oil, 1/2
pint
Boring Bars and Stands/Deluxe Valve Refacer
Supplied By: KW Products
KWY055000115,KWY057001003
Model No. KWY055000115 KWY057001003Bore capacity 2.65 – 5.33" 2.2 – 4.4"Stroke 14-1/2" 12"Motor 3/4 hp 1/2 hpWeight(without stand) 232 lbs. 197 lbs.
SVS Series II DeluxeValve RefacerModel No. KWY012000500
Features:Precision 6-ball chuck for fastaccurate centering of valve — nocollets to change.Guaranteed chuck accuracy .0005"or less run-out.Standard 4 – 14.4 mm chuckcapacity.Variable speed chuck to match theproper speed needed to grindtoday’s variety of valve materials.Deluxe control panel places impor-tant features at your fingertips —valve counter, chuck speed control,separate switch positions for spindleand chuck motors, valve speed chartand machine maintenance chart.
Specifications:Chuck capacity: .1575" (4.0 mm) –.5625" (14.4 mm)Valve head diameter capacity:.75 – 4"Minimum stem length: 2.6"Surface wheel diameter: 3"Spindle drive motor: 1/2 hpChuck drive motor: Gear drive1/12 hpShipping weight: 280 lbs.
Options:KWY012003900 Valve refacer cabinet.KWY010070900 General purpose
stone.KWY010070850 Titanium stone.KWY010071008 Finishing stone.KWY010030072 General purpose stem
grinding stone.KWY000211273 Grinding oil, 1 gallon.
KWY012000500
5-2
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Micrometers/Gauges/Calipers
Supplied By: Snap-on/Sun/Central Tools, Inc./America Kowa Seiki
MCAL6
3-Piece, Digital MetricMicrometer SetModel No. MIC103M
Includes:MIC1M 0 – 25 mm at 0.01 mm
graduation.MIC2M 25 – 50 mm at 0.01 mm
graduation.MIC3M 50 – 75 mm at 0.01 mm
graduation.Master storage case. Also contains
cutouts for MIC4M andMIC5M.
Also Available:MIC4M 75 – 100 mm.MIC5M 100 – 125 mm.
WARRANTY: One year material andworkmanship.
CM6421
U.S./Metric Calipers,150 mm DigitalModel No. MCAL6
Features:Gauge is 0 – 150 mm in .01 mmresolution (0 – 6" in .00005"resolution).Use for inside, outside, depth andstep measurements.Large LCD indicates inch/mm, holdand zero functions.Incremental floating zero.Zero button may be configured ashold button.Automatically configures as a dataoutput switch for SPC applications.Hardened stainless steelconstruction.
WARRANTY: Three years material andworkmanship.
Vernier U.S./MetricCaliper, 150 mmNon-DigitalModel No. CM6421
Features:Range is 0 – 150 mm in .05 mmincrements (0 – 6" in .001"increments).Knurled fine adjustment control andthumb lock screws.
WARRANTY: One year material andworkmanship.
Precision Cylinder BoreGaugeModel No. CNT6632
Features:Measure cylinder wear withoutremoving pistons.Measure bores up to 12" deep.Check cylinder diameter when usedwith a micrometer.Contact extensions included.
Specifications:Range: 2 – 8"Graduations : .0005"Reading: 0 – 50Indicator no.: CNT4585
CNT6632
Bore GaugesSpecifications:
Accuracy: 1/100 mm
Models:KD-3-1 Bore gauge (35 – 80 mm)
with dial gaugeAKSKD32 Bore gauge (50 – 150 mm)
without dial gaugeKD-3-6 Bore gauge (18 – 35 mm)
with dial gauge
Includes:Dial indicator.Handle.Extensions.Storage box.
WARRANTY: 90 days on dial indicatorand three years on anvil.
KD-3-1
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-3GeneralEquipment
Precision Measuring Tools
Supplied By: Snap-on/Sun/America Kowa Seiki
4-Piece Small HoleGauge SetModel No. MROUND4
Features:Knurled knob at handle for sizeadjustment.Full round gauging surface with flatbottom.Carbide measuring faces.Ratchet stop on all models.
Specifications:Flatness: .00003"Parallelism: .00005" for 0 – 1"
Includes:.125 – 200" gauge, 3-5/8" long..200 – 300" gauge, 3-7/8" long..300 – 400" gauge, 4" long..400 – 500" gauge, 4-1/2" long.
WARRANTY: One year.
MROUND4
YA328A
Angle Locator LevelModel No. YA328APrecise, accurate tool to determineangle measurements. Magnetic stripsand v-grooving handle a variety of anglerequirements. 3" square magnetic base.
Dial IndicatorModel No. KK-14-6
Features:Microfine graduations are in black forcontinuous readings and in red forbalanced readings. A separaterevolution counter hand is locatedon face of dial.The adjustable tolerance limit markermeets AGD specifications. Themounting lug is located on back ofgauge.
Specifications:Range: 0 – 10 mmGraduations: 0.01 mm
WARRANTY: 90 days.
KK-14-6
KK-13-1
Dial IndicatorMagnetic BaseModel No. KK-13-1Attaches to dial indicator shaft or lug.Features on/off magnetic switch and“V” base for mounting on curvedsurfaces.
WARRANTY: One year.
KK-16-2
V-BlocksFor precision measuring and straighten-ing operations. Made from rolled steel.
Models:KK-16-2 100 mm x 58 mm x 35 mmKK-16-3 125 mm x 80 mm x 50 mm
WARRANTY: Lifetime.
GA3634
Ball Joint/Disc BrakeDial Test Indicator SetModel No. GA3634
Features:Check ball joint wear, brake rotorrun-out, gear backlash and valveguide or camshaft wear.Special locking pliers clamp securelyto any convenient object.Eliminates vibration problems andfalse readings by mounting directlyon spindle.Plastic case (Model No. CM6563450)to carry set.
Specification:Range: 1.00"
WARRANTY: One year material andworkmanship.
5-4
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Parts WasherModel No. HMHSWH1630Economical parts washer includes a 33"l x 21" w x 8" d tub with fusible linkedsafety lid, dual mounting rings for both16 and 30 gallon drums, flow-thrucleaning brush, drain screen, 120 voltelectrical controls. Choice of colors.
Options:HMHA3210N Deluxe work lampHMHD16 16 gallon drumHMHD30 30 gallon drum
Supplied By: Hassel Material Handling Co./Snap-on/Sun
Parts Washers/Presses
HMHSWH1630Shown with optional drum.
HMHDM32Shown with optional light.
Parts WasherModel No. HMHDM32Heavy-duty parts washer includes 32" lx 22" w x 10" d tub with fusible linkedfire cover, flex hose, baggie liner, drainassembly, 30 gallon drum, 120 voltelectrical controls. Choice of colors.
Options:HMHA3210N Deluxe work lampHMHA3236SM Flow-thru cleaning
brush
Hydraulic Shop Presses
Features:Dual return springs retract ram.Steel cross brace prevents spreadingof frame under load.Adjustable press bed.Comes complete with arbor plateand bearing shield.Jacks pre-tapped for optionalpressure gauge.
3-Ton Arbor PressModel No. CG100
Features:2" steel channel frame.Bolts to workbench.Gearing multiplies handle pressure upto 3 tons of force.
Specifications:Dimensions: 18" h x 11-1/8" wBase size: 11-1/8" x 6-1/8"Vertical capacity: 12-3/4"Opening width: 9"Width between work brackets: 9"Pressure shaft stroke: 9" (whenutility punch is attached)
Includes:Arbor press frame.CG100-14 Utility punch.CG100-15 Work block.CG100-16 Adaptor to convert
1/2" drive to 5/16"round drive.
YA627A
CG100
Accessories:CG101-1 Rectifier supportCG101-2 Housing supportCG101-3 Diode punchCG101-4 Bearing punchCG101-5 Bearing plateCG101-6 Flat driverCG101-7 7/32" Square driverCG101-8 9/32" Square driver
Bed Bed Hole WorkingModel No. Capacity Width Depth Spacing RangeYA621A 12-ton 19-3/4" 7" 4-1/2" Min. 0"
Max. 37-1/2"
YA627A 20-ton 20" 8" 4-1/2" Min. 0"
Max. 35"
Models and Specifications:
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-5GeneralEquipment
20-Ton Capacity ShopPressModel No. NRI78022D
Features:Bed plates included.Shielded heavy-duty ram returnsprings.Adjustable mounted hydraulic powerunit for horizontal movement onhead channel.Multiple working heights for pressbed.Zero distortion, heavy-dutystructural steel frame.
NRI78024
Shop Presses/Hydraulic Floor Press/1-Ton Arbor Press
Capacity Bed Ram Bed Adj. Base Base ShippingModel No. (Tons) Travel Travel Intervals Height Width Length WeightNRI78022D 20 35-1/2" 6-5/8" 4-3/4" 69-3/4" 28" 40-1/2" 394 lbs.NRI78024 25 38" 8" 4-3/4" 76-3/4" 28" 40" 430 lbs.
Supplied By: Norco/Snap-on/Sun
25-Ton Capacity DeluxeShop PressModel No. NRI78024Includes all the features of the standardmodels with the added convenience ofan air/hydraulic foot pump and pressuregauge.
Option:NRI78000 A pair of 1" x 4" x 10"
steel plates with "V"cutout on one edge andcircle cutout on theother.
Specifications:
10-Ton Hydraulic FloorPressModel No. CG170HYPress will handle many pressing,straightening and assembling jobs.Rams may be moved on any lateralposition. (2) work blocks, included witheach unit, are held in place by ex-tended bosses at the bottom. Workrails can be raised or lowered in 4"increments.
Specifications:Overall height: 32-1/2"Base area: 1' x 2'Channel width — side beam: 3".Channel width — head rail: 4".
Includes:CG120 Hydraulic ram, 10-ton.CG120-3-1 Hose.CG120-4 Coupler.CG170 Press frame.CG170-10 Ram back plate.CG170-11 Back plate gib.CG170-12 Gib cap screw.CG170-13 Back plate screw.CG170-9 Work blocks.CG4-2A Hydraulic pump.
CG170HY
1-Ton Arbor PressModel No. WVARBOR1
Features:Lever can be adjusted for specificjobs and provides maximumleverage.Precision cut steel ram and pinion foraccurate operation.Table and slotted table plates areflat and parallel to provide accuratesupport.Heavy-duty frame minimizes flexunder load, lasting longer thanbolted or pinned-style frames.Designed for general maintenance,intermittent use.Will handle many pressing, straight-ening and assembling jobs.Weighs 23 lbs.
WVARBOR1
5-6
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
6" Bench GrinderModel No. WIL172011/2 hp, 120 volt, 60 Hz, 3,450 r.p.m.
Includes:6" 60 grit medium wheel.6" 36 grit coarse wheel.
Bench Grinder/Vises/Pullers/Bearing Separator
Supplied By: Wilton/Snap-on
WIL17201
WIL1765
6" Mechanic’s ViseModel No. WIL746
Features:Replaceable serrated steel jawinserts and pipe jaws.Rugged 30,000 p.s.i. body parts.Enclosed, unbreakable box frame,steel channel.Totally enclosed spindle and nut.360° locking swivel base.
6-1/2" Tradesman BenchViseModel No. WIL1765
Features:Replaceable serrated steel jawinserts and pipe jaws.60,000 p.s.i. main stress parts.Straight line design, unbreakablespindle and nut.Totally enclosed spindle and nut.360° swivel base with double lock
WIL746
Pulley and Gear PullerModel No. CJ83C
Features:Ideal for servicing crankshaft pulleysand gears and timing gears on awide range of engines, accessorydrives and water pumps. Includes(2) each 3/8"-16 x 3", 5/16"-18 x 21/2", and M10-1.5 x 65mm bolts.Nominal capacity is 3.5 tons.Use to remove accessory drive pulley(replace with M1324). Includesyoke; (2) each 3/8"-16 x 3", 5/16"-18 x 2 1/2", and M10-1.5 x 65 mmstuds; and 3/4"-16 x 5" pressurescrew.
Specifications:Maximum reach: VariableMaximum spread: 5"Nominal capacity: 3-1/2 tonsPressure screw size: 3/4"-16 x3-1/2"
10-Ton 2-Jaw, PressureScrew PullerModel No. CG284
Specifications:Maximum reach: 15" (381 mm)Maximum spread:
Inside 4-3/4" – 11-1/2"(121 mm – 292 mm)Outside 13-3/4" (349 mm)
Jaw thickness: 3/8" (10 mm)Jaw width: 1" (25 mm)Pressure screw size: 3/4"-16 x18-15/16"
Puller SetModel No. CJ2003ASlide hammer power pulls many flange-type rear axles as well as axle bearings.
Includes:Slide puller.Axle yoke.Bearing adaptors.3/4" lock nut.Bearing hook.3/4"-16 x 22-1/2" slide screw.
6-1/8" Bearing SeparatorModel No. CJ952For separating and pulling doublebearings and close fitting gears. Usewith tapped hole, 2-jaw pullers or floorpresses.
Specifications:Side hole size: 5/8"-18Width: 5-7/8"Maximum spread: 6-1/8"
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-7GeneralEquipment
Bearing SeparatorModel No. CJ950A must for close fitted bearings andgears.
Specifications:Maximum spread: 60 mm (2-3/8")Minimum spread: 7 mm (3/8")Between bolts: 60 mm (2-3/8")
Bearing SeparatorModel No. CJ951For separating and pulling doublebearings and close fitting gears. Usewith tapped hole, two-jaw pullers orfloor presses.
Specifications:Maximum spread: 4-1/2"Minimum spread: 5/8"Between bolts: 4-3/8"
Separators/Puller Set/Driver Sets/Engine Service Tools
Supplied By: Snap-on/Sun
CJ950
CJ2001
Bushing Driver SetModel No. A157CGeneral purpose set for driving bush-ings, seals, bearings, etc. Includes (3)driver sizes. Handle features knurledsection for better grip. Adaptors heldon driver with knurled nut.
Includes:PH75 Bushing Driver.A157-10 Adaptor, 5/8" i.d.,
11/16" o.d.A157-11 Adaptor, 5/8" i.d.,
3/4" o.d.A157-12 Adaptor, 11/16" i.d.,
13/16" o.d.A157-13 Adaptor, 3/4" i.d.,
7/8" o.d.A157-14 Adaptor, 13/16" i.d.,
15/16" o.d.A157-15 Adaptor, 7/8" i.d.,
1" o.d.A157-16 Adaptor, 15/16" i.d.,
1-1/16" o.d.A157-17 Adaptor, 1" i.d.,
1-1/8" o.d.A157-18 Adaptor, 1-1/16" i.d.,
1-3/16" o.d.A157-19 Adaptor, 1-1/8" i.d.,
1-1/4" o.d.A157-2 Handle, large.A157-20 Adaptor, 1-3/16" i.d.,
1-5/16" o.d.A157-21 Adaptor, 1-1/4" i.d.,
1-3/8" o.d.A157-22 Adaptor, 15/32" i.d.,
17/32" o.d.A157-3 Handle, Small.A157-4 Driver nut, 5/16"— 24
thread.A157-5 Driver nut, 1/2"— 20
thread.A157-6 Adaptor, 3/8" i.d.,
7/16" o.d.A157-7 Adaptor, 7/16" i.d.,
1/2" o.d.A157-8 Adaptor, 1/2" i.d.,
5/8" o.d.A157-9 Adaptor, 9/16" i.d.,
11/16" o.d.A257-49 Adaptor, 2-15/16" i.d.,
3-1/16" o.d.PB20 Box, plastic.
A157C
Puller SetModel No. CJ2001Yoke-type puller set.
PIT120
3/8" Impact DriverModel No. PIT120Delivers cam action impact when struckwith a hammer for loosening or tighten-ing fasteners. Industrial finish.
5-8
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Supplied By: AMMCO/Marson
Engine Service Tools/Cylinder Hones/Rivet Gun
AMM500
AMM3567 AMM3568
Large Bore CylinderHoneModel No. AMM500
Features:Constant, automatically correcthoning pressure.Perfect finish for fast ring seating.Use with 1/2" heavy-duty drill —500 r.p.m.Range: 63 – 105 mm(2-1/2 – 4-1/8").Oversize stone carriers increaserange to 146 mm (5-3/4").
Includes:AMM620 Stone set.AMM388, AMM389 Stone carrier
sets.AMM3567 Drive shank.AMM3568 Drive shank
extension.AMM37 Stone retainer
springs (2).
AMM37
AMM388
AMM389
AMM620AMM621
Replacements:AMM3567 Drive shankAMM3568 Drive shank extensionAMM37 Stone retainer springs (2)AMM388 Stone carrier set,
60 – 100 mm(2-1/2 – 3-15/16")
AMM389 Stone carrier set,100 – 105 mm(3-15/16 – 4-1/8")
AMM619 60 grit stones(2 stones/felts)
AMM620 220 grit stones(2 stones/felts)
AMM621 400 grit stones(2 stones/felts)
MAR39200HD
Thread-Setter™Tool KitModel No. MAR39200HD
Features:Patented bearing design, comfort-able hand grips and a locking chain.Installs rivet nuts up to 1/4" and6mm steel. 1/4" x 20 mandrel.Forged, heat treated steel upperhandle.Precision die cast body of highstrength aluminum alloy.Patented fulcrum pin design.Weight: 1 lb. 3 oz.
Applications:Use on XB models to replace rivet nutsin Buell frames and subframes. Rivetnuts are used to attach both bodyworkand components to the Buell frame.
Replacement:MAR39258 1/4" x 20 mandrel
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-9GeneralEquipment
Small Engine CylinderHoneModel No. AMM3950Range: 47.6 – 69.8 mm (1-7/8" –2-3/4"). Cleans and trues to factoryspecifications. Adjustable depth stop forblind cylinders. Approved for Briggs &Stratton engines. Use with 1/2" drill.
Includes:AMM3951, AMM3952 Stone sets.AMM1880 Drive shank.AMM8854 Depth stop.Oversize stone carriers to increaserange to 92 mm (3-5/8").
Replacements:AMM3951 Roughing stones — 60
grit for cast iron. Range:47.6 – 69.8 mm (1-7/8 –2-3/4"). (2 stones, 2felts)
AMM3952 Finishing stones — 220grit for cast iron. Range:47.6 – 69.8 mm (1-7/8 –2-3/4"). (2 stones, 2felts)
AMM3953 Roughing stones — 60grit for cast iron. Range:69.8 – 92 mm (2-3/4 – 3-5/8")(2 stones, 2 felts)
AMM3954 Finishing stones — 220grit for cast iron. Range:69.8 – 92 mm (2-3/4 –3-5/8"). (2 stones, 2felts)
Supplied By: AMMCO/Snap-on/Sun
Cylinder Hones/Heat Gun/Soldering Kit
AMM3950 AMM8550
Midget Cylinder HoneModel No. AMM8550Range: 35 – 50.8 mm (1-3/8 – 2").Oversize stone carriers increase range to66.7 mm (2-5/8"). Don’t let the“midget” size fool you! This mightyperformer has the same deluxe featuresas our larger hones, including constant,correct honing pressure. Accuracy to.013 mm (0.0005"). Adjustable depthstop for blind cylinders. Approved forBriggs & Stratton engines.
Includes:AMM8588, AMM8560 Stone sets.AMM556 Drive shank.AMM8554 Depth stop.Metal storage box.
Replacements:AMM8560 Finishing stones — 220
grit. Range: 35 –50.8 mm (1-3/8 – 2")(2 stones, 2 felts)
AMM8588 Roughing stones — 60grit. Range: 35 –50.8 mm (1-3/8 – 2")(2 stones, 2 felts)
AMM8589 Roughing stones — 60grit. Range: 50.8 –66.7 mm (2 – 2-5/8")(2 stones, 2 felts)
Heat GunModel No. ETB1600
Features:Lightweight source of directed heat.Ten position, variable temperature,100° – 1,000° F.Shockproof and cool-running withtough high impact heat resistantpolymer housing.120 volt/50/60 Hz, 1,400 watts,4,100 BTU.
Soldering KitModel No. R450BHeats up fast with less wattage.Includes the gun, three assorted tips,50/50 solder, users manual and customblow-molded case.
Features:Slim, single-post design for work inconfined areas.Pistol grip provides balance, comfortand control.Built-in spotlight illuminates workarea.Fast warm-up of tips in 10 – 15seconds.Quick tip change takes 30 secondsor less.(3) tips provided for light-, medium-and heavy-duty jobs.
Accessories:R450A-1 Light-duty solder tipR450A-2 Medium-duty solder tipR450A-3 Heavy-duty solder tip
ETB1600
R450B
5-10
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Supplied By: Snap-on/Sun
Screwdriver/Drill Bit Sets/Tap and Die Sets
Cordless ScrewdriverModel No. ETBS360Forward, reverse, and manual modes.12 position 1/4" slip chuck accommo-dates most 1/4" power bits. 200 r.p.m.
Specifications:No-load speed: 170 r.p.m.Stall torque: 23 in.-lb.
Includes:#2 Phillips and 5.5 slotted bits.3.6 volt Ni-cad battery recharges inabout 3 hours.120 volt plug-in style charger.
ETBS360
Metric Drill Bit SetModel No. DBM125CThese high speed steel drill bits are anexcellent choice for general drillingapplications. Includes 1 – 13 mm bits in1/2 mm increments (25 pcs.) in metalindex.
Inch Drill Bit SetModel No. DBC229AThese high speed steel drill bits are anexcellent choice for general drillingapplications. Includes 1/16 – 1/2" bits in1/64" increments (29 pcs.) in metalindex.
DBM125C
Metric Tap and Die SetModel No. TDM117ATaps and dies from 3 – 12 mm, 2 diestocks, (3) tap wrenches, a metricthread pitch gauge and a screwdriver(41 pcs.) in a plastic storage case.
Thread Sizes Included:M3 x 0.50M4 x 0.70M4 x 0.75M5 x 0.80M5 x 0.90M6 x 1.00M7 x 1.00M8 x 1.00
Also Available:D1412M M14 x 1.25D1415M M14 x 1.50D1420M M14 x 2.00T1412M M14 x 1.25T1415M M14 x 1.50T1420M M14 x 2.00
Inch Tap and Die SetModel No. TD2425Taps and dies, (2) die stocks, (3) tapwrenches, thread pitch gauge and ascrewdriver (41 pcs.) in a plastic storagecase.
Thread Sizes Included:Coarse1/4" – 20 NC5/16" – 18 NC3/8" – 16 NC7/16" – 14 NC1/2" – 13 NCFine1/4" – 28 NF5/16" – 24 NF3/8" – 24 NF7/16" – 20 NF1/2" – 20 NF
M8 x 1.25M9 x 1.00M9 x 1.25M10 x 1.25M10 x 1.50M11 x 1.50M12 x 1.50M12 x 1.75
Machine4 – 406 – 328 – 3210 – 2410 – 3212 – 24Pipe1/8" – 27 NPT
TDM117A
TDM13A
Metric Spark PlugHole Tap SetModel No. TDM13ASet includes (4) taps and a four-stepcounterboring tool.
Thread Sizes Included:M10 x 1.00M12 x 1.25M14 x 1.25M18 x 1.50
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-11GeneralEquipment
Torque Wrenches,“QD” TwistHandle TypeFeatures:
Each wrench includes a certificate ofcalibration.All “QD” series torque wrenches areaccurate to ± 4% clockwise and± 6% counter clockwise from 20%of full scale to full scale.Locking collar automatically returnsto lockedposition.Plastic storage case included.
Specifications:
Torque Wrenches/Welding KitsTorque Wrench,3/8" Drive,Torquometer TypeModel No. TESI30FU
Features:Easy-to-read dial face allows user tosee torque readings as they climb.Ideal for measuring differential sliptorque.Follow-up pointer stays at highestreading.Accuracy is within ± 2% from 20%of full scale to full scale clockwiseand counter clockwise.Plastic storage case included.
Specifications:Drive: 3/8"Range: 0 – 30 NmIncrements: 1 NmLength: 9-15/16"
Supplied By: Snap-on/Sun
QD Series
TESI30FU
Model No. Drive Range Increments LengthQD1RN6 1/4" 12 – 60 Nm .5 Nm 9-7/8"QD2RN100 3/8" 20 – 100 Nm .5 Nm 16-1/4"QD3RN200 1/2" 40 – 200 Nm 2 Nm 18-1/4"QD1R50 1/4" 10 – 50 in.-lbs. .5 in.-lb. 9-7/8"QD2R100 3/8" 20 – 100 ft.-lbs. .5 ft.-lb. 15-9/16"QD3R250 1/2" 50 – 250 ft.-lbs. 1 ft.-lb. 24-3/16"
Heavy-Duty Welding KitModel No. WE350Tough, single-stage regulators.
Features:Forged brass bodies and housingcaps plus large 2-1/2" diametergauges.Brass torch handle and tri-tubecutting attachment.Built-in check valves for addedsafety.
Includes:Sizes 0, 3 and 5 welding tips.Size 8 multi-flame rosebud tip.25' of 1/4" hose.Flip-up goggles.Spark lighter.
WE350
WE250
Two-Stage Welding KitModel No. WE250
Includes:Two-stage oxygen and fuel gaspressure regulators for smooth,consistent gas control.Durable brass torch handle withbuilt-in gas check valves for addedoperator safety.Size 8 rosebud tip.20' of 1/4" dualine hose.Flip-up welding goggles.Spark lighter.
5-12
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Creepers/Protective Covers
Supplied By: Snap-on/Sun/Equipment Solutions
Seat CreepersSeat measures 10" w x 14" l withmolded tool drawer beneath.
Models:JC24BBL BlackJC24BO Orange
Adjustable SeatCreepersPneumatic column provides range of 16-1/2 – 21-1/2". 360° swivel seat and (4)3" casters.
Models:JCH40C Round seatJCHP30A High back seat
JC23CBLJCHP30A
JC26CBL
JC45BBL
Padded Low ProfileCreepersLow-profile design rests 2" from theground. (6) double ball bearing caster-style wheels. 17" w x 40" l.16-gauge 3/4" steel frame.
Models:JC23CBL BlackJC23CO Orange
Adjustable Padded Low-Profile CreepersSame as low-profile creepers exceptheadrest adjusts to any of (4) positions.
Models:JC26CBL BlackJC26CO Orange
Heavy-Duty PaddedCreepers1" steel frame for extra strength. (4)3-1/2" casters provide 800 lb. capacity.22" w x 40" l.
Models:JC45BBL BlackJC45BO Orange
Heavy-Duty AdjustablePadded CreepersSame as heavy-duty padded creeperexcept headrest adjusts to any of (4)positions.
Models:JC46ABL BlackJC46AO Orange
Protect Surfaces FromNicks, Scratches AndDents!
High-quality, heavy-duty, leatherlook vinyl construction features thickpadding to prevent damage topainted and chrome surfaces.Grip-type inner surface holds themat where you put it.Sewn seams and trim forfinished look. KAC1224TC
KAC1230FC
Protective Work BenchCoverModel No. KAC62430MProtect your benchtop finish anddelicate parts and accessories placed ordropped on your workbench. Helpskeep parts from bouncing or rolling offthe bench top. Custom 24" w x 30" l,2 per package.
Protective Fender CoverModel No. KAC1230FCProtect the front fender when workingon or around your customer’s motor-cycle. Custom 12" w x 30" l size workson all bikes, from big touring models tosmaller sports bikes.
KAC62430M
Protective Tank CoverModel No. KAC1224TCProtect the gas tank when working onor around your customer’s motorcycle.Custom 12" w x 24" l size works on allbikes, from big touring models tosmaller sports bikes – even V-Rod andBuell models.
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-13GeneralEquipment
Supplied By: Central Tools, Inc.
LightsStomp Lites®
Model No. CNT11008
Features:40' auto reel.Strong enough to stand on.Extra thick shatterproof housing.Heavy-duty end caps.Patented rough service bulb forsuperior impact protection.Superior cord life and flexibility withoil- and water- resistant 18/2 gaugecord.Heavy-duty swivel hook.
Bounce Lites®
Model No. CNT12023
Features:40' heavy-duty reel.Bounces instead of breaking.Patented rough service bulb forsuperior impact protection.Superior cord life and flexibility withoil- and water-resistant 18/2 gaugecord.Fully enclosed safety switch.Heavy-duty swivel hook.
Angle LitesModel No. CNT11016
Features:40' heavy-duty reel.Unique impact- and solvent-resistantconstruction.Patented angle style.Patented rough service bulb forsuperior impact protection.Floating socket for additional bulbprotection.Superior cord life and flexibility withoil- and water-resistant 16/3 gaugecord.Magnetic clamp with Velcro strap tofit anywhere on light.Recessed power switch and 13 amppower outlet. (10 amp outlet with reel.)Heavy-duty swivel hook.
CNT11016
CNT11008
CNT12023
• One-stopshopping.
• Products fromthe best sourcesin the serviceequipmentindustry.
• Competitivelease rates.
• Knowledgeablecustomer servicerepresentatives.
• Special purchaseopportunitiesthroughout theyear.
• Price matching.
• And muchmore …
ProgramBenefits!
5-14
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Pressure Washers
Supplied By: Cam Spray
Wall-Mount PressureWashersFeatures:
The wall-mount design easily hangson the wall.The wall mounting brackets get thepressure washer off the floor at eyelevel for easy operation.Features include thermal pumpprotection, adjustable pressure,downstream dual chemical injection,trigger gun with insulated wand andinterchangeable tips, 0°, 15° and 25°pressure tips and soap tip, twist fastquick couplers and 40' nonmarkinghose.
Cold Water, Electric CartPressure WashersFeatures:
The cart design makes it easy tomove your machine where you needthe cleaning done.Features include thermal pumpprotection, adjustable pressure,downstream dual chemical injection,trigger gun with insulated wand andinterchangeable tips, 0°, 15°, 25°and 40° pressure tips and soap tip,twist fast quick couplers and 40'nonmarking hose.
CAM1000MX
CAM1000WMStand not included.
Pump has ceramic plungers withreplaceable stainless steel valves,forged crankshaft, roller bearings inoil bath lubrication.Protected by a ground fault circuitinterrupter on a 35' electric cord.Pump handles tap water up to180° F.
Models and Specifications:Model No. CAM1000MX CAM1500MX CAM20005MXHorsepower 1.5 3.0 5.0Volts/Amps 115/15 220/17 220/21P.S.I. 1,000 1,500 2,000G.P.M. 2.2 3.0 3.0
Models and Specifications:Model No. CAM1000WM CAM1500WMHorsepower 1.5 3.0Volts/Amps 115/15 220/17P.S.I. 1,000 1,500G.P.M. 2.2 3.0
Pump has ceramic plungers withreplaceable stainless steel valves,forged crankshaft, roller bearings in oilbath lubrication.Protected by a ground fault circuitinterrupter on a 35' electric cord.Units are built on a powder coatedcart with space for (2) chemicalbottles, wand holder and hose rack.
High Pressure WasherCart-TypeElectric EngineModel No. CAM1500AX
Features:Pump: Ceramic plunger pump haseasily replaceable valves, forgedcrankshaft, roller bearings in oil bathlubrication, designed for many hoursof dependability and easymaintenance.Multireg for variable spray patternfrom 0 – 60° spray pattern andhigh-low adjustment for chemicalapplication.Equipped with GFCI to shut downpower supply in the event ofelectrical ground failure.Trigger gun for positive shutoff anduser safety.Adjustable pressure for variedapplications.40', 3/8" braided high pressureheavy-duty nonmarking rubber hosewith swivel to prevent tangling.Twist fast quick couplers for quickremoval and attachment of pressurehose.High-density, rotationally moldedpolyethylene cart is durable, will notrust or fade for long lastingappearance.
Specifications:Horsepower: 2.0Power: 120 volts/19 ampsPressure maximum: 1,450 p.s.i.Flow rate: 2.1 g.p.m.
CAM1500AX
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-15GeneralEquipment
Motorcycle Dryers
Air Force® Blaster®
Motorcycle DryerLightweight, portable motorcycle dryer.Powerful motor makes drying a motor-cycle easy and eliminates water spotson chrome and painted surfaces. Cancut drying time by up to 75%. Saferand more convenient than compressedair. Blows clean, dry, warm filtered air.Multiple attachments are easy tochange for drying large areas andrestricted spaces. Compact design iseasy to use, carry and maneuver aroundthe shop.
Features:Rugged steel construction.10' heavy-duty, crush-proof hose.(4) interchangeable attachments.Durable baked enamel finish.Heavy-duty neoprene blower nozzle.Made in the USA.
Specifications:4.0 peak hp (29,000 f.p.m.)10 amp motorWeight: 8 lbs.2-stage dual fan
Models:MVCB3CD Air Force Blaster 120 voltMVCB3CD230 Air Force Blaster 230 volt
Accessory:MVCHNBRK2 Air Force Blaster wall/
table bracket with 10'extension hose (notshown) enables users tomount the Air ForceBlaster vertically on a wallor horizontally on a table
MVCB3CD
Supplied By: Metropolitan Vacuum
Air Force® MasterBlaster® MotorcycleDryer Heavy-DutyCommercial GradeModel No. MVCMB3CD
Features:(2) Twin fan 4.0 peak hp motors fora total 8 hp that deliver up to58,500 f.p.m. of clean, filteredwarm air.(2) switches allow users to set theair flow and temperature at (3)different levels.Use either motor independently orboth simultaneously for maximumpower.(5) different nozzles enable users toposition airflow where desired andeliminate water spots.All steel construction.
Includes:8 peak hp dryer unit on wheels with12' grounded cord.10' heavy-duty hose.Heavy-duty neoprene blower nozzle.Air concentrator.Air streamer tool.Micro adaptor.1-1/4" adaptor.Easy change foam filter.
WARRANTY: One year.
MVCMB3CD
MVCHNBRK2Optional wall/table
bracket for MVCB3CD
5-16
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Exhaust Removal
Supplied By: Harvey Industries, Inc.
Overhead Exhaust DropTelescopic® Design(3) lengths of lightweight flexibletubing slide one into another, givingthe appearance of (1) 6' length oftubing attached to the overhead duct.The bottom length of tubing andexhaust pipe adaptor are non-crushneoprene rubber.
Models:HRVTS-30 3" d hoseHRVTS-40 4" d hose
HRVHF-477 HRVHF-300
Underground ExhaustSystemsUnderground systems are available inboth “plug-in” and telescoping exhausthose styles. Both styles utilize moldedhigh-impact strength high temperatureresistant floor fittings.
Plug-in type exhaust systems are forthose installations that do not requirethe storage of the exhaust hose insidethe underground pipe.
NOTE: Call 1-877-HDEQUIP (433-7847)for product information.
Twist-Lock Hose
TelescopingStyle Floor
Fitting
HRVH30-3-47
Exhaust Pipe AdaptorsTo avoid continual replacement ofexhaust hose and for a proper fit,exhaust pipe adaptors should be used.Models listed are manufactured inrubber for normal use. Stainless steelalso available for dynamometer use.
Models:HRVHF-477 Oval — 3" x 6-1/2"HRVHF-577 Oval — 3" x 8-1/2"HRVHF-250 Round — 2-1/2" o.d.
exhaust pipeHRVHF-300 Round — 3" o.d. exhaust
pipeHRVHF-350 Round — 3-1/2" o.d.
exhaust pipeHRVHF-400 Round — 4" o.d. exhaust
pipe
Overhead Exhaust DropTelescopic Design
Twist-Lock Non-CrushRubber Exhaust HoseTwist-lock hose represents the latestadvancements in technology andfabrication of rubber exhaust hose.Heat resistant to 600° F. Severallengths can be connected togetherwithout the use of couplers.
Models:HRVH-3011 3" d x 11" lHRVH-4011 4" d x 11" l
NOTE: Rubber exhaust hose is notrecommended for dyno use.
RHR Series RetractableExhaust Hose ReelThe spring-operated hose reel isdesigned for years of trouble-freeservice and can be adapted to all typesof vehicles. Hose supplied is fabricatedof silicone fiberglass with an internalwire helix, rubber-coated and is heatresistant to 600° F. Hose reel is shippedprewound and complete with automaticrecoil, lock, latch, hose, overhead ductconnector with clamps, exhaust pipeadaptor and stop collar with clamps.
Exhaust BlowersFeatures:
Welded housing,wheels and framesensure solid,rattle-free units.Wheels supportedby heavy cast ironhubs and are staticand dynamicbalanced.Belt drive units are equipped withvariable speed drives.Configurations available in directdrive, belt drive and in-line blowers.Discharge may be changed to anyone of eight directions on site orspecified on order.
NOTE: Call 1-877-HDEQUIP (433-7847)for product information.
“Y” HarnessFor dual exhaust vehicles. Includes two4' and one 2' hose sections, one Yfitting and two exhaust pipe adaptors.
Models:HRVH-30-3-47 3" d hoseHRVH-40-4-57 4" d hose
T O O R D E R F A X : 1 - 8 0 0 - 8 9 2 - 9 6 5 1
5-17GeneralEquipment
Exhaust Removal/Magnetic Trays
Supplied By: JohnDow/Snap-on/Sun
EuroVent™ ExhaustExtraction SystemThe EuroVent™ system can be de-signed to fit the requirements of anyservice department — large or small.Plus — a single EuroVent ventilationcrab can service as few or as many baysas required — and maintain a profes-sional appearance.
Traditional ventilation systems requirednumerous hoses to service the sameamount of bays that a single EuroVentexhaust crab can cover.
When needed, the exhaust crab iseasily pulled along the rail and posi-tioned next to the vehicle. Theextraction hose easily connects to thetailpipe. When not in use, the hose isretracted and stays off of the floor andout of the way.
Features:Aluminum rail is designed to serve asan exhaust ventilation canal as wellas a trolley rail for the sliding crab.The self-supporting shape andlightweight construction of the railmakes installation easy.Because of the unique design of therail, the crab can smoothly and easilytravel along its length, utilizing (8)ball bearing Teflon wheels.The rail incorporates a neoprene sealthat closes tight when the system ison — allowing the effective removalof exhaust fumes by the ventilationcrab from any position along the rail.(4) wheels on the top of the crabcarry the load while the bottomwheels guide the crab.The crab can be equipped with anexhaust hose in diameters of 3" or4".
MK-1 Portable ExhaustExtraction SystemModel No. JDOMK1
Features:Positioned next to the vehicleexhaust, 3/4 hp high output suctionfan captures the fumes and dis-charges them safely up to 30' away.Fan height easily adjusts to matchvehicle’s tailpipe height. Works onsingle- or dual-exhaust vehicles.Includes 30' of 6" diameter exhausthose.
WARRANTY (ALL PRODUCTS): One year.
NOTE: Most systems can be engineeredby using these basic components. Call1-888-424-6857 for a product video,design and pricing assistance.
A. Exhaust FanB. Fan Connecting FlangeC. Rail Connecting FlangeD. Exhaust Rail & Neo-
prene SealE. Stop FlangeF. Sliding CrabG. Exhaust HoseH. Hose SupportI. Hose Balancer
Components List
JDOALU1704Aluminumexhaust
rail.JDOCARALU75F
Sliding craband hose reel.
JDOMK1
Magnetic TraysMagnetically holds parts or tools.Magnetized bottom attaches to any flatiron or steel surface.
Models:MRB10 Rectangular magnetic tray
holds metal parts and smalltools. Magnetically attachesto any flat iron or steelsurface. 9-1/2" l x 5-1/2" w
MRB12 Rectangular magnetic trayholds metal parts and smalltools. Magnetically attachesto any flat iron or steelsurface. Features (3) 3-1/8"diameter magnets that arerubber coated to preventscratching.6-5/16" l x 14-7/32" w
MRB15 Square magnetic tray keepstools or parts within easyreach. Stainless steel with(4) large rubber-basedmagnets on the bottom toresist scratching. 11-5/8" l x10-3/4" w x 1/2" d
MRB5 Round magnetic stainlesssteel dish features powerfulmounting magnet. Securelyholds small parts and tools.5-3/8" i.d.
MRB5
MRB10
MRB12
MRB15
5-18
T O O R D E R C A L L : 1 - 8 7 7 - H D E Q U I P ( 4 3 3 - 7 8 4 7 )
GeneralEquipment
Fans/Key Duplicator/Key Blanks
Supplied By: Marley/Kaba Ilco
Heavy-Duty OscillatingAir CirculatorsThis fan is ideal for providing generalcooling in occupied open areas.
Features:Shipped with factory assembledmotor blade guard to simplifyassembly.3-speed, 1/4 hp, totally enclosedmotor.Durable, safety clutch-style oscillatingmechanism.Set to operate at 45°, 90° or in afixed position.Meets OSHA standards.U.L./ETL listed.
Models:LEE24ACWU 24" wall-mount fan
(head: 41 lb., mount:5 lb.)
LEE30ACWU 30" wall-mount fan(head: 47 lb., mount:5 lb.)
LEE24ACP-U 24" pedestal fan (head:41 lb., mount: 35 lb.)
Power Cats® PortableBlowerModel No. LEE1200XL
Features:The Power Cat is a unique portableblower that can be used for ventilat-ing, cooling and heating the workspace.Blower rotates 90°.Duct accessories available.Wall-mounted or freestanding.25' cord.
Specifications:120 volt, 60 Hz motor, 1,120/877c.f.m.Duplex receptacle, heavy-duty cord44 lb. shipping weight
LEE24ACP-U
LEE1200XL
Tubular Key DuplicatorThe popularity of high security tubularkeys makes the 009 key machine theperfect addition to your shop or van.It’s easy to setup, easy to operate andduplicates accurate copies in seconds.
Features:Unique, positive indexing featureassures fast, accurate location ofeach cut. Also available withoutindexing feature for cutting 8 pin oroff-center tubular keys. (009-DNX)Transparent Lexan® cover offersclear visibility and provides protectionfrom chips and rotating cutter.Safety switch prevents machineoperation when protective cover isopen.Special high torque motor utilizessealed ball bearing for enhanceddurability.Mounting edges make permanentbench-mount installation easy.Designed to duplicate “middle size”tubular keys only.
ILC009110VAC
ILC1137SP
Tubular Key Blanks(25 per box)Model No. ILC1137SPSteel tubular key with plastic head.Harley-Davidson is embedded intoplastic. The key shaft and plastic headare shipped separately to allow dealerto cut the key on the key machineshown here. The plastic head slips onover the metal once the key has beencut.
LEE30ACP-U 30" pedestal fan (head:47 lb., mount: 35 lb.)
WARRANTY: Limited one year.
Specifications:Motor: 110 volt standard; 220 voltAC and 12 volt DC availableDimensions: 15" w x 6" d x 5" h(38 cm x 15 cm x 13 cm)Weight: 9 lbs. (4.1 kg)
Models:ILC009110VAC 110 volt AC unitILC009220VAC 220 volt AC unit
Accessory:ILC16CT Replacement cutter bit