Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 1/38
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 5/2018
Tiêu chuẩn – Quy chuẩn – Văn bản kỹ thuật đo lường Việt Nam ................................................................... 3
Dịch vụ. Tổ chức, quản lý và chất lượng công ty. Hành chính. Vận tải. Xã hội học ......................................... 3
Thiên văn. Đo đạc. Địa lý .................................................................................................................................... 3
An toàn lao động. Vệ sinh công nghiệp ............................................................................................................... 3
Hệ thống và kết cấu cơ khí công dụng chung ...................................................................................................... 3
Công nghệ thông tin ............................................................................................................................................. 3
Điện tử .................................................................................................................................................................. 4
Cơ học chính xác .................................................................................................................................................. 5
Phương tiện giao thông đường bộ ........................................................................................................................ 5
Đường sắt .............................................................................................................................................................. 6
Nông nghiệp ......................................................................................................................................................... 7
Công nghệ thực phẩm .......................................................................................................................................... 7
Dầu mỏ và các công nghệ liên quan .................................................................................................................... 7
Xây dựng dân dụng .............................................................................................................................................. 8
Thiết bị gia dụng và thương mại giải trí. Thể thao .............................................................................................. 9
Tiêu chuẩn nước ngoài ........................................................................................................................................... 9
Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu ............................................................................................ 9
Dịch vụ. Tổ chức, quản lý và chất lượng công ty. Hành chính. Vận tải. Xã hội học ......................................... 9
Địa chất. Khí tượng. Thủy văn ........................................................................................................................... 10
Vi sinh vật ........................................................................................................................................................... 10
Thiết bị y tế ......................................................................................................................................................... 10
Nha khoa ............................................................................................................................................................. 11
Thiết bị bệnh viện ............................................................................................................................................... 11
Hỗ trợ người tàn tật và người khuyết tật ............................................................................................................ 11
Chất lượng đất .................................................................................................................................................... 11
Bảo vệ môi trường .............................................................................................................................................. 12
Chất thải .............................................................................................................................................................. 12
Chất lượng không khí ......................................................................................................................................... 12
An toàn lao động. Vệ sinh công nghiệp ............................................................................................................. 12
An toàn máy móc ............................................................................................................................................... 12
An toàn trong gia đình ........................................................................................................................................ 12
Phòng cháy ......................................................................................................................................................... 12
Phòng nổ ............................................................................................................................................................. 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 2/38
Phòng chống hàng nguy hiểm ............................................................................................................................ 14
Hệ thống cảnh báo và báo động ......................................................................................................................... 14
Thiết bị bảo vệ .................................................................................................................................................... 14
Đo lường và phép đo. Hiện tượng vật lý ........................................................................................................... 14
Thử nghiệm ......................................................................................................................................................... 15
Hệ thống và kết cấu cơ khí công dụng chung .................................................................................................... 16
Hệ thống và kết cấu chất lỏng công dụng chung ............................................................................................... 16
Chế tạo ................................................................................................................................................................ 18
Năng lượng và truyền nhiệt ................................................................................................................................ 18
Kỹ thuật điện ...................................................................................................................................................... 19
Điện tử ................................................................................................................................................................ 20
Viễn thông. Kỹ thuật âm thanh và hình ảnh ...................................................................................................... 22
Công nghệ thông tin ........................................................................................................................................... 23
Công nghệ ảnh .................................................................................................................................................... 26
Phương tiện giao thông đường bộ ...................................................................................................................... 26
Đường sắt ............................................................................................................................................................ 26
Đóng tàu và kết cấu tàu thủy .............................................................................................................................. 27
Kỹ thuật máy bay và tàu vũ trụ .......................................................................................................................... 27
Thiết bị xếp dỡ vật liệu ....................................................................................................................................... 29
Bao gói và phân phối hàng hóa .......................................................................................................................... 29
Công nghệ dệt may và da ................................................................................................................................... 29
May mặc ............................................................................................................................................................. 29
Nông nghiệp ....................................................................................................................................................... 30
Công nghệ thực phẩm ........................................................................................................................................ 30
Công nghệ hóa chất ............................................................................................................................................ 30
Khai thác mỏ và khoáng sản .............................................................................................................................. 31
Dầu mỏ và các công nghệ liên quan .................................................................................................................. 31
Luyện kim ........................................................................................................................................................... 32
Công nghệ chế biến gỗ ....................................................................................................................................... 33
Thủy tinh và gốm ............................................................................................................................................... 33
Cao su và chất dẻo .............................................................................................................................................. 33
Giấy ..................................................................................................................................................................... 34
Sơn và chất màu ................................................................................................................................................. 34
Vật liệu xây dựng và xây dựng nhà ................................................................................................................... 34
Xây dựng dân dụng ............................................................................................................................................ 36
Thiết bị gia dụng và thương mại giải trí. Thể thao ............................................................................................ 36
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 3/38
Tiêu chuẩn – Quy chuẩn – Văn bản kỹ thuật đo lường Việt Nam
Dịch vụ. Tổ chức, quản lý và chất lượng công ty. Hành chính.
Vận tải. Xã hội học Trở về đầu trang
1
TCVN ISO/IEC 17011:2017
Thay thế:TCVN ISO/IEC
17011:2007
Đánh giá sự phù hợp. Yêu cầu chung đối với tổ chức
công nhận các tổ chức đánh giá sự phù hợp 70
Thiên văn. Đo đạc. Địa lý Trở về đầu trang
2 TCVN 12154:2018 Thông tin địa lý. Khung dữ liệu ảnh, ô lưới và phủ 52
3 TCVN 12155:2018 Thông tin địa lý. Khuôn thức trao đổi dữ liệu địa lý 345
An toàn lao động. Vệ sinh công nghiệp Trở về đầu trang
4 QCVN 29:2016/BLĐTBXH Quy chuẩn kỹ thuật quốc gia đối về an toàn lao động
đối với cần trục 16
5 QCVN 30:2016/BLĐTBXH Quy chuẩn kỹ thuật quốc gia đối về an toàn lao động
đối với cần trục, cổng trục 11
Hệ thống và kết cấu cơ khí công dụng chung Trở về đầu trang
6 TCVN 11849-1:2017 Acquy chì-axit dùng cho truyền động kéo. Phần 1:
Yêu cầu chung và phương pháp thử 13
Công nghệ thông tin Trở về đầu trang
7 TCVN 11779:2017 Công nghệ thông tin. Các kỹ thuật an toàn. Hướng
dẫn đánh giá hệ thống quản lý an toàn thông tin 42
8 TCVN 11780:2017 Công nghệ thông tin. Các kỹ thuật an toàn. Hướng
dẫn về an toàn không gian mạng 74
9 TCVN 10176-8-1:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-1: Giao thức điều khiển thiết bị internet gateway.
Thiết bị internet gateway
21
10 TCVN 10176-8-10:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-10: Giao thức điều khiển thiết bị internet gateway.
Dịch vụ quản lý cấu hình host mạng cục bộ
33
11 TCVN 10176-8-11:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-11: Giao thức điều khiển thiết bị internet gateway.
Dịch vụ chuyển tiếp tầng 3
19
12 TCVN 10176-8-12:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-12: Giao thức điều khiển thiết bị internet gateway.
Dịch vụ xác thực liên kết
37
13 TCVN 10176-8-13:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-13: Giao thức điều khiển thiết bị internet gateway.
Dịch vụ radius từ máy trạm
19
14 TCVN 10176-8-2:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-2: Giao thức điều khiển thiết bị internet gateway.
Thiết bị mạng cục bộ
15
15 TCVN 10176-8-3:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-3: Giao thức điều khiển thiết bị internet gateway.
Thiết bị mạng diện rộng
17
16 TCVN 10176-8-4:2017
Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần
8-4: Giao thức điều khiển thiết bị internet gateway.
Thiết bị kết nối mạng diện rộng
18
17 TCVN 10176-8-5:2017 Công nghệ thông tin. Kiến trúc thiết bị UPnP. Phần 25
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 4/38
8-5: Giao thức điều khiển thiết bị internet gateway.
Thiết bị điểm truy cập mạng cục bộ không dây
18 TCVN 11778-1:2017
Công nghệ thông tin. Các kỹ thuật an toàn. Khung
cho đảm bảo an toàn công nghệ thông tin. Phần
1:Giới thiệu và khái niệm
66
19 TCVN 11778-2:2017
Công nghệ thông tin. Các kỹ thuật an toàn. Khung
cho đảm bảo an toàn công nghệ thông tin. Phần 2:
Phân tích
28
20 TCVN 12042:2017 Công nghệ thông tin. Các kỹ thuật an toàn. Ngữ
cảnh xác thực cho sinh trắc học 59
21 TCVN 12043:2017 Khuôn dạng dữ liệu trao đổi mô tả sự cố an toàn
mạng 93
22 TCVN 12044:2017 Các yêu cầu bảo mật DNS (DNSSEC) 20
Điện tử Trở về đầu trang
23 TCVN 11344-10:2017 Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 10: Sóc cơ học 6
24 TCVN 11344-14:2017
Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 14: Độ bền chắc của chân linh
kiện (tính nguyên vẹn của chân)
16
25 TCVN 11344-15:2017
Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 15:Khả năng chịu nhiệt độ hàn đối
với các linh kiện lắp xuyên qua lỗ
9
26 TCVN 11344-2:2017 Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 2: Áp suất không khí thấp 7
27 TCVN 11344-22:2017 Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 22: Độ bền của mối gắn 21
28 TCVN 11344-3:2017 Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 3: Kiểm tra bên ngoài bằng mắt 12
29 TCVN 11344-4:2017
Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 4: Thử nghiệm nóng ẩm, không
đổi, ứng suất tăng tốc cao
10
30 TCVN 11344-8:2017 Linh kiện bán dẫn. Phương pháp thử nghiệm cơ khí
và khí hậu. Phần 8: Gắn kín 16
31 TCVN 6749-2:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
2: Quy định kỹ thuật từng phần. Tụ điện không đổi
điện một chiều điện môi màng mỏng polyethylene
terephthalate phủ kim loại
29
32 TCVN 6749-2-1:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
2-1: Quy định kỹ thuật cụ thể còn để trống: Tụ điện
không đổi điện một chiều điện môi màng mỏng
polyethylene terephthalate phủ kim loại. Mức đánh
giá E và EZ
14
33 TCVN 6749-3:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
3: Quy định kỹ thuật từng phần. Tụ điện không đổi
điện phân tantalum gắn kết bề mặt có chất điện
phân rắn mangan dioxit
31
34 TCVN 6749-3-1:2017 Tụ điện không đổi dùng trong thiết bị điện tử. Phần
3-1: Quy định kỹ thuật cụ thể còn để trống. Tụ điện 16
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 5/38
không đổi điện phân tantalum gắn kết bề mặt có
chất điện phân rắn mangan dioxit. Mức đánh giá
EZ
35 TCVN 6749-4-1:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
4-1: Quy định kỹ thuật cụ thể còn để trống. Tụ điện
không đổi điện phân nhôm có chất điện phân không
rắn. Mức đánh giá EZ
17
36 TCVN 6749-4-2:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
4-2: Quy định kỹ thuật cụ thể còn để trống. Tụ điện
không đổi điện phân nhôm có chất điện phân rắn
mangan dioxit. Mức đánh giá EZ
17
37 TCVN 6749-8:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
8: Quy định kỹ thuật từng phần. Tụ điện không đổi
điện môi gốm, cấp 1
42
38 TCVN 6749-8-1:2017
Tụ điện không đổi dùng trong thiết bị điện tử. Phần
8-1: Quy định kỹ thuật cụ thể còn để trống: Tụ điện
không đổi điện môi gốm, cấp 1. Mức đánh giá EZ
42
Cơ học chính xác Trở về đầu trang
39 9 TCVN ISO 17034:2017 Thay
thế:TCVN 7366:2011
Yêu cầu chung về năng lực của nhà sản xuất mẫu
chuẩn 36
Phương tiện giao thông đường bộ Trở về đầu trang
40 TCVN 8606-1:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
1: Yêu cầu chung và định nghĩa
7
41 TCVN 8606-10:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
10: Bộ điều chỉnh lưu lượng khí
9
42 TCVN 8606-11:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
11: Bộ trộn nhiên liệu khí-không khí
9
43 TCVN 8606-12:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
12: Van an toàn
10
44 TCVN 8606-13:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
13: Thiết bị an toàn
19
45 TCVN 8606-14:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
14: Van quá dòng
9
46 TCVN 8606-15:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
15: Hộp gom khí và ống mềm thông hơi
9
47 TCVN 8606-2:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
2: Đặc tính kỹ thuật và phương pháp thử
16
48 TCVN 8606-3:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
3: Van kiểm tra
9
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 6/38
49 TCVN 8606-4:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
4: Van tay
9
50 TCVN 8606-5:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
5: Van tay của xy lanh
9
51 TCVN 8606-9:2017
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
9:Bộ áp điều khiển
11
52 TCVN 8606-6:2017 Thay
thế:TCVN 8606-6:2010
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
6: Van tự động
10
53 TCVN 8606-7:2017 Thay
thế:TCVN 8606-7:2010
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
7: Vòi phun khí
11
54 TCVN 8606-8:2017 Thay
thế:TCVN 8606-8:2010
Phương tiện giao thông đường bộ. Bộ phận của hệ
thống nhiên liệu khí thiên nhiên nén (CNG). Phần
8: Áp kế
9
55 QCVN 32:2017/BGTVT Quy chuẩn kỹ thuật quốc gia về kính an toàn của xe
ô tô 110
56 QCVN 34:2017/BGTVT Quy chuẩn kỹ thuật quốc gia về lốp hơi dùng cho ô
tô 40
Đường sắt Trở về đầu trang
57 TCVN 11852:2017 Ứng dụng đường sắt. Điện áp nguồn của hệ thống
sức kéo điện 23
58 TCVN 11853:2017 Ứng dụng đường sắt. Hệ thống lắp đặt điện cố định.
Mạch tiếp xúc trên không dùng cho sức kéo điện 116
59 TCVN 11854:2017
Ứng dụng đường sắt. Phương tiện giao thông đường
sắt. Thử nghiệm phương tiện giao thông đường sắt
có kết cấu hoàn chỉnh và trước khi đưa vào sử dụng
82
60 TCVN 12089:2017 Ứng dụng đường sắt. Thiết bị điện tử sử dụng trên
phương tiện giao thông đường sắt 53
61 TCVN 12090-1:2017 Ứng dụng đường sắt. Tương thích điện từ. Phần 1:
Tổng quan 13
62 TCVN 12090-2:2017
Ứng dụng đường sắt. Tương thích điện từ. Phần 2:
Độ phát xạ của hệ thống đường sắt ra môi trường
bên ngoài
28
63 TCVN 12090-3-1:2017
Ứng dụng đường sắt. Tương thích điện từ. Phần 3-1:
Phương tiện giao thông đường sắt. Đoàn tàu và
phương tiện
22
64 TCVN 12090-3-2:2017
Ứng dụng đường sắt. Tương thích điện từ. Phần 3-2:
Phương tiện giao thông đường sắt. Tổng thành thiết
bị
29
65 TCVN 12090-4:2017
Ứng dụng đường sắt. Tương thích điện từ. Phần 4:
Độ phát xạ điện từ và miễn nhiễm điện từ của thiết
bị tín hiệu và thông tin liên lạc
16
66 TCVN 12090-5:2017 Ứng dụng đường sắt. Tương thích điện từ. Phần 5:
Độ phát xạ điện từ và miễn nhiễm điện từ của trạm 18
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 7/38
cấp điện cố định và thiết bị
Nông nghiệp Trở về đầu trang
67 TCVN 12134:2017 Nông nghiệp hữu cơ. Yêu cầu đối với tổ chức chứng
nhận 42
Công nghệ thực phẩm Trở về đầu trang
68 TCVN 5107:2018 Thay
thế:TCVN 5107:2003 Nước mắm 12
Dầu mỏ và các công nghệ liên quan Trở về đầu trang
69 TCVN 12012 Sản phẩm dầu mỏ. Hướng dẫn sử dụng các bảng đo
lường dầu mỏ 18
70 TCVN 12013:2017
Sản phẩm dầu mỏ. Xác định benzen, toluen và tổng
các hydrocacbon thơm trong xăng thành phẩm bằng
sắc ký khí khối phổ (GC/MS)
32
71 TCVN 12014:2017 Nhiên liệu động cơ đánh lửa. Xác định hàm lượng
olefin tổng bằng phương pháp sắc ký khí đa chiều 21
72 TCVN 12015:2017
Nhiên liệu động cơ đánh lửa. Xác định các loại
hydrocacbon, các hợp chất oxygenat và benzen bằng
phương pháp sắc ký khí
30
73 TCVN 12016:2017
Nhiên liệu điêzen. Đánh giá độ bôi trơn bằng
chuyển động khứ hồi cao tần (hfrr). Quan sát bằng
mắt thường
17
74 TCVN 12045:2017 Phân tích khí. Xác định điểm sương theo nước của
khí thiên nhiên. Ẩm kế ngưng tụ bề mặt lạnh 12
75 TCVN 12046-3:2017
Khí thiên nhiên. Xác định các hợp chất lưu huỳnh.
Phần 3: Xác định hydro sulfua, lưu huỳnh
mercaptan và cacbonyl sulfua bằng phép đo điện thế
12
76 TCVN 12047-1:2017
Khí thiên nhiên. Xác định thành phần và độ không
đảm bảo kèm theo bằng phương pháp sắc ký khí.
Phần 1: Hướng dẫn chung và tính toán thành phần
54
77 TCVN 12047-2:2017
Khí thiên nhiên. Xác định thành phần và độ không
đảm bảo kèm theo bằng phương pháp sắc ký khí.
Phần 2: Tính độ không đảm bảo
21
78 TCVN 12047-3:2017
Khí thiên nhiên. Xác định thành phần và độ không
đảm bảo kèm theo bằng phương pháp sắc ký khí.
Phần 3: Xác định hydro, heli, oxy, nitơ,
cacbondioxit và các hydrocacbon lên đến C8 sử
dụng hai cột nhồi
19
79 TCVN 12047-4:2017
Khí thiên nhiên. Xác định thành phần và độ không
đảm bảo kèm theo bằng phương pháp sắc ký khí.
Phần 4: Xác định nitơ, cacbondioxit và các
hydrocacbon từ C1 đến C8 và C6+ đối với hệ thống
đo phòng thử nghiệm và đo trực tuyến sử dụng hai
cột
19
80 TCVN 12047-5:2017
Khí thiên nhiên. Xác định thành phần và độ không
đảm bảo kèm theo bằng phương pháp sắc ký khí.
Phần 5: Phương pháp đẳng nhiệt đối với nitơ,
cacbon dioxit, các hydrocacbon C1 đến C5 và các
hydrocacbon C6+
29
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 8/38
81 TCVN 12047-6:2017
Khí thiên nhiên. Xác định thành phần và độ không
đảm bảo kèm theo bằng phương pháp sắc ký khí.
Phần 6: Xác định hydro, heli, oxy, nitơ, cacbon
dioxit và các hydrocacbon C1 đến C8 sử dụng ba cột
mao quản
21
82 TCVN 12048:2017 Khí thiên nhiên. Điểm sương theo hydrocacbon và
hàm lượng hydrocacbon 26
83 TCVN 12049:2017 Khí thiên nhiên. Yêu cầu chung về chất lượng 57
84 TCVN 12050:2017 Khí thiên nhiên. Xác định các tính chất. Nhiệt trị và
chỉ số wobbe 63
85 TCVN 12051-1:2017
Khí thiên nhiên. Khí thiên nhiên nén sử dụng làm
nhiên liệu cho phương tiện giao thông đường bộ.
Phần 1: Yêu cầu chung về chất lượng
31
86 TCVN 12051-2:2017
Khí thiên nhiên. Khí thiên nhiên nén sử dụng làm
nhiên liệu cho phương tiện giao thông đường bộ.
Phần 2: Quy định kỹ thuật
8
87 TCVN 6170-1:2017 Thay
thế:TCVN 6170-1:1996 Giàn cố định trên biển. Phần 1: Quy định chung 23
88 TCVN 6170-2:2017 Thay
thế:TCVN 6170-2:1996
Giàn cố định trên biển. Phần 2: Điều kiện và tải
trọng môi trường 167
89 TCVN 6170-3:2017 Thay
thế:TCVN 6170-3:1998 Giàn cố định trên biển. Phần 3: Tải trọng thiết kế 33
90 TCVN 6170-4:2017 Thay
thế:TCVN 6170-4:1998 Giàn cố định trên biển. Phần 4: Thiết kế kết cấu thép 85
91 TCVN 6223:2017 Thay
thế:TCVN 6223:2011
Cửa hàng khí dầu mỏ hóa lỏng (LGP). Yêu cầu
chung về an toàn 10
Xây dựng dân dụng Trở về đầu trang
92 TCVN 11823-1:2017 Thiết kế cầu đường bộ. Phần 1: Yêu cầu chung 11
93 TCVN 11823-10:2017 Thiết kế cầu đường bộ. Phần 10: Nền móng 151
94 TCVN 11823-11:2017 Thiết kế cầu đường bộ. Phần 11: Mố, trụ và tường
chắn 72
95 TCVN 11823-12:2017 Thiết kế cầu đường bộ. Phần 12: Kết cấu vùi và áo
hầm 84
96 TCVN 11823-13:2017 Thiết kế cầu đường bộ. Phần 13: Lan can 29
97 TCVN 11823-14:2017 Thiết kế cầu đường bộ. Phần 14: Khe co giãn và gói
cầu 65
98 TCVN 11823-2:2017 Thiết kế cầu đường bộ. Phần 2: Tổng thể và đặc
điểm vị trí 27
99 TCVN 11823-3:2017 Thiết kế cầu đường bộ. Phần 3: Tải trọng và hệ số
tải trọng 98
100 TCVN 11823-4:2017 Thiết kế cầu đường bộ. Phần 4: Phân tích và đánh
giá kết cấu 80
101 TCVN 11823-5:2017 Thiết kế cầu đường bộ. Phần 5: Kết cấu bê tông 193
102 TCVN 11823-6:2017 Thiết kế cầu đường bộ. Phần 6: Kết cấu thép 244
103 TCVN 11823-9:2017 Thiết kế cầu đường bộ. Phần 9: Mặt cầu và hệ mặt
cầu 30
104 TCVN 12111:2018 Móng cọc vít có cánh đơn ở mũi. Yêu cầu thi công 63
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 9/38
và nghiệm thu
Thiết bị gia dụng và thương mại giải trí. Thể thao Trở về đầu trang
105 TCVN 11920:2017 Máy giặt gia dụng - Hiệu quả sử dụng nước 9
Tiêu chuẩn nước ngoài
Vấn đề chung. Thuật ngữ. Tiêu chuẩn hóa. Tư liệu Trở về đầu trang
106 EN ISO 22300:2018 Security and resilience - Vocabulary (ISO
22300:2018) 3
107 DIN 31636:2018 Information and documentation - Romanization of
the Hebrew alphabet 14
108 DIN 32701:2018 Information and Documentation - Effectiveness of
paper deacidification processes 25
109 DIN 33904:2018 Information and documentation - Romanization
Devanagari 27
110 JIS S 0012:2018 Accessible design - Accessibility requirements for
consumer products 14
111 JIS S 0043:2018
Accessible design - Considerations for preparation
of instructions for use of consumer products used by
persons with visual impairment
10
112 JIS Z 0110:2018 Glossary of terms for industrial racks 26
113 JIS Z 3001-1:2018 Welding and allied processes - Vocabulary - Part 1:
General 44
114 JIS Z 3001-2:2018 Welding and allied processes - Vocabulary - Part 2:
Welding processes 20
115 JIS Z 3001-7:2018 Welding and allied processes - Vocabulary - Part 7:
Arc welding 36
Dịch vụ. Tổ chức, quản lý và chất lượng công ty. Hành chính.
Vận tải. Xã hội học Trở về đầu trang
116 ISO/IEC TS 17021-10:2018
Conformity assessment - Requirements for bodies
providing audit and certification of management
systems - Part 10: Competence requirements for
auditing and certification of occupational health and
safety management systems
9
117 ASTM E2862-18:2018
Replaces: ASTM E2862-12
Standard Practice for Probability of Detection
Analysis for Hit/Miss Data 14
118 DIN EN 60300-3-4:2018
Dependability management - Part 3-4: Application
guide - Guide to the specification of dependability
requirements (IEC 56/1726/CD:2017); Text in
German and English
102
119 JIS Q 9002:2018 Quality management systems - Guidelines for the
application of JIS Q 9001 56
120 JIS Z 8462-6:2018
Capability of detection - Part 6: Methodology for
the determination of the critical value and the
minimum detectable value in Poisson distributed
measurements by normal approximations
28
121 JIS Z 8462-7:2018 Capability of detection - Part 7: Methodology based
on stochastic properties of instrumental noise 26
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 10/38
Địa chất. Khí tượng. Thủy văn Trở về đầu trang
122 DIN 50014:2018 Standard atmospheres for conditioning and/or testing
- Specifications 7
Vi sinh vật Trở về đầu trang
123 ISO 6888-1 FDAM 2:2018
Microbiology of food and animal feeding stuffs -
Horizontal method for the enumeration of coagulase-
positive staphylococci (Staphylococcus aureus and
other species) - Part 1: Technique using Baird-Parker
agar medium - Amendment 2: Inclusion of an
alternative confirmation test using RPFA stab
method
5
124 ISO/FDIS 18593:2018 Microbiology of the food chain - Horizontal methods
for surface sampling 11
125 EN ISO 6888-1/FprA2:2018
Microbiology of food and animal feeding stuffs -
Horizontal method for the enumeration of coagulase-
positive staphylococci (Staphylococcus aureus and
other species) - Part 1: Technique using Baird-Parker
agar medium - Amendment 2: Inclusion of an
alternative confirmation procedure (ISO 6888-
1:1999/FDAM 2:2018)
1
126 EN ISO 11133:2014/A1:2018
Microbiology of food, animal feed and water -
Preparation, production, storage and performance
testing of culture media - Amendment 1 (ISO
11133:2014/Amd 1:2018)
3
127 FprEN ISO 18593 Microbiology of the food chain - Horizontal methods
for surface sampling (ISO/FDIS 18593:2018) 1
128 JIS Z 2911:2018 Methods of test for fungus resistance 38
Thiết bị y tế Trở về đầu trang
129 IEC 60601-2-76:2018
Medical electrical equipment - Part 2-76: Particular
requirements for the basic safety and essential
performance of low energy ionized gas haemostasis
equipment
53
130 IEC 60601-2-39:2018
Medical electrical equipment - Part 2-39: Particular
requirements for basic safety and essential
performance of peritoneal dialysis equipment
57
131 IEC 60601-2-39:2018 RLV
Medical electrical equipment - Part 2-39: Particular
requirements for basic safety and essential
performance of peritoneal dialysis equipment
86
132 ASTM F3260 -18:2018
Replaces: ASTM F3260-17
Standard Test Method for Determining the Flexural
Stiffness of Medical Textiles 6
133 EN 60601-2-43/prA2:2018 Amendment 2 - Medical electrical equipment - Part
2-43: Particular requirements 53
134 DIN 13097-4:2018 Hypodermic needles - Part 4: Point geometry,
requirements and testing 22
135 DIN EN 13718-1/A1:2018
Medical vehicles and their equipment - Air
ambulances - Part 1: Requirements for medical
devices used in air ambulances; German and
English version EN 13718-1:2014/prA1:2018
21
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 11/38
136 DIN EN 13718-2/A1:2018
Medical vehicles and their equipment - Air
ambulances - Part 2: Operational and technical
requirements for air ambulances; German and
English version EN 13718-2:2015/prA1:2018
23
137 DIN EN 60601-2-1#VDE
0750-2-1:2018
Medical electrical equipment - Part 2-1: Particular
requirements for the basic safety and essential
performance of electron accelerators in the range 1
MeV to 50 MeV (IEC 62C/700/CDV:2017);
German and English version prEN 60601-2-1:2017
216
138 DIN EN 60601-2-66#VDE
0750-2-66:2018
Medical electrical equipment - Part 2-66: Particular
requirements for the basic safety and essential
performance of hearing instruments and hearing
instrument systems (IEC 29/966/CD:2017); Text in
German and English
90
139 JIS T 0403:2018 Method for in vitro thrombogenicity testing for
inflow cannula of left ventricular assist system 12
140 JIS T 1115:2018 Non-invasive electro-mechanical
sphygmomanometers 54
141 JIS T 3218:2018 Central venous catheters 24
142 JIS T 3228:2018 Biopsy needles for single use 12
143 JIS T 3265:2018 Sterile extension tubes for single use 12
144 JIS T 3268:2018 Sterile, single-use intravascular catheters 34
145 JIS T 3320:2018 Sterile stopcocks for single use 10
146 JIS T 3322:2018 Sterile single use anesthesia filters for use with
epidural catheter 10
147 JIS T 4206:2018 Clinical glass thermometers with maximum device 20
148 JIS T 7209:2018
Medical electrical equipment - Particular
requirements for basic safety and essential
performance of oxygen concentrator equipment
48
Nha khoa Trở về đầu trang
149 JIS T 5702:2018 Dentistry - Dental units - Air, water, suction and
wastewater systems 28
150 JIS T 6006:2018 Dentistry - Test Method for Determining Radio-
Opacity of Materials 10
Thiết bị bệnh viện Trở về đầu trang
151 JIS T 1022:2018 Safety requirements of electrical installations for
medically used rooms in hospitals and clinics 36
Hỗ trợ người tàn tật và người khuyết tật Trở về đầu trang
152 JIS T 9209:2018 Test methods for six-wheel electric wheelchairs 14
153 JIS T 9282:2018 Assistive products - Fixed type handrails and grab
bars 18
154 JIS T 9283:2018 Assistive products - Cramp and thrust type handrails
and grab bars 20
Chất lượng đất Trở về đầu trang
155 ISO/DIS 23611-3:2018 Soil quality - Sampling of soil invertebrates - Part 3:
Sampling and extraction of enchytraeids 18
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 12/38
Bảo vệ môi trường Trở về đầu trang
156 ASTM E3027-18a:2018
Replaces: ASTM E3027-18
Standard Guide for Making Sustainability-Related
Chemical Selection Decisions in the Life-Cycle of
Products
7
157 prEN ISO 14005
Environmental management systems - Guidelines for
a flexible approach to phased implementation
(ISO/DIS 14005:2018)
1
Chất thải Trở về đầu trang
158 DIN 19659:2018
Characterization of solids - Quality assurance and
quality control - Re-transferability of measurement
results to the characteristic distribution in the
population
98
159 DIN EN 13071-1:2018
Stationary waste containers up to 5000 l, top lifted
and bottom emptied - Part 1: General requirements;
German and English version prEN 13071-1:2018
50
160 DIN EN 13071-2:2018
Stationary waste containers up to 5000 l, top lifted
and bottom emptied - Part 2: Additional requirements
for underground or partly underground systems;
German and English version prEN 13071-2:2018
32
161 DIN EN 16192:2018 Waste - Analysis of eluates; German and English
version prEN 16192:2018 72
162 DIN CLC/TS 50625-3-
5#VDE V 0042-13-35:2018
Collection, logistics & Treatment requirements for
WEEE - Part 3-5: Technical specification for de-
pollution - Photovoltaic panels; German version
CLC/TS 50625-3-5:2017
20
Chất lượng không khí Trở về đầu trang
163 DIN EN 17255-1:2018
Stationary source emissions - Data acquisition and
handling systems - Part 1: Specification of
requirements for the handling and reporting of data;
German and English version prEN 17255-1:2018
88
164 JIS B 7996:2018
Performance evaluation test method of automated
concentration monitoring instrument of dust in flue
gas
28
An toàn lao động. Vệ sinh công nghiệp Trở về đầu trang
165 ISO 45001:2018 Occupational health and safety management systems
- Requirements with guidance for use 41
An toàn máy móc Trở về đầu trang
166 IEC 62046:2018 Safety of machinery - Application of protective
equipment to detect the presence of persons 91
An toàn trong gia đình Trở về đầu trang
167 JIS C 9335-2-32:2018
Household and similar electrical appliances - Safety -
Part 2-32: Particular requirements for massage
appliances
16
Phòng cháy Trở về đầu trang
168 IEC 60331-1:2018 Tests for electric cables under fire conditions -
Circuit integrity - Part 1: Test method for fire with
shock at a temperature of at least 830°C for cables of
27
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 13/38
rated voltage up to and including 0,6/1,0 kV and with
an overall diameter exceeding 20 mm
169 IEC 60331-1:2018 RLV
Tests for electric cables under fire conditions -
Circuit integrity - Part 1: Test method for fire with
shock at a temperature of at least 830°C for cables of
rated voltage up to and including 0,6/1,0 kV and with
an overall diameter exceeding 20 mm
54
170 IEC 60331-2:2018
Tests for electric cables under fire conditions -
Circuit integrity - Part 2: Test method for fire with
shock at a temperature of at least 830°C for cables of
rated voltage up to and including 0,6/1,0 kV and with
an overall diameter not exceeding 20mm
25
171 IEC 60331-2:2018 RLV
Tests for electric cables under fire conditions -
Circuit integrity - Part 2: Test method for fire with
shock at a temperature of at least 830°C for cables of
rated voltage up to and including 0,6/1,0 kV and with
an overall diameter not exceeding 20mm
51
172 IEC 60331-3:2018
Tests for electric cables under fire conditions -
Circuit integrity - Part 3: Test method for fire with
shock at a temperature of at least 830°C for cables of
rated voltage up to and including 0,6/1,0 kV tested in
a metal enclosure
26
173 IEC 60331-3:2018 RLV
Tests for electric cables under fire conditions -
Circuit integrity - Part 3: Test method for fire with
shock at a temperature of at least 830°C for cables of
rated voltage up to and including 0,6/1,0 kV tested in
a metal enclosure
52
174 FprEN 15004-1
Fixed firefighting systems - Gas extinguishing
systems - Part 1: Design, installation and
maintenance (ISO 14520-1:2015, modified)
115
175 DIN 14675-1:2018 Fire detection and fire alarm systems - Part 1: Design
and operation 80
176 DIN 14675-2:2018 Fire detection and fire alarm systems - Part 2:
Requirements to the specialised company 11
177 DIN EN 1363-1:2018 Fire resistance tests - Part 1: General requirements;
German and English version prEN 1363-1:2018 114
178 DIN EN 1634-1:2018
Fire resistance and smoke control tests for door and
shutter assemblies, openable windows and elements
of building hardware - Part 1: Fire resistance test for
door and shutter assemblies and openable windows;
German version EN 1634-1:2014+A1:2018
81
179 DIN EN 60695-11-2#VDE
0471-11-2:2018
Fire hazard testing - Part 11-2: Test flames - 1 kW
nominal pre-mixed flame - Apparatus, confirmatory
test arrangement and guidance (IEC 60695-11-
2:2017); German version EN 60695-11-2:2017
25
180 JIS C 60695-10-2:2018 Fire hazard testing - Part 10-2: Abnormal heat - Ball
pressure test method 12
181 JIS C 60695-11-20:2018 Fire hazard testing - Part 11-20: Test flames - 500 W 26
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 14/38
flame test method
Phòng nổ Trở về đầu trang
182 DIN EN 14460:2018 Explosion resistant equipment; German version EN
14460:2018 37
Phòng chống hàng nguy hiểm Trở về đầu trang
183 DIN EN 13922:2018
Tanks for transport of dangerous goods - Service
equipment for tanks - Overfill prevention systems for
liquid fuels; German and English version prEN
13922:2018
71
Hệ thống cảnh báo và báo động Trở về đầu trang
184 DIN CLC/TS 50661-1#VDE
V 0830-100-1:2018
Alarm systems - External perimeter security systems
- Part 1: System requirements; German version
CLC/TS 50661-1:2017
46
Thiết bị bảo vệ Trở về đầu trang
185 ASTM F2879 -18:2018
Replaces: ASTM F2879-16
Standard Specification for Eye Protective Devices for
Airsoft Sports 11
186 FprEN 13832-3 Footwear protecting against chemicals - Part 3:
Requirements for prolonged contact with chemicals 22
187 DIN EN 13158:2018
Protective clothing - Protective jackets, body and
shoulder protectors for equestrian use, for horse
riders and those working with horses, and for horse
drivers - Requirements and test methods; German
version EN 13158:2018
48
188 DIN EN 13274-7:2018
Respiratory protective devices - Methods of test -
Part 7: Determination of particle filter Penetration;
German and English version prEN 13274-7:2018
28
Đo lường và phép đo. Hiện tượng vật lý Trở về đầu trang
189 IEC 62055-41:2018
Electricity metering - Payment systems - Part 41:
Standard transfer specification (STS) - Application
layer protocol for one-way token carrier systems
257
190 IEC 62055-41:2018 RLV
Electricity metering - Payment systems - Part 41:
Standard transfer specification (STS) - Application
layer protocol for one-way token carrier systems
386
191 IEC 62828-3:2018
Reference conditions and procedures for testing
industrial and process measurement transmitters -
Part 3: Specific procedures for temperature
transmitters
28
192
ASTM E235/E235M-12:2018
Replaces: ASTM
E235/E235M-12
Standard Specification for Type K and Type N
Mineral-Insulated, Metal-Sheathed Thermocouples
for Nuclear or for Other High-Reliability
Applications
6
193
ASTM E452-02:2018
Replaces: ASTM E452-
02(2013)
Standard Test Method for Calibration of Refractory
Metal Thermocouples Using a Radiation
Thermometer
14
194 ASTM F1797-18:2018
Replaces: ASTM F1797-15
Standard Test Method for Acoustic Emission Testing
of Insulated and Non-Insulated Digger Derricks 9
195 DIN 5033-9:2018 Colorimetry - Part 9: Reflectance standard for 12
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 15/38
calibration in colorimetry and photometry
196 DIN 16003:2018
Mechanical pressure and temperature gauges -
Differential pressure gauges - Dimensions,
metrology, requirements and testing
24
197 DIN 32937:2018
Control of inspection, measuring and test equipment
- Planning, management and use of inspection,
measuring and test equipment
23
198 DIN 45689-1:2018 Acoustics - Determination of aircraft noise exposure
at airfields - Part 1: Calculation method 68
199 DIN EN 50332-3:2018
Sound system equipment: headphones and earphones
associated with personal music players - maximum
sound pressure level measurement methodology -
Part 3: measurement method for sound dose
management; German version EN 50332-3:2017
15
200 JIS B 7414:2018 Glass thermometers 42
201 JIS B 7507/ERRATUM
1:2018 Vernier, dial and digital callipers; ERRATUM 1
202 JIS B 7512:2018 Steel tape measures 12
203 JIS B 7517:2018 Vernier, dial and digital height gauges 30
204 JIS B 7518:2018 Vernier, dial and digital depth gauges 24
205 JIS B 7522:2018 Textile tape measures 10
206 JIS B 7525-1:2018 Hydrometers - Part 1: Density hydrometers 34
207 JIS B 7525-2:2018 Hydrometers - Part 2: Liquefied petroleum gases
density hydrometers 24
208 JIS B 7525-3:2018 Hydrometers - Part 3: Specific gravity meters 32
209 JIS C 1302:2018 Insulation resistance testers 34
210 JIS C 2139-3-1:2018
Dielectric and resistive properties of solid insulating
materials - Part 3-1: Determination of resistive
properties (DC methods) - Volume resistance and
volume resistivity
20
211 JIS C 2139-3-2:2018
Dielectric and resistive properties of solid insulating
materials - Part 3-2: Determination of resistive
properties (DC methods) - Surface resistance and
surface resistivity
20
212 JIS C 2139-3-3:2018
Dielectric and resistive properties of solid insulating
materials - Part 3-3: Determination of resistive
properties (DC methods) - Insulation resistance18
18
213 JIS C 61340-4-9:2018 Electrostatics - Part 4-9: Standard test methods for
specific applications - Garments 20
214 JIS K 0972:2018 Piston dispenser 28
215 TS B 0034-1 Fuel oil flow meters - Measuring instruments used in
transfer or certification - Part 1: Fuel oil flow meters 58
216 TS B 0034-2
Fuel oil flow meters - Measuring instruments used in
transaction or certification - Part 2: Mobile type fuel
oil flow meters
28
Thử nghiệm Trở về đầu trang
217 IEC 60068-2-5:2018 Environmental testing - Part 2-5: Tests - Test S: 24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 16/38
Simulated solar radiation at ground level and
guidance for solar radiation testing and weathering
218 IEC 60068-2-5:2018 RLV
Environmental testing - Part 2-5: Tests - Test S:
Simulated solar radiation at ground level and
guidance for solar radiation testing and weathering
54
219 IEC 60068-2:2018 SER Environmental testing - Part 2: Tests - ALL PARTS 2288
220 ASTM E691-18:2018
Replaces: ASTM E691-16
Standard Practice for Conducting an Interlaboratory
Study to Determine the Precision of a Test Method 22
221 JIS C 60068-3-13:2018 Environmental testing - Part 3-13: Supporting
documentation and guidance on Test T - Soldering 26
222 JIS Z 2319:2018 Methods for magnetic flux leakage testing 20
223 JIS Z 4560:2018 Apparatus for industrial gamma radiography 38
224 JIS Z 8827-1:2018 Particle size analysis - Image analysis methods -
Part 1: Static image analysis methods 26
225 JIS Z 8837:2018 Determination of density by volumetric
displacement - Skeleton density by gas pycnometry 12
Hệ thống và kết cấu cơ khí công dụng chung Trở về đầu trang
226
ASTM F204-76:2018
Replaces: ASTM F204-
76(2013)
Standard Test Method for Surface Flaws in Tungsten
Seal Rod and Wire 2
227 DIN 580:2018 Lifting eye bolts 16
228 DIN 582:2018 Lifting eye nuts 14
229 DIN 34810:2018 Plastic hexagon head screws 10
230 JIS B 1217:2018 Bolting for use with pipe flanges 42
231 JIS B 8032-7:2018:2018 Internal combustion engines - Small diameter piston
rings - Part 7: Rectangular rings made of steel 24
232 JIS B 8032-8:2018 Internal combustion engines - Small diameter piston
rings - Part 8: Scraper rings made of cast iron 24
233 JIS B 8032-9:2018 Internal combustion engines - Small diameter piston
rings - Part 9: Keystone rings made of cast iron 28
234 JIS B 8032-13:2018 Internal combustion engines - Small diameter piston
rings - Part 13: Expander/segment oil control rings 22
Hệ thống và kết cấu chất lỏng công dụng chung Trở về đầu trang
235 ISO 6162-2:2018
Hydraulic fluid power - Flange connections with
split or one-piece flange clamps and metric or inch
screws - Part 2: Flange connectors, ports and
mounting surfaces for use at a pressure of 42 MPa
(420 bar), DN 13 to DN 76
21
236 ISO 11297-1:2018
Plastics piping systems for renovation of
underground drainage and sewerage networks under
pressure - Part 1: General
16
237 ISO 11298-1:2018 Plastics piping systems for renovation of
underground water supply networks - Part 1: General 16
238 ASTM F645-18a:2018
Replaces: ASTM F645-18
Standard Guide for Selection, Design, and
Installation of Thermoplastic Water- Pressure Piping
Systems
13
239 ASTM F1173-01:2018 Standard Specification for Thermosetting Resin 15
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 17/38
Replaces: ASTM F1173-
01(2012)
Fiberglass Pipe Systems to Be Used for Marine
Applications
240
ASTM F1311-90:2018
Replaces: ASTM F1311-
90(2012)
Standard Specification for Large#x2013;Diameter
Fabricated Carbon Steel Flanges 3
241
ASTM F1330-91:2018
Replaces: ASTM F1330-
91(2012)
Standard Guide for Metallic Abrasive Blasting to
Descale the Interior of Pipe 3
242
ASTM B111/B111M-18:2018
Replaces: ASTM
B111/B111M-16
Standard Specification for Copper and Copper-Alloy
Seamless Condenser Tubes and Ferrule Stock 12
243 EN 13445-3/FprA5:2018 Unfired pressure vessels - Part 3: Design 32
244 EN 13445-6/FprA2:2018
Unfired pressure vessels - Part 6: Requirements for
the design and fabrication of pressure vessels and
pressure parts constructed from spheroidal graphite
cast iron
7
245 EN 13480-2/FprA1:2018 Metallic industrial piping - Part 2: Materials 10
246 EN 13480-2/FprA2:2018 Metallic industrial piping - Part 2: Materials 7
247 EN 13480-2/FprA3:2018 Metallic industrial piping - Part 2: Materials 4
248 EN ISO 3183/A1:2018
Petroleum and natural gas industries - Steel pipe for
pipeline transportation systems - Amendment 1 (ISO
3183:2012/Amd 1:2017)
3
249 EN ISO 10619-1:2018
Rubber and plastics hoses and tubing - Measurement
of flexibility and stiffness - Part 1: Bending tests at
ambient temperature (ISO 10619-1:2017)
3
250 DIN 3535-6:2018
Gaskets for gas supply - Part 6: Gasket material
based on fibres, graphite or polytetrafluoroethylene
(PTFE) for gas valves, gas appliances and gas mains
11
251 DIN 30652-1:2018 Excess flow valves - Part 1: Excess flow valves for
gas installation 33
252 DIN EN 1401-1:2018
Plastics piping systems for non-pressure
underground drainage and sewerage - Unplasticized
poly(vinyl chloride) (PVC-U) - Part 1: Specifications
for pipes, fittings and the System; German and
English version prEN 1401-1:2018
80
253 DIN EN 16125:2018
LPG Equipment and Accessories - Pipework systems
and supports - LPG in liquid phase and vapour
pressure phase; German and English version prEN
16125:2018
85
254 JIS B 2404:2018 Dimensions of gaskets for use with pipe flanges 32
255 JIS G 3458:2018 Alloy steel pipes 22
256 JIS G 3460:2018 Steel pipes for low temperature service 22
257 API 510 + ADD1 + ADD2 Pressure Vessel Inspection Code: In-service
Inspection, Rating, Repair, and Alteration 81
258 API TR 17TR 8 High-pressure High-temperature Design Guidelines 112
259 API 510 ADD 2 Pressure Vessel Inspection Code: In-service
Inspection, Rating, Repair, and Alteration; 3
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 18/38
Addendum 2
Chế tạo Trở về đầu trang
260 ISO/FDIS 3315:2018
Assembly tools for screws and nuts - Driving parts
for hand-operated square drive socket wrenches -
Dimensions and tests
6
261 ISO/FDIS 3316:2018
Assembly tools for screws and nuts - Attachments for
hand-operated square drive socket wrenches -
Dimensions and tests
7
262 FprEN 560 Gas welding equipment - Hose connections for
equipment for welding, cutting and allied processes 12
263 EN IEC 60519-12:2018
Safety in installations for electroheating and
electromagnetic processing - Part 12: Particular
requirements for infrared electroheating (IEC 60519-
12:2016)
3
264 EN ISO 2819:2018
Metallic coatings on metallic substrates -
Electrodeposited and chemically deposited coatings -
Review of methods available for testing adhesion
(ISO 2819:2017)
3
265 prEN ISO 8289-2
Vitreous and porcelain enamels - Low-voltage test for
detecting and locating defects - Part 2: Slurry test for
profile surfaces (ISO/DIS 8289-2:2018)
1
266 DIN EN 60519-6#VDE 0721-
6:2018
Safety in installations for electroheating and
electromagnetic processing - Part 6: Particular
requirements for microwave equipment (IEC
27/1049/CD:2017); Text in German and English
74
267 JIS H 8453 Measurement method for thermal conductivity of
thermal barrier coatings 28
Năng lượng và truyền nhiệt Trở về đầu trang
268 ISO/FDIS 19443
Quality management systems - Specific requirements
for the application of ISO 9001:2015 by
organizations in the supply chain of the nuclear
energy sector supplying products and services
important to nuclear safety (ITNS)
43
269 IEC 60709:2018
Nuclear power plants - Instrumentation, control and
electrical power systems important to safety –
Separation
96
270 DIN 4759:2018
Process heat installations for more than one kind of
energy - One boiler for solid fuel and one for oil or
gas and only one chimney - Safety requirements and
tests
20
271 DIN EN 378-1:2018
Refrigerating systems and heat pumps - Safety and
environmental requirements - Part 1: Basic
requirements, definitions, classification and selection
criteria; German version EN 378-1:2016
74
272 DIN EN 378-2:2018
Refrigerating systems and heat pumps - Safety and
environmental requirements - Part 2: Design,
construction, testing, marking and documentation;
German version EN 378-2:2016
88
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 19/38
273 DIN EN 60904-9#VDE 0126-
4-9:2018
Photovoltaic devices - Part 9: Solar simulator
performance requirements (IEC 82/1324/CD:2017);
Text in German and English
46
274 JIS B 8124:2018 Requirements of the components of the gas engine
driven cogeneration package 18
275 JIS C 9901/AMENDMENT
1:2018
Methods of calculation and representation of energy
efficiency standard achievement percentage of
electrical and electronic appliances (Amendment 1)
1
Kỹ thuật điện Trở về đầu trang
276 IEC 62386-222:2018
Digital addressable lighting interface - Part 222:
Particular requirements for control gear - Thermal
lamp protection (device type 21)
29
277 IEC 62386-333:2018
Digital addressable lighting interface - Part 333:
Particular requirements for control devices - Manual
configuration (feature type 33)
24
278 IEC TR 61340-5-2:2018 Electrostatics - Part 5-2: Protection of electronic
devices from electrostatic phenomena - User guide 93
279 IEC TR 61340-5-2:2018 RLV Electrostatics - Part 5-2: Protection of electronic
devices from electrostatic phenomena - User guide 194
280 IEC TR 63114:2018 Electrical steel - Reverse bend test method of
electrical steel strip and sheet 16
281
ASTM F219-96:2018
Replaces: ASTM F219-
96(2013)
Standard Test Methods of Testing Fine Round and
Flat Wire for Electron Devices and Lamps 3
282 ASTM F458-13:2018
Replaces: ASTM F458-13
Standard Practice for Nondestructive Pull Testing of
Wire Bonds 3
283 ASTM F459-13:2018
Replaces: ASTM F459-13
Standard Test Methods for Measuring Pull Strength
of Microelectronic Wire Bonds 5
284 ASTM F487-13:2018
Replaces: ASTM F487-13
Standard Specification for Fine
Aluminum#x2013;1#x2009;% Silicon Wire for
Semiconductor Lead-Bonding
4
285 DIN 50451-7:2018
Testing of materials for semiconductor technology -
Determination of traces of elements in liquids - Part
7: Determination of 31 elements in high-purity
hydrochloric acid by ICP-MS
14
286 DIN EN 50180-3/A1:2018
Bushings above 1 kV up to 52 kV and from 250 A to
3,15 kA for liquid filled transformers - Part 3:
Requirements for bushing fixations; German version
EN 50180-3:2015/A1:2017
7
287 DIN EN 50562#VDE 0115-
562:2018
Railway applications - Fixed installations - Process,
protective measures and demonstration of safety for
electric traction systems; German version EN
50562:2018
82
288 DIN EN 60079-13#VDE
0170-313:2018
Explosive atmospheres - Part 13: Equipment
protection by pressurized room "p" and artificially
ventilated room "v" (IEC 60079-13:2017); German
version EN 60079-13:2017
42
289 DIN EN 60079-30-1#VDE Explosive atmospheres - Part 30-1: Electrical 75
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 20/38
0170-30-1:2018 resistance trace heating - General and testing
requirements (IEC/IEEE 60079-30-1:2015,
modified); German version EN 60079-30-1:2017
290 DIN EN 60079-30-2#VDE
0170-30-2:2018
Explosive atmospheres - Part 30-2: Electrical
resistance trace heating - Application guide for
design, installation and maintenance (IEC/IEEE
60079-30-2:2015, modified); German version EN
60079-30-2:2017
73
291 DIN EN 60086-1#VDE 0509-
86-1:2018
Primary batteries - Part 1: General (IEC
35/1376/CD:2017); Text in German and English 95
292 DIN EN 60086-2#VDE 0509-
86-2:2018
Primary batteries - Part 2: Physical and electrical
specifications (IEC 35/1378/CD:2017); Text in
German and English
114
293 DIN EN 60309-1#VDE 0623-
1:2018
Plugs, socket-outlets and couplers for industrial
purposes - Part 1: General requirements (IEC
23H/391A/CD:2017); Text in German and English
173
294 DIN EN 60309-2#VDE 0623-
2:2018
Plugs, socket-outlets and couplers for industrial
purposes - Part 2: Dimensional interchangeability
requirements for pin and contact-tube accessories
(IEC 23H/392A/CD:2017); Text in German and
English
164
295 DIN EN 60309-4#VDE 0623-
3:2018
Plugs, socket-outlets and couplers for industrial
purposes - Part 4: Switched socket-outlets and
connectors with or without interlock (IEC
23H/393A/CD:2017); Text in German and English
44
296 DIN EN 60893-2#VDE 0318-
2:2018
Industrial rigid laminated sheets based on
thermosetting resins for electrical purposes - Part 2:
Methods of test (IEC 15/817/CD:2017); Text in
German and English
65
297 DIN EN 60947-7-4#VDE
0611-7-4:2018
Low-voltage switchgear and controlgear - Part 7-4:
Ancillary equipment - PCB terminal blocks for
copper conductors (IEC 121A/176/CDV:2017);
German and English version prEN 60947-7-4:2017
70
298 JIS C 4604/ERRATUM 1 ERRATUM 1
299 JIS C 4620:2018 Cubicle type high voltage power receiving units 66
300 JIS C 5381-22:2018
Low-voltage surge protective devices - Part 22: Surge
protective devices connected to telecommunications
and signalling networks - Selection and application
principles
58
301 JIS C 8285:2018:2018 Plugs, socket-outlets and couplers for industrial
purposes 82
302 JIS C 8435:2018:2018 Boxes and covers of plastic conduits 26
303 JIS C 8715-1:2018
Secondary lithium cells and batteries for use in
industrial applications - Part 1: Tests and
requirements of performance
30
Điện tử Trở về đầu trang
304 IEC 60191-4:2013
+AMD1:2018 CSV Mechanical standardization of semiconductor
devices - Part 4: Coding system and classification 152
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 21/38
into forms of package outlines for semiconductor
device packages
305 IEC 60191-4:2013/
AMD1:2018
Amendment 1 - Mechanical standardization of
semiconductor devices - Part 4: Coding system and
classification into forms of package outlines for
semiconductor device packages
29
306 ASTM F83-71:2018 Replaces:
ASTM F83-71(2013)
Standard Practice for Definition and Determination
of Thermionic Constants of Electron Emitters 6
307 ASTM F85-76:2018 Replaces:
ASTM F85-76(2013)
Standard Practice for Nomenclature for Wire Leads
Used as Conductors in Electron Tubes 3
308 ASTM F996 -11:2018
Replaces: ASTM F996-11
Standard Test Method for Separating an Ionizing
Radiation-Induced MOSFET Threshold Voltage
Shift Into Components Due to Oxide Trapped Holes
and Interface States Using the Subthreshold
Current#x2013;Voltage Characteristics
7
309 ASTM F1190-18:2018
Replaces: ASTM F1190-11
Standard Guide for Neutron Irradiation of Unbiased
Electronic Components 6
310 prEN 50689 Safety of laser products - Particular Requirements for
Consumer Laser Products 10
311 DIN EN 60286-1:2018
Packaging of components for automatic handling -
Part 1: Tape packaging of components with axial
leads on continuous tapes (IEC 60286-1:2017);
German version EN 60286-1:2017
14
312 DIN EN 60679-1:2018
Piezoelectric, dielectric and electrostatic oscillators
of assessed quality - Part 1: Generic specification
(IEC 60679-1:2017); German version EN 60679-
1:2017
39
313 DIN EN 60747-16-3:2018
Semiconductor devices - Part 16-3: Microwave
integrated circuits - Frequency converters (IEC
60747-16-3:2002 + A1:2009 + A2:2017); German
version EN 60747-16-3:2002 + A1:2009 + A2:2017
48
314 DIN EN 60747-16-4:2018
Semiconductor devices - Part 16-4: Microwave
integrated circuits - Switches (IEC 60747-16-4:2004
+ A1:2009 + A2:2017); German version EN 60747-
16-4:2004 + A1:2011 + A2:2017
31
315 JIS C 5101-8:2018
Fixed capacitors for use in electronic equipment -
Part 8: Sectional specification: Fixed capacitors of
ceramic dielectric, Class 1
40
316 JIS C 5101-9:2018
Fixed capacitors for use in electronic equipment -
Part 9: Sectional specification: Fixed capacitors of
ceramic dielectric, Class 2
28
317 JIS C 5101-20:2018
Fixed capacitors for use in electronic equipment -
Part 20: Sectional specification - Fixed metallized
polyphenylene sulfide film dielectric surface mount
d.c. capacitors
26
318 JIS C 5101-23:2018 Fixed capacitors for use in electronic equipment -
Part 23: Sectional specification - Fixed metallized
polyethylene naphthalate film dielectric surface
24
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 22/38
mount d.c. capacitors
319 JIS C 5101-24:2018
Fixed capacitors for use in electronic equipment -
Part 24: Sectional specification - Fixed tantalum
electrolytic surface mount capacitors with conductive
polymer solid electrolyte
26
320 JIS C 5101-25:2018
Fixed capacitors for use in electronic equipment -
Part 25: Sectional specification - Fixed aluminium
electrolytic surface mount capacitors with conductive
polymer solid electrolyte
28
321 JIS C 5160-1:2018
Fixed electric double-layer capacitors for use in
electric and electronic equipment - Part 1: Generic
specification
56
322 JIS C 5402-17-3:2018
Connectors for electronic equipment - Tests and
measurements - Part 17-3: Cable clamping tests -
Test 17c: Cable clamp resistance to cable pull
(tensile)
6
323 JIS C 60063:2018 Preferred number series for resistors and capacitors 12
Viễn thông. Kỹ thuật âm thanh và hình ảnh Trở về đầu trang
324 IEC 61937:2018 SER
Digital audio - Interface for non-linear PCM
encoded audio bitstreams applying IEC 60958 -
ALL PARTS
452
325 IEC 61970-CGMES:2018
Energy management system application program
interface (EMS-API) - Common Grid Model
Exchange Specification (CGMES)
3450
326 IEC TR 62361-103:2018
Power systems management and associated
information exchange - Interoperability in the long
term - Part 103: Standard profiling
26
327 DIN EN 50288-12-1#VDE
0819-12-1:2018
Multi-element metallic cables used in analogue and
digital communications and control - Part 12-1:
Sectional specification for screened cables
characterised from 1 MHz up to 2 000 MHz -
Horizontal and building backbone cables; German
version EN 50288-12-1:2017
21
328 DIN EN 50679#VDE 0700-
679:2018
Household and similar electrical appliances with a
radio communication interface and/or a radio
determination interface - Safety; German and
English version prEN 50679:2017
20
329 DIN EN 55035#VDE 0878-
35:2018
Electromagnetic compatibility of multimedia
equipment - Immunity requirements (CISPR
35:2016, modified); German version EN
55035:2017
102
330 DIN EN 60154-4:2018
Flanges for waveguides - Part 4: Relevant
specifications for flanges for circular waveguides
(IEC 60154-4:2017); German version EN 60154-
4:2017
20
331 DIN EN 60268-21:2018 Sound system equipment - Part 21: Acoustical
(output based) measurements (IEC
100/2957A/CDV:2017); German and English
149
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 23/38
version prEN 60268-21:2017
332 DIN EN 61000-4-31#VDE
0847-4-31:2018
Electromagnetic compatibility (EMC) - Part 4-31:
Testing and measurement techniques - AC mains
ports broadband conducted disturbance immunity
test (IEC 61000-4-31:2016); German version EN
61000-4-31:2017
50
333 JIS C 5962:2018 Generic specification of fiber optic connector 34
334 JIS C 5965-3-31:2018
Fiber optic interconnecting devices and passive
components - Connector optical interfaces - Part 3-
31: Connector parameters of single mode physically
contacting fibers - One-row 8 degree angled
rectangular polyphenylene sulphide ferrules
26
335 JIS C 6122-4-3:2018
Optical amplifiers - Test methods - Part 4-3: Power
transient parameters - Single channel optical
amplifiers in output power control
22
336 JIS C 6820:2018 General rules of optical fibers 24
337 JIS C 62368-1:2018 Audio/video, information and communication
technology equipment - Part 1: Safety requirements 282
338 EIA/TIA-102.BACD-B-2
Project 25 Inter-RF Subsystem Interface (ISSI)-
Messages and Procedures for Supplementary Data-
Addendum 2- Individual Regrouping
24
339 EIA/TIA-598-D-2 Optical Fiber Cable Color Coding- Addendum 2,
Jacket Color for OM5 Indoor Fiber Cables 14
Công nghệ thông tin Trở về đầu trang
340 ISO/IEC/IEEE 8802-15-
4:2018
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements -
Part 15-4: Wireless medium access control (MAC)
and physical layer (PHY) specifications for low-rate
wireless personal area networks (WPANs)
674
341 ISO/IEC 13818-1:2018
Information technology - Generic coding of moving
pictures and associated audio information - Part 1:
Systems
274
342 ISO/IEC 19794-13:2018 Information technology - Biometric data interchange
formats - Part 13: Voice data 26
343 ISO/IEC 23008-2 AMD
2:2018
Information technology - High efficiency coding and
media delivery in heterogeneous environments - Part
2: High efficiency video coding - Amendment 2:
Main 10 still picture profile
10
344 ISO/IEC FDIS 27034-3:2018 Information technology - Application security - Part
3: Application security management process 47
345 IEC 61937-13:2018
Digital audio - Interface for non-linear PCM encoded
audio bitstreams applying IEC 60958 - Part 13:
MPEG-H 3D Audio
17
346 IEC 62680-1-4:2018
Universal Serial Bus interfaces for data and power -
Part 1-4: Common components - USB Type-C?
Authentication Specification
65
347 ISO/IEC 10373-6:2016/ Amendment 3 - Identification cards - Test methods - 2
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 24/38
AMD3:2018 Part 6: Proximity cards
348 ISO/IEC 23008-2:2017/
AMD1:2018
Amendment 1 - Information technology - High
efficiency coding and media delivery in
heterogeneous environments - Part 2: High
efficiency video coding - Additional colour
representation code point
12
349 ISO/IEC 30134-1:2016/
AMD1:2018
Amendment 1 - Information technology - Data
centres - Key performance indicators - Part 1:
Overview and general requirements
1
350 ISO/IEC 30134-3:2016/
AMD1:2018
Amendment 1 - Information technology - Data
centres - Key performance indicators - Part 3:
Renewable energy factor (REF)
4
351 ISO/IEC 14543-5-11:2018
Information technology - Home electronic system
(HES) architecture - Part 5-11: Intelligent grouping
and resource sharing for HES Class 2 and Class 3 -
Remote user interface
37
352 ISO/IEC 18477-5:2018
Information technology - Scalable compression and
coding of continuous-tone still images - Part 5:
Reference software
17
353 ISO/IEC 19784-1:2018 Information technology - Biometric application
programming interface - Part 1: BioAPI specification 234
354 ISO/IEC 14443-1:2018
Cards and security devices for personal identification
- Contactless proximity objects - Part 1: Physical
characteristics
11
355 ISO/IEC 19823-13:2018
Information technology - Conformance test methods
for security service crypto suites - Part 13:
Cryptographic Suite Grain-128A
21
356 ISO/IEC 23001-11:2015/
AMD2:2018
Amendment 2 - Information technology - MPEG
systems technologies - Part 11: Energy-efficient
media consumption (green metadata) - Conformance
and reference software
4
357 ISO/IEC 23091-3:2018 Information technology - Coding-independent code
points - Part 3: Audio 22
358 ISO/IEC 29110-4-1:2018
Systems and software engineering - Lifecycle
profiles for Very Small Entities (VSEs) - Part 4-1:
Software engineering - Profile specifications:
Generic profile group
18
359 ISO/IEC 30115:2018 Information technology - Redfish scalable platforms
management API specification 90
360 ISO/IEC 14776-454:2018
Information technology - Small Computer System
Interface (SCSI) - Part 454: SCSI Primary
Commands - 4 (SPC-4)
911
361
ASTM E1692-95a:2018
Replaces: ASTM E1694-
95a(2012)
Standard Classification for Serviceability of an
Office Facility for Change and Churn by Occupants 8
362
ASTM E1693-95:2018
Replaces: ASTM E1665-
95a(2012)
Standard Classification for Serviceability of an
Office Facility for Protection of Occupant Assets 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 25/38
363
ASTM E1694-95a:2018
Replaces: ASTM E1694-
95a(2012)
Standard Classification for Serviceability of an
Office Facility for Special Facilities and
Technologies
8
364
ASTM E1701-95:2018
Replaces: ASTM E1701-
95(2012)
Standard Classification for Serviceability of an
Office Facility for Manageability 15
365 EN 9223-100:2018
Programme Management - Configuration
Management - Part 100: A guide for the application
of the principles of configuration management
32
366 EN 9223-101:2018 Programme Management - Configuration
Management - Part 101: Configuration identification 23
367 EN 9223-102:2018
Programme Management - Configuration
Management - Part 102: Configuration status
accounting
21
368 EN 9223-103:2018
Programme Management - Configuration
Management - Part 103: Configuration Verifications,
Reviews and Audits
25
369 EN 9223-104:2018 Programme Management - Configuration
Management - Part 104: Configuration Control 33
370 EN 9223-105:2018 Programme Management - Configuration
Management - Part 105: Glossary 14
371 FprCEN/TR 17249-1 Intelligent transport systems - eSafety - Part 1:
Extending eCall to other categories of vehicle 93
372 DIN 2137-1:2018 Keyboards for data and text input - Part 1: German
keyboard layout; Text in German and English 43
373 DIN 2137-2:2018 Keyboards for data and text input - Part 2: Additional
requirements; Text in German and English 10
374 JIS X 0164-2:2018 Information technology - Software asset
management - Part 2: Software identification tag 100
375 JIS X 0510:2018
Information technology - Automatic identification
and data capture techniques - QR Code bar code
symbology specification
116
376 JIS X 0532-1:2018
Information technology - Automatic identification
and data capture techniques - Unique identification -
Part 1: Individual transport units
12
377 JIS X 0532-2:2018
Information technology - Automatic identification
and data capture techniques - Unique identification -
Part 2: Registration procedures
8
378 JIS X 0532-3:2018
Information technology - Automatic identification
and data capture techniques - Unique identification -
Part 3: Common rules
16
379 JIS X 0532-4:2018
Information technology - Automatic identification
and data capture techniques - Unique identification -
Part 4: Individual products and product packages
14
380 JIS X 0532-5:2018
Information technology - Automatic identification
and data capture techniques-Unique identification -
Part 5: Individual returnable transport items (RTIs)
12
381 JIS X 0532-6:2018 Information technology - Automatic identification 14
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 26/38
and data capture techniques - Unique identification -
Part 6: Groupings
382 JIS X 5230:2018
Information technology - Telecommunications and
information exchange between systems - Close
Capacitive Coupling Communication Physical Layer
(CCCC PHY)
48
383 JIS Z 6019:2018 Long-term preservation for digital information by
magnetic tape 20
Công nghệ ảnh Trở về đầu trang
384 DIN 18947:2018 Earth plasters - Requirements and test methods 20
385 DIN 18948:2018 Earthen Boards - Requirements and test methods 30
Phương tiện giao thông đường bộ Trở về đầu trang
386 ISO 15118-8:2018
Road vehicles - Vehicle to grid communication
interface - Part 8: Physical layer and data link layer
requirements for wireless communication
34
387 IEC 60335-2-114:2018
Household and similar electrical appliances - Safety -
Part 2-114: Particular requirements for self-balancing
personal transport devices for use with batteries
containing alkaline or other non-acid electrolytes
36
388 IEC 61851-21-2:2018
Electric vehicle conductive charging system - Part 21-
2: Electric vehicle requirements for conductive
connection to an AC/DC supply - EMC requirements
for off board electric vehicle charging systems
47
389 FprEN 17124
Hydrogen fuel - Product specification and quality
assurance - Proton exchange membrane (PEM) fuel
cell applications for road vehicles
30
390 DIN 70001:2018
Road vehicles - Thermoinsulated dump bodies -
Procedure for calcualtion of thermoinsulated dump
bodies
33
391 DIN EN 1646-1:2018
Leisure accommodation vehicles - Motor caravans -
Part 1: Habitation requirements relating to health and
safety; German version EN 1646-1:2018
44
392 DIN EN 1648-1:2018
Leisure accommodation vehicles - 12 V direct current
extra low voltage electrical installations - Part 1:
Caravans; German version EN 1648-1:2018
20
393 DIN EN 1648-2:2018
Leisure accommodation vehicles - 12 V direct current
extra low voltage electrical installations - Part 2:
Motor caravans; German version EN 1648-2:2018
20
394 DIN EN 1949:2018
Specification for the installation of LPG systems for
habitation purposes in leisure accommodation
vehicles and accommodation purposes in other
vehicles; German and English version prEN
1949:2018
94
395 JIS G 3472:2018 Electric resistance welded carbon steel tubes for
automobile 16
Đường sắt Trở về đầu trang
396 DIN EN 1907:2018 Safety requirements for cableway installations
designed to carry persons - Terminology; Trilingual 87
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 27/38
version EN 1907:2017
397 DIN EN 50343/A1#VDE
0115-130/A1:2018
Railway applications - Rolling stock - Rules for
installation of cabling; German version EN
50343:2014/A1:2017
5
Đóng tàu và kết cấu tàu thủy Trở về đầu trang
398 ISO 20233-1:2018
Ships and marine technology - Model test method for
propeller cavitation noise evaluation in ship design -
Part 1: Source level estimation
13
399
ASTM F1020-86:2018
Replaces: ASTM F1020-
86(2011)
Standard Specification for Line-Blind Valves for
Marine Applications 3
400
ASTM F1271-90:2018
Replaces: ASTM F1271-
90(2012)
Standard Specification for Spill Valves for Use in
Marine Tank Liquid Overpressure Protections
Applications
4
401
ASTM F1298-90:2018
Replaces: ASTM F1298-
90(2012)
Standard Specification for Flexible, Expansion-Type
Ball Joints for Marine Applications 3
402
ASTM F1548-01:2018
Replaces: ASTM F1548-
01(2012)
Standard Specification for Performance of Fittings
for Use with Gasketed Mechanical Couplings Used in
Piping Applications
4
403 DIN 83423:2018 Strainer covers for bilge wells 12
Kỹ thuật máy bay và tàu vũ trụ Trở về đầu trang
404 ISO/FDIS 10794 Space systems - Programme management - Material,
mechanical parts and processes 45
405 IEC TS 62647-4:2018
Process management for avionics - Aerospace and
defence electronic systems containing lead-free
solder - Part 4: Ball grid array (BGA) re-balling
41
406 ASTM F2483 -18e1:2018
Replaces: ASTM F2483-18
Standard Practice for Maintenance and the
Development of Maintenance Manuals for Light
Sport Aircraft
9
407 ASTM F3310-18:2018 Standard Specification for Non-Essential Ice
Detectors for Aircraft 4
408 FprEN 2031 Aerospace series - Steel 102Cr6 (1.2067) - Hardened
and tempered - Bars 8
409 FprEN 2450 Aerospace series - Steel 31Ni10 - 1230 MPa <= Rm
<= 1420 MPa - Bars - De <= 40mm 8
410 FprEN 2475
Aerospace series - Steel 30CrNiMo8 (1.6580) - Air
melted - Hardened and tempered - Bar for machining
- De <= 100 mm - 1100 MPa <= Rm <= 1300 MPa
8
411 EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) -
Low compressions set - Hardness 50 IRHD 6
412 FprEN 4165-026
Aerospace series - Connector, electrical, rectangular,
modular - Operating temperature 175 °C continuous -
Part 026: Accessories for single module connector -
Product standard
17
413 FprEN 4708-106 Aerospace series - Sleeving, heat-shrinkable, for
binding, insulation and identification - Part 106:
Limited fire hazard sleeving - Operating temperature
13
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 28/38
-30 °C to 150 °C - Product standard
414 DIN EN 2591-318:2018
Aerospace series - Elements of electrical and optical
connection - Test methods - Part 318: Fire-resistance;
German and English version FprEN 2591-318:2018
29
415 DIN EN 2591-326:2018
Aerospace series - Elements of electrical and optical
connection - Test methods - Part 326: Fire immersion
test; German and English version FprEN 2591-
326:2018
34
416 DIN EN 4510:2018
Aerospace series - Pipe couplings, 60°, spherical, in
titanium alloy TI-P64001, adapters, straight, double
end, with locking ring; German and English version
FprEN 4510:2018
25
417 DIN EN 4533-002:2018
Aerospace series - Fibre optic systems - Handbook -
Part 002: Test and measurement; German and
English version EN 4533-002:2017
104
418 DIN EN 4533-003:2018
Aerospace series - Fibre optic systems - Handbook -
Part 003: Looming and installation practices; German
and English version EN 4533-003:2017
39
419 DIN EN 4533-004:2018
Aerospace series - Fibre optic systems - Handbook -
Part 004: Repair, maintenance, cleaning and
inspection; German and English version EN 4533-
004:2018
74
420 DIN EN 4691-1:2018
Aerospace series - Tie rod with integrated bolts - Part
1: Technical specification; German and English
version EN 4691-1:2017
113
421 DIN EN 4691-2:2018
Aerospace series - Tie rod with integrated bolts - Part
2: Overview construction kit; German and English
version EN 4691-2:2018
26
422 DIN EN 4692:2018
Aerospace series - Tie Rod with integrated bolts -
Locking clip; German and English version EN
4692:2017
27
423 DIN EN 4693:2018
Aerospace series - Tie rod with integrated bolts -
Assembly code A, B and C; German and English
version EN 4693:2017
45
424 DIN EN 4694:2018
Aerospace series - Tie rod with integrated bolts -
Assembly code D, E and F; German and English
version EN 4694:2017
45
425 DIN EN 4695:2018
Aerospace series - Tie Rod with integrated bolts -
Assembly Code G, H and K; German and English
version EN 4695:2017
41
426 DIN EN 4726:2018
Aerospace series - Acceptance parameters of
aesthetical variations for all visible equipment
installed in aircraft cabins under all contractual
variations; German and English version FprEN
4726:2018
138
427 DIN EN 4840-101:2018 Aerospace series - Heat shrinkable moulded shapes -
Part 101: Polyolefin, semi-rigid, limited fire hazard -
Temperature range -30 °C to 105 °C - Product
25
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 29/38
standard; German and English version FprEN 4840-
101:2018
428 DIN EN 9278:2018
Aerospace series - General Principles of
Obsolescence Management of chemicals, materials
and processes; German and English version FprEN
9278:2018
61
Thiết bị xếp dỡ vật liệu Trở về đầu trang
429 ISO/FDIS 7590:2018 Steel cord conveyor belts - Methods for the
determination of total thickness and cover thickness 7
430 FprEN ISO 7590
Steel cord conveyor belts - Methods for the
determination of total thickness and cover thickness
(ISO/FDIS 7590:2018)
1
431 JIS B 7606-1:2018 Belt weighers - Part 1: Metrological and technical
requirements 60
432 JIS B 7606-2:2018 Belt weighers - Part 2: Tests procedures 40
433 JIS K 6322:2018 Conveyor belts - Specification for rubber covered
conveyor belts of textile construction 24
434 JIS Z 0620:2018 Industrial racks 30
Bao gói và phân phối hàng hóa Trở về đầu trang
435 ASTM D6198-18:2018
Replaces: ASTM D6198-12 Standard Guide for Transport Packaging Design 5
436
ASTM D6199-18:2018
Replaces: ASTM D6199-
07(2012)
Standard Practice for Quality of Wood Members of
Containers and Pallets 7
437
ASTM F2825-18:2018
Replaces: ASTM F2825-
10(2015)
Standard Practice for Climatic Stressing of Packaging
Systems for Single Parcel Delivery 3
438 DIN 6111:2018 Packaging - High-pressure packages - Reusable, with
non-removeable dispensing facility 9
439 DIN EN 50597#VDE 0705-
597:2018
Energy consumption of vending machines; German
and English version prEN 50597:2017 52
440 JIS S 0021-2:2018 Packaging - Accessible design - Ease of opening 46
Công nghệ dệt may và da Trở về đầu trang
441 FprEN ISO 5398-1
Leather - Chemical determination of chromic oxide
content - Part 1: Quantification by titration (ISO/FDIS
5398-1:2018)
1
442 FprEN ISO 5398-3
Leather - Chemical determination of chromic oxide
content - Part 3: Quantification by atomic absorption
spectrometry (ISO/FDIS 5398-3:2018)
1
443 prEN ISO 26082-1:2018
Leather - Physical and mechanical test methods for
the determination of soiling - Part 1: Rubbing
(Martindale) method (ISO/DIS 26082-1:2018)
1
444 DIN 54034:2018
Testing of colour fastness of textiles - Determination
of colour fastness of dyeings and prints to bleaching:
Hypochlorite (mild)
10
May mặc Trở về đầu trang
445 ISO/FDIS 17708:2018 Footwear - Test methods for whole shoe - Upper sole 11
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 30/38
adhesion
446 ISO 18454:2018 Footwear - Standard atmospheres for conditioning
and testing of footwear and components for footwear 3
447 FprEN ISO 17708 Footwear - Test methods for whole shoe - Upper sole
adhesion (ISO/FDIS 17708:2018) 1
Nông nghiệp Trở về đầu trang
448 FprEN 13525 Forestry machinery - Wood chippers - Safety 72
449 DIN EN 17246:2018
Fertilizers - Determination of perchlorate in mineral
fertilizers by ion chromatography and conductivity
detection (IC-CD); German and English version prEN
17246:2018
22
Công nghệ thực phẩm Trở về đầu trang
450 EN ISO 11747:2012/A1:2018
Rice - Determination of rice kernel resistance to
extrusion after cooking - Amendment 1 (ISO
11747:2012/Amd 1:2017)
3
451 FprEN ISO 22000
Food safety management systems - Requirements for
any organization in the food chain (ISO/FDIS
22000:2018)
1
452 DIN 10969:2018 Sensory analysis - Descriptive analysis with
following quality evaluation 15
453 JIS B 9652:2018 Requirements for safety and hygiene of cake making
machinery 80
Công nghệ hóa chất Trở về đầu trang
454 ISO/FDIS 12985-1:2018
Carbonaceous materials used in the production of
aluminium - Baked anodes and cathode blocks - Part
1: Determination of apparent density using a
dimensions method
4
455 ISO/FDIS 12985-2:2018
Carbonaceous materials used in the production of
aluminium - Baked anodes and cathode blocks - Part
2: Determination of apparent density and of open
porosity using a hydrostatic method
5
456 DIN 51897:2018 Gas analysis - Terms and definitions 24
457 DIN EN 13150:2018
Workbenches for laboratories - Dimensions, safety
requirements and test methods; German and English
version prEN 13150:2018
29
458 DIN EN 17242:2018 Recirculatory Filtration Fume Cupboards; German
and English version prEN 17242:2018 45
459 DIN EN 61010-2-051#VDE
0411-2-051:2018
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-051:
Particular requirements for laboratory equipment for
mixing and stirring (IEC 66/642/CDV:2017); German
and English version prEN 61010-2-051:2017
20
460 DIN EN 61010-2-101#VDE
0411-2-101:2018
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-
101: Safety requirements for in vitro diagnostic (IVD)
medical equipment (IEC 66/644/CDV:2017); German
and English version prEN 61010-2-101:2017
34
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 31/38
461 JIS K 0138:2018 General rules for quantitative nuclear magnetic
resonance spectroscopy 54
462 JIS K 0144:2018
Surface chemical analysis - Glow discharge optical
emission spectrometry (GD-OES) - Introduction to
use
14
463 JIS K 8059:2018 Sodium hydrogensulfite (Reagent) 16
464 JIS K 8060:2018 Sodium sulfite heptahydrate (Reagent) 16
465 JIS K 8099:2018 Diethylene glycol (Reagent) 14
466 JIS K 8123:2018 Calcium chloride (Reagent) 20
467 JIS K 8124:2018 Calcium chloride (for drying) (Reagent) 8
468 JIS K 8137:2018 Iron (II) chloride tetrahydrate (Reagent) 22
469 JIS K 8142:2018 Iron (III) chloride hexahydrate (Reagent) 24
470 JIS K 8145:2018 Copper (II) chloride dihydrate (Reagent) 18
471 JIS K 8152:2018 Nickel (II) chloride hexahydrate (Reagent) 14
472 JIS K 8356:2018 Zinc acetate dihydrate (Reagent) 22
473 JIS K 8403:2018 Iodine trichloride (Reagent) 8
474 JIS K 8405:2018 Zinc oxide (Reagent) 18
475 JIS K 8407:2018 Antimony (III) oxide (Reagent) 14
476 JIS K 8447:2018 Sodium cyanide (Reagent) 14
477 JIS K 8559:2018 Iron (III) nitrate nonahydrate (Reagent) 18
478 JIS K 8563:2018 Lead (II) nitrate (Reagent) 14
479 JIS K 8567:2018 Magnesium nitrate hexahydrate (Reagent) 22
480 JIS K 8575:2018 Calcium hydroxide (Reagent) 18
481 JIS K 8587:2018 Amidosulfuric acid (Reagent) 14
482 JIS K 8598:2018 Selenium (Reagent) 12
483 JIS K 8612:2018 Sodium tungstate (VI) dihydrate (Reagent) 20
484 JIS K 8653:2018 Devarda's alloy (Reagent) 10
485 JIS K 8660:2018 Copper (Reagent) 18
486 JIS K 8736:2018 Eriochrome black T (Reagent) 10
487 JIS K 8741:2018 Sulfuric acid, fuming (Reagent) 14
488 JIS K 8810:2018 1-Butanol (Reagent) 18
489 JIS K 8876:2018 Magnesium powder (Reagent) 10
490 JIS K 8885:2018 Silicon dioxide (Reagent) 14
491 JIS K 8984:2018 Copper (II) sulfate (Reagent) 14
492 JIS K 9547:2018 Phenylfluorone (Reagent) 8
Khai thác mỏ và khoáng sản Trở về đầu trang
493 JIS M 8242:2018 Manganese ores - Method for determination of copper
content 16
494 JIS M 8261:2018 Chromium ores - General rules for chemical analysis 20
Dầu mỏ và các công nghệ liên quan Trở về đầu trang
495 ASTM D1266-18:2018
Replaces: ASTM D1266-13
Standard Test Method for Sulfur in Petroleum
Products (Lamp Method) 12
496 ASTM D3231-18:2018
Replaces: ASTM D3231-13 Standard Test Method for Phosphorus in Gasoline 5
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 32/38
497 ASTM D3606 -17:2018
Replaces: ASTM D3606-10e1
Standard Test Method for Determination of Benzene
and Toluene in Spark Ignition Fuels by Gas
Chromatography
23
498
ASTM D5762-18:2018
Replaces: ASTM D5762-
12(2017)
Standard Test Method for Nitrogen in Liquid
Hydrocarbons, Petroleum and Petroleum Products by
Boat-Inlet Chemiluminescence
6
499 DIN EN 116:2018
Diesel and domestic heating fuels - Determination of
cold filter plugging point - Stepwise cooling bath
method; German version EN 116:2015
24
500 API RP 13B-2 + ERTA 1 +
ERTA 2
Recommended Practice for Field Testing Oil-based
Drilling Fluids 156
501 API RP 13B-2 ERTA 2 Recommended Practice for Field Testing Oil-based
Drilling Fluids; Errata 2 1
Luyện kim Trở về đầu trang
502 ISO/FDIS 16151:2018
Corrosion of metals and alloys - Accelerated cyclic
test with exposure to acidified salt spray, dry and wet
conditions
19
503 EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test
method (ISO 4545-1:2017) 3
504 EN ISO 4545-2:2018
Metallic materials - Knoop hardness test - Part 2:
Verification and calibration of testing machines (ISO
4545-2:2017)
3
505 EN ISO 4545-3:2018 Metallic materials - Knoop hardness test - Part 3:
Calibration of reference blocks (ISO 4545-3:2017) 3
506 EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1:
Test method (ISO 6507-1:2018) 3
507 EN ISO 6507-2:2018
Metallic materials - Vickers hardness test - Part 2:
Verification and calibration of testing machines (ISO
6507-2:2018)
3
508 EN ISO 6507-3:2018 Metallic materials - Vickers hardness test - Part 3:
Calibration of reference blocks (ISO 6507-3:2018) 3
509 EN ISO 11130:2018 Corrosion of metals and alloys - Alternate immersion
test in salt solution (ISO 11130:2017) 3
510 FprEN ISO 16151
Corrosion of metals and alloys - Accelerated cyclic
test with exposure to acidified salt spray, dry and wet
conditions (ISO/FDIS 16151:2018)
1
511 EN ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates
- Part 1: Elastic-bar-type systems (ISO 26203-1:2018) 3
512 DIN 1239:2018 Coverings for wells, spring water chambers and other
water supply construction - Principles for construction 20
513 JIS B 7721:2018 Tension/compression testing machines - Calibration
and verification of the force-measuring system 20
514 JIS B 7914-2:2018 Marks for survey and boundary - Part 2: Metal
markers 10
515 JIS B 7914-3:2018 Marks for survey and boundary - Part 3: Nail Markers 12
516 JIS G 3429:2018 Seamless steel tubes for high pressure gas cylinders 8
517 JIS G 3473:2018 Carbon steel tubes for cylinder barrels 12
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 33/38
518 JIS G 3521:2018 Hard drawn steel wires 16
519 JIS Z 2243-1:2018 Brinell hardness test - Part 1: Test method 20
520 JIS Z 2243-2:2018 Brinell hardness test - Part 2: Table of hardness values 14
Công nghệ chế biến gỗ Trở về đầu trang
521 ISO 19474:2018:2018 Round timber - Visual characteristics - Methods of
determination 12
522 DIN EN 622-4:2018
Fibreboards - Specifications - Part 4: Requirements
for softboards; German and English version prEN
622-4:2018
24
Thủy tinh và gốm Trở về đầu trang
523 JIS R 9101:2018 Methods for chemical analysis of gypsum 44
Cao su và chất dẻo Trở về đầu trang
524 FprEN 549 Rubber materials for seals and diaphragms for gas
appliances and gas equipment 31
525 FprEN 17129
Continuous-fibre-reinforced plastic composites -
Pultruded unidirectional rods - Determination of
tensile properties in parallel to the fibre direction
22
526 FprEN ISO 2555
Plastics - Resins in the liquid state or as emulsions or
dispersions - Determination of apparent viscosity
using a single cylinder type rotational viscometer
method (ISO/FDIS 2555:2018)
1
527 EN ISO 10364:2018
Structural adhesives - Determination of the pot life
(working life) of multi-component adhesives (ISO
10364:2015)
3
528 DIN EN 477:2018
Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the resistance to impact of profiles
by falling mass; German version EN 477:2018
9
529 DIN EN 478:2018
Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the appearance after exposure at 150
°C; German version EN 478:2018
7
530 DIN EN 479:2018
Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of heat reversion; German version EN
479:2018
8
531 DIN EN 514:2018
Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the strength of welded corners and
T-joints; German version EN 514:2018
16
532 DIN EN 17224:2018
Determination of compressive shear strength of wood
adhesives at elevated temperatures; German and
English version prEN 17224:2018
25
533 JIS K 6220-2:2018 Rubber compounding ingredients - Organic chemicals
- Test methods - Part 2: Sulfenamide accelerators 18
534 JIS K 6220-3:2018
Rubber compounding ingredients - Organic chemicals
- Test methods - Part 3: p-Phenylenediamine
antidegradants (PPDs)
20
535 JIS K 6230:2018 Rubber - Identification - Infrared spectrometric
methods 84
536 JIS K 6265:2018 Rubber, vulcanized and thermoplastic - Determination 36
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 34/38
of temperature rise and resistance to fatigue in
flexometer testing
537 JIS K 6273:2018 Rubber, vulcanized or thermoplastic - Determination
of tension set, elongation and creep 18
538 JIS K 6274:2018
Rubber and plastics - Analysis of multi-peak traces
obtained in determinations of tear strength and
adhesion strength
12
539 JIS K 6300-4:2018 Rubber, unvulcanized - Physical property - Part 4:
Determination of blow point 14
540 JIS K 6410-3:2018
Elastomeric seismic-protection isolators for buildings
- Part 3: High-durability and high-performance
specifications, and test methods
30
541 JIS K 6920-1:2018
Plastics - Polyamide (PA) moulding and extrusion
materials - Part 1: Designation system and basis for
specifications
20
542 JIS K 7351:2018 Sensitive measurement method of peroxide in plastics
by detecting ultra-weak photon emission 28
Giấy Trở về đầu trang
543 JIS P 8148:2018
Paper, board and pulps - Measurement of diffuse blue
reflectance factor - Indoor daylight conditions (ISO
brightness)
14
544 JIS P 8216:2018 Pulps - Standard water for physical testing 8
Sơn và chất màu Trở về đầu trang
545
ASTM E2255/E2255M-
18:2018 Replaces: ASTM
E2255/E2255M-13
Standard Practice for Conducting Visual Assessments
for Lead Hazards in Buildings 20
546 DIN 55655-11:2018 Paints and varnishes - Electro-deposition paints - Part
11: Bath stability 6
547 DIN 55655-12:2018 Paints and varnishes - Electro-deposition paints - Part
12: Sedimentation on horizontal areas 7
Vật liệu xây dựng và xây dựng nhà Trở về đầu trang
548 ASTM F2934-12:2018
Replaces: ASTM F2934-12
Standard Specification for Circular Metallic Bellows
Type Expansion Joint for HVAC Piping Applications 5
549 ASTM E2252 -18:2018
Replaces: ASTM E2252-12
Standard Practice for Selection of Lead Hazard
Reduction Methods for Identified Risks in Residential
Housing or Child Occupied Facilities
9
550 prEN 81-20
Safety rules for the construction and installation of
lifts - Lifts for the transport of persons and goods -
Part 20: Passenger and goods passenger lifts
183
551 prEN 81-22
Safety rules for the construction and installation of
lifts - Lifts for the transport of persons and goods -
Part 22: Passenger and goods passenger lifts with
inclined travel path
225
552 prEN 81-50
Safety rules for the construction and installation of
lifts - Examinations and tests - Part 50: Design rules,
calculations, examinations and tests of lift
components
108
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 35/38
553 prEN 81-72
Safety rules for the construction and installation of
lifts - Particular applications for passenger and goods
passenger lifts - Part 72: Firefighters lifts
51
554 prEN 81-73
Safety rules for the construction and installation of
lifts - Particular applications for passenger and goods
passenger lifts - Part 73: Behaviour of lifts in the
event of fire
17
555 DIN 18012:2018 Service connections for buildings - General planning
criteria 33
556 DIN 18533-1/A1:2018
Waterproofing of elements in contact with soil - Part
1: Requirements and principles for design and
execution; Amendment A1
2
557 DIN 18533-3/A1:2018
Waterproofing of elements in contact with soil - Part
3: Waterproofing with liquid-applied waterproofing
materials; Amendment A1
3
558 DIN 18534-5/A1:2018
Waterproofing for indoor applications - Part 5:
Waterproofing with waterproofing materials in sheet
form in conjunction with tiles; Amendment A1
2
559 DIN 18942-1:2018 Earthen materials - Part 1: Vocabulary 10
560 DIN 18942-100:2018 Earthen materials - Part 100: Conformity assessment 11
561 DIN 18945:2018 Earth blocks - Requirements and test methods 24
562 DIN 18946:2018 Earth masonry mortar - Requirements and test
methods 18
563 DIN 20000-404:2018
Application of building products in structures - Part
404: Rules for the application of autoclaved aerated
concrete masonry units according to DIN EN 771-
4:2015-11
11
564 DIN 67528:2018 Lighting in public car-parks and on public off-street
parking spaces 14
565 DIN EN 81-22:2018
Safety rules for the construction and installation of
lifts - Lifts for the transport of persons and goods -
Part 22: Passenger and goods passenger lifts with
inclined travel path; German and English version
prEN 81-22:2018
449
566 DIN EN 1993-1-
1/NA/A1:2018
National Annex - Nationally determined parameters -
Eurocode 3: Design of steel structures - Part 1-1:
General rules and rules for buildings
4
567 DIN EN 12046-1:2018 Operating forces - Test method - Part 1: Windows;
German and English version prEN 12046-1:2018 27
568 DIN EN 12390-4:2018
Testing hardened concrete - Part 4: Compressive
strength - Specification for testing machines; German
and English version prEN 12390-4:2018
37
569 DIN EN 12390-16:2018
Testing hardened concrete - Part 16: Determination of
the shrinkage of concrete; German and English
version prEN 12390-16:2018
26
570 DIN EN 12390-17:2018
Testing hardened concrete - Part 17: Determination of
creep of concrete in compression; German and
English version prEN 12390-17:2018
29
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 36/38
571 DIN EN 13115:2018
Windows - Classification of mechanical properties -
Racking, torsion and operating forces; German and
English version prEN 13115:2018
16
572 DIN EN 15804/A2:2018
Sustainability of construction works - Environmental
product declarations - Core rules for the product
category of construction products; German and
English version EN 15804:2012+A1:2013/prA2:2018
80
573 JIS A 1136:2018 Method of test for compressive strength of spun
concrete 16
574 JIS A 1159:2018 Method of test for J-Ring flow of concrete 16
575 JIS A 1160:2018
Evaluation criteria for workability of high fluidity
concrete using air-entraining and high-range water-
reducing admixture containing viscosity modifying
agent
14
576 JIS A 5011-1:2018 Slag aggregate for concrete - Part 1: Blast furnace
slag aggregate 60
577 JIS A 5011-4:2018 Slag aggregate for concrete - Part 4: Electric arc
furnace oxidizing slag aggregate 46
578 JIS A 6208:2018 Polymer short fibers for concrete and mortar 42
Xây dựng dân dụng Trở về đầu trang
579 ASTM D2488-17e1:2018
Replaces: ASTM D2488-17
Standard Practice for Description and Identification
of Soils (Visual-Manual Procedures) 13
580
ASTM D4014-03:2018
Replaces: ASTM D4014-
03(2012)
Standard Specification for Plain and Steel-Laminated
Elastomeric Bearings for Bridges 7
581
ASTM D4580/D4580M-
12:2018 Replaces: ASTM
D4580-03(2012)
Standard Practice for Measuring Delaminations in
Concrete Bridge Decks by Sounding 4
582 DIN EN 1794-1:2018
Road traffic noise reducing devices - Non-acoustic
performance - Part 1: Mechanical performance and
stability requirements; German version EN 1794-
1:2018
31
583 DIN EN 16303:2018
Road restraint systems - Validation and verification
process for the use of virtual testing in crash testing
against vehicle restraint system; German and English
version prEN 16303:2018
160
Thiết bị gia dụng và thương mại giải trí. Thể thao Trở về đầu trang
584 ISO 19322:2018 Resilient floor coverings - Specification for floor
coverings based on thermoplastic polymers 16
585 ISO/IEC GUIDE 14:2018 Products and related services - Information for
consumers 14
586 IEC 60335-2-24:2010/
AMD2:2017/ISH1:2018
Interpretation sheet 1 - Amendment 2 - Household
and similar electrical appliances - Safety - Part 2-24:
Particular requirements for refrigerating appliances,
ice-cream appliances and ice makers
2
587 ASTM D7339-18:2018
Replaces: ASTM D7339-12
Standard Test Method for Determination of Volatile
Organic Compounds Emitted from Carpet using a
Specific Sorbent Tube and Thermal Desorption / Gas
10
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 37/38
Chromatography
588 ASTM D8144-18:2018
Standard Test Method for Separation and
Determination of Aromatics, Nonaromatics, and
FAME Fractions in Middle Distillates by Solid-Phase
Extraction and Gas Chromatography
12
589 ASTM E2817-11:2018
Replaces: ASTM E2817-11
Standard Test Method for Test Fueling Masonry
Heaters 22
590 FprEN 16354 Laminate floor coverings - Underlays - Specification,
requirements and test methods 21
591 DIN 18032-3:2018
Sports halls - Halls and rooms for sports and multi-
purpose use - Part 3: Testing of safety against ball
throwing
7
592 DIN 18532-3/A1:2018
Waterproofing of concrete areas trafficable by
vehicles - Part 3: Waterproofing comprising two
layers of polymerized bitumen sheeting; Amendment
A1
2
593 DIN 18532-5/A1:2018
Waterproofing of concrete areas trafficable by
vehicles - Part 5: Waterproofing comprising a layer of
polymerized bitumen sheet in conjunction with a
single synthetic or elastomer sheeting; Amendment
A1
2
594 DIN 18799-1:2018
Fixed ladders for construction works - Safety
requirements and tests - Part 1: Ladders with two
uprights
26
595 DIN 32935:2018
Home sports Equipment - Non-stationary tension and
pression training equipment - Safety requirements and
test methods
15
596 DIN EN 748:2018
Playing field equipment - Football goals - Functional
and safety requirements, test methods; German
version EN 748:2013+A1:2018
19
597 DIN EN 893:2018
Mountaineering equipment - Crampons - Safety
requirements and test methods, German and English
version prEN 893:2018
46
598 DIN EN 16579:2018
Playing field equipment - Portable and permanent
socketed goals - Functional, safety requirements and
test methods; German version EN 16579:2018
44
599 DIN EN 16654:2018
Child protective products - Consumer fitted finger
protection devices for doors - Safety requirements and
test methods; German version EN 16654:2015
19
600 DIN EN 16893:2018
Conservation of Cultural Heritage - Specifications for
location, construction and modification of buildings or
rooms intended for the storage or use of heritage
collections; German version EN 16893:2018
60
601 DIN EN 17232:2018
Water play equipment and features - Safety
requirements, test methods and operational
requirements; German and English version prEN
17232:2018
68
602 DIN EN 50090-3-4:2018 Home and Building Electronic Systems (HBES) - Part 67
Dịch vụ Cung cấp Thông tin Trọn gói Tháng 5/2018 38/38
3-4: Secure Application Layer, Secure Service, Secure
configuration and security Resources; German version
EN 50090-3-4:2017
603 DIN EN 50090-6-1:2018
Home and Building Electronic Systems (HBES) - Part
6-1: Interfaces - Webservice interface; English
version EN 50090-6-1:2017
40
604 DIN EN 60350-1#VDE 0705-
350-1:2018
Household electric cooking appliances - Part 1:
Ranges, ovens, steam ovens and grills - Methods for
measuring Performance (IEC 60350-1:2016,
modified); German version EN 60350-1:2016, with
CD-ROM
77
Để có toàn văn các tiêu chuẩn trên hoặc các tiêu chuẩn khác, vui lòng liên hệ:
Quầy dịch vụ tham khảo – Thư viện Trường ĐH Công nghiệp TP. HCM
12 Nguyễn Văn Bảo, Phường 4, Quận Gò Vấp, TP. HCM
Email: [email protected]
Điện thoại: 0283.8940 390 – 131.