Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
TITUS TECHNOLOGIES & SERVICES SDN BHD (786142-H)
Company Profile
Combining modern equipment, experience and knowledgeable people, give us the
confident and ability to design and manufacture in high precision of specialized
sampling equipment and providing services for upstream and downstream sectors of oil
and gas industry including supply and maintenance for various types of oil and gas
equipment.
We are also providing upstream services by representing various companies as our
principal. Equipped with excellence track records, our principals can provide good
quality services for oil and gas companies.
� VISION
“Our vision is to become a renowned worldwide solutions provider to oil &
industries.”
In Titus, we are committed to deliver precise and reliable products and services to
our clients. We are striving to excellent through underlay guidance as our core
values.
� Precision
� Technology
� Expansion
INTRODUCTION
ABOUT US
� Name of Company : Titus Technologies & Services Sdn Bhd
� Business Address : Lot 3.30B, Tingkat 2, Medan MARA,
Jalan Raja Laut, 50350 Kuala Lumpur.
� Telephone Number : 03 – 2602 0039
� Fax Number : 03 – 2602 3037
� Email: [email protected]
� Date of Incorporation: 27th August 2007
� Company Registration No.: 786142-H
� Website: www.titus.com.my
COMPANY DETAIL
� PRODUCTS
� PVT Sample Cylinders
� PVT Oil Cylinder
� PVT Gas Cylinder
� Micro Gas Cylinder
� Single Phase Cylinder
� Real Time Monitoring for Drilling Operation
� Drilling Monitoring (NDM)
� Drilling Report (NDR)
� SERVICES
� Well Services
� Sand Monitoring
� Light Weight & Compact Well Testing/Metering/Calibration
� MPFM Well Testing/Metering
� Seismic Services
� Marine Seismic Data Acquisition
� Land Seismic Data Acquisition
� Seismic Data Processing/Reprocessing
� G&G Data Interpretation Services
PRODUCTS & SERVICES
SAMPLE CYLINDERS
We manufacture a wide range of samples cylinders for hydrocarbon and water
sampling activities. These cylinders have been tested and proven reliability and
certified accordingly by Det Norske Veritas (DNV).
� PVT Oil Sample Cylinder
� Titan 700
Titus standard 700cc PVT sample cylinder
is used for standard PVT sampling
activities together with Titan 5000 gas
cylinder from the surface separator. The cylinder
can also be used for other pressurized sampling of
hydrocarbon or formation water.
� PVT Gas Sample Cylinder
� Titan 5000
The PVT gas sample cylinder with
5L capacity is designed following the
study done in the lab for a maximum volume of
gas required for PVT analysis. 5L volume of piston type gas
sample cylinder is found to be more than enough for PVT analysis.
With high pressure rating of the cylinder, transfer activities from
conventional gas bottle to recombination cylinder can be eliminated
thus provides more secure and faster physical recombination of fluids in
the laboratory.
� Titan 20L
In addition, normal 20L gas cylinder is
also available according to the
specifications required for PVT and
hydrocarbon sampling requirements.
PRODUCTS
� Micro Gas Sample Cylinder
� Titan 150
Titus micro gas sample cylinder is dedicated for
onsite analysis purposes. High pressure samples
from Single-Phase Reservoir Sampler or wellhead
can be transferred into this cylinder for immediate
onsite analysis on micro-gc or others. High pressure
rating of this cylinder provides assurance of safety in
related to flashing activities from high pressure
wireline or wellhead samples.
Other type of small sample cylinder is also available i.e.
stainless steel and sulfinert type cylinder.
� Single Phase Sample Cylinder
� Titan 700-SPS
The single phase sample cylinder is used for
monophasic sampling, transportation and storage.
Single phase samples which are transferred into this
cylinder are kept in single phase condition through
maintaining the sample pressure above reservoir
pressure. Nitrogen chamber provides pressure
compensation due to heat effect during
transportation or storage.
REAL TIME MONITORING FOR DRILLING OPERATION
� Real Time Monitoring for Drilling Operation
Historically, sound judgments and effective decisions in drilling operation
always require experts to be present on the field to fetch necessary data. But
with the rapid increase in oil demand worldwide, oil companies are faced with
the challenge of expert scarcity.
Navita Drilling Monitoring (NDM) in drilling is the answer to oil companies
that expect up–to-date expert information in real-time mode. NDM Suites will
transmit data from many locations to head office in real-time which enables
experts in head office to monitor, analyze and make sound decisions for many
locations at a time. Therefore, with NDM operational cost is reduced and
personal exposure time at the rig site is minimized.
Benefit :
o Improved communication among asset team members
o Easing you to monitor “plan vs actual”
o As a tool for your effort to reduce Non Productive Time (NPT)
o Optimized experience resources
o Our in-dependency and neutrality allows us to develop strong
relationships with customer
o Integration with Navita Drilling Report (NDR) for customer easiness
Drilling is among the most important and risky activities in the petroleum
industry. It utilizes complex equipment and requires qualified people to be cost
effective and timely, to achieve a successful “goal zero” accident free target.
Real time drilling operation monitoring will help you streamline your drilling
operations and accelerate your success.
� Daily Drilling Report
Management reporting is as crucial as real-time data for analysis. It provides
management with progress and performance of operation on the field for
decision making process. Manual data entry for half-day or daily report by
engineers is costly, prone to human error and leads to time consuming
administration and data management.
Navita Drilling Report (NDR) can retrieve realtime data and utilize the data to
automatically generate management report anytime and anywhere, therefore
avoiding the risk of field reporting and risk of human error. Furthermore with
or archive management system, NDR can also recall previous report easily.
� Well Services
� Sand Monitoring
� Light Weight & Compact Well Testing/Metering/Calibration
� MPFM Well Testing/Metering
� Seismic Services
� Marine Seismic Data Acquisition
� Land Seismic Data Acquisition
� Seismic Data Processing/Reprocessing
� G&G Data Interpretation Services
WELL SERVICES
� Sand Monitoring via Portable Roxar Meter – Non Intrusive & Intrusive Type
Non-Intrusive Type
Titus utilizes sand monitors from Roxar for its sand monitoring services via
non-intrusive sand monitor systems.
The portable Roxar sand monitor is a compact, non-intrusive field mounted
instrument for online determination of sand production in oil, gas or
multiphase flows. The Portable Version offered provides additional flexibility
for well testing and other applications where it is a benefit to move the monitor
to different locations in the field.
Features & Benefits
SERVICES
� Non-intrusive sand monitoring with acoustic technology.
� Onsite decision to manage your system with Maximum Sand
Free Rate or Maximum Allowable Sand Rate.
� Improve production processes to prevent pipelines or separators
filling with sand.
Intrusive Type (In-Line Probes)
An integrated service for detection and quantification of erosion & solids
production
� Technique based on proven electrical resistance (ER) method (no
field calibration required)
� High sensitivity Erosion Probe (not subject to noises; mech., elect., or
flow induced)
� Field instruments - on-line surface monitoring systems
� MultiTrend software gives erosion and sand quantification
� Light Weight & Compact Well Test Package
The objective of Light weight, Modular & Compact packages is to enable
customer to perform well unloading / clean up/metering/calibration operations
without drilling rig intervention, i.e. Rigless which contributes to customer cost
saving initiative.
The design of this well test package is to enable the system to be deployed on
remote platforms with limited crane capacity. However in the event of
customer platform crane operational constraint, the system also can be
deployed by utilising a self erect / self lift mobile crane as a contingency.
Light Weight Package is simple to assemble onsite and it is designed to be
mobile.
The package is capable to perform Rigless operation for;
1. Well Unloading
2. Well Clean Up
3. Production Testing
4. Platform Meter Calibration
5. On Site Sampling & Analysis Services inclusive of representative PVT
Sampling
� MPFM Well Testing Package
MPFM is a non-intrusive multiphase flow measurements device that provides
real-time and continuous three-phase measurements
1. Fraction and velocity of oil � Oil Rate
2. Fraction and velocity of water � Water Rate
3. Fraction and velocity of gas � Gas Rate
SEISMIC SERVICES
� Marine Seismic Data Acquisition
**To be updated.
� Land Seismic Data Acquisition
We are a leading provider of survey design,
planning and seismic data acquisition services all
of seismic data environments, including land,
marine and transition zone. We provide
geophysicists with the proper tools to effectively
design, model, plan and execute even the most
complex seismic surveys.
Pre Operational
To achieve successful execution of the project, we will prepare all project
purposes such as mobilization of required equipment, assemble of expertise
team, set up of base camp and prepare the necessary labor.
Operational
1. Survey Operation
Line Clearing and Bridging
We shall be responsible for having the line cleared to ground level all bush and
undergrowth exception the swamp, high ground shall be built the step and
properly bridge.
Source and Receiver location
All source and receiver locations, including offsets, and revisions in over
lapping zone on block boundary, are to be surveyed.
Azimuth Control
Azimuth control will be taken at the beginning and end of each line. At least
one azimuth check will be taken daily for every line.
GPS QC Checks
We shall conduct all of the following QC checks on GPS system.
Bench Mark GPS contained three dimensional coordinates geodetic and
projection to be used for reference point to all of seismic lines survey.
2. Drilling Operation
We will provide sufficient of shot hole drilling equipment to maintain an
adequate depth for recording. Based on scouting reports, we could anticipate
of the drilling system, using flushing or Power Rig or Compressor system.
3. Energy Source
We will ensure that all procedures for transport, handle and storage of the
explosive comply with the latest version of the safety manual for Geophysical
Operation in Malaysia. Principle shall insure hole depths and location are
exact.
Securing the Explosive Down the Hole
We shall use masking tape to secure the explosive prior loading the explosive
down the hole. This shall prevent the explosive from water intrusion and
partial shot.
4. Recording Operation
Our recording system shall meet the following minimum requirements;
- Performance specifications and QC checks and tests.
- The equipment shall be calibrated and shall meet all manufacturer's
specifications.
- Polarity shall be in according with SEG convention.
- Before Work may begin on assignment, we shall prove seismic data
channels meet the performance specifications. Instrument test shall
be performed in accordance with manufacturer's recommendation
procedures. Monthly Instrument Test and daily test shall be
performed and recorded on the production tape.
- Geophone Testing Prior to Initiation of Project - All geophones shall
meet the manufacture's published performance specification of
natural frequency, dumping, sensitivity and distortion. Principle
shall inspect all string for wiring defect and proper construction and
test for leakage and proper polarity before crew may begin
operations.
5. Quality Assurance, Quality Control and Field Processing
QC was made with the objective to guarantee the quality of the data. We use
standards and manual of procedure for the control of quality of the data and
processing data.
The procedures guarantee the right parameters in records and processing
flow, on record the QC was made according to the client request and IMC
format.
Previous for the data seismic processing sequence, is made the steps test for
the quality control and following the processing sequence which has
established.
6. Final Reports
The Final Report shall split into 3 (three) main reports: Operation Report,
GPS Control Point Report and Surveying Report.
The Report will contain all pertinent operating statistics; all general survey
information, maps and control points, a summary of all equipment used;
and details on all methods of technical and support operations.
� Seismic Data Processing/Reprocessing
Seismic Data Processing
Our data processing center operated by sophisticated software technology to
process seismic data and have the capability of 2D and 3D data processing
thoroughly. Some modules proprietary has been added to the Promax system
to improve functionality. Our data processing land, transition and marine . Our
cutting-edge technical capabilities include the Surface Related Multiple
Elimination (SRME) and Pre-Stack Time Migration (PSTM). Linux cluster
processing .
Domain migration depth (Depth Migration)
A series of modeling depth velocity and the migration is complete including
methods Kichhoff, CRAM, RTM, Phase Shift, tomography, ES360
Reservoir Analysis
Integrated Seismic Data processing, advanced imaging and AVO analysis. A
series of sophisticated software, unique workflow that is suitable for geological
conditions in Indonesia. The staff were very competent and experienced.
Multi-Client Projects
In partnership with the PND, our partner has produced a data library in
Indonesia. Allows quick access to models of regional basin.
Data Transcription
Solve problems with your old data, get the value of the old data, the safe
handling and writing bad media. Database and archiving services for the
catalog and on-line availability of geological data and geophysical your
company.
We produces QUALITY outstanding on SERVICES to provide to our clients
with VALUE good.
Our policy on quality control , health and safety, employment and
environment are reviewed periodically to ensure they are in accordance with
the practical and international standards.
COMPANY STRUCTURE
COPY OF PETRONAS LICENSE