Upload
hoangliem
View
212
Download
0
Embed Size (px)
Citation preview
TILLAGEField Cultivators
9700 CTSIn-Line Ripper
9800 Disc Ripper HarrowMoldboard Plows
SALF
ORD
TILL
AGE
TILLAGE TOOLS FOR TODAY’S FARMER
It started in 1978 with a cultivator. Designed and manufactured by founder Jake Rozendaal at his shop in southwestern Ontario, the 12-foot-wide tillage tool was the first product to bear the Salford name.
Today, Salford is a leading manufacturer of tillage equipment, offering a complete line of conventional, conservation and no-till products designed to improve soil productivity and yield potential. When it
comes to tillage, farmers around the globe turn to Salford.
CULTIVATORSBuilt for strength, durability and performance. Unique features like hydraulic self-leveling and the Land
Hugger fully floating frame set Salford cultivators apart.
DISC RIPPER HARROWSWith their powerful reset systems the 9700 and 9800 go deep and stay there to provide complete soil
density reduction. Their high clearance frames and shanks layout combine with Salford's HD finishing systems to leave a field finish that is ready for spring.
IN-LINE RIPPER
Make hardpan problems history and improve drainage. Engineered to correct compaction problems and improve aeration and drainage. Designed for hard use and deep subsurface penetration.
MOLDBOARD PLOWSDesigned for non-stop, high residue plowing and made to fit any farming operation with options from 3 to
16 bottoms. Salford moldboard plows have exceptional clearance and a durable frame design to conquer tough residue and keep up with today’s high horsepower tractors.
T I L L A G E | 3 www.salfordgroup.com
9700 CTS (Conservation Tillage Specialist) 4 -5
9800 Disc Ripper Harrow (Primary Tillage) 6 -7
9200 In-Line Ripper 8-9
Cultivators 10-13
450 Field Cultivators
550 Field Cultivators
700 Field Cultivators
Moldboard Plows 14-17
Model 4200 Semi Mounted (3-7 bottoms)
Model 6200 Hydraulic Variable Width (4-7 bottoms)
Model 7200 On-Land / In-Furrow (6-7 bottoms)
Model 8200 Tandem Flex-Trail (7-14 bottoms)
Model 8300 Tandem Flex-Trail, Hydraulic Variable Width, (12,14,16 bottoms)
Product Specifications 18-19
4 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
CONSERVE SOIL AND ELIMINATE COMPACTION – Eliminate deep compaction and manage high volume residue while
leaving a level finish. Equip with low disturbance points for a conservation finish.
INNOVATIVE SHANK PACKAGE – Handles chisel shanks or parabolic shanks for desired soil density reduction.
TIGHT SHANK SPACING – 16" shank spacing for complete soil density reduction and superior leveling.
UNPARALLELED OBSTACLE PROTECTION – 1.5" gang shaft is protected by heavy-duty trip spring and backed up by a
hydraulic bypass system.
POWERFUL TRIP PRESSURE – Power through compaction with 2,600 lbs standard trip pressure and up to and industry
leading 4,000 lbs with optional third reset spring.
9700 CTS SpecificationsOperating Depth 4"-16"Operating Speed (mph) 5 - 6.5% of Residue Buried in One Pass 30 - 60%Seed Bed Preparation AveragePrimary Tillage ExcellentField Leveling ExcellentWeed Control ExcellentIncorporation of Chemical/Fertilizer ExcellentResidue Management ExcellentSurface Compaction Removal ExcellentDeep Compaction Removal (+12") ExcellentLand Reclamation Excellent
Parabolic Ripper Points - 7" or 10" wing
The 1 1/4" shank is a standard size and accepts many competitor wear parts.
2 1/2" Ripper Point with 10" wing
3" Straight Shovel point with 10" wing
Chisel Shank Parabolic Shank
9700 CTS
CONSERVE SOIL AND ELIMINATE COMPACTION – Eliminate deep compaction and manage high volume residue while
leaving a level finish. Equip with low disturbance points for a conservation finish.
INNOVATIVE SHANK PACKAGE – Handles chisel shanks or parabolic shanks for desired soil density reduction.
TIGHT SHANK SPACING – 16" shank spacing for complete soil density reduction and superior leveling.
UNPARALLELED OBSTACLE PROTECTION – 1.5" gang shaft is protected by heavy-duty trip spring and backed up by a
hydraulic bypass system.
POWERFUL TRIP PRESSURE – Power through compaction with 2,600 lbs standard trip pressure and up to and industry
leading 4,000 lbs with optional third reset spring.
T I L L A G E | 5 www.salfordgroup.com
Disc Gang OptionsStraight Blades
Equip the 9700 CTS with straight blades for conservation soil
density reduction.
Coulters
Wavy blades on the CTS provide improved residue resizing and waste
incorporation, but still maintain less soil disturbance than concave blades.
1/2" 3 bar tine 1/2" 3 bar tine and 14" rolling harrow
Standard Harrow Options
The Conservation Tillage Specialist
9800 DRH SpecificationsOperating Depth 6"-13"Operating Speed (mph) 5-6.5% of Residue Buried in One Pass 50-70Seed Bed Preparation AveragePrimary Tillage ExcellentField Leveling ExcellentWeed Control ExcellentIncorporation of Chemical/Fertilizer GoodResidue Management ExcellentSurface Compaction Removal ExcellentDeep Compaction Removal (+12") ExcellentLand Reclamation Excellent
Parabolic Ripper Points - 7" or 10" wing
The 1 1/4" shank is a standard size and accepts many competitor wear parts.
2 1/2" Ripper Point with wing
3" Straight Shovel point with 10" wing
Chisel Shank Parabolic Shank MAXIMUM RESIDUE PROCESSING – High clearance (44" under frame) disc ripper designed for complete soil density reduction
and superior leveling power in high volume residue.
COMPOUND BLADE ANGLE – Two rows of independently mounted 24" blades are mounted on a compound angle for
improved residue incorporation.
INNOVATIVE SHANK PACKAGE – Parabolic or chisel ripper shanks go below ground to disrupt crop root systems and soil
compaction.
MAXIMUM TRIP PRESSURE – 2,600 lbs of standard shank pressure and up to 4,000 lbs with optional third reset spring.
Active hydraulics on the disc gang linkage allow for quick down pressure adjustments based on operating depth.
6 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
9800 DISC RIPPER HARROW
MAXIMUM RESIDUE PROCESSING – High clearance (44" under frame) disc ripper designed for complete soil density reduction
and superior leveling power in high volume residue.
COMPOUND BLADE ANGLE – Two rows of independently mounted 24" blades are mounted on a compound angle for
improved residue incorporation.
INNOVATIVE SHANK PACKAGE – Parabolic or chisel ripper shanks go below ground to disrupt crop root systems and soil
compaction.
MAXIMUM TRIP PRESSURE – 2,600 lbs of standard shank pressure and up to 4,000 lbs with optional third reset spring.
Active hydraulics on the disc gang linkage allow for quick down pressure adjustments based on operating depth.
1/2" 3 bar tine 1/2" 3 bar tine and 14" rolling harrow
Standard Harrow Options
Double 14" rolling harrow
Compound Blades
The 9800's independently mounted blades are set on a compound angle, tipped under and open to improve ground penetration and bury more residue.
T I L L A G E | 7 www.salfordgroup.com
Conventional Tillage, Exceptional Results
DOUBLE DOWN – Double frame design for maximum trip force and years of dependable performance correcting compaction problems
and improving aeration and drainage.
AUTO RESET – 4,000 lbs standard trip pressure for superior re-entry power.
CLEAR THE WAY – 16" trip height and 39" underframe clearance for maximum obstacle protection.
REVERSE IT – 9200 shanks are equipped with reversible shins and accept industry standard points.
9200 SpecificationsOperating Depth 7"-16"Operating Speed (mph) 4-6% of Residue Buried in One Pass 10-15Seed Bed Preparation PoorPrimary Tillage N/AField Leveling PoorWeed Control PoorIncorporation of Chemical/Fertilizer PoorResidue Management AverageSurface Compaction Removal GoodDeep Compaction Removal (+12") ExcellentLand Reclamation Good
8 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
9200 IN-LINE RIPPER
DOUBLE DOWN – Double frame design for maximum trip force and years of dependable performance correcting compaction problems
and improving aeration and drainage.
AUTO RESET – 4,000 lbs standard trip pressure for superior re-entry power.
CLEAR THE WAY – 16" trip height and 39" underframe clearance for maximum obstacle protection.
REVERSE IT – 9200 shanks are equipped with reversible shins and accept industry standard points.
3 4000 lbs standard trip pressure.
4 Reversible shin.
1 6"x6" Main beams.
16" Trip height for maximum obstacle protection.5
2 39" Under frame clearance.
3
42
1
5
T I L L A G E | 9 www.salfordgroup.com
The In-Line Ripper
Specifications S-Tine 2 pc S-Tine C-ShankOperating Depth 1.5"-4" 1.5"-4" 2"-4"Operating Speed (mph) 5.5-9 5.5-9 4.5-7% of Residue Buried in One Pass 20-30 20-30 40-50Seed Bed Preparation Excellent Excellent ExcellentPrimary Tillage Poor Poor AverageField Leveling Excellent Excellent ExcellentWeed Control Excellent Excellent ExcellentIncorporation of Chemical/Fertilizer Excellent Excellent ExcellentResidue Management Average Average GoodSurface Compaction Removal Excellent Excellent ExcellentDeep Compaction Removal (+12") N/A N/A N/ALand Reclamation Poor Poor Average
S-Tine Models C-Shank Models2 Piece S-Tine Models
10 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
450/550/700 CULTIVATORS
READY FOR ANY FARM – 3 model types range in size from 12 ft to 62 ft and can be equipped with standard S-Tines, higher
clearance 2 piece S-Tines or heavy C-Shanks*.
FULLY LOADED FEATURE SET – Hydraulic single point depth control, hydraulic self leveling frame and walking tandems are
all standard features on Salford field cultivators. Add heavy duty tow hitches for your packer.
ENGINEERED FOR A LIFE TIME OF SERVICE – Salford field cultivators are built with oversized frames, axles and hinge
points for years of dependable service and less down time.
S-TINE CULTIVATORS – 20" under frame clearance – with 4" or 5" spacing (available on select models) – and 3" Super Gold, long
life cast shovel. 110 lbs – 200 lbs operating pressure**.
2 PIECE S-TINE CULTIVATORS – 26" under frame clearance – with 4.5" spacing (available on select models) – and 4" Super Gold, long life cast shovel. 110 lbs – 200 lbs operating pressure**.
C-SHANK CULTIVATORS – 26" under frame clearance – with 7" or 9" spacing (available on select models) – and replaceable nylon pivot bushing for worry free operation with no greasing. 200 lbs – 270 lbs adjustable operating pressure.
*Not all shank and shank spacing options are available in every model size.
**S-Tine tip pressure varies during operation as the tine vibrates in soil.
C-Shank Models
1/2" 3 bar tine
1/2" 3 bar tine and 11" rolling harrow
1/2" 3 bar tine and 14" rolling harrow
* 3/8" 2 Bar Tine Double 11" rolling harrow and not available on C-Shank models
Standard Harrow Options
3/8" 2 Bar Tine and Double 11" rolling harrow*
T I L L A G E | 11 www.salfordgroup.com
First-Class Cultivators
Model 700 40'-62'
HEAVY DUTY FRAME 1 1/2” diameter oversized pins and hardened steel bushing enhance durability and reduce maintenance intervals.
HYDRAULIC SELF LEVELING FRAMEHydraulic self leveling frames are standard on all models. The advantage of fewer hinge points is greatly reduced wear and lower maintenance costs.
12 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
LAND HUGGER FLOATING FRAME Available on cultivators 40' and over the Land Hugger fully floating frame provides precise depth control in rolling terrain.
450/550/700 CULTIVATOR FEATURES
Model 450 12'-25'
6 bar deep frames ensure exceptional residue clearance and flow.
Model 550 28'-40'
TANDEM AXLESTandem axles carry your equipment evenly over rough terrain providing maximum leveling performance.
T I L L A G E | 13 www.salfordgroup.com
450/550/700 CULTIVATOR FEATURES
SpecificationsOperating Depth 6"-10"Operating Speed (mph) 4-6.5% of Residue Buried in One Pass 85-90Seed Bed Preparation PoorPrimary Tillage ExcellentField Leveling Very GoodWeed Control ExcellentIncorporation of Fertilizer ExcellentResidue Management ExcellentSurface Compaction Removal ExcellentDeep Compaction Removal (+12") N/ALand Reclamation Excellent
Salford IH style bottom Optional CoverboardsEuropean S8 style bottom
Model 8300 • 12-16 Bottoms
14 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
4200/6200/7200/8200/8300 MOLDBOARD PLOWS
READY FOR TOUGH RESIDUE – Exceptional clearance and a durable frame designed for tough residue tillage and high
horsepower tractors.
PLOW YOUR WAY – Models from 3-16 bottoms for medium to large operations. 14" - 16" - 18" - 20" plowing widths.
FOUR-WAY FLEX – 8200 and 8300 Tandem Flex Trail Plows flex side to side or up and down in the center, providing exceptional
steering and contouring ability.
■ Model 6200 Hydraulic Vari-Width
AC
D
B
A
C
D
B
Plow coulter is spaced 17" from the shank.
40" Fore / Aft clearance between shanks.
35" Underbeam clearance.
14" of trip travel. Optional 3rd reset spring provides almost 4000 lbs total trip pressure.
Model 7200 • 6-7 Bottoms
T I L L A G E | 15 www.salfordgroup.com
Next Stop: Higher Yields
Model 8200 Tandem Flex-Trail • 7-14 Bottoms
8"X8" MAIN FRAMESalford plows are built on heavy 8"x8" main frames to reduce costly down time and protect your investment for years to come.
ADJUSTABLE WIDTH4200, 7200 and 8200 plows feature manually adjustable furrow widths from 14"-20". Models 6200 and 8300 feature hydraulic Vari-Width with 12"-20" settings (Photo courtesy of Beck's Hybrids, Atlanta, IN)
16 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
4200/6200/7200/8200/8300 MOLDBOARD PLOWS
Model 4200 • 3-7 BottomsModel 6200 Hydraulic Variable Width • 4-7 Bottoms
HYDRAULIC STEERINGSalford plows are big, but hydraulic steering makes backing up and maneuvering our plows no big deal. (Photo courtesy of Beck's Hybrids, Atlanta, IN)
Durable, spring loaded coulter assembly with 20” inch rippled blade is standard on Salford plows.
Optional 3rd trip spring provides up to 4000 lbs of trip pressure.
T I L L A G E | 17 www.salfordgroup.com
9700 CTS - Conservation Tillage Specialist
Model Working Width Number of Blades Blade Spacing Number of Shanks Shank SpacingApprox. Weight
w/o HarrowH.P. Required
9707 9'4" 14 8" 7 16" 7,100 lbs 150-245
9709 12' 18 8" 9 16" 8,500 lbs 240-315
9711 14'8" 22 8" 11 16" 10,000 lbs 300-375
9713 17'4" 26 8" 13 16" 13,300 lbs 375-450
9713 WF 17'4" 26 8" 13 16" 14,300 lbs 375-450
9715 WF 20' 30 8" 15 16" 15,800 lbs 425-525
9800 DRH - Disc Ripper Harrow
Working Width
Number of Discs
Disc SpacingNumber of
ShanksShank Spacing Transport Width
Axle Configuration
Approx. Weight w/o Harrows
Est. HP Required
13' 16 11" 7 22" 15'1" Single 11,300 lbs 175-280
15'8" 20 10" 9 20" 18'3" Tandem 18,000 lbs 225-360
19' Rigid 24 10" 11 20" 21'6" Tandem 22,200 lbs 275-440
19' Wing Fold 24 10" 11 20" 12'6" Tandem 22,700 lbs 275-440
22' Rigid 28 10" 13 20" 12'6" Tandem 26,000 lbs 325-525
22' Wing Fold 28 10" 13 20" 12'6" Tandem 26,500 lbs 325-525
9200 In-Line RipperModel # of Shanks
and BladesShank and
Blade Spacing
Approx. Weight
H.P. Required
9203 3 30" 2,700 lbs 100-1209204 4 30" 3,600 lbs 120-1609205 5 30" 4,500 lbs 150-2009206 6 30" 5,300 lbs 180-2409207 7 30" 6,500 lbs 210-280
4200 Semi Mounted, In Furrow, Moldboard Plow
Model # of Furrows Aprrox. Weight H.P. Required4203 3 2,500 lbs 75-1054204 4 3,200 lbs 100-1404205 5 4,100 lbs 125-175
4206* 6 5,200 lbs 150-210 4207* 7 6,100 lbs 175-245
* Bridged Main Frame
8200 Tandem Flex Trail Moldboard Plow
Model # of Furrows Aprrox. Weight H.P. Required8207 7 (4+3) 5,700 lbs 175-2458208 8 (4+4) 6,400 lbs 200-2808209 9 (5+4) 7,300 lbs 225-3158210 10 (5+5) 8,200 lbs 250-3508211 11 (5+6) 9,300 lbs 275-3858212 12 (6+6) 10,400 lbs 300-4208213 13 (6+7) 11,300 lbs 325-4558214 14 (6+8) 12,200 lbs 350-490
6200 Semi Mounted, In Furrow, Moldboard Plow with Hydraulic Variable Width
Model # of Furrows Aprrox. Weight H.P. Required6204 4 3,400 lbs 100-1406205 5 4,200 lbs 125-175
6206* 6 5,300 lbs 150-2106207* 7 6,300 lbs 175-245
* Bridged Main Frame
7200 Semi Mounted, In Furrow or On-Land, Moldboard Plow
Model # of Furrows Aprrox. Weight H.P. Required7206* 6 5,300 lbs 150-210 7207* 7 6,300 lbs 175-245
* Bridged Main Frame
8300 Tandem Flex Trail, Hydraulic Variable Width Moldboard Plow
Model # of Furrows Aprrox. Weight H.P. Requiered8312* 12 (6+6) 23,500 lbs 300-4208314* 14 (6.8) 26,000 lbs 350-4908316* 16 (8+8) 27,500 lbs 400-560
* Bridged Main Frame18 | T I L L A G E AT SALFORD WE ARE ALWAYS WORKING TO IMPROVE. SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
Specifications
700 Field Cultivators
Working Width6 - Bar S-Tine models
Number of tines2 Piece S-Tine models
Number of tinesC-Shank ModelsNumber of tines
Transport Width (Approx.)
Transport Height(Approx.)
H.P. Required
4" 5" 4.5" 7” 9"40' N/A N/A N/A 68 54 20'2" 15'10" 210-250
44'** 132 105 116 75 58 18'11" 14'4" 220-260 50'** 150 119 132 85 66 18'11" 14'4" 250-300 62'** 184 147 164 104 82 20'11" 15'6" 310-400
** Bi-fold Frame
550 Field Cultivators
Working Width6 - Bar S-Tine models
Number of tines2 Piece S-Tine models
Number of tinesC-Shank ModelsNumber of tines
Transport Width (Approx.)
Transport Height(Approx.)
H.P. Required
4" 5" 4.5" 7"28' 84 67 N/A 45 15'3" 12'10" 140-17030' 90 73 80 51 16'4" 14'2" 150-18032' 96 77 N/A 55 18'4" 13'10" 160-190
40'** 120 97 108 69 18'11" 12'3" 200-240
** Bi-fold Frame
450 Field Cultivators
Working Width
6 - Bar S-Tine modelsNumber of tines
2 Piece S-Tine modelsNumber of tines
C-Shank ModelsNumber of tines Transport Width
(Approx.)Transport Height
(Approx.)H.P.
Required4" 4.5" 7"
12' 36 32 21 12'4" 4'10" 60-8017' 54 48 31 12'9" 10'9" 80-10019' 58 52 33 12'9" 11'5" 95-11521' 64 56 37 12'9" 12'3" 100-12523' 68 60 39 12'9" 13' 115-14025' 76 66 43 12'9" 13'8" 125-150
T I L L A G E | 19 www.salfordgroup.com
Osceola, Iowa • Cornelia, Georgia • Ontario, Canada
Phone: 519-485-1293 Toll Free: 1-866-442-1293
Email: [email protected]
www.salfordgroup.com
INDEPENDENT SERIES I-1100I-1200I-1500I-2100I-4100I-5100
TILLAGE9700 CTS9800 DRH9200 IN-LINE RIPPERMOLDBOARD PLOWSCULTIVATORSUNIVERSAL HARROWS
FERTILIZER & NUTRIENT APPLICATIONPRODUCER SERIESMAGNASPREADENDURANCELIBERTYGRASSHOPPERCRICKETTROOPERAIR CARTSI-SERIES FERTILIZING
SEEDING 520 AIR DRILLS525 AIR DRILLSAIR CARTSI-SERIES SEEDING
SALFORD TILLAGE 201504