Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
TTHHÖÖ VVIIEEÄÄNN TTRRÖÖÔÔØØNNGG ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
SSAAÛÛNN PPHHAAÅÅMM TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTiieeââuu cchhuuaaåånn KKhhooaa hhooïïcc –– CCooâânngg nngghheeää
VViieeäätt NNaamm && TThheeáá ggiiôôùùii 1122//22001144
1122//22001144
hhttttpp::////lliibb..iiuuhh..eedduu..vvnn
2
DANH MUÏC TIEÂU CHUAÅN THAÙNG 12/2014
GOÀM COÙ:
1.10 TIÊU CHUẨN QUỐC GIA (TCVN)
2.106 TIÊU CHUẨN ISO
4. 42 TIÊU CHUẨN IEC
5. 42 TIÊU CHUẨN ASTM
6.13 TIÊU CHUẨN JIS
Bạn đọc có nhu cầu thông tin toàn văn các văn bản trong danh mục, vui lòng
email đến [email protected] gồm thông tin sau:
Họ tên – MSSV – Lớp học – Khóa học – Email – Số điện thoại liên hệ hoặc
Họ tên – MS Nhân viên/Giảng viên – Khoa/ Đơn vị công tác – Email – Số
điện thoại liên hệ.
Hoặc liên hệ qua trang web YÊU CẦU TIN của Thư viện
(http://goo.gl/PCIOC6)
Thông tin được cung cấp miễn phí và nhanh chóng cho bạn đọc Thư viện Đại
học Công nghiệp Thành phố Hồ Chí Minh.
Hân hạnh phục vụ bạn đọc
3
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
1 TCVN 10299-1:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 1: Quy định chung.
20
2 TCVN 10299-2:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 2: Thẩm định và công nhận tổ chức
thực hiện hoạt động rà phá bom mìn, vật nổ.
15
3 TCVN 10299-3:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 3: Giám sát và đánh giá tổ chức
thực hiện hoạt động rà phá bom mìn, vật nổ.
16
4 TCVN 10299-4:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 4: Điều tra và khảo sát về ô nhiễm
bom mìn, vật nổ.
30
5 TCVN 10299-5:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 5: Công tác an toàn trong hoạt động
rà phá bom mìn, vật nổ.
11
6 TCVN 10299-6:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 6: Công tác rà phá bom mìn, vật nổ.
24
7 TCVN 10299-7:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 7: Xử l. bom mìn, vật nổ
26
8 TCVN 10299-8:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 8: Bảo đảm y tế.
19
9 TCVN 10299-9:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 9: Điều tra sự cố bom mìn, vật nổ.
19
10 TCVN 10299-10:2014 Khắc phục hậu quả bom mìn, vật nổ sau chiến
tranh - Phần 10: Thu thập, xử lý, lưu trữ và cung
cấp thông tin.
43
TIÊU CHUẨN ISO
4
11 ISO 16119-4:2014 Agricultural and forestry machinery --
Environmental requirements for sprayers -- Part
4: Fixed and semi-mobile sprayers.
19
12 ISO 9635-5:2014 - Revises:
ISO 9635-5:2006
Agricultural irrigation equipment – Irrigation
valves -- Part 5: Control valves.
13
13 ISO 15845:2014 Aircraft ground equipment – Boarding –vehicle
for persons with reduced mobility - Functional
and safety requirements.
21
14 ISO 19600:2014 Compliance management systems –Guidelines. 28
15 ISO 14739-1:2014 Document management -- 3D use of Product
Representation Compact (PRC) format -- Part 1:
PRC 10001.
284
16 ISO 14289-1:2014 -
Revises: ISO 14289-1:2012
Document management applications --Electronic
document file format enhancement for
accessibility -- Part 1: Use of ISO 32000-1
(PDF/UA-1).
17
17 ISO 9735-10:2014 -
Revises: ISO 9735-10:2002
Electronic data interchange for administration,
commerce and transport (EDIFACT) --
Application level syntax rules (Syntax version
number: 4, Syntax release number: 2) -- Part 10:
Syntax service directories.
112
18 ISO 12651-2:2014 -
Revises: ISO 12651:1999
Electronic document management --Vocabulary
-- Part 2: Workflow management.
9
19 ISO 50004:2014 Energy management systems – Guidance for the
implementation, maintenance and improvement
of an energy management system.
42
20 ISO 50015:2014 Energy management systems – Measurement
and verification of energy performance of
organizations – General principles and guidance.
19
21 ISO 50006:2014 Energy management systems – Measuring 33
5
energy performance using energy baselines
(EnB) and energy performance indicators (EnPI)
– General principles and guidance.
22 ISO/TS 14072:2014 Environmental management – Life cycle
assessment -- Requirements and guidelines for
organizational life cycle assessment.
27
23 ISO 7240-8:2014 - Revises:
ISO 7240-8:2007
Fire detection and alarm systems --Part 8: Point-
type fire detectors using a carbon monoxide
sensor in combination with a heat sensor.
57
24 ISO 6182-12:2014 -
Revises: ISO 6182-12:2010
Fire protection -- Automatic sprinkler systems --
Part 12: Requirements and test methods for
grooved-end components for steel pipe systems.
16
25 ISO 17959:2014 General requirements for solid wood flooring. 13
26 ISO 2692:2014 - Revises:
ISO 2692:2006
Geometrical product specifications (GPS) --
Geometrical tolerancing --Maximum material
requirement (MMR), least material requirement
(LMR) and reciprocity requirement (RPR).
46
27 ISO 13427:2014 - Revises:
ISO 13427:1998
Geosynthetics -- Abrasion damage simulation
(sliding block test).
4
28 ISO 16684-2:2014 Graphic technology – Extensible metadata
platform (XMP) -- Part 2: Description of XMP
schemas using RELAX NG.
39
29 ISO 15341:2014 Graphic technology -- Method for radius
determination of printing cylinders.
17
30 ISO 16760:2014 Graphic technology -- Prepress data exchange --
Preparation and visualization of RGB images to
be used in RGB-based graphics arts workflows.
36
31 ISO/TR 28380-3:2014 Health informatics -- IHE global standards
adoption -- Part 3: Deployment.
18
32 ISO/TS 13131:2014 Health informatics -- Telehealth services -- 32
6
Quality planning guidelines.
33 ISO 12164-3:2014 -
Revises: ISO 12164-3:2008
Hollow taper interface with flange contact
surface -- Part 3: Dimensions of shanks for
stationary tools.
10
34 ISO 12164-4:2014 -
Revises: ISO 12164-4:2008
Hollow taper interface with flange contact
surface -- Part 4: Dimensions of receivers for
stationary tools.
6
35 ISO 4996:2014 - Revises:
ISO 4996:2007
Hot-rolled steel sheet of high yield stress
structural quality.
8
36 ISO/TS 17822-1:2014 In vitro diagnostic test systems --Qualitative
nucleic acid-based in vitro examination
procedures for detection and identification of
microbial pathogens -- Part 1: General
requirements, terms and definitions.
22
37 ISO/TS 10303-1142:2014-
Revises: ISO/TS 10303-
1142:2014
Industrial automation systems and integration ---
Product data representation -and exchange --
Part 1142: Application module: Requirement
view definition relationship.
11
38 ISO/TS 10303-3001:2014 Industrial automation systems and integration --
Product data representation and exchange -- Part
3001: Business object model: Managed model
based 3d engineering.
11
39 ISO/TS 10303-1803:2014 -
Revises: ISO/TS 10303-
1803:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1803: Application module: Process plan.
11
40 ISO/TS 10303-1718:2014 -
Revises: ISO/TS 10303-
1718:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1718: Application module: Layered interconnect
simple template.
11
41 ISO/TS 10303-1707:2014 -
Revises: ISO/TS 10303-
Industrial automation systems and integration --
Product data representation and exchange -- Part
11
7
1707:2014 1707: Application module: Package.
42 ISO/TS 10303-1706:2014 -
Revises: ISO/TS 10303-
1706:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1706: Application module: Non feature shape
element.
11
43 ISO/TS 10303-1698:2014 -
Revises: ISO/TS 10303-
1698:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1698: Application module: Layered interconnect
module design.
11
44 ISO/TS 10303-1686:2014 -
Revises: ISO/TS 10303-
1686:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1686: Application module: Interconnect module
usage view.
11
45 ISO/TS 10303-1650:2014 -
Revises: ISO/TS 10303-
1650:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1650: Application module: Bare die
11
46 ISO/TS 10303-1642:2014 -
Revises: ISO/TS 10303-
1642:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1642: Application module: Assembly module
usage view.
11
47 ISO/TS 10303-1636:2014 -
Revises: ISO/TS 10303-
1636:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1636: Application module: Assembly module
design.
11
48 ISO/TS 10303-1603:2014 -
Revises: ISO/TS 10303-
1603:2014
Industrial automation systems and integration --
Product data representation and exchange -- Part
1603: Application module: Analytical model.
11
49 ISO/TS 10303-1127:2014
Revises: ISO/TS 10303-
1127:2011
Industrial automation systems and integration --
Product data representation and exchange -- Part
1127: Application module: File identification
11
50 ISO/TS 10303-1051:2014 - Industrial automation systems and integration -- 11
8
Revises: ISO/TS 10303-
1051:2014
Product data representation and exchange -- Part
1051: Application module: Geometric tolerance.
51 ISO 10303-522:2014 -
Revises: ISO 10303-
522:2006
Industrial automation systems and integration --
Product data representation and exchange -- Part
522: Application interpreted construct:
Machining features.
11
52 ISO 10303-518:2014 -
Revises: ISO 10303-
518:2011
Industrial automation systems and integration --
Product data representation and exchange -- Part
518: Application interpreted construct:
Mechanical design shaded presentation.
11
53 ISO/TS 10303-442:2014 Industrial automation systems and integration --
Product data representation and exchange -- Part
442: Application module: AP242 managed
model based 3D engineering.
11
54 ISO/TS 10303-410:2014 -
Revises: ISO/TS 10303-
410:2010
Industrial automation systems and integration --
Product data representation and exchange -- Part
410: Application module: AP210 electronic
assembly interconnect and packaging design.
11
55 ISO/TS 10303-409:2014 Industrial automation systems and integration --
Product data representation and exchange -- Part
409: Application module: AP209
multidisciplinary analysis and design.
11
56 ISO 10303-242:2014 -
Revises: ISO 10303-
201:1994; ISO 10303-
202:1996; ISO 10303-
203:2011; ISO 10303-
204:2002; ISO 10303-
214:2010
Industrial automation systems and integration --
Product data representation and exchange -- Part
242: Application protocol: Managed model-
based 3D engineering.
11
57 ISO 10303-210:2014 -
Revises: ISO 10303-
Industrial automation systems and integration --
Product data representation and exchange -- Part
11
9
210:2011 210: Application protocol: Electronic assembly,
interconnect and packaging design.
58 ISO 10303-209:2014 -
Revises: ISO 10303-
209:2001
Industrial automation systems and integration --
Product data representation and exchange -- Part
209: Application protocol: Multidisciplinary
analysis and design.
11
59 ISO 10303-105:2014 -
Revises: ISO 10303-
105:1996; ISO 10303-
105:1996/Cor 1:2000; ISO
10303-105:1996/Cor
2:2000
Industrial automation systems and integration --
Product data representation and exchange -- Part
105: Integrated application resource:
Kinematics.
11
60 ISO 10303-101:2014 -
Revises: ISO 10303-
101:2011
Industrial automation systems and integration --
Product data representation and exchange -- Part
101: Integrated application resource:
Draughting.
11
61 ISO 10303-59:2014 -
Revises: ISO 10303-
59:2008
Industrial automation systems and integration --
Product data representation and exchange -- Part
59: Integrated generic resource -- Quality of
product shape data.
11
62 ISO 10303-45:2014 -
Revises: ISO 10303-
45:2008
Industrial automation systems and integration --
Product data representation and exchange -- Part
45: Integrated generic resource: Material and
other engineering properties.
11
63 ISO 10303-44:2014 -
Revises: ISO 10303-
44:2000; ISO 10303-
44:2000/Cor 1:2001
Industrial automation systems and integration --
Product data representation and exchange -- Part
44: Integrated generic resource: Product
structure configuration.
11
64 ISO 10303-42:2014 -
Revises: ISO 10303-
42:2003
Industrial automation systems and integration --
Product data representation and exchange -- Part
42: Integrated generic resource: Geometric and
11
10
topological representation.
65 ISO 10303-41:2014 -
Revises: ISO 10303-
41:2005; ISO 10303-
41:2005/Cor 1:2008; ISO
10303-41:2005/Cor 2:2010
Industrial automation systems and integration --
Product data representation and exchange -- Part
41: Integrated generic resource: Fundamentals of
product description and support.
11
66 ISO 22915-22:2014 Industrial trucks -- Verification of stability --
Part 22: Lateral- and frontstacking trucks with
and without elevating operator position.
10
67 IWA 17:2014 Information and operations security and integrity
requirements for lottery and gaming
organizations.
14
68 ISO/IEC TR 29181-5:2014 Information technology -- Future Network --
Problem statement and requirements -- Part 5:
Security.
6
69 ISO/IEC TR 29181-2:2014 Information technology -- Future Network --
Problem statement and requirements -- Part 2:
Naming and addressing.
36
70 ISO/IEC 19763-10:2014 Information technology – Metamodel framework
for interoperability (MFI) -- Part 10: Core model
and basic mapping.
32
71 ISO/IEC 24775-5:2014 -
Revises: ISO/IEC
24775:2011
Information technology – Storage management -
- Part 5: File systems.
375
72 ISO/IEC 24775-6:2014 -
Revises: ISO/IEC
24775:2011
Information technology – Storage management -
- Part 6: Fabric.
288
73 ISO/IEC 24775-7:2014 -
Revises: ISO/IEC
24775:2011
Information technology – Storage management -
- Part 7: Host Elements.
132
11
74 ISO/IEC 24752-6:2014 Information technology -- User interfaces --
Universal remote console -- Part 6: Web service
integration.
65
75 ISO/IEC 24752-5:2014 -
Revises: ISO/IEC 24752-
5:2008
Information technology -- User interfaces --
Universal remote console -- Part 5: Resource
description.
30
76 ISO/IEC 24752-4:2014 -
Revises: ISO/IEC 24752-
4:2008
Information technology -- User interfaces --
Universal remote console --Part 4: Target
description.
19
77 ISO/IEC 24752-2:2014 -
Revises: ISO/IEC 24752-
2:2008
Information technology -- User interfaces --
Universal remote console --Part 2: User interface
socket description.
48
78 ISO/IEC 24752-1:2014 -
Revises: ISO/IEC 24752-
1:2008
Information technology -- User interfaces --
Universal remote console --Part 1: General
framework.
44
79 - ISO 15096:2014 -
Revises: ISO 15096:2008
Jewellery -- Determination of silver in 999 0/00
silver jewellery alloys – Difference method
using ICP-OES.
6
80 ISO 24338:2014 - Revises:
ISO 24338:2006
Laminate floor coverings -- Determination of
abrasion resistance.
20
81 ISO 24617-7:2014 Language resource management – Semantic
annotation framework -- Part 7: Spatial
information (ISOspace).
55
82 ISO 8039:2014 - Revises:
ISO 8039:2012
Microscopes -- Values, tolerances and symbols
for magnification.
3
83 ISO 11608-1:2014 -
Revises: ISO 11608-1:2012
Needle-based injection systems for medical use -
- Requirements and test methods -- Part 1:
Needle-based injection systems.
41
84 ISO 3524:2003 - Revises:
ISO 3524:1977
Oil of cinnamon leaf, Sri Lanka type
(Cinnamomum zeylanicum Blume).
7
12
85 ISO 19901-3:2014 -
Revises: ISO 19901-3:2010
Petroleum and natural gas industries --Specific
requirements for offshore structures -- Part 3:
Topsides structure.
117
86 ISO 12736:2014 Petroleum and natural gas industries --Wet
thermal insulation coatings for pipelines, flow
lines, equipment and subsea structures.
74
87 ISO 26422:2014 - Revises:
ISO 26422:2011
Petroleum and related products – Determination
of shear stability of lubricating oils containing
polymers --Method using a tapered roller
bearing.
10
88 ISO 13061-7:2014 -
Revises: ISO 3346:1975
Physical and mechanical properties of wood --
Test methods for small clear wood specimens --
Part 7: Determination of ultimate tensile stress
perpendicular to grain.
5
89 ISO 13061-6:2014 -
Revises: ISO 3345:1975
Physical and mechanical properties of wood --
Test methods for small clear wood specimens --
Part 6: Determination of ultimate tensile stress
parallel to grain.
4
90 ISO 13061-4:2014 -
Revises: ISO 3349:1975
Physical and mechanical properties of wood --
Test methods for small clear wood specimens --
Part 4: Determination of modulus of elasticity in
static bending.
6
91 ISO 13061-3:2014 -
Revises: ISO 3133:1975
Physical and mechanical properties of wood --
Test methods for small clear wood specimens --
Part 3: Determination of ultimate strength in
static bending.
5
92 ISO 24631-5:2014 Radio frequency identification of animals -- Part
5: Procedure for testing the capability of RFID
transceivers of reading ISO 11784 and ISO
11785 transponders.
11
93 ISO 17554:2014 - Revises: Reaction to fire tests -- Mass loss measurement. 21
13
ISO 17554:2005
94 ISO 7967-11:2014 Reciprocating internal combustion engines --
Vocabulary of components and systems -- Part
11: Fuel systems.
22
95 ISO 2005:2014 - Revises:
ISO 2005:1992; ISO
2005:1992/Amd 1:2006
Rubber latex, natural, concentrate --
Determination of sludge content.
5
96 ISO/IEC Guide 50:2014 -
Revises: ISO/IEC Guide
50:2002
Safety aspects -- Guidelines for child safety in
standards and other specifications.
36
97 ISO 8124-1:2014 - Revises:
ISO 8124-1:2012
Safety of toys -- Part 1: Safety aspects related to
mechanical and physical properties.
120
98 ISO 11136:2014 Sensory analysis -- Methodology --General
guidance for conducting hedonic tests with
consumers in a controlled area.
44
99 ISO/PAS 19697:2014 Ships and marine technology – Navigation and
ship operations – Electronic inclinometers.
19
100 ISO 13297:2014 - Revises:
ISO 13297:2012
Small craft -- Electrical systems – Alternating
current installations.
27
101 ISO 22315:2014 Societal security -- Mass evacuation --
Guidelines for planning.
24
102 ISO/IEC 90003:2014 -
Revises: ISO/IEC
90003:2004
Software engineering -- Guidelines for the
application of ISO 9001:2008 to computer
software.
54
103 ISO/TS 18806:2014 Solid mineral fuels -- Determination of Chlorine
content.
11
104 ISO 10294-4:2001/Amd
1:2014
Specific performance requirement for thermal
release mechanism based upon performance of
thermal release mechanism used in ISO 10294-1
test specimen.
2
14
105 ISO 10791-6:2014 -
Revises: ISO 10791-
6:1998; ISO 10791-
6:1998/Cor 1:2004
Test conditions for machining centres - - Part 6:
Accuracy of speeds and interpolations.
50
106 ISO 5667-14:2014 -
Revises: ISO 5667-14:1998
Water quality -- Sampling -- Part 14: - Guidance
on quality assurance and quality control of
environmental water sampling and handling
34
107 ISO 16840-10:2014 Wheelchairs -- Resistance to ignition of non-
integrated seat and back support cushions -- Part
10: Requirements and test methods.
13
TIÊU CHUẨN IEC
108 IEC 62489-1-am1 ed1.0 Amendment 1 – Electroacoustics - Audio-
frequency induction loop systems for assisted
hearing - Part 1: Methods of measuring and
specifying the performance of system
components.
26
109 IEC 60061-2-am48 ed3.0 Amendment 48 - Lamp caps and holders
together with gauges for the control of
interchangeability and safety - Part 2:
Lampholders.
20
110 IEC 60061-3-am49 ed3.0 Amendment 49 - Lamp caps and holders
together with gauges for the control of
interchangeability and safety - Part 3: Gauges.
51
111 IEC 60061-1-am51 ed3.0 Amendment 51 - Lamp caps and holders
together with gauges for the control of
interchangeability and safety - Part 1: Lamp
caps.
23
112 IEC 60901-am6 ed2.0 Amendment 6 - Single-capped fluorescent lamps
– Performance specifications.
197
113 IEC/TR 80001-2-5 ed1.0 Application of risk management for IT-networks
incorporating medical devices - Part 2-5:
39
15
Application guidance – Guidance on distributed
alarm systems.
114 IEC 61196-1-200 ed2.0 Coaxial communication cables -Part 1-200:
Environmental test methods - General
requirements.
13
115 IEC 62776 ed1.0 Double-capped LED lamps designed to retrofit
linear fluorescent lamps – Safety specifications.
59
116 IEC 61557-9 ed3.0 Electrical safety in low voltage distribution
systems up to 1 000 V a.c. and 1 500 V d.c. –
Equipment for testing, measuring or monitoring
of protective measures - Part 9: Equipment for
insulation fault location in IT systems.
55
117 IEC 61557-8 ed3.0 Electrical safety in low voltage distribution
systems up to 1 000 V a.c. and 1 500 V d.c. –
Equipment for testing, measuring or monitoring
of protective measures - Part 8: Insulation
monitoring devices for IT systems.
95
118 IEC 62489-1 ed1.1 Consol.
with am1
Electroacoustics - Audio-frequency induction
loop systems for assisted hearing - Part 1:
Methods of measuring and specifying the
performance of system components.
123
119 IEC 60118-4 ed3.0 Electroacoustics - Hearing aids -Part 4:
Induction-loop systems for hearing aid purposes
– System performance requirements.
109
120 IEC 60318-3 ed2.0 Electroacoustics - Simulators of human head and
ear - Part 3: Acoustic coupler for the calibration
of supra-aural earphones used in audiometry.
24
121 IEC 61340-4-8 ed2.0 Electrostatics - Part 4-8: Standard test methods
for specific applications - Electrostatic discharge
shielding - Bags
25
122 IEC 60079-18 ed4.0 Explosive atmospheres - Part 18: Equipment 72
16
protection by encapsulation “m”.
123 IEC 61753-031-3 ed2.0 Fibre optic interconnecting devices and passive
components - Performance standard – Part 031-
3: Non-connectorized single- mode 1×N and
2×N nonwavelength- selective branching
devices for Category U – Uncontrolled
environment.
19
124 IECQ 03-3-2 ed2.0 IEC Quality Assessment System for Electronic
Components (IECQ System) - Rules of
Prodecure - Part 3-2: IECQ Approved
Component Products, Related Materials &
Assemblies Scheme, IECQ Approved
Component - Automotive Qualification
Programme (IECQ AC-AQP).
28
125 IECQ 03-5 ed4.0 IEC Quality Assessment System for Electronic
Components (IECQ System) - Rules of
Procedure - Part 5: IECQ HSPM Scheme -
Hazardous Substance Process Management
Requirements.
12
126 IECQ 04-3-2 ed1.0 IEC Quality Assessment System for Electronic
Components (IECQ System) – Standard
Training - Part 3-2: Standard operational
procedures for conducting IECQ AC-AQP
Training.
7
127 IEC 60061-DB-12M
Subscription
Lamp caps and holders together with gauges for
the control of interchangeability and safety - 12-
month subscription to online database
comprising all parts of IEC 60061.
128 IEC 60809 ed3.0 Lamps for road vehicles - Dimensional,
electrical and luminous requirements.
162
129 IEC 60810 ed4.0 Lamps for road vehicles – Performance 129
17
requirements.
130 IEC 61557-16 ed1.0 lectrical safety in low voltage distribution
systems up to 1 000 V a.c. and 1 500 V d.c –
Equipment for testing, measuring or monitoring
of protective measures - Part 16: Equipment for
testing the effectiveness of the protective
measures of electrical equipment and/or medical
electrical equipment.
38
131 IEC 62717 ed1.0 LED modules for general lighting - Performance
requirements.
96
132 IEC/TR 62699-1 ed1.0 Mapping rules and exchange methods for
heterogeneous electronic parts libraries - Part 1:
Building an integrated search system.
31
133 IEC 61786-2 ed1.0 Measurement of DC magnetic, AC magnetic and
AC electric fields from 1 Hz to 100 kHz with
regard to exposure of human beings - Part 2:
Basic standard for measurements.
71
134 IEC/PAS 60127-8 ed1.0 Miniature fuses - Part 8: Fuse resistors with
particular overcurrent protection.
25
135 IEC 61892-7 ed3.0 Mobile and fixed offshore units - Electrical
installations - Part 7: Hazardous areas.
174
136 IEC 61892-SER ed1.0 Mobile and fixed offshore units -Electrical
installations – ALL PARTS.
486
137 IEC 61290-1 ed1.0 Optical amplifiers - Test methods - Part 1:
Power and gain parameters.
28
138 IEC/TS 62789 ed1.0 Photovoltaic concentrator cell documentation. 36
139 IEC 62894 ed1.0 Photovoltaic inverters – Data sheet and name
plate.
25
140 IEC/PAS 62396-6 ed1.0 Process management for avionics - Atmospheric
radiation effects - Part 6: Extreme space weather
72
18
and potential impact on the avionics
environment and electronics.
141 IEC 62744 ed1.0 Representation of states of objects by graphical
symbols.
62
142 CISPR 16-1-6 ed1.0 Specification for radio disturbance and immunity
measuring apparatus and methods - Part 1- 6:
Radio disturbance and immunity measuring
apparatus – EMC antenna calibration.
360
143 CISPR 16-1-6 ed1.0 Specification for radio disturbance and immunity
measuring apparatus and methods - Part 1-6:
Radio disturbance and immunity measuring
apparatus – EMC antenna calibration.
360
144 IEC 62885-3 ed1.0 Surface cleaning appliances - Part 3: Wet carpet
cleaning appliances - Methods for measuring the
performance.
22
145 IEC/TRF 60335-2-100
ed2.0
This Test Report applies to: IEC 60335-2-
100:2002 (First Edition) in conjunction with IEC
60335-1:2010 (Fifth Edition) incl. Corr. 1:2010
and Corr. 2:2011 + A1:2013.
146 IEC/TRF 60335-2-24
ed11.0
This Test Report applies to: IEC 60335-2-
24:2010 (Seventh Edition) + A1:2012 in
conjunction with IEC 60335-1:2010 (Fifth
Edition) incl. Corr. 1:2010 and Corr. 2:2011 +
A1:2013.
147 IEC/TRF 61347-2-13 ed5.0 This Test Report applies to: IEC 61347-2-
13:2014 (Second Edition) used in conjunction
with IEC 61347-1:2007 (Second Edition) +
A1:2010 + A2:2012.
148 IEC/TRF 61643-21 ed3.0 This Test Report applies to: IEC 61643 21:2000
(First Edition) + A1:2008 + A2:2012.
149 IEC/TRF 62841-3-1 ed1.0 This Test Report applies to: IEC 62841-3-1:2014
19
(First Edition), used in conjunction with IEC
62841-1: 2014 (First Edition) + C1:2014.
TIÊU CHUẨN ASTM
150 ASTM E2947 – 14 Standard Guide for Building Enclosure
Commissioning.
22
151 ASTM D5237 – 14 -
Replaces: ASTM D5237-
05(2013)
Standard Guide for Evaluating Fabric Softeners. 7
152 ASTM C925 - 09(2014) -
Replaces: ASTM C925-09
Standard Guide for Precision Electroformed Wet
Sieve Analysis of Nonplastic Ceramic Powders.
3
153 ASTM C1791 - 14a -
Replaces: ASTM C1791-14
Standard Guide for Reduction of Efflorescence
Potential in New Unit Pavement Systems.
3
154 ASTM C1552 - 14a -
Replaces: ASTM C1552-14
Standard Practice for Capping Concrete
Masonry Units, Related Units and Masonry
Prisms for Compression Testing.
5
155 ASTM F482 - 09(2014) -
Replaces: ASTM F482-09
Standard Practice for Corrosion of Aircraft
Metals by Total Immersion in Maintenance
Chemicals.
5
156 ASTM C1164 – 14 -
Replaces: ASTM C1164-
92(2009)
Standard Practice for Evaluation of Limestone or
Lime Uniformity From a Single Source.
3
157 ASTM C1023 - 10(2014) -
Replaces: ASTM C1023-10
Standard Practice for Labeling Ceramic Art
Materials for Chronic Adverse Health Hazards.
7
158 ASTM F733 - 09(2014) -
Replaces: ASTM F733-09
Standard Practice for Optical Distortion and
Deviation of Transparent Parts Using the
Double-Exposure Method.
5
159 ASTM F1105 - 09(2014) -
Replaces: ASTM F1105-09
Standard Practice for Preparing Aircraft
Cleaning Compounds, Liquid-Type,
Temperature-Sensitive, or Solvent-Based, for
Storage Stability Testing.
2
20
160 ASTM F483 - 09(2014) -
Replaces: ASTM F483-09
Standard Practice for Total Immersion Corrosion
Test for Aircraft Maintenance Chemicals.
4
161 ASTM C222 - 97(2014)
Replaces: ASTM C222-
97(2008)
Standard Specification for Asbestos- Cement
Roofing Shingles.
4
162 ASTM C221 - 98(2014) -
Replaces: ASTM C221-
Standard Specification for Corrugated Asbestos-
Cement Sheets 98(2008).
4
163 ASTM C1288 – 14 -
Replaces: ASTM C1288-
99(2010)
Standard Specification for Discrete Non-
Asbestos Fiber-Cement Interior Substrate
Sheets.
4
164 ASTM C206 – 14 -
Replaces: ASTM C206-
03(2009)
Standard Specification for Finishing Hydrated
Lime.
2
165 ASTM C1518 - 04(2014) -
Replaces: ASTM C1518-
04(2009)
Standard Specification for Precured Elastomeric
Silicone Joint Sealants.
4
166 ASTM C1786 – 14 Standard Specification for Segmental Precast
Reinforced Concrete Box Sections for Culverts,
Storm Drains, and Sewers Designed According
to AASHTO LRFD.
11
167 ASTM F3060 – 14 Standard Terminology for Aircraft. 15
168 ASTM C1378 - 04(2014) -
Replaces: ASTM C1378-
04(2009)
Standard Test Method for Determination of
Resistance to Staining.
3
169 ASTM D1929 – 14 -
Replaces: ASTM D1929-
13a
Standard Test Method for Determining Ignition
Temperature of Plastics.
6
170 ASTM C1182 - 09(2014) -
Replaces: ASTM C1182-09
Standard Test Method for Determining the
Particle Size Distribution of Alumina by
Centrifugal Photosedimentation.
3
21
171 ASTM F1164 - 97(2014) -
Replaces: ASTM F1164-
97(2009)e1
Standard Test Method for Evaluation of
Transparent Plastics Exposed to Accelerated
Weathering Combined with Biaxial Stress.
4
172 ASTM E546 – 14 -
Replaces: ASTM E546-08
Standard Test Method for Frost/Dew Point of
Sealed Insulating Glass Units.
6
173 ASTM D3763 – 14 -
Replaces: ASTM D3763-
10e1
Standard Test Method for High Speed Puncture
Properties of Plastics Using Load and
Displacement Sensors.
10
174 ASTM F428 - 09(2014) -
Replaces: ASTM F428-09
Standard Test Method for Intensity of Scratches
on Aerospace Glass Enclosures.
4
175 ASTM F548 - 09(2014) -
Replaces: ASTM F548-09
Standard Test Method for Intensity of Scratches
on Aerospace Transparent Plastics.
4
176 ASTM C895 - 87(2014) -
Replaces: ASTM C895-
87(2009)
Standard Test Method for Lead and Cadmium
Extracted from Glazed Ceramic Tile.
3
177 ASTM F1181 - 09(2014) -
Replaces: ASTM F1181-09
Standard Test Method for Measuring Binocular
Disparity in Transparent Parts.
3
178 ASTM C837 - 09(2014) -
Replaces: ASTM C837-09
Standard Test Method for Methylene Blue Index
of Clay.
2
179 ASTM D3420 – 14 -
Replaces: ASTM D3420-
08a
Standard Test Method for Pendulum Impact
Resistance of Plastic Film.
6
180 ASTM D1460 - 86(2014) -
Replaces: ASTM D1460-
86(2010)
Standard Test Method for Rubber Property--
Change in Length During Liquid Immersion.
3
181 ASTM D1456 - 86(2014) -
Replaces: ASTM D1456-
86(2010)
Standard Test Method for Rubber Property--
Elongation at Specific Stress.
5
182 ASTM D814 - 95(2014) -
Replaces: ASTM D814-
Standard Test Method for Rubber Property--
Vapor Transmission of Volatile Liquids.
2
22
95(2010)
183 ASTM D991 - 89(2014) -
Replaces: ASTM D991-
89(2010)
Standard Test Method for Rubber Property--
Volume Resistivity Of Electrically Conductive
and Antistatic Products.
5
184 ASTM C1606 - 10(2014) -
Replaces: ASTM C1606-10
Standard Test Method for Sampling Protocol for
TCLP Testing of Container Glassware.
3
185 ASTM F1110 - 09(2014) -
Replaces: ASTM F1110-09
Standard Test Method for Sandwich Corrosion
Test
4
186 ASTM D2202 - 00(2014) -
Replaces: ASTM D2202-
00(2010)
Standard Test Method for Slump of Sealants. 4
187 ASTM C1069 - 09(2014) -
Replaces: ASTM C1069-09
Standard Test Method for Specific Surface Area
of Alumina or Quartz by Nitrogen Adsorption.
2
188 ASTM C1781 / C1781M -
14a - Replaces: ASTM
C1781/C1781M-14
Standard Test Method for Surface Infiltration
Rate of Permeable Unit Pavement Systems.
6
189 ASTM C371 - 09(2014) -
Replaces: ASTM C371-09
Standard Test Method for Wire-Cloth Sieve
Analysis of Non plastic Ceramic Powders.
3
190 ASTM C1605 - 04(2014) -
Replaces: ASTM C1605-
04(2009)
Standard Test Methods for Chemical Analysis of
Ceramic Whiteware Materials Using
Wavelength Dispersive X-Ray Fluorescence
Spectrometry.
5
191 ASTM C110 – 14 -
Replaces: ASTM C110-11
Standard Test Methods for Physical Testing of
Quicklime, Hydrated Lime, and Limestone
24
TIÊU CHUẨN JIS
192 JIS S 2010:2013 -
Replaces: JIS S 2010:2009
Aluminium cookwares. 43
193 JIS B 7728:2013 -
Replaces: JIS B 7728:2002
Calibration of force-proving instruments used
for the verification of uniaxial testing machines.
31
23
194 JIS C 2552:2014 -
Replaces: JIS C 2552:2000
Cold-rolled non-oriented electrical steel strip and
sheet delivered in the fully-processed state.
27
195 JIS K 0114:2012 General rules for gas chromatography. 46
196 JIS B 8839:2014 Graphic sysbols for gondola control. 6
197 JIS G 3474:2014 -
Replaces: JIS G 3474:2011
High tensile strength steel tubes for steel tower. 12
198 JIS Z 8808:2013 Methods of measuring dust concentration in flue
gas.
48
199 JIS Z 3121:2013 -
Replaces: JIS Z 3121:1993
Methods of tensile test for butt welded joints. 15
200 JIS C 8152-1:2014/ADM1
- Replaces: JIS C
8152:2007
Photometry of white light emitting diode for
general lighting - Part 1: LED packages
(Amendment 1).
1
201 JIS C 8152-2:2014/ADM1 Photometry of white light emitting diode for
general lighting - Part 2: LED modules and LED
light engines(Amendment 1).
2
202 JIS K 55162014/ADM1 -
Replaces: JIS K 5516-2002
Ready mixed paints (synthetic resin type). 2
203 JIS Z 3221:2013 -
Replaces: JIS Z 3221:2008
Stainless steel covered electrodes. 26
204 JIS Z 3321:2013 -
Replaces: JIS Z 3321:2010
Stainless steel rods, wires and strip electrodes
for welding
14
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
24
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.