Embed Size (px)
Citation preview
new Thermoplastic elastomers gradeline,
TPV’s, TPC-ET’s & TPU
Dean A. Nolte,
dba Plastic Pelletz
Commercial Resins Marketing Manager
Ph 330-604-4147 Fx 413-235-1125
www.plasticpelletz.com
• consider our TPC-ET grades if you use Hytrel, Arnitel, Riteflex, HeraflexA or Icorene, etal.• oil-less TPC grades useful for welding, gluing & high toughness• consider our TPV grades if you use Santoprene, Sarlink or Qprene, etal.• US operations • technical expertise• leveraging best cost strategies of niche materials sourcing• lab samples provided no-charge
Generic prime TPV: $1.65-TLNiche U.S. producer of black prime TPV
65 Shore A, can do custom durometers
Truckload min. & make to order
Offgraded prime TPV: $1.05-TLExclusive source of “near-prime” TPV
80 Shore A, limited volume, nat/black
TPV PIR repro: 98¢Exclusive source of PIR TPV
80 Shore A, limited volume, nat/black
Generic prime TPC-ET: $1.85-TLExclusive source of “near-prime”,
natural & oil-less copolyester TPE’s
43, 55, & 63 Shore D durometers
Truckload minimum orders
TPC-ET PIR repro: $3.15-1500#Niche U.S. reprocessor of prime equivalent,
natural & oil-less copolyester TPE
40 Shore D, limited volume, nat/black
Selling by gaylord only, LTL
Offgraded prime TPU: $2.55-1500#Exclusive source of “near-prime” TPU
70 Shore A, limited volume, natural
Selling by gaylord only, LTL
&
√ $
our new generic Black Concentrates
• BCC-2011 50% carbon black
50% PE carrier For use in blowmolding, sheet & profile
extrusion, injection molding, compounding & reprocessing
• BCC-2020 High tint strength
50% carbon black
50% PE carrier For use as per BCC-2011, plus in film
applications!
• BCC-2025 Economy grade
40% carbon black
PE/PP carrier blend For general use in injection molding,
compounding & reprocessing
• BCC-2030 High tint strength
50% carbon black
55-60 nm carbon
50% EVA carrier
Dean A. Nolte,
dba Plastic Pelletz
Commercial Resins Marketing Manager
Ph 330-604-4147 Fx 413-235-1125
www.plasticpelletz.com
&
68¢/Lb
71¢/Lb
62¢/Lb
85¢/Lb
LDPE, LLDPE & PE film, coating, & sheeting resins
advantageous pricing strategies
Dean A. Nolte,
dba Plastic Pelletz ℗
Account Manager – CAL Thermoplastics ©
Ph 330-604-4147 Fx 413-235-1125
www.plasticpelletz.com
• Plastic Pelletz is the eastern US sales agency for CAL Thermoplastics, resins brokerage firm for 60 years• virgin – proprietary prime, select near prime, best fit offgrade, wide-spec & “blending-in” resin mixes for various cost solutions• reprocessed PE’s also available for thick sheeting & utility purposes• we also source a lower cost calcium concentrate whitener
Lower cost virgin certified resins: ©
Our own Thermolene gradeline!
LDPE & LLDPE barefoot grades, 6 haze typ.
2.0, 4.5, 8 & 15 melt flows
FDA, autoclave & coating grades
Prime certified resins at offgrade pricing
Brokering railcars of resins: ©
LDPE,LLDPE,EVA,HDPE as available
Brokering of prime/certified cars
Brokering of offgrade/wide-spec cars
Best-fit pricing for targeted pre-selection
of near-prime cars
Offgrade “blending-in” LD/HD: ©
All natural preblended LD/HD transitions
Used 50-80% + blend-in with prime virgin
for cost reductions
MI/density homogeneous mix each lot
Reprocessed grades: ℗
LD 1-2MI clean PIR from tarp sheeting
black , orange, blue, off-white
Utility LD/PP mix 1-2MI clean PIR
consistent light ‘army’ green
lowest cost repro!
White concentrate: ℗LLDPE based 80% calcium carbonate
Imported grade for cost reduction
&
√ $
HDPE, HMW, LD & PP sheet, profile, blow-molding
resins, for cost reductions
Dean A. Nolte,
dba Plastic Pelletz ℗
Account Manager – CAL Thermoplastics ©
Ph 330-604-4147 Fx 413-235-1125
www.plasticpelletz.com
• Plastic Pelletz is now the east US sales agency for CAL Thermoplastics, resins brokerage firm for 60 years• virgin – prime, offgrade, wide-spec, blending-in resins for various cost solutions• reprocessed and regrind PE’s also available• a new source for lower cost calcium concentrate whitener
Lower cost virgin certified LDPE: ©
Our own grade Thermolene !
LDPE 2 MI 920 barefoot FDA , 6 haze
Prime certified resin at offgrade pricing
Spot railcars of resins: ©
HDPE, HMW, LDPE, EVA, PP as available
Offgrade, wide-spec, generic-prime cars
Best price offers are brokered for you !
Offgrade “blending-in” LD/HD: ©
All natural preblended LD/HD transitions
Used 50-80% + blend-in with prime virgin
for cost reductions
MI/density homogeneous mix each lot
Repro & regrind grades: ℗
LD 1-2MI clean PIR from tarp sheeting
black , orange, blue, off-white
Utility LD/PP mix 1-2MI 1izod clean PIR
consistent light green
lowest cost repro!
White concentrate: ℗LLDPE based 80% calcium carbonate
Imported grade for cost reduction
&
√ $
Announcing,reprocessed nylon
resins , starting at
65 cents/Lb*
Properties:
Typical 15 – 18 melt index
7000+ tensile at yield
0.1% or less moisture
212 deg C melt point
0 – 5% ash
0% and 1% PP content grades
Lowest cost 10-12% PP content
utility grade *
Mixed color; grayish black pellets
Source dependability:
100% fiber sourcing
Fiber recycling is in-house with new melt screening & pelletizing processes
Fiber recycling in operation for 3 generations now
Repelletizing process started 2011 to expand processability
Dean Noltedba Plastic Pelletz
Ph 330-604-4147
Fx 413-235-1125
www.plasticpelletz.com
• Are you looking for bottom line cost advantages that last?
• We have recycled, fully reprocessed nylon 6, 6.6, and 6/6.6 blend
• We can help! With significantly lower cost, and eco-friendly resins
• These are unfilled, non-engineered, straight nylon repro resins
• PCR recycled, cleaned, melt screened, devolatized, repelletized, fines sifted nylon resins
• These nylons could be a cost effective strategy for your vented processing machinery
better cost virgin
resins & repro
resins available:
virgin natural resins: ©
- Prime copolymer or homopolymer prime & certified branded railcars
- Offgrade, wide-spec, generic-prime non-certified railcars to your spec!
- Best price offers are brokered for your target pricing!
Reprocessed grades: ℗
-Mixed, to go black, homopolymer
- 15-20 MI, 92 density
-Black copolymer
- 35 MI, 90 density
- 2.0 Nizod, 3200 tensile
-Black 20% talc reinforced copo
- 20 MI, 1.07 density
- 2.0 Nizod, 2300 tensile
-Black glass reinforced copo
- 20%, 30%, 40% repro grades
- 10 & 30 MI
Dean Noltedba Plastic Pelletz ℗
Account Manager – CAL Thermoplastics ©
Ph 330-604-4147
Fx 413-235-1125
www.plasticpelletz.com
• Plastic Pelletz, the eastern US sales agency for CAL Thermoplastics, a near 60 year resins brokerage firm
• We can provide targeted pricing to access supply of virgin PP resins, certified and off-graded railcars to fit within your tolerances
• Providing a cost effective sourcing strategy, as per availability
• Plastic Pelletz also represents dedicated and integrated U.S. recycling & reprocessing, unaffected by adhoc spot buying
• We have standard grades of clean, devolatized, pelletized PP for your black colored products; for a cost advantage and to support green or eco-friendly requirements
• PP copolymer repro grades are ISO certified
• PP homopolymer PCR grade, with new enhanced systems < 0.01% moisture – our best cost grade!
√ $
Announcing,HMW-HDPE
repro resin
available!
Options:
-mixed or black pellets
-blow molding
-profile extrusion
-sheet extrusion for thermoforming
-dunnage trays, IBC’s, pallets
Advantages:
-supplier expertise built on a fractional melt HMW-HDPE focus
-material is devolatized and melt filtered
-superior cleanliness vs. regrind only
Plastic PelletzUnit of DJN Enterprises, LLC
Ph 330-604-4147
Fx 413-235-1125
www.plasticpelletz.com
• Are you considering reprocessed HMW-HDPE in your operation for a cost advantage? or…
• Do you need to improve the properties of your HDPE repro products? or…
• Are you looking to support green or eco-friendly product marketing, or requirements for sustainability?
• We can help! Supplier is an HMW-HDPE dedicated U.S. reprocessor.
• Our standard ‘dunnage’ grade:– 9 – 13 HLMI– 0.95 density– 60 mesh filtration
• Pricing = ¢/Lb CPU, or freight PPD&ADD
