The Truly Interactive Whiteboard Slinger Elementary School 1 Setting up the SMART Board

1The Truly Interactive Whiteboard

Slinger Elementary School

Setting up the SMART Board



Shut down and turn off your computer before proceeding!



Set the SMART board approximately 6 feet from projector

6 fe

et



Set the pens and eraser in the appropriate trays



Locate the SMART board connector



Plug the funky-looking end into the serial port on the computer

Look for this symbol



Unplug the keyboard connector from the back of the computer and plug in the adapter in its place



Plug the keyboard connector into the adapter



Connect the other end of the SMART board connector into the SMART board



Setting up the Projector



Locate the projector connector and power cord



Unplug the monitor from the back of the computer. Plug in the projector connector in its place.



Plug the connector from the back of the computer into the RGB 1 slot..

Plug the connector

from the monitor into the

RGB 2 slot



Plug the power cord in to the projector, then plug the cord into a power strip.



Turn on the main power switch at the back of the projector, then press the power button on the top



Turn on and log in to your computer



Orient the SMART board

This process gets the

SMART board ready to use with your computer



Adjust the distance between the SMART board and the projector so that the computer screen fills the SMART board



At your computer, from the SMART board software menu, select Orient



At the SMART board, follow the directions on the screen to orient (match it up) with the computer

Documents

The Truly Interactive Whiteboard Slinger Elementary School 1 Setting up the SMART Board