The RINOL Resin Coating Systems - ncg.solutions 8 Epoxy Systems_EN.pdf · The RINOL Resin Coating Systems 8x Custom-Made Solutions. The 8 RINOL Systems – ideal ... dust-binding

System brochure

RINOLSYSTEMS

No. 1 in industrial flooring

The RINOL Resin Coating Systems8 x Custom-Made Solutions

The 8 RINOL Systems – ideal solutions for all uses

mechanical stress

feat

ures

low

med

ium

hig

h

very

hig

h

dust-bindingsealer coatingthickness ca.0,5–0,8 mm

non-abrasiveresin coatingthickness ca.1–2 mm

superflatresin coatingthickness ca. 3 mm

non-skidresin coatingthickness ca. 3 – 4 mm

conductiveresin coatingthickness ca. 4 mm

decorative optionsresin coatingthickness ca. 4 mm

crack-bridgingresin coatingthickness ca. 5 mm

hygienicresin based mortar screedthickness ca. 8–10 mm

Very high mechanical load-bearing capacity and even-ness characteristics, long life and high resistance to chemicals, but with only minimum maintenance requirements – these are just some of the require-ments today’s industrial floors are expected to meet.These demanding requirements are met and excee-ded by RINOL synthetic resin-based coating systems. With over 40 years of experience in the development, production and application of synthetic resin coating systems, the RCR group is a market leader in the area of industrial floors and coatings.

Our synthetic resin coating systems will handle the conditions in any situation, from the installation of new floor surfaces through to modifications of existing

floors to meet new operating requirements or recon-struction projects, and to meet higher standards in terms of hygiene and operating safety.

RINOL systems are installed over existing structures, forming a hermetically sealed surface. This prevents contamination and penetration of the substructure.The connection between floor and wall is in the form of a hollowed-out groove or a liquid-tight basin, making the corners and edges much easier to clean and minimising maintenance costs.

A range of international testing reports are available for complete constructions based on our products, and we will be happy to supply these on request.

RINOL systems are:

• mechanically robust• resistant to chemicals• joint-free• poreless• liquid-tight• non-skid• available in a wide

range of colour designs

• easy to clean• easy to repair

Overview iRINOLSYSTEMS

RINOLSEALING

RINOLSTANDARD

RINOLALLROUNDER

RINOLSAFETY

RINOLCONDUCTIVE

RINOLEXQUISIT

RINOLHEAVYDUTY

RINOLSOLID

RINOL1

RINOL2

RINOL3

RINOL4

RINOL5

RINOL6

RINOL7

RINOL8

Systems 1RINOLSEALING

RINOLSEALING

Substrate

Primer

Seal coatsealer RINOL EP-S600

primer RINOL EP-P202

underlay

System description

Sealing

Thickness of system ca. 0.5 -0.8 mm

For low physical stresses

Propertiessurface protectionsurface hardeninganti-skiddust proofingincreased abrasion resistanceseamlesssolvent freeavailable in transparent and various colours

Application areasplain industrial surfacesgarage and car park floorsstoragepedestrian areaswarehousestechnical areas

Generallight duties

industrial surfaces subject to protection requirements

Physical key data

Adhesive strength3,7 N/mm2 DIN ISO 4624

Abrasion resistance see Taber 74 mg/1000 cycles ASTM D 1044 DIN 53754

Shore D hardness72 DIN 53505

Colour resistance/Light-fastness6 scale 1-8, best=8 DIN EN ISO 877

Extended performance range with surface protection

Systems 2RINOLSTANDARD

RINOLSTANDARD

Substrate

Primer

Top coattop coat RINOL EP-C520


underlay

Tried and tested a thousand times: reliable and long-lasting

System description

Coating

Thickness of system approx. 1–2 mm

For low to moderate physical stresses

Propertiesimpermeable finishhygienicsmooth or non-skidhigh abrasion resistanceself-levellingchemical resistantseamlesssolvent freeavailable in various colours

Application areasproduction sitesmanufacturing shops/outletsexhibition centresschools, offices etc.

Generalmedium duties

industrial surfaces not subject to strong chemical or physical stresses

Physical key data

Tensile strength40 N/mm2 DIN EN 196

Compressive strength65 N/mm2 DIN EN 196

Adhesive strength> 3,5 N/mm2 DIN ISO 4624

Abrasion resistance see Taber80 mg/1000 cycles ASTM D 1044 DIN 53754



Thermal expansion coefficient86*10-6/K DIN 50014

Resistance to earth> 5*109 Ω DIN EN 1081 DIN 51953

Behaviour in firehard flammable, weak smoky

Systems 3RINOLALLROUNDER

RINOLALLROUNDER

Substrate

Primer

Levelling layer


compensation layer RINOL EP-L300


underlay

The universal product with a wide range of uses

System description

Coating

Thickness of system approx. 3 mm

For moderate to severe physical stresses

Propertieshigh chemical resistancehigh abrasion resistanceimpermeable finish very smooth surface or non-skidcompensates floor irregularitiesself-levellingseamlesssolvent freeavailable in various colours

Application areaslaboratoriesproduction areasstorage areaswarehousessupermarkets

service centres with forklift and lift-platform trade traffic

Generalmedium to heavy duties

industrial areas subject to moderate chemical and physical stresses

Physical key data








Resistance to earth> 5*109 Ω DIN EN 1081 DIN 51953


water absorbency< 1% after 26 days DIN 53495

Systems 4RINOLSAFETY

RINOLSAFETY

Substrate

Primer

Levelling layerwith coloured quartz

Clear sealertransparent sealer RINOL EP-T710

top coat RINOL EP-L300 with Colorit quartz


underlay

Functional and safe

System description

Coating non-skid



Propertiesslip resistant (R11-R13)resistant to solvents and cleansing agentsimpermeable finisheasy to cleanself-levellingseamlesssolvent freeavailable in various colours

Application areascatering facilitiescommercial kitchenswet processing areasfood and beverage industrybreweriesabattoire/butchers


industrial surfaces subject to high hygienic and safety requirements

Physical key data




Abrasion resistance see Taber 80 mg/1000 cycles ASTM D 1044 DIN 53754




Systems 5RINOLCONDUCTIVE

RINOLCONDUCTIVE

Substrate

Primer

Levelling layer

Conductive layer with copper tape

Conductive top coatconductive top coat RINOL EP-C540

conductive layer RINOL EP-E480 including copper tapecompensation layer RINOL EP-L300


underlay

Suitable for clean-rooms and electrically conductive

System description

Coating anti-static



Propertieselectrically conductivesmooth finishabrasion and loading resistantself-levellingchemical resistantseamlesssolvent freeavailable in various colours

Application areasexplosion-proof industrial surfacesoperating theaterssemi-conductors assemblycomputer chips manufacturingelectronics industry

areas for automatic and air-cushion mobile equipment


industrial surfaces subject to anti-static requirements

Physical key data








Resistance to earth< 1*106 Ω DIN EN 1081 DIN 51953


Systems 6RINOLEXQUISIT

RINOLEXQUISIT

Substrate

Primer

Levelling layer

Top coat with coloured flakes

Clear top coattransparent sealer RINOL EP-T710

top coat RINOL EP-C520 with colored flakes



underlay

Design oriented without limiting the functions

System description

Coating decorative


For light to moderate physical stresses

Propertiescustom designstyle to suit corporate identity of your companyhigh abrasion resistanceself-levellingchemical resistantseamlesssolvent freeavailable in various colours

Application areasshowroomscustomer and sales areaspublic halls, museumsrestaurants, bars, theaters, office lobbies etc.

Generalmedium duties

industrial or public surfaces subject to optical requirements

Physical key data







Systems

7RINOLHEAVYDUTY

RINOLHEAVYDUTY

Substrate

Primer

Levelling layer

Glass fibrereinforcing layer

Levelling layer



fiberglass-fabric with RINOL EP-L320



underlay

The coating system for severe physical stresses

System description

Coating high-impact


For severe to extreme stresses

Propertieshigh-impact resistanthomogenous, smoothcrack tolerantself-levellingchemical resistantseamlesssolvent freeavailable in various colours

Application areasmechanical industrymilitary facilitiesrailway workshopsaeronauticspharmaceutical industry

manufacturing facilities subject to high transportation traffic

General heavy duties

industrial surfaces subject to extreme physical stresses

Physical key data




Abrasion resistance see Taber80 mg/1000 cycles ASTM D 1044 DIN 53754 Shore D hardness80 DIN 53505


Systems 8RINOLSOLID

RINOLSOLID

Substrate

Primer

Resin mortar with coloured quartz

Clear sealertransparent sealer RINOL EP-T710

resin mortar RINOL EP-T700 with colored quartzprimer RINOL EP-P202

underlay

System

The perfect combination: powerful resistance with attractive appealing

System description

Resin based mortar screed


For severe physical stresses

Propertiesattractive designstone-like and pigmented finisheshigh-impact resistantslip resistantimpermeable finishhygienicchemical resistantseamlesssolvent free

Application areasdepartment stores, supermarketsfood and beverage industryproduction and manufacturing areascatering facilitiescommercial kitchens


industrial surfaces subject to high physical and optical requirements

Physical key data



Adhesive strength> 4 N/mm2 DIN ISO 4624




Dynamic E-modul25000 N/mm2

Grinding wear6,2cm3/50cm2 DIN 52108 see Boehme

Free Shrinkage allowance0,04%

STA

ND

AR

D-C

OLO

RS

Proven safety for you!Our technical expertise is based on over 40 years of experience and ongoing development work in our laboratories. It goes without saying that to ensure your safety our products andfacilities are constantly tested by independent experts, andthat they hold all the major international test documents.

300938

oxide red

102427

ochre

601122

reseda green

101236

lemon yellow

502437

light blue

703025

medium grey

704534

peary grey

703224

beige grey

703500

light grey

101401

ivory

INTERNATIONALThe RCR group – the European market leader in industrial floors and coatings – is present in a lot of countries in Europe, and a comprehensive network of partnerships with professional and experienced dealers for all types of industrial floors. On the basis of our modular system we can offer you a full range of industrial flooring systems, from reinforced and unreinforced raft foundations and many different types of concrete floors and wearing layers through to highly complex customised synthetic resin coatings designed to meet the most demanding operating requirements.Wherever you are, you will always find a RCR group dealer in your area, providing the full service spectrum. RINOL specia-lists are available to provide you with professional advice and assistance through the entire process: from planning and con-sultancy input according to the specific requirements in your sector through to application services ensuring that the project is completed on schedule according to professional quality stan-dards, plus the full range of maintenance and repair services.

Your one-stop-shop for installation, service and maintenance of industrial floors – world-wide!

RINOLGROUP

Service

i

European ConformityOur products correspond to the norm DIN EN 13813,which allows us to use the CE trademark (Euro-pean Conformity)

DO YOu wANT MORE INFORMATIONS?

Should you want more detailed information about

our complete answers to flooring problems, please

give us a call or a fax or an e-mail.

No. 1 in industrial flooring

8SY

S_E

/RE

V.1/

3.20

07 RCR Industrial Flooring S.a.r.l.8 - 10, rue Mathias HardtL-1717 LuxemburgLuxemburg

IMPORTANT

Whilst all reasonable care is taken in compiling technical data on the company’s products, all recommendations or suggestions regarding the use of such products are made without guarantee since the condi-tions of use are beyond the control of the company. It is the customer’s responsibility to satisfy himself that each product is fit for the purpose for which he intends to use it and that the actual conditions of use are suitable.

RINOL ITALIAResearch & Technology S.r.l. Via Chiarugi 76/UI-45100 Rovigo – ROItalia

Tel.: +39/0425/411 200Fax: +39/0425/411 222

E-Mail: [email protected]

Your contact partner in the RCR Group

Documents

The RINOL Resin Coating Systems - ncg.solutions 8 Epoxy Systems_EN.pdf · The RINOL Resin Coating Systems 8x Custom-Made Solutions. The 8 RINOL Systems – ideal ... dust-binding