THE ADVANTAGE - TAILORED MILLING SOLUTIONSPETERSON

JUNIOR PETERSON ALL TERRAIN SAWMILL WINCH PRODUCTION FRAME AUTOMATED SWINGBLADE MILL DEDICATED WIDE SLABBERThe Part-Timer’s Sawmill Portable Milling in Tough Conditions Durable and Efficient for Custom Milling Commercial Production for Large Operations Chainsaw Bar in Peterson Frame for Slabbing

6" BLADE 8" OR 10" BLADE 8" OR 10" BLADE 10" BLADE 404 RIPPING OR DOUBLE/MULTI SKIP TOOTH

Motor: 13.5hp Petrol

Max. cut: 6" x 6"Double cut: 4" x 12"

Max. Log Diameter: 3'

Std. Log Length: 13'optional track extensions available

Avg. Production: 400-1600bft+ per day

“It’s the logical choice for a small woodlot owner or Farmer who wishes to

saw their own lumber from a stand of otherwise uneconomic trees or similar

resource”. - A. Coyle, NZ

Motor Options: Petrol: 22,25,27, 35hp* - Diesel: 23hp* *only available on 10" mills

Max. cut: 8" x 8" or 10" x 10"Double cut: 8" x 16" or 10" x 20"

Max. Log Diameter: 6' or 5'

Std. Log Length: 20'

Avg. Production: 850-2500bft+ per day

“I recommend swing blade sawmills to anyone who doesn’t have all the heavy equipment. Price might be the one you consider the most. But I say “Buy the

best!” - M. Shaas, USA

“The ATS far exceeds my expectations on performance lumber recovery and ease of operation. I can’t understand why anyone would buy a band mill.”

- D Jordon, NZ

Motor Options: Petrol: 22, 25,27, 35hp* - Diesel: 23hp*Electric: 15kw 3-phase**only available on 10" mills

Max. cut: 8" x 8" or 10" x 10"Double cut: 8" x 16" or 10" x 20"

Max. Log Diameter: 6' or 5'

Std. Log Length: 20'optional track extensions available

Avg. Production: 1200-3500bft+ per day

Motor Options: Petrol: 27,35hp Electric: 15kw 3-phase

Max. cut: 10" x 10"Double cut: 10" x 20"

Max. Log Diameter: 5'

Std. Log Length: 20'optional track extensions available

Avg. Production: 2500-4200bft+ per day

“With my Peterson mill I can always make profit out of the driest and knottiest wood

out there. I’m pulling a profit from logs that most others are sending to the

landfill or burning in the stove.” - N. Waterfield USA

Motor Options: Petrol: 25, 27hp Electric: 15kw 3-phase

Max. cut: 12" slab 5' wide, or 9" slab 6' 1/4" wide

Max. Log Diameter: 6' 1/4"raise tracks to get height

Std. Log Length: 20'

Avg. Production: 6 - 30 slabs per hour

“I wanted a mill that I could use by myself, that was low in maintenance,

accurate, durable, and that I didn’t have to have 2 or 3 people with me to run it.

So I bought a Peterson.” - R. Wilkins USA

www.petersonsawmills.com