Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
The ideal solution for electrical installation testing
Fluke. Keeping your worldup and running.®
Fast loop measurement.
Up to 50% fastertest time
Ruggedwithstands a drop
from 1m
LightweightWeighs lessthan 1.3kg
NEW
Extra functionality, rugged as ever
RCD Type B Compatibility
Safer, easier installation testing
The new 1650 Series builds on the rugged reputation of the earlier 1650 Series, only it’s re-designed to meet your need for more productive test tools.
Faster
• Two measurements at once and a dual display.
PEFC/PSC and loop impedance are measured and
displayed in parallel, saves you more than 50% of test
time compared to other loop testers
• Additional new high current loop mode. Faster
measurements compared to loop tests with non-trip
mode for RCD’s
• Unique zero adapter for fast, always reliable and
accurate test lead and mains cord compensation.
• Fast voltage measurement between L-N, L-PE and N-PE
using the mains cord. No need to change measurement
connections.
Safer
• Earth Volt Touchpad detects raised earth voltages >50 V,
indicating potential dangerous situations
• Supplied with the SureGrip™ test leads and clips which
gives the user a comfortable, reliable grip
Easy
• Rotary dial knob indicates clear which function is
selected, all functionalities on one spot and no complex
multi level menus
• Large display with backlight, clear symbols and with
exceptionally wide viewing angle for easy and safe
readings
• PASS/FAIL indication for RCD test results,
• Variable RCD current mode for customized settings
• Loop & Line Resistance–mΩ resolution
• Test smooth dc sensitive RCDs (Type B)
• Extended Memory
• Extended documentation mode (UK only)
Rugged & lightweight
• Withstands a drop of 1 meter
• Compact, lightweight (less than 1.3 kg) and padded
neck-strap to free your hands for all day testing
The 1650 Series testers verify the safety of electrical
installations in domestic, commercial and industrial
applications. They can ensure that fixed wiring is safe and
correctly installed to meet the requirements of IEC 60364,
HD 384 and all relevant local standards.
TP165X
Slim probe with test button. Keeps your
eyes on the panel while probing hard to
reach points. This remote probe is powered
by the tester so always operable (does not
require additonal batteries)
For more information, visit us at www.fluke.co/uk/1650
For more information, visit us at www.fluke.co.uk/1650B
Fluke 1650 Series
Localized product
Dual display with backlight Voltage and frequency
Insulation resistance
Continuity
Loop impendance No-trip mode
Loop impendance Fast, high current mode
RCD tripping time
RCD tripping current
Earth resistance (models 1653B and 1654B)
Phase sequence
Zero Adapter
For easy, always reliable and accurate compensation of test
leads and mains cords. This adapter can be used for all
different kind of mains plugs as well as test accessories like
probes, alligator clips etc.
All 1650 models are equiped with
detachable standard 4-mm leads
that can be replaced in case of
damage or loss. A durable hard
case will protect your instrument
in touch field conditions.
Complete kit
For more information, visit us at www.fluke.co/uk/1650
Invest in the right toolChoose the right tester to meet your requirements
The complete tester for advanced usersThis is the instrument that has it all, in a word: it’s complete. From all the test functions you need to in-built memory for
documenting results. This makes it the complete solution for professionals, especially contractors, everyone who would want
to have the best tool available and always understand (or know) how to use.
For more information, visit us at www.fluke.co/uk/1650
1654B
For more information, visit us at www.fluke.co/uk/1650
This is the instrument that is indeed ideal for professional users due to its
additional functionality. It is also ideal since even though it has high-end
features, it is still easy to use – even after longer periods of non-use;
because operating it is intuitive and not forgotten easily.
The ideal tester for professional trouble-shooters
1652C
Specifi cationsFeatures by Model
Measurement Function 1652C 1653B 1654B
Voltage & Frequency • • •
Wiring polarity checker • • •
Insulation Resistance • • •
Continuity & Resistance • • •
Loop & Line Resistance • • •
Loop & Line Resistance–mΩ resolution •
Prospective Earth Fault Current (PEFC/IK)Prospective Short-Circuit current (PSC/IK)
• • •
RCD switching time • • •
RCD tripping level ramp test•
ramp test•
ramp test•
RCD variable current • • •
Automatic RCD test sequence • • •
Test pulse current sensitive RCDs (Type A) • • •
Test smooth dc sensitive RCDs (Type B) •
Earth Resistance • •
Phase Sequence Indicator • • •
Other Features
Self-test • • •
Illuminated Display • • •
Memory, Interface
Memory • •
Extended Memory •
Computer Interface • •
Time and date(When used with FlukeView software)
• •
Software (optional) • •
Included Accessories
Hard case • • •
Remote control probe • • •
Zero Adapter • • •
Technical specifi cations
Data sheet with detailed specifications is available via www.fluke.eu/1650
For more information, visit us at www.fluke.co/uk/1650
Specification Characteristic
Size (cm) 10 (L) x 25 (W) x 12.5 (H)
Weight (incl. batteries)
1.3 Kg
Battery size, quantity
Type AA, 6 ea.
Sealing IP-40
Safety Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
Overvoltage CAT III / 500V; CAT IV 300V
Performance EN61557-1 to EN61557-7 Second edition and EN61557-10 second edition
Range Resolution Input Impedance Overload Protection
500 V 0.1 V 3.3 MΩ 660 V rms
Range Resolution Frequency Output Voltage
200 Ω / 2000 Ω 0.1 Ω / 1Ω 128 Hz 25 V
Icon Phase Sequence indicator is active.
Range (Autoranging) Resolution Open Circuit Voltage
20 Ω / 200 Ω / 2000 Ω 0.01 Ω / 0.1 Ω / 1 Ω >4 V
Test Voltages
1652C 1653B / 1654B
250-500-1000 V 50-100-250-500-1000 V
Current Settings[1] MultiplierMeasurement Range
RCD Type G RCD Type S
10-30-100-300-500-1000 mA – VAR x ½, x 1 310 ms 510 ms
10-30-100 mA x 5 50 ms 160 ms
Note [1] 1000 mA type AC only. 700 mA maximum type A in VAR mode, VAR mode not available for type B.
Current Range Step SizeDwell Time Measurement
AccuracyType G Type S
30 % to 110 % ofRCD rated current[1] 10 % of I∆ N
[2] 300 ms/step 500 ms/step ±5 %
Notes[1] 30 % to 150 % for Type A IΔN > 10mA 30 % to 210 % for Type A IΔN = 10mA 20 % to 210 % for Type B
Specified trip current ranges (EN 61008-1):50 % to 100 % for Type AC35 % to 140 % for Type A (>10 mA)35 % to 200 % for Type A (≤10 mA)50 % to 200 % for Type B[2] 5% for Type B
RCD Type Mode 1652C/1653B Model 1654B
AC1 G2,S3 A4, AC1, G2,S3 A, AC, B5, G, S
Notes [1] Responds to AC, [2] General, no delay, [3] Time delay, [4] Responds to pulsed signal [5] Responds to smooth DC signal
Range Resolution
10 Ω/ 0.001 Ω/ Hi Current mΩ mode 0.01 Ω / 0.1 Ω / 1 Ω
Range Resolution
1000A / 10kA(50kA) 1A / 0.1kA
ComputationProspective Earth Fault Current (PEFC) or Prospective Short Circuit Current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
General Specifi cations AC Voltage Measurement
Earth Resistance Test (RE) Model 1654B and 1653B only
Phase Sequence Indication
Continuity Testing (RLO)
Insulation Resistance Measurement (RISO)
Tripping Speed Test (ΔT)
RCD/FI-Tripping Current Measurement/Ramp Test (IΔN)
RCD Testing, RCD Types tested
Loop and Line Impedance (ZI)
Prospective Earth Fault Current, PSC Test
Test Voltage Insulation Resistance Range
Resolution Test Current
50 V 20 MΩ/50 MΩ 0.01 MΩ / 0.1 MΩ 1 mA @ 50 kΩ
100 V 20 MΩ / 100 MΩ 0.01 MΩ / 0.1 MΩ 1 mA @ 100 kΩ
250 V 20 MΩ / 200 MΩ 0.01 MΩ / 0.1 MΩ 1 mA @ 250 kΩ
500 V 20 MΩ / 200 MΩ / 500 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ 1 mA @ 500 kΩ
1000 V 20 MΩ / 200 MΩ / 1000 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ 1 mA @ 1 MΩ
For more information, visit us at www.fluke.co/uk/1650
Earth Spike Test kit for Fluke 1653B &
1654B, contents:
• Auxiliary earth probes
• Test connection leads and crocodile clips
• Purpose-made carry case
Slim probe with test button keeps your
eyes on the panel while probing hard to
reach points. This remote probe is
powered by the tester so always operable
(does not require additional batteries).
MTC1363 Mains Cord UK Plug
MTC77 Mains Cord Schuko Plug
• For easy test lead compensation
(loop and continuity)
Set includes three Flexible Socket Probes
and a Large Alligator Clip
• Test probe set to be used on motor and
three phase sockets
• Probes have flexible test points that fits
securely between 4 and 8 mm sockets
• For use with 4 mm shrouded test leads,
such as Fluke TL224
• Safe contact e.g. in CEE 16 A and CEE
32 A plugs
• CAT III 1000 V / CAT IV 600 V, 8A
ES165X Earth Spike Kit TP165X Remote Test Probe TLK290Flexible Socket Probe Set
Mains Cord
Zero adapter
DMS 0100/INST Software for Installation Tester Fluke 1653B & 1654BThe Fluke DMS (Data Management
Software) is an efficient program for
administration and reporting of
installation tests.
• Clear and logic hierarchy
• Directory structure, easy to handle
(customer, site, department, UUT, Test),
is always visible
• Measurement data transfer from test
instrument to PC
• Print of test reports
• Supporting reports for UK, Austria,
Germany, Switzerland, Netherlands
DMS 0702/PAT Software for Portable Appliance Tester Fluke 6500Supporting reports for UK, Austria, Germany,
Netherlands
DMS COMPL PROF Software for the Fluke 1654B,1653B and Fluke 6500Supporting reports for UK, Austria, Germany,
Switzerland, Netherlands
FVF-SC2 ViewForms SoftwareExpand the power of the world’s most
rugged, accurate handheld test tools with
FlukeView® Forms Documenting
Software. To address the increasing
demands for reporting and documentation,
Fluke presents FlukeView Forms docu-
menting software. FlukeView Forms
increases the power of your Fluke tool by
enabling you to document, store and
analyze individual readings or series of
measurements, then convert them into
professional-looking documents.
The right accessories for your Fluke tools
Fluke: the complete range in electrical testing
Included Accessories6 AA Cell batteries
C1600 Hard carrying case
Zero Adapter
Mains test cord
TL165X STD Standard Test Lead Set
Padded carrying strap
Quick reference guide
TP165X Remote control probe and lead
Users manual on CD-ROM
Ordering Information
Fluke 1652C Multifunction Installation Tester
Fluke 1653B Multifunction Installation Tester
Fluke 1654B Multifunction Installation Tester Fluke (UK) Ltd.52 Hurricane WayNorwichNorfolkNR6 6JBUnited Kingdom
Tel.: (020) 7942 0700Fax: (020) 7942 0701E-mail: [email protected]
©2010 Fluke Corporation. Specifi cations subject to change without notice. 9/2010 11642-eng Rev 01
Fluke. Keeping your world up and running.®
Fluke 360 AC Leakage Clamp Meter Fluke 1507 Insulation Tester
Ideal for non-invasive checks of insulation conditions
• Advanced shielding to ensure accurate results when measuring
near other conductors
• Broad range of measurement form 1μA up to 60A
• Digital display with analogue bargraph
• Handy “Display-Hold” button for capturing leakage current
readings in hard-to-reach places
The cost effective solution to insulation testing
• Insulation tester with test voltages 50 V, 100 V, 250 V, 500 V
and 1000 V
• Continuity function with 200 mA source
• Remote control test probe
• Compare pass/fail function for fast repetitive tests
• AC/DC voltage measurement up to 600 V