20
The Healthcare and Educational Facilities Design and Construction Event for New England FOURTH ANNUAL SAVE THE DATE April 4+5, 2017 Seaport World Trade Center Boston www.mededboston.com Who Should Attend: Owners | Architects | Engineers | Healthcare Designers Educational Designers | Facility Managers | Exterior Enclosure Specialists Commissioning Professionals | Specifiers | Contractors Project Types Discussed: Ambulatory Centers | Colleges and Universities | Health Clinics Hospitals | K-12 Buildings | Laboratories | Life Sciences Facilities Medical Office Buildings | Nursing Homes | Senior Housing Outpatient Surgical Units | Pharmaceutical Facilities Architects Earn your continuing education and AIA/CES Learning Units (LUs) in two days Educational Partners:

The Healthcare and Educational Facilities Design …mededboston.com/images/MedEd-Attendee-Planner-WEB.pdf · The Healthcare and Educational Facilities Design and Construction

  • Upload
    hanhan

  • View
    218

  • Download
    0

Embed Size (px)

Citation preview

The Healthcare and Educational Facilities Design and Construction Event for New England

FOURTH ANNUAL

SAVE THE DATE April 4+5, 2017

Seaport World Trade Center Boston

www.mededboston.com

Who Should Attend: Owners | Architects | Engineers | Healthcare Designers Educational Designers | Facility Managers | Exterior Enclosure Specialists Commissioning Professionals | Specifiers | Contractors

Project Types Discussed: Ambulatory Centers | Colleges and Universities | Health Clinics Hospitals | K-12 Buildings | Laboratories | Life Sciences Facilities Medical Office Buildings | Nursing Homes | Senior Housing Outpatient Surgical Units | Pharmaceutical Facilities

Architects Earn your continuing education and AIA/CES Learning Units (LUs) in two days

Educational Partners:

Contents

Educational Partners

Media Partners

Conference At A Glance ............... 3-4Sessions .....................................5-13Speakers ..................................14-15General Information ................ 16-17Registration Form .........................18

1 MED |ED FACILITIES

The USGBC Massachusetts Chapter is a membership-based community advocating for green buildings at the state

and local level. The USGBC MA Chapter provides green building education, networking, advocacy, and leadership opportunities for the sustainable building practitioner community and beyond. Our events and programming are supported and enhanced by the volunteer efforts of our community members.

Over 600 people participate as members & active volunteers, and over 15,000 people subscribe to our various communication lists. Through our many committees, we address all aspects of the greening of the real estate sector: planning, design & engineering, construction, management & operation, and beyond. We help all practitioners by promoting market transformation.

The Facility Guidelines Institute is the publisher of the Guidelines for Design and Construction documents, the most widely recognized guidance for planning, designing, and constructing hospitals,

outpatient facilities, and residential health, care, and support facilities. FGI partners with numerous organizations to develop the consensus-based Guidelines and other practical, evidence-informed publications.

The Institute for Human Centered Design, formerly know as Adaptive Environments (AE), was founded in 1978 by Elaine Ostroff and

Cora Beth Able, an outgrowth of the Arts and Human Services Project, a multi-disciplinary graduate program supported by the Massachusetts Department of Mental Health at the Massachusetts College of Art in Boston. The graduate program emphasized the leadership role of artists and designers in

creating community-based programs for people with disabilities. The design emphasis coincided with the deinstitutionalization movement of the late 1970s in which people with disabilities, many of them children, were moving from institutions into communities. Schools, libraries, entertainment and recreation places, public space, even homes were not designed to accommodate this new level of community diversity. The Institute for Human Centered Design began with a focus on helping families and communities solve practical problems of the design of places. It engaged designers in the work and taught design students the power of design to shape social equity.

CSI Boston is one of the 140+ chapters that make up the Construction Specifications Institute.

CSI is a national association dedicated to improving the documentation, management and communication of building information as used by the construction community.

CSI accomplishes its mission through the development of construction standards and formats such as MasterFormat and UniFormat; the promulgation of those formats through master guide specifications and building information management (BIM) software; training and certification programs, including the Construction Documents Technology (CDT) and Certified Construction Contract Administrator (CCCA) exams; publication of Construction Specifier magazine; and an ever-expanding membership of decision-makers who identify and specify building product solutions. CSI members include a cross-section of specifiers, architects, contractors, suppliers and other construction project professionals who are touched by construction documentation.

Conference Advisory Board

MED |ED FACILITIES 2

MED|Ed Facilities Boston is the premier conference for healthcare and educational facilities in New England, featuring a dynamic education program. The Advisory Board members are leading professionals from the architecture, design, engineering and construction community. They provide guidance and industry insight, working to ensure that the quality of content provided to attendees is meaningful, relevant and timely. Their dedication is critical to the success of the conference.

Gerry-Lynn Darcy VP Real EstateLupoli Companies

Donna S. Denio Co-chairBSA/SCUP College and University Roundtable

Gerry Gutierrez AIA, CDTDirector of Technical Resource GroupSasaki Associates

Johanna C. Jobin Director, Global EHS & SustainabilityBiogen

Mark Kalin, FAIA, FCSI, LEED PresidentKalin Associates

Robert Leber PE, LEED APExecutive Vice President Cosentini Associates, Inc.

Cynie Linton Associate AIA, CSI, LEED AP BECxP, CxA+BEAssociate | Senior Specifications WriterSymmes, Maini, & McKee Associates

Jeffrey F. Lowinski Vice-President, Technical ServicesWindow & Door Manufacturing Association

John Martin AIA PrincipalElkus | Manfredi Architects

Kristine Renner AIA, LEED AP Project ManagerHarvard University

Michelle Roberts, CSI PrincipalChatham Hill Design

Sherri Rullen AIA, LEED AP Sr. Director of Planning, Design & ConstructionDana-Farber Cancer Institute

Chris Schaffner PE, LEED FellowPrincipalThe Green Engineer, Inc

Anand Seth PE, CEM, CPE Independent Consultant

Jessica R. Stebbins, IIDA, LEED AP Healthcare PrincipalHDR

Richard Vendola PrincipalTMS, Ltd.

3 MED |ED FACILITIES

Conference at a GlanceTuesday, April 4, 2017

Acou

stic

s

Build

ing

Encl

osur

es

Build

ing

Mat

eria

ls

Case

Stu

dies

Code

s + R

egul

atio

ns

Educ

atio

n

Ener

gy P

erfo

rman

ce

Mar

ketin

g +

Prac

tice

Med

ical

Tra

ck

Plan

ning

+ D

esig

n Tr

ack

Sust

aina

bilit

y +

Resi

lienc

y

Tech

nolo

gy

Wel

l-bei

ng +

Des

ign

8:00 - 9:30 AMT10 LU/HSW The Vertical College at Union Point 6T11 LU/HSW Noise & Acoustics: What’s New in the 2018 FGI Guidelines 6

T12 LU Digitally Manufactured Concrete Formwork: A Case Study at The Cleveland Museum of Art 6

T13 LU/HSW Clinical Technology and Patient Safety meets design 6T14 LU/HSW Energy Savings And Regulatory Compliance: New Options 6T16 LU/HSW Day One Operational Readiness 6T17 LU/HSW Stretch Code Updates and How to Use Them as an Advantage 6T18 LU/HSW Living Building Challenge on your Campus 6

10:00 - 11:30 AMT20 LU/HSW Sterile Processing Department Design and HVAC Considerations 6T21 LU/HSW VDC and interdisciplinary collaboration achieve sustainability goals 6

T22 LU|HSW Lab Planning Best Practices for Optimizing Flexibility and Collaboration 6

T24 LU/HSW In a v4 Materials Quandry? Solutions Through Collaboration 6

T25 LU|HSW Why Specifications Matter 6T26 LU/HSW New Methods for Integrated Planning and Design 6T27 LU/HSW FitWel 6

T28 LU/HSW Creating the Academic Acute Care Tower for the Future: The Penn Medicine Patient Pavilion 6

11:15 - 12:30 PMX10 LU Advanced Coatings Technology & the Sustainability Movement 6

2:00 - 3:30 PM

T30 LU/HSW The 2018 Guidelines: Major Revisions to Procedure, Operating, and Imaging Rooms 6

T31 LU/HSW Systems Basics - Understanding the Systems and Design 6

T32 LU/HSW Getting to Zero: User Engagement in Achieving Net Zero Energy 6

T33 LU/HSW Designing Modern Wood Schools: A Guide for Architects and Structural Engineers 6

T34 LU/HSW Crafting Accessible Landscapes for Ed and MED Institutions 6

T35 LU/HSW Under Construction: Local LEED v4 Case Studies 6

T36 LU/HSW Cognitive Architecture: Neuroscience Informing Design 6

T37 LU Virtual Reality & Mixed Reality in Healthcare and Educational Construction and Facilities Visualization 6

T38 LU Pros and Cons of Chapter 149 vs 149A Procurement for Owners & Architects 6

4:00 - 5:30 PMT40 LU/HSW For Health: How buildings impact the way we think and feel 6T41 LU/HSW Designing a High-Tech Building in a Historic Campus Context 6

T42 LU The Architecture of Tilt-Up 6

T44 LU/HSW Right Sizing ED Expansion using Lean Process Design and Simulation 6

T46 LU The Modernization & Revival of Duke University’s Historic West Union 6

T47 LU/HSW A Sneak Preview at the 2018 Guidelines – Are you Ready for Change? 6

T48 LU Virtual Reality for BIM 6

= = = =

Conference at a GlanceWednesday, April 5, 2017

Acou

stic

s

Build

ing

Encl

osur

es

Build

ing

Mat

eria

ls

Case

Stu

dies

Code

s + R

egul

atio

ns

Educ

atio

n

Ener

gy P

erfo

rman

ce

Mar

ketin

g +

Prac

tice

Med

ical

Tra

ck

Plan

ning

+ D

esig

n Tr

ack

Sust

aina

bilit

y +

Resi

lienc

y

Tech

nolo

gy

Wel

l-bei

ng +

Des

ign

8:00 - 9:30 AMW10 LU/HSW Improving Safety and Security in Health Care Facilities 6

W11 LU/HSW Applicability of Health Communication Theories to Environment of Care Design 6

W12 LU/HSW Building Enclosure Compliance Testing - The How and Why 6W13 LU/HSW The Case for Modular Design in Small Healthcare Renovation Projects 6

W14 LU/HSW Unlocking Hidden Energy Savings for Schools and Hospitals through Energy Storage 6

W15 LU/HSW What Happens the Day After Open House 6W16 LU/HSW Designing for Wellness 6W17 LU/HSW Tackling the challenge: the new MA Energy Code 6

W18 LU/HSW The ADA Standards for Accessible Design: What Medical Centers Need to Know 6

10:00 - 11:30 AMW20 LU/HSW Patient Privacy & Tranquility: Creating Optimal Healing Environments 6

W21 LU/HSW How Humans Internalize and Express Architecture 6

W22 LU|HSW Rising to the Challenge on Campus: An Owner’s Perspective 6

W23 LU/HSW "Zero Energy" and "Cost Competitive" - Can These Go Together 6

W24 LU|HSW Human-Centric Lighting - What Does it Mean and How do We Provide it in Practice? 6

W25 LU/HSW The Impact of the MA Stretch Energy Code 6W26 LU/HSW The Integration of a High Performance Science Building 6W27 LU/HSW New FGI Guidelines Document Dedicated to Outpatient Facilities 6W28 LU/HSW From Research to Specifications to Healthier Environments 6

12:45 PM - 2:00 PMZ31 LU Seamless Floors and Wall Systems 6

2:00 - 3:30 PMW30 LU/HSW Learning Environments for Children with Developmental Disabilities 6W31 LU/HSW A Zero Net Energy Teaching Laboratory - The First 6 Months 6

W32 LU/HSW Resilient Design for Healthcare Facilities: Weathering the Storm & Beyond 6

W33 LU|HSW Welcoming Campuses, Wayfinding that Works for Everyone 6

W34 LU Important Considerations when Entering into Government Contractor Teaming Agreements. 6

W35 LU Applying Virtual Reality to Your Client Meeting 6

W36 LU/HSW 2012 Edition of NFPA 99 - What You Should Know 6

W37 LU/HSW Common Code Mistakes 6

W38 LU/HSW Building a Healthy Campus: The WELL Building Standard 6

4:00 - 5:30 PMW40 LU/HSW Maximizing Energy Efficiency & Generation with the Integration

of Spray Polyurethane Foam Roofing & Photovoltaics Systems on Educational Facilities

6

W41 LU/HSW Designing for Net Positive Water and Energy 6

W43 LU|HSW Comprehensive Analysis of Accessibility Compliance as a Tool for Diversity and Inclusion in Higher Education: A Case Study 6

W44 LU/HSW The Role of the Roof in Resilient Building Design 6

W45 LU/HSW Building IoT: A Non-Invasive Energy Upgrade for Healthcare Facilities 6

W47 LU Overcoming the Performance Challenges of Glass Facades 6

MED |ED FACILITIES 4

8:00 - 9:30 AMT10 LU|HSW | Planning + Design TrackThe Vertical College at Union PointHear how colleges and universities are teaming up to solve the critical shortage of Nurses and provide af-fordable, high quality education in New England. The Owner of Union Point, a 1500 acre mixed use communi-ty arising just 12 miles south of Boston, is constructing a 240,000 sf collaborative educational facility shared by up to 12 institutions with on-site MBTA service— sur-rounded by first-class amenities including PARKING. The Vertical College provides digitally assigned class-rooms, lecture and lab spaces driving up space utiliza-tion while dramatically reducing real estate and infra-structure cost. Learn the strategies behind increased ROI and bold use of shared services which drive be-yond the obvious physical space to innovations such as shared Bursar, student assistance and more.

John Tocci CEOTocci Building Corporation

Kenneth Rubinstein Director PretiFlaherty

Kyle Corkum Managing PartnerLStar Land

Gerard Kavanaugh Senior Assistant Chancellor UMASS

Ted Landsmark President Emeritus of Boston Architectural College

T11 LU/HSW | Acoustics TrackNoise & Acoustics: What’s New in the 2018 FGI GuidelinesThe 2018 FGI Guidelines for Design and Construction documents are scheduled for publication in November 2017. The new edition includes substantial improve-ments to sections addressing noise, acoustics, and vi-bration. Acoustics guidelines and recommendations in the Guidelines documents have evolved over the past 12 years in response to health care industry needs, in-cluding privacy requirements (HIPAA), patient comfort (CMS’s Hospital Consumer Assessment of Healthcare Providers and Systems surveys), and rising noise levels across the health care industry (e.g., alarm fatigue and the Joint Commission’s National Patient Safety Goals). The 2018 Guidelines documents will provide compre-hensive and correlated noise and acoustics criteria adapted specifically for residential care, outpatient facilities, and hospitals.

David Sykes MA Chair FGI Acoustics Working Group and Acoustics Proposal Review Committee

T12 LU | Building Materials TrackDigitally Manufactured Concrete Formwork: A Case Study at The Cleveland Museum of ArtThrough the lens of a specific project, the presentation will explore the possibilities of digital fabrication of concrete formwork, the associated design and docu-mentation process, and the lessons learned from the construction process.Beginning with an introduction of concepts and capabilities, the case study will focus on the applications of custom concrete formwork fab-ricated using CNC technology. The course will cover the creation of design processes and efficient docu-mentation procedures to facilitate the integration of digitally manufactured formwork into your projects. You will also learn to write effective specifications, about typical construction administration issues that may arise, and how to manage those issues in the field.The presentation will use a case study to illustrate the complete process. At the Cleveland Museum of Art, the Maintenance Building forms a visual buffer from the sculpture garden and restaurant and the service loading docks. Undulating concrete forms were used to strengthen the building’s relationship with the broader landscape context. Sasaki Associates engaged CW Keller +Associates early in the design process to maxi-mize the potential of the design within the budgetary constraints. Sasaki and CWKA worked collaboratively throughout the design process, and CWKA was ulti-mately awarded the contract to fabricate the concrete formwork for the building.

Christopher Hardy Associate Sasaki Associates

T13 LU/HSW | Medical TrackClinical Technology and Patient Safety Meets DesignPatient safety must be on the forefront of every health-care design, yet it can take a back seat to patient ex-perience. As we continue to experience preventable deaths and errors in the healthcare system, it is im-portant to understand how design elements can re-duce errors. The development of stop gaps and forcing function design characteristics can prevent care givers from doing the wrong thing. The hallmark of patient safety is the creation of interactive, transparent sys-tems that communicate clearly and reliably. Develop-ing a reliable method and tool to reduce risk and harm in the predesign phase is the first step. This session will demonstrate lessons learned around developing a safety risk assessment process and tool in designing the New Patient Pavilion at Penn Medicine. In addition, the Burwood group will review how new technology can be applied to streamline flow, improve operations and enhance communication.

Kathryn Gallagher Clinical Liaison Real-estate Design & Construction Penn MedicineUniversity of Pennsylvania Health System

Kathleen Woods Senior Healthcare Consultant HDR

Brenda Reig Senior Clinical Informatics Consultant Burwood Group

T14 LU/HSW | Energy Performance TrackEnergy Savings And Regulatory Compliance: New OptionsThe air distribution systems in today’s hospitals and medical laboratories play a critical role in providing effective ventilation and meeting strict regulatory compliance. Ensuring their proper functioning is also a central source for energy savings and the reduced operational costs that follow. In the past few years, in-novations in duct sealing technology and HVAC system performance have opened new doors of opportunity for healthcare engineers looking to repair or upgrade existing duct systems, meet regulatory compliance and save on operational costs. This presentation will look at the implementation of these new technologies by several major medical facilities to safely and success-fully complete HVAC system renovation projects that were previously considered logistically and economi-cally unviable. Examples include the renovation of an existing medical facility (Arnot Ogden Medical Center), upgrades to a hospital pharmacy (Condell Medical Cen-ter), and the ventilation repair at a newly constructed medical complex (Arzanah Medical Facility). In each case, technological innovations and critical procedural strategies proved to be a game-changer for hospital administrators looking to solve persistent ventilation issues and significantly reduce energy costs.

Neal Walsh Sr. Vice President Aeroseal LLC

T16 LU/HSW | Planning + Design TrackDay One Operational ReadinessIn today’s ever evolving Healthcare marketplace, plan-ning for the start-up, commissioning and occupancy of a new capital project is a daunting challenge. The com-plexities of programming, design and construction in-volve dozens of independent entities and a multitude of regulatory authorities and their accompanying codes and requirements. The intense focus and efforts required to construct the facility often result in an in-advertent overlooking of the planning and training to ensure that the facility and its staff are operationally ready to assume the immense responsibilities to run the facility as conceived.Proper operational readiness is critical to ensuring an institutions return on invest-ment. High performing buildings involve complex en-gineering and symbiotic relationships amongst the major building systems and occupant work patterns. Often the building engineers are inadequately involved in the design process, and only minimally trained prior to assuming control of these systems. Too often, the default is to override control systems to respond to

Tuesday, April 4, 2017

Design professionals may earn American Institute of Architects (AIA)/Continuing Education System (CES) Learning Units (LUs) by attending pre-approved MED-Ed Facilities sessions and co-located sessions.

5 MED |ED FACILITIES

Sessions

MED |ED FACILITIES 6

Register on-line www.mededboston.com

complaints or perceived inefficiencies. In additions, most large capital projects involve multiple horizontal or vertical connections to existing facilities, or rely on existing plant equipment to serve the new space. Our challenge as an industry is to better account for these complexities and to look to the future and provide the tools and education necessary to develop a technically proficient workforce.

Joe Breen LEED AP Senior Vice President Skanska USA Building

Michael Benedetto Vice President - Regional Executive Skanska USA Building

David Flanagan Director of Engineering, Infrastructure and Research Facilities Planning Beth Israel Deaconess Medical Center

Steve Rizzo President Synergy Consultants, Inc.

T17 LU/HSW | Codes + Regulations TrackStretch Code Updates and How to Use Them as an AdvantageThe MA building energy code (and associated Stretch Code) are changing with the continuously updating ANSI/ASHRAE/IES Standard 90.1. These changes, as al-ways, will impact all new construction and major reno-vation projects which are pursuing code compliance, energy efficiency programs incentives, and rating sys-tem certifications. We will review the most significant changes to the energy modeling protocols as they re-late to Stretch Code, LEED, and other related programs. More specifically, we will track changes to the Appendix G: Performance Rating Method (PRM) that is commonly used in assessing building energy performance. In ad-dition to the usual, technical updates; Standard 90.1 - 2013 includes an alternate methodology (addendum bm) that paves the way for an entirely new approach to the ever-changing Baseline energy model. This meth-odology is a preview of the proposed 2016 version of the Standard that has the potential to drastically sim-plify the Baselines that all buildings are compared to. The simplification could have impacts to everything from tracking Architecture 2030 objectives to smooth-ing future energy code transitions. Adopting the op-tional energy modeling methodologies presented in addendum bm early has the potential to set firms up for early transitions to increasingly stringent energy targets and bench-marking activities.

Craig Simmons LEED AP, PE Energy Consultant VEIC

Neetu Siddarth Senior Building Performance Analyst The Green Engineer

T18 LU/HSW | Sustainability + Resiliency TrackLiving Building Challenge on your CampusThe Living Building Challenge is the built environment’s most rigorous performance standard. Participants will gain a basic understanding of the Living Building Chal-lenge - a philosophy, advocacy tool and certification program that addresses development at all scales. To be certified, projects must meet a series of ambitious performance requirements, including Net Zero Energy, Waste and Water. Participants will learn to describe the key components of the program and discuss the ratio-nale for restorative design principles.

Shawn Hesse LEED AP, RA Boston Office Leader emersion DESIGN

10:00 - 11:30 AMT20 LU/HSW | Planning + Design TrackSterile Processing Department Design and HVAC ConsiderationsToday, health care organizations are challenged to meet conflicting and sometimes unclear HVAC stan-dards and guidelines established by multiple profes-sional organizations, including ASHRAE, ASHE, AAMI, APIC, AORN, and FGI. The biggest challenge for owners and designers is to understand the purpose and scope of the various requirements. While some standards are written to be applied during design and renovation of a facility, others are intended as daily clinical practice guidelines. The lack of understanding of the differ-ent purposes of these two standard types has led to much confusion and conflict in the industry.The built environments of perioperative services are among the most sophisticated and interrelated in health care. Even experienced architects and engineers need input from point of service providers—especially periopera-tive nurses and infection preventionists—to inform the design process. The draft 2018 Guidelines provides expanded guidance for designing these critical areas to support and encourage clinical personnel to com-ply with professional practice guidelines for cleaning, decontaminating, and sterilizing surgical instruments. This presentation addresses the HVAC standards as well as the revised sterile processing room require-ments, including a change to require two rooms (de-contamination and clean) to support a one-way traffic flow from contaminated to clean.

Douglas Erickson FASHE, CHFM, HFDP, CHC CEO Facility Guidelines Institute

Paula Wright RN, BSN, CIC Project Manager, Infection Control Unit Massachusetts General Hospital

T21 LU/HSW | Planning + Design TrackVDC and interdisciplinary collaboration achieve sustainability goalsThe industry has touted BIM and VDC efforts as a ‘cure-all’ for the construction and design industry. When used correctly through preordination efforts with collaborative input from the both the design and con-struction teams your project can not only be produced more efficiently, but also perform more efficiently. This presentation will walk you through real life examples and strategies being used throughout projects in the healthcare industry.

Donal Lyons Virtual Construction Manager Structure Tone, Inc.

Julia Rogers LEED AP BD+C, CSM Sustainable Design Practice Leader Vanderweil Engineers

Jennifer Taranto LEED AP ID+C, BD+C, WELL AP Director of Sustainability Structure Tone, Inc.

T22 LU/HSW | Medical TrackLab Planning Best Practices for Optimizing Flexibility and CollaborationExplore planning approaches for creating integrated science facilities that drive efficiency and embody future flexibility with regards to cost, program and building systems. Examine three new science building projects that feature openness and transparency to promote comfort, efficiency, safety, productivity and collaboration. The presentation showcases design op-portunities and options that integrate physical space, program and user experience to attract science’s brightest minds. Speakers will present user-specific tradeoffs and strategic choices that led to radically dif-ferent design approaches. The architects will explore the design features of their new Integrated Sciences Complex that illustrate flexibility and influence col-laboration, showing how interaction areas of various scales, locations of write-up desks, group work space, shared equipment and lab support all promote con-nectivity and interaction. Discipline-driven variations will be explored to illustrate the flexibility of planning concepts. The presenters will compare metrics for net/gross, support/lab and other parameters for these ex-amples and benchmark them against industry norms, sharing details and post-occupancy lessons-learned regarding current laboratory features such as “plug-and-play” services and mobile casework.

Jefferson Poole AIA, LEED BD+C Associate Principal Goody Clancy

Arjun Mande Associate Principal Goody Clancy

T24 LU/HSW | Building Materials TrackIn a v4 Materials Quandry? Solutions Through CollaborationA diverse panel of experts in sustainable design will share their adventures in navigating specification writing and meeting the contractor’s documentation requirements for LEED v4 compliance with the Mate-rials and Resources Building Product Disclosure and Optimization credits and the Low Emitting materials credit categories.

Carrie Havey LEED BD+C Sr. Project Manager The Green Engineer

Steven Burke Sustainability Manager Symmes Maini & McKee Associates

Lisa Goodwin Robbins RA, CCS, LEED AP Associate Principal Kalin Associates, Inc.

Conor McGuire Director of Sustainability Columbia Construction

T25 LU/HSW | Codes + Regulations TrackWhy Specifications MatterWith new technology, the traditional role of specifica-tions is evolving. Come find out about the current role of specification writing in today’s practice. Hear from local professionals about best practices for specifica-tions and the rewards of specification writing as a ca-reer option.

Mark Kalin FAIA FCSI LEED Principal Kalin Associates Inc.

T26 LU/HSW | Education TrackNew Methods for Integrated Planning and DesignHow do institutions make strategic investments in space and substantial changes to pedagogy simultaneously and strategically? Learn about the unique tools and pro-cesses utilized to create a multipurpose suite of spaces for the University of the Sciences Philadelphia College of Pharmacy. Flexible, sophisticated, user-friendly tech-nology and space was designed to accommodate evolv-ing growth, academic and accreditation requirements, student expectations, and important best practices in team-based patient care management.

Thomas Simister AIA, LEED AP BD+C Architect Sasaki Associates

Jane Kleinman Director of Experiential and Health Education Sasaki Associates

Cathy Poon Associate Dean of Interprofessional Education & Chair Dept of Pharm Practice & Pharm Admin University of the Sciences in Philadelphia

T27 LU/HSW | Well-being + Design TrackFitWelHealth and wellbeing as an outcome of the built envi-ronment have become a major focus across all market sectors. Between 2015 and 2016, two standards were released to help provide guidance to designers to help usher in greater health in the built environment. The first was Delos’ WELL Building Standard, which looked and operated much like a hybrid rating system of LEEDv4 and the Living Building Challenge. At the same time, the Center for Active Design, a New York City based non-profit, was developing a simpler, more cost effec-tive option to WELL: Fitwel. Fitwel is a new standard, which will be ready for release to a general audience in early 2017, which like WELL, marries evidence based approaches for health and wellbeing with design strate-gies to help designers and building owners realize these impacts in the built environment. Come learn about this new standard and alternative to WELL, as well as to see where Fitwel fits into a spectrum of possibility for health, wellbeing, and sustainability.

Blake Jackson AIA, LEED BD+C, NCARB Sustainability Practice Leader Tsoi/Kobus & Associates

T28 LU/HSW | Education TrackCreating the Academic Acute Care Tower for the Future: The Penn Medicine Patient PavilionA world class team of designers and builders compris-ing the “PennFIRST Team” is planning a new Patient Pavilion for Penn Medicine. Using Integrated Project Delivery (IPD), the team is collaboratively solving com-plex urban planning, design and construction chal-lenges inherent in the 1.5 million SF facility on a dense site. Learn how shared integration space, parametrics, SWIFTs, HBDI, mock-ups and live simulations are being used for multidisciplinary collaboration, team problem solving and innovative thinking.

Christian Bormann AIA, LEED AP Director, HealthHDR

Stephen Greulich Sr PM, Real Estate, Design & Construction University of Pennsylvania Health System

Sean Manning PE Principal VHB Engineering

Kathryn Newcomb-DeSanto MSN RN MSW Clinical Liaison, PennFIRST, University of Pennsylvania Health System

2:00 - 3:30 PMT30 LU/HSW | Codes + Regulations TrackThe 2018 Guidelines: Major Revisions to Procedure, Operating, and Imaging RoomsThe draft 2018 FGI Guidelines for Design and Construc-tion documents re-align the definition and application of requirements for hospital and outpatient facility room-types where procedures take place based on lev-el of invasiveness and the perceived risk to the patient. A new imaging classification system and revised OR space requirements that provide clearances and ap-pendix text with guidance on determining OR size and layout will also be discussed.

Bryan Langlands AIA, ACHA, EDAC, LEED GA PrincipalNBBJ

T31 LU/HSW | Planning + Design TrackSystems Basics - Understanding the Systems and DesignThis course contains everything non-engineers need to know about the basic function and operation of HVAC, plumbing, fire protections, and electrical building sys-tems in an easy-to-understand way. Including is the dif-ference between certain systems, what they are, how they operate, and samples of what buildings they are in. It will cover how to incorporate the systems into the de-sign of building based on function, performance, clear-ances, and why systems are used within different build-ings. This course contains everything non-engineers (such as architects) need to know about the basic func-tion and operation of HVAC, plumbing, fire protections, and electrical (MEP/FP) building systems in an easy-to-understand way. Including in the subject matter is the difference between certain systems, what they are, how they operate, and samples of what buildings they are in. The class will also present how to incorporate the systems into the design of a building based on function, performance, clearances, etc., and why certain systems in actual buildings in Boston. For each MEP/FP building system covered, the instructors will include a list of lo-cal buildings that currently have the system in place.

Robert Persechini PrincipalRDK Engineers

Keith Giguere Senior Electrical Engineer/Project Manager/Senior Associate RDK Engineers

Karl Gebhardt Senior HVAC Engineer/Project Manager/Senior Associate RDK Engineers

T32 LU/HSW | Energy Performance TrackGetting to Zero: User Engagement in Achieving Net Zero EnergyOccupants play a significant role when it comes to build-ing energy use. Join us for an exploration of how design teams can bring occupants into the conversation about energy and building usage to achieve net-zero energy. This session will discuss the steps of the user engage-ment process and case study projects including the pro-

7 MED |ED FACILITIES

SESSIONS | Tuesday, April 4, 2017

MED |ED FACILITIES 8

Register on-line www.mededboston.com

posed net-zero energy King Open and Cambridge Street Upper Schools & Community Complex in Cambridge, MA.

Katherine Bubriski AIA, LEED BD+C Senior Associate Arrowstreet

Shannon Kaplan Project Manager In Posse

T33 LU/HSW | Education TrackDesigning Modern Wood Schools: A Guide for Architects and Structural EngineersThis course is intended for architects and structural engineers who are seeking a full system understand-ing of the unique design considerations associated with wood-frame schools. Architectural design and detail-ing topics specific to school performance criteria such as durability, fire and life safety, and allowable building size will be discussed. Schools space planning needs will be highlighted as will construction type selection and opportunities for wood use. Structural design steps, considerations, and detailing best practices related to gravity and lateral analysis of common school con-figurations such as classroom floor design and corridor wall framing will also be covered, along with options for wood-frame tall walls and long-span roofs in open areas such as gyms. With an emphasis on budget, this course will present designers with the information necessary to utilize wood framing as a cost savings tool.

Marc Rivard PE Regional Director WoodWorks

T34 LU/HSW | Sustainability + Resiliency TrackCrafting Accessible Landscapes for Ed and MED InstitutionsCan accessibility requirements enhance both universal usability and design integrity or are they a burden to the quality of a project’s design? This panel focuses on landscape architecture case studies of highly designed responses to specific accessibility regulations, discussed by the landscape architect, a state agency and an acces-sibility consultant.

Shauna Gillies-Smith ASLA, LEED AP, RLA Principal Ground Inc.

Emmanuel Andrade RA, NCARB, LEED AP Project Manager, Statewide Accessibility Initiative Division of Capital Asset Management & Maintenance

Olivera Berce RLA Senior Associate Ground Inc.

Josh Safdie Associate AIA Principal Kessler McGuinness & Associates, LLC

T35 LU/HSW | Building Materials TrackUnder Construction: Local LEED v4 Case StudiesWondering if your projects will meet new and expanded LEED v4 prerequisites? Concerned about the challenges of the new Materials Building Product Disclosure and Optimization (BPDO) credits? A panel of local sustain-able design experts will present a focused discussion of local recently completed and under construction LEED v4 projects including a medical office building, public school projects, and a college academic building. Discus-sion includes tips for achieving specific credits and a few challenges we encountered.

Sarah Michelman LEED BD+C RA Principal The Green Engineer

Gary Brock Architect HMFH Architects

Cynie Linton Associate, Senior Specifications Writer Symmes Maini and McKee Associates

Richard Moore Richard Moore Environmental Consulting

T36 LU/HSW | Planning + Design TrackCognitive Architecture: Neuroscience Informing DesignThis session reviews recent findings in cognitive science including looking at tools used to gather biometric data which can help us ‘see’ how people subconsciously take in their surroundings. It explains that one cannot pre-dict or explain human behavior in and around buildings without considering subconscious behavior and our evo-lutionary past. Our subconscious responses to edges, patterns - particularly faces - and shapes will be consid-ered along with how these findings can promote better healthier building design.

Ann Sussman AIA Architect, biometric researcher annsussman.com

Alexandra Purdy Tufts University

T37 LU | Technology TrackVirtual Reality & Mixed Reality in Healthcare and Educational Construction and Facilities VisualizationThe use of gaming technology has evolved in the con-struction industry. An innovation tool to visualize proj-ects, manage change and communicate ideas between the project teams and clients, Shawmut Design & Con-struction is an early implementer of Virtual Reality and Microsoft Hololens in the construction industry. The dis-cussion will focus on how VR is shaping the future of the construction industry visualization through an effective “Construction-aid” during preconstruction to step into the building job site before construction has even begun to review and avoid mistakes. Further, innovations and more immersive experiences such as the future for safety

planning are evolving rapidly. Case studies in health care and education will be presented including the WPI Foise Studio project and Harvard Cabot Library.

Mike Kearns LEED AP Project Executive - Regional Director Shawmut Design & Construction

Amr Raafat Manager of Virtual Studio Shawmut Design & Construction

T38 LU | Education TrackPros and Cons of Chapter 149 vs 149A Procurement for Owners & ArchitectsDiscussion of the costs and benefits of traditional lump sum bidding for public projects versus hiring a Construc-tion Manager at Risk (CMR) through the Ch. 149A process. The panel will include two Owner’s Representatives and an Architect. They will discuss lessons learned, current trends, costs differences, and recent changes in the Mas-sachusetts School Building Authority procedures which eliminated the incentive point for using a CMR.

Richard Marks President Daedalus Projects, Inc.

Timothy Bonfatti President Compass Project Management

Don Walter AIA, NCARB Principal Dore & Whittier Architects

4:00 - 5:30 PMT40 LU/HSW | Well-being + Design TrackFor Health: How buildings impact the way we think and feelBuildings have a profound impact on our health and well-being given that we spend 90% of our time indoors. In this session, we will describe the research conducted by the For Health team at the Harvard T.H. Chan School of Public Health. In particular, we will present findings from recent studies linking the built environment to cog-nitive function in commercial, academic, and residential settings. Importantly, we will discuss the design and op-eration solutions identified through the research to opti-mize buildings for health.

Piers MacNaughton Research Fellow Harvard School of Public Health

Memo Cedeno Research Associate Harvard T.H. Chan School of Public Health

Erika Eitland Doctoral Student Harvard T.H. Chan School of Public Health

Augusta Williams Doctoral Student Harvard T.H. Chan School of Public Health

T41 LU/HSW | Education TrackDesigning a High-Tech Building in a Historic Campus ContextCommissioned to design a state-of-the-art classroom building at Rutgers University on its historic College Av-enue campus, designers needed to create technically advanced classroom learning environments to optimize the students’ learning experience, while satisfying the in-dividual needs of 8 different academic departments. This session will examine the planning decisions the design team faced, from larger campus and site planning consid-erations to the metrics of specific classroom types.

John Martin AIA, LEED AP Principal Elkus Manfredi Architects

T42 LU | Building Materials TrackThe Architecture of Tilt-UpSuccessful Tilt-Up begins with process and education. However, when all the tools are in place and the right team put together, the results soar to awe-inspiring works of architecture that embody the creativity of the design and construction professionals that solve the problems of space, time, structure and program. This presentation offers the latest in innovative applications for Tilt-Up as the premier delivery vehicle for programs ranging from offices to schools, religious centers to in-dustrial products, housing to sports arenas and many more applications previously thought unimaginable.

Kimberly Corwin President & CEO AH Harris & Sons, Inc.

T44 LU/HSW | Medical TrackRight Sizing ED Expansion using Lean Process Design and SimulationConfronted with overcrowding and longer patient wait

times, today’s busy emergency departments are look-ing to expand their facilities in cost-effective ways and to improve operation efficiency. Using the Orange Regional Medical Center ED project as an example, Array will pres-ent how Lean techniques, such as gemba walk and pro-cess mapping, can be utilized to identify the root cause of hospital inefficiencies and to right-size their new ED facilities.

Kwang Lee AIA, LEED AP, Six Sigma Green Belt Studio Director Array Architects

Dan Russell AIA, LEED AP Healthcare Planner Array Architects

T46 LU | Education TrackThe Modernization & Revival of Duke University’s Historic West UnionCentral campus student unions and dining halls are in-tegral components of the university experience. This presentation will discuss the renovation of the historic Duke University West Campus Union to a fully modern-ized dining and gathering destination. We will present the challenges and successes of integrating the MEP/F in-frastructure to support the architectural design, distrib-uted commercial restaurant stations and a new, highly glazed central core.

John Saad LEED AP Managing Principal Vanderweil Engineers

Sarah Vaughan PE, LEED AP BD+C Lead Mechanical Engineer Vanderweil Engineers

T47 LU/HSW | Planning + Design TrackA Sneak Preview at the 2018 Guidelines – Are you Ready for Change?This session will highlight the key factors influencing the proposed changes in the draft 2018 FGI Guidelines for Design and Construction documents. The discussion will include a review of the Health Guidelines Revision Com-mittee’s “scrubbing” of the 2014 edition (e.g., removing outdated requirements, identifying best practice versus minimum requirement, and clearing up conflicts) and how cost/benefit analysis will be a factor in determining the final language.

Douglas Erickson FASHE, CHFM, HFDP, CHC CEO Facility Guidelines Institute

Dana Swenson PE, MBA Senior Vice President/Chief Facilities Officer UMass Memorial Health Care System

T48 LU | Technology TrackVirtual Reality for BIMThis presentation will explore the new opportunities that Virtual Reality presents for a BIM project. We will look at the way that Virtual Reality can assist in evaluating a de-sign at each project stage, and how Virtual Reality can bring new insights into the planning and coordination process. Please join us for an in depth discussion with some of the Virtual Reality industry’s leading voices (as well as a really cool demonstration).

Jeffrey Olinger AIA Architect William Rawn Associates

9 MED |ED FACILITIES

SESSIONS | Tuesday, April 4, 2017

Complimentary SessionsTUESDAY, APRIL 411:15 AM – 12:30 PM X10 LU | Building Materials TrackAdvanced Coatings Technology & the Sustainability Movement Looking for what’s new in architectural coatings for the purposes of LEED®or as a zero-or low-VOC solution for any building project? This course will ex-plore the evolution of the green build-ing movement, and discuss how it has revolutionized the paint industry. We will cite lessons learned from the past, explore innovative coating technolo-gies, and consider the future of the sustainability movement.

Speaker:Mark T. Weiner AIA, CSI, IIDA New England Architectural & Industrial Account Executive, The Sherwin-Williams Company

WEDNESDAY, APRIL 512:45 PM – 2:00 PMZ31 LU | Building Materials TrackSeamless Floors and Wall Systems This program walks through various coatings, slurries, broadcasts, and trowel applied flooring systems. Em-phasis is provided on surface prepa-ration and installation requirements. Industrial and decorative systems are outlined including benefits, limitations and type of areas for installations.

Speaker:Mark T. Weiner AIA, CSI, IIDA New England Architectural & Industrial Account Executive, The Sherwin-Williams Company

WEDNESDAY, APRIL 54:00 PM – 5:30 PM W40 LU | Education Track

Maximizing Energy Efficiency & Generation with the Integration of Spray Polyurethane Foam Roofing & Photovoltaics Systems on Educational FacilitiesEnergy solutions have become of para-mount importance in the built environ-ment, and this is also true for educa-tional facilities. Important drivers for energy solutions are the burgeoning Zero Net Energy movement, increas-ingly stringent building codes and the general move toward reducing the fos-sil fuel consumption associated with heating and cooling demand in build-ings. High performance materials to help accomplish energy goals in educa-tion facilities are readily available and

the roof of the structure is a key focal point. Spray Polyurethane Foam Roof-ing provides exceptional protective capabilities and energy efficiency per-formance. When you marry the mate-rial with energy generating Photovolta-ics, the combined solution provides an optimal solution for schools, colleges, and other similar facilities. This session will explore how best to join the two systems and delve into key consider-ations for optimizing performance.

Speakers:Rick Duncan Spray Polyurethane Foam Alliance (SPFA)Luke Nolan Central Coating Company Inc.Bruce Schenke Accella Polyurethane Systems, LLCRon Winkle Roof Asset Management

MED |ED FACILITIES 10

SESSIONS | Wednesday, April 5, 2017 8:00 - 9:30 AMW10 LU/HSW | Codes + Regulations TrackImproving Safety and Security in Health Care FacilitiesAddressing security issues during the initial stages of design development has a tremendous impact on the effectiveness of operational security procedures and protocols put in place upon project completion. This presentation will describe the process that FGI and IAHSS use to develop guidelines specific to health care security and safety and emergency management and will address revisions to the emergency preparedness and management sections in the draft 2018 FGI Guide-lines.

Kevin M. Tuohey CHPA Executive Director, Research Compliance Boston University and Boston Medical Center

W11 LU/HSW | Medical TrackApplicability of Health Communication Theories to Environment of Care DesignThis session will begin with a review of the effects of the built environment on information consumption and decision-making in the healthcare sphere. The team will demonstrate the potential applicability of health communication theories in both the creation of spe-cialized prediction metrics as well as to the space de-sign process for directed enhancement of information consumption. We shall use data from four large health-care systems, each representing a distinct region of the United States. We will categorize environments of care by acuity, and each system will include space represen-tations across the acuity spectrum.

Fady Barmada AIA, LEED AP Lean Six Sigma Green Belt Practice Leader, Strategy Advisory Services Array Advisors

Carlin Henry PhD Professor, Communications Rowan University

W12 LU/HSW | Building Envelope TrackBuilding Enclosure Compliance Testing - The How and WhyBuilding enclosure compliance testing can be confus-ing with numerous tests and approaches. Designers and owners are not always clear on what to include, why, or if it is worth the cost and schedule impacts. As a result, testing programs often fall short of expecta-tions, causing frustration and schedule delays. This presentation will work to demystify conformance testing by reviewing typical construction testing tech-niques with case studies, discussing how to execute and what the results mean.

Daniel Clark Engineer Simpson Gumpertz and Heger

Kelsey Dunn Staff II 5 Simpson Gumpertz and Heger

W13 LU/HSW | Building Envelope TrackThe Case for Modular Design in Small Healthcare Renovation Projects3D and digital fabrication tools have been used for de-cades in large, new building construction. In a recent healthcare renovation project, a design team executed a process that leveraged these big building tools to optimize the design, timeline, and delivery of a small healthcare space. This discussion will outline how a modular approach enabled a patient recovery area to stay operational Monday – Friday during construction while providing seamless continuity in patient care.

Susan Blomquist AIA, LEED AP Senior AssociatePayette Associates, Inc.

Marc Fishman Project Manager Walsh Brothers, Inc.

Ahin Handa Project Manager Massachusetts General Hospital

Parke MacDowell Architect Payette Associates, Inc.

W14 LU/HSW | Energy Performance TrackUnlocking Hidden Energy Savings for Schools and Hospitals through Energy StorageRenewable energy, which is intermittent, is transform-ing the grid into an energy network. Utilities use signals and rates to shape consumption. Buildings with energy storage add resiliency to the grid and can make smart-er energy purchases. For example, in Boston, nighttime energy is nearly 80% less expensive than daytime en-ergy due to demand charges. Attendees will learn how to understand their bills and tariffs to be prepared for upcoming changes while saving on energy costs.

Paul Valenta LEED AP VP of Sales & Marketing CALMAC Corp.

W15 LU/HSW | Medical TrackWhat Happens the Day After Open HouseWe will discuss how to “Future-Proof” a facility from both a clinical and technology perspective and by do-ing so, can “Obsolete Obsolescence.” We will demon-strate how to maximize work flow, minimize workplace risk (ergonomics) and reduce both construction costs and long-term maintenance and operating expenses.We will discuss at length, the difference between “man-aging” clinical environments and patient care technol-ogy versus merely “dealing” with the space as it was in-stalled.Perception drives reality. The organized patient care environment will support HCAHP score initiatives and reduce wasted time searching for needed clinical supplies, therefore improving patient care.

Gary Schindele President Paladin Healthcare LLC

W16 LU/HSW | Sustainability + Resiliency TrackDesigning for WellnessUtilizing 2000 Tower Oaks Blvd as a case study, the evo-lution and progression of building health and wellness will be assessed and discussed. Building materials, fresh air intake, natural daylighting, and energy con-servation will be expounded upon. Innovative strate-gies and cutting edge design examples will guide the conversation centered on occupant health. It is no lon-ger enough to have a building that is efficient, medical facilities must promote wellness and instill motivation.

Manoj Dalaya AIA, AICP, CSI, LEED AP BD+C, RA Principal Kishimoto.Gordon.Dalaya PC

Shane Trexler Energy Engineer Kishimoto.Gordon.Dalaya PC

W17 LU/HSW | Codes + Regulations TrackTackling the challenge: the new MA Energy CodeThe MA IECC 2015 Energy Code, effective on January 2017, raises the bar for energy efficiency and continues a trend of 3 yr. cycled energy code upgrades towards a 2030’s Zero Net Energy Objective. Learn the econom-ics of cost-effective energy efficiency design strategies to achieve 15%-25% or better energy performance be-yond IECC 2015, supported with compliance paths to the section C406 additional efficiency requirements, now including renewable energy, and the updated Stretch Code. We will share the findings of a research study looking into energy efficiency measures’ incre-mental costs and paybacks, including a few building project case studies.

Martine Dion AIA, LEED BD+C, NCARB Director of Sustainable Design SMMA

Francis Boucher Senior Engineer, New products and Services National Grid; Martine

FREE ADMISSION to the exhibit hall

and workshop discounts if you register by March 20

11 MED |ED FACILITIES

SESSIONS | Wednesday, April 5, 2017W18 LU/HSW | Codes + Regulations TrackThe ADA Standards for Accessible Design: What Medical Centers Need to KnowDrawing from our work with Boston-based medical centers, we will discuss key aspects of the ADA Stan-dards that are confusing or often overlooked. Do you know which of the following needs to be wheelchair accessible: sinks in exam rooms, sinks in cafeteria kitchens, sinks in laboratories and/or sinks in employ-ee break areas? Do all single-user toilet rooms need to be accessible or just a percentage? We will review the U.S. Access Board’s accessibility standards for medical diagnostic equipment and the Department of Justice’s guidance for design of medical facilities.

Kathy Gips Director of Training, IHCD’s New England ADA Center

Stacy Hart ADA Trainer, Information and Outreach Specialist IHCD’s New England ADA Center

10:00 - 11:30 AMW20 LU/HSW | Acoustics TrackPatient Privacy & Tranquility: Creating Optimal Healing EnvironmentsPatient privacy and tranquility are top priorities for healthcare facilities to reduce stress and promote healing. This presentation will review options for pri-vacy, lighting and sound control, and will further detail recent case studies from Chicago’s Lurie Children’s Hospital, Baltimore’s Mercy Medical Center NICU and California’s Glendale Adventist Medical Center. It will also illustrate how good design can dampen noise and create a healing environment that is less stressful and more restful for patients.

Octavio Valdivia RA Architectural Sales Representative Unicel Architectural

W21 LU/HSW | Planning + Design TrackHow Humans Internalize and Express ArchitectureThe goal of this presentation is to understand how hu-mans internalize their architectural work environment and how they physically reveal that experience. The presentation will first explain the neurology of how sen-sory information is received through the eyes, ears, and nose for the academic benefit of the architect. We will examine the use of biophilic elements applied in archi-tecture design. Architectural elements in this presenta-tion will focus on windows, walls, floors, ceilings and lighting. Furthermore it will discuss color and sound.

This presentation will attempt to explain the neurologi-cal effects when exposed to these specific biophilic and other architectural elements. With this information, we will consider the study of the physiological effects mea-sured by tracking the occupant’s galvanic skin response (GSR), heart rate, blood pressure and both cognitive and psychological questionnaire responses. Under-standing of this biophilic connection supported with the physiological and psychological human responses to stress can lead to valuable evidence-based design re-search. This presentation will discuss how the research team plans to conduct and collect data through quali-tative methods of subjective questionnaires, as well as perform physiological data tracking. The presentation will also suggest ways to initiate collaborative research with other interdisciplinary fields.

Tuwanda Green AIA, LEED BD+C, NCARB Facilities Architect US Dept. of Defense - Air Force Civilian

W22 LU/HSW | Case Study TrackRising to the Challenge on Campus: An Owner’s PerspectiveAs designers and builders lead the charge to create low-energy, healthy, and naturally inspired buildings owners remain hesitant to commit to new standards in sustainable design. What can motivate building owners to pursue the Living Building Challenge (LBC)? How do we find (and encourage) those who are asking “What’s beyond LEED?” LBC building owners will share their ex-periences of rising to meet the challenge.

Deborah Frieze Owner of Old Oak Dojo

DiAnn Mroszczak LEED BD+C Designer PCA

Carl Weber Project Manager Hampshire College

W23 LU/HSW | Energy Performance Track“Zero Energy” and “Cost Competitive” - Can These Go TogetherZero Energy - or “Net Zero Energy” buildings have come a long way. Experience, technology, new approaches, and many other factors have advanced, to the point where Zero Energy can be cost competitive when tax incentives, renewable energy credits, and financing are applied. The workshop will examine these trends and present both residential and commercial case studies which demonstrate how Zero Energy can actu-ally cost less, not more, to build.

Jacob Knowles LEED AP Director of Sustainable Design Bard, Rao + Athanas, Consulting Engineers LLC

Paul Ormond Energy Efficiency Engineer Commonwealth of Massachusetts Department of Energy Resources (DOER)

Alex Pollard LEED BD+C Energy Efficiency Commercial Programs Manager Commonwealth of Massachusetts Department of Energy Resources (DOER)

W24 LU/HSW | Energy Performance TrackHuman-Centric Lighting - What Does it Mean and How do We Provide it in Practice?Human-centric lighting is lighting devoted to enhanc-ing vision, well-being and performance individually or in some combination. As such, human-centric lighting must consider the effects of light exposure on both visual and non-visual aspects of human physiology in a lighting design - and lighting design is increasingly called upon to support circadian, or non-visual, needs for users across societal segments. Home or hospital, office or classroom, recognition that disruption of 24hr rhythms can impact mood, alertness and performance presents new challenges to development and deploy-ment of lighting systems. The awareness and scientific evidence that people need the right light at the right time for the health and well-being has grown consid-erably in recent years. As such human-centric lighting starts to play an essential role in creating environ-ments that look beyond illumination. This presenta-tion will look at the broad umbrella of human-centric lighting, explain circadian light, show examples of ap-plication techniques, and look at the tools and tech-nologies available to support both.

Patricia Rizzo MSc, IES, LEED AP Senior Lighting Applications Developer, Philips Lighting Research North America

W25 LU/HSW | Codes + Regulations TrackThe Impact of the MA Stretch Energy CodeThe impact the Stretch Code has had on the design and performance of commercial buildings during that period. The session will focus on project’s in The Green Engineer, Inc. portfolio. We’ll look at the changes to building design fostered by the more stringent code, and share follow up data to see if the buildings have performed as well as predicted.

Christopher Schaffner LEED BD+C, PE President The Green Engineer

W26 LU/HSW | Energy Performance TrackThe Integration of a High Performance Science BuildingDuring our presentation, we will identify these chal-lenges and provide insight into how Vanderweil incor-porated the new science center into the Umass/Boston Campus with high performance engineering systems design in order to achieve a 25% premium (energy cost savings) over ASHRAE 90.1-2007 baseline (appendix G).

John Saad LEED AP Managing Principal Vanderweil Engineers

Harris Zeidman Lead Mechanical Engineer Vanderweil Engineers

FREE ADMISSION to the exhibit hall

and workshop discounts if you register by March 20

MED |ED FACILITIES 12

Register on-line www.mededboston.com

W27 LU/HSW | Codes + Regulations TrackNew FGI Guidelines Document Dedicated to Outpatient FacilitiesThe draft of the 2018 Guidelines for Design and Con-struction provides three standalone documents for Hospitals; Outpatient Facilities; and Residential Health, Care, and Support Facilities. This presentation will dis-cuss the evolution from one document into three and explore new text that will be applied to outpatient fa-cilities, including material on accommodations for the care of patients of size, telemedicine spaces, pre- and post-procedure patient care areas, waiting areas, and mobile/transportable medical units.

Kirsten Waltz AIA, LEED AP, ACHA, EDAC. LEED GA President, U.S. Operations Steffian Bradley Architects

W28 LU/HSW | Building Materials TrackFrom Research to Specification to Healthier EnvironmentsBuilding materials and design, and subsequent indoor environmental quality, affect occupant health. This workshop will highlight the current research findings related to building material and consumer product chemicals, summarize research on the intersection between indoor air quality on cognitive function, de-scribe a case study of moving from research to practice in higher education, and discuss how recommenda-tions are successfully incorporated into material speci-fication and building design.

Robin Dodson PhD Research Scientist Silent Spring Institute

Heather Henriksen Director of the Harvard University Office for SustainabilityHarvard University

Greta Eckhardt AIA, CSI, CCS Senior Specifications Writer Payette Associates, Inc.

Lisa Goodwin Robbins RA, CCS, LEED AP Associate Principal Kalin Associates, Inc.

2:00 - 3:30 PMW30 LU/HSW | Education TrackLearning Environments for Children with Developmental DisabilitiesThe session will present design concepts and strate-gies that promote innovative interiors and outdoor learning environments that enhance a holistic learning experience of students with mild to moderate intellec-tual disabilities. The session will visually summarize the objectives and conduct an interactive activity and discussion.

Michael Van Hamel PhD, RA Senior Design Architect SMMA

W31 LU/HSW | Energy Performance TrackA Zero Net Energy Teaching Laboratory - The First 6 MonthsOpen since June 2016, Bristol Community College’s 50,600 sf Zero Net Energy (ZNE) chemistry, biology, and health science education building is one of the few ZNE buildings of its kind in the world. In this session, we will discuss our game-changing approach to making this possible for an energy dense building type in a chal-lenging climate.

Jacob Knowles LEED AP Director of Sustainable Design Bard, Rao + Athanas, Consulting Engineers LLC

Tony Petone Principal BR+A Consulting Engineers

Chris Widzinski Sustainable Design Engineer BR+A Consulting Engineers

Nathan Butt AIA, LEED AP BD+C Associate Sasaki Design

W32 LU/HSW | Sustainability + Resiliency TrackBuilding Enclosure Compliance Testing - The How and WhyResiliency is the ability to recover from or adapt to mis-fortune or change. We expect our healthcare facilities to house and treat vulnerable populations in times of extreme weather events and their aftermath. The panel will cover how healthcare building owners/ op-erators can assess vulnerabilities to extreme weather events and other risk factors and how to begin to ad-dress them. They will cover various strategies to im-prove the performance of buildings and foster passive survivability.

Wagdy Anis FAIA, LEED AP Principal Anis Building Enclosure Consulting

David Burson AIA, LEED AP Senior Project Manager Partners HealthCare Real Estate and Facilities

Alejandra Menchaca PhD, LEED AP Senior Building Scientist Payette Associates, Inc.

Deborah Rivers AIA, LEED AP BD+ Senior Healthcare Architect/Sustainability Leader HDR

W33 LU/HSW | Medical TrackWelcoming Campuses, Wayfinding that Works for EveryoneDuring a time when attracting students and cultural, gender and social divisions are pressing issues in higher education, wayfinding often takes a back seat or is an afterthought in the design of a campus or facility. Su-per, IHCD’s Universal Design Wayfinding Specialist, will present on how a multi-sensory approach to the design of a comprehensive wayfinding system can go a long way in setting a welcoming, inviting and user-friendly tone. By balancing extensive research with a focus on design decision-making she shows how to achieve de-sign that not only facilitates learning, but design that also communicates that all students, staff and visitors are welcomed and supported. Super’s session begins with a look at the wayfinding needs that are innate in

all of us. It focuses on the different audiences and their journeys through facilities, laying out the design and behavior issues that need to be considered, including planning for arrival, orientation on site, exterior way-finding, interior wayfinding, and user participation in facility design, and more.

Ruth Super Associate AIA, LEED AP IHCD Wayfinding Specialist, Institute for Human Centered Design

Valerie Fletcher Executive Director, Institute for Human Centered Design

W34 LU | Marketing + Practice TrackImportant Considerations when Entering into Government Contractor Teaming AgreementsThere are many traps for the unwary contractor when considering the preparation of a Teaming Agreement. Learn the basic requirements of Teaming Agreements, including when and why they are used and strategies to avoid problems when bidding projects and after work is under way.

Laurence Richmond JD Richmonds & Co. LLC

W35 LU | Technology TrackApplying Virtual Reality to Your Client MeetingVirtual reality is a powerful tool for designers. While still in the early stages of development in architecture, with this tool, we can offer our clients a familiar language for understanding design, beyond the interpretation of 2D drawings. But how does one successfully incorporate into a user group meeting? This session will not only provide a foundation of understanding in VR, but also guidelines to effectively implement in client meetings and project examples.

Angeline Focht Architecture Shepley Bulfinch

Anna Mancini NCIDQ, LEED ID+C Interior Design Shepley Bulfinch

W36 LU/HSW | Codes + Regulations Track2012 Edition of NFPA 99 - What You Should KnowThe long awaited announcement from CMS that the 2012 editions of NFPA 99 and 101 have finally occurred. With an effective date of July 5, 2016, this is now a real-ity for facilities. This session will detail key provisions you should be aware of in the 2012 edition of NFPA 99.

Jason D’Antona LEED AP, PE Principal Thompson Consultants, Inc.

Jonathan Hart Senior Fire Protection Engineer National Fire Protection Association

13 MED |ED FACILITIES

SESSIONS | Wednesday, April 5, 2017W37 LU/HSW | Codes + Regulations TrackCommon Code MistakesThis seminar reviews the most common building code mistakes we have encountered in our work. Issues in-clude mistaken interpretations, common oversights, and common variances which are assumed to be al-lowed as-of-right. We will review example cases for many of the issues to demonstrate the impact these mistakes can have on a project. Code provisions for new and existing buildings will be addressed.Share a greater understanding of the building code require-ments.Increase awareness of life safety design fea-tures.Improve future work through the elimination of common mistakes.Understand potential alternative solutions.

Don Contois Associate R. W. Sullican Engineering

W38 LU/HSW | Sustainability + Resiliency TrackBuilding a Healthy Campus: The WELL Building StandardThe Introduction to the WELL Building Standard pre-sentation provides an overview of the WELL Building Standard ideology, structure, and certification pro-cess. The medical basis for the concept categories is introduced along with design and construction strate-gies to create healthy buildings. The time has come to elevate human health and comfort to the forefront of building practices and reinvent buildings that are not only better for the planet—but also for people. This presentation will introduce how to do this using the WELL Building Standard as the framework.

Sarah Welton Senior Associate, Technical Programs and Support International WELL Building Institute

4:00 - 5:30 PMW41 LU/HSW | Energy Performance TrackDesigning for Net Positive Water and EnergyNet positive energy is a key component in the battle against climate change. Buildings emit nearly 50% of carbon emissions, and architects can play a leader-ship role in moving beyond incremental reductions to regenerative design now. Net positive water design is more nuanced. Institutions of higher learning can pro-vide thought leadership by advocating for global water awareness, even if water is plentiful on a local level. Regulatory agencies are not prepared for the conver-sation, but in some cases are helpful in moving dem-onstration projects forward. In this session, you’ll hear from architects who are designing net positive energy and net zero water systems for a 16,000 sf, two-story campus building. Topics explored: - Performance goals and philosophy behind net positive design - Design con-cept and construction details behind energy systems - All aspects of water systems, including rainwater collec-

tion, filtration, composting, grey water treatment, and storm water management - The regulatory and permit-ting processes.

Jason Forney AIA, LEED BD+C Principal Bruner/Cott Architects

Jason Jewhurst Principal Bruner/Cott Architects

W43 LU/HSW | Case Study TrackComprehensive Analysis of Accessibility Compliance as a Tool for Diversity and Inclusion in Higher Education: A Case StudyThe ‘new normal’ includes a higher proportion of atypical students who may be older, international stu-dents or immigrants, veterans, have families, and are more likely to pursue an education that is a hybrid of traditional live classes and distance learning. At the same time, the prevalence and profile of disability in college and university communities is changing. Staff and faculty have a higher proportion of people over 55 and students with disabilities are predominantly pre-senting - whether disclosing a disability or not - with brain-based conditions or chronic health conditions. “Just tell me what I have to do” isn’t enough. Fletcher will use a case study of a comprehensive consultation in Atlanta to illustrate how to: •Understand current expectations for public and pri-

vate entities under ADA, Fair Housing, and state ac-cessibility codes.

•Understand the value of considering compliance as a floor and committing to enhanced usability and inclusive design to improve performance and well-being for everyone.

•Learn to unravel the distinct challenges of evaluating “program accessibility” as the means to prioritizing facility renovations.

•Appreciate the multiple strategies that make sense for evaluating accessibility for the out of doors.

•Learn to assess how to plan for building organizational capacity that will support reliable performance after the consultation is completed.

Valerie Fletcher Executive Director, Institute for Human Centered Design

Neda Norouzi B.Env.D, M.Arch, MURP, PhD Campus Design & Planning, Virginia Tech

W44 LU/HSW | Sustainability + Resiliency TrackThe Role of the Roof in Resilient Building DesignWithout building codes/standards to guide designers to design resilient buildings, what are the best prac-tices that can be employed in new construction and retrofit/re-roof projects? This presentation will review what the trade associations and code/standards are discussing about resiliency and what are now currently

thought of as best practices resilient roofing design. A case study of a reroofing project will be presented to review important design considerations to achieve a truly resilient roof system.

Tom Hutchinson AIA, CSI, RRC Principal Hutchinson Design Group

Ellen Thorp CAE Associate Executive Director EPDM Roofing Association

W45 LU/HSW | Energy Performance TrackBuilding IoT: A Non-Invasive Energy Upgrade for Healthcare FacilitiesWhen implementing energy upgrades in healthcare facilities, an approach of caution must be taken as patient care takes priority. The good news is that the industry is shifting from disruptive infrastructure up-grades to consistent optimization - made possible through new, non-invasive IoT-enabled technologies.

Kevin Debasitis Director, Building Solutions BuildingIQ

W47 LU | Building EnclosuresOvercoming the Performance Challenges of Glass FacadesGlazed facades are intended to provide transparency, daylight and connection but drive up energy consump-tion, increase opportunities for occupant discomfort and challenge budgets. This presentation will use a real project to illustrate the collaborative approach that pulled architects, consultants, and engineers out of their silos to explore strategies that benefit both the design intent and performance of glazed facades. Participants will be guided through how the key met-rics used to measure performance were defined, the integrated process used to analyze the facade, and the evolution of the design reasoning behind the final outcome. The session will cover how an array of simu-lations performed by different team members were integrated to inform how the glass type and, space conditioning strategies, including natural ventilation, chilled beams and shading system, were selected and optimized. The session will conclude with each of the presenters-architect, building scientist, mechanical engineer and sustainable design consultant-sharing their perspective on key take-aways they intend to use on future projects with different team members.

Jeffrey Abramson AIA, LEED AP NCARB Associate, Payette

Bungane Mehlomakulu Principal Integral Group

Alejandra Menchaca PhD, LEED AP BD+C Senior Building Scientist / Associate Payette

MED |ED FACILITIES 14

Jeffrey Abramson AIA, LEED AP ........................W47 NCARB Associate, Payette

Emmanuel Andrade RA, NCARB, LEED AP ....T34 Project Manager, Statewide Accessibility Initiative, Massachusetts Div of Capital Asset Management & Maintenance

Wagdy Anis LEED AP ................................................ W32Principal, Anis Building Enclosure Consulting

Fady Barmada AIA, LEED AP ................................ W11 Lean Six Sigma Green Belt Practice Leader, Strategy Advisory Services, Array Advisors

Michael Benedetto .....................................................T16 Vice President - Regional Executive, Skanska USA Building

Olivera Berce RLA .......................................................T34 Senior Associate, Ground Inc.

Susan Blomquist AIA, LEED AP ..........................W13 Senior Associate, Payette Associates, Inc.

Timothy Bonfatti ........................................................T38 President, Compass Project Management

Christian Bormann AIA, LEED AP.......................T28 Director, Health, HDR

Francis Boucher..........................................................W17 Senior Engineer, New products and Services National Grid

Joe Breen LEED AP .....................................................T16 Senior Vice President, Skanska USA Building

Gary Brock ......................................................................T35 Architect, HMFH Architects

Katherine Bubriski AIA, LEED BD+C .................T32 Senior Associate, Arrowstreet

Steven Burke .................................................................T24 Sustainability Manager,Symmes Maini & McKee Associates

David Burson AIA, LEED AP ................................. W32 Senior Project Manager, Partners HealthCare Real Estate and Facilities

Nathan Butt AIA, LEED AP BD+C........................W31 Associate, Sasaki Design

Memo Cedeno ...............................................................T40 Research Associate, Harvard T.H. Chan School of Public Health

Daniel Clark ..................................................................W12 Engineer, Simpson Gumpertz and Heger

Don Contois.................................................................. W37 Associate, R. W. Sullican Engineering

Kyle Corkum ..................................................................T10 Managing Partner, LStar Land

Kimberly Corwin ......................................................... T42 President & CEO AH, Harris & Sons, Inc.

Manoj Dalaya AIA, AICP, CSI, LEED AP BD+C, RA ........ ..............................................................................................W16 Principal, Kishimoto.Gordon.Dalaya PC

Jason D’Antona LEED APPE ................................ W36 Principal, Thompson Consultants, Inc.

Kevin Debasitis .............................................................W45 Director, Building Solutions, BuildingIQ

Martine Dion AIA, LEED BD+C, NCARB ...........W17 Director of Sustainable Design, SMMA

Robin Dodson PhD .................................. W28 Research Scientist, Silent Spring Institute

Rick Duncan PE, PhD .............................................. W40 Technical Director, Spray Polyurethane Foam Alliance (SPFA)

Kelsey Dunn ..................................................................W12 Staff II, 5, Simpson Gumpertz and Heger

Greta Eckhardt AIA, CSI, CCS ............................. W28 Senior Specifications Writer, Payette Associates, Inc.

Erika Eitland ..................................................................T40 Doctoral Student Harvard T.H. Chan School of Public Health

Douglas Erickson FASHE, CHFM, HFDP, CHC .......... .................................................................................... T20, T47 CEO, Facility Guidelines Institute

Marc Fishman ..............................................................W13 Project Manager, Walsh Brothers, Inc.

David Flanagan ............................................................T16 Director of Engineering, Infrastructure and Research Facilities Planning, Beth Israel Deaconess Medical Center

Valerie Fletcher ............................................. W33, W43 Executive Director, Institute for Human Centered Design

Angeline Focht ........................................................... W35 Architecture, Shepley Bulfinch

Jason Forney AIA, LEED BD+C ............................W41 Principal, Bruner/Cott Architects

Deborah Frieze ........................................................... W22 Owner, Old Oak Dojo

Kathryn Gallagher .....................................................T13 Clinical Liaison Real-estate Design & Construction Penn Medicine, University of Pennsylvania Health System

Karl Gebhardt ...............................................................T31 Senior HVAC Engineer/Project Manager/Senior Associate, RDK Engineers

Keith Giguere ...............................................................T31 Senior Electrical Engineer/Project Manager/Senior Associate, RDK Engineers

Shauna Gillies-Smith ASLA, LEED AP, RLA ...T34 Principal, Ground Inc.

Kathy Gips......................................................................W18 Director of Training, IHCD’s New England ADA Center

Lisa Goodwin Robbins RA, CCS, LEED AP ...................................................................................................T24, W28 Associate Principal, Kalin Associates, Inc.

Tuwanda Green AIA, LEED BD+C, NCARB .... W21 Facilities Architect, US Dept. of Defense - Air Force Civilian

Stephen Greulich ........................................................T28 Sr PM, Real Estate, Design & Construction University of Pennsylvania Health System

Ahin Handa ....................................................................W13 Project Manager, Massachusetts General Hospital

Christopher Hardy .....................................................T12 Associate, Sasaki Associates

Jonathan Hart ............................................................ W36 Senior Fire Protection Engineer National Fire Protection Association

Stacy Hart .....................................................................W18 ADA Trainer, Information and Outreach Specialist IHCD’s New England ADA Center

Carrie Havey LEED BD+C Sr. .................................T24Project Manager, The Green Engineer

Heather Henriksen .................................................. W28Director of the Harvard University Office for Sustainability, Harvard University

Carlin Henry PhD .......................................................W11Professor, Communications, Rowan University

Shawn Hesse LEED AP, RA .....................................T18Boston Office Leader, emersion DESIGN

Tom Hutchinson AIA, CSI, RRC .......................... W44Principal, Hutchinson Design Group

Blake Jackson AIA, LEED BD+C, NCARB .........T27Sustainability Practice Leader Tsoi/Kobus & Associates

Jason Jewhurst ..........................................................W41Principal, Bruner/Cott Architects

Mark Kalin FAIA FCSI LEED ....................................T25Principal, Kalin Associates Inc.

Shannon Kaplan ..........................................................T32Project Manager, In Posse

Gerard Kavanaugh .....................................................T10Senior Assistant Chancellor, UMASS

Mike Kearns LEED AP ................................................T37Project Executive - Regional Director Shawmut Design & Construction

Nationally Recognized Speakers

15 MED |ED FACILITIES

Jane Kleinman .............................................................T26Director of Experiential and Health Education Sasaki Associates

Jacob Knowles LEED AP ............................ W23, W31Director of Sustainable Design Bard, Rao + Athanas, Consulting Engineers LLC

Ted Landsmark ............................................................T10President Emeritus, Boston Architectural College

Bryan Langlands AIA, ACHA, EDAC. LEED GA ......T30Principal, NBBJ

Kwang Lee AIA, LEED AP .........................................T44Six Sigma Green Belt Studio Director Array Architects

Cynie Linton ...................................................................T35Associate, Senior Specifications Writer Symmes Maini and McKee Associates

Donal Lyons....................................................................T21Virtual Construction Manager, Structure Tone, Inc.

Parke MacDowell .......................................................W13Architect, Payette Associates, Inc.

Piers MacNaughton ...................................................T40Research Fellow, Harvard School of Public Health

Anna Mancini NCIDQ, LEED ID+C...................... W35Interior Design, Shepley Bulfinch

Arjun Mande .................................................................T22Associate Principal, Goody Clancy

Sean Manning PE ........................................................T28 Principal, VHB Engineering

Richard Marks ..............................................................T38President, Daedalus Projects, Inc.

John Martin AIA, LEED AP ...................................... T41Principal, Elkus Manfredi Architects

Conor McGuire ..............................................................T24Director of Sustainability, Columbia Construction

Bungane Mehlomakulu ..........................................W47Principal, Integral Group

Alejandra Menchaca PhD, LEED AP .... W32, W47Senior Building Scientist, Payette Associates, Inc.

Sarah Michelman LEED BD+C, RA......................T35Principal, The Green Engineer

Richard Moore ..............................................................T35Richard Moore Environmental Consulting

DiAnn Mroszczak LEED BD+C ............................. W22Designer, PCA

Kathryn Newcomb-DeSanto MSN RN MSW .T28 Clinical Liaison, PennFIRSTUniversity of Pennsylvania Health System

Luke Nolan ................................................................... W40President, Central Coating Company Inc.

Neda Norouzi ...............................................................W43B.Env.D, M.Arch, MURP, PhD, Campus Design & Planning, Virginia Tech

Jeffrey Olinger AIA.....................................................T48Architect, William Rawn Associates

Paul Ormond ............................................................... W23Energy Efficiency Engineer Commonwealth of Massachusetts Department of Energy Resources (DOER)

Robert Persechini ......................................................T31Principal, RDK Engineers

Tony Petone ..................................................................W31Principal, BR+A Consulting Engineers

Alex Pollard LEED BD+C ........................................ W23Energy Efficiency Commercial Programs ManagerCommonwealth of Massachusetts Department of Energy Resources (DOER)

Jefferson Poole AIA, LEED BD+C ........................T22Associate Principal, Goody Clancy

Cathy Poon .....................................................................T26Associate Dean of Interprofessional Education & Chair Dept of Pharm Practice & Pharm Admin University of the Sciences in Philadelphia

Alexandra Purdy .........................................................T36Tufts University

Amr Raafat .....................................................................T37Manager of Virtual StudioShawmut Design & Construction

Brenda Reig ...................................................................T13Senior Clinical Informatics ConsultantBurwood Grooup

Laurence Richmond ................................................ W34JD Richmonds & Co. LLC

Marc Rivard PE .............................................................T33Regional Director, WoodWorks

Deborah Rivers AIA, LEED AP BD+C ................ W32Senior Healthcare Architect/Sustainability Leader , HDR

Steve Rizzo .....................................................................T16President, Synergy Consultants, Inc.

Julia Rogers LEED AP BD+C, CSM ......................T21Sustainable Design Practice Leader Vanderweil Engineers

Kenneth Rubinstein ..................................................T10Director, PretiFlaherty

Dan Russell AIA, LEED AP .......................................T44Healthcare Planner, Array Architects

John Saad LEED AP ........................................T46, W26Managing Principal, Vanderweil Engineers

Josh Safdie Associate AIA ......................................T34Principal Kessler, McGuinness & Associates, LLC

Christopher Schaffner LEED BD+C, PE ......... W25President, The Green Engineer

Bruce Schenke............................................................ W40Business Manager – RoofingAccella Polyurethane Systems, LLC

Gary Schindele ............................................................W15 President Paladin, Healthcare LLC

Neetu Siddarth ............................................................ T17Senior Building Performance Analyst The Green Engineer

Thomas Simister AIA, LEED AP BD+C ..............T26Architect, Sasaki Associates

Craig Simmons LEED AP, PE .................................. T17Energy Consultant, VEIC

Ruth Super ....................................................................W18Assoc AIA, LEED AP IHCD Wayfinding Specialist, Institute for Human Centered Design

Ann Sussman AIA ........................................................T36Architect, Biometric ResearcherAnnsussman.com

Dana Swenson PE, MBA ........................................... T47Senior Vice President/Chief Facilities Officer UMass Memorial Health Care System

David Sykes MA ............................................................T11Chair, Acoustics Working Group and Acoustics Proposal Review CommitteeFacility Guidelines Institute

Jennifer Taranto LEED AP ID+C, BD+C, WELL AP .................................................................................................T21Director of Sustainability, Structure Tone, Inc.

Ellen Thorp CAE ......................................................... W44Associate Executive Director EPDM Roofing Association

John Tocci ......................................................................T10CEO, Tocci Building Corporation

Shane Trexler ...............................................................W16Energy Engineer, Kishimoto.Gordon.Dalaya PC

Kevin M. Tuohey CHPA ............................................W10Executive Director, Research Compliance Boston University and Boston Medical Center

Octavio Valdivia RA ................................................. W20Architectural Sales Representative Unicel Architectural

Paul Valenta LEED AP ..............................................W14VP of Sales & Marketing, CALMAC Corp.

Michael Van Hamel PhD, RA................................ W30Senior Design Architect, SMMA

Sarah Vaughan PE, LEED AP BD+C ....................T46Lead Mechanical Engineer Vanderweil Engineers

Neal Walsh ......................................................................T14Sr. Vice President, Aeroseal LLC

Don Walter AIA, NCARB ...........................................T38Principal, Dore & Whittier Architects

Kirsten Waltz AIA, LEED AP, ACHA, EDAC. LEED GA ............................................................................................... W27President, U.S. Operations Steffian Bradley Architects

Carl Weber .................................................................... W22Project Manager, Hampshire College

Mark T. Weiner AIA, CSI, IIDA .................... X10, Z31New England Architectural & Industrial Account Executive, The Sherwin-Williams Company

Sarah Welton............................................................... W38Senior Associate, Technical Programs and Support International, WELL Building Institute

Chris Widzinski ...........................................................W31Sustainable Design Engineer BR+A Consulting Engineers

Augusta Williams ........................................................T40Doctoral StudentHarvard T.H. Chan School of Public Health

Ron Winkle ................................................................... W40Board of Directors Roof Asset ManagementSPFA

Kathleen Woods ..........................................................T13Senior Healthcare Consultant, HDR

Paula Wright RN, BSN, CIC ....................................T20Project Manager, Infection Control Unit Massachusetts General Hospital

Harris Zeidman .......................................................... W26Lead Mechanical Engineer Vanderweil Engineers

Nationally Recognized Speakers

MED |ED FACILITIES 16

Why Register in Advance?March 20 is the advance registration deadline for the exhibit hall, all workshops, and other events. Why should you take advantage of that deadline?

you save money because it’s less expensive than registering on site

you won’t have to wait in line on-site to register (it really is a lot easier to register in advance)

you are guaranteed a seat in popular sessions that may sell out (seating is limited in all sessions)

you receive free admission to the exhibit area if you register in advance

To register before the March 20 discount deadline, use the registration form in this piece, call 800-996-3863 to register by phone, or register on our website at www.mededboston.com.

Questions? Call 800-996-3863 or visit www.mededboston.com

Directions and ParkingDirection information for MED|Ed Facilities at the Seaport World Trade Center may be found at www.seaportboston.com/Maps-and-Location.aspx and parking information at www.seaportbostonparking.com

AccessibilityMED|Ed Facilities and the Seaport World Trade Center are accessible for individuals with disabilities.

Public TransportationThe MBTA Silver Line Waterfront (SL1) provides service from the WTC Station to Logan International Airport terminals every 10 minutes during the weekday and every 15 minutes during the weekend. The Silver Line station is located adjacent to the hotel.

TaxiSeaport World Trade Center is about 3 miles from Logan Airport, one of several hotels near the Boston Convention Center and a quick ride away from all Boston attractions. Taxis are readily available from the lobby of our hotel.

Water TaxiThis scenic way to travel is a great way to avoid traffic. Hop on the water taxi shuttle at your terminal and enjoy the ride. The stop for pick up and drop off is at the Seaport World Trade Center, directly across the street from the Seaport Hotel.

HotelThe Seaport HotelLocated on Boston’s vibrant and historic waterfront, the Seaport Hotel is located directly across from the Seaport World Trade Center Boston. Just four minutes from Logan International Airport, the distinctive Seaport Hotel offers striking views of Boston Harbor and the city skyline. The special rate for MED|Ed Facilities attendees is $309 single occupancy. Call 1-877-SEAPORT (732-7678) before March 17 to make your reservations. Be sure to mention that you are with MED|Ed Facilities. To learn more about the Hotel, visit www.seaporthotel.com.

General Information

On-line until March 31After March 31 all registrations must be done on site. Register by March 20 to enjoy the discounted prices. Registrations may be made directly on the MED|Ed Facilities website at www.mededboston.com until March 31; after that date all registrations must be done on site.

Telephone until March 31After March 31 all registrations must be done onsite. Register by March 20 to enjoy the discounted prices. To register by telephone with a credit card call 800-996-3863.

Mail until March 31After March 31 all registrations must be done onsite. Register by March 20 to enjoy the discounted prices. Mail your payment and completed registration form to:

MED-ED Facilities 1645 Falmouth Road, Suite 1aCenterville, MA 02632

Fax with a credit card until March 31 After March 31 all registrations must be done onsite. Register by March 20 to enjoy the discounted prices. Fax your completed registration form to 508-790-4750. Please do not mail a duplicate registration.

MED-ED Facilities scholarshipsFull-tuition scholarships for MED|Ed Facilities workshops are available to young professionals. Call 800-996-3863 for details.

Free workshopsMED|Ed Facilities can be free or it can be inexpensive. To attend workshops free, email [email protected] or call 800-996-3863 and volunteer to work for a few hours at MED|Ed Facilities and, in exchange for your time, you will earn free admission to workshops.

Group discountsSeveral firms are registering as a group to receive additional discounts. Check with your office manager or call 800-996-3863 to see if your firm is registering as a group.

Free admission to exhibitsFor FREE admission to the exhibit area, complete the registration form by March 20 and check EXHIBITS ONLY on that form…or register for any MED|Ed Facilities event and you automatically receive free admission to the exhibit hall.

Confirmation of registrationConference badges will not be mailed prior to the event. Please be sure to keep a copy of your email confirmation when you register and bring it with you onsite.

On-site registrationTuesday, April 4 through Wednesday, April 5 opens at 7:00 am

Refund policyAll conference cancellations and refund requests must be made in writing and e-mailed to [email protected]. Requests for refunds will be honored through March 3, 2017 5pm Eastern Time. There will be a $50.00 service charge for cancellations requested prior to March 3, 2017, 5pm Eastern Time. Requests should be sent in writing via email to the conference registrar. Refunds will not be issued after March 3, 2017, however you may request a credit for the following year’s event by emailing [email protected]. There are no refunds for no-shows. Please note that discounts are not retroactive for previously registered attendees. Requests for substitutions or exchanges will be permitted when both registrants are employed by the same organization and the payment has been made by company check, company credit card or wire transfer. Requests must be made in writing email by the original registrant to the conference registrar. Badges are non-transferable without prior written consent of the registrar; therefore sharing of a badge is prohibited.

WAYS TO REGISTER

AIA/CEUsAttendees earn one (1) AIA Learning Unit for each workshop hour (e.g., 1.5 LUs for a 90-minute workshop). In addition, to meet credit requirements for Health, Safety and Welfare (HSW) look for those workshops with the HSW notation on-line.

To track continuing-education credits, AIA members must include their membership number when registering. If you are not an AIA member, please email your request for a certificate of attendance to [email protected].

Massachusetts registered architects must earn a minimum of 12 credits annually, including 8 credits on Health, Safety and Welfare (HSW) topics. AIA architects must earn a minimum of 18 credits annually, including 12 HSW topics.

Benefits of Attending:• Hear industry experts share advice and insights into topics that

benefit your business• Discover the latest in products and services in he Exhibit Hall• Raise your visibility• A great opportunity to earn LUs, network, and be inspired• Enjoy a free lunch• Take the pulse of what is happening• Learn about new practice strategies• Stay current with regulations, trends, codes, and technologies• Build your knowledge base and expand your resources• Establish and maintain relationships that lead to expertise, advice,

and insights

Earn continuing-education credit, AIA Learning Units for all workshops.

Networking opportunitiesMED|Ed Facilities offers you the opportunity to network with current and prospective clients, colleagues, schoolmates and friends at workshops, in the exhibit area, and in lounges throughout the hotel. Invite your clients to join you for workshops and show them exhibits that might enrich their projects.

Design your own scheduleYou could easily fill both days with activities at MED|Ed Facilities…but you don’t have to. The schedule is designed to accommodate individual time commitments. A half-day at MED|ED Facilities may include a morning of workshops, lunch with a client and time on the exhibit floor. A day-trip might include a few workshops, a visit to the exhibit hall, a late afternoon cocktail reception, and a quick trip home. Out-of-towners might wake up at the Seaport Hotel (just four minutes from Logan International Airport) and stroll along the waterfront, and then attend workshops and browse the exhibit floor.

Exhibit Area HoursTuesday, April 4 Wednesday, April 5 11:30am-6:30pm 11:30am-2:00pm

Lunch included when registering for the one or two day conference pass, plus drink tickets for the Tuesday night reception.

Networking ReceptionTuesday, April 4 5:30-6:30 PM Sponsored by:

Network with building industry leaders from New England in a casual setting. Join speakers, firm principals, consultants and others from leading firms who are working on educational and healthcare facilities. The Networking Reception held on the show floor so everyone can mingle in a relaxed environment. The reception features light snacks and bars located in the exhibit space.

Seaport HotelThe Seaport Hotel is the accommodation of choice for all event attendees.

Hotels in Boston typically sell out quickly in the spring. The discounted rate for MED|Ed Facilities Boston is $309 (single/double) plus tax. This rate is available on a first-come, first-served, space available basis and has been extended until Tuesday, March 17, 2017. Please book your room soon to take advantage of these savings!

To book your room call 1-877-SEAPORT (732-7678) to book your room and you must mention MED|Ed Facilities Boston to receive the discount rate

17 MED |ED FACILITIES

2017 REGISTRATION FORM Please print legibly. Submit a separate form for reach person registering.

First name

Last name AIA, CSI, P.E., Etc

Title

Company

Street

City State Zip

Phone

Email

AIA member number if applicable

1. Your title/Function CEO/President Principal/Director/VP Project Manager Project Architect Interior Designer Business Manager/Controller Designer Facility Manager Specifier Student Other _________________

2. Firm Type Architecture Educational A/E or E/A Healthcare Building Products Building Services Landscape Architecture Interior Design/Space Planning Specifying/Cost Estimating Planning/Urban Design Facility Management General Contractor Government Real Estate Development Academia/Educational

Institution Marketing/PR Finance Other _________________

3. Number of Employees 1-10 11-25 26-50 More than 51

4. Specifying Role Make Final Decision Recommend No Role

5. Firms Work Medical Office Building Hospital Commercial Government Nursing Home University/Schools Other _________________

6. I am a Member of AIA ABC ACEC AGC ASHRAE ASID BOMA BSA BSLA CSI NESEA NEWIRE USGBC None Other _________________

March 20 Early Bird/Late1. Admission to Exhibit Hall Exhibit Hall $0

2. Individual Workshops $65/$80 Includes 1 Drink Ticket for Networking Reception Tuesday 8:00 am T10 T11 T12 T13 T14 T15 T16 T17 T18 10:00 am T20 T21 T22 T23 T24 T25 T26 T27 T28 2:00 pm T30 T31 T32 T33 T34 T35 T36 T37 T38 4:00 pm T40 T41 T42 T43 T44 T45 T46 T47 T48 Wednesday 8:00 am W10 W11 W12 W13 W14 W15 W16 W17 W18 10:00 am W20 W21 W22 W23 W24 W25 W26 W27 W28 2:00 pm W30 W31 W32 W33 W34 W35 W36 W37 W38 4:00 pm W41 W42 W43 W44 W45 W46 W47 W48

3. 2-Day Package April 4th & 5th $525/$575 Includes 2 Lunches & 2 Drink Tickets

4. Tuesday Day Pass April 4th $275/$300 Includes Lunch & 2 Drink Tickets

5. Wednesday Day Pass April 5th $275/$300 Includes Lunch & 2 Drink Tickets

6. Networking Reception April 4th, Tuesday 5:30 - 6:30 Free

7. Complimentary Sessions W40 X10 Z30

Payment MED-Ed reserves the right to adjust any total charges due to form errors.

Total Cost (Sums of 1 through 7) $ __________________

Promotional Code ______________ $ __________________

Total Amount Due $ __________________

Payment type: Cash Check

Select type of Card: Amex Visa MasterCard Discover

Credit Card Number

Credit Card Expiration Date Security Code

Name exactly as printed on card

Fax: 508-790-4750Mail: MED|Ed Facilities

1645 Falmouth Road, Suite 1A Centerville, MA 02632

On-line: www.mededfacilities.comEmail: [email protected]

The Healthcare and Educational Facilities Design and Construction Event for New England

FOURTH ANNUAL

The Premier Healthcare and Educational Facilities Conference in New England.Conference and Exhibits: April 4+5, 2017Boston, Massachusetts | www.mededboston.com Register early, seating is limited! Call 1-800-996-3863

CEO/PresidentPrincipal/Director/VPProject ManagerFirm AdministratorsLandscape ArchitectsInterior DesignerBusiness Manager/ControllerDesigners

Project ManagersPublic Agency ProfessionalsReal Estate ProfessionalsSpace PlannersSpecifiersSubcontractorsUrban DesignersYoung Professionals

Workshop discounts and free admission to the exhibit hall if you register by March 20, 2017

1645 Falmouth Road, Suite 1A Centerville, MA 02632

For everyone who designs, constructs owns or operates schools, universities and any type of healthcare facilities

Route to:

Architects Earn your continuing education and AIA/CES Learning Units (LUs) in two days

Educational Partners: