2
THE 1 ST MONITORING TECHNOLOGY FOR CONTROL OF ACTIVE BIOMASS IN REAL TIME - Improve treatment efficiency on viable and cultivable or not cultivable micro organisms - Optimize biocide dosing programs - Validate treatment and its frequence - Eliminate pathogenic organisms - Improve potable water quality - Optimize reclaimed water treatment - Control of disinfection process - Protect public health - Improve process stability - Optimize biomass health - Monitor raw wastewater toxicity - Reduce operating costs COOLING WATER AND SANITARY WATER NETWORKS POTABLE WATER AND PROCESS WATER BIOLOGICAL WASTEWATER TREATMENT All this is now possible with LuminUltra’s 2 nd Generation ATP Measurement Technology! Through two test formats, Quench-Gone™ and Total Control™, virtually any water or wastewater sample can be analyzed for active microbial content in real-time. This is done by measuring ATP (Adenosine Triphosphate), a molecule involved in cellular metabolism that is found in all living organisms. Measuring ATP provides a direct, interference-free indication of living micro organisms within minutes of sample collection! How can ATP testing help ? LuminUltra™ is the first and only supplier of ATP test kits designed for the measurement of living microorganisms in ALL water applications. Microbial growth control is essential in any water process, from potable water to waste water. Our product line has been specially developed to fit this need for control. The following descriptions will help you to determine which kit is appropriate for your application Using & Product Line The LuminUltra Test kits can be the first line of defense in a HACCP-based water safety and maintenance strategy for any water system. In conjuction with other routinely collected data, ATP results can become an invaluable component of a continuous improvement program and is an excellent compliment to current monitoring practices, including biocide residual measurements and culture tests. Use LuminUltra’s products for : Drinking water monitoring and maintenance Recreational water screening Sewage treatment plant stabilization and optimization Reduced health risks in cooling and heating systems Irrigation water protection Improved environmental compliance LumiCapture™ Software automatically records, calculates, archives and trends results from Quench-Gone and Total Control. - in concentration of ATP (picogramms) - in microbial equivalents.

THE 1 ST MONITORING TECHNOLOGY CONTROL OF ... - AQUA … · THE 1ST MONITORING TECHNOLOGY FOR CONTROL OF ACTIVE BIOMASS IN REAL TIME - Improve treatment effi ciency on viable and

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: THE 1 ST MONITORING TECHNOLOGY CONTROL OF ... - AQUA … · THE 1ST MONITORING TECHNOLOGY FOR CONTROL OF ACTIVE BIOMASS IN REAL TIME - Improve treatment effi ciency on viable and

THE 1ST MONITORING TECHNOLOGY FOR CONTROL OF ACTIVE BIOMASS IN REAL TIME

- Improve treatment effi ciency on viable and cultivable or not cultivable micro organisms

- Optimize biocide dosing programs- Validate treatment and its frequence- Eliminate pathogenic organisms

- Improve potable water quality- Optimize reclaimed water treatment- Control of disinfection process- Protect public health

- Improve process stability- Optimize biomass health- Monitor raw wastewater toxicity- Reduce operating costs

COOLING WATERAND SANITARY WATER NETWORKS

POTABLE WATER AND PROCESS WATER

BIOLOGICAL WASTEWATER TREATMENT

All this is now possible with LuminUltra’s 2nd Generation ATP Measurement Technology! Through two test formats, Quench-Gone™ and Total Control™, virtually any water or wastewater sample can be analyzed for active microbial content in real-time. This is done by measuring ATP (Adenosine Triphosphate), a molecule involved in cellular metabolism that is found in all living organisms. Measuring ATP provides a direct, interference-free indication of living micro organisms within minutes of sample collection!

How can ATP testing help ?LuminUltra™ is the first and onlysupplier of ATP test kits designedfor the measurement of living microorganisms in ALL water applications.Microbial growth control is essential in any water process, from potable water to waste water. Our product line has been specially developed to fit this need for control.The following descriptions will help you to determine which kit is appropriate for your application

Using &Product Line

The LuminUltra Test kits can be the fi rst line of defense in a HACCP-based water safety and maintenance strategy for any water system. In conjuction with other routinely collected data, ATP results can become an invaluable component of a continuous improvement program and is an excellent compliment to current monitoring practices, including biocide residual measurements and culture tests. Use LuminUltra’s products for :• Drinking water monitoring and maintenance• Recreational water screening• Sewage treatment plant stabilization and optimization• Reduced health risks in cooling and heating systems• Irrigation water protection• Improved environmental compliance

LumiCapture™ Software automatically records, calculates, archives and trends results from Quench-Gone and Total Control.- in concentration of ATP (picogramms)- in microbial equivalents.

Page 2: THE 1 ST MONITORING TECHNOLOGY CONTROL OF ... - AQUA … · THE 1ST MONITORING TECHNOLOGY FOR CONTROL OF ACTIVE BIOMASS IN REAL TIME - Improve treatment effi ciency on viable and

Aqua-tools26, rue Charles Edouard Jeanneret78300 Poissy - France Tel : + 33 (0) 1 39 75 02 20Fax : + 33 (0) 1 39 75 08 [email protected]

1. FILTRATION 2. EXTRACTION 3. RÉSULTAT

1. EXTRACTION 2. DILUTION 3. RÉSULTAT

USE : In conjuction with other routinely collected data, ATP results can become a valuable component of maintenance programs. Total Control provides a real-time measure of total active biomass concentration and health. Through two simple analyses, Total Control provides the following valuable information:• cATP™ : (Cellular ATP) – concentration of living biomass• BSI™ : (Biomass Stress Index) – health of the biomass• ABR™ : (Active Biomass Ratio) – biosolids activity

USE : For “Clean” water and water of Public network : Quench-Gone Aqueous.Quench Gone provides the fi rst line of defense in a multi-barrier operational monitoring program for raw water treatment and distribution, including :• Evaluation of raw water quality and prevent raw water treatment equipment fouling or corrosion• Monitoring and control microbiological re-growth in treated water distribution• Reduce health risks in cooling systems through assessment of Methodical Risk Analysis• Ensuring drinking water qualitySee our application overview

For wastewater and wastewater treatment : Total control BWWT (TCB™). Pulp and paper manufacturing facilities must use biological treatment for their effl uent prior to discharge. As such, it is imperative to ensure that process biomass operate effectively. Total control can be used for :

• Optimize aeration & nutrient feed systems• Maximize biomass viability• Prevent process upsets• Monitor wastewater toxicity...and more!

réal

isat

ion

: lau

rent

.dup

uis@

esta

mpe

s.co

m

NATURAL WATERULTRAPURE WATERSANITARY WATERCOOLING TOWER WATERFIRE WATERRECYCLE WATER

PROCESS WATERCOOLING TOWER WATERACTIVE MUDSAEROBIC / ANAEROBIC BIOREACTORS