TEST REPORT 131525 / 1 KRONO SYSTEM S.R.L

TEST REPORT

131525 / 1Date received: 28/07/11Date of test: 30/08/11Date of issue: 07/09/11Sample name: FACESTONE treated against stains.

Surface resistance to cold liquids EN 12720:2009

KRONO SYSTEM S.R.L.!VIA SALI 25!31040 MANSUE' (TV)!ITALIA

CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.

centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti

Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: [email protected]

Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: [email protected]

Staining agents16 h

Contact time

10 min 10 sec

Evaluations:

not necessary

///

Acetic acid (sol. 10%)1 h

2 2 4 -Acetone 2 - - 5Ammonia (sol. 10%) 2 2 2 - /

Red wine 2 2 2 - - not required by theCitric acid (sol. 10%) 2 3 5 - UNI 10944 standard

5 = no changeCleansing agent 5 / - -Coffee 2 2 - - 4 = minor changeDisinfectant 2 5 5 - (only visible under reflected light)

Endorsing ink 2 - - - 3 = moderate changeEthanol (sol. 48 %) 2 2 4 - (visible from several viewing directions)

Ethyl-butyl acetate (1:1) 5 - - / 2 = significant change in colour or gloss,Olive oil 2 2 2 - slight change of structure

Paraffin oil 2 4 - - 1= strong change Sodium carbonate (sol. 10%) 2 3 - -

CLASSIFICATION NOT COVERED!BY ACCREDITATION:

Sodium chloride (sol. 15%) 2 4 - -Tea 5 / - -Water 2 3 - -Beer 5 / / -Notes:- Chemical analysis of the tested material has not been carried out. Rating Class according- The staining agents and the contact time are according to UNI 10944:2001 standard. to UNI 10944

pag. 1/1

The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.

This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.

Managing Director Dr. Andrea Giavon

TEST REPORT

147794 / 1Date received: 05/10/12Date of test: 09/10/12Date of issue: 17/10/12Sample name: Facestone panel on compact phenolic laminate.

Cold-check test PTP Catas






Procedure:

Remarks

The test has been carried out putting the sample in a forced ventilation climatic chamber,!at the following conditions:4 hours at 50 ± 3 °C

4 hours at -20 ± 3 °C

Test results:

N. of cycles

15 no defects after 15 cycles

Note:!the test method is partially according to UNI 9429:1989.

pag. 1/1




TEST REPORT

147794 / 2Date received: 05/10/12Date of test: 15/10/12Date of issue: 24/10/12Sample name: Facestone panel on compact phenolic laminate.

Tensile strength in flatwise plane ASTM C 297:1999






Specimen shape:

Width!mm

rectangular

Maximum load!N

Tensile strength!N/mm2

#error : Incompatible kinds.#error : Incorrect formula.0,0289 0 0

Specimen thickness: 3,15 mmTest equipment: Instron dynamometer mod. 5500R Test speed: 0,3 mm/minConditioning: 23 ± 2 °C and 50 ± 5% r.h.Test temperature: 20±5°C

Test results:

Length!mm

Specimen!n°

1 50 50 1.572 0,631 50 50 2.524 1,01

#error : Incompatible kinds.#error : Incorrect formula.0,1024 0 0

1 50 50 2.044 0,821 50 50 2.270 0,912 50 50 2.789 1,12

3 50 50 1.971 0,79 #error : Incompatible kinds.#error : Incorrect formula.0,0001 0 04 50 50 1.197 0,48 #error : Incompatible kinds.#error : Incorrect formula.0,1024 0 05 50 50 1.521 0,61 #error : Incompatible kinds.#error : Incorrect formula.0,0361 0 0

Average value

Remarks: For all specimens the superficial delamination of outer layer have been noticed.

0,80 0 0 0,2699 0 0Standard deviation 0,22

pag. 1/1




Documents

TEST REPORT 131525 / 1 KRONO SYSTEM S.R.L