Tender No.418/2017

SPECIAL INSTRUCTIONS

No Cutting erasing is allowed in the Tender bid.

Bid offered strictly in accordance with the bid document will only be accepted.

Only typed bid will be accepted (no hand written)

Bid Security will be accepted in the form of CDR (Call Deposit Receipt)

THIS IS FOR STRICT COMPLIANCE, FAILING WHICH THE RESPECTIVE BID SHALL STAND CANCELLED

Contact Address:

Incharge Purchase Cell

University of Veterinary and Animal Sciences,

Sheikh Abdul Qadir Jelani (Outfall Road) Lahore

Tel: 042-99211449, Ext:138

Tel:042-99213650

TERMS & CONDITIONS

The price of this tender documents is Rs.1500/- (Non Refundable)

1. The Tender complete in all respect along with 2% Bid Security of Estimated Price / Cost in the

shape of “Call Deposit Receipt” (CDR) in favor of “Treasurer, UVAS”, Lahore should reach in

Purchase Cell by 20-12-2017 at 11:00 a.m in the University of Veterinary & Animal Sciences,

Lahore.

Lot

No.

Description Bid Security (Rs)

01 Video Endo Scope 120,000/-

02 Video Compact System Otoscopy for Animals 125,000/-

03 X-Ray Units with Accessories 120,000/-

04 Radiography Machines 120,000/-

05 Floresent Microscope 150,000/-

06 Real Time PCR with newest software 80,000/-

07 Elisa Reader & Washer 140,000/-

08 Centrifuge Machines 80,000/-

2. The quotations will be opened on 20-12-2017 at 11:30 a.m. in the meeting Room,

Department of Business School Management (FLSBM), UVAS, Lahore. 3. The offered price should be inclusive of all taxes.

4. The rate must be quoted only DDP (Delivered Duty Paid) and C & F basis.

5. Quoted rates must be valid for 90 days.

6. No offer shall be considered if it is:

a) Submitted without Tender Document

b) Submitted without Bid Security money.

c) Received after the date and time fixed for the receipt of tenders.

d) Is unsigned

e) Is ambiguous

f) Is conditional

g) Is given by the firm black listed, suspended or removed from the approved list by

any Government, Semi Government, Auto``nomous Bodies or other firm.

h) Is received by Telegram.

i) Is received with a validity period shorter than the required in the tender enquiry.

j) Does not confirm to general conditions of the enquiry i.e it is not accompanied by

sample or manufacturers literature where required.

k) Is for store materially and substantially different from that required in the tender

enquiry.

7. In case of warranty 10% amount as security will be deducted from the bills of the firms at

the time of payment and be released as per purchase rules 2005 of the UVAS.

8. The sample may be provided as & when required by Technical Committee.

9. Applicable Govt. levies will be deducted at source from the bill.

10. The quantity of the items may be increased/decreased as per availability of funds.

11. The equipment / stores supplied by the bidder shall be brand new, in original manufacturer

packing and complete in all respects. Cost of transportation of supplied equipment / goods

to the site of University and cost of installation and commissioning of equipment shall be

the responsibility of the supplier.

12. Supply of material should be made within stipulated period of the Purchase Order

positively; in case of failure the amount of CDR may forfeited and purchase will be made

at the risk and cost of the defaulter or any penalty as per Purchase Rules, 2005 of the

University can also be imposed.

13. The buyer shall notify the supplier in writing/through telephone of any defects that occur

during the warranty period. On receipt of such notification/telephonic message the

supplier shall attend the breakdown call within a maximum of 6 working hours.

14. The firm offering prices for supply of machinery and equipment should have sufficient

qualified technical staff and be equipped and having capability to undertake the

maintenance or replacement for the equipments supplied to this University.

15. The bidding documents should be dropped in Tender Box in the office of the Purchase

Cell, Room No. 108, 1st Floor, UVAS, Lahore, during five working days till the last date

mentioned in tender notice.

16. Bids must be quoted on company’s letter pad duly signed stamped by the bidder

17. Please attached NTN, GST and professional tax certificates with bidding documents.

18. Please attached the copy of your FBR Active taxpayer serial Number list for the current

financial year.

19. Please read, sign all the tender documents, terms and conditions carefully and attached

with your bidding documents.

20. Any further information if required can be obtained from Purchase Cell, UVAS, Lahore

We, M/s. ____________________________ hereby certify that we have read and

agreed with all terms and conditions mentioned above.

Signature: ________________________________

Designation: ________________________________

Dated: ________________________________

Stamp: ________________________________

INCHARGE PURCHASE CELL

ESTABLISHMENT OF UNIVERSITY OF VETERINARY & ANIMAL SCIENCES AT BAHAWALPUR

Terms & Conditions

Please follow under mentioned terms strictly:

Please fill up profromae instead of putting your own specification

Please Tick any one origin, where applicable.

Please quote rates in C&F & DDP basis, both rates are mandatory.

One can mark additional features in concise way in Last Column, or can attach supporting brochures. CDs or online links which are helpful for product details may be attached or provided.

Bidder must be a distributor of quoted product

Bidder must have in house Authorized Service Center

Lot No.01 S.NO Article Qty Specification Origin Brand/

Model DDP Price

C&F Price

Remarks

1 Video Endoscope

1 Video Endoscope for Animals Video-Tower Video cart, Completely mounted, basic version, Power bar integrated, Drawer inbuilt, Fixation knob for video camera head, Specially rust protected HD endoscopic camera 1/ 3” incl. LED Light, 1980 x 1024pxs, 22mm DIN, Camera head, fully immersible, 3m cable, Incl. driver software, Outlets: USB 3.0 (incl. power supply), Mini socket for LED light Monitor Apple, 22”, high definition With capture device & Network connection, HDMI, FBas, video card, keyboard, 115-230VAC, transformer Receiver, 5, 8GHz for Apple & Windows PC’s incl. grabber and basic software LED light source, high power, 100 W,

EU/USA/Japan

65000° K, built-in air pimp, Light connector comp. to Olympus flex.115-240VAC, 50/60Hz Fiber Dignt Cable 4.8mm and 3m. Gastroscopes for Animal LED video gastroscope, 320cm, wireless set 10 mm, in-built video camera with LED’s, f.horses & large animals, small versio 4-way deflecting, working channel: 2,8mm Full screen technology, fully immersible **in-built 5, 8 GHz sender and accu For wireless video transmission and Power supply Including:

- Charger 115-240VAC/50/60Hz - Density tester - Cleaning brush - Cleaning adaptors - Transportation case - Biopsy forceps, 360cm - 250ml water bottle and

Air/water double tube - TV receiver (TXL1-583)

Receiver 5,8GHz, for Android tablets & Smartphone’s for 97/TX/TD/TX series Gastro washer with cleaning pump with timer for flexible endoscope and tubes Endoscope dryer, instrument and endoscope washer, enzymatic cleaning solution 1 liter, disinfection solution 1 liter, alkyne cleaning powder

Laparoscopy for Animal Wide angle telescope, OD: 10mm, 30°, WL: 50cm, large image optional system Stand. Light connectors, autoclavable For enquire and large animal practice

Wide angle telescope, OD: 10mm, 0° WL: 50cm, large image optical system Stand. Light connectors, autoclavable, For equine and large animal practice Fibre light cable, 4, 8mm, 3m; O/W, Unit side comp. to Olympus, endoscope Side comp. to Dr. Fritz & R.Wolf, Autoclavable Cannula only, magnetic valve: 5,5mm, WL: 20cm, inflation stopcock Safety trocar only comp. to cannulas ID: 5,5mm, WL: 20cm, fully dismantable With cork screw handles Cannula only, magnetic valve: 10mm, WL: 20cm, inflation stopcock Safety trocar only comp. to cannulas ID: 10mm, WL: 20 cm, fully dismantable With cork screw handles Cannula only, magnetic valve, ID: 13mm, WL: 15cm, stopcock, TRINOX Trocar only with pyramidal tip for Trocars cannula with ID: 13mm, 15cm, Working trocar acc.to Dr. Marien, ID: 23mm WL: 16cm, without valve, incl. cannula (TR-250) and sharp trocar only (TR-23) Reducer adapter for trocars Cannulas with ID: 10 to 5, 5mm Reducer adapter for trocars From 13mm to 5mm

Snap reducer adapter for trocars From 13mm to 10mm Injection system and probe, 5mm, 47cm Protected interchangeable needle With outer tube, complete, consisting of L-47 inside tube, LL (f) connector L-47-2 outer tube/probe L-210 needle, 1 pc (1x26mm) Retractor arm, straight, 5mm, 35cm Pear shaped, autoclavable Puncture and irrigation needle, ID: 3mm WL: 20cm, incl. sharp trocar **10mm- Instruments** Dissecting forceps, (Maryland), turned, 10mm, 45cm, insulated, dismantable, compl Rotable, consisting of: Jaws insert (13 M 48); sheath (13 R 1) Handle (H 01) color code: black

Lot No.02

2. Video Compact system Otoscopy for Animals

1 Video Compact System, USB2, SET For universal use in small animals, pets, With video still image capture device LED light integrated, 3m single cable Consisting of:

Basic unit

USB stick with basic software

Otoscope With 6 sheaths, color coded

Camera head holder

antifog, cleaning brush,

Grasping forceps, ear curette

Inflation pump for dental and gyn

Stainless steel rack with silicon hoses

EU/USA/Japan

Lot No.03

3. X Ray Unit with Accessories

1 High-Frequency X-Ray Generator Max. output 2.4 kW @ 80 kV Output 100 kV / 35 mA kV range 40 - 100 kV (1 kV steps) mAs range 0.4 - 100 mAs (25 steps) Current output range 35 mA @ 40 - 50 kV / 0.4 - 100 mAs 30 mA @ 51 - 70 kV / 0.4 - 64 mAs 25 mA @ 61 - 70 kV / 80 - 100 mAs 30 mA @ 71 - 80 kV / 0.4 - 32 mAs 25 mA @ 71 - 80 kV / 40 - 80 mAs 25 mA @ 81 - 90 kV / 0.4 - 40 mAs 20 mA @ 81 - 90 kV / 50 - 80 mAs 20 mA @ 91- 100 kV / 0.4 - 50 mAs 16 mA @ 91 - 100 kV / 64 - 80 mAs Tube type Toshiba D-124 Focal spot 1.2 mm x 1.2 mm HU capacity 20 kHU Cooling rate 250 HU/s Collimator lamp LED Collimator auto timer 30 s SID scale length 2 m Laser pointer Integrated dual laser Power input 110 / 220 VAC Power frequency 50 / 60 Hz, single phase PROM memory 8 APR Dimensions (L x W x H) 335 mm x 250 mm x 195 mm (12.8" x 9.8" x 7.7") Weight 12.8 kg (28.2 lbs) Included accessories Aluminum transport case Detector Detection method Indirect conversion, a-Si TFT Scintillator CsI Dimensions (W x H x D) 460 mm x 384 mm x 15.2 mm (18.1“ x 15.1“ x 0.6“) Weight 3.7 kg (8.2 lbs)

EU/USA/Japan

Pixel matrix 2,304 x 2,800 pixel Pixel pitch 150 μm Active area 35 cm x 42 cm (14" x 17") A/D conversion 14 bits Spatial resolution min. 4.0 lp/mm Image transfer time 5 s Power consumption max. 12 W Synchronisation AED (Automatic Exposure Detection) / external trigger Housing material Magnesium aluminum alloy Weight limit Local load: 100 kg at Ø 40 mm Uniform load: 100 kg at effective image area overall Enviromental conditions Operating Temperature: 5 °C to 40 °C (41 °F to 104 °F) Humidity: 20 % to 85 % (non-condensing) Atmospheric pressure: 700 hPa to 1060 hPa Transport / Storage Temperature: -20 °C to 55 °C (-4 °F to 131 °F) Humidity: 5 % to 95 % (non-condensing) Atmospheric pressure: 700 hPa to 1060 hPa Battery Type: Lithium Polymer Charging time: 2 hours Working time (with one battery): 4 hours @ 200 images Life: min. 1000 charging cycles Regulatory requirements and standards CE 2460 Capture console, consisting of X-HW More Acquisition Notebook, X-AQS PACS software (controls detector, image acquisition and optimization), X-AQS Module Horsemode, X-AQS Module Dropbox Cloud Transport Solution High-tech carrying case Dimensions (L x W x D): 590 mm x 525 mm x 225 mm (23.2“ x 20.7“ x 8.9“) Total weight (fully equipped): < 18 kg (40 lbs) Material: Lightweight strong HPX@ Resin, watertight, dustproof Feature equipment Battery charger for detector

with 2 batteries Cowboy box for detector and distance holder starter kit and backup solution X-ray Table Professional Table dimensions: 170 x 60 cm Working height: 75 cm Installation dimensions: 170 x 73 cm Column height: 160 - 190 cm, depending on the X-ray system Alu x-ray table system with longitudinal movable casstte tray Satisfying your highest demands in positioning flexibility, stability and safty ALU components form a modern looking, lightweight, rust free and most robust design Large 170x 60 cm table top smooth surface, with a High-Tec x-ray translucent table top Reducing radiation exposure and protecting the x-ray tube long-live X-ray column and cassette tray are firmly secured in one moving part. Column and tray are smoothly and easily movable over the entire table length, allowing x-raying of various body regions, without need for animal repositi-oning X-ray cassettes can be easily inserted in the self-centering cassette tray, both in longitudinal and transverse axis.

An anti-scatter grid can be permanently installed under the table top High flexibility for mobile X-ray units up to a weight of 20 kg. Entry version: fixed tube FFD height. Suitable for digital and classic radiography.

Lot No.04

4. Radiography Machine

1 High frequency X-ray device with builtin touch screenOutput power: 32 kW / max. 450 mA Voltage range: 40 – 125 kV (optional 40 – 99 kV) Current range: 25 – 450 mAs Switching time: 0.001s – 2.5 s Mains connection: 230 V – 50 / 60 Hz 1-phase (wall plug) Capacitor technology: 2.8 kW input, 32 kW output Programs: 352 pre-programmed anatomical stations Foot release switch: 2-stage Table top: Floating two movements Table height: 78 cm Table top surface: 160 cm x 75 cm (63“ x 29.5“), offset ± 35 cm (13.8“) Tube X-ray tube with rotary anode, dual focus 0.6 / 1.3 mm Collimator Manual rotation, halogen lamp, timer Detector X-DR XL wired, 17“ x 17“, CsI

EU/USA/Japan

Lot No.05

5 Florescent Microscope

3 Optical system. Infinity Corrected Objectives: Plan Semi Apoachromat objective 4X, 10X, 20X, 40X, 100X (Oil Immersion). Trinocular observation tube. Coded fluorescence illumination with fly eye lens Fluorescence mirror unit turret 8 position..

EU/USA/Japan

100W mercury light source . Quintuple Coded nose piece. Bright- field condenser. Mechanical Stage. Coaxial course fine focusing. Mirror unit for fluorescence microscopy (Blue, Red and Green) Microscope digital camera 2CCD Monochrome/colour Quantum efficiency 55% or more Paltier cooling sstem, progressive scaning mode. Binning 2/2, 4/4 Frame rate 15fps to 57fps or more 1 XLEDs 50", online sinewave UPS 1 KVA with battery backup (1 hour), USA/ Euorope/ Japan

Lot No.06

6 Real-Time PCR System with newest software

6 Fast Real-Time PCR System offers maximum performance in the minimum time. Fully optimized for Fast cycling, Fast delivers high quality results in as little as 30 minutes.• Specially designed Fast block ensures thermal uniformity at top speeds.• Faster ramp rates enable rapid results without compromising extension times or assay quality.• Fast optical plates ensure excellent precision in 10-30 ul reaction volumes.• Finish more runs per day with the excellent performance.• Shortens analysis time by auto-calling genotypes and automatically mitting the no template controls• Minimizes subjective analysis by automatically grouping unknown variant clusters • No temperature shift required – distinguish between homozygous mutants and wild type more easily Allows easy data review with customizable multi-plot views, expandable windows and one-click color assignment to highlight curves of interest Facilitates data presentation with the option to export data and graphs directly to PowerPoint or as JPEG files Specifications Calibrated Dye:Cy3, Cy5, FAM, JOE, NED, ROX, SYBR Green, TAMRA, Texas Red, VIC Capacity: 1 x 96-well plate (Fast), 12 x 8-tube strips

Germany/USA/Japan or equivalent

Dynamic Range:9 logs of linear dynamic range Format: 8-well strips, 96-well plate Optics: CCD Camera, Six excitation and Six emission filters, Halogen light source Peak Block Ramp Rate: 5.5°C�sec Precision: Distinguish between 5,000–10,000 genome equivalents (two-fold copy number difference) with 99.7% confidence Reaction Volume Range: 10-30 μl Run Time: <2 hrs (Standard), 36 min (Fast) Temperature Accuracy: ±0.5°C Temperature Range (Metric):4.0-99.9 °C Temperature Uniformity: ±1°C Thermal Cycling System: Peltier-Based and/or preferably OptiFlex System Throughput: 4 to 5 96-well plates per day Must be supplied with Servo Stabilizer. 02 Years comprehensive warranty for repair/service Complete installation of this apparatus is responsibility of supplier

Lot No.07

7 Elisa Reader & Washer

7 A) ELISA Reader Wavelengths 340 - 750 nm, Resolution 0.001 OD, single and dual mode readings, complete doodle/software for data analysis, computer interface enabled. Electrical requirements 110/220 VAC, 50–60 Hz Technical Specifications S# Functions Technical detail 1 Wavelength selection Filters 2 Wavelength range 400 – 750 nm 3 Filters 8-position filter wheel Standard filters 405 nm, 450, 570 and nm 4 Read-out range 0 – 3.5 Abs 5 Linearity 0 – 2 Abs, ± 2.0% at 405 nm 6 Accuracy ± 2.0% or ± 0.007 Abs whichever is greater, typical value ±1% (0 – 2.0 Abs) at 405 nm 7 Precision CV ≤ 0.5% (0.3 – 1.5 Abs) at 405 nm CV ≤ 1.0% (1.5405 nm 8 Resolution 0.001 Abs 9 Plate types 96-well plate 10 Measurement speed 5 s, 96-well plate Continues reading and stepwise reading options 1 Light source Quartz tungsten halogen lamp 12 Detector Eight (8) silicon photo detectors 13 Shaking Linear shaking, 3 speeds 14 User interface

EU/USA/Japan

On-board and PC control with director printer option 15 Standard CE APPROVED 16 Manuals Installation, Operational manual, services manual 17 Warranty Three years warranty from the date of installation and demonstration B) ELISA WASHER Compatible with 96-well micro-plate that have flat-, U, or V-bottom wells, Up to 75 programmable washing sequences, Wash volume 50-300 μl per well. Precision +5% RSD (0.9% NaCl W/v). Removable and autoclave able plate carrier and tubings. Electrical requirements 110/220 VAC, 50–60 Hz Technical Specifications Feature Technical details Number of wash buffer bottles Up to 3 Bottles 2 l wash bottle, 2 l waste bottle Wash heads 1 x 8 or 1 x 12 wash head for 96-well plate supplied Plate types 96-well plates Wash volume 50-1000 μl Prime volume/ Rinsing Volume 5-100 ml Dispensing volume 50-400 μl (96-well plate) Residual volume < 2 μl Control Completely computerizing control with manual operation option Standard CE APPROVED Manuals Installation, Operational manual, services manual Warranty Three years warranty from the date of installation and demonstration Power supply 110/220 VAC, 50–60 Hz Power backup Supplied with UPS with at least 30 minutes backup

Lot No.08

8. Centrifuge machine

10 Max. rotor capacity: 18 × 0.2-750 mL vessels Max. speed: 16,873 × g (14,000 rpm) Small footprint and low access height of 23 cm. Temperature range from 0 °C to +40 °C . Guaranteed temperature of 4 °C at maximum rotational speed. function for quick pre-cooling and maximum temperature accuracy inside the rotor. ECO power shut-off engages after 8 hours of nonuse to reduce energy consumption (46 % over night) and extend compressor life (can be deactivated). Noise Level<51 dB(A) Built-in condensation drain to eliminate water accumulation in the rotor chamber. patent compressor technology reduces vibration to protect samples, Rotors must be variable

EU/USA/Japan

Dr Muhammad Rizwan Yousuf Muhammad Yasin Tippu Prof Dr Masood Rabbani Qaisar Iqbal Associate Professor Associate Professor Dean FVS PM (F&P) Convener Member Member Member