3
Temperature probe GTL 260 / 260M GTL 280 / 280M G ½” standard process connection Sensor completely made of stainless steel Characteristic The temperature probes are designed for temperature monitoring in pipes and tanks, temperature measurements in steam and pres- sure pipes and for monitoring of CIP- / SIP- processes. Suitable weld-in sleeves ensures disassembling of the temperature probe without process opening or interruption. The probes can be provided with different electric connections and with or without integrated head transmitter. Specifications Temperature ranges : ambiance: -40..+80 °C probe tip: -40..+200 °C CIP- / SIP-temperature:140 °C < 30 min. Measuring resistor : Pt100 Accuracy : class A, class AA Electric connection : G ½” standard suitable weld-in sleeves APHZ30-G12S, APHK35-G12S (see accessories) Fitting length : 50, 100, 150, 250 mm Probe head : Ø 18 mm Protection tube and probe tip: Ø 6 mm protection tube Ø 6 mm without taper Ø 3 mm protection tube Ø 6 mm and tapered probe tip Ø 3 mm Response time : FS Ø 3 mm: T90 ≤ 1.5 s FS Ø 6 mm: T90 ≤ 7.4 s Working pressure : max. 10 bar Material Probe head : 1.4305 Protection tube and tip : 1.4404 Protection class : IP67 / IP69K CE conformity : EN 61326-1:2013 / -2-3:2013 Design types GTL 260 / 260M GTL 280 / 280M Electric connection cable connection M12-plug, 4-pin (1.4305) fixed cable 2.5 m, PVC LIYY 281: 4 x 0.25 mm² 281M: 2 x 0.25 mm² Transducer GTML2 (only for GTL 260M / GTL 280M) Integrated head transmitter Measuring range : -10..+40 °C * / 0..50 °C * / 0..100 °C * 0..150 °C * / 0..200 °C * or freely in range -20..200 °C * Power supply : 10..30 V DC Measuring output : analog, 4..20 mA, 2-wire Output signal in case of error : < 3.75 mA or > 21.5 mA, selectable * Filter : integrated low-pass, 4-step * Reaction time : < 150 ms (filter 0), < 300 ms (filter 1) < 800 ms (filter 2), < 3 s (filter 3) Working temperature : -40..+70 °C Measurement accuracy : < 0.2 % FS Temperature drift : < 0.01 % FS / K * Programmable via GTL - Configuration tool (accessories) Note: The default settings are marked in bold. continued on next page pi_gr_GTL260_280_e V1.01-00 1 GTL 280M GTL 260M

Temperature probe GTL 260 / 260M probe tip: -40..+200 °C ......Temperature probe GTL 260 / 260M GTL 280 / 280M G ½” standard process connection Sensor completely made of stainless

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

  • Temperature probe GTL 260 / 260M GTL 280 / 280M

    ● G ½” standard process connection● Sensor completely made of stainless steel

    CharacteristicThe temperature probes are designed for temperature monitoring inpipes and tanks, temperature measurements in steam and pres-sure pipes and for monitoring of CIP- / SIP- processes.

    Suitable weld-in sleeves ensures disassembling of the temperature probe without process opening or interruption.

    The probes can be provided with different electric connections and with or without integrated head transmitter.

    SpecificationsTemperature ranges : ambiance: -40..+80 °C

    probe tip: -40..+200 °CCIP- / SIP-temperature:140 °C < 30 min.

    Measuring resistor : Pt100 Accuracy : class A, class AAElectric connection : G ½” standard

    suitable weld-in sleeves APHZ30-G12S, APHK35-G12S (see accessories)

    Fitting length : 50, 100, 150, 250 mmProbe head : Ø 18 mmProtection tube and probe tip:Ø 6 mm protection tube Ø 6 mm without taperØ 3 mm protection tube Ø 6 mm and tapered

    probe tip Ø 3 mmResponse time : FS Ø 3 mm: T90 ≤ 1.5 s

    FS Ø 6 mm: T90 ≤ 7.4 sWorking pressure : max. 10 barMaterial Probe head : 1.4305Protection tube and tip : 1.4404

    Protection class : IP67 / IP69KCE conformity : EN 61326-1:2013 / -2-3:2013

    Design types

    GTL 260 / 260M GTL 280 / 280M

    Electric connection cable connection M12-plug, 4-pin (1.4305)

    fixed cable 2.5 m, PVC LIYY 281: 4 x 0.25 mm²281M: 2 x 0.25 mm²

    Transducer GTML2 (only for GTL 260M / GTL 280M)Integrated head transmitterMeasuring range : -10..+40 °C * / 0..50 °C * / 0..100 °C *

    0..150 °C * / 0..200 °C *or freely in range -20..200 °C *

    Power supply : 10..30 V DCMeasuring output : analog, 4..20 mA, 2-wireOutput signal in case of error : < 3.75 mA or > 21.5 mA, selectable *Filter : integrated low-pass, 4-step *Reaction time : < 150 ms (filter 0), < 300 ms (filter 1)

    < 800 ms (filter 2), < 3 s (filter 3)Working temperature : -40..+70 °CMeasurement accuracy : < 0.2 % FSTemperature drift : < 0.01 % FS / K

    * Programmable via GTL - Configuration tool (accessories)

    Note: The default settings are marked in bold.

    continued on next page

    pi_gr_GTL260_280_e V1.01-00

    1

    GTL 280M

    GTL 260M

  • Dimensions Connection Design type GTL 260 or GTL 260M:

    without transducer (4-wire): with transducer (2-wire):

    Design type GTL 280 or GTL 280M:

    without transducer (4-wire): with transducer (2-wire):

    Option

    TK Design type GTL 280 and GTL 280M with Teflon cableGTL 280: 4 x 0.14 mm²GTL 280M: 2 x 0.14 mm²Teflon cable up to 200 °C

    continued on next page

    2 pi_gr_GTL260_280_e V1.01-00

    GTL 260 GTL 260M

    GTL 280 GTL 280M

  • Product key

    1. 2. 3. 4. 5. 6. 7.

    GTL - - - - - -

    1. Design type260 cable connection M12-plug,

    without integrated transducer260M cable connection M12-plug

    with integrated transducer280 fixed cable (PVC) connection 2.5m,

    without integrated transducer280M fixed cable (PVC) connection 2.5m,

    with integrated transducer2. Immersion length TL

    0050 50 mm0100 100 mm0150 150 mm0250 250 mmxxxx any EL in mm

    (e.g. 320 = 320 mm)Ø 6: max. 1000 mm

    3. Diameter protection tube and probe tip6 Ø 6 mm, without taper3 Ø 6 mm, with tapered probe tip Ø 3 mm

    4. Accuracy classA class AD class AA (1/3 class B)

    5. Transducer GTML2 (programmable)ONLY for design types 260M and 280M00 without transducer (design types 260 / 280)M1 measuring range -10..+40 °CM2 measuring range 0..50 °CM3 measuring range 0..100 °C M4 measuring range 0..150 °C M5 measuring range 0..200 °C MB transducer with special measuring range in °C

    (state special measuring range separately e.g.: 0..75 °C or -20..+30 °CMind the minimum range of 50 °C.)

    6. Option00 without optionH with neck tubeTK Teflon cable for connection via fixed cable

    (only available for GTL 280 / 280M)7. Certificate DIN EN 10204 (indicate only when required,

    multiple responses possible)WZ2.2 factory certification 2.2APZMAT acceptance test certificate 3.1 for material

    (in contact with products)APZ2P acceptance test certificate 3.1 with 2 measuring

    points (0°C / 70°C)APZ3P acceptance test certificate 3.1 with 3 measuring

    points (0°C, 70°C + 1 test point freely selectable)

    APZ4P acceptance test certificate 3.1 with 4 measuring points (0°C, 70°C + 2 test points freely selectable)

    Information on suitable weld-in sleeves can be found in product in-formation GHMadapt/Accessories.

    pi_gr_GTL260_280_e V1.01-00

    3

    /ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth 8 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /FlateEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (U.S. Web Coated \050SWOP\051 v2) /PDFXOutputConditionIdentifier (CGATS TR 001) /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /False

    /CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MarksOffset 6 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /UseName /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice