Upload
xhuyghe
View
1.072
Download
9
Tags:
Embed Size (px)
DESCRIPTION
Technologic Design Engineering
Citation preview
DRILL PRESSTECHNOLOGICAL DESIGN ENGINEERING
XAVIER HUYGHE
DRILL PRESS MACHINE
To drill holes straight and accurate.Good for repetitive tasks because of the good adjustability of the machine.
Bench drill Pillar drill
Overview
Base
Table
Motor
Transmission
Chuck
V-belt
Spindle
Point to point stop
Guide post
Operating leverage
DRILL TABLE
Adjustable in height through a rack and pinion.Fix by clamping
Transforms a rotary motion into a linear displacement.
Used to position and fixate a part.
V-BELT
The speed of the drill can be adjusted by moving the belt on the pulley to a larger or smaller diameter.
The greater the torque, the more the belt tightens itself in the pulley,the less drag.
Moving the belt up will make the drill rotate faster.Moving the belt down will make the drill rotate slower.
n1n2
d2d1= n1=constant
TRANSMISION & DRIVETightening the belt
Motor / Pully
Center point drive pulley
Motor
Loose belt Tight belt
Center point drive pulley
SPINDLE
Operating leverage
Flat torsion spring
Axis where the chuck is mounted on.Axis can move up and down.
SPINDLE
Hendels
Platte spiraal veer
SPINDLE
Operating leverage
Flat torsion spring
SPINDLE
Slots for torque transmission
SPINDLE
SPINDLE
CHUCK
CHUCK
POINT TO POINT STOP
To drill untill a certain depth