435K Technical Specifications

TECHNICAL DATA

Control System

HIAB 435K

Lifting capacity, max

Hydraulic outreach, standard

Inner boom hydraulic extension (stroke)

Outer boom hydraulic extension (stroke)

Lifting height above ground *

Outreach-lifting capacity, standardInner boom 24˚/Outer boom horizontal

Rec. oil flow

Power needed at rec. oil flow

Working pressure

Tank capacity

Slewing angle

Max. inclination at full capacity

Slewing torque, gross

Slewing speed

Lifting speed at standard hydraulic outreach

Inner boom hydraulic extension (time out/in)

Outer boom hydraulic extension (time out/in)

Height in parking position**

Installation space needed***

280,200 ft-lbs

79’ 5”

20’

31’ 7”

92‘

44’ 7” 3,920 lbs

52’ 10” 2,990 lbs

60’ 8” 2,380 lbs

68’ 7” 2,000 lbs

76’ 1” 1,760 lbs

21 - 32 gpm

63 - 94 hp

5,080 psi

57 gal

460˚

5˚

37,400 ft-lbs

12˚/sec

4.63 ft/sec

39 sec / 30 sec

31 sec / 27 sec

9’ 5”

42”

Weights

Crane weight with support leg equipment 14,740 lbs

4500 lbs

3500 lbs

90

80

70

60

50

40

30

20

10

0

ft

LOAD DIAGRAM

* Ground to boom tip assumes 48” installation surface ** Installations surface to highest point on boom in transport position *** Crane base dimensions only. Extra clearance suggested.

Recommended truck specifications• 20,000 lbs GVW FRONT AXLE

• 46,000 lbs GVW REAR AXLE

• 12,000 lbs TAG AXLE

• 30 in3 SECTION MODULUS FRAME

• 110,000 psi YIELD FRAME MATERIAL• 24’6” BODY

www.hiabus.com

Drywall and Building Material Deliveries

435K

HIA

B 4

35K

Cra

neworld class solutions, driven by you.

HIAB 435K CraneBy offering the user access to the 8th story, the HIAB 435K crane complements our market leading four and six story models. With an impressive 280,200 ft-lbs of lifting capacity and a vertical reach of 92 ft, the HIAB 435K will take your building materials and business to new heights.

The HIAB 435K comes standard with the

HIPRO control system which offers several

safety and performance functions. When

approaching an overload condition the crane

will give the operator an audible and visual

signal at 90% and at full capacity the crane

will stop all radius increasing functions. Only

functions that will reduce the crane’s lifting

radius will be allowed. To reduce the dynamic

loading on the crane’s steel structure,

the Automatic Speed Control (ASC) will

progressively reduce the vertical speed of the

crane, when the capacity is between 80%

and 100% of maximum. This will prevent the

operator from making fast movements under

these conditions, which is very important

especially when your boom is 90 ft in the air.

Advanced control system

With a vertical reach of 92 ft, the HIAB 435K achieves new heights in performance and productivity.

Complete load sensing hydraulictechnology is standardThe HIAB 435K’s hydraulic system features ground breaking technology.

The pressure compensated, load sensing Valve 91 M was designed by HIAB

for the sole purpose of being the ultimate truck crane control valve. When

combined with a variable displacement piston pump you’re getting the

highest level of speed, precision and efficiency available.

During operation, the oil flow demands of the crane are constantly changing. The

pump can respond smoothly from a demand of 3 gpm to 35 gpm in milliseconds.

By making only the oil flow that the crane needs, no energy is wasted. Wasted

energy created by many conventional fixed pump systems causes unnecessary

heating of the hydraulic oil resulting in excessive wear and tear to the hydraulic

system, greater consumption of diesel fuel when operating the crane and higher

maintenance costs.

On average, a HIAB drywall crane with its hydraulic system and

variable pump, will consume 325 gallons less diesel fuel per year

compared to other models using fixed displacement pumps. Not

only does this save you money, but it also saves our environment

7,200 lbs of unnecessary carbon dioxide. Over several years, that’s a

saving you can feel good about.

With 280,200 ft-lbs of lifting capacity, the HIAB 435K can be used for a variety of tasks. Shown here, the crane is able to lower this small dumpster from the 8th story and transfer the waste to another container far from the truck.

With nearly 80 ft of horizontal reach, the HIAB 435K can handle 1,760 lbs all the way out horizontally. The HIAB 435K can handle a load of 4,500 lbs, 40 ft out and 80 ft up and if you reduce the radius, it will take the load right up to 92 ft.

The crane has a sturdy, double telescoping inner boom and four telescoping outer boom extensions which gives the crane its awesome reach and still retracts over a 24’6” bed.

CombiDrive2, HIAB’s fully proportional radio remote control, provides an extra dimension in safety and versatility by allowing the operator to take up the best vantage point possible. This is essential when lifting loads to extreme heights.

The CombiDrive2 comes standard with a 100%, 60% or 30% speed switch. This allows the operator to easily change the speed of the crane — especially useful when adjusting heavy loads at long outreaches while entering the building.

CombiDrive2

year warranty

3&5

Comes StandardSaying you are confident in your

product is one thing, warranting it is

another. The HIAB 435K comes as

standard with a 3-year warranty on the

entire crane and a 5-year warranty on

the structural parts.

If you maintain and use your crane

properly Hiab covers repair or

replacement of components for

3 years. In addition, in the 4th or

5th year, again assuming proper

maintenance and use, if a main

structural component fails Hiab will

cover the costs of the parts. Certain

normal exceptions (such as replacement

of consumables) apply.

Hiab CombiDrive2

With 280,200 ft-lbs of lifting capacity, the HIAB 435K can be used for a variety of tasks. Shown here, the crane is able to lower this small dumpster from the 8th story and transfer the waste to another container far from the truck.

Attention to detail — built-inAll the hose tracks are robust and well protected to prevent damage

from excessive road vibration in transport and contact with foreign

objects like tree branches and tie down straps. The crane has

23 ft wide stabilizers and comes standard with an extra set of rear

stabilizers for added stability.

435K Technical Specifications

TECHNICAL DATA

Control System

HIAB 435K

Lifting capacity, max

Hydraulic outreach, standard

Inner boom hydraulic extension (stroke)

Outer boom hydraulic extension (stroke)

Lifting height above ground *

Outreach-lifting capacity, standardInner boom 24˚/Outer boom horizontal

Rec. oil flow

Power needed at rec. oil flow

Working pressure

Tank capacity

Slewing angle

Max. inclination at full capacity

Slewing torque, gross

Slewing speed

Lifting speed at standard hydraulic outreach

Inner boom hydraulic extension (time out/in)

Outer boom hydraulic extension (time out/in)

Height in parking position**

Installation space needed***

280,200 ft-lbs

79’ 5”

20’

31’ 7”

92‘

44’ 7” 3,920 lbs

52’ 10” 2,990 lbs

60’ 8” 2,380 lbs

68’ 7” 2,000 lbs

76’ 1” 1,760 lbs

21 - 32 gpm

63 - 94 hp

5,080 psi

57 gal

460˚

5˚

37,400 ft-lbs

12˚/sec

4.63 ft/sec

39 sec / 30 sec

31 sec / 27 sec

9’ 5”

42”

Weights

Crane weight with support leg equipment 14,740 lbs

4500 lbs

3500 lbs

90

80

70

60

50

40

30

20

10

0

ft

LOAD DIAGRAM

* Ground to boom tip assumes 48” installation surface ** Installations surface to highest point on boom in transport position *** Crane base dimensions only. Extra clearance suggested.

Recommended truck specifications• 20,000 lbs GVW FRONT AXLE

• 46,000 lbs GVW REAR AXLE

• 12,000 lbs TAG AXLE

• 30 in3 SECTION MODULUS FRAME

• 110,000 psi YIELD FRAME MATERIAL• 24’6” BODY

Hiab Inc. 12233 Williams Road, Perrysburg OH 43551 Tel: 419-482-6000 Fax: 419-482-6001 Email: us.sales@hiab.com www.hiabus.comHiab is part of Cargotec Corporation

Hiab South Douglasville GA Tel: 770-949-1007 Fax: 770-949-7552

Hiab New England Chelmsford MA Tel: 603-860-9140 Fax: 603-232-0650

Hiab Mid-Atlantic Cornelius NC Tel: 704-896-9089 Fax: 704-895-4801

Hiab Southwest Hurst TX Tel: 817-283-3100 Fax: 817-283-3515

Hiab West Fontana CA Tel: 909-357-7830 Fax: 909-357-8192

Hiab Midwest Franklin Park IL Tel: 847-288-0190 Fax: 847-288-0192

Hiab Maryland Hagerstown MD Tel: 301-797-7705 Fax: 301-797-7284

Hiab St. Louis High Ridge MO Tel: 636-677-2980 Fax: 636-677-5800

Hiab Gulf Coast Houston TX Tel: 936-582-1841 Fax: 419-482-6910

Hiab Northwest Kent WA Tel: 425-656-4300 Fax: 425-656-4449

Hiab North Perrysburg OH Tel: 419-482-6000 Fax: 419-482-6001

Hiab Desert Phoenix AZ Tel: 623-523-4344 Fax: 419-482-6907

Hiab Southeast Tampa FL Tel: 813-628-4633 Fax: 813-628-4772

Hiab Northeast Toms River NJ Tel: 732-240-1134 Fax: 732-240-1135

Due to the company’s policy of continued development, we reserve the right to change specifications without prior notice.