T S I L E C I R P 01 2 5 - W F O'Brienwfobrien.com.au/images/downloads/Dorma_Glass.pdf · BTS - Floor Spring Selector Chart 28 BTS - Floor Springs & Accessories 29-32 RTS - Transom

PRICE LIST 2015—Glass Fittings & Hardware

CONTENT—

Index and Glossary of Terms/ Finshes 1

Terms and Conditions 2

Information

Glass Fittings, Systems and Solutions 3 On-Eazi Door Rails 4

Toughened Glass Pivot Door Components 6

DORMA Patch Range/Configurations 7

Universal Pivot Door Patch Fittings 8 Universal & On-Eazi Patch Locks 10-12 DORMA Door Handing Diagram 11

Lock Cylinders & Keepers 13 Visur – pivot doors with concealed fittings 14 Sliding Doors & Operable Wall Systems 15-19 Display Case & Glass Hinge Solutions 20 Pool Fencing Solutions 21 Madinoz Entrance Handles 22-24 Architectural Hardware & Door Closers 25 Panic Hardware – Aluminium & Toughened 26-27 BTS - Floor Spring Selector Chart 28 BTS - Floor Springs & Accessories 29-32 RTS - Transom Concealed Closers 33-35 TS – Surface Mounted Closers 36-42 Product Information safety Instructions 43 Abbreviations and Glossary of Terms 46

Lead Times are a guide only, based upon working days to despatch from the date of Final Order Confirmation.Different discounts apply across Glass Fittings & Solutions,

Madinoz and Architectural Hardware & Closers

TERMS AND CONDITIONS—

This Agreement including the terms and conditions contains the complete and final agreement between DORMA Australlia Pty. Ltd. herein known as the “SELLER” and the endorsed Purchaser , herein known as the “BUYER”. No other agreement in any way modifying any of the said terms and conditions will be binding upon the SELLER unless made in writing and signed by the SELLER’S authorised representative.

Title Risk. All goods delivered by the SELLER shall remain the property of the SELLER until payment has been made in full by the BUYER but shall nevertheless be at the risk of the BUYER upon delivery to a carrier or onto the BUYER’S transport and the BUYER shall indemnify the SELLER in respect of any loss or any damage sustained thereafter.

Delivery. (a) The SELLER shall endeavour to deliver the items included in each order on the promised date, however no liability shall result from delay, prevention or non performance where caused by or arising out of strikes, industrial disputes, labour shortages, lockouts, breakdown or damage of property or plant, accident fire storm or any other act of God, requirement of the Government or any instrumentality created thereby, transport difficulties, embargoes, late delivery, shortage of or inferior quality materials or any other cause which is beyond the control of the SELLER. The BUYER shall be bound to accept and pay for any goods delivered late and the SELLER may, in any circumstances, deliver in one or more lots and at different times and by different shipments.(b) Delivery of all goods shall be made at the customer’s expense and will be delivered to the customer on a free on board basis unless otherwise agreed.

Price variation. If there shall be any increase in the cost of materials or labour used in the manufacture, preparation, construction or delivery of the goods between the date of the order and the date that the goods are delivered, the price quoted in the order shall be increased accordingly. The SELLER reserves the right to increase the price quoted without notice and/or if notification is given the BUYER has the right to pay the increased price or opt out of the Contract by giving written notice to the SELLER within seven days after notification and to pay for any materials ordered and goods manufactured to date of the SELLER’S receipt of the BUYER’S notice to opt out of the Contract.

Terms of payment. Payment is to be made net 30 days, that is within 30 days from the end of the month when delivery took place.

Price list. The publication of a price list does not in any way restrict our right to decline orders at any time. Prices quoted are subject to withdrawal or revision at any time. All prices shown on the price lists or quotations are in Australian Dollars. Prices quoted do not include any charges for delivery, insurance, packaging, imposts or charges of whatsoever nature that may be imposed by any government or instrumentality thereof which shall be extra and additional to the price quoted.

Governing law. This Contract shall be construed and interpreted according to the‑laws of the State of Victoria, Australia.

Arbitration. In the event of any dispute arising hereunder the matter shall be referred to a sole arbitrator whose decision shall be final. Such Arbitrator shall be the president of The Institute of Chartered Accountants of Australia or his nominee who shall have at least ten years in practice and such arbitration shall be held at such place or places as the Arbitrator shall appoint. An arbitration shall be a reference under the laws for the time being in force and relative to such procedure.

Trade Practices Act. The express warranty set forth in these terms and conditions is in lieu of all other warranties expressed or implied (save and except warranties implied by a virtue of Competition and Consumer Act 2010 (as amended) in sofar as any Contract for the supply of goods hereunder may fall within the definition of consumer transaction under that Act).

Limitations of claims. The sole and exclusive remedies for breach of any and all warranties and the sole remedies for the SELLER’S liability of any kind (including liability for negligence) with respect to any goods supplied hereunder and all other performances if any by the SELLER under or pursuant to the Contract shall be the repair or replacement of the defective item at no charge to the BUYER except for labour costs for repairs or removal of the defective item and installation of a new replacement unit and transportation charges for delivery of the replacement and return of the defective item.

Product liability. The SELLER shall not be liable to an extent greater than the maximum quoted value of the goods sold and there shall be no liability whatsoever for any consequential or incidental damages howsoever arising.

Liability to third parties. The SELLER assumes all risk and liability for loss, damage or injury to the person or property of the SELLER or others arising out of the use and/or possession of any of the products or goods sold thereunder.

Modifications. This order including the terms and conditions on the face and reverse side hereof contains the complete and final agreement between the SELLER and BUYER and no agreement or other understanding in any way purporting to modify the terms and conditions thereon shall be binding upon the SELLER unless ordered in writing and signed by the SELLER. Should there be any conflict between these conditions and any further terms or conditions put forward by the BUYER these conditions shall prevail but the BUYER may give written notice of two days of receipt of this document that he refuses to be bound by these conditions in which case the SELLER may rescind the Contract.

Defects. The BUYER shall be deemed to have inspected and accepted the goods as delivered and as having acknowledged that they have been received in proper and good condition unless the SELLER receives within seven days of the receipt of the goods by the BUYER a written notification of any claim.

Cancellations. Should the order be cancelled and/or suspended at any time before the delivery of the full quantity the BUYER agrees to accept delivery of the finished goods received by the SELLER and/or in transit and in addition agrees to pay upon presentation of the SELLER’S invoice the cost of any partly manufactured goods producted against the BUYER’S order and the unrecovered amount for the cost of tools involved. The BUYER shall also pay the value of extras as represented by the difference between the price of the original quantity and the price basis on the lesser quantities delivered.

Access. Where the SELLER is required to perform work on or deliver goods to the BUYER’S premises or premises specified by the BUYER, the SELLER shall be given uninterrupted access and reasonable facilities during normal working hours for performance of the Contract, and the BUYER shall accept the delivery of, unload, provide suitable protection for and keep secure all goods delivered from time to time.

Reports. The SELLER accepts no liability in respect of any report, recommendation or scheme submitted to the BUYER where no specific charge is made for such reports, recommendations or schemes. Where such charge is made, the SELLER’S liability shall be limited as provided in these terms and conditions.

Quotation. All prices quoted will remain valid for a period of fourteen days from the date of the quotation and any order placed within the SELLER’S based on a quotation must be received by the SELLER within the fourteen day period. Should an order be received outside the fourteen day period then the SELLER has the right to vary the price quoted.

Assignment. The SELLER reserves the right to assign or transfer any part of this Contract to any other person, firm, company or corporation and the SELLER further reserves the right to sub‑contract the manufacture and/or supply for any parts of the goods quoted for any material or services to be supplied.

Tools and Equipment. All tools and equipment, dies and other machinery used in the manufacture of the BUYER’S order shall be, and shall remain, the property of the SELLER unless otherwise agreed to in writing and signed by the SELLER’S authorised representatives.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

Price‑list 2015 PRICES DO NOT INCLUDE GST 2

GLASS FITTINGS,SYSTEMS & SOLUTIONS—

ON-EAZI 12MM TOUGHENED GLASS SINGLE ACTION PIVOT DOOR RAILS - 100KG & 1000MM MAX

4

ON-EAZI 12MM TOUGHENED GLASS DOUBLE ACTION PIVOT DOOR RAILS - 150KG MAX

Article No. Description REF SAA SSS PSS S/F

CDS41On-Eazi 85mm Bottom Pivot Door Rail

6.1 281 333 340 O/A

CDS42On-Eazi 85mm Bottom Pivot Door Rail, including DC590 Lock, Cylinder and Turn

6.3 429 500 507 O/A

CDS43On-Eazi 85mm Top Pivot Door Rail, to suit free pivot

6.5 330 389 396 O/A

CDS43RTSOn-Eazi 85mm Top Pivot Door Rail, to suit RTS Transom Closer

6.6 363 426 433 O/A

CDS43RTSL/ROn-Eazi 85mm 3 Degree Offset Top Pivot Door Rail, to suit RTS Transom Closer

528 611 618 O/A

CDS44On-Eazi 85mm Top Pivot Door Rail, to suit free pivot, including DC590 Lock, Cylinder and Turn

485 537 544 O/A

CDS44RTSOn-Eazi 85mm Top Pivot Door Rail, to suit RTS Transom Closer, including DC590 Lock, Cylinder and Turn

495 574 581 O/A

CDS44RTSL/ROn-Eazi 85mm 3 Degree Offset Top Pivot Rail, suit RTS Transom Closer, inc DC590 Lock, Cylinder and Turn

660 759 766 O/A

Article No. Description REF SAA SSS* PSS* S/F

CDS41L/ROn-Eazi 85mm Bottom Pivot Door Rail, including Single Action Offset Arm*

6.11 528 611 618 O/A

CDS42L/ROn-Eazi 85mm Bottom Pivot Door Rail, including DC590 Lock, Cylinder, Turn & Single Action Offset Arm*

693 796 803 O/A

CDS43L/ROn-Eazi 85mm Top Pivot Door Rail, to suit free pivot, including Single Action Offset Arm*

6.12 578 666 673 O/A

CDS44L/ROn-Eazi 85mm Top Pivot Rail, suit free pivot, inc. DC590 Lock, Cylinder, Turn & Single Action Offset Arm*

726 833 840 O/A

*NB Offset Arms are SS Look-Alike Alum. Finish

O/A10-157-103-51-2StockDays to Despatch

Add 10% for 13.00-16.00mm Glass POA 16.01-19.00mm Glass POA for 19.01-22.52mm Glass

Increased Rail Cover Heights AvailablePricing On Application

O/A10-157-103- 51-StockDays to Despatch 3-


TOUGHENED GLASS PIVOT DOOR RAILS ON-EAZI 12MM—

5

ON-EAZI 12MM TOUGHENED GLASS SLIDING DOOR RAILS

Add 10% for 13.00-16.00mm Glass POA 16.01-19.00mm Glass POA for 19.01-22.52mm Glass

Increased Rail Cover Heights AvailablePricing On Application


CDS41B/SOn-Eazi 85mm Bottom Sliding Door Rail with Rollers to suit Floor Track

6.8 759 870 877 O/A

CDS41SOn-Eazi 85mm Bottom Sliding Door Rail to suit Floor Guide

6.2 231 278 285 O/A

CDS42B/SOn-Eazi 85mm Bottom Sliding Door Rail with Rollers to suit Floor Track & DC590 Lock, Clinder & Turn

6.9 908 1036 1043 O/A

CDS42SOn-Eazi 85mm Bottom Sliding Door Rail with DC590 Lock, Cylinder & Turn to suit Floor Guide

6.4 396 463 470 O/A

CDS43SOn-Eazi 85mm Bolt Through Sliding Door Top Rail

6.9 347 407 414 O/A


CDS47On-Eazi 85mm Fixed Sidelight Bottom Rail and Spacer Infill

6.10 297 352 359 O/A

CDS48On-Eazi 85mm Fixed Sidelight Top Rail and Spacer Infill

6.10 297 352 359 O/A

ON-EAZI TOUGHENED GLASS STACKING SIDELIGHT RAILS


CDS40.15On-Eazi 85mm Standard Rail Cover

23 25 88 109 O/A

14 17 O/A

17 20O/A

17 20O/A

21

Article No. Description REF MILL SAA SSS S/FPSS

CDS40.14 On-Eazi 85mm Endcap 12mmOn-Eazi 85mm Endcap 15mm

CDS40.14SOn-Eazi 85mm Top Sliding Endcap

CDS40.17 On-Eazi Sidelight Endcap

ZDS40.14

ON-EAZI RAIL COMPONENTS

5 2015 PRICES DO NOT INCLUDE GST Price‑list

TOUGHENED GLASS SLIDING DOOR RAILS ON-EAZI 12MM—

6

ON-EAZI RAIL COMPONENTS


CDS40.16A On-Eazi Standard 85mm Cover Adaptor 4

CDS40.16M On-Eazi 100mm Cover Adaptor 14

CDS40.1B On-Eazi Cover Retaining Bead 3

CDS40.4 On-Eazi Side Load Adjustable Top Adaptor 102

CDS40.6RTS On-Eazi Top Adaptor to suit RTS 104

CDS40.6RTS LH On-Eazi Top Adaptor to suit RTS incl 3˚ Offset 156On-Eazi Top Adaptor to suit RTS incl 3˚ Offset 156

Article No Description Base

Article No Description Base

PT10.1 Universal Floor Spring/Pivot Insert 51

PT20.1 Universal Top Pivot Insert 44

PT22.1 Universal Top RTS Insert(03-133/80311300099)

149.50

PT30.1 Universal Pivot Insert 53

PT30.1S Universal Stop Insert 51

CDS40.6RTS RH

PATCH FITTING COMPONENTS

Article No. Description REF BASE SSS PSS PBU S/F

CD58On-Eazi Heavy Duty Surface Mount Top Pivot

6.18 O/A

CD59 On-Eazi M8 Screw Point 29.00

20.00 31.00

PATCH FITTING COMPONENTS


TOUGHENED GLASS PIVOT DOOR COMPONENTS—


DORMA PATCH FITTINGS—


PT10Universal Pivot Door Bottom Patch Fitting

6.19 95 95 95 O/A

PT10C/FUniversal Pivot Door Bottom Centre Fix Patch Fitting

6.20 139 139 139 O/A

PT20 Universal Pivot Door Top Patch Fitting 6.19 95 95 95 O/A

PT20C/FUniversal Pivot Door Top Centre Fix Patch Fitting

6.21 139 139 139 O/A

PT22Universal Pivot Door Top RTS Transom Closer Patch Fitting

6.22 172 172 172 O/A

PT22C/FUniversal Pivot Door Top Centre Fix RTS Transom Closer Patch Fitting 220 220 220 O/A

PT30Universal Highlight Pivot Patch Fitting

6.23 122 122 122 O/A

PT30C/FUniversal Highlight Centre Fix Pivot Patch Fitting 165 165 165 O/A

PT30SUniversal Highlight / Overplanel Stop Patch Fitting

6.23 159 159 159 O/A

PT40Universal Highlight / Sidelight Pivot Patch Fitting

6.24 169 169 169 O/A

PT40SUniversal Highlight / Sidelight Stop Patch Fitting

6.24 197 197 197 O/A

PT40/90Universal Highlight / Sidelight 90˚ Return Pivot Patch Fitting

6.25 O/A O/A O/A O/A

PT40/135Universal Highlight / Sidelight 135˚ Return Pivot Patch Fitting

6.26 O/A O/A O/A O/A

PT41Universal Highlight / Sidelight / Fin Pivot Patch Fitting

6.27 531 669 669 O/A

PT41SUniversal Highlight / Sidelight / Fin Stop Patch Fitting

6.27 567 707 777 O/A

PT60Universal Highlight / Sidelight Patch Fitting

6.28 172 281 306 O/A

PT60/SUniversal Highlight / Sidelight Stop Patch Fitting

6.28 172 281 306 O/A

PT70Universal Highlight Link / Stop Patch Fitting

6.29 163 216 237 O/A

PT80Universal Four Over Panel Linking Patch Fitting

6.30 149 223 245 O/A

PT81Universal Four Panel Link Patch Fitting with Fin 648 779 856 O/A

15 and 19 Fittings Available, Pricing On Application

UNIVERSAL & ON-EAZI 12MM TOUGHENED GLASS PATCH FITTINGS

* Discontinued On-Eazi / CD Series fittings available on application.

O/A10-157-103-51-2StockDays to Despatch

8

UNIVERSAL & ON-EAZI 12MM TOUGHENED GLASS PATCH FITTINGS 100KG MAX



TOUGHENED GLASS PATCH FITTINGS 12MM—

UNIVERSAL 12MM TOUGHENED GLASS SINGLE ACTION OFFSET PIVOT DOOR PATCH FITTINGS - 100KG & 1000MM W MAX

9

ON-EAZI 12MM TOUGHENED GLASS PATCH FITTINGS

15 and 19 Fittings Available, Pricing On Application

Article No. Description REF SAA SSS PSS PBU S/F

CD87S/O On-Eazi Slide Over, Highlight Stop Patch Fitting (No Holes Required)

6.31 224 O/A

Article No. Description REF SAA SSS* PBU S/F

311.1L/RUniversal Single Action Offset Bottom Pivot Door Patch Fitting*

6.33 O/A O/A

312.1L/RUniversal Single Action Offset Upper Pivot Door Patch Fitting*Please add 80201400 plastic bush

6.33 O/A O/A

339.1Universal Frame Mounted Single Action Pivot Assembly with Clamping Block*

6.35 O/A O/A

339.2Universal Frame Mounted Single Action Pivot Assembly with Screw on Bracket*

6.35 O/A O/A

339.3Universal Frame Mounted Single Action Pivot Assembly with Surface Fixing Plate*

6.35 O/A O/A

326.1L/RUniversal Overpanel / Highlight Single Action Pivot Door Patch Fitting*

6.34 O/A O/A

327.1L/RUniversal Overpanel / Highlight /Sidelight Single Action Pivot Door Patch Fitting*

6.34 O/A O/A

S

*NB Offset Arms are SS Look-Alike Alum. Finish

281

228

223

187

177

146

307

292

445

445

390

390

390

470

515

Off Set Arms Are SS Look-Alike Aluminium Finish (F199)

4

Article No. Description REF MILL SAA SSS PSS S/F

03-106 (PT10, 20, 22)

Patch fitting covers per pair 43 O/A6135 61

03-130 (PT30) Patch fitting covers per pair 62 O/A7753 108

03-145 (PT40) Patch fitting covers per pair 79 O/A12070 141

03-106.C/F (PT10, 20, 22, Centre Fix)

Patch fitting covers per pair 48 O/A6839 68

03-214 (US10) Patch fitting covers per pair 178 O/A226162 250

StockDays to Despatch


UNIVERSAL & ON-EAZI PATCH FITTINGS COVER SETS


TOUGHENED GLASS PATCH FITTINGS 12MM—

10

ON-EAZI & UNIVERSAL TOUGHENED GLASS PATCH LOCKS

O/A10-157-103- 51- 2StockDays to Despatch

ON-EAZI TOUGHENED GLASS MINI PATCH LOCKS


US10Universal Corner Fix Bottom Patch Lock, Euro Cylinder & Turn

6.41 O/A

US20Universal Side Fix Patch Lock, Euro Cylinder & Turn

6.42 O/A

GK50Universal Side Fix, Glass Sidelight Patch Lock Keeper, suit US20

6.42 O/A

CD351BOn-Eazi Bottom Patch Lock, DC590 Lock, Cylinder & Turn

6.45 O/A

CD351AOn-Eazi Side Fix Patch Lock, DC590 Lock, Cylinder & Turn

6.43 O/A

CD351KOn-Eazi Side Fix Glass Sidelight Patch Lock Keeper, suit CD351A

6.44 O/A

CD351SOn-Eazi Side Fix Sliding Door Patch Lock, DC591 Lock, Cylinder & Turn

6.46 O/A

CD351KSOn-Eazi Side Fix Glass Sidelight Sliding Patch Lock Keeper, suit CD351S

6.47 O/A

342.1Universal Bottom Patch Lock, Euro Cylinder & Turn

6.38 O/A

M14.400Universal Bottom Patch Lock, Euro Cylinder & Turn

6.40 O/A

343.1Universal Slide Over Bottom Patch Lock, Euro Cylinder & Turn (No Holes Required)

6.39 O/A

Article No. Description REF SAA SSS PSS

CD49On-Eazi Mini Patch Lock including Cylinder *(CP/SCP Alum Similar)

CD56TPOn-Eazi Toilet Patch Lock including Privacy Indicator & Emergency Snib 500

CD56TPKOn-Eazi Toilet Patch Lock Keeper to suit CD56TP 359

S/F

O/A

O/A

O/A

220

285

235

330

388

322

314

346

272

259

220 220

285 285

235 235

345 380

372 505

306 388

298 431

330 412

310 343

226

162 218

530

396

6.62

6.63

6.63



TOUGHENED GLASS PATCH LOCKS ON-EAZI & UNIVERSAL—


DORMA GLASS DOOR HANDING DIAGRAM—

ON-EAZI TOUGHENED GLASS 1050 SERIES LEVER PATCH LOCKS

12

ON-EAZI TOUGHENED GLASS 451 SERIES NARROW STILE LEVER PATCH LOCKS



CD451On-Eazi Narrow Stile Patch Lock with Cylinder & Turn

6.48 594 539 678 O/A

CD451EOn-Eazi Narrow Stile Egress Patch Lever Lock with Cylinder & Turn

6.49 671 616 789 O/A

CD451FOn-Eazi Narrow stile Patch Lever Lcok with Cylinder & Turn

6.50 816 761 1113 O/A

CD451KOn-Eazi Narrow Stile Glass Sidelight Patch Keeper

6.51 519 464 525 O/A

CD451KEOn-Eazi Narrow Stile Glass Sidelight Patch Keeper with Electric Strike

6.52 1324 1304 1340 O/A

CD451/3540On-Eazi Narrow Stile Egress Patch Lock with 3540 Lock, External Cylinder & Internal Egress Lever

6.53 987 932 974 O/A

CD451K/3540On-Eazi Narrow Stile Patch Lock Keepr to suit CD451/3540

6.54 473 418 510 O/A


CD1050On-Eazi Patch Lock with ST9600 Mortice Lock, Cylinder & Turn

6.55 759 681 742 O/A

CD1050EOn-Eazi Egress Patch Lever Lock with Noosa Lever, ST9600 Mortice Lock, Cylinder & Turn

6.59 760 682 804 O/A

CD1050FOn-Eazi Patch Lever Lock with Noosa Leverset, ST9600 Mortice Lock, Cylinder & Turn

6.57 886 830 877 O/A

CD1050K On-Eazi Glass Sidelight Patch Keeper 6.58 591 521 609 O/A

CD1050KEOn-Eazi Patch Lock Glass Sidelight Keeper with Electric Strike

6.60 1502 1469 1550 O/A

Handings required on order, refer p11Option for Fitting Special Locks and Furniture, Pricing On Application

Lever Set Options Refer to DORMA 5200 Lever Series

S


TOUGHENED GLASS LEVER PATCH LOCKS ON-EAZI—

13

DORMA CYLINDERS & ESCUTCHEONS


DORMA LOCK KEEPERS & TROUGH STRIKES

Article No. Description REF CP SCP S/F

OVAL.CYL Oval Keyed Cylinder 45 28 O/A

OVAL.C/TURN Oval Cylinder with Turnsnib 50 30 O/A

EXCUTIONS Oval Cylinder Escutcheon 9 9 O/A

CD68C/TEuro / Profile Keyed Cylinder & Turnsnib 58 68 O/A

CD68D/C Euro / Profile Double Keyed Cylinder 51 44 O/A

CD68S/C Euro / Profile Single Keyed Cylinder 43 43 O/A

CD68S/TEuro / Profile Single Cylinder Turnsnib 43 43 O/A

EXC.PRO Euro / Profile Cylinder Escutcheon 48 48 O/A

Article No. Description SAA CP SCP SSS PSS

CD60Top Hat Keeper (Dia. 15mm)

14

CD60STop Hat Keeper with Spring Loaded Cover (Dia. 12.5mm) 38 37

H80519300099Universal Top Hat Keeper with Spring Loaded Cover (Dia. 16mm) 36

M05.194Universal Eccentric Top Hat Keeper (Dia. 15.5mm) 63 O/A

MO5.190345 Keeper Plate with Adjustable Centre Location 17 O/A

CD353 DC590 Trough Strike 13

CD353C CD353 Trough Strike Cover Plate 14 26

CD353S/CCD353 Trough Strike Cover Plate to suit Sliding Door Applications. 18 30


LOCK CYLINDERS & KEEPERS—

VISUR —100% TRANSPARENT & 100% DURABLE

Frameless from top to toe, all glass double-action doors without any visible fixings or fittings?All glass double action doors without any visible fixings?Meet VISUR – a unique system patented for DORMA design and innovation that provides the ultimate in visual appeal and perfect transparency for superior interior designs and architecture. The VISUR system simply remains a discrete presence, and rather than traditional and highly visible forms of hardware, the hardware components are all located and concealed within the surrounding structures (Endurance tested to 500,000 operating cycles).

Article Number Description Trade PriceArt. No. 03.770 VISUR complete set – single leaf door (F114) $2087

Finish – aluminium silver anodised, F114 - EV1 DecoAll kits include transom tube, RTS 85 Closer, top & bottom pivotsSuitable for 10/12mm frameless, max door width 1100mm, weight 85kgPlease indicate with your order the clear width (and if applicable width of sidelights) in mm.er the clear width (and if applicable width of sidelights) in mm.



SLIDING DOORS &OPERABLE WALLSYSTEMS—

16

AGILE 150 & RS120 SLIDING DOOR SYSTEMS


Article No. Description REF BASE SAA S/F

A07.300AGILE 150 Wall Fix Kit @1900mm, (Track, Cover & Acc Set)

9.4 1129 O/A

A07.302AGILE 150 Wall Fix Kit @2900mm, (Track, Cover & Acc Set)

9.4 1277 O/A

A07.301AGILE 150 Ceiling Fix Kit @1900mm, (Track, Cover & Acc Set)

9.5 914 O/A

A07.303AGILE 150 Ceiling Fix Kit @2900mm, (Track, Cover & Acc Set)

9.5 995 O/A

A07.725AGILE 150 Accessory Kit (Roller Carriers, Stops and Guide) 2010 type 623

A07.330 Synchro Kit (includes 2 x A07.725) O/A

A07.350 AGILE 150 Track Profile (a) 9.4 93 O/A

A07.351 AGILE 150 Cover Profile (b) 9.5 74 O/A

A07.352 AGILE 150 Wall Profile (c) 9.4 130 O/A

A07.370 AGILE 150 Track Profile (a) 9.6 111 O/A

A07.371 AGILE 150 Sidelight Infil (b) 9.6 74 O/A

A07.372 AGILE 150 Blank Infil (c) 9.6 74 O/A

R07.101RS120 Sliding Door Kit @1900mm, (Track& Acc Set)

9.7 843

R07.102RS120 Sliding Door Kit @2900mm, (Track& Acc Set)

9.7 973

R07.125 Accessory Kit (Roller Carriers, Stops & Guide) to suit Single Door 599

R07.123RS120 Additional Roller Carrier to suit doors to 120-150kg 263

R07.150RS120 Synchro Kit (includes 2 x R07.125) O/A

R07.131 RS120 Track Profile (a) 150

R07.141 RS120 Cover Profile (b) per (m) 91 O/A

R07.132 RS120 Sidelight Infil 151 O/A

R07.137 RS120 Blank Infil 23 O/A

R07.11812mm Glass Spacer (Suit 2 x R07.125) 17

(a+b)

(a+c)

(a)

(b)

(a+b)

(a+c)

57

200


SLIDING DOOR SYSTEMS AGILE 150 & RS120—

17


Article No. Description REF SSAA SSS PSS S/F

M29.916Manet Set 4.1 Wall Fix Sliding Door Set including Track, Rollers, Stops and Floor Guide 316 SS

1813 O/A O/A

M29.918

Manet Set 5.1 Highlight / Wall Fix Sliding Door Set including Track, Rollers, Stops and Floor Guide 316 SS

2183 O/A O/A

M29.920

Manet Set 6.1 Highlight / Sidelight Fix Sliding Door Set including Track, Rollers, Stops and Floor Guide 316 SS

2183 O/A O/A

R30.700RSP80 Sliding Door Set including Track, Rollers, Stops and Floor Guide Alumiunium EV1 Deco

1906 O/A

MANET & RSP80 SLIDING DOOR SYSTEMS

Article No. Description REF BASE MILL SAA S/F

CDS40TUOn-Eazi Top Sliding Door Track - Undrilled per mtr.

9.10 47 O/A

CDS49.2 Track Roller to suit CDS40T - Double 9.10 53

CDS49.3 Track Stop to suit CDS40T 21

CDS49.4Aluminium Door Mounting Plate to suit CDS49.2

26

CDS49.5Accessory Kit to suit CDS40T (2 x CDS49.2, 2 x CDS49.3) 147

CDS50TOn-Eazi Botom Floor Track - Brass, per mtr. 80 O/A

CDS50.GUIDEOn-Eazi Aluminium Upper Glass Guide Channel to suit CDS50T 25 O/A

CDS50.1On-Eazi Bottom Roller Wheel Assembly to suit CDS50T 163


CD01External Roller Guide to suit Rail

9.12 145 O/A

CD02External Nylon Guide to suit Glass (specify 10, 12, 15mm Glass)

9.12 80

CD03Internal Roller Guide to suit On-Eazi Door Rail

9.12 O/A

CD04Internal Roller Guide to suit Aluminium Framed Door

9.12 84

CD05On-Eazi Rail Fittied Guide to suit 20 x 20mm Guide Channel

9.12 56

CD06Rail to Rail Roller Guide to suit On-Eazi Door Rail

9.13 148

CD07Multi Fit Bottom Guide to suit Glass (8-13.52mm Glass)

9.13 70 97 O/A

CD08Bacl MultiFit Bottom Guide to suit Glass (8-12mm Glass)

9.13 24

9.10

9.10

9.10

9.11

9.11

9.11

78

CD262CS.SS Radius Top Clamp Patch Fitting(2 X Units = 1 Set)

9.14 188

ON-EAZI TOUGHENED GLASS SLIDING DOOR SOLUTIONS


SLIDING DOOR SYSTEMS—

18


Article No. Description REF BASE MILL SAA S/F

CDS40TUOn-Eazi Top Sliding Door Track - Undrilled per mtr.

9.10 47 O/A

CDS49.2 Track Roller to suit CDS40T - Double 9.10 53

CDS49.3 Track Stop to suit CDS40T 21

CDS49.4Aluminium Door Mounting Plate to suit CDS49.2

26

CDS49.5Accessory Kit to suit CDS40T (2 x CDS49.2, 2 x CDS49.3) 147

CDS50TOn-Eazi Botom Floor Track - Brass, per mtr. 80 O/A

CDS50.GUIDEOn-Eazi Aluminium Upper Glass Guide Channel to suit CDS50T 25 O/A

CDS50.1On-Eazi Bottom Roller Wheel Assembly to suit CDS50T 163


CD01External Roller Guide to suit Rail

9.12 145 O/A

CD02External Nylon Guide to suit Glass (specify 10, 12, 15mm Glass)

9.12 80

CD03Internal Roller Guide to suit On-Eazi Door Rail

9.12 O/A

CD04Internal Roller Guide to suit Aluminium Framed Door

9.12 84

CD05On-Eazi Rail Fittied Guide to suit 20 x 20mm Guide Channel

9.12 56

CD06Rail to Rail Roller Guide to suit On-Eazi Door Rail

9.13 148

CD07Multi Fit Bottom Guide to suit Glass (8-13.52mm Glass)

9.13 70 97 O/A

CD08Bacl MultiFit Bottom Guide to suit Glass (8-12mm Glass)

9.13 24

9.10

9.10

9.10

9.11

9.11

9.11

78

CD262CS.SS Radius Top Clamp Patch Fitting(2 X Units = 1 Set)

9.14 188

ON-EAZI SLIDING DOOR FLOOR GUIDES

DOOR STOPS

Article No. Description REF SAA SSS PSS PBU S/F

CD33 Angle Head Fix Door Stop 28 31 50 O/A O/A

2290 Type 2290 Door Stop 10 O/A

2250 Type 2250 Door Stop 15 O/A

CDS101S Magnetic Door Stop & Holder 77 84 O/A

Article No. Description REF BASEArticle No. Description REF BASE

19860501 EM Comfort Line - EMC 600 ALH Single Mag Lock

19860503 EM Comfort Line - EMC 600-2 ALH Double Mag Lock

19860521 L-bracket 600 L-bracket for EMC 600 ALH and EMC 600-2 ALH

19860524 L+Z bracket 600 L+Z bracket for EMC 600 ALH

19860526 Armature plate holder 600 Armature plate holder for EMC 600 ALH

19860529 UBG-10/12 for EMC 600 ALH U-formed glass door bracket for fixing armature plate of EMC 600 ALH on 10/12 mm thick glass doors

168

335

34

98

56

70

(SN)

(SN)

Satin Nickel Plate

Satin Nickel Plate

ON-EAZI SLIDING DOOR SEALS

CDS199.10 Edge Seal 10mm Glass – Cut Size 9.15 17



CDS199.12R Angle Edge Seal 12mm Glass – Cut Size 9.18 29

CDS199B Brush Pile (max 3000mm) – Cut Size 38

Brush Pile Stock Length (3000mm) 114

CDS199M Mohair Pile – Cut Size 3

Article No. Description REF MILL SAA S/F

(Mtr)

(Mtr)

(Mtr)

(Mtr)

(Mtr)

(Mtr)

O/A

O/A

O/A

O/A


SLIDING DOOR SOLUTIONS—

HORIZONTALSLIDING, FOLDINGOR BI-FOLDWALLS—HSW. FSW ‑ POA

Visually appealing and flexible, the DORMA HSW & FSW stacking wall systems provide a transparent multifunctional barrier allowing you to fully open and merge environs bringing the outside in during the day and then secure at night.

• Suitable for 10, 12, 15mm glass• Sliding leaf 150kg’s & Folding leaf 70kg maximum door leaf

weight • Intelligent Directional Roller System – Eazi Slide/Eazi Stack

Highly Adaptable Stacking Configurations• Ability to incorporate Double Acting Sliding Panels –

swing door option• No Floor Tracking – no trip hazard• Wind and water resistant AS2047 compliant

20


HEAVY DUTY GLASS PARTITIONING SOLUTIONS

Article No. Description REF SAA ASSS SSS S/F

CD131-COn-Eazi Wall Fix Partition / Cabinetry Hinge *(Aluminium Similar) 166 169 O/A

12.009.1Universal Pivot Hinge Floor / Ceiling Fix - Door Set 241 307 O/A

12.009.2Universal Pivot Hinge Wall Fix - Door Set 241 307 O/A

CD49On-Eazi Mini Patch Lock including Cylinder 162 O/A

Article No. Description REF SSS PSS S/F

CD212.W/GMIRAGE 90 Degree Wall to Glass Hinge 405 O/A

CD212MIRAGE 180 Degree Glass to Glass Hinge 405 O/A

CD212L/AMIRAGE 135 Degree Glass to Glass Hinge 405 O/A

CD212CMIRAGE 180 Degree Glass to Glass Hinge - Cranked 347 400 O/A

S

218

345

345

345

DISPLAY CASE & CABINETRY SOLUTIONS


GLASS HARDWARE & ACCESSORIES—

21



FITTINGS & ACCESSORIES—

MIRAGE POOL GATE AND FENCE FITTINGS

Article No. Description SSS S/F

CD72P Square Wall / Post Fix Gate Pivot 165 O/A

PT63P Glass Fix Gate Pivot 250 O/A

PT10PBottom Pool Gate Patch for BTS Floor Spring 167 O/A

PT20P Top Pool Gate Patch for Pivot 141 O/A

CDPLMIRAGE Pool Gate Lock & Magna Latch to suit CDPK 270 O/A

CDPKWall / Post Pool Gate Latch Keeper to suit CD65PL 270 O/A

M1-M20 MIRAGE Core Fix Mini Post 180 O/A

M2-SM MIRAGE Surface Fix Mini Post 276 O/A

M1-M20DR MIRAGE Dress Ring to suit M1-M20 16 O/A

CD65PL

CD65PK

MIRAGE Pool Gate Lock & Magna Latch

Glass Side Panel Pool Gate Latch Keeper to suit CD65PL

254 O/A

254 O/A

PSS

265

265

ENTRANCE HANDLES—

23

MADINOZ COMMERCIAL ENTRANCE HANDLES


Article No. Description REF SIZE SSS PSS S/F

MDZ-D6300/V Single Side D Handle with Buttons 300 x 32 83.80 100.60 O/A

MDZ-D6300/U Single Side D Handle with Buttons 400 x 32 87.70 105.20 O/A

MDZ-D6300/S Single Side D Handle with Buttons 600 x 32 95.50 114.70 O/A

MDZ-D6300/Q Single Side D Handle with Buttons 800 x 32 103.30 224.00 O/A

MDZ-B6300/V Back to Back D Handle 300 x 32 129.20 155.20 O/A

MDZ-B6300/U Back to Back D Handle 400 x 32 137.00 164.20 O/A

MDZ-B6300/S Back to Back D Handle 600 x 32 152.90 183.40 O/A

MDZ-B6300/Q Back to Back D Handle 800 x 32 168.40 202.10 O/A

MDZ-CD4/300 Back to Back Offset D Handle 300 x 32 70.00 50.40 O/A

MDZ-CD4/600 Back to Back Offset D Handle 600 x 32 115.00 138.00 O/A

MDZ-D6400/S Single Sided Straight Tubular Handle 600 x 32 324.50 373.20 O/A

MDZ-D6400/N Single Sided Straight Tubular Handle 1100 x 32 344.80 396.40 O/A

MDZ-D6400/I Single Sided Straight Tubular Handle 1600 x 32 365.00 419.80 O/A

MDZ-B6400/S Back to Back Straight Tubular Handle 600 x 32 543.30 624.90 O/A

MDZ-B6400/N Back to Back Straight Tubular Handle 1100 x 32 612.40 704.40 O/A

MDZ-B6400/I Back to Back Straight Tubular Handle 1600 x 32 653.00 757.00 O/A

Madinoz Special Handles, Sizes and Finishes Available

Subject to MDZ Discount Levels = Pricing On [email protected]

(02) 9939 2007www.madinoz.com.au

MDZ-B8380 Back to Back Handle 25X25 Square (Indicative DWG)

625x25 O/A

MDZ-D8380 Disk Fixed Single 25x25 Square (indicative DWG)

625x25 O/A

489.40 489.40

273.50 273.50

(note: subject to Madinoz discount levels)


COMMERCIAL ENTRANCE HANDLES MADINOZ—

24

Door Pull Handles Fixing Options

Drilling Details

Handing Details

back to back fixedsolid or tubular handle

disk fixed - singlesolid or tubular handle

coach bolt fixed - single solid or tubular handle


spacer bolt

washerglassdoor

glassdoor

timberdoor

timberdoor

GD FIX - glass doors

D FIX - glass, metal or timber doors C FIX - timber doors only

TM FIX - timber or metal doors

grubscrew

grubscrew

grubscrew

disk

spacerwasher

coachbolt


disk fixed - singlesolid or tubular handle

coach bolt fixed - single solid or tubular handle


spacer bolt

washerglassdoor

glassdoor

timberdoor

timberdoor

GD FIX - glass doors

D FIX - glass, metal or timber doors C FIX - timber doors only

TM FIX - timber or metal doors

grubscrew

grubscrew

grubscrew

disk

spacerwasher

coachbolt

Nylon spacers and washers are included with handle for glass door fixing option

Timber Door Fixings Metal Door Fixings Glass Door Fixings

Material Size

32mm Ø 32mm Ø

25mm Ø 25mm Ø

19mm Ø 19mm Ø

8mm

8mm

8mm

Bolt Size

16mm Ø 16mm Ø5mm

14mm Ø 14mm Ø5mm

8mm

8mm

8mm

5mm

5mm

Material Size Bolt Size Material Size Hole Size

Madinoz Pty Ltd reserves the right to alter dimensions, designs and materials without notice in the interest of future product development.

32mm Ø 12mm Ø

25mm Ø 12mm Ø

19mm Ø 12mm Ø

16mm Ø 12mm Ø

14mm Ø 12mm Ø


ENTRANCE HANDLES FIXING OPTIONS—

PRICE LIST 2015—Architectural Hardware &Door Closers

PANIC HARDWARE—For Toughened Glass Doors. The combination of DORMA’s PHA 2000 series Panic Exit Devices and custom manufactured Glass Door Hardware allows for Maximum light and space, while still affording unparalleled led safety and reliability - DORMA, Inspirational

27


PHA SERIES ALUMINIUM PANIC DOOR HARDWARE

Article No. Description REF SIZE (W) SIZE (H) SSS S/F

PHA 202CPHA Contour Series - Single Point Modular Panic Device

1000mm 225.15 O/A

PHA 202WCPHA Contour Series - Single Modular Panic Device Point

1300mm 229.57 O/A

PHA 204CPHA Contour Series - Two Point Modular Panic Device

1000mm 2270mm 426.88 O/A

PHA 204HCPHA Contour Series - Two Point Modular Panic Device

1000mm 3400mm 466.30 O/A

PHA 204WCPHA Contour Series - Two Point Modular Panic Device

1300mm 2270mm 431.24 O/A

PHA 204WHCPHA Contour Series - Two Point Modular Panic Device

1300mm 3400mm 470.66 O/A

PHT 01External Lever & Lock Trim for PHA Series Device, suit Euro Cylinder 3501439011001

125.06 O/A

PHT 06External Knob & Lock Trim for PHA Series Device, suit Euro Cylinder3501439061001

98.83 O/A

ABOVE DEVICES ARE NOT FIRE RATED FOR STANDARD DOORSFire Rated Solutions, Additional Device Types, Finishes & Specification Available on Application

Article No. Description REF SIZE (W) SIZE (H) SSS S/F

PHA 2000-201R Panic Kit with Single PointModular Panic Device

1091.85 O/A

PHA 2000-203R 2334.53 O/A

PHA 2000-201P 1091.85 O/A

PHA 2000-203P 2073.16 O/A

PHA 2000-201R PHA 2000-203R

PHA 2000-201P PHA 2000-203P

Panic Kit with Two PointModular Panic Device

Panic Kit with Single PointModular Panic Device

Panic Kit with Two PointModular Panic Device

Class Room Function

Store Room Function

PHA SERIES PANIC DOOR HARDWARE FOR TOUGHENED GLASS DOORS (Lead Time is 15-20 days)


PANIC DOOR HARDWARE—

28Price‑list 2015 PRICES DO NOT INCLUDE GST 28

FLOOR SPRINGS SELECTOR CHART—

Model Size For door For door Back‑ Delayed Latch Hold open Weak Single action or weights up to widths up to check action action coil double action

BTS 65 EN3 100 kg 950 mm No No No 90° H/O specify Yes Universal weak

BTS65 EN4 100 kg 1100 mm No No No 90° H/O specify ‑‑‑ Universal standard

BTS 84 EN 2 100 kg 850 mm No No No 90° H/O specify Yes Universal weak

BTS 84 EN 4 100 kg 1100 mm No No No 90° H/O specify ‑‑‑ Universal standard

BTS 75V EN 1 ‑ 4 120 kg 1100 mm Yes No No 90° H/O specify Adjustable Universal BTS 80 EN 3 300 kg 950 mm Yes Yes No Yes Yes Universal weak

BTS 80 EN 4 300 kg 1100 mm Yes Yes No Yes ‑‑‑ Universal standard

BTS 80 EN 6 300 kg 1400 mm Yes Yes No Yes ‑‑‑ Universal strong

BTS 80F EN 4 300 kg 905 mm Yes No Yes No ‑‑‑ Either/or standard

BTS 80F EN 5 300 kg 1125 mm Yes No Yes No ‑‑‑ Either/or strong

BTS 80F EN 6 300 kg 1280 mm Yes No Yes No ‑‑‑ Either/or extra strong

BTS Model For door For door Back‑ Delayed Latch Electro‑ Swing Single action or weights widths check action action magnetic free double action up to up to hold open

Electro‑Hydraulic Hold‑ Open Floor Spring For Use With Automatic Fire Alarm Systems

EMB 80 EN 4 300 kg 905 mm Yes No Yes Yes ‑‑‑ Either/or EMB 80 EN 5 300 kg 1125 mm Yes No Yes Yes ‑‑‑ Either/or

EMB 80 EN 6 300 kg 1280 mm Yes No Yes Yes ‑‑‑ Either/or

29

BTS 75V Order No. $ each

BTS 75VUniversal Floor Spring for single and double action doors, including cement case and spindle insert

standard with back‑check EN1‑4 61701000 688.09Standard with back‑check and hold‑open 90° (standard type) EN1‑4 61701200 688.09 Universal cover plate 7510V finish: satin stainless steel 46700059 57.00 polished stainless steel 46700006 96.88 brass satin finish 46700159 93.10 polished brass 46700106 134.9075 Cover plate screw pack satin stainless steel 21819001150 8.17 polished stainless steel 21819003150 12.35

BTS 84 Order No. $ each

BTS 84 incl 8410 cover plate SSS

standard EN2 9408112500222 217.19with hold open 90° EN2 9408122500222 217.19standard EN4 9408110000222 217.19with hold open 90° EN4 9408120000222 217.19

BTS 84 floorspring only standard EN2 81125002 197.19with hold open 90° EN2 81225002 197.19standard EN4 81100002 197.19with hold open 90° EN4 81200002 197.19

Universal cover plate 8410 satin stainless steel 46700022 20.00 polished stainless steel 46700021 88.42 brass satin finish 46700023 72.00 polished brass 46700024 110.73BTS84 Cover plate screw pack satin stainless steel 11684000 8.17 polished stainless steel 11685000 12.35


FLOOR SPRINGS BTS65, BTS75V & BTS84

—

30

BTS 80 Order No. $ each

BTS 80Universal Floor Spring for single and double action doors, including cement case and spindle insert

EN3 80120000 713.18 EN4 80110000 713.18 EN6 80130000 713.18Standard with adjustable hydraulichold‑open device (disengageable),delayed action and back‑check Universal cover plate 7410 finish: satin stainless steel 46700000 61.38 polished stainless steel 46700001 112.10 brass satin finish 46700100 102.57 polished brass 46700101 142.5080 Cover plate screw pack satin stainless steel 1167000000 8.17 polished stainless steel 1166900000 12.35

BTS 75V-ATypical examples of complete floor spring and accessories for aluminium doors BTS 75V NHO, 8062, 7422, 7510V & 2300 BTS75VA 948.80 BTS 75V 90 HO, 8062, 7422, 7510V & 2300 BTS75VA90 948.80 finish: satin stainless steel

BTS 80-ATypical examples of complete floor spring and accessories for aluminium doors BTS 80 EN3, 8062, 7422, 7410 & 2300 BTS803A 978.27 BTS 80 EN4, 8062, 7422, 7410 & 2300 BTS804A 978.27 BTS 80 EN6, 8062, 7422, 7410 & 2300 BTS806A 978.27finish: satin stainless steel

BTS 84-ATypical examples of complete floor spring and accessories for aluminium doorsBTS 84 EN2 NHO, 8062, 7422, 8410 & 2300 BTS842A 420.90 BTS 84 EN4 NHO, 8062, 7422, 8410 & 2300 BTS844A 420.90 BTS 84 EN2 90 HO, 8062, 7422, 8410 & 2300 BTS842A90 420.90BTS 84 EN4 90 HO, 8062, 7422, 8410 & 2300 BTS844A90 420.90finish: satin stainless steel

BTS COMBI PACKS Order No. $ each


FLOOR SPRINGS BTS80 & BTS COMBI PACKS

—

31

Order No. $ each

7421 Door strap for double action doors, zinc plated 46010001 46.80

7422 Universal door strap for double action aluminium doors 46010002 85.47

8062 Top centres with needle bearing, diecast 46300003 72.65 max door weight 200kg upper portion 46020031 50.96 lower portion 46020033 41.80

8066 Top centres for double action doors steel for max. door weight 300kg 46300006 100.10 upper portion 46020036 77.90 lower portion 46020047 47.49

Cover plate 8064 finish: stainless steel 46020044 14.71 brass 10000046 23.75 7461 steel, diameter of pin - 13mm 46020050 78.84max door weight 200kg 7463-type B, steel, with needle bearing 46020049 74.12 max door weight 200kg

Pivot set (incl. top pivot with cover plate and bottom strap finish: satin stainless steel 81006148 117.80

Offset Accessories

Bottom door strap 7411/56 screw‑in type, zinc plated,for single action doors ‑ 36mm offset 45010003 70.27

Top centre 7411K/56 screw‑in type, zinc plated, for single action doors ‑ 36mm offset 45300016 178.59

Covers to suitAluminium cover caps for single action accessoriesAluminium anodised silver

7481, single, for 7411/56 left hand 45055400 55.06 right hand 45051400 55.06 7483, set of 2, for 7411K/56 45500401 108.29

DORMA Sealing Compound 2300 45090086 45.59

Note:Where floor springs are usedexternally or are exposed to wetconditions (floor washing etc.)See product information ‑ safety instructions section in this price list clause 2.3

Recommended product


FLOOR SPRINGS BTS ACCESSORIES

—

32

Order No. $ each

Floor pivot bearing 7471 Kwith thrust bearing, without lever 45070001 87.39

Floor pivot bearing 7471 AXwith angular bearing, without lever 45070002 113.99 for max. door weight of 300kg

Floor pivot bearing 7475 AXwith angular bearing, without lever 45070003 113.99for max. door weight of 300kg

Small stainless steel cover plate 7470 for floor pivot bearing Art.‑No. 7471K/AX 46040018 32.29

Cover plate to suit 7475 AX finish: stainless steel 10000105 32.03

Guide housing 7453 N/300 mm 45090053 113.99

Swing lever 7451 N including stainless steel top washer 45090070 125.39

Top washer, Art.-No. 7432, stainless steel 1167100000 7.23

Standard spindle insert Standard spindle insert 45200401 53.17 extended by 5 mm 45200402 60.78 extended by 7.5 mm 45200403 66.49 extended by 10 mm 45200404 70.27 extended by 12.5 mm 45200419 79.80 extended by 15 mm 45200405 93.10 extended by 20 mm 45200406 93.10 extended by 25 mm 45200407 93.10 extended by 30 mm 45200408 93.10 extended by 35 mm 45200409 93.10 extended by 40 mm 45200410 96.88 extended by 45 mm 45200411 96.88 extended by 50 mm 45200412 96.88

Standard spindle 3° Offset for single action doors ISO 6 IS0 5 (L.H) (R.H) Standard 45205418 45201418 53.17 extended by 5 mm 45205420 45201420 60.78 extended by 10 mm 45205404 45201404 70.27 extended by 15 mm 45205405 45201405 93.10 extended by 20 mm 45205406 45201406 93.10 extended by 25 mm 45205407 45201407 93.10 extended by 30 mm 45205408 45201408 93.10

Parts cement box BTS 75V 45090054 68.39 BTS 80 45090056 68.39 BTS 84 1418700000 66.44


FLOOR SPRINGS BTS ACCESSORIES

—

33

Order No. $ each

RTS 85 EN3 For single and double‑action doors (70mm pivot point) non hold‑open 8500 85311101 336.99 hold‑open 105° 8501 85313101 336.99 hold‑open 90° 8502 85312101 336.99

RTS 85 EN4 For single and double‑action doors (70mm pivot point) non hold‑open 8500 85321101 336.99 hold‑open 105° 8501 85323101 336.99 hold‑open 90° 8502 85322101 336.99 RTS 85 EN5 For single and double‑action doors (70mm pivot point) non hold‑open 8500 85331101 336.99 hold‑open 105° 8501 85333101 336.99 hold‑open 90° 8502 85332101 336.99

Accessories for single action doors (70mm pivot point) closer arm with slide channel Art.‑No. 8510 85210001 86.58 closer arm cranked with slide channel Art.‑No. 8510C 85210003 133.42

Accessories for double action doors (70mm pivot point) closer arm side‑load with arm channel Art.‑No. 8530 85210005 75.74closer arm side‑load with angle bracket Art.‑No. 8531 85210007 77.56

end‑load arm Art.‑No. 8534 85210009 93.77

closer arm side‑load to suit timber door 35mm min. thickness Art.‑No. D080.12 D080‑12 185.57

Floor pivot for side‑load installation, 27mm high ‑ timber doors Art.‑No. 8550 65310300 35.16 floor pivot for side‑load installation, 57mm high ‑ aluminium doors Art.‑No. 8551 65410300 43.28

floor pivot for end‑load installation, 27mm high Art.‑No 8552 65320300 36.94

Please specify size of closer and function:

hold open 90° or 105° or

non hold open.

door widthup to...

door width up to...

closer size

exterior doors interior doors

750mm 950mm EN 3

900mm 1050mm EN 4

1050mm 1250mm EN 5F

F Only applies to non hold‑open


TRANSOM CONCEALED DOOR CLOSERS RTS85

—

34

RTS 85 Order No. $ each

RTS 85 Floor pivot with flat spindle non hold‑open (7.5MM) Art.‑No. 8560 G (355.5) 65540000 50.47 with 2.5mm extension 85210033 66.70 with 5mm extension 85210025 66.70 with 10mm extension 85210026 66.70 with 15mm extension 85210027 66.70 with 20mm extension 85210028 66.70 with 50mm extension 85210031 66.70

Packer to suit 355.5 5mm Packer to suit 355.5 10000102 17.24 10mm Packer to suit 355.5 10000103 20.95Cover plate to suit 355.5 stainless steel 10000105 32.03 Fixing bracket for RTS 85 with 70mm pivot point Art.‑No. 8520 65000040 7.76 Fixing adjustment angle bracket 65000041 3.58 Fixing bracket for RTS 85 G with 65mm pivot point Art.‑ No. 8520 G 23906001 7.76 Extension for RTS 85‑40mm Art.‑No. 8521M 85110002 156.88

Cover plate - to suit steel and wooden door frames Art.‑No. RTS85W satin stainless steel 10000051A 66.67 Metal box for mounting RTS 85 into steel frame Art.‑No RTS 85 MB 10000041A 119.02


TRANSOM CONCEALED DOOR CLOSERS RTS85 & RTS84

—

35

Order No. $ each

RTS 85-A NON HOLD OPEN Typical examples of complete transomcloser and accessories for aluminium doors RTS 85 EN3 NHO, 8530, 8551 RTS853A 456.01 RTS 85 EN4 NHO, 8530, 8551 RTS854A 456.01 RTS 85 EN5 NHO, 8530, 8551 RTS855A 456.01

RTS 85-A 90° Hold Open Typical examples of complete transomcloser and accessories for aluminium doors RTS 85 EN3 90° HO, 8530, 8551 RTS853A90 456.01RTS 85 EN4 90° HO, 8530, 8551 RTS854A90 456.01RTS 85 EN5 90° HO, 8530, 8551 RTS855A90 456.01

RTS 85-A 105° Hold Open Typical examples of complete transom closer and accessories for aluminium doors RTS 85 EN3 105° HO, 8530, 8551 RTS853A105 456.01RTS 85 EN4 105° HO, 8530, 8551 RTS854A105 456.01 RTS 85 EN5 105° HO, 8530, 8551 RTS855A105 456.01


TRANSOM CONCEALED DOOR CLOSERS RTS85 COMBI PACKS

—

36

Order No. $ each

TS 6800 NBC EN 2/3/4 Door closer with regular arm complete with P.A.Bracket finish: silver 66400501 98.65

TS 6800 BC EN 2/3/4 Door closer with regular arm and backcheck complete with P.A.Bracket finish: silver 66410501 98.65

TS 6801 EN 2/3/4 Door closer with hold open arm finish: silver 66400801 126.57

Art.-No. 6870 Regular arm finish: silver 66000901 44.84

Art.-No. 6871 Hold open arm finish: silver 66000301 74.76

Art.-No. 6882 Mounting bracket for parallel arm installation finish: silver 66000501 15.83

F


SURFACE CLOSERS RACK & PINION TS68

—

37

TS77 Order No. $ each

TS77 NBC Door closer with regular arm inc. parallel arm bracket TS77 NBC Size 2 Door closer silver 76040101 51.10 TS77 NBC Size 3 Door closer silver 76050101 51.10 TS77 NBC Size 4 Door closer silver 76060101 51.10

TS77 BC Door closer with regular arm and backcheck inc. parallel arm bracket TS77 BC Size 2 Door closer silver DC76221601 57.00 TS77 BC Size 3 Door closer silver DC76231601 57.00 TS77 BC Size 4 Door closer silver DC76241601 57.00

TS79 Order No. $ each

TS 7900 BC EN 2/3/4 Door closer with regular arm and backcheck inc. parallel arm bracket finish: silver 22315701 122.14

TS 7901 BC EN 2/3/4 Door closer with hold open arm inc. parallel arm bracket finish: silver DC22315501 135.15

Standard arm for TS79 finish: silver 22002301 71.16

Hold open arm for TS79 finish: silver 22002501 85.23

Mounting bracket for parallel arm application for TS79 finish: silver 28006601 16.59

F

F


SURFACE CLOSERS RACK & PINION TS77 & TS79

—

38

TS73V Order No. $ each

TS 7300 EN1-4Door closer with regular arm, power adjustable with adjustable backcheck,delayed action, inc. parallel arm bracket finish: silver 37020401 273.56 finish: gold 37020402 273.56

TS 7301 EN1-4Door closer with hold open arminc. parallel arm bracket finish: silver 37023301 327.57 finish: gold 37023302 327.57

TS 7300/ 1 EN1-4Door closer without arm assembly finish: silver 37020101 239.67 finish: gold 37020102 239.67

TS 7300 EN 1-4 DESIGN FINISHDoor closer with full cover and flatform arm(P.A. bracket not included) polished chrome 37271914 435.62 satin stainless steel 37271915 435.62 polished brass 37271916 435.62 F

F

F

finish:


SURFACE CLOSERS RACK & PINION TS73V & TS73 EMF

—

39

Order No. $ each

TS 8300 EN3-6 Door closer with regular arm, power adjustable with adjustable backcheck,delayed action, inc. parallel arm bracket finish: silver 38020801 363.27 finish: gold 38020802 363.27

F

TS 8301 EN3-6 Door closer with hold open arminc. parallel arm bracket finish: silver 38023301 412.62 finish: gold 38023302 412.62

TS 8300/1 EN3-6 Door closer withoutarm assembly finish: silver 38020101 324.91 finish: gold 38020102 324.91

TS 83 EN3-6 BC/AC Door closer with anti‑corrosive arm,power adjustable with adjustable backcheck finish: silver 38030301 445.09 F

F

(P.A. bracket not included, No delayed action function)

TS83 EN7 - 90NM - FIXED Door closer with regular arm finish: silver 83060201 415.89

F (P.A. bracket not included)

TS83 EN 3-6 DESIGN FINISHDoor closer with full cover and flatform arm finish: polished chrome 38141514 539.16 satin stainless steel 38141515 539.16 polished brass 38141516 539.16 F (P.A. bracket not included)


SURFACE CLOSERS RACK & PINION TS83

—

40

Order No. $ each

TS73 Standard arm finish: silver 22002301 71.16 gold 22002302 71.16

TS83 Flatform arm finish: silver 83000101 73.74 gold 83000102 73.74 polished chrome 22003214 132.72 satin stainless steel 22003215 132.72 polished brass 22003216 132.72

TS73 EN1-4/TS83 EN3-6Mounting plate finish: silver 38000101 29.32 gold 38000102 29.32 TS83 EN7 Mounting plate silver 83001101 29.32

Spindle extension/coupler for CL arms finish: zinc plated 83003705 71.92

TS73/TS83 Drop plate finish: silver 38000201 57.16 gold 38000202 57.16

TS73/TS83 Angle bracket finish: silver 38000301 63.60 gold 38000302 63.60

(Not suitable for TS83 EN7)



SURFACE CLOSERS RACK & PINION TS73V & TS83

—

41

Order No. $ each

TS73/TS83 Decorative slide finish: silver 9900038000101 12.19 gold 9900038000102 12.19


DESIGN FINISHFull cover – square line finish: polished chrome 83002114 149.32 satin stainless steel 83002115 149.32 polished brass 83002116 149.32

TS73/TS83 Hold open arm with on/off feature finish: silver 22003001 138.28 gold 22003002 138.28

TS73/TS83 Flat arm installation for limited arm room application finish: silver 83001001 83000901 98.63 gold 83001002 83000902 98.63

Right Hand Left Hand

TS73/TS83 Mounting bracket for parallel arm application finish: silver 28006601 16.59 gold 28006602 16.59 polished chrome 28006614 33.18 satin stainless steel 28006615 33.18 polished brass 28006616 33.18

TS73/TS83 Mounting bracket forparallel arm application with 35mm upstand finish: silver 28006701 43.34 gold 28006702 43.34


SURFACE CLOSERS RACK & PINION TS73V & TS83

—

42

TS 90 IMPULSE EN 3/4 Complete unit including slidechannel with back check finish: silver anodised 10210401 185.42

TS 90 IMPULSE EN 3/4 Angle bracket 10003001 37.62

TS 90 IMPULSE RF HOLD OPEN PIECEWithout on/off feature 10002100 51.42

Limiting stop

10002000 40.12

TS 90 IMPULSE Order No. each

F


SURFACE CLOSERS CAM ACTION TS90

—

PRODUCT INFORMATION, SAFETY INSTRUCTIONS—

1. For controlled door closing devices with hydraulic damping (door closers) mortice locks, door furniture, panic exit devices with horizontal actuating bar and general product information

The following product information and safety instructions are directed to product fabricators and also the operators of swing doors that are equipped with door closers and/or panic exit devices with a horizontal actuating bar. The product information and safety instructions must be carefully read and observed. They contain important advice and recommendations relating to the proper and thus safe fixing and installation of door closers and/or panic locks and also their proper and safe operation, including their maintenance and refurbishment.

2. Controlled door closing devices with hydraulic damping (door closers)

2.1 Designated useDoor closers perform the task of re‑closing swing doors (outwardly or inwardly opening doors) after the manual opening operation. The closing cycle is hydraulically damped, and the degree of damping is adjustable. Door closers are used on swing doors of metal, timber, plastics or glass and also combinations of these materials.

2.2 Functional requirementsThe fault‑free functioning of such systems requires that the doors be installed so that they are vertically plumb and unimpeded in their swing operation, and also that the door closer be properly installed.Consequently, installation of the device and also adjustment and setting of the various functions must be performed by specialist companies taking into account the manufacturer's instructions relating to the specific product and in line with prevailing local structural conditions.

2.3 Use and function in special areas of applicationSpecial areas of application may give rise to additional functional prerequisites. Particular aspects requiring attention include the following:‑ In the case of fire and smoke check doors, the door closers must satisfy the appropriate requirements of AS1905.1 and the NCC regulations.‑ A fixed open position of swing doors shall only be achieved with additional special fittings or with integrated constructional elements, and for fire and smoke check doors these special fittings must be approved.‑ In the case of particularly unfavourable local conditions (wind influence), door closers of a higher spring strength value (higher closing torque) must be installed. Particularly in the case of outward opening swing doors exposed to the wind, door closers with a backcheck function must be installed.‑ Door closers on swing doors for wet rooms (damp areas), for unprotected external installation and for use in environments with aggressive, corrosion promoting air pollutants, and also door closers exposed to extremely high or low temperatures, require special designs.‑ Installation boxes (cement boxes) for floor springs must be protected against contamination after installation. If floor springs are exposed to water penetration, e.g. in the case of wet rooms or external doors without rain or splash protection, the area between the cement box and the floor spring body must be filled with the DORMA 2300 sealing compound. Failure to install 2300 sealing compound will result in a void warranty.

2.4 MisuseThe product is deemed to have been misused if it is used in a manner contravening its designated use.The manufacturer particularly regards the following cases as cases of misuse:‑ Use for purposes other than for closing doors‑ Use of door closers, the size (spring strength) of which does not comply with the recommendations of the manufacturer in relation to the application concerned‑ Use in spite of incorrect or improper installation and/or adjustment. ‑ Use on doors in which the closing range is blocked by obstructions or where the closing cycle is inhibited, e.g. sticking of the seals (seal pressure), rubbing on the floor, non‑aligned hinges or pivot mechanisms.‑ Non‑compliance with the functional prerequisites for operation and use in special areas of application as mentioned under sections 2 and 4.

Consequences of misuse:‑ Functional impairment (door will not close or becomes difficult to open)‑ Destruction of the door closer (e.g. bursting of the door closer body with oil egress)‑ Damage to the door construction (e.g. hinge breakage)‑ Warning: Misuse can also give rise to danger of injury, particularly from doors slamming shut without any damping or delayed action (personal or property hazard)

3. Mortice locks and Door Furniture It is important to note the following information relating to locks. Non‑compliance with the advice and instructions indicated hereunder will release us from any liability, including manufacturer’s liability.

3.1. Product information and designated useA lock usually performs the task of keeping a door secure and locked in its closed position. The term “latching” means keeping a door closed such that it cannot be opened through the application of pull or push forces while at the same time offering ease of opening through the operation of, for example, a lever handle. “Locking” is understood to mean the retention of the door in its closed position by means of a locked latch bolt or deadbolt and engages in a corresponding recess in the frame or in the strike aperture. The latch bolt or deadbolt must be held in its end position, and the opening of the door without a suitable key must be effectively inhibited. Cylinder fixing screws must be adapted to the backset length. A mortice lock is a lock which is inserted and fixed in a preformed or existing recess, and is used predominantly on swing doors. In order to facilitate correct usage, it is necessary also to ensure the correct combination with permissible fittings and locking devices (e.g. keys, cylinders, strike plates) plus accessories (e.g. lever handles, turns or escutcheons). Installation of locks, levers and accessory hardware must be performed in accordance with the relevant fixing instructions and in line ‑ where appropriate ‑ with local and national law requirements or standards. Essentially, cylinders should be installed with the locking cam in the correct position and handing if applicable according to our instructions to achieve the desired function. In all other cases, the manufacturer, dealer, installer or user of such cylinders must be certain that the lock cylinder selected by him is suitable for the installation situation and for the envisaged application.

3.2. MisuseThe misuse ‑ i.e. employment of the product for a purpose other than its designated use ‑ of locks can be said to have occurred if, for example, ‑ foreign objects and/or items not compliant with the designated use are inserted into the lock, or the strike plate, so preventing effective and functionally correct usage, ‑ the lock or strike plate are modified, or force is applied to them, so changing their construction, method of operation or function,‑ the latch bolt is used contrary to its designated use in order to hold open the door.‑ the lock elements are fitted or subsequently treated ‑ e.g. by painting ‑ such that their function is hindered,‑ loads are applied to the lever handle connection that go beyond the designated use and beyond normal manual force,‑ non‑appurtenant ‑ e.g. dimensionally deviant or incorrectly adjusted locking means are used,‑ an extension or reduction occurs in the required door gap due to adjustment of the hinges or lowering of the door,‑ a double door is opened via the inactive leaf where such manipulation has not been approved,‑ body parts are placed between the door leaf and frame when doors are closed,‑ drilling in the lock case area has occurred after the lock has been installed‑ the lever spindle has been forced or hammered into the follower‑ carrying a door by the lever handles ‑ locks and levers not installed in accordance with the installation instructions‑ non matching spindle to follower‑hub dimensions of lock to lever or vice versa



3.3. Product performanceWhere product performance data are not specifically indicated in our catalogues, brochures, performance descriptions, etc., the requirements for the individual locks must be agreed upon with us.The fitness for purpose of locks is dependent, entirely, on frequency of use, methods of operation, environmental influences and the level of care and maintenance applied. Notwithstanding correct lubrication, lock cylinders and keys must be replaced as soon as malfunctions begin to occur on insertion and removal of the key.

3.4. Product maintenanceKey cylinders must be lubricated at least once a year or – depending on frequency of use ‑ more often ‑ employing a recommended lubricant by the cylinder manufacturer or agent. The correct operation and fit of, for example, cylinders, door furniture and other hardware should also be checked and ensured as part of the maintenance routine and any loose screws tightened. As soon as an indication that excessive force or vandalism has been applied to the lock or lever furniture replace these items.

3.5. Duty to inform and instructIn order to fulfill our duties to inform and instruct we urge specialist dealers, locksmiths, architects, specifiers, installers, fabricators and users to avail themselves of the following documents and services, all of which are available on application:‑ catalogues, brochures‑ installation, operating and maintenance instructions‑ advice from us, our agents and representatives and our field service personnel.

For the selection of locks and their installation, operation and maintenance,‑ architects and specifiers are required to request from us all the necessary product information and to comply with its content,‑ specialist dealers are required to observe the requirements indicated in the product information documents and advisory notes in the price lists, and particularly to request from us all the necessary instruction sheets/manuals and pass these on to fabricators, installers and users, ‑ fabricators and installers are required to observe the requirements indicated in all items of product information, and in particular to request from us operating and maintenance instructions, and to pass these on to their clients and users.

4. Panic exit devices with horizontal actuating bar (panic exit devices)

4.1 Designated use‑ Experience gathered in relation to the means of effecting an emergency escape from buildings and general safety considerations make it appear desirable that swing doors installed at exits in buildings and other localities frequented by the public such as theaters, concert halls and other types of buildings that hold a large number of people etc be equipped with panic exit device that include a horizontal actuating bar. Panic exit devices with a horizontal actuating bar are primarily used on swing doors in emergency escape routes in which there is a likelihood of panic situations arising. Although panic exit devices offer adequate security against intrusion from the outside, their main task nevertheless lies in ensuring that the door can be opened at any time by hand or body pressure from the inside via the panic release device (horizontal bar) without the need for a key or any other aid. Notwithstanding any additionally installed locking devices, operation of the actuation bar from the inside must therefore immediately release the door. The intrusion protection offered by such locks is subordinate to the protection they afford to personal safety.

4.2 Functional prerequisitesFault‑free function requires that the doors be installed so that they are vertically plumb and easy to operate, and that the panic lock, including the fittings incorporated in the locking system, is properly installed. Consequently, installation and commissioning must be performed by specialist companies taking into account the manufacturer's instructions relating to the specific product and in line with prevailing local structural conditions. In particular, the requirements of local and national regulations governing the use and installation of panic exit devices.

4.3 Use and function in special areas of applicationSpecial areas of application may give rise to additional functional prerequisites. It is possible for additional products to be included with the device such as external locking trims or electric strikes made by DORMA without effecting the internal escape function when mounted in accordance with the installation instructions. ‑ Panic locks on swing doors for wet rooms and damp areas and for use in environments with aggressive, corrosion‑promoting air pollutants, and panic locks exposed to extremely high or low temperatures must be discussed with DORMA prior to any installation occurring.

4.4 MisuseThe product is deemed to have been misused if it is used in a manner contravening its designated use.The manufacturer particularly regards the following cases as cases of misuse:‑ Use for purposes other than those described under section 4.1.‑ Use of panic exit devices, the specifications of which do not match the area of application concerned and thus contravene the recommendations of the manufacturer concerning application of the panic exit device in line with its designated use.‑ Manipulation of the actuation bar, safety override elements or locking rods‑ Use in spite of incorrect or improper installation and/or adjustment. With the exception of the modifications described and allowed in the manual, no further changes are permissible‑ Use of panic exit devices on doors in emergency escape routes or on fire and smoke check doors which have not been tested and certified according to AS1905.1.‑ Use on doors, the swing range (closing, opening) of which is obstructed or inhibited by e.g. sticking of the seals (seal pressure), rubbing on the floor, non‑aligned hinges.‑ Non‑compliance with the functional prerequisites cited in sections 4.2 and 4.3 in relation to normal operations and also use in special areas of application.

Consequences of misuse:‑ In a panic situation, the panic exit device may either be inoperable or require excessive force on the part of the escapees.‑ The panic lock will not engage properly so that the fire resistance of the fire or smoke check doors (barriers) is adversely affected.‑ Damage to the door construction‑ Warning: Misuse can also be dangerous (accident hazards).

5. General hazards in the area of operation of swing doors

In the case of swing doors, a general injury hazard exists due to the possibility of fingers or other parts of the body being crushed between the frame/architrave and door leaf as the door closes. The controlled closing of swing doors as a designated task of the door closer does not mean that this hazard is eliminated.

6. Product properties

The performance requirements and certificates of conformity for the various products/systems are available from our DORMA sales office at any time.



7. Product maintenance Regular inspection and maintenance forms part of the designated use criterion. The manufacturer considers the following to be necessary:‑ Regular inspection of safety‑relevant components of the products for correct fitting, firm seating and excess wear‑ Examination of the settings relating to, for example, closing speeds, automatic closing functions, release of the locked door panic exit device or mortice lock and lever handle and turn snib functions.‑ Greasing of all moving parts‑ Checking of the ease of movement of the door‑ Inspection of the fixing screws to ensure that they are tight‑ Compliance with statutory inspection, monitoring and maintenance procedures relating to products with special functions (e.g. hold‑open devices, hold‑open systems)‑ In the case of panic exit devices or vestibule mortice locks it is particularly important to check that the safety override elements have not jammed.‑ The scope and frequency of maintenance work shall be aligned to the type and usage of the swing doors concerned. Under average usage/average duty conditions, the manufacturer regards an annual maintenance event as the minimum necessary.

Warning!A lack of product maintenance may result in potential or already existing functional impairments not being identified in good time. The consequences and hazards that can arise are similar to those that may occur in the event of misuse (see sections 2.4, 3.2 and 4.4).

Important!Defective products and/or components must be replaced as soon as their proper function can no longer be assured.Where impairment is suspected, an appropriate specialist company must be engaged for the purpose of inspection and, where appropriate, refurbishment or replacement of the products and/or components. Otherwise, the consequences and hazards that can arise are similar to those that may occur in the event of misuse (see sections 2.4, 3.2 and 4.4)In maintenance work, only those cleaning agents may be used which contain no corrosion‑promoting or otherwise deleterious constituents so as to avoid the danger arises of functional impairment and premature failure of products.

8. Care of finishes

It is recommended that cleaning be done routinely at the minimum once a year and after completion of the initial installation. Products installed in corrosive environments such as marine environments, pool areas and kitchen areas to name a few should be cleaned more regularly. Only those cleaning agents should be used which contain no corrosion‑promoting or damaging constituents. In order to clean external surfaces a soft clean cloth should be used and no abrasive chemical cleaners, metal polishes, abrasive scourers or brushes are to be used at any time. If a liquid cleaner is required only fresh water on its own or at the most a very cool to warm mild detergent mix can be used, salt or bore water are not be used at any time. Some product surfaces are classified as soft finishes such as Polished or Satin Brass, Florentine Bronze, Black Chrome Plate, Polyester Powder Coated and painted surfaces. These finishes should not be allowed to have dust or other contaminants build up on the surfaces as this will result in discoloration and deterioration of the finish and product. If products are required to be lubricated avoid excess running on to finished surfaces as this will cause surface deterioration and further more allow dust particles to adhere. Soft finishes in particular are subject to deterioration under some environmental conditions and through general use such as damage by jewellery on hands and fingers, keys, rough handling during installation and the like. The warranty does not extend to misuse of the finish or fair wear and tear.

9. Supplementary product information available to the user

There is a range of supplementary information available for the user to ensure that the requirements of designated use are not contravened.Such items of information include:‑ Catalogues and brochures‑ Specification texts, tender/quotation/offer documents, installation drawings, installation manuals or operating manuals. ‑ Supplementary product information can also be requested at any time from DORMA Customer Service. Further information such as Australian Standards and Building Codes of Australia can be obtained from these organisations.


ABBREVIATIONS—

A AluminiumAC Anti corrosiveAF Aluminium flat AK Aluminium kinked AX Floor pivot bearing modelB Pull sideBB Ball Bearing BC/ÖD Backcheck BG Slide channel door coordinator push side BSR Door coordinator system for floor spring BTS Floor springsC Concealed fixingCL Classic lines arms (TS 73 & TS 83) DC/SV Delayed-action closingED Automatic swing door operator EM Electro mechanical hold open device EMB Electro hydraulic hold open floor spring EMF Electro-mechanical or electrohydraulic hold open device EMR Electro-mechanical or electrohydraulic hold open device with integrated power pack and smoke detector pack and smokedetector EN European norms (standards)FP Fixed PinG Push sideG-EMR Slide channel with electro mechanical hold open GSR Slide channel door coordinator pull side GSR/BG Slide channel door coordinator push side GSR-EMF1 Slide channel door coordinator with electro-mechanical hold-open in inactive leaf pull side GSR-EMF1 G Slide channel door coordinator with electro-mechanical hold-open in active leaf pull side GSR-EMF2 Slide channel door coordinator with electro-mechanical hold-open in both leaves pull side GSR-EMF2/BG Slide channel door coordinator with electro-mechanical hold-open on push side, hold open in both leavesG96-EMF Electro-mechanical hold open deviceG96-GSR Slide channel door coordinatorG96-GSR-EMF Slide channel door coordinator with electromechanical hold open in both leavesH Handle - D/PullISO International Organisation for StandardisationLED Light Emmitting DiodeLP Loose PinMB Metal Box N Non hold open (eg TS 93) NBC Non BackcheckO/S Offset ITS Concealed cam-action door closerP.A Parallel arm bracket PH Panic Hardware PHA 2000 Crossbar PHB 3000 Pushbar PHT External trim for PHA 2000 & PHB 3000 RF Hold open RTS Transom concealed door closerT Timber TF Timber flat TK Timber kinked TS Door closer V Variable - adjustable strength (TS 73 & BTS 75)V Visible Fixing (310 & 370 series plates)W Wood (RTS 85)

ALUMINIUM

MILL Mill

SAA Clear Anodised

ASSS Satin SS Similar

SSAA Satin Clear Anodised

For Special Anodised, Powder Coated, Plated or SS Finishes please contact us directly for an obligation free quotation.

BRASS

PBU Polished Unlaquered

SCP Satin Chrom Plate

CP Polished Chrome Plate

SNP Satin Nickle Plate

GP Gold Plate

STAINLESS STEEL

SSS Satin

PSS Polishesd

GLOSSARY OF FINISHES

DORMA GmbH + Co. KGDORMA Platz 158256 EnnEPEtAlGERMAnyPhone +49 2333 793-0Fax +49 2333 793-4950www.dorma.com

Layo

ut S

. 6

–

DO

RM

A C

I-2

01

2 •

Eng

lisch

• S

tand

11

.09

.20

12

DORMA_U4-Adressen_CI-2012.indd 6 31.10.12 12:42

DORMA AustraliaHead Office46-52 Abbott RoadHALLAMVictoria 3803Phone 1800 675 411 [email protected]

AM

A0

40

06

, 10

/15, P

RIC

E‑LI

ST

*Sub

ject

to

chan

ge w

itho

ut n

otic

e

Documents

T S I L E C I R P 01 2 5 - W F O'Brienwfobrien.com.au/images/downloads/Dorma_Glass.pdf · BTS - Floor Spring Selector Chart 28 BTS - Floor Springs & Accessories 29-32 RTS - Transom