System500 - Titon · System500 Nørregade 25 • DK-9700 Brønderslev Tel: +45 96 45 56 56 • Hardware System for Doors and windows PN COMBI 500 T e c h n i c a l C at l o g u e

CombiSystem 500

Nørregade 25 • DK-9700 Brønderslev Tel: +45 96 45 56 56 • www.pn-beslag.dk

Hardware System for Doors and windows

PN COM

BI 500

Tech

ni

calCatalogue

TechnicaCatalogu

e

PN reserves the right to make technical changes, updated manuels can be found on our homepage www.pn-beslag.dk

Page Description Latest Rev. date

IndexMaintenance and Lubrication

1 PN COMBI SYSTEM Suggested Standard Profile (with water drip) 28.02.062 PN COMBI SYSTEM Suggested Standard Profile (without water drip) 28.02.06

2a Suggested Standard Profile (Mullion) 08.08.06

2b Suggested Standard Profile (Transom) 08.08.062c Suggested Special Sash Profile (internally glazed) 28.02.063 Side Hung Window - (Butt Hinges) 27.09.10

3a Side Hung Window - (Butt Hinges) Hinge Options 27.09.103b Side Hung Window - (Butt Hinges) Friction Brake 13.09.023c Side Hung Window - (Butt Hinges) Hinges to Size Selection 16.10.073d Side Hung Window - Recommended hingeplacement 05.02.103e Side Hung Window - (Butt Hinges) Maintenance and Lubrication 05.02.104 Side Hung Double Sash Window - (Butt Hinges) 27.09.10

4a Side Hung Double Sash Window - (Butt Hinges) Manufacturing Guide 28.02.064b Side Hung Double Sash Window - (Butt Hinges) Fittings Guide 02.11.044c Side Hung Double Sash Window - (Butt Hinges) Hinges to size Limitations 16.10.075 Side Hung Door - Fittings 27.09.10

5a Side Hung Door 27.09.105b Side Hung Door - Hinge Options 27.09.105c Side Hung Door - Hinges to Size Selection 05.02.105d Side Hung Door - Hinges Latch/Lock 15.12.085e Side Hung Door - Recommended hingeplacement 05.02.105f Side Hung Door - Maintenance and Lubrication 05.02.106 Side Hung Projecting 90° Window - Hinge Options 13.05.09

6a Side Hung Projecting 90° Window - Size Limitations 13.05.096b Side Hung Projecting 90° Window - Size and Fire Escape Openings 13.05.096c Side Hung Projecting 90° Window - Maintenance and Lubrication 08.09.087 Side Swing Window 27.09.10

7a Side Swing Window 13.05.097b Side Swing Window - Fitting Instructions 13.05.097c Side Swing Window - Fitting Instructions 13.05.097d Side Swing Window with Euro-Groove - Fitting Instructions 27.09.107e Side Swing Window with Euro Groove - Fitting Instructions 27.09.107f Side Swing Window - Sizes and Fire Escape Openings 27.09.107g Side Swing Window - Fire Escape Guide 27.09.107h Side Swing Window - Maintenance and Lubrication 27.09.107.5 Side Swing Window 05.02.10

7.5a Side Swing Window 09.07.097.5b Side Swing Window - Fittings Instructions 09.07.09

COMBI 500Index

Updated d. 27.09.10

PN

CO

MB

I S

YS

TE

M


Page Description Latest Rev. date

7.5c Side Swing Window - Fittings Instructions 09.07.097.5d Side Swing Window - Fittings Instructions 09.07.097.5e Side Swing Window - Fire Escape 09.07.097.5f Side Swing Window - Sizes and fire escape openings 27.09.107.5g Side Swing Window - Maintenance and Lubrication 09.07.09

8 Top Hung Window - Hinges 08.09.088a Top Hung Window - Easy Fit Hinge 16.03.068b Top Hung Window - Hinges - Concealed Version 16.03.068d Top Hung Window - Hinges - Support Stay/Window Stay 08.08.068e Top Hung Window - Sizes and Fire Escape 08.08.069 Top Hung Projecting Window - Hinges 08.09.08

9a Top Hung Projecting Window - Size Limitations 08.08.069b Top Hung Projecting Window - Size Limitations double friction 08.08.069c Top Hung Projecting Window - Sizes and Fire Escape 22.10.079d Top Hung Projecting Window - Maintenance and Lubrication 10.12.0710 Top Swing Window - Fitting Instructions 27.09.10

10a Top Swing Window - Additional Machining Requirement 16.03.0610b Top Swing Window 27.09.1010c Top Swing Window - Fitting Instructions 27.09.1010d Top Swing Window - Fitting Instructions 27.09.1010e Top Swing Window - Fitting Instructions 27.09.1010f Top Swing Window - Fitting Instructions 27.09.1010g Top Swing Window - Fitting Instructions 27.09.1010h Top Swing Window - Fitting Instructions 27.09.1010i Top Swing Window - Fitting Instructions 27.09.1010j Top Swing Window - Fitting Instructions 27.09.1010k Top Swing Window - Fitting Instructions 27.09.1010l Top Swing Window - Sizes and Fire Escape Openings 27.09.10

10m Top Swing Window - Maintenance and Lubrication 27.09.1010n Top Swing Window - Egress Guide 27.09.1010o Top Swing Window - Egress Guide 27.09.1011 Accessories - Flush Bolts 08.08.0618 Accessories 10.12.0719 Accessories 28.02.0620 Suggested Timber Profile for Multilight Applications 30.11.0421 Suggested Timber Profile for Multilight Applications 30.11.0422 Suggested Timber Profile for Multilight Applications 30.11.0423 Suggested Timber Profile for Multilight Applications 30.11.0424 Suggested Timber Profile for Multilight Applications 30.11.04

COMBI 500Index

PN

CO

MB

I S

YS

TE

M

Updated d. 27.09.10


PN COMBI SYSTEM 500 is a Hardware System for flexible production of windows and doors. With just a few dispositions you can rationalize produc-tion utilizing your machinery effectively.

Combi 500 Hardware system is for 5 x 16mm groove and for 2.5 x 16mm casement groove. Common profiling for all window types.

When the geraring is no longer functional, it should be disposed of in such a way as to cause minimum environmental impact, in accordance with the re-gulations of your local authority.

All building parts and components must be given periodic maintenance. This also applies to the fit-tings.

The moving parts of builders hardware must be kept lubricated. Use either white neutral grease (vaseline) or neutral oil, e.g. sewing machine oil or Gleitmo 300.

Gliders and aluminium slide rails must not be repainted. They must be kept free of dirt. The re-levant fitting instructions should be followed with respect to lubrication and maintenance.

How often lubrication and maintenance? Builders’ Hardware should be maintained regularly and the frequency will depend on the environment and weather conditions. It is recommended to lubricate as a minimum once a year. Attention must also be paid to other factors leading to corrosion, for example the effects of caustic fluids, air pollution, etc. Fittings used in large towns, industrial atmos-phere, or salty air require special attention due to the greater corrosive effects. The frequency of lubrication and maintenance will have to be more regular than fittings used where the corrosive ef-fect is less.

Note that gliders and slide rails as well as rivets have to be lubricated. However it is not recommended to lubricate friction parts since this will re-duce the friction.

PN COMBI 500 Product Description Where building componenets are regularly main-

tained externally with paint, butt hinges and other fittings (but not gliders and aluminim slide rails) should also be painted, giving a further protec-tion against corrosion to the fittings and therewith increasing their life. Before painting, the fittings should be thoroughly cleaned, and the paint manu-facturer’s instructions followed in pretreatment and selection of paint type. The function of the fittings must of course be preserved when painting.

Note that damage to the surface treatment may occur when using tools on mounted fittings. Brass products will also be affected by corrosion. To main-tain the original colour, parts have to be po- lis-hed regularly. Stainless steel can also be affected and spots that look like rust can be removed by using a stain remover and polish.

Lacquered fittings are maintained by paint ac-cording to the instructions of the paint and colour manufacturer.

Anodized aluminium is cleaned at least once a year. It is recommended to polish the surface with a cloth or sponge. Only neutral solvents and non-scratching material can be used.

When using custom-made fittings, always ask A/S Peder Nielsen Beslagfabrik.

RestrictorsWhere restrictors are supplied either as an inte- gral part of the hardware or as a separate compo-nent as specified. It is essential that the restrictor functions correctly.

After installation the window must be checked for function, and all restrictors and reverse catches should limit the opening or closing of the window. Initial restrictors must hold the window at approx. 100 mm max. and automatically engage and reen-gage when operated.Please control as part of the quality checks before the building is occupied.

Areas with High Corrosive Effect Please be aware of special areas i.e. costal or in-dustrial areas, etc.The contents of salt, acid etc. in the air can be so high that metal parts require regular maintenance and lubrication.

Environment

Maintenance of Fittings

PN HARDWARENørregade 25 . 9700 Brønderslev . Denmark

Tel. +45 96 45 56 56 . Fax +45 96 45 56 57 (Sales +45 96 45 56 58)E-mail: [email protected] - Internet: www.pn-beslag.dk

Timber ProfilePN COMBI 500


Standard Profile(with water drip)

Page 1Latest issue 28.02.03





Standard Profile(without water drip)






Standard ProfileMullion

Page 2aLatest issue 08.08.06





Standard ProfileTransom

Page 2bLatest issue 08.08.06





Standard profileSpecial Sash Profile

Page 2cLatest issue 28.02.06





Side Hung Page 3Latest issue 27.09.10





Side Hung Page 3aLatest issue 27.09.10





Side Hung Page 3bLatest issue 13.09.02





Side Hung Page 3cLatest issue 16.10.07

Sizes of sashes and numbers of hinges

1: Sash weight max. 45 kg

2: Hinges to be fitted using the longest screws possible

3: The glass to be fitted correctly using the "toe and heel" glazing method

1500

1400 3 hinges/leaf

1300

1200

1100

1000

900 2 hinges/leaf

800

700

600

Sash 500

height 400

300 400 500 600 700 800 900

Sash width

Use 2 hinges/leaf

Use 3 hinges/leaf

Emergency egress windows

PN Combi 1170+1174+1193+1194

1500 45 45 45 45 45

1400 45 45 45 45 45

1300 45 45 45 45 45

1200 45 45 45 45 45

1100 45 45 45 45 45

1000 45 45 45 45 45

900 45 45 45 45 45

800 45 45 45 45

700 45 45 45

600 45

Sash 500

height 400

300 400 500 550 600 700 800 900

Sash width

45 Will meet the fire escape regulation of min. 45 cm opening

and H x W = min 0,33 m2

M117091-107





Side Hung Page 3dLatest issue 05.02.10





Side Hung Page 3eLatest issue 05.02.10





Side HungDouble Sash Window




















Sizes of sashes and numbers of hinges




1500

1400 3 hinges/leaf

1300

1200

1100

1000

900 2 hinges/leaf

800

700

600

Sash 500

height 400

300 400 500 600 700 800 900

Sash width

Use 2 hinges/leaf

Use 3 hinges/leaf

Emergency egress windows

PN Combi 1170+1174+1193+1194

1500 45 45 45 45 45

1400 45 45 45 45 45

1300 45 45 45 45 45

1200 45 45 45 45 45

1100 45 45 45 45 45

1000 45 45 45 45 45

900 45 45 45 45 45

800 45 45 45 45

700 45 45 45

600 45

Sash 500

height 400

300 400 500 550 600 700 800 900

Sash width


and H x W = min 0,33 m2

M117091-107





Side Hung Door Page 5Latest issue 27.09.10





Side Hung Door Page 5aLatest issue 27.09.10





Side Hung Door Page 5bLatest issue 27.09.10





Side Hung Door Page 5cLatest issue 05.02.10

PN 1182 + 1183 + 1197 Sizes and number of hinges, instructive

1: Weight of door leaf using 3 hinges max 80 kg

Weight of door leaf using 4 hinges max 90 kg

Weight of door leaf using 5 hinges max 100 kg

2: Glass to be fitted diagonal

3: Supporthinges are recommended for doors

wider than 1m.

4: The table are valid for doors without frictionbrakes, automatic-

openers etc., these can increase the load on the hinges up to 70%

2600

2500 5 pcs/leaf

2400 2300 4 pcs/leaf220021002000 3 pcs/leaf

Door leafheight

700 800 900 1000 1100Door leaf width

M118291-121





Side Hung Door Page 5dLatest issue 15.12.08





Page 5eLatest issue 05.02.10

Side Hung Door





Side Hung Door Page 5fLatest issue 05.02.10





Side Hung Projecting Page 6Latest issue 13.05.09





Side Hung Projecting Page 6aLatest issue 13.05.09





Side Hung Projecting Page 6bLatest issue 13.05.09

PN 3968 + 3969 + 3970 + 0785 Sizes and fire escape openings instructive

1: Sash weight max 45 kg

2: Hinges to be fitted using the longest screws possible3: The glass to be fitted correctly using the "toe and heel" glazing method

1600 45 45

1500 45 45 45

1400 45 45 45 45 45

1300 45 45 45 45 45

1200 45 45 45 45 45

1100 45 45 45 45 45

1000 45 45 45 45 45

900 45 45 45 45 45

775 45 45 45 45

700

600500

Sash 400

height 300

300 400 500 600 650 700 750 800

Sash width

45 Will meet the fire regulation requirement of min 45cm opening

and HxW=min. 0,33 m2

PN 3910 + 3911 + 3958 + 3959 Sizes and fire escape openings instructive




1400

1300

1200

1100

1000

900

800

700

600

500

Sash 400

height 300

300 400 500

Sash width

M396891-103





Side Hung Projecting Page 6cLatest issue 16.03.06





Side Swing Page 7Latest issue 27.09.10





Side Swing Page 7aLatest issue 13.05.09





Side Swing Page 7bLatest issue 13.05.09





Side Swing Page 7cLatest issue 13.05.09





Side Swing Page 7dLatest issue 27.09.10





Side Swing Page 7eLatest issue 27.09.10





Side Swing Page 7fLatest issue 27.09.10





Side Swing Page 7gLatest issue 27.09.10

PN 3962 + 3963 + 3964

PN 7862 + 7863 + 7864

Sizes and fire escape openings, instructive



1200 45 45 45 45 45

1100 45 45 45 45 45

1000 45 45 45 45 45

900 45 45 45 45 45

850 45 45 45 45 45

800 45 45 45

700

600500

Sash 400

height 300

300 400 500 555 650 700 750 822

Sash width

45 Will meet the fire escape regulation of min 45cm opening

and HxW= min. 0,33 m2

M396291-107





Side Swing Page 7hLatest issue 27.09.10





Side Swing Page 7.5Latest issue 05.02.10





Side Swing Page 7.5aLatest issue 09.07.09





Side Swing Page 7.5bLatest issue 09.07.09





Side Swing Page 7.5cLatest issue 09.07.09





Side Swing Page 7.5dLatest issue 09.07.09





Side Swing Page 7.5eLatest issue 09.07.09





Side Swing Page 7.5fLatest issue 27.09.10

PN 3086 - 3093 Sizes and fire escape openings instructive



1200 45 45 45 45

1100 45 45 45 45

1000 45 45 45 45

900 45 45 45 45

800 45 45 45

740 45 45

700

600

500

Sash 400 height 300

300 400 500 600 655 700 800 897300 400 500 600 655 700 800 897

Sash width



M308491-103





Side Swing Page 7.5gLatest issue 09.07.09





Top Hung Page 8Latest issue 08.09.08





Top Hung Page 8aLatest issue 16.03.06





Top Hung Page 8bLatest issue 16.03.06





Top Hung Page 8dLatest issue 08.08.06





Top Hung Page 8eLatest issue 08.08.06

PN 3052 + 3074 Sizes and fire escape1: Sash weight max. 45 kg2: Hinges to be fitted using the longest screws possible

1500 45 45 45 45 45 45 45 1400 45 45 45 45 45 45 451300 45 45 45 45 45 45 451200 45 45 45 45 45 45 45 45 451100 45 45 45 45 45 45 45 45 45 45 45 1000 45 45 45 45 45 45 45 45 45 45 45 45 45

900 45 45 45 45 45 45 45 45 45 45 45 45 45 45800 45 45 45 45 45 45 45 45 45 45 45 45 45 45700 45 45 45 45 45 45 45 45 45 45 45 45 45 45600 45 45 45 45 45 45 45 45 45 45 45 45 45 45500400

Sash 300height 200

200 300 400 500 550 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800Sash width

45 Will meet the fire escape regulation of min. 45 cm opening and HxW= min 0,33 m2

M305291-104






Top Hung Projecting






Top Hung Projecting






Top Hung Projecting






Top Hung Projecting

PN 3925 + 3926 + 3927 Sizes and fire escape1: Sash weight for 3925 + 3926 max. 45 kg

2: Sash weight for 3927 max. 75 kg


1300 45 45 45 45 45 45 45 45 45 45

1215 45 45 45 45 45 45 45 45 45 45

1100 45 45 45 45 45 45 45 45 45

1000 45 45 45 45 45 45 45 45 45

900 45 45 45 45 45 45 45 45

820 45 45 45 45 45 45700600

500

400

Sash 300

height 200

200 300 400 475 600 700 800 900 1000 1100 1200 1300 1400

Sash width



PN 3928 Sizes and fire escape



1020 45 45 45 45 45 45

890 45 45 45 45 45 45 45 45

800 45 45 45 45 45 45 45

700 45 45 45 45 45 45

Sash 600 45 45 45 45 45

height 500

200 300 475 500 600 700 800 900 1000 1100

Sash width



M392591-102





Page 9dLatest issue 10.12.07

Top Hung Projecting






Top Swing






Top Swing





Top Swing Page 10bLatest issue 27.09.10






Top Swing





Page 10dLatest issue 27.09.10

Top Swing





Page 10eLatest issue 27.09.10

Top Swing





Page 10fLatest issue 27.09.10

Top Swing





Top Swing Page 10gLatest issue 27.09.10





Top Swing Page 10hLatest issue 27.09.10





Top Swing Page 10iLatest issue 27.09.10





Top Swing Page 10jLatest issue 27.09.10





Page 10kLatest issue 27.09.10

Top Swing





Page 10lLatest issue 27.09.10

Top Swing

PN 3324 - 3336 Sizes and fire escape openings



1600 45 45 45 45 45 45 45 45 45

1520 45 45 45 45 45 45 45 45 451420 45 45 45 45 45 45 45 45 45 451320 45 45 45 45 45 45 45 45 45 45 45 45

1220 45 45 45 45 45 45 45 45 45 45 45

1120 45 45 45 45 45 45 45 45 45 451020 45 45 45 45 45 45 45 45 45920 45 45 45 45 45 45 45820 45 45 45 45 45735 45 45 45 45

720

620520

Sash 420height 270

200 300 400 475 500 600 740 800 900 1000 1100 1200 1300 1400 1500Sash width

45 Will meet the fire escape regulation of min 45 cm opening and HxW= min 0,33 m2

M332491-102





Page 10mLatest issue 27.09.10

Top Swing





Page 10nLatest issue 27.09.10

Top Swing





Page 10oLatest issue 27.09.10

Top Swing






Accessories






Accessories






Accessories






Accessories






Accessories






Suggested Timber Profilesfor Multilight Applications













Documents

System500 - Titon · System500 Nørregade 25 • DK-9700 Brønderslev Tel: +45 96 45 56 56 • Hardware System for Doors and windows PN COMBI 500 T e c h n i c a l C at l o g u e