1
www.generatorsaustralia.com.au (08) 6258 4195 GENERATORS AUSTRALIA GENERAL ENGINE ALTERNATOR Model Power Type Prime Power (kW/kVA) Standby Power (kW/kVA) Engine Make and Model Engine Type Engine Prime Power (kW) Engine Standby Power (kW) Fuel Oil Fuel Tank Capacity (L) Fuel Consumption (L/h)* Fuel Injection Pressure MPa (kgf/cm 2 ) Coolant Capacity (L) Battery Type Combustion Type Bore (mm) x Stroke (mm) No. of Cylinders Displacement (L) Compression Ratio Steady Governing Type Firing Order Starting System Cooling System Lubricating System Lubricating Oil Lubricating Oil Capacity (L) Intake Resistance kPa (mm/Aq) Back Pressure kPa (mm/Hg) Ho (Heat Rejection to coolant) (kcal/H) *Fuel consumption is based on 75% load Model Frequency (Hz) Continuous Output (kW/kVA) Power Efficiency Type Exciter Type Voltage Regulator Voltage Regulation No. of Phases Insulation Protection Rated Power Factor Stator Winding Winding Pitch Winding Leads Waveform Distortion Altitude (m) YKBT-316/S Diesel 15/18 16.5/19.8 KUBOTA V2203-E2BG Water-cooled, in line, 4 stroke, 1500rpm 17.2 19 Diesel fuel No. 2-D(ASTMD975) 110 4.25 13.73 (140) 7.8 Lead-acid, 1 x 12V - 80AH Spherical type (E-TVCS) 87 x 92.4 4 2.197 23 All speed mechanical governor 1-3-4-2 Starter (with glow plug) Pressurised radiator, forced circulation with water pump Forced-feed lubrication Class CF lubricating oil as per API classification is recommended 9.7 <1.96 (200) <7.07 (53) 21,600 SLG184E1, single bearing IP22 50 18/22.5 81.7% 4 pole, rotating field Brushless, self excited AS440 +1.0% with 4% engine governing 3 phases, 4 wire Class H IP22 0.8 Double layer concentric Two thirds 12 No load <1.5% 1000 STANDARD FEATURES CONTROL SYSTEM QUALITY STANDARDS n 50°C rated radiator n Powder coated finish n 110% bunded skid base with drain valve n All moving parts fitted with safety guards n Waterproof IP65 enclosures n Dust proof electrical components n State of the art control system - Deep Sea The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED. Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1. ASSEMBLY The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti-vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface. WARRANTY POLICY 12 months, 1200 hours as per generator. Global Power Services LLC Warranty Policy. YKBT-316/S SPECIFICATIONS 18kVA UNIT Dimensions L x W x H (m) Dry Weight (kg) Sound at 7m/dB 2.1 x 0.9 x 1.4 1110 73 Powered by Japanese Technology. Australian Design. OPTIONS n 24 hour fuel tank n Door safety interlocks n External fuel tank connections n EVAC service points n IP66 rating outlets n Rated lifted lugs n Emergency E stop n Battery isolator n Fitted sockets RCD protectors n Remote monitoring DSE7320 DSE6020

GENERATORS · Cooling System Lubricating System ... Pressurised radiator, forced circulation with water pump Forced-feed lubrication ... n State of the art control system - Deep Sea

  • Upload
    hakiet

  • View
    219

  • Download
    4

Embed Size (px)

Citation preview

Page 1: GENERATORS · Cooling System Lubricating System ... Pressurised radiator, forced circulation with water pump Forced-feed lubrication ... n State of the art control system - Deep Sea

Generators Australia Pty Ltd retains the right to interpret. www.generatorsaustralia.com.au (08) 6258 4195

GENERATORSAUS T R A L I A

GENERAL

ENGINE

ALTERNATOR

ModelPower TypePrime Power (kW/kVA)Standby Power (kW/kVA)

Engine Make and ModelEngine TypeEngine Prime Power (kW)Engine Standby Power (kW)Fuel OilFuel Tank Capacity (L)Fuel Consumption (L/h)*Fuel Injection Pressure MPa (kgf/cm2)Coolant Capacity (L)Battery TypeCombustion TypeBore (mm) x Stroke (mm) No. of CylindersDisplacement (L)Compression Ratio Steady Governing TypeFiring OrderStarting SystemCooling SystemLubricating SystemLubricating OilLubricating Oil Capacity (L)Intake Resistance kPa (mm/Aq)Back Pressure kPa (mm/Hg)Ho (Heat Rejection to coolant) (kcal/H)*Fuel consumption is based on 75% load

ModelFrequency (Hz)Continuous Output (kW/kVA)Power EfficiencyTypeExciter TypeVoltage RegulatorVoltage RegulationNo. of PhasesInsulationProtectionRated Power FactorStator WindingWinding PitchWinding LeadsWaveform DistortionAltitude (m)

YKBT-316/SDiesel15/1816.5/19.8

KUBOTA V2203-E2BGWater-cooled, in line, 4 stroke, 1500rpm17.219Diesel fuel No. 2-D(ASTMD975)1104.2513.73 (140)7.8Lead-acid, 1 x 12V - 80AHSpherical type (E-TVCS)87 x 92.442.19723All speed mechanical governor1-3-4-2Starter (with glow plug)Pressurised radiator, forced circulation with water pumpForced-feed lubrication Class CF lubricating oil as per API classification is recommended9.7<1.96 (200)<7.07 (53)21,600

SLG184E1, single bearing IP225018/22.581.7%4 pole, rotating fieldBrushless, self excitedAS440+1.0% with 4% engine governing3 phases, 4 wireClass HIP220.8Double layer concentricTwo thirds12No load <1.5%1000

STANDARD FEATURES

CONTROL SYSTEM

QUALITY STANDARDS

n 50°C rated radiatorn Powder coated finishn 110% bunded skid base with drain valven All moving parts fitted with safety guardsn Waterproof IP65 enclosures n Dust proof electrical componentsn State of the art control system - Deep Sea

The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.

Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1.

ASSEMBLYThe engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti-vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface.

WARRANTY POLICY 12 months, 1200 hours as per generator. Global Power Services LLC Warranty Policy.

YKBT-316/S SPECIFICATIONS18kVA

UNIT

Dimensions L x W x H (m)Dry Weight (kg)Sound at 7m/dB

2.1 x 0.9 x 1.4111073

Powered by Japanese Technology. Australian Design.

OPTIONSn 24 hour fuel tankn Door safety interlocksn External fuel tank connectionsn EVAC service pointsn IP66 rating outletsn Rated lifted lugsn Emergency E stopn Battery isolatorn Fitted sockets RCD protectorsn Remote monitoring DSE7320

DSE6020